Filters

List of fibre-glass Tenders

List of latest fibre-glass Tenders in Indian Tenders. Click on any fibre-glass Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for fibre-glass Tenders.

All-Tenders (34)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :35950740 | 01 Dec, 2025

Tender Value : 0

New Delhi - Delhi

Tender for gem bids for car shampoo 250 ml, car tyre polish 500 ml, car bodypolish 230 gm, microfiber cloth, glass cleaner 500 ml, rubbing compound 100 gm, seat cover, window shaderoller type, floor mat 7d type

Central Government/Public Sector

TRN :35950752 | 01 Dec, 2025

Tender Value : 90.0 Thousand

Jhansi - Uttar Pradesh

Tender for gem bids for cement, sand, aggregate, fiber sheet 12 feet x 4 feet, taping screw, welding rod

Central Government/Public Sector

TRN :35951068 | 13 Dec, 2025

Tender Value : 0

Port Blair - Andaman And Nicobar Islands

Tender for gem bids for plaster of paris special dental-grade 1, self-cureacrylic powder clear shade, cold mould seal, waxmodelling base plate wax box of 226.85 gm, plasterdental stone pkt of 1 kg, composition impressionthermoplastic pkt of 5 cakes, inj lignocainehydrochloride 2 percent with adrenalin vial of30ml, paste impression pkt of two tubes containing, material impression alginate pkt in 300 to 500 gms, dual cure luting resinkit syringes of 4-5 ml, sticks tracing red or green soft pkt of 10, rubberbase impression material kit with accessories, elastomeric impression material pkt of light body, suction cleaning solution bott of 1 ltr, wax modelcement box of 10 sticks sticky wax, wire, ss roundhard 1.0 mm coil of 500 gm, tips saliva ejectordisposable pack of 100, desensitising pastestannous fluoride pottasium nitrate, anticariousfluoride rinse mouth wash with sodium, chairsidecomplete denture polishing kit for shp, b.p bladeno 15, alveogyl, bur 702, bur 703, set of sixrotary niti tapered files 25mm length, sectionalmatrix system for composites, hand piece lubricantspray bott of 500 ml-600ml, cloth napkinabsorbent dental disposable 15x15 cm pack of 500, articulating paper, calcium hydroxide withiodoform root canal, cleaner pulp canal set of 6reamers 21mm lengthsize 15-40, 45-80, materialtemporary filling, no mix single phase bott of 25-30gm, material plastic glass ionomer photo curefor lining, material restorative glass ionomertype ii for filling, sol sod hypochlorite 2 percentfor endodontic irrigation bott of 500ml, pointsabsorbent root canal assorted box of 6 tubescontaining assorted sizes, root canal sealerpaste for obturation containing two tubes orpreloaded syringes, universal self etching cumbonding system, set of six hand niti tapered files25mm length complete kit, set of six rotary nititapered files 21mm length, endodontic accessbursb set of 06, k files stainless steel size no 8length 25mm set of 6, k files stainless steel size no10 length 25 mm set of 6, k files stainless steellength 25 mm size no 15 40 set of 6, absorbantcotton roll dental, spray anaesthetic surfacebott of 100ml, root canal preparation gelcontaining 17 percent edta, flowable light curecomposite kit complete of four syringes of 2 4 gm, haemostatic gelatin sponge, bur, round tungstencarbide for fg 1.0 mm, pkt of 3, bur fissure flatcross cut tungsten carbide for fg 1.2mm, burinverted cone tungsten carbide for fg 0, 8mm, burtapering tungsten carbide for fg 1.6mm, gauzeabsorbent, folded 2.5 cm x 100 metres, surgeonsmask disposable, cavity liner calcium hydroxidebased self cure radiopaque, povidone iodinegermicidal gargle 2 percent w v, dental floss, injadrenaline 1 1000, inj pheniramine maleate, injdiazepam 5mg ml, inj dextrose 50 percent, injhydrocortisone 100mg, tourniquet, iv set, ivcannula 16 g, iv cannula 18 g, iv cannula 20g, ivcannula 24g

Central Government/Public Sector

TRN :35953427 | 11 Dec, 2025

Tender Value : 0

Ambala - Haryana

Tender for gem bids for fiber sheet with iron pipe and installation , acp board with led backlit , parking heavy vehicle board printed , timing board printed , hot and cold air conditioner with stabilizer and installation , three seater steel chair , curtain blinds , water dispenser , steel almirah , ceiling lights , aluminum partitions , pvc false ceiling , pvc logo backlit , three seater iron bench , calling bell , red cushion chiar , magazine stand , television , table blazer cloth , flexible pipe

State Government

TRN :35936169 | 11 Dec, 2025

Tender Value : 0

Chennai - Tamil Nadu

Tender for gem bids for repair and overhauling service - frp panel rework; frp mat & resin; yes; buyer premises

corporations/Associations/Others

TRN :35938545 | 27 Nov, 2025

Tender Value : 2.31 Crore

Palghar - Maharashtra

Tender for supplying erecting and commissioning of ctlf ss bridge tube settler module and module ss support flocculator fiber sheet, mbbr lateral ss support sludge sump lateral ss piping with ss support at bolinj 30 mld sewage treatment plant.

Central Government/Public Sector

TRN :35940679 | 29 Nov, 2025

Tender Value : 0

Haridwar - Uttaranchal

Tender for gem bids for stainless chair three seater, water cooler 15 ltr, printer, paint, iron net, fiber sheet .

State Government

TRN :35941047 | 28 Nov, 2025

Tender Value : 1.00 Crore

Bikaner - Rajasthan

Tender for dismantling of existing structures like culverts, bridges, retaining walls, cc road and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by engineer.cement concrete grade m-15 and above and pcc blocks clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to a lead of 50 metres from road boundary including removal and disposal of top organic soil not exceeding 150 mm in thickness as directed by engineer.in area of light jungle silt clearance of drains, channels and canals with lift 1.5 mtr and lead up to 50 mtr. sludge clearance of drains, channels and canals with lift 1.5 mtr and lead up to 50 mtr. "providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level :1:3:6 (1 cement : 3 fine/ coarse sand : 6 graded stone aggregate 20 mm nominal size). " 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto two stories excluding cost of centring, shuttering, finishing and reinforcement : including providing /mixing of synthetic fibers compulsorily complying with is 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of cement i.e. 125 gms per 50 kg cement up to 900 gms per cum of concrete/ mortar. "reinforcement for r.c.c. work at all levels including straightening, cutting, bending, placing in position and binding all complete." centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for :foundations, footings, bases of columns, etc. for mass concrete. wrought iron and mild steel welded work) (using angles, square bars, tees and channel grills, grating frames, gates and tree guards of any size and design etc. including cost of screens and welding rods or bolts and nuts complete fixed in position but without the cost of excavation and concrete for fixing which will be paid separately. providing and fixing of reinforced ferro-cement drain covers designed for 'a' class loading duly marked on cover with adequate steel reinforcement having thickness 75mm to 150mm anti corrosive bitumen painted m.s. plate , rim and m.s. lifting hooks, admixtures like plasticizer, bond improving compound, shrinkage, resistance compound, abrasion resistant complete as per approved design etc.standard size 2100x500mm (150mm thick) for span 1201 to 1500mm brick work with fps bricks of class designation 75 in foundation and plinth in:cement mortar 1:4 (1 cement : 4 coarse sand) cement plastering including t&p, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : 1:4 (1 cement : 4 fine/ coarse sand) providing and laying precast reinforced cement concrete box culvert section of m-40 grade designed for 'aa' class loading as per irc specifications including the effect of impact, eq etc. complete on firm base of 200mm thick lean concrete of m-10 grade with aggregate of size 40mm nominal of following internal sizes. the work includes required safety measures, construction of drain for diversion of flowing water, cost of design of rcc precast box and its proof checking from iit/mnit jaipur etc. complete in all respect as per specifications diversion of flowing water, cost of design of rcc precast box and its proof checking from iit/mnit jaipur etc. complete in all respect as per specifications size 2.00 m x 2.00 m providing, laying, spreading and compacting of granular sub-base by providing close graded material, mixing in a mechanical mix plant at omc, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per mort&h specification clause - 401 including all material, labour, machinery, lighting, guarding and maintenance of diversion.grading - i material providing, laying, spreading (with paver finisher only) and compacting wet mix macadam (wmm) base course comprising of graded stone aggregate and granular material conforming to mort&h specifications (table 400-ii) in layers of equal compacted thickness each consolidated, including pre-mixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tippers to site, laying in uniform layers in base course on a well prepared sub-base/ base course and compacting with power vibratory-roller to achieve the desired density complete as per mort&h specification clause - 406 including all material, labour, machinery, lighting, guarding and maintenance of diversion. providing and applying primer coat over prepared surface of granular base with bitumen emulsion as per is : 8887 and approved quality @ 0.6 kg/sqm with the help of spray set fitted on bitumen container (boiler) after cleaning the surface including removing of binding material and other foreign matter with wire brushes and small picks, sweeping with brooms or soft brushes and finally dusting with old gunny bags and compressed air to receive bituminous treatment complete as per clause 502 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. providing and applying tack coat on the prepared surface with bitumen emulsion as per is: 8887 and approved quality @ 0.2 kg/sqm with the help of spray set fitted on bitumen container (boiler) after cleaning the surface with brooms or soft brushes and finally dusting with old gunny bags and compressed air to receive bituminous treatment complete as per clause 502 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. "providing and laying 50-75 mm compacted thick design mix (approved by engineer) dense bituminous macadam on prepared surface with specified graded crushed aggregates as per table 500-9, 500-10 with bitumen binder set (including cost of anti stripping compound minimum 1% in lime/cement as per design wherever required) for base/ binder course including loading of material with f.e. loader, heating and mixing of stone aggregate, filler and bitumen in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensor control as per clause 504.3.5 to the required level and grade, compacting by power rollers and vibratory rollers or 150 to 250 kn pneumatic tyred roller with tp = 0.7 mpa to achieve the desired density (approximately 2.3 tonne/cum) complete as per clause 507 of mort&h specification but excluding primer/tack coat, including all material, labour, machinery, lighting, guarding and maintenance of diversion.grade-ii with bitumen vg-grade 30 @ 4.25 %, lime filler @ 2% (percent by weight of total mix)" "providing and laying 30-45 mm compacted thickness bituminous concrete as per design mix (approved by engineer) on prepared surface with specified grade stone aggregate as per table - 500-18 with bitumen for wearing course including loading of aggregate with f.e. loader and hot mixing of stone aggregate and bitumen (including cost of anti stripping compound minimum 1% in lime/cement as per design wherever required) in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensing device (as per clause 504-3.5) to the required level and grade and compacting by power rollers and vibratory rollers or 150 to 250 kn pneumatic tyred roller with tp = 0.7 mpa, to achieve the desired density complete as per clause 509 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion but excluding primer/tack coat.grade-ii with bitumen vg-grade 30 @ 6% (percent by weight of total mix)" "earth work in excavation in open area, stp, wtp, pumping station with mechanical means including dressing of sides and ramming of bottoms, including getting out the excavated material, disposal of excavated material lead upto 1000m at suitable site as per as per drawing and as per direction of engineer. (measurements for payment to be done as per standard drawings). above 3.0 m and upto 6.0 m depth" dismantling of existing structures like culverts, bridges, retaining walls, cc road and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by engineer. cement concrete grade m-15 and above and pcc blocks clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to a lead of 50 metres from road boundary including removal and disposal of top organic soil not exceeding 150 mm in thickness as directed by engineer.in area of light jungle silt clearance of drains, channels and canals with lift 1.5 mtr and lead up to 50 mtr. sludge clearance of drains, channels and canals with lift 1.5 mtr and lead up to 50 mtr. "providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level : 1:3:6 (1 cement : 3 fine/ coarse sand : 6 graded stone aggregate 20 mm nominal size). " 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) brick work with fps bricks of class designation 75 in foundation and plinth in: cement plastering including t&p, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : 1:4 (1 cement : 4 fine/ coarse sand) reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto two stories excluding cost of centring, shuttering, finishing and reinforcement : including providing /mixing of synthetic fibers compulsorily complying with is 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of cement i.e. 125 gms per 50 kg cement up to 900 gms per cum of concrete/ mortar. "reinforcement for r.c.c. work at all levels including straightening, cutting, bending, placing in position and binding all complete." centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for :foundations, footings, bases of columns, etc. for mass concrete. wrought iron and mild steel welded work) (using angles, square bars, tees and channel grills, grating frames, gates and tree guards of any size and design etc. including cost of screens and welding rods or bolts and nuts complete fixed in position but without the cost of excavation and concrete for fixing which will be paid separately. providing and fixing of reinforced ferro-cement drain covers designed for 'a' class loading duly marked on cover with adequate steel reinforcement having thickness 75mm to 150mm anti corrosive bitumen painted m.s. plate , rim and m.s. lifting hooks, admixtures like plasticizer, bond improving compound, shrinkage, resistance compound, abrasion resistant complete as per approved design etc.standard size 2100x500mm (150mm thick) for span 1201 to 1500mm dismantling of flexible pavements for sewer line and manholes and disposal of dismantled materials up to a lead of 50 metres as directed by engineer including allowances for any additional dismantling beyond the drawings (measurement for payment to be as per standard drawings), re-handling of material/earth to complete the task. bituminous courses granular courses "providing, laying, spreading and compacting of granular sub-base by providing close graded material, mixing in a mechanical mix plant at omc, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per mort&h specification clause - 401 including all material, labour, machinery, lighting, guarding and maintenance of diversion. grading - i material" providing, laying, spreading (with paver finisher only) and compacting wet mix macadam (wmm) base course comprising of graded stone aggregate and granular material conforming to mort&h specifications (table 400-ii) in layers of equal compacted thickness each consolidated, including pre-mixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tippers to site, laying in uniform layers in base course on a well prepared sub-base/ base course and compacting with power vibratory-roller to achieve the desired density complete as per mort&h specification clause - 406 including all material, labour, machinery, lighting, guarding and maintenance of diversion. providing and applying tack coat on the prepared surface with bitumen emulsion as per is: 8887 and approved quality @ 0.2 kg/sqm with the help of spray set fitted on bitumen container (boiler) after cleaning the surface with brooms or soft brushes and finally dusting with old gunny bags and compressed air to receive bituminous treatment complete as per clause 502 of mort&h specification including all material, labour, machinery lighting, guarding and maintenance of diversion. providing and laying 50-75 mm compacted thick design mix (approved by engineer) dense bituminous macadam on prepared surface with specified graded crushed aggregates as per table 500-9, 500-10 with bitumen binder set (including cost of anti stripping compound minimum 1% in lime/cement as per design wherever required) for base/ binder course including loading of material with f.e. loader, heating and mixing of stone aggregate, filler and bitumen in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensor control as per clause 504.3.5 to the required level and grade, compacting by power rollers and vibratory rollers or 150 to 250 kn pneumatic tyred roller with tp = 0.7 mpa to achieve the desired density (approximately 2.3 tonne/cum) complete as per clause 507 of mort&h specification but excluding primer/tack coat, including all material, labour, machinery, lighting, guarding and maintenance of diversion. grade-ii with bitumen vg-grade 30 @ 4.25 %, lime filler @ 2% (percent by weight of total mix) providing and laying 30-45 mm compacted thickness bituminous concrete as per design mix (approved by engineer) on prepared surface with specified grade stone aggregate as per table - 500-18 with bitumen for wearing course including loading of aggregate with f.e. loader and hot mixing of stone aggregate and bitumen (including cost of anti stripping compound minimum 1% in lime/cement as per design wherever required) in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensing device (as per clause 504-3.5) to the required level and grade and compacting by power rollers and vibratory rollers or 150 to 250 kn pneumatic tyred roller with tp = 0.7 mpa, to achieve the desired density complete as per clause 509 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion but excluding primer/tack coat. grade-ii with bitumen vg-grade 30 @ 6% (percent by weight of total mix)

Central Government/Public Sector

TRN :35943502 | 12 Dec, 2025

Tender Value : 0

Hyderabad - Telangana

Tender for gem bids for a4 size plain paper 80 gsm, a3 papers, eraser, fevistick 15 grams, sticky note pads, box file solola512, scribbling pad, a4 spring file, deluxe register300 pages ruled, highlighter fiber castel, stickfiles solo rc001, white board marker black and greencamlin, ohp marker luxer, fevi kwik, camlin correctionpen, cello tape 1 inch, cello tape 3 inch, scissors big, double tape, file tags big nylon - white, stamp pad ink, binding cover a4 210 x 297 spiral binding sheets a4, drawings pins, luxor permanent marker, apsara pencils, stapler pins 24 by 6, stapler pins small size kangaro no10, big staplers 24 by 6, post it flags, custom madeoffice file with logo printing, double hole punchkangaro dp 800, classmate note book 300 pages, duracell1 5v aa battery, duracell 1 5v aaa battery, binder clips25mm, binder clips 41mm, butterflow blue pens, wallclock, pilot pen v 7 blue, a4 envelopes covers, spiralbinding springs small to big size

Central Government/Public Sector

TRN :35926571 | 29 Nov, 2025

Tender Value : 0

Port Blair - Andaman And Nicobar Islands

Tender for gem bids for glass cleaner 500 ml, hand towel, steel cleaning liquid, room freshner, dustbin with cover combined nos, detergent powder in 1 kg pack, hand wash liquid, disinfectant fluid white black phenoil, cleaning bar forutensils vim 500 g pack, pest seal, fiber duster brush, refill for airfreshner 250 ml pack, mosquito repellent gelodomos, mosquito repelllent machine with liquid, ratsticking gel, spray hand liquid insecticide, distilled water, napthalene balls, plastic mug, bag biodegradable forgarbage, photocopier paper 210 mm x3 25 mm, toiletpaper, brown sheet laminated, paint roller 4 inch, paintroller 7 inch, paint roller 12 inch, distemper white isimark, paint roller 2 inch, photocopier paper 210 mm x 297 mm, dvd, envelope cloth coated 12 inch x 16 inch, envelopecloth coated 10 inch x 14, envelope cloth coated 9 inch x12 inch, tape transparent 2 inch, wonder tape 2, candlewax dia 19 mm, anti rust spray, tape transparent 1 inch, tape insulation 25 mm steel grip, paper napkin, photocopier paper a3, aqua bond putty, wet surface putty, m seal

Related Sub Industries : Glass And Glassware

List of fibre-glass Tenders

Tender for gem bids for car shampoo 250 ml, car tyre polish 500 ml, car bodypolish 230 gm, microfiber cloth, glass cleaner 500 ml, rubbing compound 100 gm, seat cover, window shaderoller type, floor mat 7d type

Tender for gem bids for cement, sand, aggregate, fiber sheet 12 feet x 4 feet, taping screw, welding rod

Tender for gem bids for repair and overhauling service - frp panel rework; frp mat & resin; yes; buyer premises

Tender for supplying erecting and commissioning of ctlf ss bridge tube settler module and module ss support flocculator fiber sheet, mbbr lateral ss support sludge sump lateral ss piping with ss support at bolinj 30 mld sewage treatment plant.

Tender for gem bids for stainless chair three seater, water cooler 15 ltr, printer, paint, iron net, fiber sheet .

Get Fibre Glass Tender Alert...

Related Sub Industries : Glass And Glassware

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us