Filters

List of building-material Tenders

List of latest building-material Tenders in Indian Tenders. Click on any building-material Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for building-material Tenders.

All-Tenders (35)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :36077727 | 30 Dec, 2025

Tender Value : 0

Nagpur - Maharashtra

Tender for gem bids for dismantling the r c c work 1 is to 2 is to 4 and sorting out the materials such as steel etc. , providing and laying cast in situ ready mix cement concrete m-20 of trap - granite - quartzite - gneiss metal for r c c canopy , dismantling the r c c , providing and laying cast in situ , dismantling the r c c work

State Government

TRN :36078502 | 30 Dec, 2025

Tender Value : 0

Mohali - Punjab

Tender for gem bids for supply of stand mounted fabricated prefabricated sub maindistribution board smdb, itc and labelling of floor mountedpre fabricated, supply of surface recess, itc of prefabricated 3 phase 415v 6 way tp surface, supply of prefabricated 240 v rated 6 way, itc of pre fabricated 240 vrate 6 way sp, supply of 4 pole 160a manual changeoverswitch disconnector, itc of 4 pole 160a manualchangeover switch disconnector with terminal shrouds, laying of pvc insulated and pvc sheathed xlpe, laying ofpvc insulated and pvc sheathed xlpe power cable, layingof one number pvc insulated and pvc sheathed xlpe, supply of 4c x 10 sq mm stranded copper conductor, laying of 4c x 10 sq mm stranded copper conductor, supply of indoor end termination, making indoor endtermination, supplying 300 mm width x 50 mm depth x 1 6mm, installing 300 mm width x 50 mm depth x 1 6 mm, supplying 100 mm width x 50 mm depth x 1 6 mm, installing 100 mm width x 50 mm depth x 1 6 mm, supplying 25 mm x 6 mm g i strip, laying 25 mm x 6 mmg i strip, supply of 6 swg dia g i wire, fixing 6 swg dia g iwire, supply of maintenance free earth kit, itc ofmaintenance free earth kit, supply of frls pvc insulatedstranded copper conductor, drawing of frls pvc insulatedstranded copper conductor, supply of 20mm size of isimarked hgms ms black painted conduit, installation of20mm size of isi marked hgms ms black painted conduit, supply of 25mm size of isi marked hgms ms black paintedconduit, installation of 25mm size of isi marked hgms msblack painted conduit, supplying 1 or 2 module75mmx75mm size gi box with modular base, fixing 1 or 2module 75mmx75mm size gi box, supplying 4 module125mmx75mm size gi box, fixing 4 module125mmx75mm size gi box, supplying 6 module /bid number: gem/2025/b/6962998* /dated: 09-12-2025 & & / bid document1 / 49 & & /item category200mmx75mm size gi box, fixing 6 module200mmx75mm size gi box, supplying 8 module125mmx125mm size gi box, fixing 8 module125mmx125mm size gi box, supplying 5 6 amps modularswitch, fixing 5 6 amps modular switch, supplying 3 pin 56 amp modular socket outlet, fixing 3 pin 5 6 amp modularsocket outlet, supplying 15 16 a modular switch, fixing 1516 a modular switch, supplying 6 pin 15 16 a modularsocket, fixing 6 pin 15 16 a modular socket outlet, supplying 3 pin 5 a ceiling rose, fixing 3 pin 5 a ceiling rose, supply of 1 phase 230v 35w or better batten type, installation of 1 phase 230v 35w or better batten, itc ofceiling fan, supply of 300 mm sweep heavy duty sizeexhaust fan, itc of 300 mm sweep, supplying 20 a 240 vspn industrial type socket outlet, fixing 20 a 240 v spnindustrial type socket outlet, supply of 2cx1 5mm2 copperextruded pvc inner sheath armoured, laying of 2cx15mm2 copper extruded pvc inner sheath armoured, supply of addressable photo thermal multi sensor smokedetector ivory, itc of addressable photo thermal multisensor smoke detector ivory, supply of addressable flexmanual call point, itc of addressable flex manual call point, supply of addressable intelligent wall mounted sounderstrobe, itc of addressable intelligent wall mountedsounder strobe, supply of junction box with elmex typeterminal block, installation of junction box at ceiling wallsurface recess, integration of the fire detectors mcpsounders, dismantling of one 01 no existing floor mountedelectrical panels, dismantling of cables of size upto 150 sqmm, dismantling of incoming cables of size 16 35 sq mm, dismantling and removing of existing switchboard industrialsockets, dismantling of existing g i strip upto size of 25mmx 6mm, dismantling of existing conduits sizes 20mm 25mm32 mm, dismantling of existing fire detector mcp sounderfire panel

Central Government/Public Sector

TRN :36079248 | 30 Dec, 2025

Tender Value : 53.35 Crore

Noida - Uttar Pradesh

Tender for gem bids for main desk return desk joining table rhs mobilepedestal oxford cherry back unit oxford cherry presidentcabin rectangular executive desk director cabin meetingtable for president cabin straight-row conference table back unit pedestal main desk with eru rhs table table and wall mounted table required lab item formedical purpose hdu osu main body individualwooden top hdu shutters with cam lock hdu lfcend cover table 5026 with eru 3616 lhs free standingped with castors pemium leather highback chair pemiumleather highback chair for president cabin leather chairstaff chair conference chair low back high back chair visitor chair mid back chair president cabin staff chair president cabin chair director cabin chair modularworkstation four seater end to end screen modular workstation back to back module full back chair mesh backchair venus i frame main in black fabric venus withdesklet lecture hall seating for 180 seating with e classprovision 4 legs with arm without castor table witout cpuhanger table s 1071 flip table modular conferencetable modular plt modular plt 2 str main st modular plt 2 str shared st modular plt 2 str endlh st modular plt 2 str end rh st accessories dsk2waynameplate texbwhite dsk mod doc shelf mblack dsk hdmi wire man mblack conference table 14 seaterta conference table 10 seater ta conference table 6seater ta chair with desklet and arms training room museum racks custom made book rack workstationswith shelf cpu trolley kbpt with mouse tray metal workstation side by side penta table with integratedhdu 4 drawer filing cabinets hole base main loker mngrgl 4 dr cl locker ad grgl 4 dr cl locker 6 dr camlock rectangle shape table rectangle shape file cabinet bid number gem2025b6886683 dated 09-12-2025 bid document1 103 1 1 dining table 4 seater, 3 seater sofa, 1 seater sofa, 3seater sofa, 2 seater sofa, 1 seater sofa, center table, side table, coffee table, corner table in black, chair lightgrey, table rnd corian, book self, 3 seater chair with 4arms, 4 seater chair with 5 arms, 3 str comm arm, t.white, steel almirah with wooden finish, storwel plain, stoolsmch ht adj with back, ayush lite attendant bed, attendantbed mattress, aptis over bed table height adjustable ongas lift with membrane top, metal cot without mattress, attendent bed cum chair, single bed, bedside table, 2door wardrobe, single static push and pull type storagess1, single static push and pull type storage sl1, tm1solid back panel, channels rails p1p2 chnl, wallmounted study table, 6 seater pu coated, cafe chair, chair with arms, dinning table 6 seater glass black, blackdinning chair, reflection 5w linear desk, receptiondesk, nurse station, cash counter, lab, store, kitchen, pantry, toilets, drawer units, supports, table storages, reception table, upbeat cafe table with cube leg putop, flod table worktop, dining table with 30mm thickgranitetop 4 seater excluding chairs 4 seater granite topdining table, curtain track, cubicle or privacycurtain, providing and fiing 900x450 mm beveled edgemirror of superior glass, storage cubical, acousticical gridfalse ceiling, thermocol grid false ceiling, roller blinds, administrative block sls printed fabric ceiling, administrative block veneer ceiling paneling, veneer wallpaneling, fluted veneer wall paneling, nilaya ray skinwall paper pattern, nilaya straight up wall paper pattern, mdf beading with c trim, fluted veneer ceiling paneling, subtex clouds nubby kontour grafix bild, liso spots nanoplus bild, 600x1200x16mm, conceil-a edge, veneer finish, liso spots nano plus bild, 600x1200x16mm, t and g edge, veneer finish, for auditorium astral plus malla clip-inmelange bild, 600x1200mm, hexagonal mesh pattern, forguest house veneer ceiling paneling, for guest housefluted veneer ceiling paneling, for guest house veneerwall paneling, for guest house fluted veneer wall paneling, for guest house nilaya sabyasachi wall paper pattern, for gust house nilaya bolta apex cord wall paper pattern, for guest house mdf beading with c trim, for guest housemarmofresco texture paint, reception table, dining table, wooden dining chair, sofa set supply of 3 seater sofa 1 noand single seater sofa 3 nos, center table, side table, curtains supply and fixing as per detailed drawings, labour, lead and lifts etc, arm chair, 450mm dia side table, kingcot with headboard, single cot with headboard, revolvingchair, arm chair with fabric design, side table with 2drawers, tv ledge, wardrobe, luggage rack, coffee cabin, toilet vanity counter, vanity mirror, pictures, singlemattress hm pocketed et, king mattress hm pocketedet, hair dryer, kettle, tea cup and tray

Central Government And Public Sector

TRN :36079511 | 30 Dec, 2025

Tender Value : 0

Nagpur - Maharashtra

Tender for gem bids for excavation for foundation in earth, soils of all types, sand, gravel, soft murum, providing and laying in situ ready mixcontrolled grade of m 15, providing and laying in situ readymix controlled grade of m20, providing and laying in situready mix m 30, providing and laying in situ ready mix m 30cement, providing and laying in situ ready mix m 30controlled cement concrete, providing and laying in situready mix m 30 plain cement concrete, providing, cutting, bending, hooking, tying and laying in position tmt fe 500, providing reinforced cement concrete crash barrier, providing and applying synthetic enamel paint to crashbarrier, providing and laying of filter media with granularmaterials stone crushed aggregates, providing and layingweep holes of 100 mm dia, providing and laying in-situ m40grade unreinforced plain cement, providing expansionjoints with 25mm thick bituminous pad as per detaileddrawings etc. complete., providing and laying filter materialunderneath pitching in slopes as per drawings and technicalspecifications etc. complete., providing and laying pitchingon slopes laid over prepared filter media, plain cementconcrete 1 is to 3 is to 6 nominal mix in grouting appron, providing and laying boulders apron on river bed forprotection against scour with stone boulders weighing notless than 40kilogrameach complete as per drawings, backfilling behind abutment, wing wall and return wall

State Government

TRN :36079766 | 23 Dec, 2025

Tender Value : 0

Pune - Maharashtra

Tender for gem bids for single bed, bed side table, laminated wardrobe, bookcase with glass shutter, low height storage laminate, low height storage veneer, single seater sofa, two seater sofa, three seater sofa, staff table, office table side runner with drawer laminate, officer table veneer, 6mm thick solid surface, sidetable veneer, rollar blinds, high back chair, mid backchair type 1, mid back chair type 2, public seating chair, visitors chair type 1, visitors chair type 2, veneerwardrobe, staff table, dining table, window rollerfabric blinds, veneer wall panelling

Central Government/Public Sector

TRN :36080127 | 19 Dec, 2025

Tender Value : 0

East Khasi Hills - Meghalaya

Tender for gem bids for cp kitchen sink mixer, wire mesh 0.56 mm 15 mtr each roll, kitchen plate rack stainless steel 31inch x 30inch, hydraulic door closer, fancy curtain rod 3 mtr, fancycurtain bracket, ss wire mesh 0.36 mm dia 15mtr each roll1.40 mm apreture, center hole basin mixer without popupcp, bracket for curtain rod long neck, tower bolt alu 200mm, front glass shelves 500 x 125mm, tower bolt alu 150mm, glass panes 2ft x 4ft x 3mm clear glass, kitchen sinkss 940 x 460 x 203 bowl size 405 x 354 x 203 with drainboard, mortrise lock brass, sliding door bolt alu 250 mm, waste coupling for sink 40 mm, curtain rod 19 oblique20mm 3mtr long, door seal bottom, air gap rubber shield36inch x 93 cm, anti rust, black rubber, m seal in 1 kgpack, kitchen sink 610 x 460 x 203 bowl size 560 x 405 x203, cp grating rectangle slots with round grating atmiddle 150x150mm, c p waste coupling 32 mm., gi wiremesh 0.63 mm dia 15mtr each roll 1.40 mm apreture, tower bolt stainless steel 150 mm, glass pane 2ft x 4ft x4mm frosted glass, cp grating 100mm dia with rectangleslots, sliding door bolt ms 300 mm, kitchen sink bowl size560mm x 405mm x 203mm, pvc waste pipe 40mm for sink900mm long, tower bolt alu 100 mm, helical door springipssa, sliding door bolt alu 300 mm, bow handle alu 100mm, brass bow handle 150mm, brass sliding bolt 300mm, bow handle 150 mm alu, cp grating 100mm dia with onebig hole, butt hinges 100 mm, butt hinges 75 mm, urinalflat back 390x375x590mm, brass sliding bolt 200mm, cpgrating 100mm dia with normal hole, brass tower bolt150mm, brass bow handle 100mm, brass tower bolt100mm, nut and bolt for steel window for fixing of wiremesh, teflon ptfe tape roll thread seal tape, bow handle200 mm alu, door stopper alu, hasp and staple c p 100mm, bow handle 75mm alu, alu handle 125mm, decorative curtain rod finials wooden, ms angle size50x50x4mm 500mm long, knob 32 mm cup board, haspand staple cp 75mm

State Government

TRN :36082572 | 29 Dec, 2025

Tender Value : 0

Ranchi - Jharkhand

Tender for procurement of spare hardware materials for day to day maintenance work at 220/132kv grid sub-station, hatia-ii 555/pr/j.u.s.n.l/2025-26

Central Government/Public Sector

TRN :36073962 | 18 Dec, 2025

Tender Value : 1.50 Lacs

Bhubneshwar - Orissa

Tender for gem bids for multifunction machine mfm v2 q2 * * % % 2 32 3 /mse exemption for years of experienceand turnoveryes | complete& % & % * * % % 2 2 / startup exemption for years ofexperience and turnoveryes | complete 6 6 & & /document requiredfrom sellercertificate requested in atc, additional doc 1 requestedin atc, additional doc 2 requested in atc, additional doc3 requested in atc, additional doc 4 requested in atcin case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer8 8 : : ; ; < < & : & : : : < < ? ?? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?yes documents submitted as part of a clarification orrepresentation during the tender/bid process will also bedisplayed to other participated bidders after log in & & c c d d / minimum number ofbids required to disable automatic bidextension3 d /bid number: gem/2025/b/6961379< /dated: 08-12-2025 & & / bid document1 / 15 < :< : d d, , n n -- / / number of days for which bidwould be auto--extended7 8 8 < < < < / /number of auto extension count1 q %q % <6 <6 < < /bid to ra enabledno6 6 s s /itc available tobuyeryes 2 2 /type of bidtwo packet bid t t & v & v /time allowed for technicalclarifications during technical evaluation7 days w w c c x x w w 2 2 / % % : : ; ; /inspection required byempanelled inspection authority / agenciespre-registered with gemno t t /estimated bid value150000 t t x x /evaluation methodtotal value wise evaluation & & /arbitration clauseno /mediation clauseno //bid details /emd detail c /requiredno /epbg detail c /requiredno < / bid splitting not applied. /mii purchase preference /mii purchase preferenceno /mse purchase preference /mse purchase preferenceyes2 / 15 \ ^ % 2, < t l1+x% /purchase preference to mse oems available uptoprice within l1+x%15 \ ^ 2 2 / maximumpercentage of bid quantity for mse purchasepreference251. if the bidder is a micro or small enterprise as per latest orders issued by ministry of msme, the bidder shall beexempted from the eligibility criteria of experience criteria as defined above subject to meeting of quality andtechnical specifications. the bidder seeking exemption from experience criteria, shall upload the supportingdocuments to prove his eligibility for exemption.2. if the bidder is a micro or small enterprise mse as per latest orders issued by ministry of msme, the biddershall be exempted from the eligibility criteria of bidder turnover as defined above subject to meeting of qualityand technical specifications. if the bidder itself is mse oem of the offered products, it would be exempted fromthe oem average turnover criteria also subject to meeting of quality and technical specifications. the bidderseeking exemption from turnover, shall upload the supporting documents to prove his eligibility for exemption.3. if the bidder is a dpiit registered startup, the bidder shall be exempted from the the eligibility criteria ofexperience criteria as defined above subject to their meeting of quality and technical specifications. the bidderseeking exemption from experience criteria, shall upload the supporting documents to prove his eligibility forexemption.4. if the bidder is a dpiit registered startup, the bidder shall be exempted from the the eligibility criteria ofbidder turnover as defined above subject to their meeting of quality and technical specifications. if the bidderis dpiit registered oem of the offered products, it would be exempted from the oem average turnover criteriaalso subject to meeting of quality and technical specifications. the bidder seeking exemption from turnover shallupload the supporting documents to prove his eligibility for exemption. 5. purchase preference will be given to mses having valid udyam registration and whose credentials arevalidated online through udyam registration portal as defined in public procurement policy for micro and smallenterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises andits subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail themselves of thepurchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders areexcluded from the purview of public procurement policy for micro and small enterprises and hence resellersoffering products manufactured by some other oem are not eligible for any purchase preference. in respect of bidfor services, the bidder must be the service provider of the offered service. relevant documentary evidence inthis regard shall be uploaded along with the bid in respect of the offered product or service and buyer will decideeligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 isnot an mse and mse seller s has / have quoted price within l-1+ 15% selected by buyer of margin ofpurchase preference /price band defined in relevant policy, such mse seller shall be given opportunity to matchl-1 price and contract will be awarded for 25% selected by buyer percentage of total quantity. the buyers areadvised to refer the om no. f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 forcompliance of concurrent application of public procurement policy for micro and small enterprises order, 2012and public procurement preference to make in india order, 2017. benefits of mse will be allowed only if seller isvalidated on-line in gem profile as well as validated and approved by buyer after evaluation of documentssubmitted. 6. estimated bid value indicated above is being declared solely for the purpose of guidance on emd amount andfor determining the eligibility criteria related to turn over, past performance and project / past experience etc.this has no relevance or bearing on the price to be quoted by the bidders and is also not going to have anyimpact on bid participation. also this is not going to be used as a criteria in determining reasonableness ofquoted prices which would be determined by the buyer based on its own assessment of reasonableness andbased on competitive prices received in bid / ra process. if the buyer has mentioned mse purchase preference in atc then service provider is required to uploadnecessary documents for mse purchase preference for verification by the buyer during evaluation.multifunction machine mfm v2 6 pieces v v /technical specifications3 / 15 v / as per gem category speci cation /speci cation v v /specificationname c c t t /bid requirementallowed valuesgenericdescription of storesmultifunction machine printer with minimum 1 year onsite warranty, including cartridge and powercord/adapterprint technologylasertype of printingmonochrome black, colour or higheroperating systemcompatibilitywindows 10 and above, linux, mac os, windowsserverprintingprint paper sizea4 and legalminimum print speed perminute as per iso/iec 24734in a4 size-monochromeblack in ppm21 to 25, 26 to 30, 31 to 35, 36 to 40, 41 to 45, 46 to50, 51 to 55, 56 to 60, 61 to 65, 66 to 70, 71 to 80, 81 to 90, 91 to 100, 101 to 120, 121 to 140, 141 to160, 161 to 180 or higherminimum print speed perminute as per iso/iec 24734in a4 size-colour in ppmnot applicable, 1 to 5, 6 to 10, 11 to 15, 16 to 20, 21to 25, 26 to 30, 31 to 35, 36 to 40, 41 to 45, 46 to 50, 51 to 55, 56 to 60, 61 to 65, 66 to 70, 71 to 80, 81 to90, 91 to 100, 101 to 120, 121 to 140, 141 to 160, 161 to 180 or higherminimum speed per minuteas per iso/iec 24734 in a3size-mono in ppmnot applicable or higherminimum speed per minuteas per iso/iec 24734 in a3size-color in ppmnot applicable or higherauto duplexingprinting/coping 2-sidedfeatureyes or higherscanningmaximum scan areaplaten/flatbed sizea4paper handlingoriginal document feedertype for scanning andcopyingautomatic document feeders adf, reverse/duplexautomatic document feeders radf/dadf, single-pass document feeders spdf or highernumber of main paper tray1connectivityconnectivityusb port, ethernet port, wi-fiadditional specification parameters - multifunction machine mfm v2 6 pieces specification parameternamebid requirement allowed valuesethernet10/100ram128 mb4 / 15 duty cycleminimum 10000 pages per monthwarranty3 years on sitespecification parameternamebid requirement allowed values* bidders offering must also comply with the additional specification parameters mentioned above. 6 < 6 < q %q % 2 2 /input tax credititc and reverse chargercm details 6 < 6 < /itc on gst 6 < 6 < /itc on gst cess100%na //q < c q < c /consignees/reporting officer and quantity6. .6. ./s.no. //q < c q < c /consigneereporting/officer /address /quantity< < < < /deliverydays1arunswamyparshapu751013, central mineplanning and designinstitute limited regionalinstitute vii, plot no e4near gandhi parksamantapuri po rrlbhubaneswar 751013630special terms and conditions-version:4 effective from 31-01-2025 for category multifunctionmachine mfm v21. for buyers1productverificationthe buyer/consignee shall verify the complete product details, includingconfiguration, through the oem website. the buyer/consignee should be able toperform these verifications without needing to create an account on the oem website.2warranty1. the buyer may ensure that as soon as supplies are received, a request for awarranty certificate is made, along with logging into the oem website/callcentre to verify the certificate.2. the product in gem marketplace direct purchase & l1 purchase comes with aminimum standard on site warranty of one year. in case the seller has standardwarranty more than one year, the same may be mentioned in the catalogueincluding in the model name and in such case higher warranty offered shallprevail/supersede the minimum one year warranty.3. buyer shall verify the actual number of prints completed by the multifunctionmachine printer at the time of delivery to ensure that the product has not beenin use prior to delivery to the buyer and may be verified using themultifunction printer s built-in print counter or an equivalent tracking system asavailable with oems.4. buyer may please note that warranty does not cover any consumables i.e.cartridges/toner/ink/developer and such consumables.for sellers5 / 15 oem websitelink/part nofor productverification the oem shall provide the oem website link to the buyer at the time of delivery. theoffered model details/configuration should be available on the oems website. adevice serial number must also be provided at the time of supply, which must also bementioned on the product supplied. the buyer/consignee must be able to verify thecomplete product details, including configuration, through the provided oem websitelink. 4warranty1. the seller shall furnish a valid warranty certificate/tag in physical or digitalformat from the oem to the purchaser, guaranteeing the products coverageunder the specified warranty terms. the warranty certificate should beverifiable through the oem website/customer care centre.2. the warranty period will be valid for the specified number of years or until theprinter reaches the oem-defined minimum number of prints within thewarranty period, whichever is earlier, i.e. once the printer meets either theminimum number of prints within the warranty period or the time durationspecified, the warranty coverage will end.3. the actual number of prints completed by the printer during the warrantyperiod may be verified using the printer s built-in print counter or an equivalenttracking system.5compliance ofextendedproducer sresponsibilitywith effect from 1st april 2023, as per the e-waste rules 2022, epr registration ismandatory for manufacturing entities. therefore, all oems shall hold valid eprregistration, and the registration number should be reflected in the catalogueparameter. oems shall ensure compliance with all responsibilities as per eprregistration applicable from time to time.6 6 ; ; f f/buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period theadditional time shall commence from the last date of extended delivery period. the additional deliverytime shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the originaldelivery period while exercising the option clause. bidders must comply with these terms.2. genericbidder shall submit the following documents along with their bid for vendor code creation: a. copy of pan card. b. copy of gstin. c. copy of cancelled cheque. d. copy of eft mandate duly certified by bank.3. genericdata sheet of the products offered in the bid, are to be uploaded along with the bid documents. buyerscan match and verify the data sheet with the product specifications offered. in case of any unexplainedmismatch of technical parameters, the bid is liable for rejection.4. genericinstallation, commissioning, testing, configuration, training if any - which ever is applicable as per scopeof supply is to be carried out by oem / oem certified resource or oem authorised reseller.6 / 15 . genericmalicious code certificate:the seller should upload following certificate in the bid:-a this is to certify that the hardware and the software being offered, as part of the contract, does notcontain embedded malicious code that would activate procedures to :- i inhibit the desires and designed function of the equipment. ii cause physical damage to the user or equipment during the exploitation. iii tap information resident or transient in the equipment/network.b the firm will be considered to be in breach of the procurement contract, in case physical damage, lossof information or infringements related to copyright and intellectual property right iprs are caused dueto activation of any such malicious code in embedded software.6. genericit equipment shall be ipv6 ready from day one.7. genericthe successful bidder has to supply all essential accessories required for the successful installation andcommissioning of the goods supplied. besides standard accessories as per normal industry practice, following accessories must be part of supply and cost should be included in bid price:vendor has to provide all the necessary items associated with it like cable, toner cartridge etc..8. scope of supplyscope of supply bid price to include all cost components : supply installation testing andcommissioning of goods9. inspectionnominated inspection agency: on behalf of the buyer organization, any one of the followinginspection agency would be conducting inspection of stores before acceptance:pre-dispatch inspection at seller premises applicable only if pre-dispatch inspection clause has beenselected in atc:n/apost receipt inspection at consignee site before acceptance of stores:cmpdi ri vii inspection committe10. buyer added bid specific atcbuyer added text based atc clausesannexure-a specification, minimum for mfd technology: lasercolour: mono/ b&wethernet: 10/100, speed: 20ppm or more, 03 years warrantyram 128 mbprint paper size a4 & legal7 / 15 scan size a4adf yesduplex printing yesduty cycle 10, 000 pages per monthoperating system windows 10 & abovewarranty 3 years onsitedelivery period 30 days. vendor has to provide all the necessary items associated with it like cable, toner cartridge etc.additional points:1.vendor must have registered office/firm/company in &/or around local vicinity of bhubaneswar puri, cuttack, khurda etc. all call logins etc with oem / service centres will be done by the vendor/ vendor representative. vendor should have oem authorization / dealership / partnership for selling the product. 2. technical values of the items supplied /offered by the vendors must be covering all the parameters & their respective values as per annexure a irrespective of bid parameters/values.3. installation will be done by vendor / vendor representative/oem.4. date of acceptance of the material will be counted from the date of completion of installation and fulfilment of all the requirement of the supply order.5. warranty should be backed by oem.checklist: these documents are mandatory to submit while bidding.failure to submit the documents as mentioned below while bidding, will lead to the disqualification in the bidding process.1 registered office/firm/company details address, contact number, gst number.2 previous supply order, preferably one year old from the date of the bid publishing, in support of past performance of the offered model. supply order should be of same offered products model/series in the bidding.3 gst, pan, msme certificate, emd, authorisation, dealership as applicable. msme should be proper relevant category.4 minimum certification to be submitted by the bidder on demand by the user- bis/iec/iso, rohs compliance, malicious code certification from the oem. proven-ness criteria.procurement shall be made only for proven product.the equipment o ered by the tenderer shall be considered proven provided the one nos. of quoted model which includes same series model/equivalent series model or similar equipment, as de ned below, or combination thereof, must have been supplied by the bidder ormanufacturer themselves or through their re seller in case bidder is not the manufacturer in india to mining industry and/or to the other industries private or government/ public sector undertaking and all of them performed satisfactorily for a minimum period of one years from the date of commissioning. the performance of only those equipment would be considered for assessing provenness which have been commissioned 1 years prior to the date of opening of tender but not prior to 5 from the date of opening of tender window period.in case the quoted model or similar equipment has not been supplied by the bidder or manufacturer in case bidder is not the manufacturer in india, or if supplied and commissioned in india, but the same has not completed required years of performance for provenness as mentioned above, theo ered equipment will be considered proven if the minimum worldwide population is of one nos. of o ered or similar equipment or combination thereof which have been commissioned 1 years prio8 / 15 r to the date of opening of tender but not prior to ve from the date of opening of tender and all ofthem performed satisfactorily for a minimum period of one year from the date of commissioning. the worldwide population of the bidder will be considered for provenness only when the bidder gives an undertaking that it has not supplied the quoted model or similar equipment in india or if supplied and commissioned in india, the same has not completed required years of performance for provenness as mentioned above at above sub clause. if the bidder claims provenness of the quoted model based on similar equipment, acceptance criteria for similar equipment shall be as per sub clause below.in case the indigenous manufacturer is quoting the same / similar type & model of the equipment as supplied by their foreign collaborator / foreign principal, worldwide, in the past, and the quoted model of indigenous manufacturer has either not been supplied in india or if supplied and commissioned in india, but the same has not completed the required years of performance for provennessas mentioned above, the quoted model will be considered proven if the minimum worldwide population is of one nos. of quoted model or similar equipment or combination thereof which have beencommissioned 1 years prior to the date of opening of tender but not prior to 5 years in case of from the date of opening of tender and all of them performed satisfactorily for a minimum period of one years from the date of commissioning. however, for worldwide population, foreign collaborator s experience of supplying the offered or similar equipment worldwide shall be considered only if the indigenous manufacturer copy for documents submitted on eprocurement portal / self-certi ed copy for documents submitted in modes other than e-procurement portal of their collaboration agreement with the foreign collaborator which should be valid as on the date of opening of the tender and should also remain valid at least upto supply and commissioning of the last equipment covered in the contract. however, the principal manufacturer will confirm to ensure supply of spares & consumables and service support for smooth running of the equipment throughout its life. further, if any indigenous content is added by the indigenous manufacturer in the quoted model of the equipment, the foreign collaborator will give an undertaking for successful performance of the equipment with the indigenization carried out by the indigenous manufacturer during lifetime of the equipment.in case the indigenous manufacturer is quoting the same / similar type & model of the equipment as supplied by their licensor having valid ipr, for the same type & model of equipment being o ered worldwide in the past and the quoted model of indigenous manufacturer has either not been supplied in india or if supplied and commissioned in india, but the same has not completed therequired years of performance for provenness as mentioned above, the quoted model will be considered proven if the minimum worldwide population is of one nos. of quoted model or similar equipment or combination thereof which have been commissioned 1 years prior to the date of opening of tender but not prior to ve years from the date of opening of tender and all of them performed satisfactorily for a minimum period of one years from the date of commissioning. however, for worldwide population, the bidder s and licensor s experience of supplying the o ered or similar equipment worldwide shall be considered only if the indigenous manufacturer submits copy for documents submitted on e-procurement portal / self-certi ed copy for documents submitted in modes other than eprocurement portal of their license agreement with the company having valid ipr for the equipment being offered, which should be valid as on the date of opening of the tender and should also remain valid at least upto supply and commissioning of the last equipment covered in the contract. the bidder and licensor for the equipment being o ered will also con rm to ensure supply of spares & consumables and service support for smooth running of the equipment throughout its life. further, if any indigenous content is added by the indigenous manufacturer in the quoted model of the equipment, the foreign collaborator will give an undertaking for successful performance of the equipment with the indigenization carried out by the indigenous manufacturer during lifetime of the equipment.indian manufacturing entity of foreign manufacturer and bidding as indigenous manufacturer: in case the indian manufacturing entity of foreign manufacturer who has su cient facility for manufacturing, supply and after sales service of same or similar equipment as supplied by their foreign principal manufacturer worldwide in the past, and the quoted model of indian manufacturing entityhas either, not been supplied in india or if supplied and commissioned in india, the same has not completed the required years of performance for provenness as mentioned above, the quoted model will be considered proven if the minimum worldwide population is of one nos. of o ered model or similar equipment thereof which have been commissioned 1 years prior to the date of opening of tender but not prior to 5 years from the date of opening of tender and all of them have performed satisfactorily for a minimum period of one years from the date of commissioning. however, for worldwide equipment population, the bidder s and principal manufacturer s experience of supplying the quoted or similar equipment worldwide shall be considered only if the indian manufacturing entity submits copy for documents submitted on e-procurement portal / self-certi ed copy for d9 / 15 ocuments submitted in modes other than eprocurement portal of valid legal agreement / collaboration agreement / license agreement / mou with foreign principal manufacturer for the equipment being offered and a declaration from the foreign manufacturer that all related required intellectual property of quoted equipment are accessible by the indian manufacturing entity. further, the foreign manufacturer will give an undertaking for successful performance of the equipment to be manufactured by the indian manufacturing entity during lifetime of the equipment. the bidderand foreign principal manufacturer for the equipment being o ered will also con rm to ensure supply of spares & consumables and service support for smooth running of the equipment throughoutits lifeto encourage the overseas manufacturers to start manufacturing their equipment in india, relaxation in the provenness criteria for same model may be incorporated in nit, subject to the condition that a confirmation by foreign principal manufacturer as well as their indian counterpart shall be submitted that the o ered model is same having identical operation, equal capacity and same driveline/system to their proven foreign model whose documents have been submitted to establish the provenness even if there is a change in the nomenclature. if the bidder claims provenness of the quoted model based on similar equipment, acceptance criteria for similar equipment shall be as per sub clause-below. if the documents are related to the oem or principal, the self certification of oem or principal shall also be required. satisfactory performance means the supplied equipment must have achieved the guaranteed annual availability, if any, as per the performance guarantee clause of the supply orders / contracts for a minimum period of one year from the date of commissioning. in case supply orders / contracts do not have provision for guaranteed annual availability, the bidder will submit satisfactory performance report issued by end users as per benchmark regarding performance of equipment, if any, incorporated in the supply orders / contracts against which these equipment were supplied. in case, the performance reports of the end-users is not available, the bidder shall submit selfcertification claiming satisfactory performance of the equipment supplied. similar equipment shall be such equipment, which fulfills the following: a performs almost identical operations as the quoted model.b should be equal to or higher than the tendered capacity.c uses sub-components, sub-systems and major assemblies of substantially similar design & construction to the model quoted only ratings/ specifications may differ lower or higher. acceptance criteria for similar equipment:in case, the bidder claims provenness of the quoted model based on similar equipment, the similar equipment should have performed satisfactorily for a minimum period of one year from the date of commissioning and the quoted model should have worked for a minimum period of six months from the date of commissioning within the window period of 5 years.in case the bidder claims provenness of the quoted model based on similar equipment and the similar equipment has performed satisfactorily for a minimum period of one year from the date of commissioning, but the quoted model has not worked for a minimum period of six months, the o er may be accepted subject to the conditions mentioned under here under: a. the quoted model should have been designed, manufactured and supplied to the end user but has not been commissioned or if commissioned, has not completed six months of operation after the commissioning. documentary evidence for past supply of the quoted model is to be provided along with the offer.orthe quoted model is an upgraded version of the existing model with improved and the latest driveline/system etc. and has not been manufactured and/or supplied earlier. in such case, the basic model should remain the same. documentary evidence of past supply of the existing model whose upgraded version has been offered, is to be provided along with the offer. b. i the successful bidder will be allowed to supply the quantity or quantity of the rst lot as indicated in schedule of requirement.10 / 15 ii the rm shall be required to furnish additional performance bank guarantee of 100% of the total landed value of equipment along with spares & consumables for warranty period for thequantity. c. on satisfactory performance of all the equipment/ rst lot if applicable for one year from the date of commissioning to be certified by the head of the user dept., clearance shall be obtained from the order issuing authority for supply of the remaining quantity, if any, as per schedule of requirement. d. the additional 100% performance bank guarantee shall be returned only after satisfactory performance of all the equipment/first if applicable lot for one year from the date of commissioning. e. the original 10% pbg for the total contract value will be retained for entire

State Government

TRN :36075149 | 26 Dec, 2025

Tender Value : 10.00 Lacs

Jabalpur - Madhya Pradesh

Tender for supply of hardware/ sanitary material and building materials, various units at ndvsu, adhartal, jablpur 3rd call

Central Government/Public Sector

TRN :36064863 | 15 Dec, 2025

Tender Value : 0

Kamrup - Assam

Tender for gem bids for metal alloy casting water tap with aerator (v2) (q3) , bathroom glass shelf corner with c p railing l 9 inch w 9 inch thick 4mm , bathroom glass shelf corner with c p railing l 12 inch 12 inch thick 5mm , bathroom glass shelf straight with c p railing size 15 mm w 16 inch , pvc bend 110 mm , cp bib cock 2 in1 size 15mm rubal type , cp bib cock long body 15 mm , cp bib cock long nose 15mm , pvc bib cock long body 15mm , butt hinges ms 100mm , butt hinges ms 75 mm , cement in hdpe bags of 50 kgs each 43 gde opc , cement white 1 kg packing , cloth mal mal l 3000mm w 1000mm , pvc connection pipe 15mm dia 450mm with cp coupling , pvc connection pipe size 15mm dia 300 long with cp coupling mm , pvc connection pipe size 15mm dia 600 mm long with coupling , cross tee equal plain pvc 75 mm , cross tee equal pvc 110 mm , curtain rod ss 25mm 20 gauge , distemper oil bound pale cream , distemper washable cream , distemper washable superior white , pvc door bend 110 mm , pvc door bend 75 mm , door handle aluminium 100 mm , door handle aluminium 75mm , fevicol sh , pvc float valve 15 mm , pvc float valve 25 mm , pvc flushing cistern low level 10 ltr capacity complete , french polish , gi elbow 15mm isi mark , gi nipple 15x300mm long , gi nipple 15 dia 50mm long , gi nipple 20 dia 225mm long , gi nipple 20 dia 150mm long , gi plug 15mm dia , gi reducing socket 25 dia 15mm isi mark , gi socket 20 mm , gi socket 15mm isi mark , gi tee equal 15 mm isi mark , gi tee equal 20 mm isi mark , gi tee reducer 15 dia 20 mm isi mark , gi union 15mm isi mark , gi union 20mm isi mark , glass shelve diplomat cp 600 mm long 12 mm wide , glass pane clear 3mm thick l 1 point 20 w 0 point 90 mtr , glass sheet pane 4mm thick l 1200 mm w 900 mm , grating jali plain 100mm ss allieds type , grating floor drain round 100mm, ss anti cockroach allieds type , grating plain 100mm anti cockroach ss allieds type , hasp and stapple alu 100 mm isi mark , hasp and stapple alu 75 mm isi mark , health faucet with hook 1 mtr tube cp , helical door spring 300mm length , hydraulic door closer isi mark , hydraulic door closer heavy duty isi mark , kitchen sink l 36 inch w 18 inch stainless steel with drainage board , kitchen sink l 45 inch w 20 inch stainless steel with drainage board , kitchen stainless steel sinks with single bowl without board size l 24 inch w 18 inches , kitchen steel plate rack l 30 inch w 30 inch kitchen rack ss l 30 inch w 30 inch w 10 inches , m seal , mirror cabinet bathroom pvc 500 mm into 400 mm , mirror looking l 24 inch w 18 inches with pvc frame , paining brush 75 mm , paint enamelled black , paint enamelled og , paint enamelled red po , paint enamelled white , paint red oxide , painting brush 100 mm , painting brush 50mm , plastic felt roll of 20 mtr long 1 mtr wide 30 kgs with membrane 20 1m , plywood l 6ft w 3ft w 12 mm bwr grade , plywood l 8ft w 4ft w 12mm bwr grade , plywood l 8ft w 4ft w 6mm bwr grade , prelaminated mdf board 18 mm 8x4x18mm , prelaminated particle board 8 ft x4 ft x18 mm , pvc urinal waste pipe 40 mm dia 750 or 800 mm long , pvc waste pipe 32 mm 750 or 800 mm long , seat cover plastic for ewc white colour , pvc shower round 150mm dia , shower sandwich rain l 6 inches w 6 inches 150mm long , single lever sink mixer 15mm , sliding door bolt alu 250mm rod dia 16 mm , sliding door bolt ms 250mm rod dia 16 mm , sliding door bolt ms 300mm rod dia 16 mm , cp soap dish , ss holder for curtain rod , super flash strip 50mm width 1 point 5mm thick in a roll of 10 mtrs , swan neck center hole basin mixer single hole 15mm rubal type , thinner , toilet seat type ii wc indian type 580 mm , cp towal ring , towel rail 18mm dia 600mm long , towel rail rack ss 600 long 24 inches , tower bolt alu 100 mm bolt dia 12 mm , tower bolt alu 125 mm bolt dia 12 mm , tower bolt alu 150 mm bolt dia 12 mm , cp wall mixer telephonic with divertor 15mm , cp waste coupling fitting 32mm , pvc waste pipe 32 mm dia for whb , water storage tank 1000 ltr 3 layer isi mark , wire mesh gi width 1200 mm 15 mtr length 0 point 36 mm nominal dia of wire and average width of aperature 1 point 18 mm , cover for water tank 500 or 1000 ltrs

Search Other Industries

List of building-material Tenders

Tender for procurement of spare hardware materials for day to day maintenance work at 220/132kv grid sub-station, hatia-ii 555/pr/j.u.s.n.l/2025-26

Tender for supply of hardware/ sanitary material and building materials, various units at ndvsu, adhartal, jablpur 3rd call

Get Building Material Tender Alert...

Search Other Industries

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us