Filters

List of security-services Tenders

List of latest security-services Tenders in Indian Tenders. Click on any security-services Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for security-services Tenders.

All-Tenders (328)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35761934 | 21 Nov, 2025

Tender Value : 0

Howrah - West Bengal

Tender for hiring of security service by deployment of security personnel/guarding staffs nit-906/sh

Corporations And Associations And Others

TRN :35762471 | 24 Nov, 2025

Tender Value : 0

Panchkula - Haryana

Tender for gem bids for warehousing service - per mt basis - food grain storage;cap hansi; godown without services; hardware by theservice provider, warehousing service - per mt basis - foodgrain storage; cap hansi; godown with servicespreservation, insurance, watch & ward; hardware by theservice provider

Corporations And Associations And Others

TRN :35762496 | 24 Nov, 2025

Tender Value : 0

Panchkula - Haryana

Tender for gem bids for warehousing service - per mt basis - food grain storage;cap pai; godown without services; hardware by the serviceprovider, warehousing service - per mt basis - food grainstorage; cap pai; godown with services preservation, insurance, watch & ward; hardware by the service provider

Corporations And Associations And Others

TRN :35762647 | 24 Nov, 2025

Tender Value : 0

Panchkula - Haryana

Tender for gem bids for warehousing service - per mt basis - food grain storage;cap indri; godown without services; hardware by theservice provider, warehousing service - per mt basis - foodgrain storage; cap indri; godown with servicespreservation, insurance, watch & ward; hardware by theservice provider

Central Government/Public Sector

TRN :35762699 | 21 Nov, 2025

Tender Value : 17.14 Lacs

Tirunelvelli - Tamil Nadu

Tender for gem bids for cost and including gst at 18 percentage for two yearsquantity.., custom bid for services - dcp type fireextinguisher 6 kg with plunger refilling of powder -sodiumbi-carbonate inclusive of labour consumables tools andother cost and including gst at 18 percentage for two yearsquantity 51 numbers, custom bid for services - dcp typefire extinguisher 6 kg with plunger recharging of gascartridge inclusive of labour consumables tools and othercost and including gst at 18 percentage for two yearsquantity 51 numbers, custom bid for services - dcp typefire extinguisher 6 kg with plunger replacement of innercontainer inclusive of labour spares tools and other costand including gst at 18 percentage for two years quantity51 numbers, custom bid for services - dcp type fireextinguisher 6 kg with plunger replacement of union capinclusive of labour spares tools and other cost andincluding gst at 18 percentage for two years quantity 51numbers, custom bid for services - dcp type fireextinguisher 6 kg with plunger replacement of safety pininclusive of labour spares tools and other cost andincluding gst at 18 percentage for two years quantity 51numbers, custom bid for services - dcp type fireextinguisher 6 kg with plunger replacement of dcpcartridge inclusive of labour spares tools and other costand including gst at 18 percentage for two years quantity51 numbers, custom bid for services - dcp type fireextinguisher 6 kg with plunger replacement of rubberwasher inclusive of labour spares tools and other cost andincluding gst at 18 percentage for two years quantity 51numbers, custom bid for services - dcp type fireextinguisher 6 kg with plunger replacement of hose andnozzle inclusive of labour spares tools and other cost andincluding gst at 18 percentage for two years quantity 51numbers, custom bid for services - abc type fireextinguisher 4 kg with gauge quarterly inspection andmaintenance inclusive of labour consumables tools andother cost and including gst at 18 percentage for two yearsquantity 5992 numbers, custom bid for services - abctype fire extinguisher 4 kg with gauge hydraulic pressuretesting inclusive of labour consumables tools and othercost and including gst at 18 percentage for two yearsquantity 499 numbers, custom bid for services - abc typefire extinguisher 4 kg with gauge complete painting withappropriate paint with stenciling stickering inclusive oflabour consumables tools and other cost and including gstat 18 percentage for two years quantity 14.., custom bidfor services - abc type fire extinguisher 4 kg with gaugereplacement of hose and nozzle inclusive of labour sparestools and other cost and including gst at 18 percentage fortwo years quantity 300 numbers, custom bid for services -abc type fire extinguisher 4 kg with gauge nitrogen gasfilling inclusive of labour consumables tools and other costand including gst at 18 percentage for two years quantity499 number, custom bid for services - abc type fireextinguisher 4 kg with gauge mono ammonium phosphatepowder filling inclusive of labour consumables tools andother cost and including gst at 18 percentage for two yearsquantity 300 numbers, custom bid for services - abc typefire extinguisher 4 kg with gauge replacement of pressuregauge inclusive of labour spares tools and other cost andincluding gst at 18 percentage for two years quantity 300numbers, custom bid for services - abc type fireextinguisher 4 kg with gauge replacement of abc valveinclusive of labour spares tools and other cost and //bid details3 / 61 including gst at 18 percentage for two years quantity 300number, custom bid for services - abc type fireextinguisher 4 kg with gauge replacement of safety pininclusive of labour spares tools and other cost andincluding gst at 18 percentage for two years quantity 300numbers, custom bid for services - abc type fireextinguisher 4 kg with gauge replacement of rubberwasher inclusive of labour spares tools and other cost andincluding gst at 18 percentage for two years quantity 300numbers, custom bid for services - abc type fireextinguisher 6 kg with gauge quarterly inspection andmaintenance inclusive of labour consumables tools andother cost and including gst at 18 percentage for two yearsquantity 9600 numbers, custom bid for services - abctype fire extinguisher 6 kg with gauge hydraulic pressuretesting inclusive of labour consumables tools and othercost and including gst at 18 percentage for two yearsquantity 800 numbers, custom bid for services - abc typefire extinguisher 6 kg with gauge complete painting withappropriate paint with stenciling stickering inclusive oflabour consumables tools and other cost and including gstat 18 percentage for two years quantity 24.., custom bidfor services - abc type fire extinguisher 6 kg with gaugereplacement of hose and nozzle inclusive of labour sparestools and other cost and including gst at 18 percentage fortwo years quantity 480 numbers, custom bid for services -abc type fire extinguisher 6 kg with gauge nitrogen gasfilling inclusive of labour consumables tools and other costand including gst at 18 percentage for two years quantity800 numbers, custom bid for services - abc type fireextinguisher 6 kg with gauge mono ammonium phosphatepowder filling inclusive of labour consumables tools andother cost and including gst at 18 percentage for two yearsquantity 480 numbers, custom bid for services - abc typefire extinguisher 6 kg with gauge replacement of pressuregauge inclusive of labour spares tools and other cost andincluding gst at 18 percentage for two years quantity 480numbers, custom bid for services - abc type fireextinguisher 6 kg with gauge replacement of abc valveinclusive of labour spares tools and other cost andincluding gst at 18 percentage for two years quantity 480numbers, custom bid for services - abc type fireextinguisher 6 kg with gauge replacement of safety pininclusive of labour spares tools and other cost andincluding gst at 18 percentage for two years quantity 480numbers, custom bid for services - abc type fireextinguisher 6 kg with gauge replacement of rubberwasher inclusive of labour spares tools and other cost andincluding gst at 18 percentage for two years quantity 480numbers, custom bid for services - water mist and foamtype fire extinguisher 6 lit/10 kg quarterly inspection andmaintenance inclusive of labour consumables tools andother cost and including gst at 18 percentage for two yearsquantity 216 numbers, custom bid for services - watermist and foam type fire extinguisher 6 lit/10 kg hydraulicpressure testing inclusive of labour consumables tools andother cost and including gst at 18 percentage for two yearsquantity 18 numbers, custom bid for services - water mistand foam type fire extinguisher 6 lit/10 kg completepainting with appropriate paint with stenciling stickeringinclusive of labour consumables tools and other cost andincluding gst at 18 percentage for two years.., custom bidfor services - water mist and foam type fire extinguisher 6lit/10 kg replacement of hose and nozzle inclusive of labour //bid details4 / 61 spares tools and other cost and including gst at 18percentage for two years quantity 11 numbers, custom bidfor services - water mist and foam type fire extinguisher 6lit/10 kg nitrogen gas filling inclusive of labourconsumables tools and other cost and including gst at 18percentage for two years quantity 18 numbers, custom bidfor services - water mist and foam type fire extinguisher 6lit/10 kg afff foam filling inclusive of labour consumablestools and other cost and including gst at 18 percentage fortwo years quantity 11 numbers, custom bid for services -water mist and foam type fire extinguisher 6 lit/10 kgreplacement of pressure gauge inclusive of labour sparestools and other cost and including gst at 18 percentage fortwo years quantity 11 numbers, custom bid for services -water mist and foam type fire extinguisher 6 lit/10 kgreplacement of rubber washer inclusive of labour sparestools and other cost and including gst at 18 percentage fortwo years quantity 11 numbers, custom bid for services -water mist and foam type fire extinguisher 6 lit/10 kgreplacement of safety pin inclusive of labour spares toolsand other cost and including gst at 18 percentage for twoyears quantity 11 numbersamc / cmc of fire detection, fire alarm, fire hydrantand sprinkler systemamc / cmc of fire extinguishersamc / cmc of fire detection, fire alarm, fire hydrantand sprinkler systemamc / cmc of fire extinguishersamc / cmc of fire detection, fire alarm, fire hydrantand sprinkler systemamc / cmc of fire extinguishersamc / cmc of fire detection, fire alarm, fire hydrantand sprinkler systemamc / cmc of fire extinguishersamc / cmc of fire detection, fire alarm, fire hydrantand sprinkler systemamc / cmc of fire extinguishersamc / cmc of fire detection, fire alarm, fire hydrantand sprinkler systemamc / cmc of fire extinguishersamc / cmc of fire detection, fire alarm, fire hydrantand sprinkler systemamc / cmc of fire extinguishersamc / cmc of fire detection, fire alarm, fire hydrantand sprinkler systemamc / cmc of fire extinguishersamc / cmc of fire detection, fire alarm, fire hydrantand sprinkler systemamc / cmc of fire extinguishersamc / cmc of fire detection, fire alarm, fire hydrantand sprinkler systemamc / cmc of fire extinguishersamc / cmc of fire detection, fire alarm, fire hydrantand sprinkler systemamc / cmc of fire extinguishersamc / cmc of fire detection, fire alarm, fire hydrantand sprinkler systemamc / cmc of fire extinguishersamc / cmc of fire detection, fire alarm, fire hydrantand sprinkler systemamc / cmc of fire extinguishersamc / cmc of fire detection, fire alarm, fire hydrantand sprinkler systemamc / cmc of fire extinguishersamc / cmc of fire detection, fire alarm, fire hydrant //bid details5 / 61 1 1 /

Corporations And Associations And Others

TRN :35762877 | 24 Nov, 2025

Tender Value : 0

Panchkula - Haryana

Tender for gem bids for warehousing service - per mt basis - food grain storage;cap barara; godown without services; hardware by theservice provider, warehousing service - per mt basis - foodgrain storage; cap barara; godown with servicespreservation, insurance, watch & ward; hardware by theservice provider

State Government

TRN :35763000 | 19 Nov, 2025

Tender Value : 7.63 Crore

Karnal - Haryana

Tender for gem bids for warehousing service - per mt basis - food grain storage; dry /normal warehouse.; godown with services (preservation, insurance, watch & ward); hardware & software by the service provider

Corporations And Associations And Others

TRN :35763238 | 24 Nov, 2025

Tender Value : 0

Panchkula - Haryana

Tender for gem bids for warehousing service - per mt basis - food grain storage;cap jagadhari; godown without services; hardware by theservice provider, warehousing service - per mt basis - foodgrain storage; cap jagadhari; godown with servicespreservation, insurance, watch & ward; hardware by theservice provider

State Government

TRN :35763340 | 10 Nov, 2025

Tender Value : 17.65 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at govt. sss bilona kalan -demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster (ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) internal plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick. plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .6a to 32a rating. 50 a to 63a rating providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 6.0 sq. mm 4 core providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating p & f isi marked (is:3854) 6 amp. flush type non modular switch with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .

State Government

TRN :35763791 | 24 Nov, 2025

Tender Value : 0

Panchkula - Haryana

Tender for gem bids for warehousing service - per mt basis - food grain storage; cap shahabad; godown without services; hardware by the service provider , warehousing service - per mt basis - food grain storage; cap shahabad; godown with services (preservation, insurance, watch & ward); hardware by the service provider

Search Other Industries

List of security-services Tenders

Tender for hiring of security service by deployment of security personnel/guarding staffs nit-906/sh

Tender for gem bids for warehousing service - per mt basis - food grain storage; dry /normal warehouse.; godown with services (preservation, insurance, watch & ward); hardware & software by the service provider

Get Security Services Tender Alert...

Search Other Industries

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us