Filters

List of latest False-Flooring Tenders in Indian Tenders. Click on any False-Flooring Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for False-Flooring Tenders.

All-Tenders (14)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :24295960 | 04 Jun, 2022

Tender Value : 15.00 Lacs

North 24 Paragana - West Bengal

Tender for cement concrete flooring 1:2:4 1 cement : 2 coarse sand : 4 graded stone aggregate finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate. /providing & fixing 2 mm thick homogeneous jointless, scratch resistant, chemical resistant pvc vinyl flooring and skirting/ coving good for laboratories of approved quality including the cost of suitable adhesive of approved quality and manufacture. brands like wonderfloor/ extra over and above item no. 4 of pvc flooring if coving is done including the cost of labour and materials for coving. length of coving shall be measured for payment. / mm cement plaster of mix : 1:6 1 cement: 6 fine sand/ providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. / wall painting with high washable acrylic emulsion paint of approved brand and manufacture to give an even shade : two or more coats on new work/ applying priming coats with primer of approved brand and manufacture, having low voc volatile organic compound content. with water thinnable cement primer on wall surface having voc content less than 50 grams/litre / proving and fixing antibacterial tile false ceiling of size 595x595 with 24 mm powder coated grid ceiling of make armstrong or equivalent as approved by engineer in charge/ providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from m.s. sheets and galvanized with zinc coating of 120 gms/sqm both side inclusive as per is : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate g.i. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to g.i. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long g.i. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the engineer in charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming / providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length / providing and fixing isi marked flush door shutters conforming to is : 2202 part i non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including isi marked stainless steel butt hinges with necessary screws/ providing & fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to is : 2046 type s, including cost of adhesive of approved quality. 1.0 mm thick. / providing and fixing aluminium extruded section body tubular type universal hydraulic door closer having brand logo with isi, is : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm, with double speed adjustment with necessary accessories and screws etc. complete / providing and fixing aluminium sliding door bolts, isi marked anodised anodic coating not less than grade ac 10 as per is : 1868, transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm / providing and fixing aluminium tower bolts, isi marked, anodised anodic coating not less than grade ac 10 as per is : 1868 transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm/ providing and fixing storage cabinets on wall made of 19mm commercial ply, the top and front and external sides shall be laminated with 1.5 mm merino, century laminate and all the rest exposed surfaces polished with spirit polish with drawers and shutter of drawer unit fixed on hinges, drawer channels, locks etc all complete inclusive of all hardware, bottom support etc. overhead cabinet of size 5 l x 8 h x 1 d. / supply & installation of manual recliner chair / providing and fixing working table made of 19mm commercial ply, all sides shall be laminated with 1.5 mm merino, century laminate and all the rest exposed surfaces polished with spirit polish with drawers and shutter of drawer unit fixed on hinges, drawer channels, locks etc all complete inclusive of all hardware, bottom support etc. overhead cabinet of size 5l x 2b x 26h/ 2mm thick lead lining in post patient waiting areas as per aerb /dismantling and repairing work at control room window/ wiring for light point / fanpoint with 1.5 sq.mm. pvc insulated, fire retardant low smoke frls copper conductor cable, single core / multi strand, in steel conduit including supplying & recess laying of ms conduit and accessories including the following and complete as required. supplying and fixing modular type switches in suitable size modular metal boxes, base plate & modular cover plates, space for fixing electronic fan regulator in case of fan point wiring & space for fixing 5a socket on the board etc. i unless otherwise specified all the conduiting work to be done in recess point wiring as mentioned above/ wiring for submain / circuit wiring with following size of pvc insulated frls copper conductor single core/multi strand cable in recessed steel conduit including supply & laying of recessed conduit as required. 2x1.5 sqmm with 1 no. 1.5 sqmm pvc frls insulated, copper conductor for earthing. / wiring for submain / circuit wiring with following size of pvc insulated frls copper conductor single core/multi strand cable in recessed steel conduit including supply & laying of recessed conduit as required. 2x2.5 sqmm with 1 no. 2.5 sqmm pvc frls insulated, copper conductor for earthing. / supplying and fixing suitable module gi box in recess including providing and fixing 3 pin 5/6 amps. modular socket outlet with shutters and 5/6 amps. modular type switch with indicator type, base plate, modular cover plate, connections etc. and all civil works complete as required. / supplying and fixing suitable module metal box in recess including providing and fixing two nos 3 pin 5/6 amps. & two nos. 6 pin 15/16 amp modular socket outlet with shutters and one no. 20 amps. modular indicating type switch, base plate, modular cover plate, connections etc. and all civil works complete as required. / light fixtures and fans / supply of following light fixture with high efficiency electronic ballast, starter, tubes/lamps, capacitor, reflector, diffuser, ms body/housing holder etc. complete with all fixing accessories as required. led recessed flush mounted light fixture philips rc869b led-30s-6500 pse w30l 120 d8 gr size 600x600mm / 1200 mm as per requirment or approved equivalent /supply of following light fixture with high efficiency electronic ballast, starter, tubes/lamps, capacitor, reflector, diffuser, ms body/housing holder etc. complete with all fixing accessories as required. 1x 18 w led round type fluorescent led light fixture approved equivalent / installation, testing and commissioning of prewired, fluorescent fittings of all types, complete with all accessories and tube etc. directly on ceiling/wall, including connections with 1.5 sq.mm. pvc insulated, frls copper conductor, single core/ multi strand cable etc. as required. / supplying drawing, connecting and testing of 0.5mm dia annealed copper conductor pvc insulated pvc sheathed telephone wire/cables in existing m.s/ pvc conduit or a racks as required. 2 pair telephone cable. / supply, fixing, connecting and testing of telephone modular sockets modular plate anodised ms box and blanking plate in surface / recessed including connectionetc as required. telephone socket outlet rj-11 telephone jack single with shutter /conduiting for computer system . supply, laying & testing of cat 5 / 6 utp cable with all termination crimpping etc. / supply, installation, testing and commissioning of automatic analog addressable photo - thermal multicriteria detector with mounting base, alarm led . the detector shall have automatic electronic / dip switch addressing feature & each of these shall be equipped with fault isolator/ external fault isolator complete with the gi mounting box and the hardware etc. as required. ul / en/ vds approved / supply, installation, testing and commissioning of dual led response indicator for indicating the activation of the remotely located detector./ supply and drawing of 2 c x 1.5 sq.mm. sheathed anneled flexible copper conductor frls cable in existing m. s. conduit, complete with termination and testing as per requirement/ earthing with gi plate 600mmx600mmx6mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc., including charcoal or coke and salt complete as required./ supplying and laying 25mmx5mm gi strip at 0.5m below ground level as strip earth electrode, including soldering etc. as required./ supply, installation, balancing and commissioning of factory fabricated gss sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. / supply, installation, testing and commissioning of gi volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications. / supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core./ supplying, fixing testing commissioning of return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core. / supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell nitrile rubber class o insulation on existing duct after applying two coats of cold setting adhesive cpr x compound. the joints shall sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required. / supplying and fixing of nitrile rubber class o insulation on existing ceiling after applying two coats of cold setting adhesive cpr x compound. / medical graded copper pipes shall be solid drawn, tempered, seamless, phosphorous deoxidized, non-arsenic and degreased for oxygen service. the chemical composition shall be as per bs-6017: 1981 table 2, cu-dhp grade. distribution copper pipe manufactured as per bsen:13348 :2008 complete with dew point apparatus and carbon monoxide monitoring facility ./ medical graded copper pipes shall be solid drawn, tempered, seamless, phosphorous deoxidized, non-arsenic and degreased for oxygen service. the chemical composition shall be as per bs6017: 1981 table 2, cu-dhp grade. distribution copper pipe manufactured as per bsen:13348 :2008 complete with dew point apparatus and carbon monoxide monitoring facility as per specifications./ alarm panel to indicate any abnormality of gas pressures and other failures of the system. the alarm system shall be complete with digital display, sensor module and power supply. the alarm shall be complete with all indications controls, wirings, accessories etc. complete as required and as per specifications./ oxygen flowmeter with humidifier imported0-15 litres/minute with adapter, tubing etc. complete with all the required accessories and shall be complete as per specifications/ ward vacuum unit wall mounted type complete with all accessories as required and as per specifications.

Central Government/Public Sector

TRN :24297124 | 26 May, 2022

Tender Value : 19.16 Lacs

Bangalore - Karnataka

Tender for replacing existing false flooring in 4m tdacs server room and tvac and ccf lab 1st floor main building at ursc campus vimanapura

Central Government/Public Sector

TRN :24290627 | 19 May, 2022

Tender Value : 54.35 Lacs

Trichy - Tamil Nadu

Tender for upgradation of epfo office in sree complex anandha building d wing second floor at madurai road, trichy sh: 1 renovation of rpfc, apfc and secretariate, conference hall including false ceiling, vitrified flooring, double skinned partition and replacing unserviceanle ms windows with upvc windows. sh2: iei works and fans.

corporations/Associations/Others

TRN :24267513 | 25 May, 2022

Tender Value : 15.16 Lacs

Bankura - West Bengal

Tender for miscellaneous internal refurbishing work of aluminium framing, particle board, glaze paneling, false ceiling and false flooring etc. including repair of door window at various office building, btg control rooms and other plc control rooms.

corporations/Associations/Others

TRN :24267692 | 23 May, 2022

Tender Value : 0

Bhandara - Maharashtra

Tender for supply of acoustical wooden panel , aluminum powder , acoustical echo bloc , mort hand wearing laminate , podium tables , digital board , air conditioner , desktop , camera , dlink cat 6 bundle , rj 45 , giga swich poe , microphone , amplifier , loudspeaker , equipment rack , microphone cable , speaker cable , xlr connector , smart interactive board , ro , relief artwork on wall in fibre material , acoustical doors , clothe lockers , full hight steel storage , executive table , free standing table , pedestal unit , credestal , conference table , medium height partition , revolving chair , moduler false celing , book case , interior wall finish luster , three coats water proof cement paint , matt finished tiles , steel work in trusses , coated zincalume , panel of aluminium , exterior designer cement , flooring , toilet at elibrary

Central Government/Public Sector

TRN :24271218 | 27 May, 2022

Tender Value : 25.00 Lacs

Belgaum - Karnataka

Tender for repairs to roof covering, false ceiling, joinery, platering, flooring, plumbing, sanitary fittings and connected works of sf accn offrs, jcos and or at laxmi tek area and abns lines and key personnel qtrs under ge

Central Government/Public Sector

TRN :24280891 | 17 Jun, 2022

Tender Value : 0

Izatnagar - Uttar Pradesh

Tender for supply of supply, installation, testing and commissioning of electric traction capsule elevators lift with machine room for 8 persons about 544 kg. operating on 415 volts, 3 phase ac supply, speed-1mps, rise mts- ground - 1st floor -5 meters, stops-2 stops, control- ac variable voltage and variable frequency with close loop, operation one car simplex full collective operation with/without attendant, machine geared placed directly above the hoistway, car door finish stainless steel :#4 hairline panels with top and bottom cowls in ss hailine finish with 3 sides rear glass, landing door finish - stainless steel #4 hairline panels, car doors finish - vinyl tiles flooring, false ceiling- cd-35-stainless steel #4 hairline, handrail on 3 sides- stainless steel mirror finish, cab size-1100 mm wide x 1400 mm deep- inside dimensions, shaft size required-2100 mm wide x 2100 mm deep finished dimension, entrance type -centre opening doors, entrance opening clear opening 800 mm x 2000 mm overhead -5000 mm, pit depth - 2000 mm, door operation - automatic with acvvvf, door operation and multi ray electronic door detector system, details -1. combined luminous hall button with 16 segment digital hall position indicator at all floors. 2. car operating panel with luminous 16 segment digital car position indicator combined with direction arrows, overload warning indicator. 3. battery operated- alarm bell and emergency light. 4. fireman switch at main lobby. 5. automatic rescue device as per section-i in conjunction with chapter-1, 2 and 4 of cpwd specification. general specifications of electrical works part-iii- lift and escalators 2003 conforming to is:14665 pt-i to pt-5. supply, installation, testing and commissioning of electric traction capsule elevators lift with machine room for 8 persons about 544 kg. operating on 415 volts, 3 phase ac supply, speed-1mps, rise mts- ground - 1st floor -5 meters, stops-2 stops, control-ac variable voltage and variable frequency with close loop, operation one car simplex full collective operation with/without attendant, machine geared placed directly above the hoistway, car door finish stainless steel :#4 hairline panels with top and bottom cowls in ss hailine finish with 3 sides rear glass, landing door finish - stainless steel #4 hairline panels, car doors finish - vinyl tiles flooring, false ceiling- cd-35-stainless steel #4 hairline, handrail on 3 sides- stainless steel mirror finish, cab size-1100 mm wide x 1400 mm deep- inside dimensions, shaft size required-2100 mm wide x 2100 mm deep finished dimension, entrance type -centre opening doors, entrance opening clear opening 800 mm x 2000 mm overhead -5000 mm, pit depth -2000 mm, door operation - automatic with acvvvf, door operation and multi ray electronic door detector system, details -1. combined luminous hall button with 16 segment digital hall position indicator at all floors. 2. car operating panel with luminous 16 segment digital car position indicator combined with direction arrows, overload warning indicator. 3. battery operated- alarm bell and emergency light. 4. fireman switch at main lobby. 5. automatic rescue device as per section-i in conjunction with chapter-1, 2 and 4 of cpwd specification. general specifications of electrical works part-iii- lift and escalators 2003 conforming to is:14665 pt-i to pt-5

corporations/Associations/Others

TRN :24265845 | 30 May, 2022

Tender Value : 2.40 Lacs

Sagar - Madhya Pradesh

Tender for false calling and flooring work in parishad hall nagar palika parishad khurai

Central Government/Public Sector

TRN :24214599 | 27 May, 2022

Tender Value : 25.00 Lacs

Belgaum - Karnataka

Tender for repairs to roof covering, false ceiling, joinery, platering, flooring, plumbing, sanitary fittings and connected works of sf accn offrs, jcos and or at laxmi tek area and abns lines and key personnel qtrs under ge

Central Government/Public Sector

TRN :24217503 | 26 May, 2022

Tender Value : 35.00 Lacs

Balasore - Orissa

Tender for repair to flooring, tiling, antitermite treatment, sunken floors, water proofing treatment to wall and ceiling, galvanium sheets, joinery, false ceiling etc

Related Searched Keywords : false flooring

List of latest False-Flooring Tenders in Indian Tenders. Click on any False-Flooring Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for False-Flooring Tenders.

Tender for replacing existing false flooring in 4m tdacs server room and tvac and ccf lab 1st floor main building at ursc campus vimanapura

Tender for miscellaneous internal refurbishing work of aluminium framing, particle board, glaze paneling, false ceiling and false flooring etc. including repair of door window at various office building, btg control rooms and other plc control rooms.

Tender for repairs to roof covering, false ceiling, joinery, platering, flooring, plumbing, sanitary fittings and connected works of sf accn offrs, jcos and or at laxmi tek area and abns lines and key personnel qtrs under ge

Tender for false calling and flooring work in parishad hall nagar palika parishad khurai

Tender for repairs to roof covering, false ceiling, joinery, platering, flooring, plumbing, sanitary fittings and connected works of sf accn offrs, jcos and or at laxmi tek area and abns lines and key personnel qtrs under ge

Tender for repair to flooring, tiling, antitermite treatment, sunken floors, water proofing treatment to wall and ceiling, galvanium sheets, joinery, false ceiling etc

Get false flooring Tender Alert...

Related Searched Keywords : false flooring

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us