Filters

List of application form Tenders

List of latest application form Tenders in Indian Tenders. Click on any application form Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for application form Tenders.

All-Tenders (8)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :36337257 | 02 Feb, 2026

Tender Value : 0

Bangalore - Karnataka

Tender for gem bids for printed, boeing, the 737 max crisis and aviation safety theperils of profit-driven engineering, aircraftcommunications and navigation systems, high-liftaerodynamics, aircraft digital electronic andcomputer systems, aviation safety and securityutilizing technology to prevent aircraft fatality, defence offsets and the global arms tradeexplaining cross-national variations, drones andglobal order implications of remote warfare forinternational society, flapping wing vehiclesnumerical and experimental approach, formationtracking control for heterogeneous swarmsystems, history and development of airline cabinsafety, human factors on the flight deck apractical guide for design, modelling andevaluation, international cooperation in theaerospace industry economics, politics, organization, and management of technology, master airline pilot applying human factors toreach peak performance and operational resilience, multi-uav planning and task allocation, intelligent analytics for industry 4.0 applications, applied ecm vol 1 and 2 1980 1985, effectiveapplication of software failure modes effectsanalysis and software fmea toolkit bundle 2ndedition, metallic materials properties developmentand standardization mmpds handbook 2025 volume iand ii, a na kru avara samagra katha sankalanakannada edition, samasta nataka hsv kannadaedition, geometric dimensioning and tolerancingapplications analysis gauging and measurement perasme y14 5 2018, aseem anand ki aur hindi edn ofhappiness unlimited hindi edition, hindi saahitya kaitihaas hindi edition

State Government

TRN :36340611 | 23 Jan, 2026

Tender Value : 0

Trivandrum - Kerala

Tender for gem bids for sleeves for dvt pump q3 pac only * * % % 2 32 3 /mse relaxation for years of experienceand turnoveryes | complete& % & % * * % % 2 2 / startup relaxation for years ofexperience and turnoveryes | complete 6 6 & & /document requiredfrom selleroem authorization certificate, additional doc 1 requestedin atcin case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer8 8 : : ; ; < < & : & : : : < < ? ?? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?yes documents submitted as part of a clarification orrepresentation during the tender/bid process will also bedisplayed to other participated bidders after log in & & c c d d / minimum number ofbids required to disable automatic bidextension1 d /bid number: gem/2026/b/7093117< /dated: 13-01-2026 & & / bid document1 / 12 < :< : d d, , n n -- / / number of days for which bidwould be auto--extended3 8 8 < < < < / /number of auto extension count3 q %q % <6 <6 < < /bid to ra enabledno 2 2 /type of bidsingle packet bid2 2 t t /primary product categorysleeves for dvt pump u u & w & w /time allowed for technicalclarifications during technical evaluation2 days x x c c y y x x 2 2 / % % : : ; ; /inspection required byempanelled inspection authority / agenciespre-registered with gemno u u y y /evaluation methodtotal value wise evaluation & & /arbitration clauseno /mediation clauseno //bid details /emd detail c /requiredno /epbg detail ? /advisory bankstate bank of india 2 %/epbg percentage%3.00 c /duration of epbgrequired months.2a. , , ^ x < / emd & performance securityshould bein favour of beneficiary, wherever it is applicable. ^ ^ /beneficiary : director, sctimstthiruvananthapuram, department of science and technology dst, sree chitra tirunal institute for medicalsciences and technology sctimst, ministry of science and technologydirector, sctimstuin number nctgc2415p2 / 12 < / bid splitting not applied. / mii purchase preference / mii purchase preferenceyes < 6 2, < u l1+x% / purchasepreference to mii sellers availabele upto pricewithin l1+x%20 < 2 2 / maximum percentage of bidquantity for mii purchase preference50 % - - < 2 2017 8 1/8 2 & % % < 16.09.2020 - / allowparticipation only from class 1/class 2 localsuppliers as per the publicprocurementpreference to make-in-india order2017 date 16.09.2020as amended andapplicable time to timeno, got exemption from competent authority as defined indepartment of expenditure om no. f.12/17/2019-ppd dated29.10.2020, since the procurement is of spares parts of theequipment / plant & machinery etc. on nomination basisfrom original equipment manufacturer oem/ originalequipment supplier oes or original part manufactureropm /mse purchase preference /mse purchase preferenceyes c e % 2, < u l1+x% /purchase preference to mse oems available uptoprice within l1+x%15 c e 2 2 / maximumpercentage of bid quantity for mse purchasepreference25 & & x x 2 2 :/details of the competent authority approvalfor paccompetent authority approval document for pac : view document x 2 /name of competentauthoritydr ashalatha r x 2 /designation of competentauthorityprofessor x 2 % / /2 /o ce /department / division of competent authorityneurology department d /ca approval numbernil3 / 12 x 2 /competent authorityapproval date2025-12-17 00:00:00 x 2 ; 2 & nx3 /brief description of the approval grantedby competent authoritysince the intended item is a proprietary product of kendalscd sleeve, it is recommended that procurement beinitiated under the proprietary article certificate pactender mode on the gem portal.1. if the bidder is a micro or small enterprise as per latest orders issued by ministry of msme, the bidder shall berelaxed from the eligibility criteria of experience criteria as defined above subject to meeting of quality andtechnical specifications. the bidder seeking relaxation from experience criteria, shall upload the supportingdocuments to prove his eligibility for relaxation.2. if the bidder is a micro or small enterprise mse as per latest orders issued by ministry of msme, the biddershall be relaxed from the eligibility criteria of bidder turnover as defined above subject to meeting of qualityand technical specifications. if the bidder itself is mse oem of the offered products, it would be relaxed from theoem average turnover criteria also subject to meeting of quality and technical specifications. the bidderseeking relaxation from turnover, shall upload the supporting documents to prove his eligibility for relaxation.3. if the bidder is a dpiit registered startup, the bidder shall be relaxed from the the eligibility criteria ofexperience criteria as defined above subject to their meeting of quality and technical specifications. the bidderseeking relaxation from experience criteria, shall upload the supporting documents to prove his eligibility forrelaxation.4. if the bidder is a dpiit registered startup, the bidder shall be relaxed from the the eligibility criteria of bidderturnover as defined above subject to their meeting of quality and technical specifications. if the bidder is dpiitregistered oem of the offered products, it would be relaxed from the oem average turnover criteria alsosubject to meeting of quality and technical specifications. the bidder seeking relaxation from turnover shallupload the supporting documents to prove his eligibility for relaxation. 5. preference to make in india products for bids > 200 crore can also be used in bids < 200 crore but onlyafter exemption by competent authority as defined in deptt of expenditure om dated 28.5.2020: preferenceshall be given to class 1 local supplier as defined in public procurement preference to make in india, order2017 as amended from time to time and its subsequent orders/notifications issued by concerned nodal ministryfor specific goods/products. the minimum local content to qualify as a class 1 local supplier is denoted in the biddocument. if the bidder wants to avail the purchase preference, the bidder must upload a certificate from theoem regarding the percentage of the local content and the details of locations at which the local value addition ismade along with their bid, failing which no purchase preference shall be granted. in case the bid value is morethan rs 10 crore, the declaration relating to percentage of local content shall be certified by the statutory auditoror cost auditor, if the oem is a company and by a practicing cost accountant or a chartered accountant for oemsother than companies as per the public procurement preference to make-in -india order 2017 dated 04.06.2020.the buyers are advised to refer the om no.f.1/4/2021-ppd dated 18.05.2023.om no.1 4 2021 ppd dated 18.05.2023 for compliance of concurrent application of public procurement policyfor micro and small enterprises order, 2012 and public procurement preference to make in india order, 2017. 6. purchase preference will be given to mses having valid udyam registration and whose credentials arevalidated online through udyam registration portal as defined in public procurement policy for micro and smallenterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises andits subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail themselves of thepurchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders areexcluded from the purview of public procurement policy for micro and small enterprises and hence resellersoffering products manufactured by some other oem are not eligible for any purchase preference. in respect of bidfor services, the bidder must be the service provider of the offered service. relevant documentary evidence inthis regard shall be uploaded along with the bid in respect of the offered product or service and buyer will decideeligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 isnot an mse and mse seller s has / have quoted price within l-1+ 15% selected by buyer of margin ofpurchase preference /price band defined in relevant policy, such mse seller shall be given opportunity to matchl-1 price and contract will be awarded for 25% selected by buyer percentage of total quantity. the buyers areadvised to refer the om no. f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 forcompliance of concurrent application of public procurement policy for micro and small enterprises order, 2012and public procurement preference to make in india order, 2017. benefits of mse will be allowed only if seller isvalidated on-line in gem profile as well as validated and approved by buyer after evaluation of documentssubmitted. sleeves for dvt pump 285 pieces under pac 6 6 1 2 & & % % % % f f % % 2 32 3 c c /minimum 50% and 20% local4 / 12 content required for qualifying as class 1 and class 2 local supplier respectivelymakekendallscdmodelkendallscd w w /technical specifications w / as per gem category speci cation /speci cation w w /specificationname c c u u /bid requirementallowed valuesgeneral featurespatient sizings //q < h q < h /consignees/reporting officer and quantity6. .6. ./s.no. //q < h q < h /consigneereporting/officer /address /quantity< < < < /deliverydays1shiju v s695011, sree chitra tirunalinstitute for medical scienceand technology, medicalcollege po, trivandrum285365sleeves for dvt pump 120 pieces under pac 6 6 1 2 & & % % % % f f % % 2 32 3 c c /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectivelymakekendallscdmodelkendallscd w w /technical specifications* w / as per gem category speci cation /speci cation w w /specificationname c c u u /bid requirementallowed valuesgeneral featurespatient sizingm //q < h q < h /consignees/reporting officer and quantity5 / 12 . .6. ./s.no. //q < h q < h /consigneereporting/officer /address /quantity< < < < /deliverydays1shiju v s695011, sree chitra tirunalinstitute for medical scienceand technology, medicalcollege po, trivandrum120365special terms and conditions-version:2 effective from 12-01-2024 for category sleeves for dvtpump1. 1. all provisions of drugs and cosmetics act, 1940 and rules including medical device rule 2017made there under as amended till date will always be applicable. this will include all notificationsissued by central drugs standard control organization cdsco, ministry of health & family welfaremohfw and department of pharmaceuticals dop, ministry of chemicals & fertilizers time to timein this regard.2. the sellers are registered on gem based on self-declaration of valid drug license, productcertification, test reports etc if applicable. however, buyers must check and validate the details attheir end for all applicable licenses and certifications e.g., validity and authenticity/genuineness ofdrug license, product certification, manufacturer certification/licenses, test reports etc if applicable.3. the price offered by the seller/bidder shall not, in any case exceed the dpco/nppa controlled priceor price fixed by state government, if any. the seller must reduce the prices if there is anyreduction in dpco/nppa ceiling price or price fixed by state government, if any.4. any other terms and conditions which is not included or at variance with the conditions specified instc/gtc, may be added by the buyer through additional terms and conditions atc in the bid toensure items are procured from authentic/validated source with appropriate and applicable quality.the above terms and conditions are in reverse order of precedence i.e. atc shall supersede specificstc which shall supersede general terms and conditions gtc, whenever there are any conflictingprovisions.6 6 ; ; j j/buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period theadditional time shall commence from the last date of extended delivery period. the additional deliverytime shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the originaldelivery period while exercising the option clause. bidders must comply with these terms.2. certificatesbidders offer is liable to be rejected if they dont upload any of the certificates / documents sought in thebid document, atc and corrigendum if any.3. genericbidders are advised to check applicable gst on their own before quoting. buyer will not take anyresponsibility in this regards. gst reimbursement will be as per actuals or as per applicable rateswhichever is lower, subject to the maximum of quoted gst %.4. rate contract6 / 12 bidders offer is liable to be rejected if they dont upload any of the certificates / documents sought in thebid document, atc and corrigendum if any.5. generic1. the seller shall not assign the contract in whole or part without obtaining the prior written consent ofbuyer.2. the seller shall not sub-contract the contract in whole or part to any entity without obtaining the priorwritten consent of buyer.3. the seller shall, notwithstanding the consent and assignment/sub-contract, remain jointly and severallyliable and responsible to buyer together with the assignee/ sub-contractor, for and in respect of the dueperformance of the contract and the sellers obligations there under.6. genericwithout prejudice to buyer s right to price adjustment by way of discount or any other right or remedyavailable to buyer, buyer may terminate the contract or any part thereof by a written notice to the seller, if:i the seller fails to comply with any material term of the contract.ii the seller informs buyer of its inability to deliver the materials or any part thereof within thestipulated delivery period or such inability otherwise becomes apparent.iii the seller fails to deliver the materials or any part thereof within the stipulated delivery periodand/or to replace/rectify any rejected or defective materials promptly.iv the seller becomes bankrupt or goes into liquidation.v the seller makes a general assignment for the benefit of creditors.vi a receiver is appointed for any substantial property owned by the seller.vii the seller has misrepresented to buyer, acting on which misrepresentation buyer has placed thepurchase order on the seller.7. genericwhile generating invoice in gem portal, the seller must upload scanned copy of gst invoice and thescreenshot of gst portal confirming payment of gst.8. buyer added bid specific atcbuyer added text based atc clausessl. no.terms and conditions1eligibility criteria only manufacturers, their accredited agents, or authorized distributors are eligible to participate in this tender. additionally, they must maintain a functional office within the state of kerala. documentary evidence of the functional o ce must be submitted along with the quotation. o ers submitted without thisdocumentation will be summarily rejected without further communication.2proof of authorization bidders must submit valid documentation establishing their status as a manufacturer, accredited agent, or authorized distributor along withthe technical bid. the manufacturer s name and the country of origin of the offeredmaterials must be clearly stated in the manufacturer s authorization form mfa, which must remain valid for at least one year from the date of issuance. the prescribed format for mfa is provided in buyer added bid speci c atc format a.7 / 12 bid submission restrictions if an agent submits a bid on behalf of a principal/oem, the same agent cannot submit bids for any other principal/oem in this tender. in any bid, either the indian agent or the principal/oem may participate; but not both simultaneously. a principal/oem may authorize only one agent for this tender.4regulatory compliance all provisions of the drugs and cosmetics act, 1940 and associated rules including the medical device rules, 2017, as amended to date, shall apply. this includes all relevant noti cations issued by cdsco, mohfw, and dop.4.afor imported brands quoted on behalf of foreign principals/manufacturers, a valid cdsco certificate/license must be attached.4.bfor indigenous items, a certi cate issued by the state drug controller should be submitted.5price control compliance the price quoted must not exceed the ceiling price xed under dpco/nppa or by the state government, if applicable. in case of any reduction in such ceiling prices, the seller must revise the quoted price accordingly.6quality assurance and sample evaluation the items under this contract are critical for super-specialty treatments. substandard products may compromise patient safety and institutional integrity. the institute reserves the right to request product samples at any stage of the tender or

Central Government/Public Sector

TRN :36342330 | 27 Jan, 2026

Tender Value : 2.00 Lacs

Belgaum - Karnataka

Tender for gem bids for white files legal size , white files a4 size , clothing cards , application for afpp fund , clearance certificate , interview form , family gate pass form , delcaration certificate , printed register , envelopes white , wrapping paper green colour

State Government

TRN :36325741 | 27 Jan, 2026

Tender Value : 0

Kanpur - Uttar Pradesh

Tender for gem bids for supply, standard method of biochemical analysis essential ofbiochemistry enzyme biochemistry biotechnology 2ndedition biochemistry 4th edition fundamentals ofbiochemical calculation edition environmental economicsand natural resource management environmentaleconomics modern microeconomics indian edition microeconomics theory basic principles and extensions 12thedition intermediate microeconomics theory macroeconomics theory macro economics macroeconomicstheories and policy economic development growth anddevelopment with special reference to developingeconomies basic econometrics fifth edition theory ofeconometrics public finance in theory and practice mathematical economics indian economy sinceindependence 33rd edition 2022-23 statistical methods hybrid breeding breeding of fruit crop breeding ofvegetable crop crop breeding-i kharif crop cropbreeding-ii rabi crop handbook of plant breeding andplant breeding handbook of agriculture biotechnology intellectual property rights genetics and plant breedingobjective crop improvement-i kharif crop cropimprovement-ii rabi crop handbook of plant science plant breeding principal and methods fundamentals ofgenetics principles and procedures of plant breeding marriage and family change choices and constraints indian social system violence against women baal vikaschild development child development child psychologyand development text book of human development alifespan development approach research methodologymethods andtechniques multicolor edition an introductionto theories of human development exceptional children-their psychology and education early childhood educationprogramme educating exceptional children movement bid number gem2025b6937299 dated 12-01-2026 bid document1 100 0 0 and learning in early year, getting it right in the early yearsfoundation stage a review of the evidence, selection ofhousehold equipment, housing and space management, management in family living, time- saver standard forinterior design and space planning, complete designthinking guide for successful professionals, mechanics ofthe household a cause of study devoted to domesticmachinery and household mechanical appliances, theinterior design reference and specification book updatedand revised, entrepreneur start up handbookmanufacturing of profitability household fmcg product withprocess and formulation, fitting and fixture, period housefixture and fitting and fitting, dolls house accessories fitting1300-1900, the fixture and fitting of period house 1714-1939, fixture and fitting, sanitary fitting and plumbing, nta ugc home science, cbsc ugc home science specificseries, ugc net home science, ugc net ii and iii paperhome science, the emerging consumer, marketingmanagement, consumer behavior in fashion, golabalmarketing management, consumer behavior, consumerbehavior in india context, brand practices, customersrelationship management concept and cases, consumerbehavior building marking strategy, consumer behaviorinsight from indian marketing, family resourcemanagement and interior decoration, tests of householdelectrical appliances, domestic electrical appliances, atext of agriculture entomology, the principles of agricultureentomology, agriculture insect pests and their control, aglimpse on terminology of agriculture entomology, a textbook of agriculture entomology, the review of appliedentomology, greenhouse pest management, illustrateddictionary of entomology, entomology and pestmanagement sixth edition, honey bee colony healthchallenges and solutions, elements of entomology, pests ofstored grains and their management, pest management inhorticulture crops, the pests in tropical forestry iind edition, the insects beneficial and harmful aspects, text book ofsericulture apiculture entomology, a guide on descriptiveentomology, entomology at a glance, the insect structureand function and biodiversity, biological control of insectpest and weed, understanding entomology, hymenopteraand biological pest control, outlines of entomology, fundamentals of entomology as per 5th deanrecommendations, integrated pest management ofhorticultural crops a colour handbook, advances inmicrobial food safety, annual review of nutrition, breadmaking improving quality, chilled food a comprehensiveguide, food and nutritional science with objective questionand answers, food microbiology, handbook of multi choicequestions mcqs in dairy and food microbiology for icar-jrfsrf ars net gate and other competitive examination, multiple choice questions in home science for competitiveexaminations, objective food technology jrf srf ars net, test book of entomology, a hand book of agriculturalstatistics, animal husbandry and dairy science, principlesof horticulture and fruit growing, a competiteve book ofagriculture, principles of agricultural engineering vo i, farm power machine, dietetics, nutrition, entomologyrefresher, atomic habbits, start with why, rich dad poordad, the poor of habbit, think and grow rich, chunautiyamujhe pasand hai, textiles fibre to fabric, textile science, modern textiles, introductory textile science, textilesscience, principles of textile testing, textile testing, garment technology for fashion designers, managing //bid details2 / 100 quality in apparel industry, an introduction to qualityassurance for the retailers, apparel manufacturing, creative clothing construction, the art of fashion draping, modeling on the dress stand, dress fitting, patternmakingfor fashion design, watson s advanced textile design-compound woven structures, woven fabric design andproduct planning, illustrated guide for textile, weavingmachines mechanism and management, basics of textilechemical processing, handbook of textile dyeing andprinting, chemical processing of textiles preparatoryprocesses and dyeing, grammar of textile design, textilefinishing, text book of fabric science fundamentals tofinishing, chemistry to textile axillaries, technology ofprinting technology of textile processing, technology ofdyeing, technology of bleaching and mercerizing, thethames and hudson manuak of textile printing, computercolour analysis textile application, a handbook of textiles, decorative design history in indian textile and costumes, history of costumes from the ancient egyptian to thetwentieth century, know your fashion accessories, acomplete guide to english costume design and history-costume1066-1990 s, fashion accessories the complete20th century source book, fashion design manual, ecotextiles the way forward for sustainable development intextiles, handbook of sustainable textile production, handbook of textile and industrial dyeing, advancedcharacterization and testing of textiles, the impact andprospects of green chemistry for textile technology, apractical guide to textile testing, a practical guide totextile testing, computer colour analysis textileapplications, total colour management in textiles

Central Government/Public Sector

TRN :36321722 | 28 Jan, 2026

Tender Value : 0

Balaghat - Madhya Pradesh

Tender for gem bids for nitric acid v3 conforming to is 264 in liter q3 . . % % 4 4 /mse relaxation for years ofexperience and turnoverno& % & % . . % % 4 4 /startup relaxation for years ofexperience and turnoverno 5 5 & & /document requiredfrom sellercertificate requested in atcin case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer7 7 9 9 : : ; ; & 9 & 9 < < 9 9 ; ; > >? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?yes documents submitted as part of a clarification orrepresentation during the tender/bid process will also bedisplayed to other participated bidders after log in & & b b c c / minimum number ofbids required to disable automatic bidextension3; 9; 9 c c, , f f -- / / number of days for which bidwould be auto--extended7 c /bid number: gem/2026/b/7082325; /dated: 07-01-2026 & & / bid document1 / 11 7 < 7 < ; ; ; ; / /number of auto extension count1 p %p % ;5 ;5 ; ; /bid to ra enabledno 4 4 /type of bidtwo packet bid q q & s & s /time allowed for technicalclarifications during technical evaluation2 days t t b b u u t t 4 4 / % % < 9 < 9 : : /inspection required byempanelled inspection authority / agenciespre-registered with gemno q q u u /evaluation methodtotal value wise evaluation x & x & /arbitration clauseno /mediation clauseno //bid details /emd detail b /requiredno /epbg detail b /requiredno ; / bid splitting not applied. / mii purchase preference / mii purchase preferenceyes ; 5 < 4, ; q l1+x% < / purchasepreference to mii sellers availabele upto pricewithin l1+x%20 ; < 4 4 / maximum percentage of bidquantity for mii purchase preference502 / 11 % - - ; 4 2017 7 1/7 2 & % % ; 16.09.2020 - / allowparticipation only from class 1/class 2 localsuppliers as per the publicprocurementpreference to make-in-india order2017 date 16.09.2020as amended andapplicable time to timeyes, in compliance with the mii order : dpiit orderasamended and applicable time to time /mse purchase preference /mse purchase preferenceyes a % <4, ; q l1+x% < /purchase preference to mse oems available uptoprice within l1+x%15 a < 4 4 / maximumpercentage of bid quantity for mse purchasepreference251. preference to make in india products for bids < 200 crore:preference shall be given to class 1 local supplieras defined in public procurement preference to make in india, order 2017 as amended from time to time and itssubsequent orders/notifications issued by concerned nodal ministry for specific goods/products. the minimumlocal content to qualify as a class 1 local supplier is denoted in the bid document. if the bidder wants to avail thepurchase preference, the bidder must upload a certificate from the oem regarding the percentage of the localcontent and the details of locations at which the local value addition is made along with their bid, failing whichno purchase preference shall be granted. in case the bid value is more than rs 10 crore, the declaration relatingto percentage of local content shall be certified by the statutory auditor or cost auditor, if the oem is a companyand by a practicing cost accountant or a chartered accountant for oems other than companies as per the publicprocurement preference to make-in -india order 2017 dated 04.06.2020. only class-i and class-ii local suppliersas per mii order dated 4.6.2020 will be eligible to bid. non - local suppliers as per mii order dated 04.06.2020 arenot eligible to participate. however, eligible micro and small enterprises will be allowed to participate .thebuyers are advised to refer the om no.f.1/4/2021-ppd dated 18.05.2023.om no.1 4 2021 ppd dated 18.05.2023 for compliance of concurrent application of public procurement policyfor micro and small enterprises order, 2012 and public procurement preference to make in india order, 2017. 2. purchase preference will be given to mses having valid udyam registration and whose credentials arevalidated online through udyam registration portal as defined in public procurement policy for micro and smallenterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises andits subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail themselves of thepurchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders areexcluded from the purview of public procurement policy for micro and small enterprises and hence resellersoffering products manufactured by some other oem are not eligible for any purchase preference. in respect of bidfor services, the bidder must be the service provider of the offered service. relevant documentary evidence inthis regard shall be uploaded along with the bid in respect of the offered product or service and buyer will decideeligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 isnot an mse and mse seller s has / have quoted price within l-1+ 15% selected by buyer of margin ofpurchase preference /price band defined in relevant policy, such mse seller shall be given opportunity to matchl-1 price and contract will be awarded for 25% selected by buyer percentage of total quantity. the buyers areadvised to refer the om no. f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 forcompliance of concurrent application of public procurement policy for micro and small enterprises order, 2012and public procurement preference to make in india order, 2017. benefits of mse will be allowed only if seller isvalidated on-line in gem profile as well as validated and approved by buyer after evaluation of documents3 / 11 submitted. nitric acid v3 conforming to is 264 in liter 10714 containers 5 5 1 2 & & % % % % b b < < % % 4 c4 c b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively s s /technical specifications s / as per gem category speci cation /speci cation s s /specificationname b b q q /bid requirementallowed valuesgenericgradetechnical techrequirements for nitricacidas per table 1, clauses 4.2 of is 264packing size50 l //p ; e p ; e /consignees/reporting officer and quantity5. .5. ./s.no. //p ; e p ; e /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1naresh kumar481116, malanjkhand copperproject, dist- balaghat, madhyapradesh- 481116107141205 5 : : g g/buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period theadditional time shall commence from the last date of extended delivery period. the additional deliverytime shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the originaldelivery period while exercising the option clause. bidders must comply with these terms.2. scope of supplyscope of supply bid price to include all cost components : only supply of goods3. buyer added bid specific atc4 / 11 buyer added text based atc clauses sl.no.materialcodedescription of material with specification/ part no./make, etcunitquantityship to location1071700037nitric acid commercial grade, 62% approximatelylitre10714mcp stores - spares & consumables a pre-qualification criteria: i. only manufacturers /authorised dealers /distributors /stockists of commercialgrade nitric acid/acids need to submit offer. documentory proof is to be submitted along with the tender. ii. average annual financial turnover during the last 3 years, ending 31st march2025, should be at least rs. 1, 36, 604/-. documents to be submitted ca certified turnover statement carrying udin number. iii. experience of having successfully completed work order of supply of nitric acid during last 7 years ending last day of month previous to the one in which applications are invited should be either of the following: - submit documentory proof in the form of purchase order with invoice copy/ gem crac copy.a three completed work order of supply of nitric acid of basic value not less than the amount equal to rs. 1, 82, 138/- each. orb two completed work order of supply of nitric acid of basic value not less than the amount equal to rs. 2, 27, 673/- each. orc one completed work order of supply of nitric acid of basic value not less than the amount equal to rs. 3, 64, 276/-. for arriving at cost of similar work, the value of work executed shall be brought to current costing level by enhancing the actual value of work at simple rate of 7% seven percent per annum, calculated from the date of completion to the date of bid opening . b special terms and conditions: 1. material supplied must be as per the speci cation. nitric acid, commercial grade, 62% approximately. 2. delivery period: - party has to supply the material as part quantity in two phases. first supply of 5000 litre within one month after placement of order second lot after three months.5 / 11 3. material should be supply in corbox packing, approx weight 50 liter to 75 liter can each. 4. bidder to note that buyer added bid speci c terms and conditions atc shall supersede any other t&c of bid document. 5. it is being construed that all t&c of bid document are acceptable to the bidder upon submission of bid.bidder shall upload certification for the same on their letter head along with the offer. in absence of the certification, hcl reserves the right to reject the offer.6. bidders to ensure that qualifying documents indicated for all the pre-quali cation criteria are submitted along with the o er. however, hcl reserves the right to seek historical shortfall documents, which existed on or before the tender opening date. the shortfall information/documents should be sought only in case of historical documents that pre-existed on the last date of bid submission, and which have not undergone change since then. any historical/pre-existed document as on or before the last date of bid submission can be treated as shortfall documents for meeting the pre-quali cation criteria and other terms & conditions of the nit.7. techno-commercial o er should be prepared by bidder on their company letter head, which complies/contains all the technical speci cations & commercial conditions mention in our nit and buyer added bid specific terms and conditions.8. prices on gem are inclusive of all cost components i.e. gst, freight, p&f, insurance etc. any other condition mentioned anywhere in the attachment shall be ignored.9. hcl reserves the right to reject any or all tenders entirely at their sole discretion without assigning any reason there of and also reserves the right to place order in part or full on different suppliers.10.bidder to indicate the item wise gst percentage 5% or 12% or 18% or 28% in their part-i techno-commercial offer which is inclusive in the total quoted price. 11.bidder to indicate the item wise hsn number in their part-i techno commercial offer. c security deposit:supplier shall on receipt of loi/purchase order, deposit a sum equivalent to 5% five percent of the work order value including gst towards the security deposit sd with hcl-mcp positively within 30 days from the receipt of letter of intent/ work order in the form of insurance security bond/ /neft/rtgs/fixed deposit receipt/bank guarantee on hcl s format from a scheduled commercial bank except co-operative and gramin. only after submission of sd, the emd of successful bidder will be refunded. payment of supplier will be withheld until receipt of security deposit. in case the security deposit is furnished by way of bank guarantee, it must be initially valid for the entire

corporations/Associations/Others

TRN :36314114 | 21 Jan, 2026

Tender Value : 0

South 24 Parganas - West Bengal

Tender for printing and supply of house connection application forms within rajpur- sonarpur municipality.

Central Government/Public Sector

TRN :36256023 | 27 Jan, 2026

Tender Value : 0

Visakhapatnam - Andhra Pradesh

Tender for gem bids for astronomical timer for street light control timer controlsas per is 9000 q3 . . % % 4 4 /mse relaxation for years ofexperience and turnoverno& % & % . . % % 4 4 /startup relaxation for years ofexperience and turnoverno 5 5 & & /document requiredfrom sellercertificate requested in atc, oem authorizationcertificate, additional doc 1 requested in atcin case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer7 7 9 9 : : ; ; & 9 & 9 < < 9 9 ; ; > >? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?no & & b b c c / minimum number ofbids required to disable automatic bidextension5; 9; 9 c c, , f f -- / / number of days for which bidwould be auto--extended7 c /bid number: gem/2026/b/7063786; /dated: 02-01-2026 & & / bid document1 / 17 7 < 7 < ; ; ; ; / /number of auto extension count1 o %o % ;5 ;5 ; ; /bid to ra enabledno 4 4 /type of bidsingle packet bid p p & r & r /time allowed for technicalclarifications during technical evaluation2 days s s b b t t s s 4 4 / % % < 9 < 9 : : /inspection required byempanelled inspection authority / agenciespre-registered with gemno p p t t /evaluation methodtotal value wise evaluation w & w & /arbitration clauseno /mediation clauseno //bid details /emd detail b /requiredno /epbg detail b /requiredno ; / bid splitting not applied. / mii purchase preference / mii purchase preferenceyes ; 5 < 4, ; p l1+x% < / purchasepreference to mii sellers availabele upto pricewithin l1+x%20 ; < 4 4 / maximum percentage of bidquantity for mii purchase preference50 /mse purchase preference /mse purchase preferenceyes2 / 17 \ ^ % <4, ; p l1+x% < /purchase preference to mse oems available uptoprice within l1+x%15 \ ^ < 4 4 / maximumpercentage of bid quantity for mse purchasepreference701. preference to make in india products for bids < 200 crore:preference shall be given to class 1 local supplieras defined in public procurement preference to make in india, order 2017 as amended from time to time and itssubsequent orders/notifications issued by concerned nodal ministry for specific goods/products. the minimumlocal content to qualify as a class 1 local supplier is denoted in the bid document. if the bidder wants to avail thepurchase preference, the bidder must upload a certificate from the oem regarding the percentage of the localcontent and the details of locations at which the local value addition is made along with their bid, failing whichno purchase preference shall be granted. in case the bid value is more than rs 10 crore, the declaration relatingto percentage of local content shall be certified by the statutory auditor or cost auditor, if the oem is a companyand by a practicing cost accountant or a chartered accountant for oems other than companies as per the publicprocurement preference to make-in -india order 2017 dated 04.06.2020. only class-i and class-ii local suppliersas per mii order dated 4.6.2020 will be eligible to bid. non - local suppliers as per mii order dated 04.06.2020 arenot eligible to participate. however, eligible micro and small enterprises will be allowed to participate.the buyersare advised to refer the om no.f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 forcompliance of concurrent application of public procurement policy for micro and small enterprises order, 2012and public procurement preference to make in india order, 2017. 2. purchase preference will be given to mses having valid udyam registration and whose credentials arevalidated online through udyam registration portal as defined in public procurement policy for micro and smallenterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises andits subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail themselves of thepurchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders areexcluded from the purview of public procurement policy for micro and small enterprises and hence resellersoffering products manufactured by some other oem are not eligible for any purchase preference. in respect of bidfor services, the bidder must be the service provider of the offered service. relevant documentary evidence inthis regard shall be uploaded along with the bid in respect of the offered product or service and buyer will decideeligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 isnot an mse and mse seller s has / have quoted price within l-1+ 15% selected by buyer of margin ofpurchase preference /price band defined in relevant policy, such mse seller shall be given opportunity to matchl-1 price and contract will be awarded for 70% selected by buyer percentage of total quantity. the buyers areadvised to refer the om no. f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 forcompliance of concurrent application of public procurement policy for micro and small enterprises order, 2012and public procurement preference to make in india order, 2017. benefits of mse will be allowed only if seller isvalidated on-line in gem profile as well as validated and approved by buyer after evaluation of documentssubmitted. astronomical timer for street light control timer controls as per is 9000 30pieces 5 5 1 2 & & % % % % < < % % 4 `4 ` b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively r r /technical specifications r / as per gem category speci cation3 / 17 /speci cation r r /specificationname b b p p /bid requirementallowed valuesconstructionalno. of phasesinglepower rating/indicativecurrent rating for relay on230 v basis and 0.6 pf1 phase, 16 amperesystem rated voltage +/-10%230 volt, 50 hzgenericnetwork/communicationsupport through gprs andwith gpsnodisplay of energy in kwh andmeasurement of energy inkwh non utility withresolution 1%yes, nowarrantywarranty in years1 //o ; b o ; b /consignees/reporting officer and quantity5. .5. ./s.no. //o ; b o ; b /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1adisekhar munga530031, central storesbuilding visakhapatnamsteel plant301505 5 : : e e/buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period theadditional time shall commence from the last date of extended delivery period. the additional deliverytime shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the originaldelivery period while exercising the option clause. bidders must comply with these terms.2. scope of supplyscope of supply bid price to include all cost components : only supply of goods3. buyer added bid specific atc4 / 17 buyer added text based atc clauses atc additional terms & conditionscontact details: please use email id: ashak@vizagsteel.com for any communication regarding this bid. offers from bidders who are under hold in material sub grp 26023 or centrally blocked with vsp will be rejected.bidders are requested to read the bid document carefully before submission of the bid.note:a. bidder to specify make/model and upload technical catalogue/brochures etc wherever applicable in the offer. supply of other than offered make/model will be summarily rejected.b. rinl will not take into cognizance any contradiction w.r.t the offer given by bidder or agreed to duringtechnical evaluation, vis- -vis contents of catalogue/ documents made available by the bidder elsewherein the gem portal outside the bid/tender under consideration. bidder will be required to abide by their offer/ terms agreed to during the technical evaluation. c. inspection & acceptance of goods shall be as per the offer and agreed parameters during technical clarifications/evaluation.d. signed copies of format for undertaking at annexure-1, format non-collusive tendering certificate at annexure-2 and bid security declaration with supporting document as per format mentioned at annexure-4 are mandatory to submit with the tender 1. general :1.1 the tender shall be governed by the general conditions of contract for supply gcc and detailed terms and conditions of invitation to supply tender, which is available on vsp`s website, which can be freely accessed and downloaded.1.2 tenders shall be treated as if the gcc, detailed terms and conditions of invitation to supply tender and bid atc has been accepted in toto by the tenderer unless deviations, if any, are specified in the offer. 1.3 exception and deviation: no request for change in scope of work will be considered.1.4 tenderers/bidders shall be required to submit an undertaking regarding authenticity of documents submitted in the format attached at annexure-1. the bidder/ tenderer shall sign all the pages of his/her submission w.r.t to subject tender.1.5 bidder shall submit a declaration / non-collusive tendering certificate as per the format at annexure-2 whether : a. the proprietor/ partner/ director of the firm/ company has any relationship within the meaning of section 6 of the companies act 2013 with any of the employee working in the plants / units concerned or director of rinl including its subsidiaries and if so, give the details. b. the person or team representing the firm is also representing any other firm participating against the tender and if so, give the details thereon. non-disclosure/ incorrect disclosure of the above details factuallyby a firm either on its own while submitting its offer or upon enquiry at the option of rinl during the scrutiny of its offer may invite penal action against the firm, which may include rejection of the offer, suspensionof business dealings or both.1.6 the oms / orders issued by government of india and any subsequent modifications / amendments thereto, relating to: a public procurement preference to make in india order 2017 b restrictions imposed on issuance of gtes and c requirement of registration of bidders with competent authority, such as in case of bidders from countries sharing land border with india etc., shall be adhered to by the tenderers.documents required:a. submit duly signed and stamped technical specification document confirming acceptance failing which your offer will be rejected.b. submit duly signed and stamped bid document on all pages, confirming acceptance.c. if a dealer/distributor/channel partner etc. is quoting on behalf of a manufacturer, authorization certificate from the principal firm has to be submitted along with the offer. d. documents for claiming mse benefits, in case of mses, as per terms and conditions of this bid.e. documents for claiming mii benefits.f. signed copies of format for undertaking at annexure-1, format non-collusive tendering certificate atannexure-2 and bid security declaration as per format mentioned at annexure-4 2. test certificate tc applicable:tc from govt/govt approved lab or nabl accredited lab or manufacturers own lab incase of iso certified company3. inspection: inspection: by receipt inspection cell ric at vsp stores.5 / 17 .1 rinl reserves its right to inspect the stores and alter the place of inspection at its sole discretion. 1.2 generally, inspection shall be carried out at rinl / vsp stores for all items such as operational consumables etc.1.3 the supplier shall furnish the inspection call along with all the internal test reports as well as other test certificates specified in the schedule of material cum specifications at least 15 fifteen days in advanceof the scheduled delivery date, to enable vsp to examine the same and issue dispatch clearance/carry out inspection at the suppliers premises. the dispatch of stores by the suppliers shall be only after receipt of dispatch clearance or accepted inspection note/ certificate.2. packing: the contractor shall be responsible for the stores being properly packed for transport by road so as to ensure their being free from loss or damage on arrival at their destination. the contractor should comply with the standard packing conditions prescribed by the railway/transport companies/steamer/air carries.. po no, po date, supplier s name, mat. no., mat. description / item nomenclature and quantityshould be clearly mentioned on each packet. items having different mat. no. should be packed separately.there should not be mix up of different items in any packet.3. drawing approval applicable: nodrawing submission and approval : where drawings are required to be furnished for approval upon placement of po before manufacturing of item, the schedule for submission of drawings and for supply after approval are to be clearly indicated in the offer failing which a maximum of 3 three weeks from the date of po shall be considered to be the period for submission of drawings. the drawings submitted shall be approved within 15 days of receipt.4. delivery schedule: as per bid document. however, rinl-vsp reserves the right to revise the delivery schedules, depending on vsp s production requirements and storage capacity, without any change in price, terms and conditions of po. part supplies allowed.5. rinl reserves the right to negotiate with the tenderers without prejudice to their quoted price. 6. number of sources : 01 one the intended number of source is one . however, the bid quantity may be split in two sources as per mse and make in india purchase preference policy of buyer subject to l1 price matching. 7. price firmness: price shall be quoted in rs. per unit for supply on for vsp stores basis inclusive of material price, freight, transit insurance, taxes / gst, etc. and the price finalized shall remain firm till completion of supplies.8. consignee : managerstores, central stores, visakhapatnam steel plant, visakhapatnam, andhrapradesh, india 530031.9. please mention applicable gst in your offer. gst shall be applicable on all penalties like liquidated damages, penalties for variation in material specification, risk purchase recovery, shortages, penalty for late lifting/ delivery, forfeiture of emd / pg bond/ security deposit etc if levied by the purchaser on the seller/supplier and shall be recovered along with gst applicable thereon. the purchaser shall issue tax invoice in favour of the seller/supplier for such recoveries. 10. not-withstanding anything specified in this tender document, rinl at its sole discretion, unconditionally and without having to assign any reason, reserves to itself the right: a to accept or reject the lowest priced tender or any other tender or all the tenders;b to accept any tender in full or in part quantity;c to reject the offers not conforming to the tender terms andd to accord purchase preference to public sector undertakings wherever applicable as per government policy/ guidelines.e to extend purchase preference to local & non-local ssis / mses micro and small enterprises, subject to submission of documents as stipulated.11. terms of payment: 11.1 100% payment of the value of each consignment shall be made against submission of bills along with vsp s acceptance garn goods acceptance / rejection note. payment shall be released on 60th day21st day for local micro and small enterprises and 45th day for non-local mses, subject to submission of documents as stipulated for availing mse benefits from the date of acceptance of material at vsp i.e. garn date.6 / 17 a. 100% payment against commercial invoice, to be submitted to finance purchase bills section, vsp.b. copy of invoice, lr, packing list/challan, inspection certificate, test certificate to be submitted to central stores, vsp.11.2 payment shall be made by neft/rtgs mode or such other mode of electronic fund transferoffered by banks. tenderers must furnish the required bank account details to vsp in prescribed proforma so that the same can be updated in vsp s database.12. right to accept/reject offers:rinl/vsp does not pledge itself to accept the lowest priced offer or any other offer and reserves to itself the right of accepting the whole or any part of the tender/offer or portion of the quantity tendered and the tenderers bidders shall supply the same at the rate quoted.13. liquidated damages: shall be as per gem gtc clause no. 15. iii with following addition/modification: subject to a maximum of 10% of value of such consignments, excluding taxes. for levy of ld in case of late delivery, date of receipt of material by rinl-vsp stores along with necessary documents shall be considered as date of delivery, subject to acceptance of material by rinl-vsp after inspection. 14. punitive actions:14.1 if it comes to the notice of rinl at any stage from request for enlistment/ tender document that any of the certificates / documents submitted by applicants for enlistment or by bidders are found to be false/ fake/ doctored, the party will be debarred from participation in all rinl tenders for a period of 5 five years including termination of contract, if awarded. emd/ security deposit etc. if any, will be forfeited. the contracting agency in such cases shall make good to rinl any loss or damage resulting from such termination. contracts in operation anywhere in rinl will also be terminated with attendant fall outs like forfeiture ofemd/ security deposit, if any, and recovery of risk and cost charges etc. decision of rinl management willbe final and binding. 14.2 in case the commercially and technically acceptable lowest price offered tenderer backs out after tender is opened in single bid tender and in two bid tender after commercial bid / price bid is opened ; or after finalization of contract punitive actions shall be as per prevailing guidelines which include: a if any tenderer backs out after opening of the techno-commercial bids but, prior to reverse e-auction and opening of the sealed price bids, they shall be kept under hold without issue of tender enquiries for the next 1 tender or 3 months whichever is later. b if the l1 tenderer backs out after opening of the tenders in case of single bid cases or after the reverse e-auction / opening of the sealed price bids in case of 2-bid cases and within the validity period, they shall be kept under hold without issue of tender enquiries up to next one year including barring participation in open tenders. c if the tenderer backs out after award of the contract, they shall be kept under hold without issue of tender enquiries up to next one year including barring participation in open tenders, apart from proceeding with alternative procurement action re-tendering at the risk & cost of the defaulting supplier15. purchase preference to mses and make in india mii vendors and other benefits:15.1 purchase preference is accorded to public sector undertakings wherever applicable as per government policy/guidelines.15.2 purchase preference is accorded to local micro & small entrepreneurs local ssis and non-local mses as at 18.3 below, subject to submission of documents as stipulated vide clause 19.1 below. further, the tender sets shall be provided free of cost and exemption shall be given from submission of earnest money deposit emd for such mses.15.3 local and non-local micro and small enterprises mse those are technically and commercially acceptable shall be considered for extension of purchase preference, where their offer is within 15% of l-1offer and they match the l-1 offer. the quantity distribution shall be done among the l-1 tenderer and other eligible tenderers who are in the range of purchase preference and match the l-1 price, as per clause no. 20.3 herein below. mse purchase preference to eligible tenderers in the order of preference given below in the order of ranking within each preference category: a. local mses - till the total quantity on local mses equals or exceeds 50 % b. mses - till the total quantity on mses including local mses equals or exceeds 25 % c. others illustrative example for quantity distribution in case of divisible items, and where no.of sources as per nit is two is given at annexure-3 of detailed terms & conditions of invitation to supplytender under tenders > mm in rinl-vsp s website www.vizagsteel.com 15.4 where there is/are eligible local mse/s and it is not possible to split the order, 100% of the order quantity shall be placed on the lowest eligible local ssi. 15.5 quantity reserved for sc/st / women owned mses: within the 25% of the tendered quantity reserv7 / 17 ed for mses, 4% shall be reserved for mses owned by sc/sts and 3% shall be reserved for mses owned bywomen, who are eligible by being technically and commercially acceptable, quoting price in the range of purchase preference and matching the l1 price. in the absence of such agencies, the reserved quantity shall be met from other mses. 15.6 msmes vendors/bidders who are willing to utilize the treds platform for payment purpose are invited on treds portal.15.7 the above purchase preference clauses are to be read with om no.f.1/4/2021-ppd dated 18.05.2023 and subsequent amendments if any for compliance of concurrent application of public procurement policy for micro and small enterprises order, 2012 and public procurement preference to make in india order, 2017. benefits of mse will be allowed only if seller is validated as mse by buyer after evaluation of documents submitted.16. condition for availing benefit under clause 14.1 and 18.0 by mses 16.1 the mse unit shall get themselves registered with msme data bank, being operated by nsic, undersme division, m/o msme and submit the following documents for the items/item category for which they are registered for availing the relevant benefits as stipulated hereinabove.i self-certified copy of udyam registration certificate;ii the concerned mse is registered in the msme databank andiii mse is registered for the given scope of job/ procurement mses participating in the tender must submit valid certificate of registration with any one of the below agencies indicating the details of the particular tendered item/item category along with their bid. the micro and small enterprise/s not registered for the particular item/ item category for which the tender is relevant, will not be eligible for any exemption/preference. the registration certificate issued from any one of the below agencies must be valid as on tender opening date tod. the successful bidder should ensure that the same is valid till the end of the

Central Government / Public Sector

TRN :36197881 | 23 Jan, 2026

Tender Value : 0

Vijayawada - Andhra Pradesh

Tender for supply of metal paste multi purpose metal filler as per the following specifications. 1) mix ratio by volume : 1:1 2) pot life @30 degree c : 30 minute. 3) surface of application(repair) : metal. 4) mix ratio by weight : 1:1. 5) hardness shore d : 75. 6) working time : 5 minutes. 7) shelf life @ 25 degree c : 02 months or less. 8) full cure time : 12 hours or less. 9) functional cure time : 45 minutes or less. 10) packing size : 01 kg tin only. 11) putty form : liquid. 11) is standards : astm 1544, is 101. makes: esdee/loctite/jai matha/stanvac/pidilite. note: 1) supply of material in instalments only (or) as when required by the section, since metal paste shell life is 45 days. 2) one kg sample should be got approved before effecting bulk supply.

Related Searched Keywords : application form

List of application form Tenders

Tender for gem bids for white files legal size , white files a4 size , clothing cards , application for afpp fund , clearance certificate , interview form , family gate pass form , delcaration certificate , printed register , envelopes white , wrapping paper green colour

Tender for printing and supply of house connection application forms within rajpur- sonarpur municipality.

Get application form Tender Alert...

Related Searched Keywords : application form

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us