Filters

List of box-drain Tenders

List of latest box-drain Tenders in Indian Tenders. Click on any box-drain Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for box-drain Tenders.

All-Tenders (53)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35763827 | 10 Nov, 2025

Tender Value : 2.94 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at gups narayanpura - demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). random rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in :cement mortar 1:6 ( 1-cement : 6-sand).cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." stone kharanja : random rubble dry stone kharanja under floor. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work p&f rigid pvc pipe (is:4985 mark) class ii(4 kg. /cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant 110mm dia wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr

State Government

TRN :35765746 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Jaipur - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). supply & stacking good soil of earth at site complete including loading unloading & transportation etc.good soil of earth filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :columns, pillars, posts and struts etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix / design mix roviding m-25 grade concrete by using cement as per codal provision instead of m-20 grade design mix. providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

Central Government/Public Sector

TRN :35756641 | 21 Nov, 2025

Tender Value : 62.75 Lacs

Jaisalmer - Rajasthan

Tender for gem bids for local, adhesive incise drape 25 by 30cm adhesive incise drape 5by 15cm apparatus anaesthitic face mask with air cushiontransparent size 0 infant apparatus anaesthetic facemaskwith air cushion transparent size 1 paediatric apparatusanaesthetic face mask anitistatic with air cushiontransparent size 2 medium apparatus anaesthetic facemask antistatic with air cushion transparent size 3 adultwith valve apparatus anaesthetic face mask antistatic withair cushion transparent size 4 apparatus oxygen inhalationportable tubing 1 meter with connector for angiocath 15 gover the needle 4 and half inch catherer suctionendobronchial with terminal transparent non toxic pvctubing size fg 10 length 45 cm catherer suctionendobronchial with terminal transparent non toxic pvctubing size fg 12 length 50 cm catherer suctionendobronchial with terminal transparent non toxic pvctubing size fg 14 length 50 cm chest drainage system disposable gown disposable shoe cover ecg electrodesdisposable laryngoscope adult bulb for laryngoscopeinfant bulb for long iv line 15 g 100 cm long iv line 18g of 70 cm long iv line 18 g of 100 cm endotrachealtube with bronchial blocker 6 point 0 mm to 9 point 0 mm mapleson non rebreathing system bains circuit nasalcannula adult nasal cannula paediatric needle epiduralanaesthesia with luer lock fitting with styllet 15 g ss needle epidural anaesthesia with luer lock fitting with styllet18 g ss needle spinal anaesthesia with luer lock fittingwith styllet 25 g ss mask for nebulizer outfit venouspressure manometer complete paediatric anaestheticcircuit complete non-rebreathing system pressuremonitoring line 100 cm or 200cm male or female rapidinfusion set short ledercath 20g 8 to 10 cm long withintroducer needle and guide wire three way stop cock bid number gem2025b6822692 dated 31-10-2025 bid document1 134 1 1 plastic, triple lumen catherer kit cannula guide wiredilator introducer needle, tube rubber left and rightendotracheal intubation with 2 ballons and 2 pilot bags withsuction tube size large, tube endotracheal reinforced pvcsize 3 point 0 with out cuff, tube endotracheal reinforcedpvc size 3 point 5 with out cuff, tube endotrachealreinforced pvc size 4 point 0 with out cuff, tubeendotracheal armoured styllet for, tube endotrachealcatheter mount for, tube endotracheal nasal size 2 point 5without cuff, tube endotracheal nasal size 3 point 0 withoutcuff, tube endotracheal nasal size 3 point 5 without cuff, tube endotracheal nasal size 4 point 0 without cuff, tubeendotracheal nasal size 4 point 5 without cuff, tubeendotracheal nasal size 5 point 0 with cuff, tubeendotracheal nasal size 5 point 5 with cuff, tubeendotracheal nasal size 6 point 0 with cuff, tubeendotracheal nasal size 6 point 5 with cuff, tubeendotracheal nasal size 7 point 0 with cuff, tubeendotracheal nasal size 7 point 5 with cuff, tubeendotracheal nasal size 8 point 0 with cuff, tubeendotracheal oral with inflatable cuff tube and pilot bag 7point 5 mm internal diameter, tube endotrachealreinforced pvc size 7 point 5 with cuff, tube endotrachealreinforced pvc size 8 point 0 with cuff, tube tracheostomywith inflatable cuff size 35 fg, tube tracheostomy withinflatable cuff size 39 fg, laproscopic coliscytectomyprocedure drape sheet, foleys balloon catheter 2 waysilicon 16 g, foleys balloon catheter 2 way silicon 18 g, foleys balloon catheter 2 way silicon 20 g, foleys ballooncatheter silicon size 8 fr, hand gloves size 6 and half pairof, hand gloves size 7 pair of, knife bard parker blade size1 fitting commercial no 10 packet of 6, knife bard parkerblade size 1 fitting commercial no 11 packet of 6, knifebard parker blade size 1 fitting commercial no 12 packet of6, knife bard parker blade size 1 fitting commercial no 15packet of 6, knife bard parker blade size 2 fittingcommercial no 20 packet of 6, knife bard parker blade size2 fitting commercial no 22 packet of 6, knife bard parkerblade size 2 fitting commercial no 23 packet of 6, suctiondrain, syringe disposable plastic sterile 2 ml with needle, syringe disposable plastic sterile 5 ml with needle, syringedosposable plastic sterile 10 ml with needle, syringedisposable 20 ml, syringe disposable 50ml, strip indicatorsfor sterilisation control for testing sterility of drums, armband disposable tourniquet, percutaneous tracheostomy kitset complete with forceps or dilators and tracheostomy tube8 point 0 mm, clavicle brace small or medium or large, long knee brace large, long knee brace medium, kneecap elastic xl, knee cap elastic large, knee cap elasticmedium, knee cap elastic small, hinged knee brace withopen patella, flexible open patella knee brace large, flexible open patella knee brace medium, heel cup siliconor carbon copolymer, pelvic binder size m or l or s orxxl, lumbosacral belt support size s or m or l or xl orxxl, skin stapler remover, adhesive plaster zinc oxide 2point 5 cm by 1 mtr, adhesive plaster zinc oxide 7 point 5cm by 5 mtr, adhesive plaster micro porous tape 1 inch boxof 12, adhesive plaster micro porous tape 2 inches box of 6, adhesive plaster micro porous tape 3 inches box of 4, abdominal binder 10, bandage crepe 10 cm, bandagecrepe 15 cm, bandage open woven for plaster of paris10cmx5m, bandage open wove uncompressed 6 cm by 4metres, bandage open wove uncompressed 10 cm by 4metres, bandage plaster of paris 10 cm by 3 metres, //bid details2 / 134 / / 1 1 /item categorybandage plaster of paris 15 cm by 3 metres, bandage tshaped, bandage comfortable casting 7 point 5cm by 3point 6 cm, bandage comfortable casting 12 point 5cm by 3point 6 cm, bandage dvt stocking small, bandage dvtstocking medium, bandage dvt stocking large, cottonwool absorbent pkt of 500 gm, cotton wool non absorbentpkt of 500g, dressing medicated adhesive 25 cm by 6 cm ina single strip pack, dressing first aid unmedicated sterilepack, dressing medicated gauze paraffin 10 cm by 10 cmtin of 24, dressing, shell compressed, dressing woundcare occlusive and hydrocolloid dressing with flexible foampadding for optimum healing 10cm by 10cm box of 5, dressing wound care occlusive and hydrocolloid dressingwith flexible foam padding for optimum healing 20cm by20cm box of 3, dressing extra thin wound care 10cm by10cm box of 5, dressing extra thin wound care 20cm by20cm box of 3, preop adhesive drape 28 cm by 30 cm, dressing silicon gel sheet 5 inch by 4 point 5 inch, dressingwound care non adhesive 3 by 3 inches, dressing woundcare non adhesive 4 by 4 inches, dressing postopmedicated 6 by 7cm pack of 100 dressings flexigrid, dressing postop medicated 10 by 12 cm pack of 50dressings flexigrid, dressing wound 10 by 20 cm, dressingsterile 4 inch by 4 inch box of 5, dressing sterile 8 inch by 8inch box of 3, dressing collagen wound management size 2inch by 3 inch, dressing collagen wound management size8 inch by 14 inch, dressing collagen wound managementmaterial 5 ml, dressing collagen wound managementmaterial 15 ml, gauze absorbent folded 1 cm by 100metres, haemostatic gauze chitosan, pad abdominal swab25 by 25 cm with tape 30 cm, pad abdominal swab 40 by25 cm with tape 30 cm, suspensory scrotal, surgeons capsdisposable, surgeons mask disposable, haemostatic clipstitanium haemostatic clips extra large, haemostatic clipstitanium haemostatic clips large, haemostatic clipstitanium haemostatic clips medium, haemostatic clipstitanium haemostatic clips small, linear cutter reload unitblue cartidge for use with safety lock out 75mm, meshprosthesis for hernia small polypropylene mesh size 6 by 11cms composite light wt mesh of polypropylene andpolygalactin 910 polygycolic acid size 6 by 11 cms, monofilament polyglyconate synthetic absorbable suturesize 1 by 0 70 to 75 cm 1 by 2 circle taper cutting 20 to 30mm, monofilament polyglyconate synthetic absorbablesuture size 2 by 0 70 to 75 cm 1 by 2 circle taper cutting20 to 30 mm, monofilament polyglyconate syntheticabsorbable suture size 3 by 0 70 to 75 cm 1 by 2 circletaper cutting 20 to 30 mm, polyamide monofilament size 1by 0 100 cm 1 by 2 circle rb 40 mm, polyamidemonofilament size 2 by 0 70 to 80 cm 3 by 8 circle reservecutting 40 to 45 mm, polyamide monofilament size 3 by 070 to 80 cm 3 by 8 circle reverse cutting 25 to 30 mm, polyamide monofilament size 4 by 0 40 to 50 cm 3 by 8circle cutting 15 to 20 mm, polydioxanone size 1 150 cmsloop 1 by 2 circle rb needle 50 to 55 mm, polydioxanonesize 1 90 cms 1 by 2 circle needle 40 to 45 mm, polydioxanone size 1 by 0 70 to 75 cms 1 by 2 circle rb 40to 45 mm, polydioxanone size 4 by 0 70 to 75 cms 1 by 2circle rb needle 12 to 15 mm, polydioxanone size 5 by 070 to 75 cms 1 by 2 circle rb needle 12 to 15 mm, polyglicaprone size 3 by 0 70 to 75 cm 3 by 8 circle cutting20 to 25 mm, polyglicaprone size 4 by 0 70 to 75 cms 3 by8 circle reverse cutting 15 to 20 mm, polypropylene bluemonofilament 70 to 75 cm size 3 by 0 and 1 by 2 circle //bid details3 / 134 taper cut 25 mm double needle, polypropylene bluemonofilament 70 to 75 cm size 3 by 0 and 3 by 8 circlereverse cutting 12 mm, polypropylene blue monofilament70 to 75 cm size 4 by 0 and 3 by 8 circle rb, polypropyleneblue monofilament 70 to75 cm size 1 and 3 by 8 circlereverse cutting 12 mm, polypropylene blue monofilament70 to 75 cm size 1 by 0 and 3 by 8 circle reverse cutting 12mm, polypropylene blue monofilament 70 to75 cm size 4 to0 and 1 by 2 circle rb 13 mm double needle, polypropylene blue monofilament 70 to 75 cm size 4 by 0and 3 by 8 rb 12 mm, polypropylene blue monofilament 70to 75 cm size 5 point 0 3 by 8 rb 24 mm, polypropyleneblue monofilament 70 to 75 cm size 6 point 0 rb 26 mmneedle, polypropylene blue monofilament 70 to 75 cm size2 to 0 and 3 by 8 circle reverse cutting 12 mm, silkbraided size 1 by 0 70 to 76 cms taper cut 1 by 2 circleneedle 25mm, skin stappler with stainless steeel staples, synthetic absorbable polygalactin 910 rapid absorptionsize 2 by 0 and 80 to 90 cm circle cutting 30 to 40 mmdouble arm, synthetic absorbable polygalactin 910 orpolyglycolic acid coated with polycaprolate size 1by 0 and70 to 90 cms and 1 by 2 circle rb 20 to 25 mm, syntheticabsorbable polygalactin 910 or polyglycolic acid coatedwith polycaprolate size 2 by 0 and 70 to 90 cms and 1 by 2circle rb 30 to 40 mm, synthetic absorbable polygalactin910 or polyglycolic acid coated with polycaprolate size 3 by0 and 70 to 90 cms and 1 by 2 circle rb 20 to 25 mm, synthetic absorbable polygalactin 910 or polyglycolic acidcoated with polycaprolate size 4 by 0 and 70 to 90 cms and1 by 2 circle rb 16 to 20 mm, face mask 3 ply, tubefeeding smooth plastic infant 38 cm long 5 f with redflexible connector for nasogastric feeding, tube rectalflatus size 18 catheter gauge, urinary leg bag 540ml, nasogastric tube adult 100cm long 14g, naso gastric tube adult100cm long 16g, naso gastric tube adult 100cm long 18g, naso gastric tube adult 100cm long 20gadhesive incise drape 25x30cm, adhesive incise drape5x15cm, apparatus anaesthitic face mask with air cushiontransparent size 0 infant, apparatus anaesthetic facemaskwith air cushion transparent size 1paediatric, apparatusanaesthetic face mask anitistatic with air cushiontransparent size 2 medium, apparatus anaesthetic facemask antistatic with, air cushion transparent size 3 adultwith valve, apparatus anaesthetic face mask antistaticwith air cushion transparent size 4, apparatus oxygeninhalation portable tubing 1 meter with connector for, angiocath 15 g over the needle 4 1/2, catherer suctionendobronchial with terminal transparent non toxic pvctubing size fg 10, length 45 cm, catherer suctionendobronchial with terminal transparent non toxic pvctubing size fg 12 length 50 cm, catherer suctionendobronchial with terminal transparent non toxic pvctubing size fg 14 length 50 cm, chest drainage system, disposable gown, disposable shoe cover, ecg electrodesdisposable, laryngoscope adult bulb for, laryngoscopeinfant bulb for, long i v line 15 g 100 cm, long i v line 18g of 70 cm, long i v line 18 g of 100 cm, endotracheal tubewith bronchial blocker, 6.0 mm-9.0mm, mapleson nonrebreathing system bains circuit, nasal cannula adult, nasal cannula paediatric, needle epidural anaesthesia withluer lock fitting with styllet 15 g ss, needle epiduralanaesthesia with luer lock fitting with styllet 18 g ss, needle spinal anaesthesia with luer lock fitting with styllet25 g ss, mask for nebulizer, outfit venous pressuremanometer complete, paediatric anaesthetic circuitcomplete non-rebreathing system, pressure monitoring line //bid details4 / 134

Central Government/Public Sector

TRN :35757937 | 08 Nov, 2025

Tender Value : 86.55 Lacs

Bangalore - Karnataka

Tender for gem bids for gastroenterology, niv 10520 colonoscopy shorts with divided rear panel, niv 6440 true tome 44 sphincterotome, 251107embolization coils 0point035 5mm diameter and 2 3 4 cmlength, niv 6432 instinct endoscopic hemoclip device 360degree rotatable, 280888 tannebaum type plastic biliarysent 10 fr x 7cm, niv 6429 ercp guidewire visiglide0point035 450 cm, 280887 tannebaum type plastic biliarysent 10 fr x 10cm, 280890 tannebaum type plastic biliarysent 10 fr x 9cm, 280891 tannebaum type plastic biliarysent 8point5 fr x 10cm, 280927 ercp sphincterotometritome dome tip 20 mm cutting wire, 280942 one actionstent introducer system 10fr, niv 6435 balloonreplacement tube peg 24 , 280859 ercp guidewireterumo guide wire point032 x 260 straight tip, 280845biliary dilatation catheter sohendra type 9 fr, 280897uncovered y type self expanding metallic biliary stent, niv 9549 fully covered pancreatic pseudocyst drainagesems electrocautery enhanced with ceramic tip and 10 frdelivery system, niv 22 11232 hybridknife t type i jet 2point3mm dia length 1 point 9m box of5 pcs, niv 22 11233 hybrid knife i type i jet 2point3mmdia length 1 point 9m box of 5 pcs, niv 22 11234 hybridknife o type i jet 2point3mm dia length 1 point 9m box of5 pcs, niv 22 11235 hybrid knifeflex i typet 1point5mm box of 5 pcs, niv 22 11238 pumpcartridge plus for erbe jet box of 5 pcs /bid number: gem/2025/b/6703016* /dated: 29-10-2025 & & / bid document1 / 22

corporations/Associations/Others

TRN :35758736 | 17 Nov, 2025

Tender Value : 2.99 Lacs

Kolkata - West Bengal

Tender for repairing of box drain at 18b, lala babu lane in ward no-006 under br-i, kmc kmc/eec/i/006/117/2025-2026

Central Government/Public Sector

TRN :35743120 | 10 Nov, 2025

Tender Value : 15.00 Lacs

Firozpur - Punjab

Tender for gem bids for demand, bid number gem2025b6828507 dated 30-10-2025 bid document1 53 1 1 xlpe cables for working voltages from 3.3 kv up to andincluding 33 kv as per is 7098 part 2 q3, mcb -miniature circuit - breakers for a.c. operation as per is / iec60898 part 1 q2, compression cable lugs q3, heatshrinkable straight joint kit ht 95 sqmm 11000v grade 3core isi marked, heat shrinkable straight lt joint kit 240sqmm 11000v grade 3 point 5 core isi marked, heatshrinkable lt end joint kit 240 sqmm 11000v grade 3 point5 core isi marked, heat shrinkable ht end joint kit indoor95 sqmm 11000v grade 3 core isi marked, tape insulation25mtr x 20mm width isi marked, plug and socket in sheetmetal box 01 mcb 20 amps isi marked, capacitor obliquecondenser 2.5 mfd, inner brass assembly for geyser 06holes isi marked, transformer oil di electric strength notless than 60 kv best quality, gi pipe medium grade 100mm bore isi marked, gi pipe medium grade 80 mm bore isimarked, gi pipe medium grade 50 mm bore isi marked, submersible pump starter 55 amps isi marked, pvcjunction box for street light, refrigeration gaschlorodifluora methane type cfm 22 r22 of size 1 kgcylinder, sluice valve 80 mm, upvc butterfly valve 160mm, thermostate 230v for geyser 7 inch long isi marked, heating element triangle 2 kw, fuse barrel 11 kv, powercontactor 100 amps isi marked, sluice valve 150 mm, pvcconduit pipe 1 inch dia 3 mtr length round shape isi marked, sluice valve 100 mm, gm gate valve 50 mm, pvc casingcaping 1 inch x 3 mtr long, gm gate valve 20 mm, gmgate valve 25 mm, fuse wire copper tinned 25 swg, submersible tullu water pump 18 w for desert cooler isimarked, spn db 4 way double door isi marked, nrv 80mm, plate 8m modular isi marked, nrv 100 mm, disctype insulator 11 kv, ceiling rose pvc 3 terminal isimarked, single phasing preventer isi marked, upvc butterfly valve 110 mm, primer paint red oxide 1 ltr pack, spndb 12 way double door isi marked, lower shutter forexhaust fan, spn db 8 way double door, adjustablenozzel 2 inch dia for swimming pool, dol starter 25 ampsisi marked, geyser safety valve 0 point 8 mpa isi standard, pvc connection pipe hot and cold 18 inch isi marked, geyser inner tank steel 25 ltrs, upvc foot valve 160 mm, solar heating element 3 kw isi marked, astronomical timerswitch isi marked, grass pad for desert cooler standard size, indicator bulb ac 220v neon type with wire for geyserred and green isi marked, gi elbow 25 mm, brass deadnut 3 oblique 4 inch for geyser isi standard, gi tee 25 mm, pin type insulator 11 kv, fastener 4 inch with screw forinstallation of geyser isi standard, upvc union 110 mm, pvc drain pipe 15 mm bore for ac 3 mtr long, pvc drainpipe 25 mm bore for water cooler 1 point 5 feet long, timer relay switch isi marked, gi nipple 25 mm 6 inchlong, gi nipple 25 mm 4 inch long, gi socket 25 mm, ginipple 20 mm 6 inch long, gi socket 20 mm, gi nipple 20mm 4 inch long, wash basin std size 550x450mm long isimarked, pvc water tank triple layer cylindrical type of1000ltrs capacity isi marked, pvc water tank triple layercylindrical type of 500ltrs capacity isi marked, pvc coverfor water storage tank 500 ltr isi marked

corporations/Associations/Others

TRN :35744221 | 19 Nov, 2025

Tender Value : 2.79 Crore

Bhavnagar - Gujarat

Tender for construction of rcc box for the stormwater drainage network near kharashi

State Government

TRN :35744980 | 06 Nov, 2025

Tender Value : 1.42 Crore

Sepahijala - Tripura

Tender for improvement road from kamalnagar school to bijoynagar via mijanur rahaman house l- 1.005 km under boxanagar block sh gsb wbm 3 carpeting seal coat rcc boxcell rcc retaining wall pucca drain protection wall and other allied works

corporations/Associations/Others

TRN :35745113 | 07 Nov, 2025

Tender Value : 12.46 Lacs

Mumbai - Maharashtra

Tender for construction of box drain at bp p 02 to bp p 34 malad east in pnorth ward in beat no 42

corporations/Associations/Others

TRN :35747958 | 07 Nov, 2025

Tender Value : 15.52 Crore

Surat - Gujarat

Tender for providing and laying strom box /pipe drain surrounding area of sultanabad at outlet-3, phase -1 in south west athwa zone.

Related Searched Keywords : box drain

List of box-drain Tenders

Tender for repairing of box drain at 18b, lala babu lane in ward no-006 under br-i, kmc kmc/eec/i/006/117/2025-2026

Tender for construction of rcc box for the stormwater drainage network near kharashi

Tender for improvement road from kamalnagar school to bijoynagar via mijanur rahaman house l- 1.005 km under boxanagar block sh gsb wbm 3 carpeting seal coat rcc boxcell rcc retaining wall pucca drain protection wall and other allied works

Tender for construction of box drain at bp p 02 to bp p 34 malad east in pnorth ward in beat no 42

Tender for providing and laying strom box /pipe drain surrounding area of sultanabad at outlet-3, phase -1 in south west athwa zone.

Get box drain Tender Alert...

Related Searched Keywords : box drain

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us