Filters

List of c-band Tenders

List of latest c-band Tenders in Indian Tenders. Click on any c-band Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for c-band Tenders.

All-Tenders (349)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :34726472 | 18 Jul, 2025

Tender Value : 0

North 24 Paragana - West Bengal

Tender for gem bids for purchase hex screw, bolt clip(fig no- 4211) o ring (ctlg fig-64) o ring(fig-20) o ring nut o ring gasket washer spring plug (fig-2110) washer cylinder head(ms sl-02) o ring coller(fig-2025) washer hex nut pin washer spring ring snap o ring (ms sl-251) o-ring, rotor ojde spanner 18x21 mm knob(ctlg fig-2075) spnr 8x9 (odje) bushing combination pliers 200mm hammer plug bolt key, woodruff stopper dust indicator(fig-1410) bolt cross pin(fig-2085) hose wire harness seal oil, interlock shaft(fig-24&2135) lock tube lever hose(fig 4130) clamp adjustable spnr (10-25mm) cross head connector, inlet valve, evacuator(fig-1410 oblique 11) gasket 10 mm socket(sl no-g15313) o ring insert valve seat(n495c) lamp indicator eop oil seal seal rectangular ring spnr ojde 10 x 12mm bolt, connecting rod element super to by pass filter (ms sl-69) delivery valve assy rod t-handle universal type 1 by 2 inch (300mm) water temp gauge key switch (ctlg fig-07 & 1060) ojde spanner 36x41 mm(sl no-g15313) tag (ms sl-189) net(fig-49) o ring(fig-21 by 30) 13 mm socket(eqpt sl no g15313) techo hour meter(fig-1055) band bonnet plug (fig no 3025) seal oil plug hydro meter gasket switch(fig-6211, sl no-11) socket wrench 17mm socket wrench 29mm by 30mm 19 mm socket(sl no-g15313) gasket gear cover hour meter cable(ispl fig-15a) nipple (fig no-102) bushing gasket sealing ring for 4 (mico) 32 mm socket(sl no-g15313) housing, rocker brg needle socket wrench 19mm lampassy cap(fig-1410 by 27) shaft element fuel filter cup adjustable wrench 200mm gasket cylinder head(n743) bolt tube assy gasket cover tube fuel supply fork gear shift 5th bearing hose(fig-66) nipple nut rod (ms sl-06) bushing front idler magnet cover band brake o ring tube fan belt(ms sl-62) cover, governor screen hose service kit positive connector kit wire harness (os sl no-1567) element outer lever gear shift(ctlg fig-2075) field coil bearing assy tube clutch plate tube (os sl no-639) holder blade cont lever a (fig-6075) bearing, ball exhust pipe push rod cover rod rod bracket tube, injection no 6 plate cover strainer tube cap (fig no 7006) bracket plug(fig-39) gear guide (5m) filter assy lever 12.7 mm nominal size sq drive socket(sl no-g15313) bracket feed pump assy centrifugal oil filter assy gear driven 4th lever (fig-6015) universal joint 75 mm(sl no-g15313) hose gear guide pin cotter nut bracket arm pump housing(os sl no-542) bearing end plate overflow valve field coil assy valve assy support cover, water outlet (os sl no-651) housing hub pulley light, rotary switch intermediate bearing bracket seat operator quick drop valve lh (fig-6096) gear driven 1st housing thermostat (bd80eng fig no 1710) guard inner lh valve prassure case board floor dfrive assy cage bearing lh bracket rh pump assy cylinder block gasket kit (60 items ) fig no k2 bracket armatureassembly(lucus) flange brake drum (fig no 3005) manifold, exhaust, middle manifold exhaust front bracket assy lh cylinder head gasket kit armature assy (ms sl-599) heater, air mc pump assy(ctlg fig-17) tube cylinder tool box hydraulic tank assy(fig-6015) pump fuel (ptg mvs) turbo charger assy(tel) shaft bevel gear tank assembly(fuel tank)(ctlg fig-1025) camshaft frame rh (p-255)

corporations/Associations/Others

TRN :34726730 | 23 Jul, 2025

Tender Value : 7.42 Lacs

Bankura - West Bengal

Tender for construction of concrete road and road protection work by bullah piling work at shibpur bye lane, chowdhury pond and bande ali galli in ward no-11. under bansberia municipality.

Central Government/Public Sector

TRN :34726922 | 19 Jul, 2025

Tender Value : 0

Jalandhar - Punjab

Tender for gem bids for dglp, inj fentanyl citrate 2 ml 50 mcg per ml, inj fentanyle 50mcg per 10 ml vial, inj dexmedetomidine 100 mcg per ml, inj vecuronium bromide 4mg per ml amp of 1 ml, injketamine hcl 50 mg per ml 2 ml, inj succinylcholinecholride 50mg per ml vial of 2 ml, inj etomidate 2 mg perml 10ml vial, inj phenylepherine 10 mg 1ml, inj atropinesulphate 0 point 6mg in 1ml ampoule, inj glycopyrrolate 0point 2 mg per ml ampl of 1 ml, inj bupivacaine hcl 5 mgper ml heavy amp of 4ml, inj neostigmine 0 point 5mg per1ml, inj lignocaine solution hcl 2 parasent for iv use vial of50 ml, inj oxytocin 5 oxytocic units per 1 ml amp, injparacetamol with cycteine hcl monohydrate infusion1000mg per 100ml, inj rocuronium 10 mg per ml 10 mlvial, inj esmolol pack containing 100mg in 10 ml vials, injnitroglycerine 5 mg, sodium bicarbonate 7point5 parasentamp of 10 ml, inj dopamine hcl 40 mg per ml in amp of 5ml, inj dextrose 25 parasent amp of 25ml, inj calcium 9mg plus calcium gluconate 50 mg inj for iv use 10 ml, injtranexamic acid 500 mg per 5ml, diclofenac suppository100mg, endotracheal tube nasal size 4 point 5 without cuff, laryngoscope adult bulb for, bandage suspensory scrotal, sodium hypochlorite solution 10 parasent, sodiumperborate monohydrate 50 parasent, povidone iodine 7point 5 parasent solution 100 ml, povidone iodine 7 point 5parasent solution 500 ml, sodium hypochlorite 5 parasent, 0 point 5 parasent w v chlorhexidine gluconate in 70parasent v per v ethyl alcohol, 1 parasent w v availableiodine in non oxynoi iodine surfactant base 500 ml bott, chlorhexidine gluconate 2 parasent in 70 parasent isopropylalcohol 500 ml bott, propan 2 ol 63 point 0g equal 72 volparasent benzalkonium chloride purified water sunset, povidone iodine10 parasent solution u s p equivalent to 1parasent available, hydrogen peroxide solution withstabilizer ip 20 volume 500 ml bott, paraformaldehyde tab, povidone iodine solution 5 parasent bottle of 100 ml, liquid paraffin in bottle of 100 ml, povidone iodine 10parasent solution bott of 100 ml, hemostatic spongegelatine 80mm long 50mm broad 10mm thick, cylindercarbon dioxide co2 gas 40 kg for refilling, ethylene oxidegas cartridge, knife bard packer blade size 1 fittingcommercial no 11 packet of 6, knife bard packer blade size1 fitting commercial no 15 pac of 6, knife bard packerblade size 2 fitting commercial no 20 pact of 6, knife bardparker blade size 1 fitting commercial no10 packet of 6, knife bard packer blade size 2 fitting commercial no 22packet of 6, knife bard packer. blade size 2 fittingcommercial no 23 pac of 6, skin graft blades for humbysknife blade pkt of 10 blades, endopath curved merrilanddissector 5mm with unipolar cautery, post operativewaterproof flexible dressing opsite 10 x 15 cm, injetophyllin bp 84 point 7mg and theophyllin ip 25 point 3mg, dressing wound care 20cm x 20cm box of 3

Central Government/Public Sector

TRN :34727162 | 25 Jul, 2025

Tender Value : 75.00 Lacs

Mumbai - Maharashtra

Tender for zone 3 a-1 :-new works & all ordinary repairs works in marine lines -khar section in the jurisdiction of sse ii-mumbai central under adenw-s- bandra

Central Government/Public Sector

TRN :34722967 | 16 Jul, 2025

Tender Value : 0

Varanasi - Uttar Pradesh

Tender for gem bids for digital multimeter q3 . . % % 4 4 /mse exemption for years ofexperience and turnoverno& % & % . . % % 4 4 /startup exemption for years ofexperience and turnoverno 5 5 & & /document requiredfrom sellercertificate requested in atc, oem authorization certificatein case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer7 7 9 9 : : ; ; & 9 & 9 < < 9 9 ; ; > >? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?no @ %@ % ;5 ;5 ; ; /bid to ra enabledno 4 4 /type of bidsingle packet bid a a & c & c /time allowed for technicalclarifications during technical evaluation2 days d /bid number: gem/2025/b/6363684; /dated: 21-06-2025 & & / bid document1 / 10 l l m m n n l l 4 4 / % % < 9 < 9 : : /inspection required byempanelled inspection authority / agenciespre-registered with gemyesinspection to be carried out by buyers ownempanelled agencyyestype of inspectionpre dispatchname of the empanelled inspectionagency/ authorityrites a a n n /evaluation methodtotal value wise evaluation r & r & /arbitration clauseno /mediation clauseno //bid details /emd detail > /advisory bankstate bank of india /emd amount70953 /epbg detail > /advisory bankstate bank of india 4 %/epbg percentage%5.00 m /duration of epbgrequired months.18a. . u % & 4& % & % 4 > w @ 9 /emd exemption: the bidder seeking emd exemption, must submit the valid supporting documentfor the relevant category as per gem gtc with the bid. under mse category, only manufacturers for goods andservice providers for services are eligible for exemption from emd. traders are excluded from the purview of thispolicy.b. , , x l < ; / emd & performance securityshould bein favour of beneficiary, wherever it is applicable. x x /beneficiary : payable at varanasioffice of the senior divisional finance manager, ner, varanasi - 221002, indian railways, north eastern railway, ministry of railwaysfa and cao ner gkp /splitting ; / bid splitting not applied.2 / 10 /mii purchase preference /mii purchase preferenceyes /mse purchase preference /mse purchase preferenceyes1. preference to make in india products for bids < 200 crore:preference shall be given to class 1 local supplieras defined in public procurement preference to make in india, order 2017 as amended from time to time and itssubsequent orders/notifications issued by concerned nodal ministry for specific goods/products. the minimumlocal content to qualify as a class 1 local supplier is denoted in the bid document. if the bidder wants to avail thepurchase preference, the bidder must upload a certificate from the oem regarding the percentage of the localcontent and the details of locations at which the local value addition is made along with their bid, failing whichno purchase preference shall be granted. in case the bid value is more than rs 10 crore, the declaration relatingto percentage of local content shall be certified by the statutory auditor or cost auditor, if the oem is a companyand by a practicing cost accountant or a chartered accountant for oems other than companies as per the publicprocurement preference to make-in -india order 2017 dated 04.06.2020. only class-i and class-ii local suppliersas per mii order dated 4.6.2020 will be eligible to bid. non - local suppliers as per mii order dated 04.06.2020 arenot eligible to participate. however, eligible micro and small enterprises will be allowed to participate .thebuyers are advised to refer the om no.f.1/4/2021-ppd dated 18.05.2023.om no.1 4 2021 ppd dated 18.05.2023 for compliance of concurrent application of public procurement policyfor micro and small enterprises order, 2012 and public procurement preference to make in india order, 2017. 2. purchase preference will be given to mses having valid udyam registration and whose credentials arevalidated online through udyam registration portal as defined in public procurement policy for micro and smallenterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises andits subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail themselves of thepurchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders areexcluded from the purview of public procurement policy for micro and small enterprises and hence resellersoffering products manufactured by some other oem are not eligible for any purchase preference. in respect of bidfor services, the bidder must be the service provider of the offered service. relevant documentary evidence inthis regard shall be uploaded along with the bid in respect of the offered product or service and buyer will decideeligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 isnot an mse and mse seller s has / have quoted price within l-1+ 15% selected by buyer of margin ofpurchase preference /price band defined in relevant policy, such mse seller shall be given opportunity to matchl-1 price and contract will be awarded for 25% selected by buyer percentage of total quantity. the buyers areadvised to refer the om no. f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 forcompliance of concurrent application of public procurement policy for micro and small enterprises order, 2012and public procurement preference to make in india order, 2017. benefits of mse will be allowed only if seller isvalidated on-line in gem profile as well as validated and approved by buyer after evaluation of documentssubmitted. 3. inspection of stores by nominated inspection authority / agency of buyer or theirauthorized representativesan independent third party professional inspection body can help buyer in mitigating buyer s risk with pre-dispatch/post-dispatch inspection in order to ensure that equipment, components, solutions and documentationconform to contractual requirements. the buyer has a right to inspect goods in reasonable manner and withinreasonable time at any reasonable place as indicated in contract. inspection fee/ charges as pre-greed betweenbuyer and inspection agency would be borne by the buyer as per their internal arrangement but may berecovered from the seller if the consignment failed to conform to contractual specification and got rejected bythe inspection officer .if so requested and accepted by the seller, initially seller may pay for inspectioncharges as applicable and get the same reimbursed from buyer if consignment accepted by the inspectingofficer . for reimbursement seller has to submit proof of payment to inspection agency.seller/oem shall send a notice in writing / e-mail to the inspecting officer / inspection agency specifying the place3 / 10 of inspection as per contract and the inspecting officer shall on receipt of such notice notify to the seller the dateand time when the stores would be inspected. the seller shall, at his own expenses, afford to the inspectingofficer, all reasonable facilities as may be necessary for satisfying himself that the stores are being and or havebeen manufactured in accordance with the technical particulars governing the supply. the decision of thepurchaser representative /inspection authority regarding acceptance / rejection of consignment shall be final andbinding on the seller.the seller shall provide, without any extra charge, all materials, tools, labour and assistance of every kind whichthe inspecting officer may demand of him for any test, and examination, other than special or independent test, which he shall require to be made on the sellers premises and the seller shall bear and pay all costs attendantthereon.the seller shall also provide and deliver store / sample from consignment under inspection free of charge at anysuch place other than his premises as the inspecting officer may specify for acceptance tests for whichseller/oem does not have the facilities or for special/ independent tests.in the event of rejection of stores or any part thereof by the inspecting officer basis testing outside owing to lackof test facility at sellers premises, the seller shall, on demand, pay to the buyer the costs incurred in theinspection and/or test. cost of test shall be assessed at the rate charged by the laboratory to private persons forsimilar work.inspector shall have the right to put all the stores or materials forming part of the same or any part thereof tosuch tests as he may like fit and proper as per qap/governing specification. the seller shall not be entitled toobject on any ground whatsoever to the method of testing adopted by the inspecting officer.unless otherwise provided for in the contract, the quantity of the stores or materials expended in test will beborne by seller.inspecting officer is the final authority to certify performance / accept the consignment. the inspectingofficer s decision as regards the rejection shall be final and binding on the seller.the seller shall if so required at his own expense shall mark or permit the inspecting officer to mark all theapproved stores with a recognised government or purchasers mark.digital multimeter 166 pieces 5 5 1 2 & & % % % % z z < < % % 4 4 m m /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively c c /technical specifications c / as per gem category speci cation /speci cation c c /specificationname m m a a /bid requirementallowed valuesmeasurementsdc voltage range1000.0 voltdc voltage accuracy0.05 percentdc voltage resolution0.001 millivoltac voltage range1000.0 voltac voltage accuracy0.5 percentac voltage resolution0.001 millivoltdc current range10.0 amp redc current accuracy1.0 percentdc current resolution0.001 milliamp re4 / 10 ac current range10.0 amp reac current accuracy1.0 percentac current resolution0.001 milliamp reresistance range60.0 megaohmresistance accuracy1.0 percentresistance resolution0.001 ohmcapacitance range microfarad .01 to 1000capacitance accuracy % 1.5capacitance resolution nf0.001frequency range khz 300frequency accuracy % 0.1frequency resolution hz 1temperature range degree c -50 to 1000temperature accuracy % 1.5temperature resolution degree c 1featurestypehand helddisplay digits4.5measurement typetrue rmscounts60000, 70000, 80000, 90000, 100000, 200000, 20000000 or higherother featurescontinuity test and diode testavailabledata loggingavailableif data logging feature isavailable, internal memorymin. 5000 points/ 200 readingscomputer interface along withsoftwareavailablesafetysafety ratingcategory iv 600 v of iec 61010safety certificationce, vdepowerrequirementspower requirementsbattery operatedif battery operated, then typeof batterynon- rechargeable alkalineif non-rechargeable, then sizeof the battery / cellaa /speci cation c c /specificationname m m a a /bid requirementallowed values5 / 10 number of non- rechargeablethe battery / cell2suitable charger / adaptorprovidedyeswarrantywarranty3.0 yearoperatingconditionminimum operatingtemperature-10.0 degree celsiusmaximum operating condition50.0 degree celsiusoperating humidity rh80.0 percenttest reportdetailsthe equipment supplied withcalibration certificateyes /speci cation c c /specificationname m m a a /bid requirementallowed values //@ ; @ ; /consignees/reporting officer and quantity5. .5. ./s.no. //@ ; @ ; /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1rajesh kumarverma221002, senior sectionengineer/signal/n.e. railway/varanasi-22100271452priya ranjan kumar841301, senior sectionengineer/signal/n.e.railway/chhapra-84130175453aalmgir ansari273012, senior sectionengineer/signal/ctc/n.e.railway, in front of accidental carehospital rrb road, gorakhpur-27301220455 5 : : ` `/buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period theadditional time shall commence from the last date of extended delivery period. the additional deliverytime shall be increased quantity original quantity original delivery period in days, subject to6 / 10 minimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the originaldelivery period while exercising the option clause. bidders must comply with these terms.2. scope of supplyscope of supply bid price to include all cost components : only supply of goods3. inspectionnominated inspection agency: on behalf of the buyer organization, any one of the followinginspection agency would be conducting inspection of stores before acceptance:pre-dispatch inspection at seller premises applicable only if pre-dispatch inspection clause has beenselected in atc:ritespost receipt inspection at consignee site before acceptance of stores:consignee4. inspectionpre-dispatch inspection at seller premises fee/charges to be borne by the buyer: beforedispatch, the goods will be inspected by buyer / consignee or their authorized representative or bynominated external inspection agency independently or jointly with buyer or consignee as decided bythe buyer at seller premises or at designated place for inspection as declared / communicated by theseller for their compliance to the contract specifications. fee/charges taken by the external inspectionagency and any external laboratories testing charges shall be borne by the buyer. for in-house testing, the sellers will provide necessary facilities free of cost. seller shall notify the buyer through e-mail aboutreadiness of goods for pre-dispatch inspection and buyer will notify the seller about the authorizedrepresentative/ nominated external inspection agency and the date for testing. the goods would bedispatched to consignee only after clearance in pre-dispatch inspection. consignees right of rejection asper gtc in respect of the goods finally received at his location shall in no way be limited or waived byreason of the goods having previously been inspected, tested and passed by buyer/ consignee or itsnominated external inspection agency prior to the goods shipment. while bidding, the sellers should takeinto account 7 days for inspection from the date of email offering the goods for inspection. any delay ininspection beyond 7 days shall be on the part of the buyer and shall be regularised without liquidateddamages.when there is requirement of submission the advance sample, the seller shall inform the buyer promptlythrough emails about the date of submission of sample to the buyer nominated inspection agency.5. forms of emd and pbgbidders can also submit the emd with account payee demand draft in favour offa & cao ner gkppayable atvaranasi.bidder has to upload scanned copy / proof of the dd along with bid and has to ensure delivery of hardcopyto the buyer within 5 days of bid end date / bid opening date.6. forms of emd and pbgbidders can also submit the emd with fixed deposit receipt made out or pledged in the name of a/cfa & cao ner gkp. the bank should certify on it that the deposit can be withdrawn only on the demand or with the sanctionof the pledgee. for release of emd, the fdr will be released in the favour of the bidder by the buyer aftermaking endorsement on the back of the fdr duly signed and stamped along with covering letter. bidderhas to upload scanned copy/ proof of the fdr along with bid and has to ensure delivery of hardcopy to thebuyer within 5 days of bid end date/ bid opening date7 / 10 7. forms of emd and pbgsuccessful bidder can submit the performance security in the form of account payee demand draft alsobesides pbg which is allowed as per gem gtc. dd should be made in favour offa & cao ner gkppayable atvaranasi. after award of contract, successful bidder can upload scanned copy of the dd in place of pbg and has toensure delivery of hard copy to the original dd to the buyer within 15 days of award of contract.8. forms of emd and pbgsuccessful bidder can submit the performance security in the form of fixed deposit receipt also besidespbg which is allowed as per gem gtc. fdr should be made out or pledged in the name offa & cao ner gkpa/c name of the seller. the bank should certify on it that the deposit can be withdrawn only on thedemand or with the sanction of the pledgee. for release of security deposit, the fdr will be released infavour of bidder by the buyer after making endorsement on the back of the fdr duly signed and stampedalong with covering letter. successful bidder has to upload scanned copy of the fdr document in place ofpbg and has to ensure delivery of hard copy of original fdr to the buyer within 15 days of award ofcontract.9. buyer added bid specific atcbuyer added text based atc clauses1. preferably manufacturers should participate. participating traders/agents must provide authorization letter issued by the oem. authorization letter must be tender speci c. bidders must submit authorization letter along with their offer failing which the offer is liable to be ignored.2. the bidder or its oem themselves or through resellers should have supplied same or

Central Government/Public Sector

TRN :34717078 | 21 Jul, 2025

Tender Value : 0

Mahabubnagar - Telangana

Tender for ka band wr34 waveguide to coaxial adapters

corporations/Associations/Others

TRN :34714044 | 16 Jul, 2025

Tender Value : 1.32 Crore

Anuppur - Madhya Pradesh

Tender for installation of street light with octagonal pole from panchmukhi hanuman mandir to bahera bandh culvert at ward no 14

State Government

TRN :34693752 | 31 Jul, 2025

Tender Value : 0

Bangalore - Karnataka

Tender for supply of bandage cloth

corporations/Associations/Others

TRN :34630894 | 17 Jul, 2025

Tender Value : 3.08 Crore

Kolkata - West Bengal

Tender for supplying and laying of 450 mm diameter ms inlet main from indian overseas bank, manik bandyopadhy sarani road to neheru colony bps j-8 to neheru colony bps kmc/p d/12/2025-26 1st call

Related Searched Keywords : c band

List of c-band Tenders

Tender for construction of concrete road and road protection work by bullah piling work at shibpur bye lane, chowdhury pond and bande ali galli in ward no-11. under bansberia municipality.

Tender for zone 3 a-1 :-new works & all ordinary repairs works in marine lines -khar section in the jurisdiction of sse ii-mumbai central under adenw-s- bandra

Tender for ka band wr34 waveguide to coaxial adapters

Tender for installation of street light with octagonal pole from panchmukhi hanuman mandir to bahera bandh culvert at ward no 14

Tender for supply of bandage cloth

Tender for supplying and laying of 450 mm diameter ms inlet main from indian overseas bank, manik bandyopadhy sarani road to neheru colony bps j-8 to neheru colony bps kmc/p d/12/2025-26 1st call

Get c band Tender Alert...

Related Searched Keywords : c band

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us