Filters

List of drawing-machine Tenders

List of latest drawing-machine Tenders in Indian Tenders. Click on any drawing-machine Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for drawing-machine Tenders.

All-Tenders (31)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :34935054 | 14 Aug, 2025

Tender Value : 3.50 Crore

Mumbai - Maharashtra

Tender for gem bids for for measurement of stern qty 2 n.., custom bid forservices - initial positioning fit up of stern tube a bracket pbracket initial positioning fit up of stern tube a bracket andp bracket as per the line of sight after stern dropmeasurement and closing of all shipping in opening qty 2.., custom bid for services - control welding ndt checks andthermal stress relieving of stern tube a bracket p bracketport side and stbd side controlled welding and thermalstress relieving of stern tube a bracket p bracket qty 2 setas per scope of w.., custom bid for services - line of sightusing optical laser port side and stbd side line of sight isdone to check the position of a bracket stern tube pbracket and temporary supports and equipment withrespect to shaft line qty 2 nos as per scope o.., custom bidfor services - measurement of chock height measurementand analysis of chock height for diesel engine gear box fi-fi pump stern tube bearings p bracket bearings a bracketbearings plummer bearing and finalisation of final los qty 2set as .., custom bid for services - final los port side andstbd side final los for bearings alignment of a bkt p bktstern tube plummer bearing gear box qty 2 set as perscope of work, custom bid for services - resin chocking ofbearings and bolting of bearing housing port side and stbdside resin chocking is for a bracket p bracket stern tubebearing housing diesel engine gear box external fi fi pumpqty 2set as per scope of work, custom bid for services -embarkation outboard shafting and installationembarkation of stern tube shaft plumber bearingintermediate shaft deep sea seal okf flange couplingemergency pitch setting device od box okc sleevecoupling propeller qty 2 se.., custom bid for services -alignment and installation of okc sleeve coupling od boxand okf flange coupling alignment and installation of okcsleeve coupling od box and okf flange coupling qty 2 setas per scope of work, custom bid for services -measurement of bearing clearances port side and stbd sidebearing clearance and poker gauge readings a bracket pbracket stern tube bearings qty 2 set as per scope of work, custom bid for services - installation of deep sea seal andtesting port side and stbd side installation of deep sea sealair pressure test and hydro test and run in alignment qty 2set as per scope of work, custom bid for services -installation of rope guard net cutter and faring cones andshaft turning device port side and stbd side installation ofrope guard net cutter and faring cones and shaft turningdevice qty 2 set as per scope of work, custom bid forservices - gap and sag alignment port side and stbd sidegap and sag alignment of intermediate shaft aft flange wrtokf coupling intermediate shaft fwd flange wrt gb outputshaft flange gb to engine qty 2 set as per scope of work, custom bid for services - setting the size of distance ringport side and stbd side measurement of final size ofdistance ring and to be machined qty 2 nos as per scope ofwork, custom bid for services - gear box tooth contactchecks port side and stbd side mrg tooth contact check1with mrg output shaft disconnected from intermediateshaft 2with mrg output shaft connected from intermediateshaft qty 2 set as per scope of wo.., custom bid forservices - final shaft coupling connection port side and stbdside final connection of shaft line to mrg and engine qty 2set as per scope of work, custom bid for services - jackload test of gear box plummer bearing and stern tube shaftport side and stbd side jack load test of gear box plummerbearing and stern tube shaft when mrg on jack screws qty //bid details2 / 41 set as per scope of work, custom bid for services - mainreduction gear chock fasting port side and stbd sidegearbox base to be chock fasted a per msi and oemrecommendation after satisfactory and acceptance of oemqty 2 set as per scope of work, custom bid for services -bearing jack load checks and mrg tooth contact checks portside and stbd side bearing jack load checks and mrg teethcontact check 3 final with mrg output shaft connectedqty 2 set as per scope of work, custom bid for services -alignment and installation of diesel engine port side andstbd side alignment and installation of main diesel engineqty 2 nos as per scope of work, custom bid for services -installation of torsion meter oil distribution box earthingdevice port side and stbd side balance installation activitiesincluding torsion meter earthing device and cpp oildistribution box qty 2 set as per scope of work, custom bidfor services - propeller & propeller blade installationfollowed by bearing jack load test port side and stbd sidepropeller and propeller blade installation followed bybearing jack load test and feathering checks of cpp systemqty 2 set .., custom bid for services - installation ofbulkhead seals port side and stbd side installation ofbulkhead seals qty 2 nos as per scope of work, custom bidfor services - installation of steering gear system port sideand stbd side marking and structural opening as perreference mdl drawing for installation and welding ofrudder cartridge qty 2 set as per scope of work, custombid for services - installation of steering gear ramfoundation seat and ram base bedding installation of ramfoundation seat bedding and carryout ram installation asper mdl oem drawing qty 2 set as per scope of work, custom bid for services - alignment and calibration ofrudder with tiller assembly arrangement alignment andcalibration of rudder with tiller arrangement qty 2 set asper scope work

corporations/Associations/Others

TRN :34943394 | 21 Aug, 2025

Tender Value : 0

Hyderabad - Andhra Pradesh

Tender for gem bids for diamond, impregnated grinding wheel of size, dia 400mm x 250mm width x 5mm as per annexure and drawing , diamond impregnated grinding wheel, with flanges in mounted condition as per annexure and drawing , diamond, impregnated grinding wheel for, hmt centreless grinding machine as per annexure and drawing , diamond, impregnated grinding wheel for, invap centerless grinding machine as per annexure and drawing

Central Government/Public Sector

TRN :34923090 | 14 Aug, 2025

Tender Value : 0

Pune - Maharashtra

Tender for gem bids for ball pen , pen four colour , ball pen without cap , roller ball gel pen , pen white board marker , permanent marker pen , ohp marker pen , highlighter pen , pencil , eraser , sharpner long point , scale plastic , scale stainless steel , glue stick , fevi quick , post it pad , post it pad large , file tag , file cover with 2 wing logo , insulation tape , brown tape , cello tape , cell aa 1.5 v , cell aaa 1.5 v , drawing pin , folder corporate punch less , box file , display folder , duster , lamination sheet , pocket notepad , notepad , single punching machine , stapler pin , stapler machine , register 2 qr , register 3 qr , register 4 qr , register 5 qr , register 6 qr , clip board , fevicol tube , chart paper , talc sheet , correcting pen , brown paper , sketch pen , strip folder , leaf plastic jacket , knife paper cutter , tape dispenser , battery 1050 r 20 p 1.5 v for blinker light , battery medium size 1.5 v for loud hailer , correcting tape

Central Government And Public Sector

TRN :34925401 | 18 Aug, 2025

Tender Value : 0

Guwahati - Assam

Tender for supply of carbide bit cutting chain assembly set for bcm machine of plasser part no. 64.08.2000.33-84gl one set consisting of following nine items: 1. scrapper shovel plasser part no. 64.08.2038 86 nos., 2. intermediate link plasser part no. 61.04.211 86 nos., 3. round shaft chisel plasser part no.64.08.2034-hm 430 nos., 4. chain bolt plasser part no. 61.04.212 172 nos., 5. bush plasser part no. 64.08.2035 430 nos. 6. fixing pin plasser part no. m8x40din 1481 430 nos. 7. t bolt plasser part no. 61.04.218 172 nos. 8. nut plasser part no. m10din934.8 344 nos. 9 washer plasser part no. b10din127 172 nos., confirming rdso specification: tm/hm/6/111 & rdso drawing: tm/9302 rev-1, make- plasser or equivalent to plasser..

Central Government/Public Sector

TRN :34910795 | 01 Aug, 2025

Tender Value : 11.19 Lacs

Darrang - Assam

Tender for gem bids for mix, haldhi powder, mirchi powder, corinder powder, cumin powder, jeera sabut, garam masala, meatmasala, elachi, dalchini saboot, long, sahi paneer, sabji masala, hing, whoite board marker, dusterboard, notebook slip pad 100page, v gurdstablizer 4kva vgb400, paint assorted, lookingmirror big size, trimer line wire, dummy gun, table glass, drone camera, quad quapter withaccessories, drone camera battery and googles, washing machine 8kg lg semi automatic, diva chair, oxymeter, bp machine digital drtrust, infra redlamp, chuna mati, do pad large, wall mounted fan, notice board 2 x 3, external dvd wrier hp, dgttalc sheet 75mtr dgt, nichiban tape assorted0.5inch, nichiban tape assorted 1inch, nichibantape transparent 0.5inch, nichiban tapetransparent 1inch, register 300page 80gsm rulledpaper, register 260page 80gsm rulled paper, drawing sheet assorted, jk copier paper paper a475gsm, jk copier paper paper fs 75gsm /bid number: gem/2025/b/6482592* /dated: 22-07-2025 & & / bid document1 / 37

Central Government/Public Sector

TRN :34897524 | 28 Jul, 2025

Tender Value : 0

New Delhi - Delhi

Tender for gem bids for ruled book, rulled book, envelop, self stick pad, ball pen, secissor, glue stick, stapler machine, stapler pin, paper clip gem, pin packet, gel pen, punching machine double, white board marker, cdmarker, eraser, xerox paper, scale plastic, colour flag, l folder, cell tape, talc sheet, chart paper, plastic leap jacket folder, executivesignature folder, signature folder, clip boardplastic, drawing pin coloured, slef stick paperflag, slef stick pad, paper cutter, white boardduster, brown tape

Central Government/Public Sector

TRN :34899326 | 01 Aug, 2025

Tender Value : 0

South 24 Parganas - West Bengal

Tender for gem bids for paper fs size century star 75 gsm , paper a5 size century star 75 gsm , tag large green 15 inch long , tag white for file cover tericot , documents storage folder transparent , pencil apsara hb pkt of 10 , tape red premier 42 one and half inch , tape blue premier 42 one and half inch , tape yellow premier 42 one and half inch , tape black premier 42 one and half inch , tape green premier 42 one and half inch , tape transparent half inch , tape transparent one inch , envelope 9x4 inch khaki , envelope 9x4 inch white , envelope 9x4 inch yellow , envelope a3 size yellow inside poly coated , envelope yellow inside poly coated a4 , fevi stick 22gms non toxic , chalk piece large size white dust proof pkt of 10 , refill reynolds red , refill reynolds black , file binder large , file binder med , stickey note pad yellow 2 inch , photo paper glossy a4 kodak 175 gms pkt of 20 , photo paper glossy a4 kodak 150 gms pkt of 20 , fevicol tube 105 gms , fevicol tube 50 gms , stapler machine kangaroo small hd 10d , stapler machine kangaroo large hp 45 , colour flag oddy 3 colour 25x75mm , paper weight crystal 50 gms , cellow butter flow ball pen blue , parker vector metalix chrome trim fountain pen blue , note pad neelgagan spiral no 45 200 pgs , note pad neelgagan spiral no 67 200 pgs , steel scale crown 12 inch , thumb pin plastic multicolour oddy , drawing sheet pink , thumb pin brass oddy , register neelgagan 200 pgs lined , white file cover 14x10 inches

Central Government/Public Sector

TRN :34899511 | 12 Aug, 2025

Tender Value : 39.80 Lacs

West Siang - Arunachal Pradesh

Tender for gem bids for furnishing, vip wooden double bed 2 point 16l x 1 point 87w withmatress godrej almirah double door big size woodenbed side table 3 shelves floor lamp with three shlevesfurniture metal waste bucket small hanger for wall long mirror with frame vip blanket double bed normalblanket double bed bed sheet with pillow cover reynolds door curtain and window curtain for bed room vip photoframe sofa set furniture wooden 5 seater centre tablecoffee table wooden furniture lambs with table smartled tv 53 inch rug carpet 5x3 dining table with fourseater chair wooden vip gas stove 2 burner induction pressure cooker 5 ltr pressure cooker 3 ltr non stick frypen ss cookware set 5 ltr all utensil set kitchen rackstand ss top patila all size 5 to 1 ltr serving bouls andplatters and spoon knife set ss round container all size kitchen clothing tea pot okhli set of dishes plates andbowls and cups set of tableware knives and forks andspoons drinking glasses set of 6 mug and tea cups food storage containers small to large for storing staplesand leftover oven toster grill otg 20 ltr juicer mixer waste bin microwave oven 28l dishwasher shink washing machine full automatic 7 kg 5 point 5 kg fullyautomatic dryer machine automatic heavy iron press withstand cloth dryer stand laundry baskets broom andpan mop stand with bucket duster and pocha cloths toilet bowl cleaner brush and plunger and cleaning supplies garbage bags harpic 1 ltr lizol 1 ltr coine 500 ltr white phynile bucket 20l with mug bathroom towel big hand towel toilet paper with stand bathroom mirror corner stand bathing shop cloth washing dish andpowder hand dryer western toilet seat wash besin towel stand soap stand computer and printer binders lined and blank paper pens and pencil and ruler and bid number gem2025b6363769 dated 22-07-2025 bid document1 105 0 0 eraser and pencil crayons and markers, calculators, voltasdeep frezzer, electric kettle 1 ltr, bukhari, curtain doorsize, solar inverter with battery, solar light 200w, 5 kvagenerator, plastic chairs, plastic table, gyser 10 ltr, exhust fan, curtain rod steel, curtain accessories, carpetroll for floor, foot mat 2x3ft, upvc door 6.5x4 ft, upvcdoor 6 x 3 ft, upvc window with mirror 6x4 ft, upvcwindow with mirror 3x3 ft, upvc door frame, upvcwindow frame, wooden safety 10x1x1, pvc panal forcelling, ordinary rock, filling available excavated earthexcluding rock, supplying and filling in plinth with fine sandunder floors including, supplying chemical emulsion insealed containers including delivery, stone soling underfloors including watering, ns ramming consolidating anddressing complete upto 5 km, providing and laying inposition cement concrete of specified grade excluding thecost of centering and shuttering in footings and bases ofcolumns, all work upto floor plinth level, all work fromplinth level upto floor roof level, centering and shutteringincluding strutting propping, centering and shutteringincluding strutting and propping and removal of form, centering and shuttering including strutting, reinforcementof rcc work including straightening, brick work withcommon burnt, providing half brick masonry with bricks ofclass designation, providing and fixing 1 st quality ceramicglazed wall tiles confirming, providing and laying ceramicglazed floor tiles, providing and laying vitrified floor tiles indifferent sizes, 12 mm thk cement plaster on wall, 15 mmcement plaster on the rough side of single or half brick wallof mix 1 ratio 4, 6 mm thick cement plaster to ceiling, providing and applying white cement based putty of avgthickness, white washing with lime to give an even shadefor new work, finishing walls with water proofing cementpaint of approved brand and maufacture and of requiredshade to give an even shade, applying one coat of cementprimer approved brand, providing wood work in frames offor door and windows, providing and fixing isi marked flushdoor shutters conforming t, providing and fixing aluminiumhandles, providing and fixing aluminum hanging floor doorstopper, providing and fixing aluminium tower bolts, providing and fixing ms grills of required pattern in framesof windows, steel work in built up tubular trusses includingcutting, providing and fixing precoated galvanised ironprofile sheets, providing and fixing precoated galvanisedsteel sheet roofing accessories, providing and fixingprecoated galvanised steel sheet roofing accessories zeropoint 50 mm, providing and fixing thermal insulation ofceiling, weight to be carried by head load from manigongto work site, point wiring in pvc conduit with modular typeswitch, circuit sub main wiring in pvc conduit, 2 x 4 sqmm earth wire for power plug, 2 x 6 sq mm 1 x 6 sq mmearth wire, 2x10 sq mm 1x10sq mm earth wire for commonarea db, 4x10 sq mm 2x10sq mm earth wire for db, 4x16sq mm 2x16sq mm earth wire for db, supplying anddrawing following sizes of frls pvc insulated copperconductor3 x 4 sq mm, supplying and drawing followingsizes of frls pvc insulated copper conductor 3 x 6 sq mm, supplying and drawing co axial tv cable rg, s f pvcconduit, s f modular type switch, s f modular type switchsocket, tv antenna socket outlet, supplying and fixingstepped type electronic fan regulator, supplying and fixingfollowing size modules gi box along with modular base, supplying and fixing following size modules gi box alongwith modular base cover plate for modular switches, //bid details2 / 105 supplying and fixing suitable size gi box with modular plateand cover in front on surface or in reces, supplying andfixing suitable size gi box with modular plate and cover infront on surface or in recess including providing and fixing 6pin 15 by 16 and 5by 6 amps, installation testing andcommissioning of ceiling fan including the down rods ofstandard length, installation of exhaust fan upto 450 mmsweep in the existing opening including making the hole tosuit the size of the above fan making good the damagecoonection testing commissioning etc, extra for fixinglouvers shutters complete with frame for a exhaust, supplying and fixing following way single pole and neutral, supplying and fixing following way prewired tp and n mcbdistribution board, supplying and fixing following wayssurface, providing and fixing following rating, supplyingand fixing 5 amps to 32 amps rating, supplying and fixingfollowing rating and double pole having senstivity crrent upto 300 ma, supplying and fixing 20 amps and 240voltsand spn industrial type socket outlet, providing fixing mpoint v danger notice plate of 200 mm x 150 mm, earthingwith g i earth pipe 4 point 5 mtr long, earthing with g iearth plate 600mm x 600 mm x 6 mm thick includingaccessories, earthing with copper earth plate 600mm x 600mm x 3 mm thick including accessories, providing andfixing 25 mm x 5 mm g i earth strip from earth electrode asrequired, providing and fixing 6 swg dia gi wire on surfaceor in recess for loop earthing as required, supplying thefollowing lighting fixtures including lamps at site rate shallinclude all taxes and duties transportation etc complete, 12inch dia 1 phase exhaust fan 1400 rpm, 2x18 watt cfllight fixture as per wipro cat no wcp 36218 sgw or asequivalent, 48 inch dia 1200 sweep ceiling fan, providingand fixing white vitereous china pedestal type water closeteuropean type w c pan with seat as lid10 litre low levelwhite, providing and fixing wash basin with ci brackets15mm brass pillar taps 32mm cp brass waste of standardpattern, providing and fixing flexible pvc waste pipe forsink or wash basin including pvc waste fittings complete 32mm dia, providing and fixing flexible pvc waste pipe forsink or wash basin including pvc waste fittings complete 40mm dia, providing and fixing 600 x 450 mm bevelled edgemirror of superior glass, providing and fixing viterous chinatoilet paper holder, providing and fixing stainless steel a isi304, providing and fixing chlorinate polyvinyl chloride withclamps at 1 point 00 m, providing and fixing chlorinatepolyvinyl chloride cpvc pipes having thermal stability withclamps at 1 point 50 m, providing and fixing chlorinatepolyvinyl chloride cpvcpipes having thermal stability for hotcold water with clamps at 2 point 00 m, providing andfixing chlorinate polyvinyl chloride cpvc pipes havingthermal stability for hot and cold water supply including allcpvc plain and brass threaded, providing and fixing gunmetal gate valve with ci approved quality, providing andfixing unplasticised pvc connection pipe with brass unions, providing and fixing cp brass bib cock of approved qualityconforming, providing and fixing cp brass long nose bibcock of approved quality conforming to is standards andweighing not less than 810 gms, providing and fixing brassstop cock of approved quality 15mm nominal bore, providing and fixing cp brass shower rose with 15 mm inlet100 mm dia, providing and fixing of cp brass health faucetfor ablution with 1 meter long pvc tube, providing andfixing of 32 mm dia cp brass bottle trap with 190 mm longwall connection pipe in place of pvc waste pipe for wash //bid details3 / 105 basin discharge, providing and fixing of 600 mm long c pbrass towel rail complete with cp brass brackets, providingand fixing of 15 mm dia inlet cp brass adjustable showerwith 190 mm long shower arm complete with flange

State Government

TRN :34899847 | 12 Aug, 2025

Tender Value : 0

Neemuch - Madhya Pradesh

Tender for gem bids for video conferencing camera / web camera v2 q2, television tv v2 q2, all in one pc v2 q2, onlineups v2 q2 . . % % 4 4 /mse exemption for years ofexperience and turnoverno& % & % . . % % 4 4 /startup exemption for years ofexperience and turnoverno 5 5 & & /document requiredfrom sellerexperience criteria, bidder turnover, certificate requestedin atc, oem authorization certificate, oem annualturnover, additional doc 1 requested in atcin case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer7 7 9 9 : : ; ; & 9 & 9 < < 9 9 ; ; > >? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?yes documents submitted as part of a clarification orrepresentation during the tender/bid process will also bedisplayed to other participated bidders after log in -- b b c c 5 5 d d / minimum number ofbids required to disable automatic bidextension1 d /bid number: gem/2025/b/6461391; /dated: 22-07-2025 & & / bid document1 / 22 ; 9; 9 d d, , l l -- / / number of days for which bidwould be auto--extended7 n %n % ;5 ;5 ; ; /bid to ra enabledno 4 4 /type of bidtwo packet bid4 4 q q /primary product categoryvideo conferencing camera / web camera v2 r r & t & t /time allowed for technicalclarifications during technical evaluation2 days u u b b v v u u 4 4 / % % < 9 < 9 : : /inspection required byempanelled inspection authority / agenciespre-registered with gemno r r v v /evaluation methodtotal value wise evaluation x & x & /arbitration clauseno /mediation clauseno //bid details /emd detail > /advisory bankstate bank of india /emd amount25000 /epbg detail b /requirednoa. . z % & 4& % & % 4 > n 9 /emd exemption: the bidder seeking emd exemption, must submit the valid supporting documentfor the relevant category as per gem gtc with the bid. under mse category, only manufacturers for goods andservice providers for services are eligible for exemption from emd. traders are excluded from the purview of thispolicy.b. , , \ u < ; / emd & performance securityshould bein favour of beneficiary, wherever it is applicable. \ \ /beneficiary : collector and sacretory district e-governance societycollector neemuch, general administration department madhya pradesh, n/a, collector neemuch /splitting2 / 22 ; / bid splitting not applied. /mse purchase preference /mse purchase preferenceno /mii purchase preference /mii purchase preferenceno1. estimated bid value indicated above is being declared solely for the purpose of guidance on emd amount andfor determining the eligibility criteria related to turn over, past performance and project / past experience etc.this has no relevance or bearing on the price to be quoted by the bidders and is also not going to have anyimpact on bid participation. also this is not going to be used as a criteria in determining reasonableness ofquoted prices which would be determined by the buyer based on its own assessment of reasonableness andbased on competitive prices received in bid / ra process. video conferencing camera / web camera v2 3 pieces bis requiredyes t t /technical specifications t / as per gem category speci cation /speci cation t t /specificationname b b r r /bid requirementallowed valuesdescription/applicationintended applicationa video conferencing camera are digital cameraspecially designed for use in video conferencingapplication.genric descriptionvideo conferencing cameragenricptz functionyes e-ptz only, yes high precision motorized-ptzor higherresolution maximum eachcamera4k hd 3840 x 2160 pixel or higherpan range minimum0pan range maximum0tilt range minimum0tilt range maximum0zoom range opticalmaximum2x, 3x, 4x, 5x, 10x, 12x, 16x, 20x, 22x, 30x, na orhigherzoom range digital maximummore than 3x - 6x, more than 6x - 9x, more than 9x -12x, 12x - 16x or higherfield of view degreemore than 105-1203 / 22 maximum frame ratesframesper second supported30, 50, 60 or highernumber of mics2control / image processing /focusing featuresnaconnectivityconnectivity outputusb uvc, uacfeature/accessoriessalient featurescmos sensoroptional features/accessoriesnaoperatingconditionsminimum operatingtemperature degree c-10, -5, 0 or lowermaximum operatingtemperature degree c40, 45, 50, 60, 70 or higherrelative humidity noncondensing at 40 deg c %rh80 or loweringress protectionip21, ip20, na or higherwarranty / servicecomprehensive on sitewarranty year5 or highertime duration for repairing/replace the defect duringwarrantywithin two weeksupply of compatible driversand software includedyesbuyer specificrequirementsonline meeting platformsupported application, softwaremicrosoft teams, zoom, cisco webex, google meetcertification / testreporttype of lab which carried outtest of complete product toprove the conformity of productas per governing specificationcertificate of govt.lab/nabl/ilac accredited.agree to provide all relavantdocuments testreport/suuporting document/reports etc to the buyer at thetime of bidding or on demandyes /speci cation t t /specificationname b b r r /bid requirementallowed valuesadditional specification parameters - video conferencing camera / web camera v2 3 pieces specification parameternamebid requirement allowed values4 / 22 package 2 supported audio&video, 3 supported operatingsystem 4 camera1 it should be all-in-one video bar with integrated microphones, speakers, 4k camera with privacy shutter, 2 it should support audio andvideo over the usb, 3 it should support latest windows os and macos 4 integrated uhd 4k 2160 p or higher capture resolution, 90 - 120-degreefov or better, 5x digital zoom or better, group framing, automaticspeaker tracking preferable to have additional ai based features5microphone, 6 speaker5 inbuilt beam array 4-6 or more microphones to capture sound. it shouldsupport full-duplex conversations, acoustic echo cancellation andbackground noise suppression. microphone pickup range should be 15 ft ormore, 100 hz - 15 khz frequency response or better bidder needs to supplywired one external expansion microphone from same oem with accessories.6 inbuilt stereo speakers, output shall be 90 db or better7 other interfaces 8 audiofeatures7 min. 1 x usb 3.0 type c, audio-in/line-in port wi-fi wireless networking formanageability and to connect with byom wireless dongle optional. 8 itshould be possible to pair a mobile phone over bluetooth & use all in onevideo bar as the speaker and microphone for the mobile phone. built-inbluetooth 4.2 or better9 video features 10 cable 11drivers9 when two or more people in the same room talk back and forth, systemshall treat them as if they are in a conversation. if the two speakers arentclose, the usb video bar displays a split screen showing the two peakersoptional. 10 minimum 5 m cable to be supplied to connect the aio withthe usb video bar from same oem 11 smart-camera experiences are builtin - no drivers or software needed plug and play support12 cloud platform certification, 13warranty, 14all requiredspecification12 device should be certified with zoom rooms, microsoft teams, googlemeet etc. cloud platform. bidder compliance certificate for at least twocloud-based platform should be provided. 13 the complete solution shouldbe from the same oem with a 5-year warranty from day one. the productshould bis/ul, ce, fcc, rohs certified. 14 all required specification as perscope of workspecification parameternamebid requirement allowed values* bidders offering must also comply with the additional specification parameters mentioned above. //n ; ^ n ; ^ /consignees/reporting officer and quantity5. .5. ./s.no. //n ; ^ n ; ^ /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1vc setup for mlaoffice/home indistrict neemuch 3ac, vc setup for mla office/homein district neemuch 3 ac345television tv v2 3 set bis requiredyes t t /technical specifications* t / as per gem category speci cation5 / 22 /speci cation t t /specificationname b b r r /bid requirementallowed valuesgenericdescriptiona television set or television receiver morecommonly known as tv is an electronic device forthe purpose of receiving of broadcast of video &audio content as per applicable tv broadcast systemlike ntsc/ pal etc. it enable the user to viewing andhearing programs and news etc as broadcasted /television broadcasts and may have additionalcapabilites to view other infomative programs overinternet.intended applicationto receive and play tv broadcast programs. it isdifferent from monitor which is used as output devicein it systems.type/category/class of tvsetsmart tv2display type/technologyled light emitting diode, oled organic light-emitting diode, qled quantum dot led or highernominal screen size rangeinchesmore than 38 inch - upto 46 inchaudio power minimum10w x 2, 12w x 2, 20w x 2 or higherperformance &featuresmaximum resolutionpixels supported4k ultra hd uhd: 3840x2160, 8k ultra hd:7680x4320 or higherstatic contrast ratio1200 : 1, 1300 : 1, 1400 : 1, 1500 : 1, 1600 : 1, 1700 :1, 1800 : 1, 1900 : 1, 2000 : 1, 2500 : 1, 3000 : 1, 3500 : 1, 4000 : 1, 4500 : 1, 5000 : 1 or highertypical brightness nits300 - 399, 400 - 499, 500 -699, 700-999 or highersalient featureinbuilt speakers, table mountlegs, wall mountbracketoptional featurebuilt-in set-top box, hdr high dynamic range, screen mirroring, built-in wi-fi, wi-fi direct, bluetooth, lanpowerinput power rated voltage230 +-10%, 50hzbee star rating1 star, 2 star, 3 star, 4 star, 5 star or higherrf input &connectivity portsinput portrf input, 1-hdmi port, 1-usb port, 1-vga port, 1-ethernet portaccessoriesaccessories included in thescope of supplyremote control, wall mounting bracket, standoptional accessoriesconnecting cables hdmi, nawarranty, installationcommissioningcomprehensive standardwarrantyyears1 or higherwarranty on display onlyyears3 or highercertification / testreporttype of lab which carried outtest of complete product toprove the conformity of productas per governing specificationcertificate of govt.lab/nabl/ilac accredited6 / 22 agree to provide all relavantdocuments testreport/suuporting document/reports etc to the buyer at thetime of bidding or on demandyes /speci cation t t /specificationname b b r r /bid requirementallowed valuesadditional specification parameters - television tv v2 3 set specification parameternamebid requirement allowed values1 display size, 2 viewingangle, 3 response time, 4input ports, 5output ports1 43 inches or above, 2 178178, 3 9 ms or better, 4 hdmi-3, usb 2.0-1, rj45-1, 5 digital audio out, headphone out6 special features, 7accessories6 smart share/screen share, snmp support to take control of display, wake on lan, built in quad core media player, 7 table stand/wall mount, remote and standard cables8 power supply, 9 powertype, 10 power consumption, 11 certificates8power supply, 9built-in power, 10 120w or less, 11 bis, ul, iso 9001, iso 14001, iso 45001:201812 warranty, 13 operatingsystem, 14 service12 5 years on site, 13 web os/android/taizen with latest os release, 14oem should have registered direct service center in mp to manageservice at district level with toll free number & manufacturing setup in india.15 hdmi cable/ other, 16 allrequired specification15 additional hdmi /other cable to conenct above with aio lengthminimum 10 mtr capable to transfer audio and video both, 16 all requiredspecification as per scope of work bidders offering must also comply with the additional specification parameters mentioned above. //n ; ^ n ; ^ /consignees/reporting officer and quantity5. .5. ./s.no. //n ; ^ n ; ^ /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1vc setup for mlaoffice/home indistrict neemuch 3ac, vc setup for mla office/homein district neemuch 3 ac345all in one pc v2 3 pieces bis requiredyes t t /technical specifications* t / as per gem category speci cation7 / 22 /speci cation t t /specificationname b b r r /bid requirementallowed valuesdescriptiondescription of storeall in one personal computers consist of a mouse, keyboard, display with web camera, inbuilt/integrated microphone array and speakers, aninternal cpu with connection cables and poweradapter with 1 year standard warrantyprocessor numberintel core i5-13500t, intel core i5-14500t, intel corei5-14400, intel core i5-13600t, intel core i7-13700t, intel core i9 12900t, intel core i7-12700, intel corei7-14700t, intel core i5-13500, intel core i5-14500, intel core i9-12900, intel core i7-13700, intel core i7-14700, intel core i9-13900t, intel core i9-13900 orhigherinput devicesmouse connectivitywired, wireless or higherkeyboard connectivitywired, wireless or highertype of keyboardstandard, bilingual or highergraphicsgraphics typeintegratedoperating systemoperating system factorypreloaded withcertificationwindows 11 professionalmemorytype of ramddr4, ddr5 or higherram size gb16storagetype of storage installedwith the systemnvme ssdstorage capacity in gb1024displaydisplay size - diagonal ininches58.1 - 63 22.87 - 24.8panel technologyin plane switching ips or higherportsnumber of ports1-hdmi, 1-dp, universal audio jack, 1- rj-4510/100/1000 ethernet port, 1-usb 3.1 gen 2 type a, 2-usb 3.1 gen 2 type a, 2-usb 3.1 gen 1 type a, 1-usb 3.1 gen 1 type cgenericstandheight adjustableadditional specification parameters - all in one pc v2 3 pieces specification parameternamebid requirement allowed valuesdisplay resolution, displaysizedisplay resolution - min. 1920 x 1080, display size - 23 inch or higherspeaker, connectivityspeaker - dual 2 w speakers or more, connectivity - bluetooth, wi-fi andethernet8 / 22 number of usb 2.0 ports, mouse and keyboardusb 2.0 ports - min. 03, mouse and keyboard - wirelessanti-virus, oem warrantyanti-virus - required with 05-year license, oem warranty - 5 years on siteadditional feature, all requiredspecificationadditional feature - provision to connect hdmi smart tv for audio/video, allrequired specification as per scope of workspecification parameternamebid requirement allowed values* bidders offering must also comply with the additional specification parameters mentioned above. //n ; ^ n ; ^ /consignees/reporting officer and quantity5. .5. ./s.no. //n ; ^ n ; ^ /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1vc setup for mlaoffice/home indistrict neemuch 3ac, vc setup for mla office/homein district neemuch 3 ac345online ups v2 3 pieces t t /technical specifications* t / as per gem category speci cation /speci cation t t /specificationname b b r r /bid requirementallowed valuesgenericrating in kva1.0 kvaswitching technologyigbt-pwminput voltageac single phase 160v - 260v 50hzoutput voltageac single phase 230v +/-1% 50 hzwarranty for ups years3, 4, 5 or higherbattery/backupbankbattery/backup bankprovided with online ups hint: in case the ups issupplied with battery, seller shall ensurecompliance to the gstrates as perrecommendations made inthe 45th meeting of gstcouncil dated 17th sep2021 with batterytype of battery hint: na incase battery not providedsmf-vrla conforming to jisc:8702pt.i, ii&iii, stationary lead acid batteries with tubular positiveplates in monobloc container conforming tois:13369:1992 latest9 / 22 backup time minuteshint: na in case batterynot provided30 minutesminimum guaranteed vah1600 x per kva x per hour of backup timewarranty for batteryyears by batterymanufucaturer/brand hint:na in case battery notprovided3 or higheraccessories with batterynainstallation andcommissioning orserviceinstallation and commissioning covered in the scope ofsupplyprovidedafter sales service turnaround timewithin 48 hours, within 7 dayspreventive maintenance hint:mention timeline if provided, na if not providedmonthly, bi-monthly, quarterly, half yearly, yearly, naor higherother services providedpan india service support on 24 x 7 basisperformance /functionalinbuilt isolation transformerwithoutoverall efficiency %>/ 80% & <90% with inbuilt isolation transformeroverload limit20% overload for minimum 10 minute, 20% overloadfor minimum 5 minute, 50% overload for minimum 1minute, 50% overload for minimum 3 secondstotal harmonic distortionthd%2% maximum @ 100% linear loadother functional featurescrest factor on full non-linear load is not less than 3:1accessoriesaccessoriescabling 6 meters input upto 3m and output upto3m, rack for batteriessalient featuresprotectionprotection for under voltage at battery terminal, protection of over voltagemeteringinput voltage, output voltage, input current, outputcurrentalarms and indicationsindicator for mains presence, indicator for batterycharging and dischargingadditional featurespure sinewave ac outputdesign /constructiontype of design /constructionfloor standingenclosure mm1.2 mm minimum thickness of m.s. sheet duly powdercoateddegree of protectionip21, ip20 or higherother constructional featuresbattery on/off mcb, mains on/off mcb /speci cation t t /specificationname b b r r /bid requirementallowed values10 / 22 operatingconditionsminimum operatingtemperature0, -5 or lower degree celsiusmaximum operatingtemperature40, 45, 50 or higher degree celsiusrelative humidity noncondensing at 40 deg c90, 95 or higher percentbuyer specificrequirementenvironmental test reportrequirementsnabattery test reportnaintended applicationsnetwork it equipmentother requirementsrohs compliancereports andcertificationagree to provide all relevantdocuments testreports/supporting document/reports etc to the buyer at thetime of bidding or on demandyesas per meity government ofindia guidelines ups shall havevalid bis crs certifications asapplicableyes for ups rating upto 10kva /speci cation t t /specificationname b b r r /bid requirementallowed valuesadditional specification parameters - online ups v2 3 pieces specification parameternamebid requirement allowed values1 power output wattage, 2ups type, 3 outputwaveform1 min. 700w, 2 online, 3 pure sine wave ac output, manual bypassfacility4battery voltage, 5 batterycapacity, efficiency4 12v/24v dc, 7ah - 18ah, 5 more than or equal to 85%6overload protection 7 allrequired specification6yes, with auto shutdown 7 all required specification as per scope of work* bidders offering must also comply with the additional specification parameters mentioned above. //n ; ^ n ; ^ /consignees/reporting officer and quantity5. .5. ./s.no. //n ; ^ n ; ^ /consigneereporting/officer /address /quantity; ; ; ; /deliverydays11 / 22 vc setup for mlaoffice/home indistrict neemuch 3ac, vc setup for mla office/homein district neemuch 3 ac3455. .5. ./s.no. //n ; ^ n ; ^ /consigneereporting/officer /address /quantity; ; ; ; /deliverydaysbuyer added bid specific additional scope of work5. .5. ./s.no.document titledescriptionn %n % 4 4 /applicable i.r.o. items1specificationdocumentviewspecification documentall in one pc v23the uploaded document only contains buyer specific additional scope of work and / or drawings for the bid items addedwith due approval of buyer s competent authority. buyer has certified that these additional scope and drawings aregeneralized and would not lead to any restrictive bidding.special terms and conditions-version:1 effective from 22-11-2024 for category video conferencingcamera / web camera v21. note to buyers:the central ministries/ departments and other government buyers, as applicable, shall note that thiscategory is covered under scheme - ii compulsory registration scheme of bis bureau of indianstandards.compulsory registration of goods / articles in this category shall conform to is 616: 2017 and shall bearthe standard mark under a license from bureau of indian standards as per scheme-ii of schedule-ii ofbureau of indian standardsconformity assessment regulations, 2018.buyer shall verify and confirm compliance with the applicable bis order during the procurement andfulfilment process.note to sellers:sellers shall offer and supply products conforming to the corresponding indian standard and mandatorilyregistration as per scheme-2 of bis.non-compliance shall result in action as per gem im policy.buyers and sellers may refer to the relevant s.o at https://www.bis.gov.in/product-certification/products-under-compulsory-certification/scheme-ii-registration-scheme/ special terms and conditions-version:2 effective from 16-10-2024 for category television tv v21. note to buyers:the central ministries/ departments and other government buyers, as applicable, shall note that thiscategory is covered under scheme - ii compulsory registration scheme of bis bureau of indianstandards.compulsory registration of goods / articles in this category shall conform to is 616: 2017 and shall bearthe standard mark under a license from the bureau of indian standards as per scheme-ii of schedule-iiof bureau of indian standardsconformity assessment regulations, 2018.12 / 22 buyer shall verify and confirm compliance with the applicable bis order during the procurement andfulfillment process.buyer shall validate and confirm the comprehensive warranty terms and conditions during theprocurement process. note to sellers:sellers shall offer and supply products conforming to the corresponding indian standard and mandatorilyregistration as per scheme-2 of bis.non-compliance shall result in action as per gem im policy.buyers and sellers may refer to the relevant s.o at https://www.bis.gov.in/product-certification/products-under-compulsory-certification/scheme-ii-registration-scheme/ special terms and conditions-version:3 effective from 26-03-2025 for category all in one pc v21. for buyers:1product verificationa unique device serial number shall be provided by the seller at the time ofsupply, which is mentioned on the product. the buyer/consignee shall beable to verify the complete product details, including configuration, throughthe oem website. the buyer/consignee should be able to perform theseverifications without needing to create an account on the oem website.13 / 22 .operating systema. there is no requirement that the oem of the all in one pc should be adevice partner of microsoft and holding a microsoft authorizationform maf from the software provider.b. microsoft os may be sourced directly from microsoft by oems holdingdevice partner status, and those not holding device partner statusmay source from authorized distributors, i.e., ingram/reddington andtheir authorized channel partners.c. buyers may ensure that maf shall not be made a mandatoryrequirement in bids.d. if supplies are made as per brands of oems who are global devicepartners, then the serial number of the machine supplied can be usedto check the details of the product from the website of the oem.e. in the case of local device partners of microsoft, os details such asthe digital key number should be produced with supplies, and thebuyer may verify them from microsoft.f. in case of other oems who are sourcing from authorized distributorsof microsoft, reddington, or ingram, a copy of the invoice whichcontains the relevant serial number of windows os shall besubmitted with supplies, and the buyer/consignee can verify the samefrom the os server website or by telephone, or both.g. in respect of verification of os, the consignee shall take necessarysteps at the time of acceptance. for device partner machines, buyerscan check the all in one pc oem website to verify the os by enteringthe pcs serial number and part code number. for entities that are notdevice partners and source os from distributors networks, they mayverify the serial number through the microsoft website or bytelephone, or both.h. in case the product offered is with a dos or linux operating system, such verification of os shall not be applicable.i. buyer shall request for windows hardware compatibility certificatefor window operating system to ensure the supply hardware iscompatible with windows operating system14 / 22 .requirement of oemlogobuyers are advised to note that incorporating a condition stipulating an oemlogo on the motherboard is restrictive and may not be incorporated into thebids.4.warrantya. the buyer may ensure that as soon as supplies are received, arequest for a warranty certificate is made, along with logging into theoem website/call center to verify the certificate.b. the product in gem marketplace direct purchase & l1 purchasecomes with a minimum standard warranty of one year. in case theseller has standard warranty more than one year, the same may bementioned in the catalogue including in the model name and in suchcase higher warranty offered shall prevail/supersede the minimumone year warranty.15 / 22 .om related to mii, localcontent and meityadvice on modeltechnical specificationsbuyers are requested to refer to various oms pertaining to dpiit and meity, as issued from time to time, while making procurement and follow relevantprovisions as applicable.6.check points duringacceptance of suppliesbefore generating the consignee receipt and acceptance certificate crac, the consignee may inspect the system condition and verify that it complieswith the agreed specifications and configurations. in the case of a largenumber of units to be procured, then the buyer may opt for bidding andaccordingly stipulate conditions regarding installation, inspection byconsignees/inspection agency. consignees who receive the supplies shouldbe vigilant and should complete checking to ensure that there is no scopefor the supply of refurbished products. at the time of receiving supplies, theconsignee may adhere to the following to ensure that any discrepancies insupplies can be flagged, taken into account, and reflected while generatingthe crac: i. packing should be checked properlyii. a warranty certificate from the oem should be insisted upon andchecked.iii. instruction manuals and the os installed should be checked.iv. the machine serial number should also be checked through settingsand can be verified from the oem website. the above points are forguidance, and the buyer/consignee may take steps consideredsuitable by them for checking at the consignee end beforeacceptance of systems.v. an escalation matrix for customer grievance redressal shall beinsisted upon by the buyer from the seller at the time of delivery.16 / 22 .hdd/ssd storageretentionbuyer may add their requirement of retention of securely store all hard diskdrives hdds or solid-state drives ssds used in the all in one pc underatc clause.for sellers:1.oem website link/partno for productverificationthe oem shall share the oem website link with the buyer at the time ofdelivery. the offered model details/configuration should be available ontheir website. a unique device serial number shall also be provided at thetime of supply, which is also mentioned on the product. the buyer/consigneeshall be able to verify the complete product details, including configuration, through the shared oem website link.2.changing or alteringthe configurationseller must refrain from changing or altering the configuration of the factorypre-loaded machine. the machine should be delivered to the consignee inits original, factory-approved configuration.3.warrantythe seller shall furnish a valid warranty certificate/tag from the oem to thepurchaser, guaranteeing the products coverage under the specifiedwarranty terms. the warranty certificate should be verifiable through theoem website/customer care center.4.compliance ofextended producer sresponsibilitywith effect from 1.4.23, as per the e-waste rules 2022, epr registration ismandatory for manufacturing entities. therefore, all oems shall hold validepr registration, and the registration number should be reflected in thecatalog parameter. oems shall ensure compliance with all responsibilities asper epr registration applicable from time to time.5.mandatory / statutoryrequirements asapplicableoems shall have to ensure compliance with the mandatory/statutoryrequirements as per the government of india notifications issued from timeto time for hardware and software components, as applicable.6.operating systemit shall be the responsibility of oems to ensure that supplies are made withgenuine operating systems. special terms and conditions-version:1 effective from 06-07-2022 for category online ups v21. in addition to general terms and conditions of gem, the following special t&c shall be applicable foronline ups version 2.0 with reference to installation and commissioning.sellers responsibility: installation and commissioning shall involve all the interconnections, any cablingbetween power source, switch boards within 3 metre range for input power and connecting output power17 / 22 in the scope of seller. buyers responsibility: buyer will ensure well ventilated/covered site/room having requisite powerpoints/distribution board to provide input power to ups as well as to take out power from ups within 3metre of the location of ups placement.the above is not applicable for the stores supplied without installation and commisioning.note: the above is indicative and any incidental requirement related to above responsibilities shall alsobe considered in the responsibilities of buyer/seller as applicable.5 5 : : a a/buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period theadditional time shall commence from the last date of extended delivery period. the additional deliverytime shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the originaldelivery period while exercising the option clause. bidders must comply with these terms.2. genericdata sheet of the products offered in the bid, are to be uploaded along with the bid documents. buyerscan match and verify the data sheet with the product specifications offered. in case of any unexplainedmismatch of technical parameters, the bid is liable for rejection.3. scope of supplyscope of supply bid price to include all cost components : supply installation testing andcommissioning of goods4. turnoverbidder turn over criteria: the minimum average annual financial turnover of the bidder during the lastthree years, ending on 31st march of the previous financial year, should be as indicated in the biddocument. documentary evidence in the form of certified audited balance sheets of relevant periods or acertificate from the chartered accountant / cost accountant indicating the turnover details for therelevant period shall be uploaded with the bid. in case the date of constitution / incorporation of thebidder is less than 3 year old, the average turnover in respect of the completed financial years after thedate of constitution shall be taken into account for this criteria.5. turnoveroem turn over criteria: the minimum average annual financial turnover of the oem of the offered productduring the last three years, ending on 31st march of the previous financial year, should be as indicated inthe bid document. documentary evidence in the form of certified audited balance sheets of relevantperiods or a certificate from the chartered accountant / cost accountant indicating the turnover details forthe relevant period shall be uploaded with the bid. in case the date of constitution / incorporation of theoem is less than 3 year old, the average turnover in respect of the completed financial years after thedate of constitution shall be taken into account for this criteria. in case of bunch bids, the oem ofcategory related to primary product having highest bid value should meet this criterion.6. certificatesbidders offer is liable to be rejected if they dont upload any of the certificates / documents sought in thebid document, atc and corrigendum if any.18 / 22 . certificatesiso 9001: the bidder or the oem of the offered products must have iso 9001 certification.8. service & supportavailability of service centres: bidder/oem must have a functional service centre in the state of eachconsignees location in case of carry-in warranty. not applicable in case of goods having on-sitewarranty. if service center is not already there at the time of bidding, successful bidder / oem shall haveto establish one within 30 days of award of contract. payment shall be released only after submission ofdocumentary evidence of having functional service centre.9. service & supportdedicated /toll free telephone no. for service support : bidder/oem must have dedicated/toll freetelephone no. for service support.10. service & supportescalation matrix for service support : bidder/oem must provide escalation matrix of telephone numbersfor service support.11. buyer added bid specific atcbuyer added text based atc clauses1. it must be noted that normally all correspondence and transactions will be made only with the parties w hose bid have been accepted and not with anybody else. consortium not allowed in any form.2. bidder has to submit technical compliance on oem letter head.3. the manufacturer of the all in one 4k usb video bar and cloud based platform for video conferencing should have at least five technical support personnel stationed directly in madhya pradesh to ensure prom pt technical assistance. official hr documentation is mandatory.4. the manufacturer of the all in one 4k usb video bar and cloud based platform for video conferencing must establish a direct/authorized service center in madhya pradesh to offer immediate support. valid do cumentation for service center must be provided on the oem letterhead.5. the manufacturer for the all in one 4k usb video bar and cloud based platform for video conferencing must have

Central Government/Public Sector

TRN :34885937 | 09 Aug, 2025

Tender Value : 0

Pithoragarah - Uttaranchal

Tender for gem bids for supply, m and l surface excavation exc 30cm deep in hard obliquedense soil, m and l for hardcore of gauge not exc 63mm ofbroken granite stone and deposited and spread and levelledin layers not exc 15cm thick and watered and rammed to atrue surface, m and l for cement concrete 40mm gradedaggregates in foundation filling and mass concrete, m and lfactory made kerb stone of m25 grade cement concrete inposition to the required line and level and curvature andjointed with cement mortar and including making joints withor without grooves, m and l for cement concrete using40mm graded stone aggregate as in filling and massconcrete compelete all as specified and all as directed, mand l for sand filling under floors or in foundations includingwatering and consolidation complete all as specified and asdirected, m and l pre polished machine pressed precastconcrete interlocking paver block of approved shape andcolour, m and l preparation of concrete surfaces of wall andapplying two coat of cement base paint white or tintedcomplete all as specified and directed, m and l reinforcedconcrete pipes and 600mm bore class np3 and laid andjointed complete with collars, s and f solar delineator 1000x 47mm made of polycarbonate and toughened aluminiumalloy body and having height 145mm and diameter is 80mm, cost of construction, cost of iit drawings

Related Searched Keywords : drawing machine

List of drawing-machine Tenders

Get drawing machine Tender Alert...

Related Searched Keywords : drawing machine

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us