Filters

List of electric-device Tenders

List of latest electric-device Tenders in Indian Tenders. Click on any electric-device Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for electric-device Tenders.

All-Tenders (12)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :36288109 | 23 Jan, 2026

Tender Value : 9.07 Lacs

New Delhi - Delhi

Tender for gem bids for rate, pusa electronic safety alarming device for chaff cutter, pusa tele robotic pesticide applicator for greenhouse, pusa tele robotic control system for tractor, pusa areameter, pusa battery mini electric prime mover, pusaelectronic seed metering retrofit module kit for cultivators9 plus 1 units, pusa hot air dryer coupled with biomassfired steam heater, pusa drum type vegetable washer, pusa portable hybrid dryer with biomass fired steamheater, pusa battery operated variable height platform

Central Government/Public Sector

TRN :36282320 | 27 Jan, 2026

Tender Value : 0

Howrah - West Bengal

Tender for electrical (general) work in connection with "installation of cctv surveillance camera at 09 locations ( uts & prs counter, cash office & bs (g) office ) along with 3 nos. monitoring device (pc) at howrah station".

Central Government And Public Sector

TRN :36282660 | 30 Jan, 2026

Tender Value : 0

Bilaspur - Chhattisgarh

Tender for "provision of iot devices/intelligent field devices (ifds) for monitoring & control (indian railways native iot based yield analysis telemetry, recording and control -ir-niyantrac) of electrical general assets like pump, platform (30/70%) lighting, street lighting, lifts, escalators, substation etc. for 07 numbers (belpahar, champa, raigarh, baradwar, naila, akaltara, korba or any other) of amrit bharat stations in bilaspur division of sec railway, bilaspur (chhattisgarh)".

Central Government/Public Sector

TRN :36283417 | 12 Jan, 2026

Tender Value : 19.60 Lacs

Gaya - Bihar

Tender for gem bids for stand instruments mayo adjustable with tray ss stooladjustable with ss top screen light movable steel withthree folds table instrument non folding ss with two ssshelves trolley stretcher complete emergency andrecovery with standard accessories ss wheel chair foldingwith removable arm rest and swinging foot rests complete wheel chair non folding institutional model complete ecgnibp spo2 temp monitor steriliser electric for surgical warming blankets whole body electric heating blanket aspiration unit double bottle vaculyser jar glass 2 litresspare for forceps artery curved on flat 14 point 5cm forceps artery straight 14cm forceps artery curved on flat12 point 5cm forceps artery mosquito curved on flat 12point 5cm box joint stainless steel forceps gouge bonecutting curved on flat with 8mm wide round jaws length17cm stainless steel luer type forceps gouge bone cuttingstraight with 8mm wide round jaws length 17cm stainlesssteel luer type forceps bone cutting 20 point 5cm forceps bowl lifting double jawed 35 point 5cm forcepsdissecting 15 cm forceps dissecting serrated 13cm forceps dissecting serrated 18cm forceps pedicle curvedon flat forceps steriliser moorfield pattern forceps tissue4x5 teeth 20 cm screw joint stainless forceps towelholding cross action hook blunt single hook blunt double hook skin fine pressure sequential compression devicepneumatic compression device retractor two prongedblunt 0 point 95 cm wide x 20 cm long stainless steel retractor blade 19 cm long x 5 point 65 cm wide stainlesssteel retractor langenback 4 point 5 cm x 1 point 25 cm saw gigli set of 2 handle for wire saw total length 50 cmcarbon steel chromium plated gigli type scissors curvedon flat 19 cm scissors shop 23 point 5 cm long carbonsteel chromium plated lister ty scissor dressing sharp and bid number gem2025b7059480 dated 02-01-2026 bid document1 82 0 0 blunt 14 cm long ss, scissor dressing st both points sharp12 point 5cm, syringe and needle destroyer, shears ribwith raspatory adult, stethoscope folding with flatdiaphragm type chest piece, bone lever bristow 22 point 5cm, bone cutting and drilling system complete set withsaggital saw hand piece oscillating blade type with set of 5drill hand piece jacobs chuck 0 cannulated, bone cuttingand drilling system with 8 mm fixed head and reamer shaftdetachable 8 mm dia and reamer head 8 point 5 mm to 12mm with 0 point 5 mm 400 rpm reamer hand piece ao andwire 100 cm, burns bone holding forceps, cannulatedscrew 4 point 5mm system complete, cannulated screw 7point 0 mm set complete, chisel 25 mm wide blade 25 cmlong stainless steel edge bevelled on, crutch adjustablealuminium complete with ferrule rubber, file bone, gougest thomas hospital pattern with rounded end width 0 point65 cm, gouge st thomas hospital pattern with rounded endwidth 0 point 78 cm, gouge st thomas hospital patternwith rounded end width 0 point 95 cm, gouge st thomashospital pattern with rounded end width 1 point 25 cm, kitfor cervical traction complete with head holder two cordswall bracket pair of pulleys and two sets of weights, knifemeniscus smillie straight chisel type blade 17 point 78 cmstainless steel, mallet fluted handle diameter 3 point 5 cm, metal mallet small with three rubber caps carbon steel withchromic plating aluminium, nail impactor and extractor foruniversal nail extractor, osteotome straight stainless steel20 point 32 cm long 0 point 95 cm, osteotome straightstainless steel 20 point 32 cm long 1 point 27 cm, osteotome straight stainless steel 20 point 32 cm long 1point 91 cm, saw plaster cutting electric components asunder, saw plaster engel, stick walking shipton handled 90cm long x 2 point 5 cm dia, stick walking ferrule rubber forto fit new pvms 080251, stirrup extension bohler 8 point75 cm internal width, universal intra medullary nailreaming instruments set, weights for extension set of 6complete with hanger, aluminium case for sterilizationconsisting of drill guide for kwire wire passer 45 mm and 70, bed traction kit size universal, bending plier for reconplates, bone holding forceps self centering with soft leck for, bone holding forceps self centering with soft lock large, bone holding forceps self centering with soft lock medium, bone holding forceps self, bone hook sharp medium, bonehook sharp small, homans bone retractors 22mm, homansbone retractors 24mm, homans bore setractors 43 mm, homans bore setractors 8mm, lc dcp basic instrument, lcp 3 point 5 instrumentation, lcp 4 point 5 by 5 point 0basic instrument for iarge bone, periosteal elevator withhandle 6mm wide, periosteal elevator with handle 14 mmwide, reduction forceps with point with soft lock medium, reduction forceps with point with soft lock small, reductionforceps with point with soft lock large, reduction forcepswith serrated law with soft lock medium, reduction forcepswith serrated jaw with soft lock small, universal chuck witht handle, long nose plier, long reduction forceps parallelwith ball tips, metzenbaum tissue cutting scissor 18 cm, metzenbaum tissue cutting scissor 20 cm, metzenbaumtissue cutting scissor curved 18 cm, metzenbaum tissuecutting scissor curved 20 cm, operating steel chair withback cushion four wheel revolving adjustable height, airsupport mattress ripple bed, x ray film illuminator slimwith led light source single panel for film size 35 x 43 cm inthe panel 220 v 50 hz ac single phase, box viewingnegative fluorescent tube day light 61cm 2 ft 20 watts for, k wire cutter, wire bolt cutter //bid details2 / 82

Central Government/Public Sector

TRN :36284677 | 10 Jan, 2026

Tender Value : 0

Indore - Madhya Pradesh

Tender for gem bids for fitting of fiber designer panel board , design and fixing of false ceiling , provn of base wall , provn of iron frame structure wall to cover area , installation of tiled flooring in lounge area , seating arrangement in lounge area , undergound and wall concealed electrical wiring , lllumination device with 12 watt luminous output , installation of serving counter , pillar of pipe for paneling , air circulatory with high speed efficiency , curved metal roof sheet , display shelfs of 8 mm glass , multi colour print on glass wall , name bd of lounge , designer texture painting on outside wall , stainless steel railing made of 2 pipe with support pillar , fixing of toughened glass wall 12 mm thickness on studs

Central Government/Public Sector

TRN :36271745 | 23 Jan, 2026

Tender Value : 0

Hoshiarpur - Punjab

Tender for gem bids for entry and mid level desktop computer q2, multifunctionmachine mfm v2 q2 * * 2 32 3 / mserelaxation for years of experienceyes | partial | experience - 2 year s * * & % & % 2 32 3 / startuprelaxation for years of experienceyes | partial | experience - 1 year s 4 4 & & /document requiredfrom sellerexperience criteria, bidder turnover, certificate requestedin atc, oem authorization certificatein case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer6 6 8 8 9 9 : : & 8 & 8 ; ; 8 8 : : ? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?yes documents submitted as part of a clarification orrepresentation during the tender/bid process will also bedisplayed to other participated bidders after log in & & a a b b / minimum number ofbids required to disable automatic bidextension1: 8: 8 b b, , e e -- / / number of days for which bidwould be auto--extended3 b /bid number: gem/2026/b/7063637: /dated: 02-01-2026 & & / bid document1 / 12 6 ; 6 ; : : : : / /number of auto extension count1 n %n % :4 :4 : : /bid to ra enabledno 2 2 /type of bidtwo packet bid2 2 q q /primary product categoryentry and mid level desktop computer r r & t & t /time allowed for technicalclarifications during technical evaluation2 days u u a a v v u u 2 2 / % % ; 8 ; 8 9 9 /inspection required byempanelled inspection authority / agenciespre-registered with gemno r r v v /evaluation methodtotal value wise evaluation x & x & /arbitration clauseno /mediation clauseno //bid details /emd detail a /requiredno /epbg detail a /requiredno : / bid splitting not applied. / mii purchase preference / mii purchase preferenceyes : 4 ; 2, : r l1+x% ; / purchasepreference to mii sellers availabele upto pricewithin l1+x%20 : ; 2 2 / maximum percentage of bidquantity for mii purchase preference502 / 12 % - - : 2 2017 6 1/6 2 & % % : 16.09.2020 - / allowparticipation only from class 1/class 2 localsuppliers as per the publicprocurementpreference to make-in-india order2017 date 16.09.2020as amended andapplicable time to timeyes, in compliance with the mii order : dpiit orderasamended and applicable time to time /mse purchase preference /mse purchase preferenceyes ` c % ;2, : r l1+x% ; /purchase preference to mse oems available uptoprice within l1+x%15 ` c ; 2 2 / maximumpercentage of bid quantity for mse purchasepreference251. if the bidder is a micro or small enterprise as per latest orders issued by ministry of msme, the bidder shall berelaxed from the eligibility criteria of experience criteria as defined above subject to meeting of quality andtechnical specifications. the bidder seeking relaxation from experience criteria, shall upload the supportingdocuments to prove his eligibility for relaxation.2. if the bidder is a dpiit registered startup, the bidder shall be relaxed from the the eligibility criteria ofexperience criteria as defined above subject to their meeting of quality and technical specifications. the bidderseeking relaxation from experience criteria, shall upload the supporting documents to prove his eligibility forrelaxation. 3. preference to make in india products for bids < 200 crore:preference shall be given to class 1 local supplieras defined in public procurement preference to make in india, order 2017 as amended from time to time and itssubsequent orders/notifications issued by concerned nodal ministry for specific goods/products. the minimumlocal content to qualify as a class 1 local supplier is denoted in the bid document. if the bidder wants to avail thepurchase preference, the bidder must upload a certificate from the oem regarding the percentage of the localcontent and the details of locations at which the local value addition is made along with their bid, failing whichno purchase preference shall be granted. in case the bid value is more than rs 10 crore, the declaration relatingto percentage of local content shall be certified by the statutory auditor or cost auditor, if the oem is a companyand by a practicing cost accountant or a chartered accountant for oems other than companies as per the publicprocurement preference to make-in -india order 2017 dated 04.06.2020. only class-i and class-ii local suppliersas per mii order dated 4.6.2020 will be eligible to bid. non - local suppliers as per mii order dated 04.06.2020 arenot eligible to participate. however, eligible micro and small enterprises will be allowed to participate .thebuyers are advised to refer the om no.f.1/4/2021-ppd dated 18.05.2023.om no.1 4 2021 ppd dated 18.05.2023 for compliance of concurrent application of public procurement policyfor micro and small enterprises order, 2012 and public procurement preference to make in india order, 2017. 4. purchase preference will be given to mses having valid udyam registration and whose credentials arevalidated online through udyam registration portal as defined in public procurement policy for micro and smallenterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises andits subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail themselves of thepurchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders areexcluded from the purview of public procurement policy for micro and small enterprises and hence resellersoffering products manufactured by some other oem are not eligible for any purchase preference. in respect of bidfor services, the bidder must be the service provider of the offered service. relevant documentary evidence inthis regard shall be uploaded along with the bid in respect of the offered product or service and buyer will decide3 / 12 eligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 isnot an mse and mse seller s has / have quoted price within l-1+ 15% selected by buyer of margin ofpurchase preference /price band defined in relevant policy, such mse seller shall be given opportunity to matchl-1 price and contract will be awarded for 25% selected by buyer percentage of total quantity. the buyers areadvised to refer the om no. f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 forcompliance of concurrent application of public procurement policy for micro and small enterprises order, 2012and public procurement preference to make in india order, 2017. benefits of mse will be allowed only if seller isvalidated on-line in gem profile as well as validated and approved by buyer after evaluation of documentssubmitted. entry and mid level desktop computer 30 pieces 4 4 1 2 & & % % % % d d ; ; % % 2 32 3 a a /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively t t /technical specifications t / as per gem category speci cation /speci cation t t /specificationname a a r r /bid requirementallowed valuesprocessordescription of storesdesktop computer with table mount monitor systemwith compatible chipset as per processor make withminimum 6 usb portcomputer typemid levelprocessor numberamd ryzen 5 5600g, intel core i5 12400 or higheroperating systemfactory pre-loadedoperating system bydesktop oemwindow 11 professionalmemory ramram size memorycard/module in gbcapacity to be installed inthe system16, 32 or higherstoragetype of storage installedwith the systemnvme-ssd plus hdd@7200 rpmssd - storage capacity ingb512, 1024, 2048 or higherhdd - storage capacity ingb1000, 2000 or highermonitoravailibility of monitoryes as per is 13252 part 1screen size in cms53.1 - 58 20.91 - 22.83warrantyon site oem warranty inyear5 or higheradditional specification parameters - entry and mid level desktop computer 30 pieces 4 / 12 specification parameternamebid requirement allowed values1 chipset number 2 processornumber 3 storage 1 4storage2 5 monitor1 intel q670 or higher 2 -intel core i5 12500 or higher 3-minimum 256gb ssd or higher 4-minimum 1 tb sata hdd/ssd hard disk 5-led backlitmonitor 21.5 inches or higher* bidders offering must also comply with the additional specification parameters mentioned above. //n : f n : f /consignees/reporting officer and quantity4. .4. ./s.no. //n : f n : f /consigneereporting/officer /address /quantity: : : : /deliverydays1aashish vashisht146001, punjab & sind bank, zonal office hoshiarpur, sco-23, schno.11, sant harchandsingh longowal nagar, chandigarh road, nearmini secretariat.hoshiarpur-1460013015multifunction machine mfm v2 10 pieces 4 4 1 2 & & % % % % d d ; ; % % 2 32 3 a a /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectivelybis requiredyes t t /technical specifications* t / as per gem category speci cation /speci cation t t /specificationname a a r r /bid requirementallowed valuesgenericdescription of storesmultifunction machine printer with minimum 1 year onsite warranty, including cartridge and powercord/adapterprint technologylasertype of printingmonochrome black, colour or higherprintingprint paper sizea4 and legalminimum print speed perminute as per iso/iec 24734in a4 size-monochromeblack in ppm36 to 40, 41 to 45, 46 to 50, 51 to 55, 56 to 60, 61 to65, 66 to 70, 71 to 80, 81 to 90, 91 to 100, 101 to120, 121 to 140, 141 to 160, 161 to 180 or higherminimum print speed perminute as per iso/iec 24734in a4 size-colour in ppmnot applicable, 1 to 5, 6 to 10, 11 to 15, 16 to 20, 21to 25, 26 to 30, 31 to 35, 36 to 40, 41 to 45, 46 to 50, 51 to 55, 56 to 60, 61 to 65, 66 to 70, 71 to 80, 81 to90, 91 to 100, 101 to 120, 121 to 140, 141 to 160, 161 to 180 or higher5 / 12 minimum speed per minuteas per iso/iec 24734 in a3size-mono in ppmnot applicable or higherminimum speed per minuteas per iso/iec 24734 in a3size-color in ppmnot applicable or higherauto duplexingprinting/coping 2-sidedfeatureyes or higherpaper handlingoriginal document feedertype for scanning andcopyingsingle-pass document feeders spdf or highernumber of main paper tray1connectivityconnectivityusb port, ethernet port, wi-fi /speci cation t t /specificationname a a r r /bid requirementallowed valuesadditional specification parameters - multifunction machine mfm v2 10 pieces specification parameternamebid requirement allowed values1 ram size 2 cartridgetechnology 3 auto duplexprinting and scanning withfacsimile 4 on site warranty1 1 gb or more 2 composite cartridge 3 yes 4 3 years* bidders offering must also comply with the additional specification parameters mentioned above. //n : f n : f /consignees/reporting officer and quantity4. .4. ./s.no. //n : f n : f /consigneereporting/officer /address /quantity: : : : /deliverydays1aashish vashisht146001, punjab & sind bank, zonal office hoshiarpur, sco-23, schno.11, sant harchandsingh longowal nagar, chandigarh road, nearmini secretariat.hoshiarpur-1460011015special terms and conditions-version:6 effective from 28-07-2025 for category entry and mid leveldesktop computer1. for buyers:6 / 12 the category has been created in accordance with the model technical specification issued by theministry of electronics and information technology meity vide letter no. w-43/4/2020-iphw dated 19thaugust 2024, and is based on the parameters defined therein. the specifications applicable to thiscategory are as per the meity model technical specification dated 19th august 2024. accordingly, buyersshall not specify or mandate any particular processor, processor brand, or manufacturer in the additionalterms and conditions atc. in this context, reference may also be made to clause 2e of the gemgeneral terms and conditions gtc, which inter alia states: the specifications shall identify the keyparameters defining the products with all necessary validations related to configuration, type of data, restrictions, range / allowed values, allowed units etc. sellers as well as buyers while offering / buying thegoods / services shall have to comply with the validation rules / restrictions provided for in the categoryspecification. buyers / sellers cannot add parameters and / or drop down values not provided for incategory specification. in view of the above, buyers are not permitted to amend or modify any technicalspecification through the additional terms and conditions, and must ensure full compliance with thepredefined category specifications1productverificationa unique device serial number shall be provided by the seller at the time of supply, which is mentioned on the product. the buyer/consignee shall be able to verify thecomplete product details, including configuration, through the oem website. thebuyer/consignee should be able to perform these verifications without needing tocreate an account on the oem website.2operatingsystem1. there is no requirement that the oem of the desktop system should be adevice partner of microsoft or hold a valid authorisation from microsoft.2. microsoft os may be sourced directly from microsoft by oems holding devicepartner status, and those not holding device partner status may source fromauthorized distributors, i.e., ingram/reddington and their authorized channelpartners.3. buyers may ensure that the authorisation from microsoft shall not be made amandatory requirement in bids.4. if supplies are made as per brands of oems who are global device partners, then the serial number of the machine supplied can be used to check thedetails of the product from the website of the oem.5. in the case of local device partners of microsoft, os details such as the digitalkey number should be produced with supplies, and the buyer may verify themfrom microsoft.6. in case of other oems who are sourcing from authorized distributors ofmicrosoft, reddington, or ingram, a copy of the invoice which contains therelevant serial number of windows os shall be submitted with supplies, andthe buyer/consignee can verify the same from the os server website or bytelephone, or both.7. in respect of verification of os, the consignee shall take necessary steps at thetime of acceptance. for device partner machines, buyers can check thecomputer oem website to verify the os by entering the pcs serial number andpart code number. for entities that are not device partners and source os fromdistributors networks, they may verify the serial number through the microsoftwebsite or by telephone, or both.8. in case the product offered is with a dos or linux operating system, suchverification of os shall not be applicable.9. buyer shall request for windows hardware compatibility certificate for windowoperating system to ensure the supplied hardware is compatible with windowsoperating system3requirementof oem logo buyers are advised to note that incorporating a condition stipulating an oem logo onthe motherboard is restrictive and may not be incorporated into the bids.4processorsintel and amd processors are added as per model technical specification of desktopcomputer issued by ministry of electronics and information technology meity-iphwdivision w-43/4/2020 dated 19 aug 20247 / 12 scope ofinstallationinstallation requirements shall be indicated in the bid by the buyer under theinstallation, commissioning and testing in bid ict clause. in case installation isspecified in the bid, it shall be the responsibility of the seller to ensure that allsystems are installed and satisfactory working is shown to the consignee orauthorized representative of the buyer. however, in case of direct and l1 purchase, installation of the computer system by the seller/oem is mandatory. installation doesnot include the supply of antivirus, ms office, etc., which are to be separatelyprocured by the buyer only.6buyer/consignee obligationsrelating toinstallationit is necessary that the buyer/consignee provide the seller or authorizedrepresentative access to locations, areas, or rooms for the installation of equipment.the seller or authorized representative will install systems and connect them toexisting power lines/networking at no additional charge. the buyer/consignee will beresponsible for electrical wiring, networking, or any other work connected to theinstallation area. the seller shall be only responsible for ensuring the setup of thedesktop systems, configuring, etc., as well as loading software etc. to be provided bythe buyer/consignee. any other site preparation required before installation andconnection of the desktop shall be the responsibility of the buyer/consignee. thebuyer/consignee, if required, will provide space at the installation site for the safestorage of tools, test equipment, and other materials used for installation at nocharge. in case there is a requirement of obtaining an entry pass for allowingrepresentatives to the premises, the same shall be arranged by the consignee.similarly, if there is a requirement of a gate pass for bringing items required forinstallation, the same is to be arranged by the consignee. in scenarios where multiplelocation installations are required, the buyer must indicate complete installationaddresses in the bid document. in the case of other modes of purchase, as soon asthe order is placed, complete details regarding installation may be informed to theseller. this ensures smooth coordination and delivery of products to the respectivelocations.7warrantythe buyer may ensure that as soon as supplies are received, a request for a warrantycertificate is made, along with logging into the oem website/call centre to verify thecertificate.8om related tomii, localcontent andmeity adviceon modeltechnicalspecifications buyers are requested to refer to various oms pertaining to dpiit and meity, as issuedfrom time to time, while making procurement and follow relevant provisions asapplicable.9check pointsduringacceptance ofsupplies before generating the consignee receipt and acceptance certificate crac, theconsignee may inspect the system condition and verify that it complies with theagreed specifications and configurations. in the case of a large number of units to beprocured, then the buyer may opt for bidding and accordingly stipulate conditionsregarding installation, inspection by consignees/inspection agency. consignees whoreceive the supplies should be vigilant and should complete checking to ensure thatthere is no scope for the supply of refurbished products. at the time of receivingsupplies, the consignee may adhere to the following to ensure that any discrepanciesin supplies can be flagged, taken into account, and reflected while generating thecrac: i. packing should be checked properlyii. a warranty certificate from the oem should be insisted upon and checked.iii. instruction manuals and the os installed should be checked.iv. the machine serial number should also be checked through settings and canbe verified from the oem website. the above points are for guidance, and thebuyer/consignee may take steps considered suitable by them for checking atthe consignee end before acceptance of systems.v. an escalation matrix for customer grievance redressal shall be insisted uponby the buyer from the seller at the time of delivery.8 / 12 hdd/ssdstorageretentionbuyer may add their requirement of retention of securely store all hard disk driveshdds or solid-state drives ssds used in the desktop computer under atc clause.11higherconfigurationthe buyer may permit products delivered with advanced usb standards. for example, a usb type-a 3.2 gen 2 port may be acceptable in place of usb type a port version3 point 2 gen 1 for seller:1oem websitelink/part nofor productverification the oem shall share the oem website link with the buyer at the time of delivery. theoffered model details/configuration should be available on their website. a uniquedevice serial number shall also be provided at the time of supply, which is alsomentioned on the product. the buyer/consignee shall be able to verify the completeproduct details, including configuration, through the shared oem website link.2changing oraltering theconfigurationthe seller must refrain from changing or altering the configuration of the factorypre-loaded machine. the machine should be delivered to the consignee in itsoriginal, factory-approved configuration.3warrantythe seller shall furnish a valid warranty certificate/tag from the oem to thepurchaser, guaranteeing the products coverage under the specified warrantyterms. the warranty certificate should be verifiable through the oemwebsite/customer care centre.4compliance ofextendedproducer sresponsibilitywith effect from 1.4.23, as per the e-waste rules 2022, epr registration ismandatory for manufacturing entities. therefore, all oems shall hold valid eprregistration, and the registration number should be reflected in the catalogparameter. oems shall ensure compliance with all responsibilities as per eprregistration applicable from time to time.5mandatory /statutoryrequirementsas applicableoems shall have to ensure compliance with the mandatory/statutory requirementsas per the government of india notifications issued from time to time for hardwareand software components, as applicable.6operatingsystem1. it shall be the responsibility of oems to ensure that supplies are made withgenuine operating systems.2. seller shall ensure to have windows hardware compatibility certificate forwindow operating systems7scope ofinstallation it shall be the responsibility of the seller to ensure that all systems are installed, andsatisfactory working is shown to the consignee or authorized representative of thebuyer. however, in the case of direct and l1 purchase, installation of computersystem by the seller/oem is mandatory.8categoryspecification1. the seller may list products with advanced usb standards. for example, ausb type-a 3.2 gen 2 port may be acceptable in place of usb type a portversion 3 point 2 gen 12. the supply of the monitor shall be in accordance with the parameteravailability of monitor. the details mentioned under description of storeregarding the monitor are applicable only if the monitor is being supplied.special terms and conditions-version:4 effective from 31-01-2025 for category multifunctionmachine mfm v21. for buyers9 / 12 productverificationthe buyer/consignee shall verify the complete product details, includingconfiguration, through the oem website. the buyer/consignee should be able toperform these verifications without needing to create an account on the oem website.2warranty1. the buyer may ensure that as soon as supplies are received, a request for awarranty certificate is made, along with logging into the oem website/callcentre to verify the certificate.2. the product in gem marketplace direct purchase & l1 purchase comes with aminimum standard on site warranty of one year. in case the seller has standardwarranty more than one year, the same may be mentioned in the catalogueincluding in the model name and in such case higher warranty offered shallprevail/supersede the minimum one year warranty.3. buyer shall verify the actual number of prints completed by the multifunctionmachine printer at the time of delivery to ensure that the product has not beenin use prior to delivery to the buyer and may be verified using themultifunction printer s built-in print counter or an equivalent tracking system asavailable with oems.4. buyer may please note that warranty does not cover any consumables i.e.cartridges/toner/ink/developer and such consumables.for sellers3oem websitelink/part nofor productverification the oem shall provide the oem website link to the buyer at the time of delivery. theoffered model details/configuration should be available on the oems website. adevice serial number must also be provided at the time of supply, which must also bementioned on the product supplied. the buyer/consignee must be able to verify thecomplete product details, including configuration, through the provided oem websitelink. 4warranty1. the seller shall furnish a valid warranty certificate/tag in physical or digitalformat from the oem to the purchaser, guaranteeing the products coverageunder the specified warranty terms. the warranty certificate should beverifiable through the oem website/customer care centre.2. the warranty period will be valid for the specified number of years or until theprinter reaches the oem-defined minimum number of prints within thewarranty period, whichever is earlier, i.e. once the printer meets either theminimum number of prints within the warranty period or the time durationspecified, the warranty coverage will end.3. the actual number of prints completed by the printer during the warrantyperiod may be verified using the printer s built-in print counter or an equivalenttracking system.5compliance ofextendedproducer sresponsibilitywith effect from 1st april 2023, as per the e-waste rules 2022, epr registration ismandatory for manufacturing entities. therefore, all oems shall hold valid eprregistration, and the registration number should be reflected in the catalogueparameter. oems shall ensure compliance with all responsibilities as per eprregistration applicable from time to time.4 4 9 9 h h/buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period theadditional time shall commence from the last date of extended delivery period. the additional deliverytime shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the originaldelivery period while exercising the option clause. bidders must comply with these terms.2. genericexperience criteria: the bidder or its oem themselves or through resellers should have regularly, 10 / 12 manufactured and supplied same or

Central Government / Public Sector

TRN :36247702 | 19 Jan, 2026

Tender Value : 0

Secunderabad - Telangana

Tender for supply of hydraulic spring testing machine for compression testing/ deflection, testing and cycle testing of helical spring with respective load for all sizes of helical springs of electric loco bogies of wag-9 locomotive along with digital load indicator and length measurement devicedigital linear scale c/w readout console and data retrievable and storage unit.

Central Government/Public Sector

TRN :36191213 | 02 Feb, 2026

Tender Value : 0

Kharagpur - West Bengal

Tender for supply of roller lifting device complete of tap changer comprising of (a) extension as per repl's pt. no. - s1520-1 or aal's pt. no. - g1520-1 = 1 no. (b) hex. socket hd. screw m8 x 25 to repl's pt. no. - s1520-2 or aal's pt. no. - g1520-2 = 1 no. (c) roll pin dia 4 x 14 mm to repl's pt. no. - s1520-3 or aal's - g1520-3 = 1 no. for electric locos.

Central Government And Public Sector

TRN :36288534 | 27 Jan, 2026

Tender Value : 16.24 Lacs

Port Blair - Andaman And Nicobar Islands

Tender for gem bids for file flat rough double cut , file half round fine double cut , file round fine double cut , file flat fine double cut , file square fine double cut , file triangular fine double cut , scriber , centre punch , try square , divider spring joint , caliper spring joint in-side , caliper odd leg spring joint , ball peen hammer , cold chisel flat and cross cut , measuring tape , engineers rule , pliers combination insulated , pliers long nose , pliers flat nose , line tester , tweezers , surface plate , oil can , bench vice , hack saw tubular metal frame adjustable , snip sheet metal straight nose , snip sheet metal curved nose , anvil , stakes , wooden mallet , round punch , electrical drill portable drill with chuck and key , screw driver plastic handle flat tip , philips screw driver - , soldering iron exchangeable copper tip , knife folded stainless steel , tong tester clamp on multi meter , tenon saw , firmer chisel , rawal plug tool , d.e spanner , ring spanner , quick couples process tube adopter , tong close mouth and pick , welding table for gas and arc , flaring tool set single type for tube. , bending spring external type for copper tube , pipe cutter miniature for copper tube , pinch off tool for copper tube , ratchet spanner , capillary plug gauge , piercing pliers and reversing valve with access fitting , wrench adjustable , valve key , scissor gasket cutting stainless steel , l-allen key , t-allen key set , pipe cutter with built in reamer and space cutter for copper tube , spanner double ended , pipe wrench , hammer ball pein , puller 3 legged with flexible arm , hand blower portable complete , spirit level precision metallic , drill twist , taps and dies complete sets 5 types , plumbing hammer weight , piercing valve , voltmeter ac and dc portable precision grade digital panel board type , ammeter ac and dc portable precision grade digital panel board type , megger , wattmeter multi-range up , multi meter digital type , k.w. meter , pressure gauge digital type , compound gauge digital type , service man thermometer in metal case , gas leak detector for halogen gas , stop watch , vernier caliper , micrometer outside , multi meter analogue type , tachometer digital multi range , micron vacuum gauge , sensor thermometer digital , fin straightened or fin comb , feeler gauge , wire gauge metric and british , dial thermometer remote control armored capillary dial , anemometer for hvac works , compressors testers for small hermetic compressors , digital thermometer , temperature recorder and humidity capacity to record 24 hrs record , instrumentation screw driver set , digital weighing machine , ac 3 phase motor 400v and 50 hz , star delta starter trainer kit , auto transformer starter trainer kit , direct on-line starter d.o.l trainer kit , portable air-lpg brazing kit , three or four door refrigerator inverter type , core drill machine , grinding machine general purpose d.e. pedestal with 250 mm , evacuating and refrigerant charging station , two stage vacuum pump , window air conditioner , split air conditioner , duct able split air conditioner 1.5 ton , recovery unit with cylinders , decibel meter , cassette air conditioner , gauge manifold with gauges , display cabinet , water cooler storage type , water dispenser bubble type hot and cold , ice candy plant , storage type water cooler hot and cold , visi cooler , vrf or vrv training set , vapour absorption refrigeration system

Central Government/Public Sector

TRN :36282328 | 28 Jan, 2026

Tender Value : 0

Ernakulam - Kerala

Tender for supply and installation of power cable and star delta starter panel for fire pump, fact cd, as per tender conditions. supply and installation of power cable and star delta starter panel for fire pump, fact cd

Related Searched Keywords : electric device

List of electric-device Tenders

Tender for electrical (general) work in connection with "installation of cctv surveillance camera at 09 locations ( uts & prs counter, cash office & bs (g) office ) along with 3 nos. monitoring device (pc) at howrah station".

Tender for supply and installation of power cable and star delta starter panel for fire pump, fact cd, as per tender conditions. supply and installation of power cable and star delta starter panel for fire pump, fact cd

Get electric device Tender Alert...

Related Searched Keywords : electric device

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us