Filters

List of electric-power Tenders

List of latest electric-power Tenders in Indian Tenders. Click on any electric-power Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for electric-power Tenders.

All-Tenders (166)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Boards / Undertakings / PSU

TRN :48996540 | 13 May, 2025

Tender Value : 1.47 Crore

Matunga - Maharashtra

Tender for repair, renovation, and reconfiguration of lab 1 at the computer engineering and it engineering department, first floor, vjti, matunga, mumbai.= 1 dismantling of existing partitions, wall paneling, etc., all complete as per site requirements, and stacking the usable materials within building premises as directed by the architect/consultant/ engineer-in- charge, etc. complete. (lead upto 100 meters) 2 removal of cement tiles, existing flooring, wall tiles,marble, polished shahabad flooring, dado with or without bed concrete, including stacking the materials as directed, with all leads, lifts, etc., complete. (lead upto 100 meters) 3 dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts etc. complete. ( lead upto 100 meters) 4 scraping the old paint from the plastered internal surface using a dust-free vacuum paint scraper, followed by coating the entire surface with a mixture of whiting or glue and linseed oil, including the provision of scaffolding, as directed. (the scraping of old paint should be done until the neeru finish of the plaster is achieved.) lead and lift upto 100 meters etc. complete. 5 removing old paint from steel and other metal surfaces and making the surfaces even with hand scrapping, scaffolding etc. complete. 6 removing the existing cement plaster of any thickness without causing dust nuisance, stacking the debris up to a distance of 100 meters, cleaning the site, etc. complete. 7 providing and applying an anti-corrosive chemical to exposed reinforcement of r.c.c. members such as beams, columns, and slabs. this includes one coat of alkaline rust converter (feovert, rusticide, or equivalent) after cleaning the surface with a wire brush, followed by two coats of anti-corrosive, epoxy-based, two-component, zinc-rich primer (materemaco p 130 of basf, phenolic ipnet rb, polyalk flxoprime, or equivalent) for rebar protection on exposed reinforcement. additionally, apply a concrete-penetrating corrosive inhibitor (epco kp-100, polalk ep 113, masterseal 1414 of basf, fosroc, or equivalent) over the adjoining concrete surface. etc. complete. 8 providing and applying a bond coat of approved epoxy resin (masterbrace 1414 of basf, epi bond of krishna conchem, or equivalent) before polymer plaster or concrete to ensure a perfect bond between old concrete and new concrete/polymer plaster surfaces. the bond coat should be applied within half an hour after preparation, conforming to astm c881 type 2. this process includes the use of nylon brushes, scaffolding, labor, etc. complete. 9 providing and applying ready-mix polymer-modified cement mortar with an average thickness of 15mm, using polymer in one or more layers, in a proportion of 1:5:15 (polymer, cement, and quartz sand) as per the manufacturers specifications. the surface should be cured after 72 hours of application using wet gunny bags, etc. complete. 10 providing and applying ready-mix polymer-modified cement mortar with an average thickness of 30mm-50mm, using polymer in one or more layers, in a proportion of 1:5:15 (polymer, cement, and quartz sand) as per the manufacturers specifications. the surface should be cured after 72 hours of application using wet gunny bags, etc. complete. 11 providing and applying a 30mm thick self-curing ceramic polymer microconcrete of an approved make, having a compressive strength above m30, non-shrink, and impermeable, as a filling mortar for load-carrying r.c.c. members in two layers on cleaned concrete surfaces, including honeycomb areas (using manual or mechanical means). the mortar shall be prepared by mixing nicosil c80 and fresh 53-grade cement with the required water-cement ratio to achieve the desired consistency. the application and finishing shall be done by manual trowelling. curing shall be carried out after the initial setting time, in accordance with the manufacturers specifications. the work shall be executed in line with the specifications and as directed by the engineer-in-charge. the work must be carried out by a certified applicator, and the work shall be guaranteed for 5 years. the guarantee shall be provided on a rs. 500/- stamp paper. (the bond coat, as per item no. 08 in the boq, is to be applied before the coating.) 12 providing and applying 12mm thick internal/external ready-mix plaster conforming to is: 4031 (part-4) 1988 and is: 383-1970, in a single coat using cement mortar in a proportion of 1:4, with a special type of polymer additive (approximately 0.4%), on all types of surfaces in all positions, including scaffolding and curing. the plaster shall be followed by a smooth finishing coat of gypsum plaster of 6mm thickness, ensuring an even, smooth surface suitable for painting. complete with necessary curing, scaffolding, and all other related works. 13 providing and applying a priming coat over new/old steel and other metal surfaces, including preparing the surface by thoroughly cleaning oil, grease, dirt, and other foreign matter. the surface shall be scoured with wire brushes, fine steel wool, scrapers, and sandpaper, with scaffolding as required, etc. complete. 14 providing and applying priming coat over new wood and wood-based surfaces, including preparing the surface by thoroughly cleaning oil, grease, dirt, and other foreign matter, sanding, knotting, scaffolding, etc., complete. (brands such as asian paints, dulux paints, nerolac, berger, royal, or equivalent make.) 15 providing and applying two coats of synthetic enamel paint of approved color to new/old structural steel work and woodwork in buildings, including scaffolding if necessary, cleaning, and preparing the surface (excluding primer coat). etc. complete.(brands such as asian paints, dulux paints, nerolac, berger, royal, or equivalent make.) 16 removing and refixingof doors and windows with frames and stacking the materials as directed, including all leads, lifts, labour, fitting etc., complete. (lead up to 100 meters) 17 providing and laying in pattern 600 mm x 600 mm vitrified tile flooring of 8 to 10 mm thickness and confirming to is 15622-2006 ( group bla) of approved make,quality, shade and pattern for flooring . the tile flooring shall be laid in pattern with 2 mm spacers & tiles fixed in cement mortar of 1:4. the rate shall be including floor chipping to attaining required levels, epoxy grouting of joints using approved matching colour tile grout of epoxy grout, necessary protection of the laid floor, acid wash cleaning for any stains before handover. etc. complete as per the drawing, specification and to complete satisfaction of the engineer. rate to include the wastages as per the pattern indicated in the layouts. brands like kajaria, johnson or similar etc. groove shall be filled with grout of approved shade ( brands like laticrete etc.) as dicectedby the engineer-in-charge. etc. complete. basic rate for tile material- rs. 1440/- per sq.m. 18 providing and fixing skirting, including labor, materials, and all related work, etc., complete. rate for skirting of height up to 150 mm. 19 vinyl flooring for hod cabin:providing and fixing approved color homogeneous flooring, 4mm thick with interlocking system, single-layered flexible spc vinyl flooring (spica by tusker vinyl floorings) in roll form, over the provided i.p.s. or kota stone flooring. the flooring will be fixed using approved adhesive, and all joints will be soldered with pvc rods as per the manufacturer’s specifications. the work will be completed as directed, ensuring proper leveling and cleaning. the roll width will be a minimum of 2.0 meters, and the weight of the pvc flooring will be 90 kg per 30 sqm. as directed and approved by engineer in charge. etc complete. basic rate for vinayl flooring material- rs. 900/- per sq.m. 20 providing and laying vitrified mirror/glossy/matte finish tiles of size 590 mm to 605 mm x 590 mm to 605 mm with a thickness of 8 to 10 mm, conforming to is 15622:2006 (group b1a) from an approved make, shade, and pattern, for dado and skirting in the required positions. the tiles shall be fixed in 1:4 cement mortar, including neat cement float, filling of joints, curing, cleaning, and all related work, etc., complete. basic rate for tile material- rs. 790/- per sq.m. 21 providing second-class burnt brick masonry with conventional/i.s. type bricks in cement mortar 1:6 in the superstructure, including striking joints, raking out joints, watering, scaffolding, and all related work, etc., complete. 22 lowering the debris obtained from breaking and removing cement plaster/burnt brick masonry from the first floor by any means, without causing dust nuisance or damage to the structure. the debris shall be stacked as directed by the engineer-in-charge, including cleaning the site, etc., complete. (lead up to 100 meters.) 23 removing and disposing of debris from the site to a dumping ground outside the vjti premises (in accordance with municipal rules), etc. complete. as directed by the engineer-in-charge. (minimum 6 cu.m debris per trip) 24 providing anti-termite treatment to the wooden frames of doors and windows of the existing building as per i.s. 6313 (part-iii), by drilling 6 mm dia. holes at the four corners on one side and the four corners on the other side, at a downward angle of approximately 45 degrees at the junction of the woodwork and masonry. injecting 150 ml of chlorodane 5% w.c. into each hole and sealing with putty, etc., complete, with a 2-year guarantee on bond paper. 25 providing and applying waterproof melamine polish of the required finish to the woodwork by spray machine, including knotting and preparing an even surface by scraping, applying french polish, scaffolding if required, etc., complete.note: the work is to be executed only with prior approval from the superintending engineer. (brands such as asian paints, mrf melamine or equivalent.) etc. complete. 26 providing and fixing ss t/u/l strip profiles for walls, ceilings, tiles, flooring, main doors, interior decoration, bathrooms, and living rooms, including transportation, wastage, labor, etc., complete.shape: t/u/l profilematerial: ss 304 grade stainless steeldimensions: 8 mm to 12 mmlength: 2440 mm (8 feet), 3048 mm (10 feet)type: t-sectionfinish: polishedposition: interiorcolor options: gold, rose gold, black, silver, champagne, antique hairline, antique copperthickness: 2 mm to 8 mmnote: the shape, pattern, color, and design will be directed by the architect/consultant/or engineer in charge. basic rate for material- rs. 850/- per number. 27 providing and fixing ss t/u/l strip profiles for walls, ceilings, tiles, flooring, main doors, interior decoration, bathrooms, and living rooms, including transportation, wastage, labor, etc., complete.shape: t/u/l profilematerial: ss 304 grade stainless steeldimensions: 16 mm to 32 mmlength: 2440 mm (8 feet), 3048 mm (10 feet)type: t-sectionfinish: polishedposition: interiorcolor options: gold, rose gold, black, silver, champagne, antique hairline, antique copperthickness: 2 mm to 8 mmnote: the shape, pattern, color, and design will be directed by the architect/consultant/or engineer in charge. basic rate for material- rs. 850/- per number. 28 providing and fixing sign boards foor doors:specification for waterproof signage boards (12 x 4 inch)size: 12 inches (l) x 4 inches (h) (with size tolerance is plus or minus 1%)material: high-quality, durable acrylic or pvc boardfinish: glossy or matte finish for clear readabilitywaterproof: weather-resistant, suitable for both indoor and outdoor usedesign: custom text, graphics, or logo engraving/printingmounting: wall-mountable with adhesive backing or screw mountscolors: available in multiple colors with contrast for visibility (e.g., white, black, silver)application: ideal for office cabins, rooms, labs, and other signage needsthis durable, waterproof signboard ensures clear and professional signage in various environments. including wastage, etc. complete. basic rate for material- rs. 460/- per number. 29 providing and fixing of 3d wall panels that can be painted as well.size of each panel: 2 x 2 feet.colour: any color, design, or pattern.features: lightweight, fire-resistant, easily diy, 100% recycled.made from natural bamboo plant fiber, etc., complete. basic rate for material- rs. 450/- per number. 30 providing and fixing wooden decorative fluted wall panels/louvered wall panels:material: high-quality wood (mdf, plywood, or hardwood) with a decorative veneer finish.dimensions: 8 feet x 4-5 inchesthickness: 8 mm - 12 mmdesign: fluted design with vertical or horizontal grooves for a decorative effect.color: multicolor/any colour. (customizable to match interior themes).shape: rectangular panels for seamless installation, etc., complete. basic rate for material- rs. 850/- per number. 31 providing and fixing machine cut mirror polished 16 mm to 20 mm thick telephone black / amba white / cat bary brown / rbi red / ocean brown granite stone partition with rounding the edges etc. complete. one side polishbasic rate for granite material- rs. 2530/- per sq.m. 32 providing and fixing oval-type under-counter wash hand basin of 16-inch x 22-inch size and of special color shade, having telephonic black/colored granite of 180mm thick stone black kadappa framework, including chromium-plated coupling bottle trap. the wash basin should be of cera company or equivalent, model no. 3448, as per the detailed drawing or as directed by the engineer-in-charge, etc., complete. (counter size 1.20m x 0.60m). (brands such as jaquar,kohler or equivalent make.) basic rate for wash basin - rs. 6000/- per number. 33 providing and constructing a granite kitchen platform with the installation of a stainless steel sink (600mm x 450mm) as per the detailed drawing, including vertical polished kadappa stone supports (25 to 30mm thick) on both sides, with a kadappa top (35 to 40mm thick) and a polished granite top (16 to 20mm thick). the platform will feature granite strips at the front and both sides, with two vertical granite supports (15 cm height). the top granite will be 75 cm x 40 cm, including cutting and opening for the sink of the required size in both kadappa and granite. the platform size is 5.00 m x 0.60 m, with a height of 0.75 m, etc. complete with all required finishing. basic rate for ss sink- rs. 6000/- per number. 34 supply and installation of 600x600mm modular metal perforated grid ceiling system (cg-01)the ceiling system shall be supplied and installed as per the specifications provided in the tender document, and in accordance with the directions and approval of the engineer-in-charge. the scope includes complete installation with all necessary materials, components, and finishing to ensure proper execution etc. complete. 35 providing and installation of aluminum frame works for partition with ply on both sides and laminate finish: providing and fixing partition aluminum frame work consist of 25mm x 50mm x 1.2mm thick extruded aluminium box section framework at spacing not exceeding 600mm centre to centre both ways (horizontal and vertical). the framework shall be secured at floor structural ceiling and sill/ lintel level with 25 x 50mm x 1.2mm thick horizontal aluminium section. framework to be secured to floor / walls / columns / ceiling / beams using 75mm metal screws and dowels.acoustic infill: providing & fixing acoustic insulation of approved make to g.i./ aluminum/ ms/ wooden frame partition of 50mm thick rockwool of density 48 kg/m with blanket wrapped in rp tissue suitably affixed to partition framework using where necessary gi binding wire duct tape as indicated in the drawing.outer skin:- providing and fixing 18mm plywood of brands like greenply, century or equivalent. finished with 1 mm thick laminate of approved shade applied on plywood of brands like formice, royal touche or equivalent brand.note: rate is as per aluminum framework with both side ply and laminate. etc. complete. 36 providing and fixing of laminate cladding with ply backing:providing and fixing 12mm bwr plywood (brand: greenply, century, or equivalent), directly fixed to the column. a 1mm thickness laminate of an approved shade, applied on the plywood surface. laminate brands: formica, royal touche, or equivalent. etc complete. 37 providing and installation of glass partition (toughened glass): providing 12mm toughened fixed glass partition including all patch fittings, ensuring smooth and even flush joints between glasses, fixing the same in positions to true line and level, finishing the wall joints with clear silicon sealants, cleaning the surface and ensuring that there are no scratch marks on the glass etc. complete as per drawing and specifications, glass brands should be dorma, ozone or equivalent. 38 providing and installation of glass partition (dgu glass): double-glazed unit glass with air spacer of 6 to 16mm, 95% transparency, etc. complete as per drawing and specifications, dorma or ozone or equivalent. 39 providing and installation of 12mm thick clear toughened glass door with film as required. (d2 - 0.91 x 2.10 m) specification:hardware: door to be complete with hardware to each leaf as follows: hinges: 8 nos. ss ball bearing butt hinges. door closer: concealed door closer with hold open. lock set: dead lock as approved.door handles:900mm ht. 36mm dia d type offset handle on both sides in approved powder coating. door stop: floor mounted door stopper as approved seals: drop down floor seal as approved. security system: na note: all the metal profile sections and hardware finish should match the frame. brands like dorma or ozone or equivalent. etc. complete as per drawing and specifications. 40 providing and installation of d1 - double door two-way sliding motorized door, suitable for door openings up to 1.20 meters with a maximum door weight of 100kg (both leaves). the door offers environmental protection with a working temperature range of -20°c to +50°c and is rainproof. it has a standard opening time of 3-8 seconds, with a remote control operating distance of 100 to 200 feet (depending on line of sight). the opening size is 2.4m x 2.10m, and the glass door size is 1.2m x 2.10m. brands like dorma, ozone, or equivalent, to be installed as per drawing and specifications. etc. complete. 41 providing and installation of d3 - 1.09m x 2.10m (single shutter) 12mm toughened glass door with fixed side panels, including all patch fittings, locking mechanisms, and ensuring smooth, even flush joints between the glass panels. the door is to be fixed in position to true line and level, with wall joints finished using clear silicone sealant. the surface should be cleaned and inspected to ensure there are no scratch marks on the glass. installation to be completed as per drawing and specifications, with brands like dorma, ozone, or equivalent. etc. complete. 42 pop punning: providing and applying of plaster of paris punning(1st quality isi approved pop) over plastered with minimum thickness of 8mm-12mm to existingwall surfaces, ceilings & concrete members etc., to be finished in line and plumb with smooth surface ready to receive paint base. rate to be inclusive of edge protection (gi), fibre mesh for service conduits,hacking wall surfaces for better bonding, cleaning, scrubbing the surface, providing grooves if necessary etc., complete as per architects/consultant/engineer-in-charges approval. brands like gyproc, armstrong, shera or equivalent etc. complete. 43 plastic emulsion paint (leed compliant, low voc): providing and applying plastic emulsion paint finish to walls, partitions, and ceiling surfaces of approved make, color, texture, and shade in two coats, with surface and finish acceptable to the engineer in charge to be achieved within these two coats. any additional coats, if required, shall be at the contractors cost. the work includes preparing existing surfaces by scraping away loose particles, dust, etc., washing and scrubbing, filling cracks with crack filler and binder, cleaning and making the surface dust-free, applying water-based rj london putty as directed, rubbing with sandpaper to smooth the surface, and applying one coat of primer as recommended by the approved paint manufacturer. the work also includes providing necessary scaffolding, cleaning, and protecting the site until handover, as well as masking and protecting all service devices such as switchboards, detectors, etc. the work is to be completed at all heights and leads, as per specifications or as directed by the architect/engineer in charge/consultant. brands like asian paints, berger, or equivalent are acceptable. etc. complete. 44 providing and applying premium decorative wallpaper high-end or custom designs (special finishes, custom patterns)specifications: material: non-woven fabric or vinylroll size: 21 inches wide x 33 feet long (covers 55 sq ft)pattern: various styles (floral, geometric, etc.)finish: matte, gloss, or texturedinstallation: peel & stick or pastefeatures:scratch & water-resistanteasy to clean (wipeable)fade-resistanteco-friendly, voc-freeideal for: living rooms, offices, and accent wallsmaintenance: clean with a damp cloth, no harsh chemicalscustom options: available in various colors and patterns, custom designs upon request. basic rate for wallpaper rs. 600/- per sqm. 45 standing platform (300-450 mm from ffl):construction of a standing platform at a height of 300 mm to 450 mm from the finished floor level (ffl), as per approved dimensions. the platform will be made of 18 mm thick wood (century, greenlam, or equivalent) and finished with wood polish (asian paint wood tec, mrf, or equivalent).materials:frame: mild steel or aluminum, powder-coated for corrosion resistance.surface: high-quality plywood, mdf, or approved materials with a non-slip finish.support: sturdy metal beams or supports for stability.features:height: 300 mm to 450 mm from ffl, as per design.finish: non-slip surface with smooth edges and protective coating.safety: non-slip tread and optional guardrails. etc. complete. 46 stage flooring: supply and installation of interlocking rubber tile flooring at the stage area as per the specifications and drawings provided. the flooring will consist of a 6.0 mm synthetic sport surface, including a =1.50 mm pur protect® treated vinyl surface layer, calendared and grained, supported by a pvc density single closed-cell foam, and reinforced with a fiberglass grid structure. it will feature sanosol treatment for fungistatic and bacteriostatic properties. the flooring will meet the following standards: weight: 3.7 kg/m², impact resistance (en 1517) =8 n/m, abrasion resistance (en iso 5470-1) =350 mg, shock absorption (en14808) =25% (labosport result = 28%), indentation resistance (en 1516) =0.5 mm, ball bounce (en 12235) =90%, vertical deformation (en 14809) =3.5 mm, sliding coefficient (en 13036-4) 80–110, fire (en 13501-1) cfl-s1, anti-viral activity (human coronavirus 229e) – iso 21702 (99.37% after 2 hours), energy return (nf p 90 203) =0.31 m/s, tvoc after 28 days <100 micrograms/m³ (iso 16000-6), floor score®, ce marking, en14904 compliant for multi-sports use, reach compliant, and singapore green label certified. the supply and installation will include making good any damaged surfaces using standard fillers such as birla white cement, cement-based grout, epoxy grout, or mortar, and repainting to match the color.all work will be completed in accordance with the specifications, design, drawings, and the direction of the engineer-in-charge. 47 providing and fixing of overhead storage as per the specifications and drawings provided in the tender document. etc. complete. 48 providing and fixing of surface storageas per the specifications and drawings provided in the tender document. etc. complete. 49 providing and fixing on-site a lab table as per the specifications and drawings provided in the tender document. etc. complete. 50 providing and fixing of office desk/table in faculty lounge as per the specifications and drawings provided in the tender document. etc. complete. 51 providing and fixing of office desk/table in office for hod as per the specifications and drawings provided in the tender document. etc. complete. 52 supply and installation ofhod cabin chair as per the specifications and drawings provided in the tender document. etc. complete. 53 supply and installation of faculty lounge chairs as per the specifications and drawings provided in the tender document. etc. complete. 54 supply and installation of study chairs for labs as per the specifications and drawings provided in the tender document. etc. complete. 55 supply and installation of foldable desklet tables for the seminar hall as per the specifications and drawings provided in the tender document. etc. complete. 56 removingthe exisitng light fixures, fans, wires, cables, swith boards and distribution boards etc. complete. 57 point wiring for independent plug, concealed type in min 20 mm isi marked hms pvc conduit with 1.5 sq.mm (2+1e) fr grade copper wires, modular type switch and socket, earthing and required accessories as per specification no wg-pw/sw. (brands for conduits precision/finolex/pressfit. and for cable barnds should be polycab/finolex/havells. etc. complete 58 point wiring for independent plug, concealed type in min 20 mm isi marked hms pvc conduit with 2.5 sq.mm (2+1e) fr grade copper wires, modular type switch and socket, earthing and required accessories as per specification no wg-pw/sw. (brands for conduits precision/finolex/pressfit. and for cable barnds should be polycab/finolex/havells. etc. complete 59 supplying and erecting flush type shockproof plug socket 6a & 16a (6 pin) with 16a / 25a switch combined with indicator lamp and fuse with gang box on wooden board.make /brand (roma/ legrand,/ greatwhite) etc. complete 60 supplying and erecting isi mark modular type 3 pin 6a / 16a multi socket with safety shutter, duly erected on providedplate and box with wiring connectionsetc.complete. brand : roma/gretwhite/legrand) etc. complete 61 supplying and erecting pvc surface modular double mounting plate 3 modules complete duly erected etc complete.(.brand roma/gretwhite/collar) 62 supplying and erecting pvc surface modular double mounting plate 4 modules complete duly erected etc complete.(.brand roma/gretwhite/collar) etc. complete 63 supplying and erecting pvc surface modular double mounting plate 6 modules complete duly erected etc complete.(.brand roma/gretwhite/collar) etc. complete 64 supplying and erecting pvc surface modular double mounting plate 8 modules complete duly erected etc complete.(.brand roma/gretwhite/collar) etc. complete 65 supplying and erecting pvc surface modular double mounting plate 12 modules complete duly erected etc complete.(.brand roma/gretwhite/collar) etc. complete 66 supplying and erecting regular/ standard model ceiling fan of 1400mm with sweep complete erected in position as per specification no. fg-fn/cf brand /orient/polycab/crompton etc. complete 67 supplying and erecting flush-type ceiling fan regulators and electronic step regulators for ceiling fans (600mm, 900mm, 1200mm, and 1400mm sweep), complete with installation on the provided switchboard. make/brand: roma, legrand, or greatwhite. 68 providing and fixing 36 watt 2x2 light fitingsupplying and erecting square shaped crca /die-cast aluminium powder coated housing led panel light (slim edge-lit) 600x600mm suitable for 36 w-40w includingmotion sensor led light with provision for plane front frame with translucent cover fixed to the housing etc.complete .brand philips/havels/wipro etc. complete 69 supplying and erecting 16 to 32 a dpmcb suitable to fix in 2 module of modular switch in provided box complete & duly concealed with necessary material and connected. (make/ brand: legrand/ schneider/ l&t/ indo asian) etc. complete 70 supplying & erecting triple pole and neutral distribution board (tpndb), 3 pole/4 pole mccb as incomer & outgoing sp mcb (24 poles) or tp mcb of 8 ways (24 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/gi frame (vertical busbar type) as per specification no. sw-swr/mcbdb1 (make/ brand: legrand/ schneider/ l&t/ indo asian) etc. complete 71 providing & erecting 3 pole mccb, 415 v, 100a, rated short-circuit breaking capacity 25 ka (ics=100% of icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/uv/tripalarm contact. mccb with phase barriers on both sides, insulation withstand capacity 800v, no line-load bias in provided enclosure/panel as per specification no. sw-swr/mccb (make/ brand: legrand/ schneider/ l&t/ indo asian) etc. complete 72 supplying, erecting & commissioning 4 pole rccb 63a, electromagnetic type with 30/100/300 ma sensitivity with earth leakage trip indication complete as per specification no. sw-rccb/rccb. (make/ brand: legrand/ schneider/ l&t/ indo asian) 73 supplying & erecting 2 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, nylon rip cord & grey colour sheathed with fr pvc, conforming to itd specification s/ws 113c laid in provided pvc casing capping/conduit as per specification no. wg-tw etc. complete. cables brands should be polycab/finolex/havells. etc. complete 74 supplying and installing cat-6 cable suitable for networking as per specification no. wg-coc/nc. cables brands should be polycab/finolex/havells. etc. complete. 75 supplying & erecting mains with 2 x 2.5 sq.mm. and earth wire 1.5 sq.mm frlsh pvc copper wire in hms pvc conduit min. 20mm dia. as per specification no: wg-ma/pc.etc complete. brand :polycab/finolex/havels) etc. complete 76 supplying, erecting & terminating xlpe armoured cable 3 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 swg) g.i. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no.cb-lt/cu(brand: polycab/ finolex/ havells)note - the quantity of wires for looping the required number of air conditioning units has to be calculated by the contractor with respect to the provided architectural working drawing. etc. complete 77 providing & erecting hot dipped galvanised cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) gi sheet of 150 mm width & 20 mm height complete with necessary hardware. cable tray brands should be profab or equivalent. etc. complete 78 supplying and erecting pvc box trunking of size 100x50 mm. with accessories on wall/ceiling as per specification no: wg-ma/box. etc. complete (make/ brand: legrand/ schneider/ l&t) 79 supply & fixing of aluminum box section to be laid on the floor with all excavation, re-cementing & refinishing civil works to make good in line with the existing floor level respective junctionbox to be fabricated in 16 swg gi sheet with cut out as required for terminating the box sections. shall include pvc conduits from jb to work station powerpoints i)150 x 150x 50 mmgijunction box with cover & cut outs etc. complete. (make/ brand: legrand/ schneider/ l&t) 80 supply of a.c split unit (2 ton) :supply of ac split unit as per the specifications, and drawings provided in tender document. make (carrier/ voltas/ bluestar/ samsung) etc. complete 81 supply of 2 ton casatte ac:2 ton inverter casette ac. cooling capacity 3200-8000 watt. offers uniform 360 degree round airflow, with 4 star energy rating. etc. complete. make (carrier/ voltas/ bluestar/ samsung) etc. complete 82 installation of 2 ton ac split unit etc. complete 83 installation of 2 ton ac cassette unit etc. complete 84 supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with rohs compliant suitable for refrigerant having 22swg thickness and inner dia/size 22mm complete. etc. complete. material selection should be high quality and from reputed brand as directed by engineer in charge. 85 supply & installation electrical communication cable between indoor to outdoor units.cables brands should be polycab/finolex/havells. etc. complete. 86 providing and fixing in position ms frame stand for a.c. units, floor or wall mounted, with vibration isolation pads and frame to be made out of required ms sections strong enough to hold the weight of the ac unit,and should be lockable, including fixing in position using necessary scaffolding, ladder etc, and painting with two or more coats ofapproved enamel paint on a coat of red oxide etc. complete 87 insulated condensate water drain piping constructed out of pvc / hdpe hard pipeswith 6mm thick nitride insulation, fitting, accessories, bends, elbows, tees, flanges, tapings, wall sleeves, hangers, supports, anchors fasteners and concealed in brickwork or flooring. etc. complete(make: finolex/ astral/ prince) 88 supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided pc / copper pipes having 9 mm thickness and inner diameter / sizes 28 mm for solar water heater/ac system. etc. complete. material selection should be high quality and from reputed brand as directed by engineer in charge. 89 supplying & erecting crca sheet metal enclosures of 1.2mm thickness with 20a, 2 pin plug & earth socket and 20a, 3 pin plug top with 20a/30a single pole mcb having rated short - circuit breaking capacity (icn) 10ka complete erected on angle iron/ gi frame. etc. complete 90 carrying out core cutting of size 3 to 5 dia x 15 length in the c.c./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original. etc. complete 91 supply and installation of roller blindsas per the specifications and drawings provided in the tender document. etc. complete. basic cost for blind cloth fabric material rs.900/- per sq.m. 92 carrying out test for ceramic tiles / vitrified tileswater absorption, modulus of rupture (set of 6 tiles) etc. complete. 93 carrying out test for plywood: determination of resistance to dry heat,determination of moisture content,determination of density,thickness of plywood. etc. complete. 94 carrying out test for test for glue adhesion for plywood etc. complete. 95 carrying out test for hollow / solid /aac blocksdensity test. (set of 3 blocks), compressive strength. (set of 3 blocks), water absorption test (set of 3 blocks) etc. complete. 96 providing and fixing 15 mm dia. cpvc pipe on walls, ceiling, or floor with necessary fittings, and remaking the demolished portion, etc., complete. this includes removing the existing pipeline if necessary, conveying, and stacking the same in the pwd chowky or as directed, etc., complete. (brands such as astral, finolex, prince or equivalent make.) 97 providing and fixing 20 mm dia. cpvc pipe on walls, ceiling, or floor with necessary fittings, and remaking the demolished portion, etc., complete. this includes removing the existing pipeline if necessary, conveying, and stacking the same in the pwd chowky or as directed, etc., complete. (brands such as astral, finolex, prince or equivalent make.) 98 providing and fixing 25 mm dia. cpvc pipe on walls, ceiling, or floor with necessary fittings, and remaking the demolished portion, etc., complete. this includes removing the existing pipeline if necessary, conveying, and stacking the same in the pwd chowky or as directed, etc., complete. (brands such as astral, finolex, prince or equivalent make.) 99 providing and fixing on walls/ceiling/floor 32mm dia cpvc pipe with necessary fittings, remaking good the demolished portion, etc., complete. including removing existing pipeline if necessary and conveying and stacking the same in pwd chowky or as directed, etc., complete. (brands such as astral, finolex, prince or equivalent make.) 100 providing and fixing 75 mm dia stabilizer pipe/p.v.c. soil vent/waste pipe with necessary fixtures and fittings, such as bends, tees, single junctions, slotted vent, clamps, etc., complete. 101 providing and fixing 100 mm dia stabilizer pipe/p.v.c. soil vent/waste pipe with necessary fixtures and fittings, such as bends, tees, single junctions, slotted vent, clamps, etc., complete. (brands such as astral, finolex, prince or equivalent make.) 102 providing and fixing 10 cm pvc nahani trap with grating, etc., complete. (brands such as astral, finolex, prince or equivalent make.) basic rate for nahani trap is rs. 380/- 103 providing and fixing c.p. pillar cock long neck with aerator of approed make including necessary sockets/union nut etc. complete. basic rate for pillar cock is rs. 1250/- per number 104 providing and fixing of exhaust fan 150mm crompton/havels/usha or equivalent etc. complete. basic rate for exhasut fan is rs.1000/- per number 105 providing and fixing stainless steel round napkin hanger for bathroom/towel holder for wash basin/napkin holder/bathroom (chrome) b. heavymaterial stainless steel product dimensions 17l x 5w x 19h centimetersfinish type chromeinstallation type wall-mounted shape round including fitting etc. completed.basic rate for material is rs. 320/- 106 providing and fixing premium front glass shelf - bathroom shelf/kitchen shelves wall mounted with frosted and toughen (tradition 6 x 18) chrome including fitting etc. complete. basic rate for material is rs. 650/- 107 providing and installation of 6 mm thick mirror with 6 mm thick ply backing, as per design. the mirror will be supported by stainless steel finished buttons, etc., complete. (the glass brand should be saint-gobain, borosil, or an equivalent make) basic rate for mirror is rs. 1250/- per sq.m. 108 supply and installation of nsd make smoke detectormodel:66a, certification: ce & ertl etc. complete. 109 supply and installation of nsd make heat detectormodel:66h, certification: ce & ertl etc. complete. 110 supply and installation of response indicator make: nsdmodel: p.s (mini) etc. complete. 111 supply and installation of manual call point (m.s) make nsd 112 supply and installation of 08 zone fire alarm panel make nsd(excel) etc. complete. 113 supply and installation of flasher hooter make nsdmodel no: ms17flash etc. complete. 114 supply and installation of supply & laying 1.0 sq. mm x 2 core copper armored isi cable for alarmsystem. with accessories per meter. brand/make :polycab/finolex/havellls) etc. complete. 115 supply and installation of high quality co2 fire extinguisher (6 kg)type:carbon dioxide (co2) fire extinguisher (for electrical fires and flammable liquids)capacity: 6 kgfire rating: class b (flammable liquids) class c (electrical fires)material: cylinder: steel or aluminum alloyfinish: red powder-coated for durabilityoperating pressure: 55 bardischarge time: approx. 8-10 secondsdischarge range: 3-5 feettemperature range:operating: -10°c to +60°c storage: -30°c to +60°cmounting: includes wall bracket certification: is 15683 (india) / ul/ce certified etc. complete.note: the rates for all fire safety alarm items include the complete supply, installation, commissioning, transportation, freight, and all associated costs. 116 providing architectural/ interior design services : scope of work as below:drawings preparation: 3d views, floor plans, furniture layout, electrical layout, ceiling layout, and partition layout.color scheme & material selection: guidance on colors and material choices for finishes, flooring, and furniture.quality control: ensure standards for structural, civil, electrical, fire safety, furniture work and hvac work.interior planning: optimize lab functionality and aesthetics, including furniture, partition design, and system planning (electrical, hvac, fire safety).modifications: suggest changes to designs based on site conditions and client feedback.coordination & monitoring: ensure project progress and timely completion by working closely with contractors. deputation of interior designer degree/diploma/certificate course having knowledge of autocad and 3d home or equivalent for the full period of the work. designes. monitor on-site execution, ensuring design adherence. taking joint measurements.preparing statements for extra items and excess quantities.compliance & safety: ensure adherence to safety codes and regulations. etc. complete.

Central Government/Public Sector

TRN :34439733 | 10 May, 2025

Tender Value : 1.72 Lacs

Shillong - Meghalaya

Tender for gem bids forcalibration services - electrical rf microwave electrotechnical; voltage current power acdc frequency power factor phase angle resistance; nabl labs; buyer premises onsite

Central Government/Public Sector

TRN :34442030 | 16 May, 2025

Tender Value : 4.65 Crore

Nasikcity - Maharashtra

Tender for gem bids for custom bid for services - supply installation testing and commissioning of ring main electrical power distribution system western sector at hal township ojhar

Central Government/Public Sector

TRN :34426789 | 14 May, 2025

Tender Value : 0

Pune - Maharashtra

Tender for gem bids for lv7 stln 8030 001186 sealing compound anabond 673 , lv7 stln 4330 000565 filter element coalescer filter , lv7 stln vf x 7472700 engine speed sensor dg 6 , lv7 stln vf b 5432012 assy of door shell lh , lv7 stln b 7788101 s a of fly wheel , lv7 stln vf f 8283900 air filter primary , lv7 stln vf f h001800 starter motor , lv7 stln 2590 024062 cable assy control , lv7 stln vf 2940 72 0309856 water filter , lv7 stln 2940 72 0467508 element oil filter , lv7 stln 4820 057512 p 1014151 parts kit pressure regulating valve , lv7 stln vf f 8041500 direction indicator , lv7 stln bon00678 driver cabin door lock left , lv7 stln 2920 005455 relay solenoid eng starter electricals , lv7 stln 2530 018130 p 2400951 parts kit power steering , lv7 stln vf 3110 72 0472398 bearing ball annular , lv7 stln 2940 003886 b 7094101 sa of fuel pipe feed pump to filter , lv7 stln vf 5340 72 0475277 knob inner lock

Central Government/Public Sector

TRN :34426900 | 15 May, 2025

Tender Value : 0

Jabalpur - Madhya Pradesh

Tender for gem bids for m2 5999 004728 contact electrical gun electro magnet assy , m2 5999 004729 contact electrical for contactor magnetic siemens type no 3ty 1 210 1 oa 3ty 1 210 1 oa , m2 1010 002666 wiring harness branched 13 connections panel power distribution , m2 1010 002684 tail light rear system 40mm aa l 70 gun , m2 5330 012582 seal rubber special shaped section 75mm o a dia 4 fixing holes of 70mm dia , m2 5330 013055 ring sealing torroidal synthietic rubbeer o d 202mm cross section , m2 5330 015093 ring sealing torroidal synthetic rubber synthetic rubber 214mm , m2 5335 000352 packing preformed compressed asbestos fibre jointing , m2 5999 004844 cap electrical rubber domeshaped 21mm o a dia 34mm o a dia , m2 5335 000355 packing preformed compressed asbestos fibre jointing id 17mm od 24mm , m2 5335 000353 packing preformed compressed asbestos fibre jointing id 30mm od 36mm 075thk , m2 1010 002673 wiring harness branched 8 connections panel power distribution , m2 1010 002677 wiring harness branched 30 connections slip ring assembly , m2 5930 003657 switch push 40mm aa l 70 gun main motor stop assy , m2 5950 006313 inductor audio frequency 015h at 1kc s 1 volt working voltage 220 volts ac 50hz , m2 6210 000701 lighting panel bofors type x26 11 with ba 9s socket , m2 5335 000354 packing preformed compressed asbestos fibre jointing id 18mm od 22mm , m2 5995 001873 cable assy special purpose electrical 3 core cable switch 535mm lg bof 6181702

Central Government/Public Sector

TRN :34427144 | 16 May, 2025

Tender Value : 0

Ernakulam - Kerala

Tender for gem bids for vehicle scanning reader 15 mtrs range including pole and pole mount bracket programmable logic controller for in and exit gate industrial server system high end support rapid read zebra application real time display count with web application identification for four wheeler vehicles identification for two wheeler 3m outdoor weather proof industrial hand held reader long range reader with built in battery ai camera android application on handheld device parking management software web based real time data acquisition for all type of vehicle count civil fabrication pole and electrical works installation training and commissioning including wires network and power switches

State Government

TRN :34422574 | 14 May, 2025

Tender Value : 0

Asansol - West Bengal

Tender for laying of power cable from wbsedcl meter room to chlorine room with some other electrical mountings

Central Government/Public Sector

TRN :48838034 | 10 May, 2025

Tender Value : 23.50 Lacs

Jaipur - Rajasthan

Tender for tender for rate contract rfp for supply stationary, computer media, consumables and other office items for a period of 1 year , category- 1 refurbishing of toner , canon toner 320 , canon toner 324 , canon toner 328 , canon toner 337 , hp toner 05a , hp toner 230a , hp toner 287a , hp toner 6511a , hp toner 77a , hp toner cc388a , hp toner ce 278a , hp toner cf280a , hp toner q 2612a , category-2 compatible toner , canon toner 320 , canon toner 324 , canon toner 328 , canon toner 337 , hp toner 05a , hp toner 230a , hp toner 287a , hp toner 6511a , hp toner 77a , hp toner cc388a , hp toner ce 278a , hp toner cf280a , hp toner q 2612a , category-3 storage, memory & others (with standard oem warranty) , cable- hdmi cable 1.5 meter , cable- hdmi cable 20 meter , cable- hdmi cable 5 meter , cable- printer cable (usb) , cable- vga cable standard size 1.5 meter , dvd-rwith cover frontech/samsung/moserbaer/hp/sony) , external hard disk drive 1 tb usb powered (seagate/wd/transcend) , external hard disk drive 2 tb usb powered (seagate/wd/transcend) , external hard disk drive 4 tb usb powered (seagate/dell/sony/wd/transcend) , external solid state drive 512 gb ssd usb powered (seagate/wd/aarvex) , hdmi connector , head phone with mic (bluetooth)(logitech/iball/hp/dell/zebronics/boat) , head phone with mic (wired)(logitech/iball/hp/dell/zebronics/boat) , internal solid state drive 1 tb ssd (seagate/wd/transcend/aaevex) , internal solid state drive 250 gb ssd (seagate/wd/transcend/aaevex) , internal solid state drive 250 gb ssd nvme, m.2 port (seagate/wd/transcend/aaevex) , internal solid state drive 500 gb ssd (seagate/wd/transcend/aaevex) , internal solid state drive 500 gb ssd nvme, m.2 port (seagate/wd/transcend/aaevex) , keyboard- mechanical keyboard (tvs gold) , keyboard- usb keyboard (logitech/iball/hp/dell) , keyboard- wireless keyboard & mouse combo (logitech/iball/hp/dell) , keyboard- wireless keyboard (logitech/iball/hp/dell) , mouse- optical wireless mouse (logitech/iball/hp/dell) , mouse- usb optical mouse (logitech/iball/hp/dell) , ram ddr4- desktop (16 gb) (hynix/samsung/transcend/kingston) , ram ddr4- laptop (16 gb) (hynix/samsung/transcend/kingston) , usbpen drive (3.1 and above) 128 gb (kingston/sandisk/hp/moserbaer/transcend) , usbpen drive (3.1 and above) 16 gb (kingston/sandisk/hp/moserbaer/transcend) , usbpen drive (3.1 and above) 64 gb (kingston/sandisk/hp/moserbaer/transcend) , usb hub 4 port ) (logitech/iball/hp/dell) , category-4: office/computer stationary & other office items , a3 size 75 gsm (500 sheets per ream) (jk/modi/xerox/tnpl) , a4 size 75 gsm paper (500 sheets per ream) (jk/modi/xerox/tnpl) , a4 size photo paper 180 gsm (50 sheets per pkt) (desmat/novajet/epson/kodak) , address label(for laser printer a-4 size) 100 sheet in a packet (desmat or equivalent)24 label per page , address label(for laser printer a-4 size) 100 sheet in a packet (desmat or equivalent) 16 label per page , all out machine with refill , all out refill , all pin(26 mm, nw 70 gram) , basta (cloth) size 9090 , bell- wired bell (as per sample) , bell- wireless bell (as per sample) , binder clip 19 mm , binder clip 25 mm , binder clip 32 mm , binder clip 41 mm , cell (duracell) pencil cell (aa) , cell (duracell) pencil cell(aaa) , clock- wall clock (ajanta, rikon) , crockery- cup saucer set – (100-150ml) (golden line bone china) (make: bharat/ cello) (set of 6 cup + 6 saucer set) , crockery- cup set- (100-150ml) (golden line bone china) (make: bharat/ cello) (set of 6 cup) , crockery- kettle electric (prestige, borosil, cello, pigeon , milton), 1.5 litre , crockery- serving tray – melamine (31x23)cm , crockery- serving tray – melamine (39x27)cm , crockery- tea coster - melamine (set of 6 pieces) , crockery- tea flask - tuff insulated jug- 1 litres (cello/milton) , crockery- water glass tumbler (borosil/clay craft) medium size, 295ml, plain (set of 6 glass) , crockery- water jug plastic (2 ltr. or more) (poly-propylene plastic) (cello/prestige/orient /milton or equivalent) , dishwash liquid drops (200-250 ml) (vim/pril) , dishwash soap tub 500gm. (vim/pril) , dustbin 15 ltr (poly-propylene plastic) with cover , dustbin min. 12 litr (poly-propylene plastic) with cover , dustbin plastic min 12 litr. (poly-propylene plastic) without cover , dustbin plastic min 8 litr. (poly-propylene plastic) without cover , dustbin plastic min 8 litr. (poly-propylene plastic) without cover , duster (cloth) 2ft x 2ft. , envelope (cloth) a4 size with min. 100 gsm paper (100pieces in one packet) , envelope (cloth) fs size with min. 100 gsm paper (100pieces in one packet) , envelope 11”x5” brown 80 gsm(50 piece) , envelope 9”x4” brown 80 gsm(50 piece) , envelope- best quality white window envelop (50 piece) 11 x 5 80 gsm , eraser- non dust (doms/camlin/natraj/faber castel)(10piece in one packet) , extension board (make: belkin/bajaj/havells/anchor) 4 socket , extension board (make: belkin/bajaj/havells/anchor) 6 socket , extension board (make: belkin/bajaj/havells/anchor) 8 socket , file cover (31 kg cpm board) with printing of deptt name , file cover- index file (box file) , file cover- ring binder, (solo, neelgagan) (best quality) (as per sample) 1,2-d, pvc folder a4 size, holds upto 250 sheets (solo/trio or equivalent) , file folder transparent l-shape (plastic) (solo/trio) a4 size (20 pcs in one pkt) , file folder transparent l-shape(plastic) (solo/trio) fs size (20 pcs in one pkt) , file lace best quality(100 nos. of laces in one bunch) , file pad – weight-32 ons, size-1015,36 (dori 4*27 flap) , file seprater , file tag best quality (50 nos. of laces in one bunch) , forms- fvc bill forms (1000 pieces in one pkt) , fs size 75 gsm green pie paper (500 sheets per ream) (jk/modi/xerox/tnpl) , fs size 75 gsm paper (500 sheets per ream) (jk/modi/xerox/tnpl) , gem clip/u-pin (plastic cover) (50pieces in pkt) , glue stick 15 gm (kores/scotch/fevi-stick) , gum (camlin/kores)150 ml , gum (camlin/kores)700 ml , id card lanyard plain (blue/red/yellow/green) , id card lanyard printed as sample (blue/red) pack of 50pcs , id card pvc card holders (pack of 250pcs) , id card pvc cards packet of 250 pvc cards (30 mil) , marker- paint marker (golden color) (camlin/faber castel/luxor)(10pieces in pkt) , marker- permanent cd or dvd marker (camlin/faber castel/luxor) (10pieces in pkt) , megnatic paper holder (set of 12 pcs in pkt) , name plate (pvc) 1 line , name plate (pvc) 2 line , name plate (pvc) 3 or more line , name plate (wooden) 1 line , name plate (wooden) 2 line , name plate (wooden) 3 or more line , paper cutter- large size (natraj or equivalent brand) , paper sponge , paper weight , pen (black/blue/red/green)- add gel achiever , pen (black/blue/red/green)- cello butter flow , pen (black/blue/red/green)- flair techno gel , pen (black/blue/red/green)- uniball gel impact , pen (black/blue/red/green)- uniball-eye fine , pen- high lighter pen (camlin/faber castel/luxor)(5 pieces in one pkt) , pen refill (black/blue/red/green)-add gel achiever , pen refill (black/blue/red/green)-cello butter flow , pen refill (black/blue/red/green)-flair techno gel , pen refill (black/blue/red/green)-uniball gel impact , pen- white fluid/ correction fluid (camlin/luxor/faber castel/kores/kangaro) , pencil- hb (camlin/natraj/faber castel) (10pieces in pkt) , poker (iron base) , poker (wooden handle) , post-it(3m) size 1” x 3” (3 coloured) 80 sheets each , post-it(3m) size 3” x 3” 100 sheets , punching machine(kangaroo or equivalent brand) 14 page punching capacity (dp 480) , punching machine (kangaroo or equivalent brand) 1 hole punching no. 10 , punching machine (kangaroo or equivalent brand) 22 page punching capacity (dp 680) , punching machine (kangaroo or equivalent brand) 60 page punching capacity (dp 800) , register-issue register(minimum 120 pages) , register- attendance register (minimum 13 pages) , register- attendance register (minimum 26 pages) , register- attendance register (minimum 300 pages) , register- attendance register (minimum 50 pages) , register- attendance register (minimum 80 pages) , register- bill register 160 pages , register- bill register 80 pages , register- cashbook 100 pages , register- challan register (120 pages) , register- dd receipt register (80 pages) , register- dispatch register (minimum 120pages) , register- dispatch register (minimum 300 pages) , register- encashment register 160 pages , register- peon book 100 sheets , register- postage stamp register (400 pages) , register- standard register (minimum 80 pages) , register- stock register (minimum 600 pages) , register- vehicle log book , register- visitor book (minimum 300 pages) , room freshner (200ml) , scale iron (12”) (ajanta/camlin/natraj) , scale plastic (12) (natraj/camlin) , scissors (kangaro munix) stainless steel, 185 mm (munix sl-1173) , sharpener (camlin/natraj/faber castel) (10pieces in one pkt.) , slip pad with doit&c logo 140mm x 225mm, 70 gsm inner paper with line, 1 mm card sheet on back 40 sheets (pages 80) , slip pad with doit&c logo 140mm x 225mm, 70 gsm inner paper with line, 1 mm card sheet on back 80 sheets (pages 160) , spiral slip pad with doit&c logo 140mm x 225mm, 70 gsm, inner paper with line, card sheet on back and front 40 sheets (80 pages) , spiral slip pad with doit&c logo 140mm x 225mm, 70 gsm, inner paper with line, card sheet on back and front 80 sheets (160 pages) , spiral slip pad with doit&c logo 140mm x 225mm, 70 gsm, multi color inner paper with line, card sheet on back and plastic cover 160 sheets (320 pages) , spiral slip pad with doit&c logo 140mm x 225mm, 70 gsm, multi color inner paper with line, card sheet on back and plastic cover 80 sheets (160 pages) , stamp pad 110mm x 70mm (ashoka) , stamp- refillable self inking stamp seal 2 line , stamp- refillable self inking stamp seal 3 line , stamp- refillable self inking stamp seal 4 line , stamp- refillable self inking stamp seal 5 or more line , stamp- sun stamp seal 2 line , stamp- sun stamp seal 3 line , stamp- sun stamp seal 4 line , stamp- sun stamp seal 5 or more line , stapler (kangaroo/max) staples no. 24/6, 26/6, stapling capacity upto 30 pages, loading capacity:50 staples (24/6),100 staples (26/6) (kangroo-hdz-45 equivalent) , stapler (kangaroo/max) staples no. 24/6, 26/6, stapling capacity upto 30 pages, loading capacity:50 staples (24/6),100 staples (26/6) (kangroo-hp-45 equivalent) , stapler (kangaroo/max) staples use :no. 10, stapling capacity upto 15 pages, loading capacity:50 staples , stapler pin (kangaroo/max) no. 10-1m (20x50=1000 staples) , stapler pin (kangaroo/max) no. 24/6 (20x50=1000 staples) , stapler pin (kangaroo/max) no. 26/6 (20x50=1000 staples) , tape- both side (scotch/cello/3m) 1 wide both-side tape thick , tape- both side (scotch/cello/3m) 1 wide both-side tape thin , tape- brown packing (scotch/cello/wonder) 1, 55 meter , tape- brown packing (scotch/cello/wonder) 2, 55 meter , tape- transparent adhesive (scotch/cello/wonder) 2, 55 meter , tape- transparent adhesive scotch/cello/wonder)½, 55 meter , tape-transparent adhesive (scotch/cello/wonder) 1, 55 meter , thumb pin (set of 100 pieces) , tissue box (packet of 100 pieces) , towel 100% cotton, 75 cm x 150 cm (bombay dyeing) , white board duster , white board duster (magnate) , white board marker (camlin/luxor/faber castel/kores) (10pcs in one packet) , category-5: : networking services , cable- cat-6 network cable box 305 mtr. (d-link/digisol/dax/amp/molex) , cable- cat-6 network cable/ ethernet cable (3mtr) (d-link/digisol/dax/amp/molex) , cable- laying of cat 6 cable , casing- isi mark pvc casing 1 inch , casing- laying of pvc casing , i/o port set (network keystone jack, gang box, face plate (d-link/digisol/ dax/amp/molex) , rack- 9 u rack with pdu & cooling fan , rack- installation charges for 9 u rack , rj-45 connector (dlink/digisol/digilink/molex) , switch- 5 port switch 10/100/1000 mbps (d-link/digisol/digilink) , switch- 8 port switch 10/100/1000 mbps (d-link/digisol/digilink )

corporations/Associations/Others

TRN :34411400 | 14 May, 2025

Tender Value : 0

Purulia - West Bengal

Tender for a pilot project on harnessing hydro-electric power by installing low head hydro kinetic turbine system in the condenser cooling water system of 2x600mw subc coal power plants, rtps, dvc .

Central Government And Public Sector

TRN :34412458 | 13 May, 2025

Tender Value : 0

Kalpakkam - Tamil Nadu

Tender for gem bids for facility management services - lumpsum based - industrial; o&m of electrical work testing or calibration of electromechanical relays numerical relays at any power station or substation; consumables to be provided by service provider inclusive in c..

Related Searched Keywords : electric power

List of electric-power Tenders

Tender for gem bids forcalibration services - electrical rf microwave electrotechnical; voltage current power acdc frequency power factor phase angle resistance; nabl labs; buyer premises onsite

Tender for gem bids for custom bid for services - supply installation testing and commissioning of ring main electrical power distribution system western sector at hal township ojhar

Tender for laying of power cable from wbsedcl meter room to chlorine room with some other electrical mountings

Tender for a pilot project on harnessing hydro-electric power by installing low head hydro kinetic turbine system in the condenser cooling water system of 2x600mw subc coal power plants, rtps, dvc .

Tender for gem bids for facility management services - lumpsum based - industrial; o&m of electrical work testing or calibration of electromechanical relays numerical relays at any power station or substation; consumables to be provided by service provider inclusive in c..

Get electric power Tender Alert...

Related Searched Keywords : electric power

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us