Filters

List of engine-meter Tenders

List of latest engine-meter Tenders in Indian Tenders. Click on any engine-meter Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for engine-meter Tenders.

All-Tenders (28)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :35586162 | 20 Oct, 2025

Tender Value : 0

Leh - Ladakh

Tender for gem bids for boq, crank shaft lath work, cyl head valve grinding, cly block sleeve fitting and boring, cr bush fitting, arm assy frt suspension fitting, strut assy frtsuspension fitting, cyl block welding work, camshaft bush fitting, injector unlock, meteringcontrol valve faulty, ecm repair, sensor repair, engine lath work, piston sleeve fitting, cyl headgrinding, valve fitting, glow plug threading

Central Government/Public Sector

TRN :35590139 | 20 Oct, 2025

Tender Value : 0

Amritsar - Punjab

Tender for gem bids for ordinary portland cement 43 grade confirming to is 8112 in 50 kgs hdpe bags make ambuja oblique acc oblique ultratech , single skin insulated false ceiling , crushed stone aggregate 20mm grade confirming to is 383 1970 , exhaust fan 250mm , sand bag , air filter for 30 kva generator set , engine mtg pad for 30 kva generator set , engine sefety display unit for 30 kva generator set , fan belt for 30 kva generator set , frequency meter for 30 kva generator set , fuel pipe line for 30 kva generator set , oil filter for 30 kva generator set , oil prasure gauge for 30 kva generator set , radiator hose pipe for 30 kva generator set , air cleaner assy for 30 kva generator set , exhaust assy for 30 kva generator set , exhaust mounting pad for 30 kva generator set , air assy hose pipe for 30 kva generator set , digital meter for 30 kva generator set , stopper assy for 30 kva generator set , fuel tank cap for 30 kva generator set , fuel filter set 1ltr for 30 kva generator set , rubber hose for radiator for 30 kva generator set , reservier bracket for 30 kva generator set , volt meter for 30 kva generator set , self starter for 30 kva generator set , bty bracket for 30 kva generator set , gcu for 30 kva generator set , door hinges for 30 kva generator set , emergency stopper for 30 kva generator set , over flow pipe for 30 kva generator set , fuel gauge for 30 kva generator set , air filter knob for 30 kva generator set , hour meter for 30 kva generator set , diesel tank cap for 30 kva generator set , radiator upper mounting for 30 kva generator set , amp meter for 30 kva generator set , thermostate valve for 30 kva generator set , hydrolic oil for concrete mixer machine , water pump gauge for 30 kva generator set , silencer muffler for 30 kva generator set , oil sending unit for 30 kva generator set , fuel tank lead for concrete mixer machine , engine oil for concrete mixer machine , tyre with tube for concrete mixer machine , exchaust mounting pad for concrete mixer machine , engine mounting for concrete mixer machine

corporations/Associations/Others

TRN :35571685 | 20 Oct, 2025

Tender Value : 76.23 Lacs

Lucknow - Uttar Pradesh

Tender for gem bids for m and i assistance, calibn pressure gauge, calibn vaccumgauge diff gauge, calibn thermal safety valve, calibn pvpvrv, calibn mass flow meter mfm, cleaning septic tank, hydrotesting fire water hoses, hydrotesting loadingunloading hoses, servicing wcfm, servicing dh hydrant, servicing mefg, servicing foam pourers, servicingsprinklers, servicing strainers size upto 6 dia, servicingstrainers sizes over 6 dia, servicing strainers fire engineheader, servicing pump alignment, servicing gate valvessizes over 3, hiring of jcb hydra, hiring of tractor trolly, additional manpower

Central Government/Public Sector

TRN :35574678 | 29 Oct, 2025

Tender Value : 0

East Khasi Hills - Meghalaya

Tender for gem bids for cctv, 5mp ir network outdoor ptz camera, 5mp irnetwork outdoor bullet camera, harware forvideo management software, video managementsoftware as base software with fail over mode, camera licence for vms and fail over, ai suit enginewith perpetual camera licence, server for ai suitengine, video recording storage, client workstation for control and live view, 11.8 feet x 6.5feet active led with accessories for live view atgdcc, 55 inch led display unit for live view, 24 portlayer 2 gigabit managed poe switch with 4x10g sfpand slot and dual power supply and transreceiver, 8 port layer 2gigabit poe swith with 2x1 g sfp slotand trans receiver, 4 port layer 2gigabit poe swithwith 2x1 g sfp slot industrial grade and transreceiver, 6 core single mode armoured opticlefibre cable, 24 port fibre patch panel liu withaccessories, 12 port fibre patch panel liu withaccessories, 3 meter sc lc opticle fibre patch code, cat 6 4 pair shielded twisted pair cable lszh foroutdoor purpose, cat 6 rj 45 stp connector, 24 ufloor mount network rack at control room, 9 uwall mount network rack, 6 u pole mount rack forout door purpose, galvanised pole 6 mtr forbullet camera, 5 kva online ups with 30 minutesbackup, 3 kva online ups with 30 minutes backup, 1kva online ups with 30 minutes backup, 3 core 2.5mm electrical cable, 63 amp mcb with socket boxfor ups end, 16 amp mcb with socket box for rackend, 50 mm gi conduit for outdoor laying purpose, 25 mm pvc conduit for indoor laying purpose, 50mm high density polyethylene hdpe pipe, out doorcamera box, route marker for ofc, lightening /bid number: gem/2025/b/6683933* /dated: 08-10-2025 & & / bid document1 / 47 & & /item categoryarrester, digging and refilling of hard and softsoil concrete bricks, laying of high densitypolyethylene pipe hdpe underground, laying of giconduit underground, laying of pvc conduit forindoor laying purpose, laying of optical fibrecable through hdpe gi conduit overhead, laying ofcat6 stp through hdpe complete, laying ofelectrical cable throgh hdpe gi conduit overhead, splicing of optical fibre cores, mounting and fixingof gi pole after excavation of saft hard soil, mounting fixing and dressing of lighteningarrestor, mounting and fixing of route marker, mounting fixing and dressing of liu, mountingfixing and dressing of floor standing rack, mounting fixing and dressing of wall mouint rack, mounting fixing and dressing of pole mouint rack, mounting and fixing of all type of cameras, mounting fixing installation and configuration ofall type of workstation, mounting fixinginstallation and configuration of all type ofswitches, mounting fixing installation andconfiguration of active led display, mountingfixing installation and configuration of all type ofstandalone display unit, mounting fixing anddressing of mcb, mounting fixing dressinginstallation and configuration of ups system, mounting fixing dressing installation andconfiguration of server hardware, installationand configuration of video management softwarevms, installation and configuration of ai suitengine, mounting fixing dressing installation andconfiguration of storage hardware, testingcommissioning providing three sets of completiondiagram documentation of entire project andtraining to users //bid details2 / 47

Central Government/Public Sector

TRN :35575799 | 30 Oct, 2025

Tender Value : 0

Medachal - Telangana

Tender for gem bids for upgradation, simatic s7 400h cpu 4 12 5h central processing unit simatic s7 400 power supply ps407 5vdc 10 a communications processor cp 443 1 simatic s7 400 rackur2 central and distributed with 9 slots 2 redundant ps simatic s7 400 h synchornization module v6 for patchcable to 10 m simatic s7 400 patch cable foc 1m forsynchonization module simatic s7 400 backup battery 3point 6v 2 point 3ah simatic s7 400 memory card for s7400 1 mbyte mounting rail 1500mm 59 et 200sp ha simatic et 200sp ha profinet inteerface module im 155 6pn max 56 i o modules simatic et 200sp ha bus adapterba 2xrj45 2rj45 sockets simatic et 200 sp ha carriermodule in redundant carrier 2 fold simatic et 200 sp hadigital input module di 16x24vdc ha simatic et 200 spha terminal block type h1 32 push in terminals simaticet299sp ha digital output module dq16x24vdc 0 5a ha simaticet 200sp ha carrier module 2 fold carrier simaticet 200sp ha analog input module ai 8xu i tc 4xrtd 2 3 4wire ha simaticet 200sp ha analog output analog moduleaq 8xi hart ha et 200sp ha cover industrial ethernettp cord rj45 rj45 tp cord pre assembled with 2 rj45 pluglength 1 m communications processor cp 1623 pciexpress x1 3 3 v 12 v sitop psu100s20a stabilized powersupply sitop pse202u redundancy module input output24v dc 40a simatic step 7 v5 point 7 sp3 upgrade fromv5 point 3 to v5 point 7 floating license simatic step 7 v5point 7 sp3 floating license simatic net softnet ie s7lean v18 hardnet ie s7 redconnect v18 including opcserver and hardnet ie s7 software for fail safe s7communication simatic net hardnet ie s7 v18 sw fors7 simatic step7 professional v20 floating licensedownload engineering work station panel 2000mm h x1200mm plus 800mm w x 500mm d make rittal reputed bid number gem2025b6772373 dated 09-10-2025 bid document1 39 1 1 along with wiring, simatic et 200sp ha analog inputmodule ai 16xtc 8xrtd 2 3 4wire ha, simatic s71500cpu cpu 1511 1 pn, simatic s71500 digital input moduledi 32x24vdc hf, simatic s71500 digital output moduledq 32x24vdc 0 point 5a hf, simatic s71500 digitaloutput module dq 8x24v dc 2a hf, simatic s71500 frontconnector screwtype connection system, simatics7memory cards for s7 1x00 cpu 4mb, simatic s71500mounting rail 482 6mm approx19inch, simatic s71500cmptp rs422 485 hf communication module, simatics71200 communication module cm1241, simatic s71200cpu 1214c compact cpu, industrial ethernet fctp trailingcable 2x2 profinet type c 100 meter length, simatic s71500 mounting rail 160mm approx6 3inch, simatic winccruntime advanced 512 power tags v17 upgrade v11 v16v17, simatic win cc logging for runtime advanced optionfor wincc tia portal license key download, simatic winccadvanced v20 upgrade v11 v19 v20 or v11 v19 combo v20combo engineering software in the tia portal floatinglicense software, simatic step 7 professional v20 comboupgrade v11 v19 v20 or v17 2021 combo v19 2021 sr2combo v20 2021 sr3 combo floating license download, simatic s7-1500 plc cpu 1515 2pn with profinetinterface, simatic et 200sp analog input module ai 4xi2 4wire, simatic et 200sp analog output module aq 4xu i, simatic et 200sp digital input module di16x24v dc, simatic et 200sp digital output module dq16x24vdc 05a, simatic et 200sp analog input module ai 8xrtd tc2 wirehigh feature, simatic et 200sp profinet interfacemodule im155 6pn st, simatic et 200sp bus adapter ba2xrj45 2 rj45 sockets, simatic et 200sp spare part servermodule for et 200sp, simatic et 200sp base unit bu15p16 plus a0 plus 2d bu type a0, scalance xb008unmanaged industrial ethernet switch for 10 100 mbit s, simatic et 200sp base unit bu15 p16 plus a0 plus2b butype a0, simatic wincc professional v20 512 power tagsengineering software in the tia portal, simatic wincc rtprofessional 512 power tags v20 runtime software in tiaportal, installation and commissioning training functionaldemonstration

Central Government / Public Sector

TRN :35577221 | 10 Nov, 2025

Tender Value : 0

Vijayawada - Andhra Pradesh

Tender for supply of led based hour - rpm meter. 4 digit seven segment digital output for rpm; 6 digit seven segment digital output for hour meter; range: 0 to 3000 rpm; input: mpu signal; aux power supply: 18v to 32 v dc; number of teeth: 142. factory programmable; mechanical dimension: bazel: 96 x 96 & panel cut-out: 92 x 92; depth: 85 mm approx. suitable for cil engines. make: twintech/cummins/process care systems/data care system. note: the firms with past performance of the tendered/same items subject to submission of proof of documents such as pos/r note are only eligible..

State Government

TRN :35562144 | 03 Nov, 2025

Tender Value : 0

Raipur - Chhattisgarh

Tender for gem bids for tool, knife double bladed electrician mallet hard wood divider150 mm drill hand brace 0 100mm plane cutters size 50mm smoothing cutters de soldering gun heat proof hand vice 50 mm jaw contactor and auiliary contacts relay a cut out relays 16a 440v relay b reverse current16a 440v relay c over current 16a 440v relay d undervoltage 360v 440v load bank lamp heater type 6 kw 3ph brake test arrangement knife switch dpdt fitted knifeswitch tpdt fitted digital wattmeter solar panel withbattery 18 watt dc compound motor synchronous motor single phase capacitor motor smart meter smart meter3 phase ammeter dc automotive diesel smokemeter cut section of 4 6 cylinder scriber 150 mm dot punch100 mm combination set 300 mm marking table mildsteel universal scribing block v block pair with clamps angle plate taps and dies complete wooden handleforged double ended tubular clamp toolmaker wheeldresser one wing compass power tools different profilegauges knurling tool diamond knurling tool straight knurling tool diagonal inde able boring bar with lappingplate dia 6 drill gauges letter drill gauge a to z drillgauges number drill gauge 1 to 60 drill gauges metric drillgauge trammel 300 mm stake hatchet stake grooving sine bar 125 mm comparators gauge surface roughnesscomparison carbide wear block arm strong type tool arm strong type tool bit holder left hand arm strong typetool bit holder straight carrier for mounting components cut section model for pneumatic components swaging andflooring tool kit network training systemthis trainingsystem should help to understanding of local area networklan radial hand splitter woodturning lathe 6 ac drives files assorted sizes and types scraper half round 25 cm spanner clyburn 15 cm de nibbling tools micrometer bid number gem2025b6751274 dated 07-10-2025 bid document1 108 1 1 seam checking gauge, steamjacket kettle 50 litre doublejacketed with indentin, sulphuring chamber 5 kg capacitymade up of wooden stainless, vacuum bottle fillingmachine capacity, sealer for sealing of jars, perforatedspoons, chisel cold flat, adjustable pipe die set, gaugetelescopic set, interchangeable ratchet socket set, lathetools hss tipped set, drill s s twist block, adjustable pipechain tonge to take pipes up to 300 mm, hand reamer setflute nominal dia 6 8 10 12 16mm, hand shear universal, rheostat sliding type, ammeter mc analog portable, millivoltmeter centre, snip bent heavy duty, ammeter mcanalog, ac ammeter mi, universal puller jaws adjustable, hammer ball peen, straight edge steel, stud e tractor, screw thread micrometer, ac energy meter, hydraulic jack, steel bucket r, dual magnetization, compressor, gaugesnap, gps training platform channel 12 receiver, powerdistribution board, inside calliper, gauge plug single, frequency meter, drill twist straight shank set, drill twisttaper shank set, anvil with stand, flat tongs, lu meter lumeter, steel scale, fruit mill junior model 1 hp motor, chisel cold flat carbon steel, swage block, hammer crosspeen, anemometer, allen key, hammer ball peen, trolleytype portable air compressor, otdr min display, smdsoldering de soldering station, bamboo slicing machine, framimg square 24 steel, chisel cold flat 10 mm, tweezers bend tip, picka e, allen key set he agonal, soldering iron, file flat smooth, scrapper, milli ammeterac, crown corking machine, precision set, sheet metalcutting pliers, dol starter 1 2 hp, scraper triangular 25 cm, steel square, oil stone, prick punch, hand reamersadjustable, spirit level, crimping tool pliers, hammerplastic, plastic feeler gauges, hand hammer, machinereamer parallel, hammer chipping, interchangeable driverset, scraper flat 25 cm, chisel 3 4 18mm, smps ofdifferent make, file half round 20 cm, drill chuck with key, lan tester type, center punch, file square, allen keyalloy steel, tyre pressure gauge, hand drill manualoperated, voltmeter, hand operated crimping, clampmeter 0 10 a, engineer s try square, cylinder liner dry, spanner double ended, chisel firmer, electric rice cooker, file triangular, chisel 1 2, piston ring remover, planishinghammer, blow lamp 1 litre, spirit level metal 300 mmbasic length accuracy 0 1mm meter, lcr meter digital, chisel mason hammer headed punch, spirit level 15 cmmetal, punch letter 4mm, bearing puller inside, bearingpuller outside, d firmer chisel, calipers q4

State Government

TRN :35570192 | 22 Oct, 2025

Tender Value : 0

Udhampur - Jammu And Kashmir

Tender for gem bids for civil, prismatic compass, plane table with accessories, steelballs los angeles abrassion test, vane shear test, pitot tube, mercury, current meter, pycnometer bottle, weights, simple screw jack apparatus, double purchase crab, differential axle and wheel, specific gravity and waterabsorbtion, cube set of six cubes, digital balance, searlsapparatus, portal framed apparatus, flexural strengthmachine, bricks models, models of different types offoundation, various models used in civil engineering works, bod meter, residual chlorine, vicat apparatus

Central Government/Public Sector

TRN :35557423 | 17 Oct, 2025

Tender Value : 0

New Delhi - Delhi

Tender for gem bids for repair and overhauling service - engine stop cable; asper item specification; yes; buyer premises, repair andoverhauling service - spark plug; as per itemspecification; yes; buyer premises, repair andoverhauling service - ignition coil; as per itemspecification; yes; buyer premises, repair andoverhauling service - wiper motor assy; as per itemspecification; yes; buyer premises, repair andoverhauling service - ht lead; as per itemspecification; yes; buyer premises, repair andoverhauling service - master cylinder clutch; as peritem specification; yes; buyer premises, repair andoverhauling service - assy gear shift lever knob lpt2516tc; as per item specification; yes; buyer premises, repair and overhauling service - air pressure pipe; asper item specification; yes; buyer premises, repair andoverhauling service - diaphram; as per itemspecification; yes; buyer premises, repair andoverhauling service - speedo meter cable; as per itemspecification; yes; buyer premises, repair andoverhauling service - starter assy; as per itemspecification; yes; buyer premises, repair andoverhauling service - drive gear speedo cable; as peritem specification; yes; buyer premises, repair andoverhauling service - speedo meter; as per itemspecification; yes; buyer premises

State Government

TRN :35558127 | 16 Oct, 2025

Tender Value : 7.36 Lacs

Jaipur - Rajasthan

Tender for "earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils " p.c.c. in foundation providing and laying in position cement concrete including curing compaction etc. complete in spcified grade excluding the cost of centering and shuttering all work upto plinth level 1:4:8(1 cement:4 coarse sand :8 gradeed stone aggregate 40 mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in cement mortat 1:6 (1-cement: 6- sand) dpc:-providing and laying in position specified grade of cement concrete for all rcc structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required excluding the cost of centering, shuttering and reinforcement . m20 grade nominal mix/design mix. stone masonry in super structurerandom rubble stone masonry with hard stone in superstucture above plinth level and upto five level wall upto 30 cm and less thickness cement sand mortar 1:6 (1-cement: 6- sand) pillar masonary:-random rubble stone masonry with hard stone in superstucture above plinth level and upto five level for square or rectangular pillers cement sand mortar 1:4 (1-cement: 4- sand) supplying and fixing stone lintels/bed plates of approved quarry rough dressed in cement mortar 1:4 :upto 15 cm. thick. " beams:-providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. m20 grade nominal mix / design mix" centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. steel reinforcement:-p/f reinforcement for rcc work including straightening,cutting, bending, placing in position and binding (including cost of binding wire) all complete upto floor five levetmt bars (conforming of relevent is code). door frames:-providing and fixing in cm 1 : 4 double paitam (rebated) stone door window and ventilator frames of approved quarry :size 100 x 75mm. doors:-providing and fixing m.s. sheet 1mm thick double leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint glazed window:providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required :partly fixed and partly openable [ fixed area not to exceed 33%] wire gauge supplying & fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. guard bars: p&f square bars or other flat welded to window/ventilators etc., guard bar 12 x12mm supplying and filling in plinth with sandy soil free from deleterious and organic material under floors including watering ramming consolidating and dressing complete including cost of sandy soil with all lead and lift. stone kharanja: rr dry stone kharanja under floor kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete(for area of each slab upto 2001 sqcm) plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished : 20 mm thick plaster(ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1 cement: 3 fine sand) black board : plaster on new surface on wall in cement sand mortar 1:3 including raking of joints etc. complete fine finish: 12mm thick grading roof for water proofing treatment with water proffing compound: cement concrete 1: 2: 4 (1 cement: 2 course sand: 4 greded stone aggregate 20 mm nominal size) gola providing gola 75mm x 75mm in cement concrete 1:2:4(1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge) including finished with cement mortar 1:3(1 cement: 2 fine sand) as per standard design. "distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: new work (two or more coats) over and including scrapping and priming coat with cement primer." exterior finishing: painting exterior surface of wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including sand papering, prime coat, making smooth surface with cement based putty etc complete in all respect: new work panting on doors & windows :- painting with syntheitic enamel paint of approved brand and manufacture in all shade to give an even shade new steel work (2 or more coat on new work). copping: cement concrete flooring 1:2:4 (1 cement: 2 course sand: 4 greded stone aggregate) finishing with a floating coat of neat cement including cement slurry, making of lines or groove etc. complete but excluding the cost of nosing of steps etc. complete : 40mm thick with 20mm thick nominal size aggregate. making grooves as per design in plaster 10mm to 20mm wide. making of drip course (tapka) in cement sand mortar 1:6 width upto 40 mm and 10 mm thick as per approved design providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete p&f rigid pvc pipe (is:4985 mark) class ii/ (4 kg. /cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110mm dia wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .6a to 32a rating. providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 6.0 sq. mm 4 core providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating p & f isi marked (is:3854) 6 amp. flush type non modular switch with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .

Related Searched Keywords : engine meter

List of engine-meter Tenders

Get engine meter Tender Alert...

Related Searched Keywords : engine meter

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us