Filters

List of flat-repair Tenders

List of latest flat-repair Tenders in Indian Tenders. Click on any flat-repair Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for flat-repair Tenders.

All-Tenders (15)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Government Departments

TRN :49019871 | 21 May, 2025

Tender Value : 8.47 Lacs

Agra - Uttar Pradesh

Tender for tender for repair work of zone-1 ward no. 16 ratanpura nagla vida community hall. - cleaning of the site for warkable etc. all complete. (non scheduled) 2 1:5:10 (1 cement : 5 coarse sand (zone-iii) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) (dsr 2023 sh-4.1.10 ) 3 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in :cement mortar 1:4 (1 cement : 4 coarse sand) (dsr 2023 sh-6.4.1 ) 4 brick work 7 cm thick with common burnt clay f.p.s. (non modular) brick of class designation 7.5 in cement mortar 1:3 (1 cement : 3 coarse sand) in superstructure above plinth level and upto floor five level. (dsr 2023 sh-6.8 ) 5 reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,taircases and spiral stair cases above plinth level up to floor fiveevel, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).(dsr 2023 sh-5.3 ) 6 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. thermo-mechanically treated bars of grade fe-500d or more(dsr 2023 sh-5.22.6) 7 centering and shuttering including strutting, propping etc. and removal of form work for :columns, piers, abutments, pillars, posts and struts(dsr 2023 sh-4.3.3 ) 8 12 mm cement plaster of mix : 1:4(1 cement: 4 fine sand)(dsr 2023 sh-13.1.1 ) 9 structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.(dsr 2023 sh-10.1 ) 10 providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.fire retardant plywood conforming to is: 5509(dsr 2023 sh-9.126.2 ) 11 providing and fixing isi marked is:1341 m.s. pressed butt hinges bright finished with necessary screws etc. complete :)75x47x1.70 mm (dsr 2023 sh-9.55.3 ) 12 providing & fixing decorative high pressure laminated sheet of plain / wood grain in gloss/ matt/ suede finish with high density protective surface layer and reverse side ofdhesive bonding quality conforming to is : 2046 type s including cost of adhesive of approved quality. 1.0 mm thick (dsr 2023 sh-9.127.2 ) 13 distempering with 1st quality acrylic distemper (ready mixed) having voc content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour new work (two or more coats) over and including water thinnable priming coat with cement primer having voc content less than 50 gram/litre (dsr 2023 sh-13.41.1 ) 14 painting steel work with deluxe multi surface paint to give an even shade. two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture(dsr 2023 sh-1021sub head : 13 finishing13.48.3 ) 15 providing & fixing white vitreous china water closet squatting pan (indian type) along with “s” or “p” trap including dismantling of old wc seat and “s” or “p” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of engineer-in charge. long pattern w.c pan of size 580x440 mm (dsr 2023 sh-14.80.1) 16 providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require white vitreous china flat back wash basin size 450x 300 mm with single 15mm c.p. brass(dsr 2023 sh-17.7.7) 17 providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white pvc automatic flushing cistern, with fittings, standard size c.p. brass flush pipe, spreaders with unions and clamps (all in c.p. brass) with waste fitting as per is: 2556, c.i. trap with outlet grating and other couplings in c.p. brass, including painting of fittings and cutting and making good the walls and floors wherever required(dsr 2023 sh-17.5.1 ) 18 providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white p.v.c. automatic flushing cistern, with fittings, standard size g.i./ pvc flush pipe for back and front flush with standard spreader pipes with fittings, g.i clamps and c.p. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required: single squatting plate with 5 litre p.v.c. automatic flushing cistern(dsr 2023 sh-17.6.1 ) 19 providing and laying flamed finish granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer-in-charge :flamed finish granite stone slab jet black, cherry red, elite brown, cat eye or equivalent.(dsr 2023 sh-11.55.1 ) 20 providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to isi : 12701, colour of opaque white or as approved by engineer-in- charge. the rate includes making necessary holes for inlet, outlet & over flow pipes. the base support i/c fittings & fixtures for tank shall be paid separately 21 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized pvc medium well casing (cm) pipe of required dia, conforming to is: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of engineer -in-charge100 mm nominal size dia 22 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized pvc medium well casing (cm) pipe of required dia, conforming to is: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of engineer -in-charge150 mm nominal size dia 23 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply and all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one stepcpvc solvent cement and testing of joints complete as per direction of engineer in charge. internal work - exposed on wall 15 mm nominal dia pipes 24 providing and fixing ptmt bib cock of approved quality and colour.15mm nominal bore, 86 mm long, weighing not less than 88 gms 25 providing and fixing ptmt stop cock of approved quality and colour.15 mm nominal bore, 86 mm long, weighing not less than 88 gms) 26 mirror of superior make glass 60x45 cm 27 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete size of tile 600x600 mm 28 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 29 supply and fixing of light fitting switch board. (none sheduled) 30 supply and fixing wiring of light point. (none sheduled) 31 s/l/j of 20mm dia pvc cunduct pipe etc. all complete. 32 supply & fixing of wiring sub main. 33 supply & fixing of plug point 15mm. 34 lettering & painting of wall etc. all complete. 35 supply & fixing of 27watt. cfl etc. all complete. 36 carriage of materials by manual labour including loading, unloading and stacking for lead less than 01-50 mtrm.207.34+30.42 every 50 additonal meter 37 stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade. 7.38.1 8mm thick (mirror polished and machine cut edge) 7.38.1.1 granite stone of any colour and shade 38 constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast r.c.c. horizontal grating with frame complete as per standard design :with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 39 kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :25 mm thick 40 6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand) 41 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.) 42 stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (to be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :8.14.1 red sand stone - exposed face fine dressed with rough backingt 43 marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :raj nagar plain 44 providing and fixing stainless steel ( grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)(dsr 2023 sh-10.28 ) 45 1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources). (dsr 2023 s h) 46 supply & fixing granite stone work display board (size 2.50ft x 4.00ft) including painting, lettering etc. all complete. (none schedule) 47 sub total 48 add/deduction rs. for estimate figure amount match 49 grand total

Central Government And Public Sector

TRN :49019902 | 27 May, 2025

Tender Value : 0

Lauriya - Bihar

Tender for supply of spares of control valves on door delivery basis including servicing at lauriya plant, west champaran, bihar , supply of spare parts for control valve as per below details: make: ksb-mil sl no. 103684, 38-41412, size: 4”, ansi #2500, cv-35, act size: 18”-8a, tag:06-pcv-504 , gland packing set , body gasket , seat gasket , plug stem assembly (s/a) , seal ring , flat spring , cage , seal ring , yoke gasket , actuator packing , actuator diaphragm , spare parts for control valve as per below details: sl no. 102580, 38-41413, 6”, ansi #2500, cv-95, act size: 18”-8a, tag suv-01 , gland packing set , body gasket , seat gasket , plug stem assembly (s/a) , diffuser seat ring , cage , seal ring , flat spring , yoke gasket , actuator packing , actuator diaphragm , servicing of control valves, which carrying out repair & maintenance activities of the valves, replacement of spares, etc. as per the scope mentioned under the special terms & conditions of the tender.

State Government

TRN :49020032 | 12 May, 2025

Tender Value : 2.11 Lacs

Kozhikode - Kerala

Tender for general-ngo quarters flat a24-urgent special repair work of flat a24 at ngo quarters vellimadukunnu-general civil work

State Government

TRN :49020391 | 20 Jun, 2025

Tender Value : 0

Panaji - Goa

Tender for tender for expression of interest tender for national games sports equipment on rental basis-aquatics sports equipment 2 osb 9 starting platform equipped with false start detection system and early start detecting device with no springing effect having a non slip surface of 0.5 x 0.5 meter backstroke hand grip at 0.6 above water level with complete mounting material ready to use confirming to fina , sfi regulations of make anti / mryta 3 floating goal post as per fina specification of make malmsten / anti 4 anti-wave lanes 50 mts long of make anti / mryt 5 backstroke ledge for start of make finis 6 ball cage for 10 balls of make indian 7 ball releasing mechanism of make indian 8 athletics sports equipment 9 assorted rake (with 1.50m handle) (60cm x 20cm) of make nelco 10 cross bar stands (high jump) to hold 6 cross bars of make nelco 11 cross bar stands (pole vault) to hold 6 cross bars of make nelco 12 cutting player of make indigeneous 13 discus 1 kg steel or brass rim for competition (wa approved) minimum 3 brands of make nelco 14 discus 2 kg steel or brass rim for competition (wa approved) minimum 3 brands of make nelco 15 discus stand (20 discus in one stand) of make nelco 16 folding stool (umpires & lap scorers) of make standard 17 hammer 4.00 kg dia turned brass / iron / alloy for competition (wa approved) minimum 3 brands of make nelco 18 hammer 500 gm ms (for fixing nails) of make standard 19 hammer 7.260 kg dia turned brass/ iron/ alloy for competition (wa approved) minimum 3 brands of make nelco 20 hammer cage with door & net (as per wa rule) of make nelco 21 hammer extra wire and handle - men (wa approved) of make nelco 22 hammer extra wire and handle - women (wa approved) of make nelco 23 hammer stand (12 hammers in one stand) of make nelco 24 high jump fiber cross bar (4m) (wa approved) of make nelco 25 high jump height measuring rod - 0.00m to 2.50mof make nelco 26 high jump landing mattress with cover 6m x 4m x 0.70m of make nelco 27 high jump uprights aluminium telescopic of make nelco 28 hurdles - steeple chase including water jump 1 set (wa approved) of make nelco 29 hurdles automatic aluminium - competition (wa approved)of make ate 30 hurdles carrying trolly (20 hurdles in 1 trolly) of make standard 31 javelin 600 gm. 40m range for competition (wa approved) minimum 2 brandsof make nelco/ate 32 javelin 600 gm. 50m range for competition (wa approved) minimum 2 brandsof make nelco/ate 33 javelin 600 gm. 60m range for competition (wa approved) minimum 2 brands of make nelco/ate 34 javelin 600 gm. 70m range for competition (wa approved) minimum 2 brandsof make nelco/ate 35 javelin 600 gm. non range for competition (wa approved) minimum 2 brandsof make nelco/ate 36 javelin 800 gm. 60 m range for competition (wa approved) minimum 2 brandsof make nelco/ate 37 javelin 800 gm. 70 m range for competition (wa approved) minimum 2 brandsof make nelco/ate 38 javelin 800 gm. 80 m range forcompetition (wa approved) minimum 2 brandsof make nelco/ate 39 javelin 800 gm. 90 m range for competition (wa approved)minimum 2 brands of make nelco/ate 40 javelin 800 gm. non range for competition (wa approved) minimum 2 brandsof make nelco/ate 41 javelin stand (20 javelins in one stand) of make nelco 42 jumping mattress trolly 5m x 3m of make nelco 43 ladder for hammer retriving of make standard 44 pole rack (to hold 10 poles) of make nelco 45 pole vault box of make nelco 46 pole vault crow bar (bar lifter)4.0m long aliminium (telescopic) of make nelco 47 pole vault elastic cross bar of make nelco 48 pole vault fiber cross bar - 4.5m (wa approved) of make nelco 49 pole vault height measuring rod (0.00m to 5.50m) of make nelco 50 pole vault landing mattress (wa approved) of make nelco 51 pole vault uprights (wa approved) with base pair sets of make nelco 52 relay baton different colours with number 1 to 8 aluminium of make nelco 53 shot 4 kg of different dia from 95mm, 100mm, 105mm, 109mm and 110 mm for competition (tuned iron & alloy) minimum 2 brands wa approved of make nelco/ate 54 shot 7.260 kg different dia from 110mm, 115mm, 120mm, 125mm, 129mm, 130mm for competition (turned iron & alloy) minimum 2 brands wa approved of make nelco/ate 55 shot return channel 20m long of make nelco 56 shot stand (20 shots in stand) of make nelco 57 stand with bowl (mgco2/ gym chalk) of make nelco 58 starters stand of make nelco 59 starting blocks combatable with start information syatem wa approved of make nelco 60 starting blocks trolley (10 blocks in one trolly) of make nelco 61 concentric circle of make nelco 62 badminton sports equipment 63 hova courts of make yonex 64 umpire chair of make sanrit 65 basketball sports equipment 66 basketball trolley(to accommodate 15 balls) of make cosco 67 basketball trolley(to accommodate 8 balls) of make cosco 68 billiards & snooker sports equipment 69 sharma s1 snooker tables (12 x 6) with steel cushion long rest half rest spider rest goose neck rest cue extension chalk cues table cover iron ball spotter ball rack table brushes corner brusher of make sharma 70 boxing sports equipment 71 boxing ring (aibaapporved) of make greenhill 72 canoeing & kayaking sports equipment 73 kayak paddle 100% carbon graphite fiber available in ultra-light and stiff variant adjustable clamp on shaft with lock and unlock facility adjustable to 5 cm with a left and right angle protractor icf and ikca approvedof make braca iv 74 canoe paddle 100% carbon graphite fiber available in ultra-light and stiff variant adjustable clamp on shaft with lock and unlock facility adjustable to 5 cm with a left and right angle protractor icf and ikca approved of make braca iv 75 kayak ergometer length: 2.50 m - 3.10 m width: 0.40 m - 0.70 m height: 0.40 m - 0.70 m weight: 40 kg (approximate) povides easily readable, relevant numeric / graphic information to the athlete while training on the ergometer its display shows following updates: paddling time distance speed / power stroke rate / water-air ratio / max heart rate (requires serial interface to polar chest ribbon or similar) average speed / power graphic left / right power balance pacer icf and ikca approved of make dansprint aps 76 canoe ergometer length: 3.10 m - 3.30 m width: 0.40 m - 0.52 m height: 0.60 m - 0.70 m weight: 40 kg (approximate) povides easily readable, relevant numeric / graphic information to the athlete while training on the ergometer its display shows following updates: paddling time distance speed / power stroke rate / water-air ratio / max heart rate (requires serial interface to polar chest ribbon or similar) average speed / power graphic left / right power balance pacer icf and ikca approved of make dansprint aps 77 interval 2000 split / rate watch - stop watch included in the packages: - cr2032 batteries (2) - interval 2000 - interval protective bumper - lanyard memory: 2000 splits, best and average split, 600+ segments identified by date and time, stroke rate w/time unit weight: 2.2 oz (66.369 kg) display dimensions: 1.625 x 1.25 in buoyancy: floats (note: control unit with bumper and lanyard floats) display: high-contrast monochrome lcd backlight: blue/green electroluminescent backlight, auto-on controls: 5 buttons (3 side, 2 front), tactile and audible response. battery type: 2 cr2032 (1 display, 1 backlight) battery life expectancy: 300+ hours case: injection-molded polymer case, acrylic lensof make nielsen & kellerman 78 canoe knee pad made from lightweight and durable closed mini-cell foam that can be shaped for a custom fit and superior comfort icf and ikca approved of make braca iv 79 seats k1 icf and ikca approved of make nelo 80 seats k2 icf and ikca approved of make nelo 81 seats k4 icf and ikca approved of make nelo 82 foot rest k1 icf and ikca approved of make nelo 83 foot rest k2 icf and ikca approved of make nelo 84 foot rest k4 icf and ikca approved of make nelo 85 spare rudder k1 icf and ikca approved of make nelo 86 spare rudder k2 icf and ikca approved of make nelo 87 spare rudder k4 icf and ikca approved of make nelo 88 stop watch electronic with 100 memories included in the packages: - cr2032 batteries (2) - interval 2000 - interval protective bumper - lanyard memory: 2000 splits, best and average split, 600+ segments identified by date and time, stroke rate w/time unit weight: 2.2 oz (66.369 kg) display dimensions: 1.625 x 1.25 in buoyancy: floats (note: control unit with bumper and lanyard floats) display: high-contrast monochrome lcd backlight: blue/green electroluminescent backlight, auto-on controls: 5 buttons (3 side, 2 front), tactile and audible response. battery type: 2 cr2032 (1 display, 1 backlight) battery life expectancy: 300+ hours case: injection-molded polymer case, acrylic lens of make nielsen & kellerman 89 rope garware (in meter) of make nelo 90 balls (big size) of make nelo 91 life jackets ultra low olympic gold medal cut clever figure-hugging shoulder straps integrated side straps 50-70n of gaia environmentally friendly soft foam size available xs (weight: 30-50 kg) sm (weight: 45-70 kg) lxl (weight: 65-90 kg) xxl (weight: 85-110 kg) fl/xl (weight: 60-90 kg) icf and ikca approved of make hiko sports 92 slalom paddles 100% carbon, aluminium & titanium reinforced tips with adjustable shaft upto 5cm of make braca iv 93 spray deck canoe slalom blind stitched and latex sealed seams throughout. 10/11 mm shockcord style deck. 4/5 mm tough faced neoprene with silicone printed reinforcing on top. no seams in the deck section icf and ikca approved of make hiko sports 94 spray deck kayak slalom blind stitched and latex sealed seams throughout. 10/11 mm shockcord style deck. 4/5 mm tough faced neoprene with silicone printed reinforcing on top. no seams in the deck section icf and ikca approved of make hiko sports 95 helmet canoe slalom ultra lightweight competition helmet ideal for whitewater kayak / canoe racing, surf lifesaving, freestyle kayaking and rafting. construction material high impact ralvek thermoplastic for a stiffer, safer shell. the interior is a top grade closed cell eva foam liner. detachable fit pads give you a super comfortable custom fit without abosrbing moisture. low profile shell design foam vent inserts for cold water paddling interior impact liner is a low profileshell design, closed- cell waterproof eva foam weight 500 gms ce-1385 certified and icf approved for international and olympic layak / canoe racing icf and ikca approved of make hiko sports 96 life jackets canoe slalom ultra low olympic gold medal cut clever figure-hugging shoulder straps integrated side straps 50-70n of gaia environmentally friendly soft foam size available xs (weight: 30-50 kg) sm (weight: 45-70 kg) lxl (weight: 65-90 kg) xxl (weight: 85-110 kg) fl/xl (weight: 60-90 kg) icf and ikca approved of make hiko sports 97 jetties for canoe sprint material: high density polyethylene (hdpe), marlex hdpe 50100 / qtr 571 cube dimensions: 500mm x 500mm x 400mm higher holding strength - corrugated design sides to interlock cubes together for higher pressure resistance and strength in water & provision to pass cables or pipes under the cover top cover: separate cover made of marlex hdpe 50100 / qtr 571 with 20mm thick and antiskid design for extra strength & prevent wear & tear lug thickness: 22mm (+-5%)to ensure sufficient strength min. weight of cube with cover 8.5 kgs/cube (+-5%) buoyancy: 360 kgs/sq. mtr flat floor, floor stiffening with painted grip accessories and connectors: made of same hdpe material to avoid any frictional damages complete accessories, short pin, short screw & nuts, cleat, washer, required for constructing floating surface including rope ua radiation proof buoyancy test report qb 1557-1992 diagonal tensile strength test report gb/t 1040.1-2006 compressive strength test: gb/t 8813-2008 supply, installation and handover of project at site hdpe side railing, height 1000mm icf and ikca approved of make indigeous 98 k2 (not more than 18kg) 100% carbon composite construction with no added aramid fiber or glass fiber length: 650 cm weight: not more than18kg icf and ikca approved of make nelo 99 k4 (not more than 30kg) 100% carbon composite construction with no added aramid fiber or glass fiber length: 1100 cm weight: not more than30kg icf and ikca approved of make nelo 100 c1 (not more than 14kg) 100% carbon composite construction with no added aramid fiber or glass fiber length: 520 cm weight: not more than14kg icf and ikca approved of make nelo 101 c2 (not more than 20kg) 100% carbon composite construction with no added aramid fiber or glass fiber length: 650 cm weight: not more than20kg icf and ikca approved of make nelo 102 c4 (not more than 30kg) 100% carbon composite construction with no added aramid fiber or glass fiber length: 900 cm weight: not more than30kg icf and ikca approved of make nelo 103 judo sports equipment 104 judo mats for competition and warm up area (tatami) of make taishan 105 kabaddi sports equipment 106 synthetic kabaddi mats thickness 35-40 mm - total 1500 pieces for 4 courts (2 court for practice and 2 for fop) of make indigeous 107 kho kho sports equipment 108 kho-kho mats (30m x 20m) size:1m x1m . density:30 mm (approved/preferred by kfi) of make gravolite 109 kho-kho poles-sheesham ( height:120-125cms above the ground & 40-50cms below the ground, wooden circumference:9-10 cms at the top & 28.25-31.4 cm at bottom.) colour:white of make shiv naresh 110 mallakhamb sports equipment 111 pole mallakhamb for competition & warm up area above the ground 2600 to 2800 mm, under the ground 800 to 900 mm, neck 180 to 200 mm, top - 70 mm, total length 3400 - 3700 mm, circumference: bottom - 530-550 mm, below the neck 300 to 350 mm, neck 180 to 200 mm, top 350 mmof make kepl khalsa 112 hanging mallakhamb for competition & warm up area height 1700 to 1900 mm, neck height 180 to 200 mm, top height - 70 mm, distance b/w bottom and ground 650-700 mm, circumference: bottom 450 to 500 mm, neck 180 to 200 mm, below the neck 250 to 300 mmof make kepl khalsa 113 structure of hanging mallakhamb for competition & warm up area height of structure/stand - 4600 to 4800 mm, width - 12 feetof make kepl khalsa 114 structure of rope mallakhamb for competition & warm up area height of structure/stand - 5800 to 6000 mm, width - 12 feetof make kepl khalsa 115 powder stand 3 feet with steel tubeof make kepl khalsa 116 rubber foam mattresses for competition and warm up area length - 2 m, width - 1 m, thickness - 6 cm to 10 cmof make kepl khalsa 117 portable mallakhamb above the ground 2600 to 2800 mm, neck 200 mm, top - 70 mm, total length 3400 - 3700 mm, circumference: bottom - 530-550 mm, below the neck 300 to 350 mm, neck 180 to 200 mm, top 350 mmof make kepl khalsa 118 modern pentathlon 119 uipm laser pistols (shooting) (model - pp320exp laser pistol set)of make ecoaims 120 uipm laser target (shooting) (model - lt600 laser hit / miss target) of make ecoaims 121 fencing piste of make absolute fencing 122 fencing apparatus of make absolute fencing 123 pencak silat sports equipment 124 arena mattress (5 cm)(1 set of 92 green, 2 yellow, 3 red, 3 blue)of make indigenous 125 roll ball sports equipment 126 goalpost (size & design as per irbf guidelines) of make indigenous 127 rowing sports equipment 128 single scull boat imported (coastal boats) of make swift racing 129 double scull boat imported (coastal boats) of make swift racing 130 4 seat catamaran importedof make swift racing 131 catamaran obm 4 stroke 25hp of make rowing solutions 132 rugby sports equipment 133 rugby specific goal posts (set of 2 goal posts) 6 inch diameter, 20m height x 4 poles & 4 inch diameter, 6m height x 2 poles of make scrum 134 sqay martial arts sports equipment 135 arena of size 10 x 10 women (sqay arena mats) yellow & purple colour mats (total 100 pieces) of make haily 136 arena of size 12 x 12 men (sqay arena mats) yellow & purple colour mats (total 144 pieces)of make haily 137 table tennis sports equipment 138 table tennis tables - show court- black of make cosco 139 umpires tables of make cosco 140 taekwondo sports equipment 141 taekwondo mats (red & blue colour, 1m x 1m x 24mm thick, daedo or kwon or any wt approved mats) of make indigeous 142 weightlifting sports equipment 143 men bar with collar (warm up & training area) of make eleiko 144 women bar with collar (warm up & training area)of make eleiko 145 discs & plates (fop main stage) (1 set disc & plates in fop (main stage) will consist of 25 kg x 4, 20 kg x 2, 15 kg x 2, 10 kg x 2, 5 kg x 2, 2.5 kg x 2, 2 kg x 2, 1.5 kg x 2, 1 kg x 2, 0.5 kg x 2) of make eleiko 146 discs & plates (warm up & training area) (16 sets disc & plates inwarmup & training area will consist of 25 kg x 2, 20 kg x 2, 15 kg x 2, 10 kg x 2, 5 kg x 2, 2.5 kg x 2, 2 kg x 2, 1.5 kg x 2, 1 kg x 2, 0.5 kg x 2)of make eleiko 147 discs racks (warm up & training area)of make eleiko 148 powder standof make eleiko 149 resin trayof make eleiko 150 warmup & training platform(3 mts. x 3mts.)of make eleiko 151 wrestling sports equipment 152 wrestling mats of make taishan 153 wushu sports equipment 154 taolu arena of make taishan 155 for warm up area - kabaddi mats thickness 35mm,1m x 1m of make rxn 156 sanda arena of make taishan 157 for warm up area - judo mats thickness 40mm, 2m x 1m of make rxn 158 yachting sports equipment 159 rescue boats 4.5 meter rib (rigid inflatable boat), with 2000mm beam, 350mm draft (including appendages), 450mm dia. hypalon coated fabric collars of 1500gsm, 1670dtex material, with 5 airtight compartments, fitted with 40hp 4-stroke obm with manual tiller steering handle and capacity of 6 people. fuel capacity of 2 external tanks of 23-liter capacity each per boat cruising speed of 16 to 18 knots. the boat should be unsinkable when flooded and fully loaded and highly maneuverable, suiting rescue operations in seas.boat to be supplied with irs class certificate. accessories to be provided: 1no. boat repair kit, anchor with rope, 2 paddles, 1 set lifting slings. 1 bollard and 2 fairleads of make chougule fiberglass 160 jury boat 4700 mm long rib (rigid inflatable boat) with fiberglass hull, breadth of 2000mm, max draft of 450mm (including appendages), with 460mm dia. hypalon coated fabric of 1500gsm, 1670dtex, having 5 nos.foam-filled compartments, with single 60 hp 4-stroke obm fitted with remote control and steering system on a center console unit. fuel capacity of 2 external tanks of 23-liter capacity each per boat. cursing speed of 18-20 knot and a capacity of 6-8 people. the boat should be unsinkable when flooded and fully loaded and highly maneuverable.boat to be supplied with irs class certification. accessories to be provided: 1no. boat repair kit, anchor with rope, 2 paddles, 1 set lifting slings. 1 bollard and 2 fairleads of make chougule fiberglass

Government Departments

TRN :49021435 | 19 May, 2025

Tender Value : 0

Dhanbad - Jharkhand

Tender for bill of quantity for expression of interest (eoi) are invited for operation and comprehensive maintenance work of all electrical installation like dg, ac, high mast lights and other electrical equipments (except street lighting system) for a period of 3 years under dmc dhanbad-cost of labour for two year (supervisor (diploma holder) - 1 per day, electrician grade - i- 2 per day, helper - 2 per day ) 2 supply of s.p 5/6 a, one way modular switch 3 supply of 15/16 a one way modular switch 4 supply of 5 pin 5/6 a, modular sockt outlet 5 supply of 15/16 a modular sockt outlet 6 supply of electronic step fan regulator, delux 7 supply of modular gi box for 2 module 8 supply of modular gi box for 4 module 9 supply of modular gi box for 6 module 10 supply of modular gi box for 8 module 11 supply of modular base & cover plate for 2 module 12 supply of modular base & cover plate for 4 module 13 supply of modular base & cover plate for 6 module 14 supply of modular base & cover plate for 8 module 15 supply of 9/10w led bulb 16 supply of 15/16 w led bulb 17 supply of 20/22w led batten 18 supply of ceiling fan 1200mm bldc 5 star is-374:2019 19 pedestal fan with adjustable height, inbuild speed regulator, 560mm 20 supply of recess mountain led round down light (6/7w) 21 supply of recess mountain led round down light (12w) 22 supply of recess mountain led round down light (15/16 w) 23 supply of recess mountain led round down light (18/20w) 24 supply of recess mountain led square down light (6/7w) 25 supply of recess mountain led square down light (12w) 26 supply of recess mountain led square down light (15/16 w) 27 supply of recess mountain led square down light (18/20w) 28 supply of capacitor 2.5 mfdfor fans 29 supply of 100 ah flat type lead acid battry with 24 month replacement guaranty 30 supply of 200 ah tubular type lead acid battry with 36 month replacement guaranty 31 supply of 42 ah sealed maintenance free (smf) battry with 24 month replacement guaranty 32 5 kva online ups single phase input and single phase output power system of input voltage range 110v ac ± 5% - 300v ac ± 5%, frequency range 40 hz - 60 hz, power factor = 0.90 @ full load, and output voltage range 200/208/220/230/240v ac, voltage regulation ± 1%, frequencyrange 50hz ± 0.25hz or 60hz ± 0.30hz harmonic distortion - < 2% thd(linear load): 4% thd(non-linear load) efficiency - 88/83% 33 10 kva online ups single phase input and single phase output power system of input voltage range 110v ac ± 5% - 300v ac ± 5%, frequency range 40 hz - 60 hz, power factor = 0.90 @ full load, and output voltage range 200/208/220/230/240v ac, voltage regulation ± 1%, frequencyrange 50hz ± 0.25hz or 60hz ± 0.30hz harmonic distortion - < 2% thd(linear load): 4% thd(non-linear load) efficiency - 88/83% 34 servicing of 5 kva online ups single phase input and single phase output 35 servicing 10 kva online ups single phase input and single phase output 36 supply of 3 core 2.5 sqmm cu submersible flat cable 37 supply of 20a, 230v,industrial socket outlet 38 supply of capacitor 50 mfd 39 supply of capacitor 120/150 mfd 40 supply of capacitor 200/250 mfd 41 hand tool set kit 42 extension box 43 auxiliary contactor (2no + 2nc) of following rating 32a 44 starter repairing and maintenance 45 6 pin 15/16 amps switch socket combined piano type 46 batten/ angle holder 47 supply of 240 w led driver for street light (high mast light) 48 supply of 240w pcb for street light (high mast light) 49 6mm dia stainless steel wire rope of breaking load capacity 2350kgx2 for 20 meter high mast 50 epr insulated / pvc sheathed copper conductor trailing cable 5cx2.5 sqmm for high mast 51 outdoor stand mounted feeder panel with32a tpn and mcb incommer, 45a tp contactor, automatic switing of luminaries, power tool copntrol incommer out going terminal etc. as required for high mast 52 installation of all above items i.e.including crane as required (high mast light) 53 servicing of 10 kva dg set including lube oil, coolen and filter as required 54 servicing of 15 kva dg set including lube oil, coolen and filter as required 55 servicing of 25 kva dg set including lube oil, coolen and filter as required 56 servicing of 82.5 kva dg set including lube oil, coolen and filter as required 57 servicing of 250 kva dg set including lube oil, coolen and filter as required 58 panel box maintenance 10/ 15/ 25 kva dg set 59 panel box maintenance 82.5 kva dg set 60 panel box maintenance 250 kva dg set 61 servicing of 1.5 ton ac 62 servicing of2 ton ac 63 gas filling for 1.5 ton ac 64 gas filling for 2 ton ac 65 indoor fan motor ac-dc 66 outdoor fan motor 67 running capacitor 68 condensor outdoor 69 communication valve 70 ac pc 71 compressor 72 communication pipe copper 73 add 18 % gst ( in basic rate must fill 18) 74 add 1 % labour cess ( in basic rate must fill 1)

Government Departments

TRN :49021952 | 15 May, 2025

Tender Value : 0

Rajnandgaon - Chhattisgarh

Tender for nit-60 defect liability works under mmgsvy pkg.no. mmgsy-bmr-dlp-01 in dist. bemetara-cutting of branches of trees shrubs and trimming of grass and weeds. trimming of grass and weeds from the shoulders/berms and disposing off the same to suitable locations as per technical specifications clause 1914 restoration of rain cuts restoration of rain cuts with soil, moorum gravel or a mixture of these, clearing the loose soil, benching for 300mm width laying fresh material in layers not exceeding 250 mm and compaction with plate compactor or power rammer to restore the original alignment, level and slopes as per drawings and technical specifications clause 1902 maintenance of shoulder (filling with fresh selected material)making up loss of material/irregularities on shoulders to the design level by adding fresh approved selected material and compacting it with appropriate equipment at omc upto a lead of 1000 m as per technical specification clause 1903 maintenance of shoulder (filling with fresh selected material)making up loss of material/irregularities on shoulders to the design level by adding fresh approved selected material and compacting it with appropriate equipment at omc upto a lead of 1000 m as per technical specification clause 1903 maintenance of wbm road including filling up of pot holes, ruts and rectifying corrugated surface, damaged edges and raveling as per technical specification clause 1906. prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per technical specification clause 502 tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503. 20mm thick open-graded premix carpet using bituminous (vg/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of aggregate 13.2mm size (passing 22.4mm size sieve & retained on 11.2mm sieve and 11.2mm size (passing 13.2mm sieve and retained on 5.6mm sieve) either using penetration grade/ vg bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per technical specification clause 508., viscocity grade (vg) bitumen specification as per is 73:2006 seal coat providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per technical specification clause 510, viscocity grade (vg) bitumen specification as per is 73:2006 maintenance of road signs maintenance of road signs by way of cleaning and repainting of mandatory/ requlatory / cautionary/ informatory and place identifications sign board as perdrawing and technical specification clause 1910. providing and fixing of typical pmgsy informatory sign board with logo as per mord specifications and drawing. three ms plates of 1.6 mm thick, top and middle plate duly welded with ms flat iron 25mm x 5m size on back on edges. the lower plate will be welded with ms angle iron frame of 25mm x 25mm x 5mm. the angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 swg sheet tubes posts duly embedded in cement concrete m-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. the top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 swg steel plate tube. all m.s. will be stove enameled on both sides. lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. all sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing clause 1701 and annexure 1700.1 cautionary, mandatory, informatory direction and place identification sign boards.semi-reflective traffic signs upto 0.90 sqmdirection and place identification signs up to 0.9 sqm size boardproviding and erecting direction and place identifications of semi reflective sign boards as per irc:67 made of 2 mm thick m.s. sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70 mm width and required message, letters, figures with reflective engineering grade tape as per mord specifications of required shade and colour. supported and welded on 47 mm x 47mm of 12 swg square tube of 3050 mm height duly strengthened by 25 mm x 5 mm m/s flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with m-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and technical specification clause 1701 reinforced cement concrete m15 grade kilometre stone/local stone of standard design as per irc:8 fixing in position including painting and printing, etc as per drawing and technical specification clause 1703 5th kilometre stone (precast) ordinary kilometer stone (precast) 200 m stone (precast) maintenance of culverts maintenance of hume pipe culvert by way of clearing, cleaning,erosion repair, repairs to cracks, parapet wall and protection work as per drawing and technical specification clause 1908. maintenance of culverts slab type maintenance of slab type culverts by way of clearing, cleaning,erosion repair, repairs to cracks, parapet wall and protection work as per drawing and technical specification clause 1908. white washing two coats on parapet walls of cd and tree trunks including preparation of surface by cleaning scraping etc. as per technical specifications clause 1915 backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification clause 1204.3.8i. granular material

Central Government/Public Sector

TRN :49022219 | 09 May, 2025

Tender Value : 23.36 Lacs

New Delhi - Delhi

Tender for annual repair and maintenance of to mps flats/bungalows under sub div-ii of pawd-i dg.2025-26 (sh: repair of water proofing treatment works in bungalow no.c-1/15, c-1/17 pandara park and other bungalows)

Central Government/Public Sector

TRN :49022231 | 09 May, 2025

Tender Value : 21.93 Lacs

New Delhi - Delhi

Tender for annual repair and maintenance of to mps flats/bungalows under sub div-i of pawd-i dg.2025-26 (sh: repair of water proofing work at various bungalow)

State Government

TRN :49022392 | 13 May, 2025

Tender Value : 31.44 Lacs

Gangapur - Maharashtra

Tender for providing electrical installation in, premises street light, water pump and fire extinguisher for the newly constructed zilla parishad primary health center (p .h .c)main building (g.f+f.f) [under scheme d.p.c. (general) year 2022-23, 34512595 construction expantion & m/ce & repairs of p.h.c/ phsc) at village,lasur stationtq. gangapurdist. chhatrapati sambhajinagar.= 1 supplying and erecting 25 mm dia. corrugated flexiblepolypropyleneconduit 2 supplying anderectingpvctrunking (pvccasing-n-capping)ofsize25 mm with accessorieson wall/ceiling as per specification no: wg-ma/con. 3 supplying anderectingpvctrunking (pvc casing-n-capping)ofsize20 mm with accessorieson wall/ceiling as per specification no: wg-ma/con. 4 supplying anderectingpvctrunking (pvccasing-n-capping)ofsize32 mm with accessorieson wall/ceiling as per specification no: wg-ma/con. 5 supplying anderectingpvctrunking (pvccasing-n-capping)ofsize40 mm with accessorieson wall/ceiling as per specification no: wg-ma/con. 6 supplying and erecting mains with 2x1.5 sq.mm frlshcopperpvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no: wg-ma/bw 7 supplying and erecting green earth wire 1x1.5 sq.mm frlshcopperpvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no: wg-ma/bw 8 supplying and erecting mains with 2x2.5 sq.mmfrlsh copper pvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no: wg-ma/bw 9 supplying and erecting green earth wire 1x2.5 sq.mmfrlsh copper pvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no: wg-ma/bw 10 supplying and erecting mains with 4x2.5 sq.mmfrlsh copper pvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no: wg-ma/bw 11 supplying and erecting mains with 2x4 sq.mm frlsh copper pvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no: wg-ma/bw 12 supplying and erecting mains with 4x4 sq.mm frlsh copper pvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no: wg-ma/bw 13 supplying and erecting green earth wire 1x4 sq.mm frlsh copper pvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no: wg-ma/bw 14 supplying and erecting mains with 4x6 sq.mm frlsh copper pvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no: wg-ma/bw 15 supplying and erecting pvc insulated pvc round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi strandedcopper industrial cable for voltage grade up to 1.1 kv 16 supplying and erecting pvc insulated pvc round sheathed 2.5 sq.mm (50 no. x 0.25 mm dia.) 3 core flexible multi strandedcopper industrial cable for voltage grade up to 1.1 kv 17 supplying and erectingceiling rose / batten holder / slanting holder / hanging cord switch / hanging bell push / pendant holder bakelite base 6a. erected on filled polypropylene board or polished double wooden block/ pvc junction box. 18 supplying and erectingmodular type switch 6a / 10a duly erected on provided plate and box with wiring connections complete. 19 supplying and erectingmodular type switch 16aduly erected on provided plate and box with wiring connections complete. 20 supplying and erectingmodular type bell-push with indicator 2 modules 6a / 10a, duly erected on provided plate and box with wiring connections complete. 21 supplying and erectingmodular type 3 pin 6amultisocket with safety shutter, duly erected on provided plate and box with wiring connections complete. 22 supplying and erectingmodular type 3 pin 6 / 16amultisocket with safety shutter,duly erected on provided plate and box with wiring connections complete. 23 supplying and erectingmodular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. 24 supplying and erecting modular type blanking plate one module, duly erected on provided plate & box. 25 supplying and erecting pvc surface modular switch box with double mounting plate for 2module duly erected. 26 supplying and erecting pvc surface modular switch box with double mounting plate for 3module duly erected. 27 supplying and erecting pvc surface modular switch box with double mounting plate for 6module duly erected. 28 supplying and erecting pvc surface modular switch box with double mounting plate for 12module duly erected. 29 supplying and erecting 16 / 20 / 25 a starter (modular range) 2 module for ac unit on provided box complete & duly concealed with necessary material and connected. 30 point wiring for light/bell/exhaust fan in pvc trunking (casing-capping) with 1.5 sq.mm (2+1e) frlsh grade copper wire, modular type switch, earthingand required accessories as per specification no: wg-pw/sw 31 point wiring for ceiling fan in pvc trunking (casing-capping) with 1.5 sq.mm (2+1e) frlsh grade copper wire, modular type switch, earthingand required accessories as per specification no: wg-pw/sw 32 wiring for plug on board withswitch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification no: wg-pw/cw 33 supplying and erectingled square / circular max. 11 w down lighter/panel light having pressure die-cast aluminium housing,polystyrene diffuser havingsystem lumens output of min. 1200 lumens, min. efficacy of 110 lumen/w, cri>80, cct upto 6500k, beam angle of 120 deg., max. ripple of 5%,thd<10%, p.f. >0.95, operating range of120-270v, surge protection of 2.5 kv, life class of 50,000 hrs. at l70b50,including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. 34 supplying and erectingled square / circular max. 14 w down lighter/panel light having pressure die-cast aluminium housing,polystyrene diffuser havingsystem lumens output of min. 1500 lumens, min. efficacy of 110 lumen/w, cri>80, cct upto 6500k, beam angle of 120 deg., max. ripple of 5%,thd<10%, p.f. >0.95, operating range of120-270v, surge protection of 2.5 kv, life class of 50,000 hrs. at l70b50,including driver,having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. 35 supplying and erectingled square / circular max. 18 w down lighter/ panel light having pressure die-cast aluminium housing,polystyrene diffuser having system lumens output of min. 2000 lumens, min. efficacy of 110 lumen/w, cri>80, cct upto 6500k, beam angle of 120 deg., max. ripple of 5%,thd<10%, p.f. >0.95, operating range of120-270v, surge protection of 2.5 kv, life class of 50,000 hrs. at l70b50, including driver,having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. 36 supplying and erectingledpanel light(600mm x 600mm) max. 30 whaving crca powder coated housing,polystyrene diffuser havingsystem lumens output of min. 3600 lumens, min. efficacy of 120 lumen/w, cri>80, cct upto 6500k, beam angle of 120 deg., max. ripple of 5%,thd<10%, p.f. >0.95, operating range of120-270v, surge protection of 2.5 kv, life class of 50,000 hrs. at l70b50including driver,having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. 37 supplying and erecting anodized aluminium corridor / passage / mirror light led fitting (2 feet) max. 12wwith high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/w, cri>80, cct upto 6000k, beam angle of 110 deg., ripple<5%,thd<10%,p.f. >0.95, operating range of200-270v, surge protection of 2 kv, life class of 50,000 hrs. at l70b50, including driver with end caps on provided pvc block / wooden board with 3 years warranty. 38 supplying & erecting inverter led batten 10w tube light fitting with polycarbonate housing, heat sink, integrated hf electronic driver, min. 2600 mah lithium ion battery with charging time of 8-10 hours and backup time of min. 3 hrs. with minimum 25% of initial watts having luminous efficacy of 100 lumen/watt,cri>80, cct of 6500k and thd<=20% havinguseful life of minimum 25000 hrs. with overheating protection with 2 years warranty. 39 supplying & erecting inverter led batten 20w tube light fitting with polycarbonate housing, heat sink, integrated hf electronic driver, min. 2600 mah lithium ion battery with charging time of 8-10 hours and backup time of min. 3 hrs. with minimum 25% of initial watts having luminous efficacy of 100 lumen/watt,cri>80, cct of 6500k and thd<=20% havinguseful life of minimum 25000 hrs. with overheating protection with 2 years warranty. 40 supplying and erecting ding dong / electronic musical type call bell with heavy duty coilsuitable to operate on 230v a.c. supply erected on polished double wooden block/sunmica block of suitable size. 41 supplying and erecting integrated led street light fitting26 to 30w ip65 & ik08 class having single piece pressure die-cast aluminium housing ,having system lumens output of min. 2600 lumens, min. efficacy of 100 lumen/w, cri>70, cct upto 6500k, thd<10%, p.f. >0.95, operating range of140-270v, inbuilt surge protection of 10 kv, life class of 50,000 hrs. at l70b50,including driver complete with 3 years warranty as per specification nofg-odf/fls2. 42 supplying and erecting integrated led street light fitting 40 to 50w ip65 & ik08 class having single piece pressure die-cast aluminium housing,havingsystem lumens output of min. 4400 lumens, min. efficacy of 110 lumen/w, cri>70, cct upto 6500k,thd<10%, p.f. >0.95, operating range of140-270v, inbuilt surge protection of 10 kv, life class of 50,000 hrs. at l70b50, including driver complete with 3 years warranty as per specification nofg-odf/fls2. 43 supplying and erecting integratedled street light fitting 100-110w ip65 & ik08 class having single piece pressure die-cast aluminium housing,havingsystem lumens output of min. 11000 lumens, min. efficacy of 110 lumen/w, cri>70, cct upto 6500k, thd<10%, p.f. >0.95, operating range of140-270v, inbuilt surge protection of 10 kv, life class of 50,000 hrs. at l70b50,including driver complete with 3 years warranty as per specification nofg-odf/fls2. 44 supplying & erecting integral post top lantern fixtures (mushroom type) suitable for led lamp upto 12 w consisting of clear acrylic top cover, cast aluminium pole cap complete with accessories on provided pole /bracket as per specification no. fg-odf/ptl 45 supplying and erecting street light wall bracket made from 40 mm. dia ‘ g.i. pipe 1.2 m. in total length complete as per specification no. fg-bkt/wb 46 supplying & erecting 3w, 230v integral type led lamp suitable for b-22 / e-27 base.(night lamp) 47 supplying and erecting regular/ standard model ceiling fan of 900 /1050 mm. sweep complete erected in position as per specification no. fg-fn/cf 48 supplying and erecting bracket fan 400 mm. sweep a. c. 230 volts 50 cycles 1350 rpm. oscillating type, plastic or metal blades chrome plated guard with speed regulator and moisture proof treatment to winding and with ‘e’ class insulation. 49 supplying and erecting fresh air cum exhaust fan of light duty 250 v a.c. 50 cycles 300mm. 1400 rpm rust proof body & blades, wire mesh, duly erected, complete. 50 supplying and erecting exhaust fan heavy duty 230 v a.c. 50 cycles 375/380 mm. 1400 rpm complete erected in position as per specification no. fg-fn/exf 51 supplying and erectingenergy saving ceiling fan 230 v a.c. 50 cycles 1200 mm complete erected in position as per specification no. fg-fn/cf 52 supplying and erecting fan hook of 10 mm. m.s. round bar grouted in rcc slab with making the site as original. 53 providing recess in brick wall suitable for erection of exhaust fan up to 450mm. sweep complete with grouting of nut, bolts, plastering and colour washing to match the colour of the wall for the wall thickness of 225 mm. 54 supplying & erecting 22 swg g.i sheet metal cawl sector shaped with 25 x 25 x 3 (mm) angle iron frame, metal mesh to avoid birds entry with necessary material, suitable for exhaust fan of 400 mm as per specification no fg-fas/msc 55 supplying and erecting midget type 3.0 litres instant type water heater of rustproof & shockproof abs plastic body, high grade ss inner tank & 3kw heating element with corrosion & hard water protection, with minimum 3 safety protections (i.e. thermostat & thermalcut-out, function valve) complete with 6.5 bar pressure withstanding capacity 230/250v, 50hz, a.c. supply with inlet and outlet, with 3 core pvc flexible copper wire leads duly tested and marking sr. no. and date of erection complete. 56 supplying and erecting chromium plated heavy duty brass stop cock for inlet pipe of water heater (15mm. dia). 57 supplying & erecting 15mm brass non return valve for inlet pipe of storage water heater. 58 providing fiber reinforced pvc flexible pipe upto 1m length with brass locking nuts and washers and clips at both ends suitable for hot water and cold water both (1 set of 2 nos.) complete. 59 supplying, installing, testing & commissioning split type variable speed invertertechnology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.3tr to 1.6tr capacity having iseer minimum 3.8 to maximum 4.39 suitable to operate on 250v, 50 hz, a.c. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant r32 having copper condenser, minimum 2.5pm filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dba at position as per specification no. apac/ wac 60 supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.7tr to 2.0tr capacity having iseer minimum 3.8 to maximum 4.39 suitable to operate on 250v, 50 hz, a.c. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant r32 having copper condenser, minimum 2.5pm filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dba at position as per specification no. apac/ wac 61 supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with rohs compliant suitable for refrigerant having 22swg thickness and inner dia/size 12mm complete. 62 supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with rohs compliant suitable for refrigeranthaving 22swg thickness and inner dia/size 16mm complete. 63 supplying, erecting, testing and commissioning self contained water cooler 230/250v 50hz nominal cooling capacity of 80 litres per hour and storage capacity 120 litres with partially stainless steel body as per specification no. ap-wcr/wc 64 supplying, erecting, testing and commissioning self contained water cooler 230/250v 50hz nominal cooling capacity of 150 litres per hour and storage capacity 150 litres with partially stainless steel body as per specification no. ap-wcr/wc 65 supplying and erecting ultra violet storage type water purifier (ro+uv+uf) with softener for safe drinking water consisting of uv germicidal tube of 8w capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230v, single phase a.c. supply with uv fail & filter change indication system .(for tds more than 200) 66 supplying, installing, testing and commissioning of single phase, 230v, 50 hz, 1400 to 1600va digital pure sine waveinverter with backup time of ........ hrs. based on insulated gate bipolar transistor (igbt) technology completeas per specification no.ap-inv 67 supplying and erecting 12v/180ah tubular battery with battery terminal wire, duly charged with 36 months warranty complete 68 supplying and erecting fully automatic line voltage stabilizer buck and boost type for operation on input voltage 160-270v and output voltage 200-250v rated for 3kva maximum load and with voltmeter, selector switch, 6a/16a flush type 3 pin socket for output and with 3 core copper flexible cord and 3 pin 6/16a plug top with overload & short circuit protection complete. 69 supplying and erecting switch disconnector fuse (sdf) switch 415v, 100a,open execution, four poleac23 a rated with terminal shrouds on both sides and phase barriers along with telescopic shaft for depth adjustments and door interlock and padlock complying to is/iec 60947-3 part-1/3hrc - din type fuse, insulation voltage 1000 vfor enclosing in panel with rotary handle for on / off operation (without hrc fuse) 70 supplying & erecting three phase, 415v, street light control panel up to the max load of 6kw, tpn mcb 40a,powder coated crca 14 swg sheet, outdoor type, having ip54,ik10 protection, suitable rating contactor, 24 hrs. astronomical time switch with minimum 5 years battery back up,auto/manual selector switch, on/off push buttons, indicator lamps, control wiring, metering device, etc. for automatic operation, with overcurrent, short circuit, earth fault protectionon provided iron frame / cc foundation. 71 supplying, erecting & marking spmcb 0.5a to 5a, c-series with rated short - circuit breaking capacity (icn) 10kain provided distribution board as per specification no. sw-swr/mcb 72 supplying, erecting & marking spmcb 6a to 32a, c-serieswith rated short - circuit breaking capacity (icn) 10ka in provided distribution board as per specification no. sw-swr/mcb 73 supplying, erecting & marking spmcb 6a to 32a, b-series with rated short - circuit breaking capacity (icn) 10ka in provided distribution board as per specification no. sw-swr/mcb 74 supplying, erecting & marking dpmcb 6 a to 32 a, b-series with rated short - circuit breaking capacity (icn) 10ka in provided distribution board as per specification no. sw-swr/mcb 75 supplying, erecting & marking tpmcb 6a to 32a, with rated short - circuit breaking capacity (icn) 10ka in provided distribution board as per specification no. sw-swr/mcb 76 supplying, erecting & marking tpmcb 40a to 63a, with rated short - circuit breaking capacity (icn) 10ka in provided distribution board as per specification no. sw-swr/mcb 77 supplying, erectingand marking double pole isolator only switch version of miniature circuit breakerof40awith required wiring connections and lugs etc. in provided distribution board. 78 supplying, erecting and markingfour pole isolators only switch version of miniature circuit breakers of 40a in provided distribution board. 79 supplying, erecting and markingfour pole isolators only switch version of miniature circuit breakers of 63ain provided distribution board. 80 supplying&erectingtriplepole and neutral distribution board (tpndb), sp/tp mcbs total 4 ways /12 poles, with door, 1.2mm thickness surface/flushmounted, ip 43 protection on iron/gi frame (vertical busbar type) as per specification no. sw-swr/mcbdb 81 supplyingand erecting single pole and neutral distributionboard (spndb), with 2 ways for incoming and 6 ways (6 poles) for outgoing sp mcbs, with door, 1.2mm thickness surface / flush mounted, ip 43 protection on iron / gi frame as per specification no. sw-swr/mcbdb 82 supplying & erecting crca sheet metal one way enclosures of 1.2mm thickness suitable for dp mcb /tp mcb/fp mcb/rccb/rcbo complete erected on angle iron/gi frame. 83 supplying & erecting triple pole and neutral distribution board (tpndb), 3 pole/4 pole mccb as incomer & outgoing sp mcb (36 poles) or tp mcb of 12 ways (36 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/gi frame (vertical busbar type) as per specification no. sw-swr/mcbdb1 84 providing & erecting 4 pole mccb, 415 v, 100a, rated short-circuit breaking capacity 25 ka (ics=100% of icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/uv/trip alarm contact.mccb with phase barriers on both sides, insulation withstand capacity 800v, no line-load bias in provided enclosure/panel as per specification no. sw-swr/mccb (rate of 3 pole mccb +20% for 4 pole mccb= 5309x20%+5309=6370.80) 85 supplying and erecting cupboard for enclosing switchgears orforany other purposemadefromselected marine plywood planks 19 mm thick duly varnished/ painted from inside and from outside with brass hinges and locking arrangement with suitable lock with keys in duplicate. cupboard shall be duly grouted with suitable size of iron work in wall at the bottom. (size of cupboard 0.5x1x2+0.5x1x2+1x1x2= 4 sq.mtrs.) 86 supplyinganderectingiron, sheet metal work consisting of crcasheets, varioussectionsofiron,plates, chequeredplates,rods,bars,mspipes,etc. forpanel board or any other purpose with bending, cutting, drilling and welding completeerectedatthepositionwith necessarymaterialsdulypaintedwith one coat of red oxide and two coats of enamelpaint to match the switchgears or as per directions by the authority. ( 50x50x4mm angle @ 3.4 kgs x 6 mtrs.= 20.40 kgs i,e 20 kgs. 87 supplying and erecting 525 v 3 phase, 50 hz., mpp type capacitor having minimum overcurrent capacity of 1.8 in,peak inrush current capacity 300 inand minimum life 150000 hourskvarbank of all polypropylenecondensers (app)withthestandard capacities of 2, 3, 5, 7, 10, 12.5 and 15 kvarunitsofp.f. correctionforoperationon 3 phase 50 hz. with externally discharging resistances, earthing terminals and built on angle iron or channel iron frame work and providedwithterminalcoverbox completeerected onprovidediron bracketoronfloordulytestedby licensee.( original p.f=0.8 desired p.f = 0.95 for this multiplying factor is 0.421. so 0.421 x 46.440 = 19.55 i.e 10 kvar x 2= 20 kvar) 88 supplying, erecting & terminating fr xlpe insulated, galvanised steel formed wire armoured (strip) cable 1100 v, 2 core 6sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. cb-lt/al 89 supplying, erecting & terminatingfr xlpe insulated, galvanised steel formed wire armoured (strip) cable 1100 v, 3½ core50 sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. cb-lt/al (double run) 90 supplying, erecting & terminatingfr xlpe insulated, galvanised steel formed wire armoured (strip) cable 1100 v, 4 core6sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. cb-lt/al 91 supplying & erecting g.i. pipe‘a’ class 50 mmdia.erectedfor enclosingxlpearmouredcable on wall/poleas per specification no. cb-ce 92 supplying andlaying (including excavation of suitable width & depth up to 90 cm) 50 mmoutside dia. double wall corrugatedpipes(dwc) ofhdpe for enclosing cable below ground/road surface, to required depth complete. 93 supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mmoutside dia. double wall corrugatedpipes (dwc) ofhdpe for enclosing cable below ground/road surface, to required depth complete. 94 supplying & erectingcast iron cable indicatorplate buried along with route of cable for pvc / xlpe armoured cableas per specification no. cb-cip 95 supplying & erecting frp box of size 150mm x 125mm x 100 mm, 2.7 mm thickcomplete on pole/wallas per specification no. cb-sb 96 providing & erecting 8 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 135 mm a/f, top 70 mm a/f on provided foundation as per specification no. oh-pl/opl 97 providing and erecting galvanised 1000mm single arm sword type bracket with frp dome and ball as per specification no. oh-pl/pbkt 98 providing and erecting galvanised 1000mm double arm sword type bracket with frp dome and ball as per specification no. oh-pl/pbkt 99 providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results asper specification no. ea-ep 100 providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results asper specification no. ea-ep 101 providingpipetype earthing with 40mm. dia. g.i. pipe or 20 mm dia. g.i. rodcomplete with all materials testing and recording the results as per specification no. ea-ep 102 supplying and erecting gi strip of required size used for earthing on wall and/or any other purpose with necessary gi clampsfixed on wall painted with insulating and non-corrosive bond with requiredjointsas per specification no. ea-ep.(25x3mm strip. perpole 1.5 mtrs. so for 13 poles 13nos.x1.5mtrs.= 19.5 mtrs. weight of strip @0.590kgs/mtr. so 19.50mtrs.x0.590kgs.=11.51 kgs.) 103 supplying and erecting minimum three & above star rated 1 phase, 230 v, 50 hz, submersible pump set of 1.5 kw/2hp suitable for erection on open well, pump having delivery head from 29to 7 m and discharge from 30 to 600 litres. . per minute& pipe of suction 50 mm/delivery 50 mm diameter erected with necessary h type clamps as per specification no. wp-osp 104 supplying & erecting flat flexible 3 core 4 sq.mm pvc sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. 105 supplying & erecting automatic control panel for 1 ph, 230 volt, a.c. submersible/centrifugal pump set up to 3 hp consisting of dol starter of suitable relay range s.p.p., combined ammeter/ voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip 54 protection. 106 supplying & erecting carbon dioxide (co2) fire extinguisher of 4.5 kg. capacity cartridge type conform to is 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. m. s. flat with nut & bolts routed in wall complete. 107 making cement concretefoundationin 1:3:6 cement concrete,(20 to 25) mm. stone metal duly plastered with necessary curing forcomplete. (02x02x02 foundation for main control panel stand and for street light control panel 0.2x0.2x0.2mtr.=0.16 cu.mtrs.) 108 makingm- 20 grade reinforced cement concretefoundation by considering the safe soil bearing capacity at site as 10 t/sq.mat 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical gi pole). 109 supplying and erecting isi mark gi pipe 50 mm dia.‘b’ class at position with accessories complete as per specification no. cw-plb/gp. 110 supplying and erecting high density polythene pipe isi mark 50 mm. dia. suitable for pressure of 6 kg. / cm2 connected tojet/submersible pump with required material complete. 111 supplying and erecting 50 mm dia. gun metal sluice valve at position with necessary materials complete. 112 supplying and erecting non return valve 50 mm dia in position made of gun metal complete. 113 lum sump provision towards service connection charges1 no.3 phase @ rs. 55000/-/per total rs.55,000/-

Central Government/Public Sector

TRN :49022545 | 09 May, 2025

Tender Value : 5.34 Lacs

New Delhi - Delhi

Tender for annual repair and maintenance of to mps flats bungalows under sub div-iv of pawd-i dg 2025-26 sh improvement of drainage system in 8a lodhi estate

Related Searched Keywords : flat repair

List of flat-repair Tenders

Tender for general-ngo quarters flat a24-urgent special repair work of flat a24 at ngo quarters vellimadukunnu-general civil work

Tender for annual repair and maintenance of to mps flats/bungalows under sub div-ii of pawd-i dg.2025-26 (sh: repair of water proofing treatment works in bungalow no.c-1/15, c-1/17 pandara park and other bungalows)

Tender for annual repair and maintenance of to mps flats/bungalows under sub div-i of pawd-i dg.2025-26 (sh: repair of water proofing work at various bungalow)

Tender for annual repair and maintenance of to mps flats bungalows under sub div-iv of pawd-i dg 2025-26 sh improvement of drainage system in 8a lodhi estate

Get flat repair Tender Alert...

Related Searched Keywords : flat repair

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us