Filters

List of forged-bar Tenders

List of latest forged-bar Tenders in Indian Tenders. Click on any forged-bar Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for forged-bar Tenders.

All-Tenders (12)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :49054152 | 20 May, 2025

Tender Value : 77.92 Lacs

Abohar - Punjab

Tender for tender for special repair to building no p-137 at mil stn abohar; 1 demolition of cement concrete (un-reinforced) in floors / pavings, (below or above ground level) and of any description and in any position not otherwise complete all as specified and directed by engr-in-charge. 2 material & labour for 75mm thick pcc 1:3:6, type c1, using 20mm graded stone aggregate as in hard standing ,plinth protection/path etc,laid in suitable panels n.exc 3.00 m length finished even and smooth without using extra cement with contraction(dummy)joints 65mm deepx10mm wide joints filledwithbituminous sealing compound of grade ‘a’/bitumen mastic filler/sealant complete all as specified and directed by engr-in-charge. 3 dismantling brick tiles in floor or in roofs laid dry and pointed in any cement mortar complete all as specified and directed. 4 demolition of mud in roofs any thickness incl plastering and leeping 5 m & l for 40mm thick cement concrete type b0 1:2:4, (using 12.5mm graded stone aggregate) as in, surface finished even and smooth without using extra cement 6 m & l 10mm thick rendering in cement mortar 1:3 on fair facesof brick work or concrete surfaces of ceiling finished even and smooth without using extra cement complete all as specified and directed by engr-in-charge. 7 m&l for preparation of roof top surfaces,providing and applying uv stable single component smart care damp proof ultra is a fiber reinforced elastomeric liquied appplied water proofing membrane formulated with pu hybrid polymers and reinforcing acrylics fibres and having sri of 106 on top of concrete roof surface in three coats including self primer at ratio pf dampproof and water 3:1 and coverage @ 1 ltr/10 sqm with a thickness of 650 micron. note : (i) 6 hrs interval between two coats will be maintained. (ii)the treatment shall be carried out by authorised applicator approved by ge as per the manufacturer(iii)payment will be made after providing warrnty certificate from the company. 8 m&l 40mm thick brick tiles laid/beded including screed bed 15mm thick in cement mortar (1:6) on existing lime concrete sufaces of roof,joints grouted flush in cement mortar (1:3) mixed with liquid wpc @ as per manufacturer instruction per bag of cement of 50kg and including flush pointing as work proceed with same material complete all as specified in clause 11.27.3 of mes sch part-i (2009) complete all as specified and directed by engr-in-charge. 9 m&l 40mm thick brick tiles( old serviceable tiles obtained from demolition/desmantled item shall be reused) laid/beded including screed bed 15mm thick in cement mortar (1:6) on existing lime concrete sufaces of roof,joints grouted flush in cement mortar (1:3) mixed with liquid wpc @ as per manufacturer instruction per bag of cement of 50kg and including flush pointing as work proceed with same material complete all as specified in clause 11.27.3 of mes sch part-i (2009) complete all as specified and directed by engr-in-charge. 10 dismantlingof reinforced cement concrete by chiseling (without affecting other portion) of any description and in any position as in roofs, floors (other than ground floor), beams, landing, chajjas and similar suspended work. 11 m&l reinforced cement concrete 1:1 1/2:3 (nominal mix) using 20mm graded stone aggregate as in slab supported on walls,beams and columns in floors,roofs,landings,balconiies,deck slabs and in shelves and the like all as specified and directed. (form work & reinforcement measured separately). 12 m & l mild steel tmt bars 10mm dia or over cut to length bent to shape required including cranking, hooking ends and binding with ms wire (annealed) not less than 0.90mm dia all as in column, beam etc . 13 m&l for form work to soffits of suspended slabs such as roof slabs,floor slabs,landings and similar work not exc.200 mm thick(horizontal or sloping) rough finish surface of concrete flat all as specified and directed. 14 m&l for precast reinforced cement concrete (1:2:4) type b1 (using 20 mm graded crushed stone aggregate) as in cover slab of drain/manhole set in cm (1:6).note :- cost of form work is deemed to be inclusive of unit rate quoted by the contractor & reinforcementshall be measured & paid separately.) 15 taking down chowkatsor frame with shutters(without taking off shutters from the frame not exceeding 1.50 sqm each & removing to store all as specified. 16 taking down chowkatswith shutters(without taking off shutters from the frame exceeding 1.50 sqm each but not exceeding 4 sqm) 17 taking down wooden shutters only of any description area exceeding 1.0 sqm and not exceeding 2.0 sqm each and refixing in same opening after necessary easing, adjustments, minor repairs, oiling, adjustment with cutting or fixing plain fillets/planks made from second class hard wood etc to remove gap between floor and shutter complete all as specified and as directed by engineer-in- charge. 18 taking down wooden shutters only of any description area exceeding 1.0 sqm and not exceeding 2.0 sqm eachcomplete all as specified and as directed by engineer-in- charge. 19 s&f factory made single extruded wpc (wood polymer composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 45 x 70 mm comprising of virgin pvc polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying pvc solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 n (face) & 1100 n (edge), minimum compressive strength of 58 n/mm2, modules ofelasticity 900 n/mm2and resistance to spread of flame of class a category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with ms hold fast/ lugs/ss dash fasteners of required dia and length complete as per direction of engineer-in-charge. (m.s. hold fast/ lugs or ss dash fasteners shall be paid for separately). note :- for wpc solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made all as specified and directed . 20 providing and fixing factory made single extruded wpc (wood polymer composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 n (face) & 900 n (edge), minimum compressive strength 50 n/mm2, modulus of elasticity 850 n/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof, water/moisture proof and fire retardant. wpc to be laminated with pvc foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk s.s screws, all as per direction of engineer- in- charge including supply and fixing following items : (a) stainless steel (304 grade) finished butt hinges 100mm - 4 nos. per leaf (b) stainless steel (304 grade) finished square tower bolt 150 mm long - 2nos per leaf (c) stainless steel (304 grade) finished handles 150 mm - 2 nos. per leaf 21 supply and fixingfactory made pressed steel frames of size 125 x 60mm (thickness of sheet shall be 1.25mm) for doors with one or more rebates including necessary lugs and lock strike plate, etc. , includingbutt hinges suitable nos as directed for each leaf, complete all as specified and as directed by engineer-in- charge. 22 supply and fixingfactory made pressed steel frames of size 105 x 60mm (thickness of sheet shall be 1.25mm) for doors with one or more rebates including necessary lugs and lock strike plate, etc. , including butt hinges suitable nos as directed for each leaf, complete all as specified and as directed by engineer-in- charge. 23 m&l cement concrete 1:3:6 type c-1 using 20mm graded stone aggregate for filling of pressed steel frame and hold fast blocks etc complete all as specified and directed by engineer - in - charge. 24 s & f factory made plain framed, panelled shutter iind class hardwood rail and style 35 mm thickness (two panel) with lock rail and panel of 9 mm b.w.p. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. the size of rail and stile as per is : 1003 (part i), kiln seasoned and chemically pressure treated complete all as specified and directed by engineer - in - charge. 25 s & f factory made 35mm thick iind class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in ssr part – i, section – 8, clause 8.20 (a) ; supplied and fitted to chowkats complete all as specified and directed by engineer - in - charge. 26 s & f100 mm aluminium alloy anodised butt hinges, and fixed with steel scerws for frp doors/pvc door, type b-21complete all as specified and directed by engineer - in - charge. 27 s & f in repair 100 mm mild steel butt hinges, and fixed with steel scerws for wooden doors, complete all as specified and directed by engineer - in - charge.note :- rate deemed including necessary welding etc) 28 s & f tower bolt 200 mm of aluminum complete all as specified and directed by engineer - in - charge. 29 s & f in repair tower bolt 200 mm of aluminum complete all as specified and directed by engineer - in - charge. 30 s & f door handle d type 150 mm of aluminum complete all as specified and directed by engineer - in - charge. 31 s & f in repair door handle d type 150 mm of aluminum complete all as specified and directed by engineer - in - charge. 32 s & f aluminium alloy, anodised, sliding door bolt 300mm with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extrudedsections or cast-aluminium alloy and fixed. 33 s & f in replacement aluminium alloy, anodised, sliding door bolt 300mm with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extrudedsections or cast-aluminium alloy and fixed. 34 s&f floor door stopper of aluminum allow body and tongue, 150mm overall length, anodised, with hard drawn steel spring, fixed in floor. 35 s&f in repairs floor door stopper of aluminum allow body and tongue, 150mm overall length, anodised, with hard drawn steel spring, fixed in floor. 36 s & f mild steel 300mm ordinary rat rail rod pattern spring inluding roller and roller plate complete all as specified. 37 s & f in repairs mild steel 300mm ordinary rat rail rod pattern spring inluding roller and roller plate complete all as specified. 38 s& fstainless steel curtain rod 25 mm dia , including fancy type brackets and pair of decorated end knobs (finials), stop roller etc.as per site requirement, fixed to wall with fixing accessories,including taking down old existing curtain rods any description complete all as specified and directed by engr-in-charge. 39 s&f factory made box type steel window with side hung shuters both glazed and gauged, shutter frame 60x25mm erw hollow p section with wall thickness not less than 1mm fixed to pressed steel frame 120mmx70mmx1.60mm thick including fixing glazed portion, iron grills 8mm suare ms barhinges with steel handle and fitting, lugs etc., including one shop coat of primer complete all as specified.(drg no btd889 sheet 1/4 ).note :- (i) wire mesh and glass shall be measured and paid separately under relevent items of sch/boq.(ii)measurement for payment shall be the opening area of the window between inner edges of wall. 40 s&f factory made box type steel window with side hung glazedshutter, frame 60x25mm erw hollow p section with wall thickness not less than 1mm fixed to pressed steel frame 120mmx70mmx1.60mm thick including fixing glazed portion, iron grills 8mm suare ms barhinges with steel handle and fitting, lugs etc., including one shop coat of primer complete all as specified.note :- (i)wire mesh and glass shall be measured and paid separately under relevent items of sch/boq.(ii)measurement for payment shall be the opening area of the window between inner edges of wall. 41 s&f stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18 mm all as specified. 42 s & f in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18 mm all as specified. 43 s & f 4 mm thick sheet glass ordinary quality and glazing within square not exceeding 0.50 sqm including aluminium cleat/rubber beading in each pane complete all as specified and directed by engineer - in - charge. 44 supply & fixing aluminium anodisedframes/chowkhats,shutter and like made out of aluminium sectionpowder coated(minimum thickness of powder coating not less than 50 micron) for window, ventilators and aluminium partition with one or more rebates or without rebate including joining cleat for fixing etc., the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawal plug and screw or with fixing clip or with expansion hold plate fasteners. aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required complete all as specified and as directed by engineer-in-charge.. 45 s & f figured glass 4 mm thick pin head type and glazing withnot exceeding 0.50 sqmincluding aluminium cleat/rubber beading in each pan complete all as specified and directed by engineer - in - charge. 46 material and labour for machine cut 16 to 18 mm thick, kota stone slab (size of slab not less than 500x550mm for flooring and in single piece for treads of staircase), laid over and including 20 mm thick bedding layer in cement mortar (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing /grinding (mirror finish) andpolishing by machine, including machine cutting to make it square or rectangular as per site complete all as specified and as directed by engineer-in-charge. 47 material and labour for machine cut 16-18mm thick, kota stone slab as in skirting, dado and on pillar, laid over and including 10 mm thick bedding layer in cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing /grinding (mirror finish ) and polishing by machine, including machine cutting to make it square or rectangularcomplete all as specified and as directed by engineer-in-charge. 48 taking down cement or cement lime plaster from brick walls etc including raking out joints, hacking for key scrubbing down with water etc. 49 m & lfor rendering 15mm thik on fair faces of brick work in cement mortar 1:6 finished even & smooth without using extra cement. 50 m & lfor rendering 15mm thick on fair faces of brick work in cement mortar 1:4 finished even & smooth without using extra cement. 51 m&l rendering10 mm thick in cement mortar 1:3 on fair faces of concrete surfaces of ceiling finishing even and smooth without using extra cement. 52 m&l integal water proofing compound 53 preparation of new plastered surfaces/existing platered surfaces and applyingwall care putty in internal/external walls/rcc surfaces/soffits of chajjas/roof projections/cantilevers/balcony/ceilings etc (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving interior/exterior painting complete all as specified and directed.note : (i) the prepared surface after wall putty, the contractor will inform to the ge as well as to the engineer-in-charge for site inspection before applying further external finishes. please note that the further external finishes work will start only after approval of the prepared surface from the ge as well as to the engineer-in-charge through site order. 54 preparation of surfaces and applying 02 coats of interior emulsion paint (light shade) @ 12 sq.m/litre/2 coats by using spray gun to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. 55 preparation of surfaces and applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/litre/2 coats by by using spray gun to ceiling surfaces over & including a coat of interior primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. 56 preparation of surfaces and applying 02 coats of exterior emulsion paint (light shade)@ 5 sq.m/litre/2 coats by using spray gun to external walls/rcc surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed. 57 preparation of new/existing plastered surfaces as in ceilings and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. this shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. about 1.3 kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed by engineer-in-charge. 58 preparation of new/existing plastered surfaces as in walls and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. this shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. about 1.3 kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed by engineer-in-charge. 59 m & l providing two coats of synthetic enamel paint over new steel surfaces and a coat of red oxide primer onincluding preparation of surface of any description not exceeding 10 cm width or girth complete all as specified and directed by engineer -in -charge. 60 m & l providing two coats of synthetic enamel paint over new wooden surface including preparation of surface withprimer all as specified. 61 m&l for preperationof old steel surface and applying two coat of synthetic enamel paint complete all as specified and directed by engineer -in -charge. 62 m&l for preperationof old wooden surface and applying two coat of synthetic enamel paintcomplete all as specified and directed by engineer -in -charge. 63 m&l for shotcreting 25mm thick in rcc columns, beams and slabs etc in layers with approved design mix (minimum cement content of 350 kg/cum on m-25) concrete having the specified minimum characterristic compressive strength (with ordinary protland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria) including the cost of centering and shuttering at edges and corners etc as directed by engineer-in-charge including chipping of unsound /weak concrete material 25 mmaverage thickness from slabs,beams, columns etc with manual chisel and /or by standred power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes and thoroughly washing with water and allowing it to dry etc. including removal of rust by applying approved rust removal chemical & the coating with dr fixit epoxy zinc primer or equivalent @ 6sqm/ltr at dft of 100microns as per specifications and disposal of debries for all lead and lifts all complete as per direction of engineer-in-charge. 64 m&l hard drawn steel wire fabric not exc 4kg/sqm cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcemntall as specified & directed by engineer-in-charge. 65 m & l 5mm thick rendering in cement mortar 1:3 on fair facesof brick work or concrete surfaces of ceiling finished even and smooth without using extra cementcomplete all as specified and directed by engineer - in - charge . 66 dismantling structural steel work including doors,gates but excluding framed truss etc. 67 s & f framed work such as grills,cooler stand ,ladder grating and sun shed etc., with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work or water tanks and similar work conforming tofe 410-0 or fe 310-0 all as specified . 68 dismantling of floor hearth or wall tiling including cement mortar bedding ( but not backing) and rubbish off the permices. 69 s&f glazed ceramic colouredtiles joint free 350x250x7mm/450x350x7mm square or rectanguleras on walls etc set and jointed in neat cement slurry and pointed in whiteor coloured cement to match over and including 10mm thick rendering in cm 1:4 complete all as specified and directed by engr-in-charge. 70 m&l non skid ceramic coloured /printed tiles 7 to 8 mm thick( square / rectangular) area of each tile exc. 0.11 sqm but n. exc, 0.18 sqm in floor and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shadeover and incl 15 mm thick screed bed in cm 1:6 complete all as specified and directed by engr-in-charge. 71 m&l cement concrete type b-0, 1:2:4 using 12.5 mm graded stone aggregate as in floors 25 mm thick for tilesall as specified.& directed by engr -in-charge.. 72 m&l 16-18 mm thick granite (of any type ) work (table rubbed and polished ) in cooking platform and likein cm (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding/moulding of edges. 73 demolitionof cement concrete ( un re-inforced) of any description in ground floor and pavings exc15 cm thickness (below or above gl). 74 material and labour for water proofing treatment to rcc sunken slab and adjoining vertical slab as described following any one method complete as per directions of ge. 75 method 1(a) supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, smart care damp proof 2k, having 100% elongation as per astm d412, resisting 5 bars hydrostatic pressure as per din 1048, reduction to rapid chloride shall be 70 as per din 1048, crack bridging upto 1.2mm as per astm 4548.5 clean all working surface & made free from dirt, grease laitance etc. after inspection for all working area rough surface, cracks & from dirt, grease laitance etc. after inspection for all working area rough surface, cracks & construction joint are treated by polymer modified mortar of 1:1:4 (1 cement : 1polymer : 4 sand). making gola of size 75x75mm at junction of vertical & horizontal with the polymer modified mortar of 1:1:4 (1 cement : 1 polymer : 4 sand). the coating shall be terminated at 1600mm in toilet/2100mm in bathroom on vertical walls. the mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing and shall have consumption of 1.5kg/sqm per coats, etc, complete as per manufactures specifications.(b) bore packing: all the borehole gaps between concrete surface and pvc pipe of various dia upto the neck level shall be filled with non-shrink free flow grout – smart care gp grout having dual shrinkage compensation property. before the bore packing, surface of the pvc pie and concrete surface will be made rough and sand will be sprinkled with polymer bonding agent. (c) apply12-15mm plaster on slab and vertical surface admixed with smart care vitalia neo @200ml per bag of cement before treatment. 76 method 2(a) supplying and applying two component cementitious & acrylic flexible water proofing & protective coating, two coats with 1mm dft, having hydrostatic (positive) water pressure resistance (din 1048) is 7. abrasion resistance, cm/km is 0.09 of dr fixit pidifin 2k @ 1.5kg/sqm with a paint brush over existing slab surface and adjoining vertical surface. the polyester reinforced coated netof 45g/sqm, 2.5mmx2.5mm is laying on the surface immediately on the first coat of two component modified polymer dr fixit pidifin 2k. after removal of all lose materials like dust etc. with wire brush coir brushes from surface to get absolutely cleaned surface free of foreign contaminant filling of crack and patches with polymer based mortar/micro concrete, after that making the gola onsurrounding wall’s junction and seal the vertical walls. in case of core cutting on the surface, the joint is seal with non-shrink grout.(b) the coating shall be terminated at 1600mm in toilet/2100mm in bathroom on vertical walls.(c) apply12-15mm water proof plaster on slab and vertical surface admixed with dr fixit pidiproof 77 m & l pcc (1:5:10)using 40mm graded burnt bricksaggregate as in foundation filling & mass concrete or as in sunkenfloor complete all as specified & directed by engineer-in-charge 78 dismantling water tanks and removing to store ofexc 500 and nexc 1000 ltr capacity 79 s & f rotational moulded polythene three layered white coloured water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in ssr part i of capacity 1000 litres all as specified and directed by engineer - in - charge . 80 s&f in repair 20mm ball brass valves, high pressure, with polytheene float and flynut complete, screwed for iron pipe orr brass ferrule and fixed. 81 s & f in 20mm bore gunmetal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed all as specified . 82 s & f in 25 mm bore gunmetal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed all as specified . 83 s & f in repairs pvc 10 ltrs syphonic action type flushing cistern, low level with inlet, ball valve, float and handle including brackets, flush pipe of pvc 32mm bore and connection to wc pan complete all as specified. 84 s&f in repair viterous china squating pan orrisa pattern size 580/440mm wash down water closet pan ,white (excluding fixing bolts, flushing cistern and flush pipe) with plastic seat cover. 85 s&f in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but including connection to drain (or outgoing pipe) and to flushing pipe ,anti-syphonage pipe and white closed patern with flat bottom & mild steel cromium plated or aluminium hinging device plasticseat cover complete . 86 s&f repairs vitreous china half stall urinals flat back white minimum with grating and union for discharge pipe ,providing & fixing plugs, bedding urinal against wall in cm 1:2 , securing urinal to plugs with & incl 60mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cistern with nbrackets, flush pipe, grating and union for discharge pipe complete all as specified. 87 s & f in repairs vitrous china oval wash hand basin white of size 550x400 mm including brackets 300mm long pvc connection with brass nuts, 40mm dia waste coupling including cutting for and pinning in end of brackets or erecting stand etccoloured top bowl type screwed shank fly nut flange end including cutting for and pinning in granite slab of hole including 32 mm dia chromium plated waste coupling and bottle trap all as specified. 88 s&f in repair 600mm x 450mm beveled edge mirror of selected quality glass on 6mm thick commercial plywood and fixed wooden plugs with chromium plated brass screw and cup washes fixed in repair. 89 s & f repairs 15 mm bore concealed stop cock cast copper alloy screwed down high pressurewith crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed but fancy type chromium plated with long shank and cup (concealled type) 90 s & f in repairs 15mm bore angle cock one waychromium plated, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified . 91 s & f in repairs 15 mm bore bib tap fancy type chromium plated with crutch or butterfly handle screwed down ,screwed for iron pipe all as specified. 92 s&f in repairs pillar taps 15mm borefancy type chromium plated cast copper alloywith capstan heads scre-wed down high pressure with or without lettered hot orcold with long screwed shanks and fly nuts screwed for iron pipe . isi marked 93 s&f in repair brass chromium plated central hole basin mixer with regular spout,popup waste system and 450mm long braided hoses with connection and nuts complete all as specified and directed by engr-in-charge. 94 s&fin repair brass chromium plated shower rose 125mm size with swivel joints,any size, incl shower arm fixing to pipe or union complete all as specified and directed by engr-in-charge. 95 s&f in repair pvc connection both side brass unions internal for size 15mm dia and 450mm long all as specified and directed by engineer-in-charge. 96 s&f ewc jet spray complete all as specified and directed. 97 s & f in repairsoap dish approximately size 160 x160x 90 mm and fixed withas chromium plated brass screws complete all as specified and directed by engineer -in -charge. 98 s&f peg set of stainless steel solid body of 125mm to 175 mm having 6 nos hooks fixed with brass chromium plated screws complete in all as specified 99 taking up or down steel tubing of 15 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed by engr-in-charge. 100 fixing only mild steel tubes of size 15mm bore (medium grade) galvanised with all fittingsand fixed complete to wallall as specified & directed by engineer-in-charge. 101 supply & fixing mild steel tubes of size 15mm bore (medium grade) galvanised with all fittings and fixed complete to wallall as specified & directed by engineer-in-charge. 102 taking up or down steel tubing of 20 mm bore and connections, including cleaning for re-fixing or removal to store omplete all as specified and directed by engineer -in -charge. 103 supply & fixing of 16mm outer dia cpvc pipes sdr 11 including all fittings plain/brass threaded cpvc sdr 11 fittings (like elbow, tee, socket, reducer, union, bushing, step over bends, end cap, end plugs, one side brass/two side brass etc) fixed along walls, ceiling or laying under floors etc and including cpvc solvent cement for jointing omplete all as specified and directed by engineer -in -charge. 104 supply & fixing of 20mm outer dia cpvc pipes sdr 11 including all fittings plain/brass threaded cpvc sdr 11 fittings (like elbow, tee, socket, reducer, union, bushing, step over bends, end cap, end plugs, one side brass/two side brass etc) fixed along walls, ceiling or laying under floors etc and including cpvc solvent cement for jointing omplete all as specified and directed by engineer -in -charge. note :-(i) pipes inside the buildings shall be fixed concealed and outside the buildings shall be fixed on the surface along wall with and including suitable size clamps/brackets (interval of 1m and pipe keeping 100mm away from wall ) of suitable size fixed with fasteners/nut bolts, as directed by engineer-in-charge.(ii)bracket, clamp, nut bolt, fastner, slotted channel etc shall be made of deep drawn low carbon steel material with hot dip zinc aluminium flake coated and fixed all as shown on btd drawing cost for same shall deemed to be included in the quoted unit rate and nothing extra shall be admissible on this account. 105 supply & fixing of 25mm outer dia cpvc pipes sdr 11 including all fittings plain/brass threaded cpvc sdr 11 fittings (like elbow, tee, socket, reducer, union, bushing, step over bends, end cap, end plugs, one side brass/two side brass etc) fixed along walls, ceiling or laying under floors etc and including cpvc solvent cement for jointing complete all as specified and as directed.note :- (i) pipes inside the buildings shall be fixed concealed and outside thebuildings shall be fixed on the surface along wall with and including suitable size clamps/brackets (interval of 1m and pipe keeping 100mm away from wall ) of suitable size fixed with fasteners/nut bolts, as directed by engineer-in-charge.(ii) bracket, clamp, nut bolt, fastner, slotted channel etc shall be made of deep drawn low carbon steel material with hot dip zinc aluminium flake coated and fixed all as shown on btd drawing cost for same shall deemed to be included in the quoted unit rate and nothing extra shall be admissible on this account. 106 taking up or down steel tubing of 25 to 32 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed by engr-in-charge. 107 s & f 40mm bore medium grade tube galvanised with all fittings and fixed complete concealed including groove cutting for concealing to walls & ceiling or laid in floor complete all as specified and directed by engineer - in - charge. 108 dismantling of cast iron pipes jointed in cement mortar and taking out from trenches walls etc upto 100 mm bore all as specified and directed by engr-in-charge . 109 supply & fixing 110mm bore upvc pipes grade b single socketed in any length with rubber ring joints, laid in trenches, joints fixed with pipe joint lubricant c complete all as specified and directed by engr-in-charge. 110 supply & fixing 75mm bore upvc pipes grade b single socketed in any length with rubber ring joints, laid in trenches, joints fixed with pipe joint lubricant complete all as specified and directed by engr-in-charge. 111 supply & fixing upvc junction (double t/socket) grade b equal or unequal suitable for 110mm bore pipe complete all as specified and complete all as specified and directed by engr-in-charge. 112 all as per item no 109 above 113 supply & fixing upvc bends (any radius) grade b suitable for 110mm bore pipe complete all as specified and directed by engr-in-charge. 114 all as per item no 111 above 115 supply & fixing upvc vent cowl grade b suitable for 110mm bore pipe complete all as specified and directed by engr-in-charge. 116 supply & fixing pvc vent cowl grade b suitable for 75 mm bore pipe complete all as specified and directed by engr-in-charge. 117 supply & fixing upvc grade b multi floor trap 110 mm bore and 600mm long with grating including jointing with with pipe joint lubricant complete all as specified and directed by engr-in-charge. 118 supply & fixing upvc grade b multi floor trap 75 mm bore and 600mm long with grating including jointing with with pipe joint lubricant complete all as specified and directed by engr-in-charge. 119 demolition of brick work built in cement mortar including all quoins, arches, pillars etc . 120 m&l for brick work with subclass‘b’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed by engineer-in-charge. 121 labour only forbrick work built in cm (1:6) with subclass b bricks, straight or curved on plan exceeding 6m mean radiuswith reusing the old bricks obtained fromitem no 118 . 122 m&l for taking down carefully point wiring complete including fixture and fittings from boards/outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc and making good to disturbed area all as specified 123 m&l for point wiring complete with isi marked 1.5 sqmm single core pvc insulated unsheathed cable 1100v grade frls with multistranded copper conductor drawn through concealed in wall/ceiling surface and its accessories includingpvc rigid concealed conduit heavy duty suitable size with all accessories such as bend, reducers, ms hooks, ms junction boxes, 2mm thick galvanised steel pressed sunken terminal boxes of suitable sizes for mounting of switchs, sockets, fan regulator etc covered with 3 mm thick plastic laminated hylem top cover sheet of required color fixed with brass screws and cup washers painting terminal boxes inside and outside with one coat red oxide primer includingfixing and 1.5 sqmm copper conductor as earth continuity to connect common earth dolly completed for the following all as specified 124 (a)one light point/fan point/exhaust controlled byone way switch 125 (b)one light point controlled by one two way switch 126 (c)one 5 pin socket out let 5 amps on the same board with other switches 127 (d)one 5 pin, 5a switch socket outlet point on independent board with other switches. 128 all as per item no. 02 here-in-before but with 2.5 sqmm cable for 1no 16 amps socket outlet point on independent board including 2.5 sqmm pvc insulated unsheathed cable multistranded with copper conductor green in colour as earth continuity conductor all as specified 129 s&f piano type switch single pole 1 way 5/6 amps 230 volt ac supply complete all as specified and directed by engr-in-charge. 130 s&f socket two in one 6/5 pin 5 amps230 volt ac supply complete all as specified and directed by engr-in-charge. 131 s&f piano type switch single pole 1 way 15/16 amps 230 volt ac supply complete all as specified and directed by engr-in-charge. 132 s&f piano flush type switch single pole 2 way 15 amps 230 volt ac supply complete all as specified and directed by engr-in-charge. 133 s&f socket two in one 6/5 pin 15/16 amps230 volt ac supply complete all as specified and directed by engr-in-charge. 134 s&f ceiling rose surface type, 65mm x 50mm three terminals, 3 phase / pvc / polycarbonate isolated body complete all as specified and directed by engr-in-charge. 135 s & f stepped type electronic fan regulator flush type on the existingphenolic laminated sheet etc. as reqd complete all as pecified and directed. 136 s&f lamp holder, pvc/polycarbonate type with back plate suitable for batten fittings with led bulb 09 watt complete all as specified 137 supply and fixing led lights fitting 20 w, 220v, ac decorative box type with driver, holder including led tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. 138 supply and fixing led light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 v ac decorative type with driver holder and led lamp including connecting up with three core flexible copper conductor cable of suitable size complete. 139 supply and fixing led street light fitting 35 watt 230 v ac outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with ip 65/66 protection complete. 140 s&f single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole mcb 20 amps capacity complete all as specified and directed by engr-in-charge. 141 s&f sheet metal enclosure for vtpn dbs 415 volts 08 way with 200 amps rated bus bar neautral link, earth bar double door with mccb as incomer complete all as specified 142 s&f sheet metal enclosure for vtpn dbs 415 volts 04 way with 200 amps rated bus bar neautral link, earth bar double door with mcb tpn as incomer complete all as specified and directed by engr-in-charge. 143 s&f sheet metal enclosure for dbs spn 230 volts 12 way with 200 amps rated bus bar neautral link, earth bar double door complete all as specified and directed by engr-in-charge. 144 supply and fixing 415v 16 ka 415 volts mccb of cap 100 amps following poles and current carrying capacity in the db complete with connection testing and commissioning. 145 supply and fixing 415v 10ka b curve miniature circuit breaker (mcb) tpn/4p of capacity 40 to 100 amps poles and current carrying capacity in the db complete with connection testing and commissioning. 146 supply and fixing 240v, 10 ka b curve miniature circuit breaker (mcb) of single poles and current carrying capacity 6 to 32 amp, in the mcb db complete with connection testing and commissioning complete all as specified and directed by engr-in-charge. 147 supply and fixing amp rating 240v, 10ka c curve miniature circuit breaker (mcb) of spn 40 to 63 amp and current carrying capacity in the mcb db complete with connection testing and commissioning complete all as specified 148 m&l forsubmain wiring comprising single core , 2 runs of 2.5 sqmm nominal cross sectional areamulti stranded copper conductor cable, pvc insulated unsheathed 1100 volts gradedrawing in and including appropriate dia. in surface/recessed pvc conduit and its fittings completeincluding provision of 1x2.5 sqmm nominal cross sectional areamulti stranded copper conductor cable, pvc insulated unsheathed 1100 volts grade as earthwire and using color code as per is and specified and making good all disturbed work to match the existing complete incl taking down old unsv sub main complete all as specified and directed by engr-in-charge. note :- (i)extra length of cables/ wire required for connection to mcbs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly.(ii) two run of wire, one run of earth wire and conduct shall be measured as one unit. 149 all as per item no 142 abovebut for single core , 2 runs of 4.0 sqmm nominal cross sectional area including provision of 1x4.0 sqmm nominal cross sectional area complete all as specified and directed by engr-in-charge. 150 all as per item no 142 above but for single core , 2 runs of 6.0 sqmm nominal cross sectional area including provision of 1x 6.0 sqmm nominal cross sectional area complete all as specified and directed by engr-in-charge. 151 m&l for earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 m below normal gl connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washersand earth strip protected by 15 mm dia gi pipe medium grade and connected to main distribution board panel/earthing test point all as shown on electrical plate no.3 of ssr part i and all as specified including testing on completionincluding taking down old unserviceable earthing any type complete all as specified and directed by engr-in-charge. note :-gi wire 4mm dia including test point terminal box include in the quoted rate.

Central Government/Public Sector

TRN :49055122 | 29 May, 2025

Tender Value : 40.00 Lacs

Palam - Delhi

Tender for comprehensive maintenance and certain misc b/r works in tech area at af stn palam under ge (af) palam, delhi cantt - 10; 1.00 taking down cement plaster on brick, stone or concrete surfaces of walls etc incl racking out joints hacking for key scrubbing down with water etc and removing the debris from site to out site mod land complete all as specified and directed by engr-in-charge . 2.00 m&l for 10mm thick rendering of ready mix mortar of approved make on brick work or concrete surfaces on internal walls, finished the surface even and smooth without using extra cement as on wall as whole or in patch etc complete all as specified and as directed. make- birla (hil) or its equilent. 3.00 m&l for 15mm thick rendering of ready mix mortar of approved make on brick work or concrete surfaces on external walls, finished the surface even and fair without using extra cement by using dr. fixit (wpc) @ 3% of wt of cement content complete all as specified and as directed. note:- water proofing compound shall be measured and paid seprately. 4.00 m&l for 5mm thick cement plater of ready mix mortar of approved make as on ceiling & plastering to be finished even & smooth without using extra cement complete all as specified and as directed. make- birla (hil) or its equilent. 5.00 supply only integral water proofing compound complete all as specified and as directed. 6.00 m&l for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkalic resistent primer complete all as specified and as directed 7.00 m&l for applying two coats of 100% premium acrylic emulsion paint having voc less than 50 gm/ltr and uv resistance as per is 15489-2004, alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.9 litre /10 sqm over new surfaces complete all as specified and as directed. 8.00 m&l for preparation of newly plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of alkalic resistent primer complete all as specified and as directed. 9.00 m&l for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster (1:4) (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and as directed. note:- payment for providing grooves shall be measured and paid separately. 10.00 m&l for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications complete all as specified and as directed. 11.00 demolition of cement concrete (un reinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level) and removing the debris from site to out site mod land complete all as specified and as directed. 12.00 m & l for 75mm thick cement concrete (1:3:6) type c2 (using 40mm graded stone aggregate) as in plinth protection, finished even and smooth without using extra cement, including making joints 12 mm wide to the full depth of pcc at every 3 metres and at every change of direction and filling the same with & including bitumen 85/25 and sand in the proportion of (1:3 ) by weight complete all as specified and as directed. 13.00 m&l for 75mm thick pcc (1:3:6) type c2 (using 40mm graded stone aggregate) as in path and paving, finished even and smooth without using extra cement complete all as specified and as directed. 14.00 m&l for 25 mm thick pcc (1:2:4) type b1 (using 20mm graded stone aggregate) as in floor, finished even and smooth with using extra cement complete all as specified and as directed. 15.00 m&l for plain cement concrete (1:3:6) type c1 (using 20 mm graded stone aggregate) as in surface channel/drain complete all as specified and as directed. 16.00 extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and as directed. 17.00 supply and fixing in repairs, sfrc drain cover any size, 75mm thick laid over existing drain complete all as specified and as directed by engr-in-charge. notes: - (i) make of sfrc manhole/drain cover and frame : (a) m/s ps concrete.(b) m/s kk manhole.(c) or equivalent as approved by ge. (ii) contractor will provide manufacturer test certificate of sfrc cover . 18.00 dismantling wall and ceiling boards ( fibre, pulp, insulation etc.) or insulation boards / slabs / blankets, any thickness, including fillets complete all as specified and as directed. 19.00 m & l for provding false ceiling of 12mm thick fine fissure board sharped finished mineral fiber accountic false ceiling tiles with back of the duly sanded and finshed with a coat of protective paint and front duly finished false system of size (600x600) mm having noise reduction co-efficient of 0.55 light reflection of 80% thermal conductivity k=0.057 w/wwc and humidity resistance of 95% fixed to true look pvc die kl -24 suspension system (hot dipped aglvanised steel section) of exposed t section consisting of perimeter wall angle of size (24x24) mm of thickness 0.45 of mm c/c universal main runner of t shape with double rotary siticing of size (38x25) mm of lenght 1200mm made from 0.33gs steel of lenght 3.60 mtr to be spced at 600x 600mm size) c/c cro runner t shape wtih double rotary siticing of size (30x24)mm of length 1200mm made 0.25 thick gs sheet spaced @ 600mm c/c (600mm 600mm) size complete all as specified and directed by engineer -in- charge. 20.00 taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 sqm each including cutting holes in walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified and as directed. 21.00 taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.50 sqm but n. exc 4.0sqm each including cutting holes in walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified and as directed. 22.00 taking down shutters of any description of size n. exc 1 sqm each complete all as specified and as directed. 23.00 taking down shutters of any description of size exc 1 sqm and n exc 2 sqm each complete all as specified and as directed. 24.00 taking down shutters of any description exc 1 sqm and n exc 2 sqm each and re-fixing in the same opening after necessary repairing viz shifting of hinges/tower bolt / handle position etc complete all as specified and as directed. note:- cost of screws/nails and minor items shall be deemed to be included in the unit quoted rates. 25.00 s&f anodised aluminium powder coated frame for door, windows, ventilators, partition wall with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed 26.00 s&f anodised aluminium powder coated door shutter, aluminium section wt 0.55 kg/m including neccesary joining cleats, glazing clips, rubber neoprene packing, aluminium handle 2 nos in each door, hinges, anodised aluminium snap beading screw etc. complete all as specified and as directed. 27.00 s&f anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised, handle 2 nos in each window, aluminium fittings such as peg stays150mm long (1 no.), hinges type b-21100mm long (2 no.), suitable handle (1no.) complete all as specified and as directed. 28.00 s&f aluminium anodised with powder coating (minimum thickness of powder coating 50 micron) grill of design and parttern as approved by ge including aluminium beading complete all as specified and as directed. 29.00 s&f 5.50mm thick tinted, sheet glass of selected quality fixed to aluminium frame work complete all as specified and as directed. 30.00 m&l for 12mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination & fixed with screws to timber/aluminium frame complete all as specified and as directed 31.00 s & f door closer hydraulically regulated designation no 3 universal type suitable for door shutter of 851 to 1000 mm in width of aluminum body (die cast) weight between 61 to 80 kg complete all as specified and as directed. 32.00 m&l double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other party made of mild steel heavy duty complete all as specified and as directed. 33.00 s & f mild steel mortic lock vertical type size 100mm 4 levers complete all as specified and as directed. 34.00 s&f aluminium tower bolt of extruded section, 150mm length of bolt and fixed with screws complete all as specified and as directed. 35.00 s&f aluminium door stopper double legged with rubber shoe 75mm long fixed to door shutters complete all as specified and as directed. 36.00 m & l 2nd class hard wood plain, solid, straight chowkhats, and frame wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed. 37.00 s&f for 30mm thick factory made flush shutter, solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and as directed. 38.00 s&f for factory made single extruded wpc (wood polymer composit) solid door/window and other frames/chowkhat of size 50x100 mm comprising of virgin pvc polymer of k value 58-60 (suspension grade) calcium carbonte and natural fibers (wood powder/rice husk/wheat husk) and non toxic aditives(maximum toxicity index of 12 for 100 gms) fabricated with full body threaded star headed ss screws having minimum frame density of 750 kg/cum screw withdrawl strength of 2200 n(face) & 1100n(edge) minimum compressive strength of 58 n/sqmm modules of ealsticity 900 n/sqmm and resistance to spread of flame of class a category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with ms hold fast/ lugs/ss dash fasteners of required dia and length complete as per direction of enger-in-charge. make- m/s rajshree plastiwood ltd or its equivalent as per list of make. 39.00 s&f for factory made single extruded wpc (wood polymer composit) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of k value 58-60 (suspension grade) calcium carbonte and natural fibers (wood powder/rice husk/wheat husk) and non toxic aditives(maximum toxicity index of 12 for 100 gms) fabricated with full body threaded star headed ss screws having minimum frame density of 650 kg/cum screw withdrawl strength of 1800 n(face) & 900n(edge) minimum compressive strength of 50 n/sqmm modules of ealsticity 850 n/sqmm and resistance to spread of flame of class a category with property of being termite/borer proof, water/moisture proof and fire retardant. wpc to be laminated with pvc foil of minimum 14 microns thick of approved design pasted with hotmelt adhesiv on both faces of shutter and fixing with stailess steel butt hinges of required size with necessary full body threaded star headed counter sunk ss screws all as direction of enger-in-charge. make:- m/s rajshree plastiwood ltd or its equivalent as per list of makes. 40.00 dismantling of floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles and rubbish off the premises complete all as specified and as directed. 41.00 m&l for vitrified ceramic tiles 8-10 mm thick, 1st quilaty (square/rectuangular) polished, double charge shade, area of each tiles exceeding 0.36 sqm but not exc. 0.42 sqm, as in floors etc. set and jointed with neat cement slurry and pointed in white or coloured cement to match with and including over15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. 42.00 description all as per srl item no. 39.00 bove but as in skirting over 10mm thick plastering with cm (1:4) complete all as specified and as directed. 43.00 m &l for ceramic coloured/ printed non-skid tiles of size 7 to 8 mm thick( square / rectangular) area of each tile exceeding 0.06 sqm but n exc 0.16 sqm laid as in floors, set and jointed with neat cement slurry with and including over 15 mm thick screed bedding layers of cement sand mortar (1:4) and pointed with coloured cement to match with surfaces of tiles complete all as specified and as directed. 44.00 m&l for glazed ceramic coloured tiles (colour & shade as approved) of size (450x350)mm x 7mm thick as in vertical surfaces as in skirting and dado, set and jointed in neat cement slurry with amd including over 15mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed. 45.00 s&f in repair wash hand basin, vitreous china, flat back (550x400)mm size, white including pvc waste coupling 32mm size, pvc waste pipe 32mm bore, pair of brackets of mild steel (35 x 35 x 6)mm size including one mixer cast copper alloy 15mm bore, one brass stop valve 15mm bore and one pvc connection15mm size with ptmt nuts of length 450mm long complete all as specified and as directed by engineer-in-charge. 46.00 supply & fixing in repair vitreous china ewc super constellation including flushing cistern of size (83x37x66)cm with s trap complete all as specified and as directed. 47.00 supply & fixing in repair vitreous china urinal pot white including partition, waste pipe, screw with wall fixing complete all as specified and as directed. 48.00 s&f in repairs two way wall mixer with popup waste system, hot and cold facilites and 450 mm long braidaed hoses chromium plated complete all as specified and as directed . 49.00 s&f in repair health faucet with double lock 1 meter brass plated stainless steel flexible hose and wall hook complete all as specified and as directed. 50.00 s & f in repair copper alloy cp toilet paper holder complete all as specified and as directed. 51.00 m&l for replacement of 100mm ci floor/nahani trap with grating including jointing and breaking/ dismantling any type of floor and making good cement concrete type b-1 (1:2:4) and testing after repairs and taking down existing trap etc complete all as specified and as directed. 52.00 s&f in repair, brass chromium plated tubular towel rail, 20mm dia, d type, 60cm long between flanges complete all as specified and as directed. 53.00 taking up or down 15mm steel tubing and connections in walls, ceilins, floors, etc including cleaning for refixing or removal to store complete all as specified and as directed. 54.00 m&l for gi tubing, 15mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed. 55.00 m&l for cutting chases, pinning in making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc, and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good cutting not exc 10 cm girth as in wall complete all as specified and as directed. 56.00 s&f in repair 15mm bore cast copper alloy, cp angle cock, screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. 57.00 s&f in repair pvc connections 15mm size with ptmt nuts of length 450mm and fixed complete all as specified and as directed. 58.00 s&f in repairs pvc connections 15mm size with ptmt nuts of length 600 mm and fixed complete all as specified and as directed. 59.00 s&f in repair cast copper alloy cp soap dish complete all as specified and directed. 60.00 s&f in repair bib taps with wall flange 15mm bore, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. 61.00 s&f in repair pillar cock, foam flow cast copper alloy, chromium plated, fancy type, 15 mm dia, capastan heads, screwed down high pressure complete all as specified and as directed. make:- cat no 8304 of make prayyag or equivalent as per list of makes. 62.00 s&f in repair plastic water closet seat cover, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. 63.00 s&f in repair pvc valveless, syphonic action type, flushing cistern low level, 10 litre capacity , white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed. 64.00 s&f in repair 610 mm long pvc waste pipe flexible type 25 mm dia suitable for couplings 32 mm / 40 mm dia complete all as specified and as directed. 65.00 s&f in repair (600 x450) mm fancy type or bevelled edge mirror of selected quality glass, mounted on 6mm thick ac building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. 66.00 s&f in repairs 15 mm bore bib taps standard of ptmt any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed. (minimum weight 90 gms). 67.00 s&f in repairs 15 mm two in one angle valve cast copper alloy, chromium plated with wall flange and fancy type with high pressure screwed down and with cp flange of same make complete all as specified and as directed . 68.00 m&l for 18-20mm thick granite (of jet black ) work (table rubbed and polished ) in steps, jambs, pillars, window cills, cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. note:- the cost of half round moulding shall be deemed to be included in unit rate. 69.00 dismantalling water tanks and removal from site of capacity exc 250 ltr and not exc 500 ltr complete all as specified and as directed. 70.00 m &l for 500 litres capacity rotational moulded polyethene water storage tank (cylindrical vertical with closed top), white, three layers, hoisted and fixed in position complete all as specified and as directed. 71.00 supply and fixed ball brass valve high pressure with polythene float and fly nut complete to bore of pipe 20mm complete all as specified and as directed. 72.00 demolition of brick work or stone buillder built in cement mortar of any description complete all as specified and as directed. 73.00 m&l for brick work with sub class b works, straight or curved on plan exceeding 6m mean radius, built in cement mortar (1:6) complete complete all specified and as directed. 74.00 dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. 75.00 s&f mild steel work such as angle iron post, flat iron in fencing including cutting as making doubble swan neck i.e. y shaped including welding with proper overlapping & welding ms plate with angle iron bottom as directed, drilling holes notching for wire etc embedded in concrete fixed vertically conforming to fe 290 grade e-165 complete all as specified and as directed. note:- embedded portion of angle iron post shall be treated with tar of coat of tar black paint and cost of the same shall be deemed to be included in unit rate. 76.00 m&l for preparation of newly steel surfaces of any description over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer of any height complete all as specified and as directed. 77.00 s&f for concertina coil with punched tape of 600 mm dia (when stretched), centre core wire of minimum 2.5 mm dia of mild steel wire conforming to is 280-2006 with galvanised coating of steel concertina coil as per requirements laid down for medium coated wire in is : 4826 hot dipped galvainsed coating of round steel wires. conretina coil shall be fixed in diamond shape with the help of dovetail two handle and spikes shall be fixed at both end of coil,minimum straight length of the wire 150 rm for 10 rm of work ,minimum weight 13.5 kg for 10 rm of work including dismantling of existing concertina coil complete all as specifed and directed by engr-in-charge. (note:- the actual weight of concertina coil brought by the contractor at site shall be ascertained by boo as ordered by ge). 78.00 s&f for concertina coil with punched tape of 900 mm dia (when stretched), centre core wire of minimum 2.5 mm dia of mild steel wire conforming to is 280-2006 with galvanised coating of steel concertina coil as per requirements laid down for medium coated wire in is : 4826 hot dipped galvainsed coating of round steel wires. conretina coil shall be fixed in diamond shape with the help of dovetail two handle and spikes shall be fixed at both end of coil,minimum straight length of the wire 180 rm for 10 rm of work ,minimum weight 16.5 kg for 10 rm of work including dismantling of existing concertina coil complete all as specifed and directed by engr-in-charge. (note:- the actual weight of concertina coil brought by the contractor at site shall be ascertained by boo as ordered by ge). 79.00 dismantling of fencing wire, barbed wire any type and description complete all as specified and as directed. 80.00 supply and fixing galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2 mm dia barbed of 75mm spacing and straining and fixing to any type of standard rail, straining bolt including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc as directed (each line wire to be measured) complete all as specified and as directed. 81.00 m&l for cuting holes in brick walls exc half brick but n.exc one brick, built in cement mortar for fixing holdfasts in jambs of existing opening and making good complete all as specified and as directed. 82.00 m&l pcc (1:3:6) type c1 (using 20 mm graded stone aggregates) as in hold fast block including necessary form work complete all as specified and as directed. 83.00 s&f mild steel work framed such as grill, gratings, etc with ends of bars shouldered and /or riveted, or forged into spikes, framed guard bars barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to fe.290.gde-e-165. complete as specified and as directed. 84.00 dismantling of fencing wire mesh, any type of any description complete as specified and as directed. 85.00 fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete as specified and as directed. 86.00 supply only chain link ms galvanised fencing, 4mm dia gi wire mesh size 100mm x 100mm complete as specified and as directed. 87.00 s&f mild steel screw bolts 12 mm dia (machine made) with hexagonal heads at one end and screwed other end to be fitted with washers (02 nos.) and one hexagonal nut, length of bolt exe 5 cm and n exe 10 cm complete as specified and as directed. 88.00 s&f mild steel fabricated round bars 10mm dia as in horizontal bars for chain link fencing incl necessary hooking at ends all as complete as specified and as directed. 89.00 excavation in post hole (or similar holes) each n.exc 0.50 cum getting out returning, filling in and ramming earth around in layers n. exc 25cm watering and removed surplus soil to a distance n. exc 50m and making good surface in soft/loose soil complete as specified and as directed. 90.00 supply and fixing in repairs, pre cast cement concrete jallies, 35 mm thick, type b0 1:2:4 (using 12.5 mm graded crushed stone aggregate) including wire fabric set and jointed in cement mortar (1:4) complete as specified and as directed. 91.00 s&f in repair aluminium composit panel (acp) sheet with 1x1.5 aluminium tube over the framed/ beam of gates. acp shall meet under mentioned technical requirements:- (i) coating on front : high quality polymer resin.(ii) core : fr core (fire retardant)(iii) thickness : 4mm(0.5 mm+3.0mm+0.5mm) (iv) weight : 7.50kg/sqm(v) width: 1200mm(vi) length: 1200 to 2400mm(vii) structure: aluminium panel are protective film,clear coating pvdf,primer coating,antirust layer,aluminium skin and polyethylene.(viii) temp resistance : between -50c to +80c(note:- the quoted rate is deemded to be included necessaryy scaffolding required and joint sealing) 92.00 s & f in repair 12mm thick toughened glass fixed with double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other party made of mild steel heavy duty and stainless steel handle purpose made on both side with locking machanism and with necessary stopper etc complete all as specified and as directed. 93.00 demolition and breaking up drain pipe 75/100mm dia ( salt glazed ware, ac or pvc) of any type complete all as specified and as directed. 94.00 s&f 75 mm dia pvc (swr) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps after every one meter of interval complete all as specified and as directed. 95.00 s&f 110 mm dia pvc (swr) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps after every one meter of interval complete all as specified and as directed. 96.00 s&f in repairs pvc(swr) bends any radius, 75 mm bore complete all as specified and as directed. 97.00 s&f in repairs pvc(swr) bends any radius, 110 mm bore complete all as specified and as directed. 98.00 hacking out old broken glass (any thickness, size, quality or description) from wooden frames or steel, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed. 99.00 s&f sheet glass 4mm thick ordinary quality and glazing with oil putty or rubeer bedding in square n. exc 0.5 sqm in each pane complete all as specified and as directed. 100.00 s&f in repairs of sink with drainage board, made out of stainless steel 1mm thick, kitchen or laboratory with plugs, washes and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe over all size (915x460)mm with bowl size (410x330x160)mm complete all as specified and as directed. 101.00 s&f in repair brass chromium plated shower rose,125 mm size fixed to 15 mm bore iron pipe complete all as specified and as directed. 102.00 s&f in repair water closet vitreous china squatting pan, orissa pattern size (580x440)mm white with integral foot rests (excluding flushing cistern and flush pipe) and including with p or s trap complete including provison of lime concrete bedding fixed in repair complete all as specified and as directed. 103.00 m&l for gunniting work to rcc work in column, flooring, side walls, beam, slab, etc by removing loose concrete cover etc, cleaning of surface with wire brush and applying epoxy paint to rusted reinforcement and s&f welded wire mesh fabric or wire net less than 95 x 95x 3 mm tied to existing reinforcement with nails,adhesive plaster grade for concrete and providing gunniting pressure 2.0/2.5kg/sqm with admixture 1 part of cement and 3.5 part of sand with average thickness 40 mm and making the surface even including 15mm thick plastering in cm 1:4 on brick or concrete surfaces including finishing the surfaces even and smooth, without using extra cement including necessary form work to be carried out,complete all as specified.(note.- wherever reinforcement required shall be measured and paid seperately) 4. structural steel steel authority of india limited (sail) brand: sail / rashtriya ispat nigam limited (rinl) brand: rinl / tata iron & steel company (tisco, or tata steel) brand: tata / m/sjindal steels and power ltd. brand: jindal 5 factory made paneled/ glazed /gauged door shutters m/s mp wood product indore, m/s jain doors pvt ltd sonipat, goyal industiral corporation new delhi, shri krishna industries, panchkula, 6 factory made flush door shutters m/s green ply industries, m/s centuary ply, m/s dura ply. mysore chip board, archid, swastik ply wood, m/s jain doors pvt ltd 7 pvc door frame/shutters sintex, rajshri plastiwood ltd, m/s dura plast extraction pvt ltd, m/s fenesta, ecocell,accucell 8 frp door frame and shutter selected products co., sintex, rajshri plastiwood ltd, accure polytec pvt ltd ,ecocell, fiberways 9 upvc window/doors fenesta, ncl veka, madhu industries, h2o solutions, yashpoly,accucel, okotech, aseco (m/s ashish industries) 10 iron mongery mowjee, m/s kitch architectural product pvt ltd, rs industries. 11 hydraulic door closer everest, universal, godrej 12 particle board(veneered & unveneered laminated)/ block board kitply, nova pan industries, new delhi, m/s green ply industries ltd, archid ply, bhutan board, dura board mysore chip board ltd 13 plywood for general purposes dura ply, archid ply, bhutan board,archid board, century, durian, mysore chip board ltd 14 decorative laminates archid lam, sunmica, merino, lam, mysore chip board,greelam 15 terrazzo tiles ntc, nitco, eurocon, duracrete 16 glazed ceramic/non skid wall/floor tiles kajaira, johnson, agl, qutone , somany, nitco, orient bell ,vitero, sunhearrt ceramik, varmora 17 vitrified tiles (polished, unpolished & glazed, normal/ anti skid) kajaira, johnson, agl, qutone , somany, nitco, orient bell,vitero,sunhearrt ceramik, varmora 18 hdpe storage water tanks sintex, supreme,plasto,polycon 19 sanitary appliances /fittings(chinaware) hindware,parryware,cera,jaquar, kohler, prayag aproyale,somany 20 water closet seats and cover (solid bakelite) thermostat moulded toilet seat cover parryware, jaquar, prayag somani,commander,cera,neycer 21 pvc flushing cisterns hindware, commander, parryware, cera ,jaquar, johnson pedar, neycer 22 stainless steel kitchen sink with or without draining board, plate rack nirali,cera,diamond,jainco,shakti prayag, (silver shine) m/s bluestar sanitary industries 23 ball valves (horzontal plunger type) dripless faucets india, flowjet , ball valves inida. 24 shower roses chromium plated (swivel type) gem,jaquar, jal 25 bath room fancy fittings jaquar,gem,marc, jalangi 26 bib taps and stop taps (cp),pillar tap, fancy fittings jaquar, parko, gem, marc 27 bathroom cabinets jaquar, cera, commander, parryware .... more in document

Central Government/Public Sector

TRN :49055191 | 05 Jun, 2025

Tender Value : 7.92 Crore

Deesa - Gujarat

Tender for tender for provn of fencing and gate at af stn deesa (ph-ii); 1 b/r works 2 site clearance of area including shrubs, vegetation, grass, bush, weed, trees and saplings n. exc. 30 cm girth complete all as specified and directed. 3 excavating in post hole each n exc. 0.50 cum, getting out in soft/loose soil including returning, filling in and ramming earth or broken rubble mixed with earth around, in layer not exc. 25 cm, watering including clearing away all grass vegetation, saplings, shrubs, brushwood, undergrowth, roots and trees n. exc. 30 cm girth (measured one meter above ground level) and removing rubbish/ surplus soil upto a distance of 50 meters outside and making good surface complete all as specified and directed.note : necessary dewatering of water if requried shall be included in the unit rate of item. 4 excavation in trenches, n nexc 1.5m wide and n. exc 1.5 m in depth, for foundation manholes, wells, drain etc.getting out in soft/loose soil including clearing away all grass vegetation, saplings, shrubs, brushwood, undergrowth, roots and trees n. exc. 30 cm girth (measured one meter above ground level) and removing rubbish/ surplus soil upto a distance of 50 meters outside complete all as specified and directed. 5 m & l for cement concrete 1:2:4 type b-1 (20 graded stone aggregate) as in post holes includingcompaction by vibratorcomplete all as specified and directed. 6 m & l for cement concrete 1:4:8 type d-2 ( 40 mm aggregate)in foundations, filling and mass concrete complete all as specified and directed. 7 s & f mild steel work as in fencing posts and struts in fencing including cutting tops of shape as directed, drilling holes, notching for wire, etc.,flat iron fillets and round bars with hooks at ends (for securing wire mesh etc.) incl all necessary drilling, bolting or riveting, etc, and similar work confirming to fe -290 gde e-165 complete all as specified and directed. 8 supply only chain link ms galvanised fencing, any size or type complete all as specified and directed. note :i) chain link of mesh size preferably 100 mm mesh 10 gauge thickness will be provided, however the size may be changed after written approval of ge.ii) the weight of chain link fencing shall be ascertained by boo ordered by ge 9 fixing only chain link fencing including line wires,any mesh,size and type to any type of standards,rails,straining bolts,etc. including provision of binding wire complete all as specified and directed. note : chain link of mesh size preferably 100 mm mesh 10 gauge thickness will be provided,howeverthe size may be changed after written approval of ge. 10 s & f 5-10 mm diameter of shank mild steel screw bolts ( machine made) with hexagonal or square heads at one end and screwed the other,or screwed both ends.each screwed end to be fitted with washers and one hexagonal or square nut, n exc. 5 cm long complete all as specified and directed. 11 m & l for mild steel work 10 mm dia round bars as in fencing cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. 12 s & f galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, complete all as specified and directed. (each line wire to be measured) 13 material & labour for 610 mm dia punched tape concertina coil fencing stretches ( supporting wire of the same material as concertina coil ) having stranding specifications average weight not less than 1.06 kg/m incl coating of px2 compound (anti rust) and fixed in angle iron brackets on compound wall/ fencing with and including all scaffolding if required complete all as specified and directed. 14 m&l preparation of new steelsurfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. 15 m & l for new steel primed surfaces of any description, n.exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. 16 m&l brick work with sub class b bricks straight or curved on plan exceeding 6m mean radius bulit in cm 1:6 complete all as specified and directed. 17 m&l for cement concrete (1:2:4) type b-0 using 12.5 mm graded aggregate as incopingetc. including weathering, slighty rounded or chamfered angle including necessary form work complete all as specified and directed. 18 m&l rendering 10mm thickin cement mortar 1:6 on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. 19 m & l, two coats of cement based paint over one coat of alkali resistant primer in including preparation of new surface (preparing surfaces plastered or unplastered) on internal wall complete all as specified and directed. 20 s&f 110 mm bore pvc (swr) pipes single socketed in any length with rubber ring joints fixed to walls as in weep holes complete all as specified and directed. 21 m&l rcc m-25 (20mm graded aggregates) work as in foundation, including rafts, footing beam etc. complete all as specified and directed. 22 m&l rcc m-25 (20mm graded aggregates) work as in columns, pillars, piers, post and struts etc. complete all as specified and directed. 23 m & l for form work to side of concrete foundation, footing, bases of columns, raft sides and soffits (if any) of foundation and plinth beams with fair finish surface etc.complete all as specified and directed. 24 m & l for form work to sides of column with fair finished surface of concrete etc complete all as specified and directed. 25 m & l for mild steel bars (tmt) 10 mm dia and over, cut to lenth bent to shape required, including cranking bending spirally for hooping for columns hooking end and binding with steel wire or sequring with clips complete all as specified and directed. 26 m & l for mild steel bars (tmt) 8 mm dia and over upto and including 10 mm dia in stirrups, spaces and binder as in column complete all as specified and directed. 27 s&f steel sections fe-290(gde-e-165) forframed work as in doors or gates of angle or other section with gusset plates , rails, braces with ornamental and intricate design complete,drilled for fixing of steel sheeting or other covering. door, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fiftting (exc. of steel sheeting or other covering ,running rails and guides ) and hanging ; also fastening and fixing complete all as specified and directed. 28 m& l 20mm thick granite (of any type) work in steps, jambs,clading topillars, window-cills, cooking plateform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite and 20mm thick screed bed in cm 1:4 complete all as specified and directed. 29 returning, filling in, including spreading, levelling, watering and well ramming in layer not exc 25 cm complete all as specified and directed. 30 rough excavation not exceeding 1.5 m deep and getting out in soft/ loose soil complete all as specified and directed. 31 forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/ rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base complete all as specified and directed. 32 removing excavated material ( soil ) exc 250m but n. exc. 500mand depositing where directed complete all as specified and directed. 33 m&l framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar workconforming to fe.290.gde-e-165 complete all as specified and directed. 34 e/m works 35 s & fjunction boxes madeup of crca sheet 2 mm thick of the 300 mm x 300 mm x 150 mm complete all as specified and directed. 36 s & f rigid non-metallic pvc conduit 20 mm dia exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed. 37 s & f for galvanised of 50 mm bore tubes, light grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

State Government

TRN :49055818 | 21 May, 2025

Tender Value : 7.81 Lacs

24 Paraganas South - West Bengal

Tender for settler with abr at ramchandrapur near rabin mudi shop- 1 earth work excavation of foundation trenchs or drain in all sorts of soil including mix soil excluding laterite or sand stone includinga) depth of excavation not exceeding 1,500 mm 2 (b) depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring. 3 (a) filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) 4 single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. 5 ordinary cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant is codes. (i) pakur variety 6 ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant is codes.(i) pakur variety 7 ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant is codes.(i) pakur variety 8 reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) for works in foundation and upto roof of ground floor/upto 4 m (i) tor steel/mild steel i. sail/tata/rinl 9 hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) 10 brick work with 1st class bricks in cement mortert(1:4) a)in foundation and plinthb) in super structure, in all floor. 11 plastering at wall with sand and cement morterincluding rounding off or chamfaring corner (1:6) 20 mm th. 12 net cement punning about 1.5 mm thick in wall dado window floor drain etc. 13 supply of upvc pipes (b type) & fittings conforming to is-13592-1992.(a) (i) single socketed 3 meter length (b) 110 mm inlet/outlet of hpgf 14 labour for fitting and fixing u.p.v.c. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or r.c. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the engineer in-charge. (payment will be made on centre line measurement of the total pipeline including specials.(a) above ground (ii) 110 mm dia. 15 supply of upvc pipes (b type) & fittings conforming to is-13592-1992.(b) fittings (ii) plain tee (b) 110 mm 16 supplying, fitting and fixing in position c.i. manhole/ pit cover with rim. (b) square- 600 mm x 600 mm x 50 kg (approx.) 17 supply of upvc pipes (b type) & fittings conforming to is-13592-1992. providing & supplying cowl 18 c.i. sluice valve with flanged ends drilled to as per i.s. 1358/62 and having all cast iron components as per i.s. 780/71 solid forged bronze inside screw spindle having ultimate tensile strength not less than 4.72 mt per sq. cm. spindle nut valve and seat faces of hard wear resisting, manufactured from best quality gunmetal conforming to i.s. 780/71, painted black all over with asphalt base paint tested to 21 kg (hydraulic pressure) per sq. cm., valve opening to anticlockwise direction, fitted and fixed complete. 19 providing and laying of filter media with granularmaterials/stone crushed aggregates/brickaggregates /river bed materials satisfying therequirements laid down in clause 2504.2.2 of mort&h 20 earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (payment to be made on the basis of measurement of finished quantity of work)(a) with earth obtained from excavation of foundation 21 surfacedressingof the ground inany kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed. 22 18% cgst & sgst 23 1 % labour cess

State Government

TRN :49055823 | 21 May, 2025

Tender Value : 4.49 Lacs

24 Paraganas South - West Bengal

Tender for settler with abr at uttar ramchandrapur near gul company- 1 earth work excavation of foundation trenchs or drain in all sorts of soil including mix soil excluding laterite or sand stone includinga) depth of excavation not exceeding 1,500 mm 2 (b) depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring. 3 (a) filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) 4 single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. 5 ordinary cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant is codes. (i) pakur variety 6 ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant is codes.(i) pakur variety 7 ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant is codes.(i) pakur variety 8 reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) for works in foundation and upto roof of ground floor/upto 4 m (i) tor steel/mild steel i. sail/tata/rinl 9 hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) 10 brick work with 1st class bricks in cement mortert(1:4) a)in foundation and plinthb) in super structure, in all floor. 11 plastering at wall with sand and cement morterincluding rounding off or chamfaring corner (1:6) 20 mm th. 12 net cement punning about 1.5 mm thick in wall dado window floor drain etc. 13 supply of upvc pipes (b type) & fittings conforming to is-13592-1992.(a) (i) single socketed 3 meter length (b) 110 mm inlet/outlet of hpgf 14 labour for fitting and fixing u.p.v.c. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or r.c. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the engineer in-charge. (payment will be made on centre line measurement of the total pipeline including specials.(a) above ground (ii) 110 mm dia. 15 supply of upvc pipes (b type) & fittings conforming to is-13592-1992.(b) fittings (ii) plain tee (b) 110 mm 16 supplying, fitting and fixing in position c.i. manhole/ pit cover with rim. (b) square- 600 mm x 600 mm x 50 kg (approx.) 17 supply of upvc pipes (b type) & fittings conforming to is-13592-1992. providing & supplying cowl 18 c.i. sluice valve with flanged ends drilled to as per i.s. 1358/62 and having all cast iron components as per i.s. 780/71 solid forged bronze inside screw spindle having ultimate tensile strength not less than 4.72 mt per sq. cm. spindle nut valve and seat faces of hard wear resisting, manufactured from best quality gunmetal conforming to i.s. 780/71, painted black all over with asphalt base paint tested to 21 kg (hydraulic pressure) per sq. cm., valve opening to anticlockwise direction, fitted and fixed complete. 19 providing and laying of filter media with granularmaterials/stone crushed aggregates/brickaggregates /river bed materials satisfying therequirements laid down in clause 2504.2.2 of mort&h 20 earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (payment to be made on the basis of measurement of finished quantity of work)(a) with earth obtained from excavation of foundation 21 surfacedressingof the ground inany kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed. 22 18% cgst & sgst 23 1 % labour cess

State Government

TRN :49056564 | 21 May, 2025

Tender Value : 7.81 Lacs

24 Paraganas South - West Bengal

Tender for settler with abr at dakshin ramchandrapur near tarun sangha shiv mandir- 1 earth work excavation of foundation trenchs or drain in all sorts of soil including mix soil excluding laterite or sand stone includinga) depth of excavation not exceeding 1,500 mm 2 (b) depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring. 3 (a) filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) 4 single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. 5 ordinary cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant is codes. (i) pakur variety 6 ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant is codes.(i) pakur variety 7 ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant is codes.(i) pakur variety 8 reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) for works in foundation and upto roof of ground floor/upto 4 m (i) tor steel/mild steel i. sail/tata/rinl 9 hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) 10 brick work with 1st class bricks in cement mortert(1:4) a)in foundation and plinthb) in super structure, in all floor. 11 plastering at wall with sand and cement morterincluding rounding off or chamfaring corner (1:6) 20 mm th. 12 net cement punning about 1.5 mm thick in wall dado window floor drain etc. 13 supply of upvc pipes (b type) & fittings conforming to is-13592-1992.(a) (i) single socketed 3 meter length (b) 110 mm inlet/outlet of hpgf 14 labour for fitting and fixing u.p.v.c. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or r.c. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the engineer in-charge. (payment will be made on centre line measurement of the total pipeline including specials.(a) above ground (ii) 110 mm dia. 15 supply of upvc pipes (b type) & fittings conforming to is-13592-1992.(b) fittings (ii) plain tee (b) 110 mm 16 supplying, fitting and fixing in position c.i. manhole/ pit cover with rim. (b) square- 600 mm x 600 mm x 50 kg (approx.) 17 supply of upvc pipes (b type) & fittings conforming to is-13592-1992. providing & supplying cowl 18 c.i. sluice valve with flanged ends drilled to as per i.s. 1358/62 and having all cast iron components as per i.s. 780/71 solid forged bronze inside screw spindle having ultimate tensile strength not less than 4.72 mt per sq. cm. spindle nut valve and seat faces of hard wear resisting, manufactured from best quality gunmetal conforming to i.s. 780/71, painted black all over with asphalt base paint tested to 21 kg (hydraulic pressure) per sq. cm., valve opening to anticlockwise direction, fitted and fixed complete. 19 providing and laying of filter media with granularmaterials/stone crushed aggregates/brickaggregates /river bed materials satisfying therequirements laid down in clause 2504.2.2 of mort&h 20 earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (payment to be made on the basis of measurement of finished quantity of work)(a) with earth obtained from excavation of foundation 21 surfacedressingof the ground inany kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed. 22 18% cgst & sgst 23 1 % labour cess

Co-operative

TRN :49063237 | 20 May, 2025

Tender Value : 4.00 Lacs

Muzaffarnagar - Uttar Pradesh

Tender for hardware and general goods , hardware general goods , acc make quick setting compound simcom 30 , alluminium rivit all size , alluminium sheetall size , anabond 666 , angle grinder complet 4raliwolf make , anti seage spray , araldite in 1.80 kg , bearing sleave s k f make no-99435 siz3-110 mm , bearing sleave size h-3144 special size id 198 mm , bearing sleave size h-3144 special size id 198.20 mm , bearing sleeve jmc make all size less discount on company price list , belt fastner no 35 , blue tube in pack of 15 mm , boiler gauge galass 3/4 x 17suitable for very high pressore & hightemp.bishap make , boiler gauge galass 3/4 x 20 1/2suitable for very high pressore & hightemp.bishap make , boiler gauge galass 3/4 x 42suitable for very high pressore & hightemp.bishap make , boler gauge glass sleeveleader make less discount on company price list , bosch make angle grinder ag-4 , bosch make angle grinder ag-7 , brass conector 6 mm , brass conector 10 mm , brass ferrule 10 mm , brass ferrule 6 mm , brass nut 10 mm , brass nut 3 mm , brass nut 6 mm , brass rod all size , brass washer all size , brasso liqued in tin of 100 ml , hindustan make rubber conveyor flat belt (straight grade m-24,4 ply, 12 mm, 5mm top and 3mm bottom size356 mm(14) width , hindustan make rubber conveyor flat belt (straight grade m-24,4 ply, 12 mm, 5mm top and 3mm bottom size 406 mm(16) width , hindustan make rubber conveyor flat belt (straight grade m-24,4 ply, 12 mm, 5mm top and 3mm bottom size 508 mm(20) width , hindustan composite make break liner size 3/8x7 , hindustan composite make break liner size 3/4x9 , hindustan composite make break liner size 3/8x9 , hindustan composite make break liner size 1/2x5 , hindustan composite make break liner matalical copper wiresize 1/2x9 x 1mtr , hindustan composite make breack linner 1/2x7 , hindustan composite make breack linner 1/2x9 , c i cock valve 1 , c i spring loaded angle valve 150 mm (safty valve) with following specification1 ss 410 spindle,s s 304 body seat,ss 304 flap, flap seat of epdm rubbersuitable for 160 c , c.i /g.m.wheel valve, butter flyvalve , & cock valve all size sant make as per company previling price list , c.i /g.m.wheel valve, butter flyvalve , & cock valve all size sant make less discount as per company previling price list , c.i.pulley 10 c section 4 groove 1 pilot bore , c.i.pulley 14odxb section 3 groove 1 bore , c.i.pulley b section size 9 groove 1 , c.i.pulley section size 14 groove 1 , c.i.sluice valve non rising spindle isi marked aisi-410 spindle gun metal working parts is 14846:2000 size 10 , c.i.sluice valve non rising spindle isi marked aisi-410 spindle gun metal working parts is 14846:2000 size 12 , c.i.sluice valve non rising spindle isi marked aisi-410 spindle gun metal working parts is 14846:2000 size 2 , c.i.sluice valve non rising spindle isi marked aisi-410 spindle gun metal working parts is 14846:2000 size 3 , c.i.sluice valve non rising spindle isi marked aisi-410 spindle gun metal working parts is 14846:2000 size 4 , c.i.sluice valve non rising spindle isi marked aisi-410 spindle gun metal working parts is 14846:2000 size 5 , c.i.sluice valve non rising spindle isi marked aisi-410 spindle gun metal working parts is 14846:2000 size 6 , c.i.sluice valve non rising spindle isi marked aisi-410 spindle gun metal working parts is 14846:2000 size 8 , c.s valve all size w.j.make less discount as per company previling price list , c.s.valve all size audco makeless discount as per company previling price list , camel hair belt 1/2 x 12 , camel hair belt but 1/2 x 10 , canvas hose pipe 63 mm x 15 meter with male femal coupling isi mark (insulated 14 bar) , canvas hose pipe 63 mm x 30 meter with male femal couplingisi mark (insulated 14 bar) , carbide tip tool size 1/4x8 sq , carbon steel seamless long bend sch-40, ibrapproved with mtc size1 1/2 , carbon steel seamless long bend sch-40, ibrapproved with mtc size 1 , carbon steel seamless long bend sch-40, ibrapproved with mtc size 1/2 , carbon steel seamless long bend sch-40, ibrapproved with mtc size 2 , carbon steel seamless long bend sch-40, ibrapproved with mtc size 3/4 , carbon steel seamless steamlong bends astma-106 grade inschedule -40 ibr approved with mtc size 125 mm nb , carbon steel seamless steamlong bends astma-106 grade inschedule -40 ibr approved with mtc size 150 mm nb , carbon steel seamless steamlong bends astma-106 grade inschedule -40 ibr approved with mtc size 20 mm nb , carbon steel seamless steamlong bends astma-106 grade inschedule -40 ibr approved with mtc size 25 mm nb , carbon steel seamless steamlong bends astma-106 grade inschedule -40 ibr approved with mtc size 38/40 mm nb , carbon steel seamless steam long band astm a-106 grade sch -40 ibr with mtc size 15mm , carbon steel seamless steam long band astm a-106 grade sch -40 ibr with mtc size 50mm , carbon steel seamless steam pipe line astma-106 grade inschedule -40 ibr approved with mtc msl make all size as per company prevaling price list , carbon steel steam pipe astm a-106 grade sch -40 ibr with mtc size 15mm , carrage bolt size 3/8x2 1/2 , carrage bolt size 3/8x2 1/2 , cast iron diapharam valve rubber blind size 2 , cast iron foot valve flange type heavy duty size 6 , chain pulley block cap.01ton.indef make with sd lift (p model) , chain pulley block cap.02 ton.indef make with sd lift (p model) , chain pulley block cap.03 ton.indef make with sd lift (p model) , chain pulley block cap.05 ton.indef make with sd lift (p model) , coir stringall size , conveyer rubber belt 1000mmwidth 5 mm top 2mm bottom 8 mm thickness 3 ply nylon m 24 grade hindustaan make , conveyer rubber belt 500mm width 3ply 3mm top 1.5mm bottom m24 grade strengh 315/3hindustaan make , copper molicoat past , copper pipe all size , copper pipe od 10 mm x id 7 mm , copper rivit round head size 5/32x1/2 , copper sheet size 4x4 x 1.5 mm , cotton waste but coluread , cotton waste wihte dust free , counter meter 6 digit heavy duty , csk bolt size 3/4 x 4 , csk bolt size 3/4 x 6 , d cycle 3/4 , c.i.pulley b section size 14 groove 1 , c.i.pulley b section size 9 groove 1 , c.i.pulley but 1/2 x 10 , c.i.pulley but 10 c section 4 groove 1 pilot bore , c.i.pulley but size 1/4x1/4 , c.i.pulley c section size 9 groove 1 , dog chuk double sloth.dutysize- 12 , drillchuck size 1/2 , drillchuck size 3/4 , drill socket set size 0-4 , du chain diamond make 1-1/2 less discount as per company prevaling price list , e.n -8 shaft all size , e.n -8 shaftt with ultrasonic t.c , e.n -9 shaft all size , e.n -9 shaft with ultrasonic t.c , emery cloth in 500 sheet but fine , emery cloth in 500 sheet rough c.u make , emery past 400 gm but fine , emery past 400 gm roughc.u.make , emery tape 50 mtr roll 1 1/2lbut fine , emery tape 50 mtr roll 1 1/2 rough c.u make , emery tape 50 mtr roll 2 rough c.u make , emery tape 50 mtr roll 2t fine , erw tube for super heated wash water column tub size od 20mm x id 15mmapprox 6 to 7.5 mtr , erw tube for super heated wash water column tube od 16mm id 12mm length approx 6 to 7.5 mtr , expande; metal 50x4 , expandeble; material for sulpher furnace size burfi 25 mm wire thck 3 mm , extra chain forchain pulley block cap.01ton.indef make with sd lift (p model) above , extra chain chain pulley block cap.02 ton.indef make with sd lift (p model) , extra chain chain pulley block cap.03 ton.indef make with sd lift (p model) , extra chain chain pulley block cap.0 5ton.indef make with sd lift (p model) , filler gauge size 9 , fire bucket , flate belt all size goodyear makeless discount on as per company prevaling price list , flow meter 4 (cold ) up to 40 c temp , flow meter 4 (hot ) up to 100 c temp , flow meter 6 (cold ) up to 40 c temp , flow meter 6 (hot ) up to 100 c temp , forbes marshall make thermo dynamic steam trap td3 socket weld size 1 , forbes marshall make thermo dynamic steam trap td3 socket weld size 3/4 , forged m.s.socket size 3/8 bsp , four jaw chuck double slots size 12 gmt make , g i bolt with nut 10x100 mm , g i bolt with nut 10x65 mm , g i pipe 2 c class heavy duty , g i plate 2x2 x6mm thik earthing , g i strip size 1/4 x2 , g i washer 10 mm , g m rod all size , g.i bolt galavnisd 1/2 x 5 , g.i. washer 1/2 , g.i.nut galavnisded 1/2 , g.i.wire 16 swg , gasket shallac compound 25 gm tube , gauge glass cock set (broze gauge glass cock set) , gear coupling all size fenner make discountas per company prevaling price list , gmt make 4 jaw chuck double slot for leath machine 12 , gmt make 4 jaw chuck double slot for leath machine size 24 , graphite powder 1/2 kg pack , high pressure wire braided felxible hose pipe withconnectto size 1/2 x 1/2mtr , high pressure wire braided felxible hose pipe withconnectto size 1/2 x 21/2 ft , high pressure wire braided felxible hose pipe withconnectto size 1/4 x 1mtr , high pressure wire braided felxible hose pipe withconnectto size 1/4 x 1 1/2ft , high pressure wire braided felxible hose pipe withconnectto size 1/4 x 1 1/2 mtr , high pressure wire braided felxible hose pipe withconnectto size 1/4 x 1/2 mtr , high pressure wire braided felxible hose pipe withconnectto size 3/4 x 1/2 mte , high pressure wire braided felxible hose pipe withconnectto size 3/4 x 11/2 mte , high pressure wire braided felxible hose pipe withconnecttor - but size 1/2 x 1 mtr , high pressure wire braided felxible hose pipe withconnecttor - but size 1/4 x 1 1/2ft , high pressure wire braided felxible hose pipe withconnecttor but size 1/2 x 11/2 mte , high pressure wire braided felxible hose pipe withconnecttor- but size 1/2 x 1 ft , high pressure wire braided felxible hose pipe withconnecttor- but size 1/2 x 1/2mtr , high pressure wire braided felxible hose pipe withconnecttor but size 1/2 x 21/2 ft , high pressure wire braided felxible hose pipe withconnecttor- but size 1/4 x 1 1/2 mtr , high pressure wire braided felxible hose pipe withconnecttor- but size 1/4 x 1/2 mtr , high pressure wire braided felxible hose pipe withconnecttor- but size 3/4 x 1 mte , high pressure wire braided felxible hose pipe withconnecttor size 3/4 x 3 mtr , holdite compound in 1/2 kgpack , hose pipe clamp 1 1/2 , hose pipe clamp 1 , hose pipe clamp 1/2 , hose pipe clamp 2 , hose pipe clamp 3 , hose pipe clamp 3/4 , hose pipe clamp but 1 1/2 , hose pipe clamp but 1 , hose pipe clamp but 10 mmx6mm id , hose pipe clamp but 2 , hose pipe clamp but 3 , hydrant valve63 mm i s i mark , hydraulicelbow both side nut ferrule 16 mm , hydraulic connector both side ferrule 16 mm , hydraulic forrul but 16 mm , hydraulic forrule size 10 mm , hydraulic hose with end connector female size 1 bsp , hydraulic jack 5 ton cap liver typeh duty , hydraulic seamless pip 10 mmx6mm id , hydraulic seamless pipe 16mm od x 12mm id , in side caliper size 8 , in side caliper size 6 , isi mark c.i non return valve flange end heavy duty size 6 , klingnt make steam joint style 1000- 3 mm metallic , knurling tool internal as per sample , lead super fine shoft flexible , lead wire 500 grm roll size 2mm , linsed oil double boiled tin 20ltr , loctic 574thread locker 250 ml , loctic 641 thread locker 50 ml , loctic thread locker 270 50 ml , m sstud size 1/2x2 1/2 , m sstud size 1/2x4 , m sstud size 10x100 mm , m sstud size 10x60 mm , m sstud size 5/8x2 1/2 , m s flange as per table dod 272 mm,pcd 234 mm holes 8 nos bore 150 mm , m s flange size 150 mm nb , m s flange size 200 mm nb , m s flange size 3 , m s flange size 4 , m s flange size 800 mm nb , m s flat 40 mm x 8 mm , m s short bent sch-40 size 1 1/2 , m s squre bas 50 x 50 mm , m.s blind flange 10 mm thick size 6 , m.s counter shankbolt size 3/4x6 , m.s flange 10 mm thick size 100 mm , m.s flange 10 mm thick size 20 mm , m.s flange 10 mm thick size 50 mm , m.s flange 10 mm thick size 80 mm , m.s flange size 1 1/2 class 300 , m.s flange size 1 1/2 class 300 , m.s long band c class size 2.5 , m.s long band c class size 3 , m.s long band c class size 4 , m.s long band c class size 6 , m.s long band c class size 8 , m.s seamless tube tested at 1000 psi size 10od x 7 id , m.s sturd size 1/2x2.5 , m.s sturd size 12mm x 65mm , m.s sturd size 16mm x 100mm , m.s sturd size 16mm x 65mm , m.s sturd size 20mm x 65mm , m.s tee 1/2 , m.s u clamp size 1 , m.s u clamp size 1/2 , m.s u clamp size 3/4 , m.s.bend 1 (short) , m.s.bend 1/2 (short) , m.s.bend 2 (short) , m.s.bend 3 (short) , m.s.bend 4 (short) , m.s.bend 5 (short) , m.s.bend 6 (short) , m.s.bend 8 (short) , m.s.perforted sheet 3 mm thick 4 x8 xhole dia 5 mm , m.s.rivit all size , m.s.sheet size 4x8 x18 swg , m.s.stud 1/2x2 , m.s.stud 1/2x3 , m.s.stud 12x75mm , m.s.stud 3/4x3 , m.s.stud 3/4x6 , m.s.stud 3/8x3-1/2 , m.s.stud 5/8x3 , m.s.stud but 1/2x3 , m.s.stud but 3/8x3-1/2 , m.s.washer all size , m.s.tube id 16 mm, od 19 mm, lenth-6000mm , m.seal 1 kg pack m & m make , marking block 18 , marking block size 12 , measuring tape fiber glass freeman make 15 mtr long , measuring tape fiber glass freeman make 3 mtr long , measuring tape fiber glass freeman make 5 mtr long , metallic oil seal on metal case 105x160x15 mm , metallic oil seal on metal case 110x130x13 mm , metallic oil seal on metal case 150x180x15 mm , metallic oil seal on metal case 150x275x87 mm , metallic oil seal on metal case 180x150x15 mm , metallic oil seal on metal case 190x220x15 mm , metallic oil seal on metal case 200x300x87 mm , metallic oil seal on metal case 250x350x87 mm , metallic oil seal on metal case 325x450x50 mm , metallic oil seal on metal case 35x57x10 mm , metallic oil seal on metal case 400x 525x50 , metallic oil seal on metal case 90x120x15 mm , metallic oil seal on metal case 250x354x87 , meter meco viberation meter km-63 complete with accessories in carring case , mkkoda make rubber oil seal all size less discount onas perco.prevlingprice list , moly cot powder 1000 , moly cot spray (400 ml can) , namda 10mm , namda 10mm , out side caliper size12 , out side caliper size 6 , p.p ball valve flange end size 2 , p.p.rope size 3/4 with t.c. , p.v.c.pipe 15 mm. , p.v.c.pipe 4 , p.v.c.pipe 6 , p.v.c.pipe but 20 mm , p.v.c.pipe but 25 mm , p.v.c.pipe but 50 mm , p.v.c. transparent pipe 15 mm. , pillow bearing p-210ntn make , pillow bearing t-210ntn make , pillow bearing p-213 ntn make , pillow bearing t-213 ntn make , plumber blockwith bearingp 207 ntn make , plumber blockwith bearingt 207 ntn make , plumber blockwith bearingt 209 ntn make , plumber blockwith bearingp 209 ntn make , plumber block all size smr make less discount as per company previling price list , power ,master make tube expender rod size 42 mm to 45mm , pvc transparent pipe 1/4 , rberised asbestostape size 3/8x 1.5 , rotex make solonoide valve 3013 single way , roto dial make gear oil pump for turbine size 1 cap 50 ltr/min , roto dial make gear oil pump size 1 1/4 cap75 ltr/min , rotodial make gear oil pump for tew make mill turbine 1-1/4 x 1-1/4 75 ltr per minute , rubber hose pipe all size dnlop make less discount as per company previling price list , rubber jointing sheet jyoti make black , rubber tyre coupling complete set size- hp-60 , rubber tyre coupling complete set size- hp-90 , rubber tyre coupling complete set size- hp-96 , rubber tyre coupling complete set size- hp-100 , rubber tyre coupling complete set size- hp-120 , rubber tyre coupling complete set size- hp-126 , rubber tyre coupling complete set size- hp-178 , rubber tyre coupling complete set size- hp-190 , rubber tyre coupling complete set size- hp-250 , rubber tyre coupling complete set size- px-100 , rubber tyre coupling complete set size- px-110 , rubber tyre coupling complete set size- px-120 , rubber tyre coupling complete set size- px-250 , rubber tyre coupling complete set size- ph-160 , rubber tyre coupling complete set size- ph-140 , rubber tyre for coupling ph --60 , rubber tyre for coupling ph --90 , rubber tyre for coupling ph -96 , rubber tyre for coupling ph -100 , rubber tyre for coupling ph -110 , rubber tyre for coupling ph -120 , rubber tyre for coupling ph -126 , rubber tyre for coupling ph -178 , rubber tyre for coupling ph -190 , rubber tyre for coupling ph -250 , rubber tyre for coupling px100 , rubber tyre for coupling px110 , rubber tyre for coupling px120 , rubber tyre for coupling px250 , rubber tyre for coupling ph160 , rubber tyre for coupling ph140 , rustoline 1/2 kg tin , s.s nipple size 1/4x 3/8 , s.s nipplet size 1/4x1/4 , s.s wire netting grade 316 x 4 mesh1 mtr x 4 mtr , s.s.ballvalve size 15 mm , s.s.ballvalve size 50 mm , s.s.ballvalvesize 20 mm , s.s.ballvalvesize 25 mm , s.s.ball valve size 65 mm , s.s.bend h.duty 4 , s.s.bend h.duty 6 , s.s.bend h.duty 8 , s.s.fastener304 hex bolt,nut,washer,allen cap, allen csk ,stud etcless discount as per company previling pricelist , s.s.needle valve h.d.316 grade size 1/2 , s.s.pipe316 l grade , s.s.plate 304 , s.s.rod(shaft) 304 grad all size , s.s.socket 1/4 304 grade , seamles steam sch -40 long bend 4 , seamles steam sch -40 long bend 6 , seamlessshort bend sch-40 siz but 80mm , seamlessshort bend sch-40 size 65mm with ibr tested , seamlessshort bend sch-40 size 80mm with ibr tested , seamless bend 1/2 sch 40 s/w , seamless pipe grade 316 l for boiler , seamless sch-40 with ibr tested 2 short bend , seamless sch-40 with ibr tested 2long bend , seamless short bend -sch 40 size 2 , seamless short bend sch-40 size 1 1/2 , seamless tee 1/2 sw tested up to 3000 lbs , soldring past , soldring past , solonidvalve rotex make2way , solonidvalve rotex make2way , solonidvalve rotex make plate 2 part 2way of one part on way , spare kite for rotex make solonoid vavle 3012 , spare kite for rotex make solonoid vavle 3013 , spare rubber tyre t-5 , spare rubber tyre t-7 , spilit pin all size champion make less discount on company price list , spring stee 125x8 mm , spring stee 65x8 mm , spring steel 40 x 6 mm , spring steel size 100 x 8 mm , spring steel size 45 x 6 mm , spring steet 40 mm x 8 mm , spring washer all size champion make less discount on company price list , ss round 316 grade size 12 mm , ss round 316 grade size 20 mm , ss round 410 grade size 100 mmx3350 mm , ss seamless pipe 10 mm od x 7mm idgrade 316 , stag joint pested (type b red) , stainless steel hydraulic conector as per sample , steam packing wire reignfored metallic style600 champion make/spitman make size- 3 mm , steam packing wire reignfored metallic style600 champion make/spitman make size but 10 mm , steam packing wire reignfored metallic style600 champion make/spitman make size but 12mm , steam packing wire reignfored metallic style600 champion make/spitman make size but 16mm , steam packing wire reignfored metallic style600 champion make/spitman make size but 6mm , steam packing wire reignfored metallic style600 champion make/spitman make size but 8mm , steam wire breaded hose pipe indomakession make all size. less discount as per company previling pricelist , steam/hydrainde pipe line 16 mm , steel ball size 10 mm , steel ball size 12 mm , steel ball size 4 mm , steel ball size 6 mm , steel ball size 8mm , steel wire rope siling dia1/2x 5 mtr long hand make , steel wire rope siling dia 1 1/2x 3 mtr long hand make , steel wire rope with t.c usha martine make all size less discount on as per company previling pricelist , stud with nut size 10x35mm , super wash water pump 2555 ne 1440 prm , taflon rod1 1/4 x12 , taflon rod 3x12 , taflon rod size 1x12 , taflon rod size 3/4x12 , taflon rod size 45x300 mm , taflon rod size but 1 1/2x12 , taflon rod size but 3x12 , taflon tape 3/4 , tap handle 20 mm , taper shink drill 1/2x12 long , test tube , test tube , threadseallocker 50 ml tube , thread gauge mm/bsw , tin cutter size 10 , vaccum hose pipe 2 1/2 x18 , vaccum hose pipe 3 1/2 x18 , vaccum hose pipe but 3 x18 , water flow meter isi mark flange end size 3 , water flow meter isi mark flange end size 4 , water meter size 6 kranti make , wire netting 2 mesh x12 swg x 2.5 mm , wire rope celling1/2 x4 mtr , wire rope cellingbut1/2 x4 mtr , wire rope cellingbut 3/4 x6 mtr , wire rope celling 1 1/2x3 mtr long , wire rope celling 1/2x 3 mtr , wire rope celling 3/4 x6 mtr , wire rope celling but 1/2x 3 mtr , wire rope forged u clamp size 5/8 , wollen flet size 3/81 mtr x 2 mtr , wooden handles wire brushbut 6 x 3 , wooden handles wire brush 6x2

Co-operative

TRN :49068300 | 16 May, 2025

Tender Value : 0

Badaun - Uttar Pradesh

Tender for supply of hardware , item , white lead shalimar / shakoora make , red lead dewaldi make , baroza local , fevi coal , restoline1/2 kgpack , m.seal super mahindra & mahindra make , graphitepowder 1/2 kg pack , mosil compound gm-50 , mosil compound gn-100 , carborandum universal make emery paste 400gm pack rough & fine , aralditerate per kg , brasso 100 gm pack , gasket shallic compound , holtite liquid jointing compound1/2kg pack , iron cementrate per kg , teflon tape champion make1/2 , teflon tape champion make3/4 , teflon tape champion make1 , manila rope3/4 , manila rope1 , woolan felt(namda )rate per kg 1/4 , woolan felt(namda )rate per kg 1/2 , teflon rod champion make rate per length of 01 ft 25mm , teflon rod champion make rate per length of 01 ft 32mm , teflon rod champion make rate per length of 01 ft 35mm , teflon rod champion make rate per length of 01 ft 40mm , teflon rod champion make rate per length of 01 ft 50mm , teflon rod champion make rate per length of 01 ft 60mm , borex powder for gm casting , tempered postash egg make , cotton wastsuper white , silicon for c.i. casting , carborandum universal make emery taperough& fine 1/2 , carborandum universal make emery taperough& fine 3/4 , carborandum universal make emery taperough& fine 2 , hindustan sealol make meachincal seal for kirlosker pump with spring complte , old dhotionly cotton , galvnised fencing barbed wire rate per kg , locktite 50 ml pack no 270 , locktite 50 ml pack no 641 , brass zig zag strip , compressed leather sheet , painting brush 1” , painting brush 2” , painting brush 3” , painting brush 4” , painting brush 6” , spring steel flate all sizes rate per kg , carborandum stone 1x2x6 , three pigion make crucible 20 no , three pigion make crucible 40 no , three pigion make crucible 60 no , three pigion make crucible 80 no , three pigion make crucible 100 no , three pigion make crucible 120 no , brass welding rod 1/8” & 1/16” , welding flux 1/2kg pack , hindustan ferrodo make break liner 3/8x6” , hindustan ferrodo make break liner 3/8x8” , hindustan ferrodo make break liner 1/2x6” , usha martin make steel wire rope hemp cor 6/19 wire with test certificate 3/4 , usha martin make steel wire rope hemp cor 6/19 wire with test certificate 5/8 , usha martin make steel wire rope hemp cor 6/19 wire with test certificate 1/2 , usha martin make steel wire rope hemp cor 6/19 wire with test certificate 3/8 , h.d. plumber block smr rate as per ppl less…… , jmc spl quality bearing sleeve rate as per ppl less , all sizes brass strip rate per kg , lead wire all sizes rate per kg , carborandum universal make emery clothrate as per ppl , carborandum universal makeemery paper rate as per ppl , carborandum universal makegrinding wheele rate as per ppl , carborandum universal makesarface grinding wheele rate as per ppl , techno make soloniod valve for air 1/4 , techno make soloniod valve for oil 1 , techno make soloniod valve for water3/4 , rotaxmake single drive soloniod valve for air 1/4 , rotaxmake doubledrive soloniod valve for air 1/4 , 4 way valve1/2 , recorder chart chl 1 , recorder chart chl 2/3 , flow recorder pen , black rubber sheet rate per kg , mykoda make rubber oil seal rater as per ppl less , jyoti/orient /hockey make rubber joint rater per kg 1/4 , jyoti/orient /hockey make rubber joint rater per kg 1/8 , jyoti/orient /hockey make rubber joint rater per kg 1/16 , jyoti/orient /hockey make rubber joint rater per kg 1/32 , dunlop/good year make flate belt all sizes rate as per ppl less , m.s. perforated sheetthick 3mmx12mm hole dia 8mm , copper plate for c.f. machine rater per kg , brass round bar all sizes rater per kg , s.s. roundbar all sizes rate pr kg , glass wool rater per kg , glass wool pad complete rate per pad , oxygen gas regulater single/double stage esab make , black welding glass , white welding glass , rubber cord 3mm , rubber cord 4mm , rubber cord 6mm , rubber cord 7mm , foundry brush 2x6” , araldite with hardner hy/gy-250 , araldite with hardner hy/gy-825 , araldite with hardner hy/gy-830 , araldite with hardner hy/gy-850 , diamond chain all sizesrate as per ppl , lass , bag markingbrushs , hylum sheetrate per kg , leader make boiler gauge glass sleev 3/4 , qinn make boiler gauge glass sleev 3/4 , boiler gauge glass 3/4 x22 , side glass dia215mm x 15mm thick suitable temp. up to 150.c , side glass dia 197 mm x 15mm thick suitable temp. up to 150.c , matallic oil seal size 22 x 35 x 5 , matallic oil seal size 90 x 120 x 15 , matallic oil seal size 80 x 100 x 10 , matallic oil seal size 120 x 150 x 13 , matallic oil seal size100 x 120 x 13 , matallic oil seal size 150 x 180 x 15 , matallic oil seal size 120 x 160 x 13 , matallic oil seal size 150 x 27 x 85 , blow down volve spring , brass ferrule for lubricator , unique make spare rubber tyrepx 60 , unique make spare rubber tyrepx 70 , unique make spare rubber tyrepx 80 , unique make spare rubber tyrepx 90 , unique make spare rubber tyrepx 110 , unique make spare rubber tyrepx 160 , unique make rubber tyrecoupling complt. px 60 , unique make rubber tyrecoupling complt. px 70 , unique make rubber tyrecoupling complt. px 80 , unique make rubber tyrecoupling complt. px 90 , unique make rubber tyrecoupling complt. px 110 , unique make rubber tyrecoupling complt. px 160 , brass lined rubber bush50x50x15 , brass lined rubber bush 30x30x15 , brass lined rubber bush 25x30x15 , brass lined rubber bush 16x29x31 , brass lined rubber bush 38x38x22 , good year/dunlop make flat belt6” width x 6 ply , good year/dunlop make flat belt6” width x 8 ply , good year/dunlop make flat belt2” width x 4 ply , good year/dunlop make flat belt2” width x6 ply , good year/dunlop make flat belt3” width x 4 ply , good year/dunlop make flat belt3” width x6 ply , good year/dunlop make flat belt3” width x12 ply , sight glass cut from original belgium sheet suitable for very high temp.& pressure size 6” x 10mm , sight glass cut from original belgium sheet suitable for very high temp.& pressure size 6¼” x 12mm , sight glass cut from original belgium sheet suitable for very high temp.& pressure size 8” x 10mm , sight glass cut from original belgium sheet suitable for very high temp.& pressure size 8¼” x 10mm , sight glass cut from original belgium sheet suitable for very high temp.& pressure size 10” x 10mm , sight glass cut from original belgium sheet suitable for very high temp.& pressure size 10” x 15mm , sight glass cut from original belgium sheet suitable for very high temp.& pressure size 8 ¼” x 15mm , sight glass cut from original belgium sheet suitable for very high temp.& pressure size 8” x 15mm , circlip lock outer 18 mm , circliplock outer 22 mm , circliplock outer 30 mm , circlip lock waser 43 mm , circlip lock waser 50 mm , cs forgedgear coupling gc.109uniqe make , cs forgedgear coupling gc.113uniqe make , brass lined rubber bush50x50x15 , brass lined rubber bush 30x30x15 , brass lined rubber bush 25x30x15 , brass lined rubber bush 38x38x22 , brass shim size 14” x 48” x 4 thou , brass shim size 14” x 48” x 5 thou , brass shim size 14” x 48” x 8 thou , brass shim size 14” x 48” x 10 thou , brass shim size 14” x 48” x 12 thou , brass shim size 14” x 48” x 15 thou , hylem sheet size 2 feet x 2 feet x 3/4 , hylem sheet size 360mmx420mmx12mm , lock washer all size rate as per ppl , toughing side glass 200mm x 12 mm , rubber oring 294x5 , rubber oring 270x5 , rubber oring 33x4.5 , rubber cord 8 mm , try square 8 , diamond dressor 8 , compass out of inside 6 , compass out of inside 8 , nylock nut 1/2 , nylock nut 7/8 , nylock nut 1 , csk bolt with nut 3/4x 6 , csk bolt with nut 3/4x 4 , welding holder 600 amp. , hand gloves , welding copper cable 600 amp. , linseed oil , ms stud with nut h/t 7/8x 3 , ms stud with nut h/t 1 x 3.1/2 , ss pipe line 2grade- is 304 , ss pipe line 5thickness 2 mm grade- is 304 , ms tee 3/4 , ms long nut double face size 1.1/4 , tarfelt (20 mtr roll) , u clamp size 5/8 , spring steel funner size 8 width x1.5 mm thic. , metalic oil seal 225x287x50 , cutting nozzale 1/16 , cutting nozzale 3/64 , boiler gauge glass size-3/4x34 , boiler gauge glass sleeve size- 3/4 , carbide tips 50x22x12 r.h. (widya make) , carbide tips 40x20x10 r.h. (widya make) , carbide tips 32x18x10 r.h. (widya make) , carbide tips 32x18x10 l.h. (widya make) , carbide tips 25x14x10 r.h. (widya make) , carbide tips 25x14x10 l.h. (widya make) , carbide tool tip v - shape size -40 x 22 x 12mm , carbide tool tip r.h. size -25 x 14 x 8mm , carbide tool tip l.h. size -25 x 14 x 8mm , matellic oil seal size-110x140x20 , rubber cone for gauge glass , power master tube expender 42.6 id x 45 mm od , silicon brazing rod , flat belt size 3 x 8 ply , continuity tester , canvas flat belt 8 x 8 ply x 12 mm thickness , canvas flat belt thickness 12 mm, width- 250 mm , isi marked providing fixing of cotton hose pipe 15 mtr long rain 63 mm dia and s.s. male and female couplingsize 63 mm x 15 mtr long , isi marked providing fixing of cotton hose pipe 30 mtr long rain 63 mm dia and s.s. male and female couplingsize 63 mm x 30 mtr long

Government Departments

TRN :49022869 | 12 May, 2025

Tender Value : 1.60 Lacs

Pinjore - Haryana

Tender for tender for supply and installation of various items/goods at frh and ota in forest complex pinjore; 1 kent excell+ (r.o.) ? product code : 111003 ? product colour: white ? net weight : 10.70 kg ? dimensions(mm) :390(l)x200 (w)x520 (h) ? total power consumption : 60 w 1 2 voltas visi cooler 450 litres single door ? model no.: 5410719 / vc 450 ? gross volume: 450 l ? product dimension(wxdxh): 650 x 730 x 1900 ? temperature range: 0°c to 10°c ? soft aesthetic design ? wheels for easy mobility ? upto 40% energy efficient compressor ? self asthetic design ? energy efficient compressor ? anti-corrosive pre-coated body 1 3 havells monza ec 5s 10-litre storage water heater with flexi pipe ? capacity: 10 litres; ? wattage: 2000 watts; ? pressure: 8 bars ; ? bee rating: 4 star; ? waterproof degree : ipx-4 protection for longer product life 4 sujata gas stove ? 8mm ultra -thick toughened glass designed for long -lasting durability, added safety, and a premium look to enhance kitchen?s style. ? warranty: 9 years warranty on complete products including toughened glass. ? italian sabaf gas valve for longer life & easy conversion from lpg to png ? rigid, stable and sturdy pan supports with flame guard for gas saving ergonomically designed alloy knob5g designed forged brass burner with direct flame for indian style cooking ? titanium finish (black ss) drip tray ? 360° rotating brass gas nozzle for easy connection from any direction aesthetically ultra sleek design isi -certified product ? combination of 1 jumbo, 2 big, and 1 small burner for convenient cooking extra pair of jet to convert from lpg to png 1 . 5 sujata dynamix 900 watts mixer grinder ? colour : white 2 ? product dimensions 25dx60wx35h cms. ? blade material: stainless steel ? special feature compact ? capacity 1.5 cubic inches ? item weight 6000 grams 6 faber 90cm 1500m³/hr bldc motor autoclean slant chimney ? type: slant glass, wall mounted, bldc motor | black finish with 1500 m3/hr suction capacity ? control type: 9 speed touch & gesture | power: 240w ? led lights: 2 led rectangle lights ? finish: filterless matt black finish with black powder coated oil collector ? features: 80w bldc motor| noise reduction | toughened black glass and 1 metal blower ? 12 yrs on motor, 5 yrs comprehensive warranty by faber

Central Government/Public Sector

TRN :34426946 | 17 May, 2025

Tender Value : 0

Hooghly - West Bengal

Tender for gem bids for excavation in trenches in soft loose soil n exc 1.5 m wide and n. exc 1.5 m in depth for foundation etc , removing excavated materials n. exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point , material and labour for hardcore of broken stone or boulder of gauge exc 63mm but n. exc 75mm deposited spread , m and l for plain cement concrete type d2 1 4 8 using 40 mm graded stone aggregate as in foundation and mass filling , m and l for reinforced cement concrete nominal mix type b 1 1 2 4 20 mm graded stone aggregate foundations including rafts , formwork to sides of concrete foundations footings bases of columns rafts and raft beams sides and soffits if any , m and l for mild steel tmt bars 10 mm dia and over cut to length bent to shape required including cranking , m and l brick work with flyash bricks old size straight or curved on plan to any radius exc 6m mean radius build in cm 1 6 all as specified and as directed. , m and l for rendering 15 mm thick in cm 1 4 on fair faces of brick work finished even and smooth without using extra cement complete all as specified and as directed. , s and f pre painted semi fully corrugated galvalume aluminium zinc coating az 150 gi based steel sheet 0.50mm thick , m and l for framed work such as grills etc with endsof bars shouldered and or riveted or forged into spike framed guard bars , s and f pvc swr pipe fixed in walls as gutter 150 mm dia with necessary clamp complete all as specified and as directed. , plates plain or chequered channels square cut or notched ordinary and counter shank forming holes without any attachment complete all as specified and as directed. , s and f rolled mild steel in framed work fe 410w gde e 250 as in doors or gates truss purlin of angle

Related Searched Keywords : forged bar

List of forged-bar Tenders

Get forged bar Tender Alert...

Related Searched Keywords : forged bar

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us