Filters

List of lab-repair Tenders

List of latest lab-repair Tenders in Indian Tenders. Click on any lab-repair Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for lab-repair Tenders.

All-Tenders (80)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :49019178 | 01 Jan, 0001

Tender Value : 10.9 Thousand

Kosli - Haryana

Tender for tender for berli kalan , musepur , berli khurd , group of 5 no. of habitations annual mtc.works for water supply. miscellaneous items/ nut and bolt nut and bolt / at berli khurd motor spare parts & repairs/ housing bush providing and fixing of housing bush for 7.5 submersible motor /7.5 hp / at berli khurd motor spare parts & repairs/ thrust plate providing and fixing of thrust bearing plate 7.5 hp complete in all respect. /7.5 hp / at berli khurd motor spare parts & repairs/ rewinding of motor rewinding of submersible motor with including the cost of copper wire including credit of old material /7.5 hp / at berli khurd motor spare parts & repairs/ labour for submersible motor lowering unlowering hiring of jeep for motor lowering and unlowering / at berli khurd

State Government

TRN :49019207 | 13 May, 2025

Tender Value : 3.50 Lacs

Khalilabad - Uttar Pradesh

Tender for tender for pathrahat poorvi link road(length 0.30 km.) general repair. - wbm g-3providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled 80-100 kn in stages to proper grade and camber, applying and brooming crushable screening to fill up the interstices of coarse aggregate, watering and compacting to the required density grading-3 as per t.s.c. 405 including labour cess. (gst shall be paid extra) 2 tack coat-providing and applying tack coat with bitumen (vg-10)using bitumen pressure distributor at the rate of 0.30kg per sqm on the prepared bituminous surfacecleaned with hydraulic broom as per technical speicification clause 503. including labour cess.(gst shall be paid extra) 3 premix carpet-providing, laying and rolling of open-graded premix carpet of 20mm thickness composed of 13.2 & 11.2 mm aggregates either using penetration grade bitumen or emulsion to required line grade and level to serve as wearing coarse on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100kn static roller capacity finished to required lavel and grades to be followed by seal coat as per techincal specification clause 508 including cost of bitumen & labour cess. (gst shall be paid extra) 4 seal coat-providing and applying seal coat type c comprising of a layer of bituminous binder followed by a cover of stone chipping of specified grading and rolling with power roller 8-10 tonne kn static roller and finishing to required level and grades as per technical specification clause 510 including cost of bitumen & labour cess.(gst shall be paid extra).

State Government

TRN :49019530 | 13 May, 2025

Tender Value : 12.50 Lacs

Khalilabad - Uttar Pradesh

Tender for tender for gaurdeeh pitch marg se majhaura tak road(length 1.20 km.) general repair - wbm g-3providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled 80-100 kn in stages to proper grade and camber, applying and brooming crushable screening to fill up the interstices of coarse aggregate, watering and compacting to the required density grading-3 as per t.s.c. 405 including labour cess. (gst shall be paid extra) 2 tack coat-providing and applying tack coat with bitumen (vg-10)using bitumen pressure distributor at the rate of 0.30kg per sqm on the prepared bituminous surfacecleaned with hydraulic broom as per technical speicification clause 503. including labour cess.(gst shall be paid extra) 3 premix carpet-providing, laying and rolling of open-graded premix carpet of 20mm thickness composed of 13.2 & 11.2 mm aggregates either using penetration grade bitumen or emulsion to required line grade and level to serve as wearing coarse on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100kn static roller capacity finished to required lavel and grades to be followed by seal coat as per techincal specification clause 508 including cost of bitumen & labour cess. (gst shall be paid extra) 4 seal coat-providing and applying seal coat type c comprising of a layer of bituminous binder followed by a cover of stone chipping of specified grading and rolling with power roller 8-10 tonne kn static roller and finishing to required level and grades as per technical specification clause 510 including cost of bitumen & labour cess.(gst shall be paid extra).

State Government

TRN :49019544 | 13 May, 2025

Tender Value : 4.00 Lacs

Khalilabad - Uttar Pradesh

Tender for tender for shanichara babu to nadipurwa road(length 0.400 km.) general repair. - wbm g-3providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled 80-100 kn in stages to proper grade and camber, applying and brooming crushable screening to fill up the interstices of coarse aggregate, watering and compacting to the required density grading-3 as per t.s.c. 405 including labour cess. (gst shall be paid extra) 2 tack coat-providing and applying tack coat with bitumen (vg-10)using bitumen pressure distributor at the rate of 0.30kg per sqm on the prepared bituminous surfacecleaned with hydraulic broom as per technical speicification clause 503. including labour cess.(gst shall be paid extra) 3 premix carpet-providing, laying and rolling of open-graded premix carpet of 20mm thickness composed of 13.2 & 11.2 mm aggregates either using penetration grade bitumen or emulsion to required line grade and level to serve as wearing coarse on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100kn static roller capacity finished to required lavel and grades to be followed by seal coat as per techincal specification clause 508 including cost of bitumen & labour cess. (gst shall be paid extra) 4 seal coat-providing and applying seal coat type c comprising of a layer of bituminous binder followed by a cover of stone chipping of specified grading and rolling with power roller 8-10 tonne kn static roller and finishing to required level and grades as per technical specification clause 510 including cost of bitumen & labour cess.(gst shall be paid extra).

State Government

TRN :49019558 | 13 May, 2025

Tender Value : 10.00 Lacs

Khalilabad - Uttar Pradesh

Tender for tender for rainiya link road(length 1.00 km.) general repair. - wbm g-3providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled 80-100 kn in stages to proper grade and camber, applying and brooming crushable screening to fill up the interstices of coarse aggregate, watering and compacting to the required density grading-3 as per t.s.c. 405 including labour cess. (gst shall be paid extra) 2 tack coat-providing and applying tack coat with bitumen (vg-10)using bitumen pressure distributor at the rate of 0.30kg per sqm on the prepared bituminous surfacecleaned with hydraulic broom as per technical speicification clause 503. including labour cess.(gst shall be paid extra) 3 premix carpet-providing, laying and rolling of open-graded premix carpet of 20mm thickness composed of 13.2 & 11.2 mm aggregates either using penetration grade bitumen or emulsion to required line grade and level to serve as wearing coarse on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100kn static roller capacity finished to required lavel and grades to be followed by seal coat as per techincal specification clause 508 including cost of bitumen & labour cess. (gst shall be paid extra) 4 seal coat-providing and applying seal coat type c comprising of a layer of bituminous binder followed by a cover of stone chipping of specified grading and rolling with power roller 8-10 tonne kn static roller and finishing to required level and grades as per technical specification clause 510 including cost of bitumen & labour cess.(gst shall be paid extra).

State Government

TRN :49019630 | 13 May, 2025

Tender Value : 18.00 Lacs

Kaushambi - Uttar Pradesh

Tender for tender for painting and repair work in treasury manjhanpur - demolishing brick work manually/ by mechanical means including stacking of serviceablematerial and disposal of unserviceable material within 50 metres lead as per direction ofengineer-in-charge. 2 dismantling aluminium/ gypsum partitions, doors, windows, fixed glazing and falseceiling including disposal of un service able surplus material and stacking ofservice able material with in 50 meters lead as directed by engineer- in -charge. 3 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in : 4 providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : 9.7.1 second class teak wood 5 12mm cement plaster of mix 1:6 ( 1cement: 6 coarse sand ) 6 providing and laying vitrified floor tiles in different sizes of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement etc.complete. 7 removing white or colour wash by scrapping and sand papering and preparing thesurface smooth including necessary repairs to scratches etc. complete 8 providing and applying white cement based putty of average thickness 1 mm,of approved brand and manufacturer, over the plastered wall surface to preparethe surface even and smooth complete. 9 wall painting with premium acrylic emulsion paint of interior grade 10 providing and fixing brass bib cock of approved quility of 20mm dia complete 11 providing and fixing consealedstop cock of approved quility of 20mm dia complete 12 providing and fixing white vitreous china pedastal typewater closet with isi marked solid plastic seat and lid complete 13 providing and fixing automatic sensor based urinal systemhindware senso art sensor as per avilablity in market as per direction of e/i 14 providing and fixing hidware floracommode complete set per avilablity in market as per direction of e/i 15 providing and fixing counter top wash hand basinper avilablity in market ( jaquar or equivalent ) as per direction of e/i 16 providing and fixing shower of approved quility of 15 mm dia complete 17 providing and fixing mirror of supirior glass of approved quility and required shape complete 18 providing and fixing low lavel flushing cistern with mannualy controlled device 10 l capasity. 19 supplying and fixing following modular switch / socket on existing modular plate and switch box including connections but excluding modular plate etc as required. 5 / 6 amp. 20 providing and fixing mcb as per avilablity in market as per direction of e/i 21 providing and fixing led tube light as per avilablity in market as per direction of e/i 22 providing and fixing exhaust fan as per avilablity in marketas per direction of e/i 23 providing and fixing g.i. pipes complete with g.i. fittings and clamps, i/c cuttingand making good the walls etc.internal work - exposed on wall18.10.2 20 mm dia nominal bore 24 providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. 25 providing and fixing gate valve of approved quility 26 providing plumbing work by technician/ plumber 27 providing window repairing work by technician/ fiter grade 1 28 electrification work in wall panneling as per direction of e/i 29 providing wooden work repairing by carpenter 2nd class 30 providing cleaning work by beldar 31 providing colornest roller blinds polyster curtains for windows and fixing of intirior work on existing window as per direction of e/i 32 providing and fixing in wall panelling in single layer exterior grade hdhmr boards of action tesa & equivalent recommended gradingstreated for fungal/borer/termite resistance and calibrated for high moisture resistance as per grade-1, is-12406-2003 and also ecomarked labelled by isi for enviournment friendly with density 850 kg/cum (5% variation)] to existing frame/base/wall ) and top layer with action tesa ac3 8mm hdf laminated plank(880kg/m3) using fully threaded csk phillips headed s.s. screws of required sizes and headless nails, glue etc. (to secure top decorative layer on the base layer)wherever recommended all complete as per direction of the engineer-in-charge. 33 steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required 34 providing & fixing glow sign bord for double lock hall as per direction of e/i 35 granite stone slab of colour black or other 8.2.2.1 area of slab upto 0.50 sqm 36 providing & fixing soap dispensor as per direction of e/i 37 repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of engineer-in-charge. 14.1.1 with cement mortar 1:4 (1 cement : 4 fine sand

corporations/Associations/Others

TRN :49019832 | 20 May, 2025

Tender Value : 21.21 Lacs

Baraut - Uttar Pradesh

Tender for tender for ms channel, culvert and road repair work in ward no. 21 to 25 in baraut town. - dismentling of old brick on edge kharnja including stacking of old brick as per site incharge s.i-new item-03 2 brick on edge pavement on patries with brick laid dry joint filled with local sand in comp.position (s.i-763) 3 brick solling of s.o.b brick laid (labour rate only) in comp.position(s.i785) 4 contruction of granular sub- base by providing well graded material spreading in uniform layers with motor grader on prepared surface ,mixing by mix in place method with rotavtor at omc,and compactingwith smooth wheel roller to achieve the desired drnsity ,as per mord,specification 401 5 m-150 brick work in (1:3) mortar with cement and c/sand in drain in comp.position (s.i-307) 6 12 mm thick plaster in( mortar with (1:3)cement and c/sand on brick work in comp position (s.i-582a) 7 ccwork in (1:2:4) mortar with 2cm gauge stone grit cement c/sand inincluding all material labour tools etc in comp.position (s.i-281) 8 rcc work in ((1:1.5;3) in drain side ramp with 2.0cm gauge cement c/sand in culvert slab and road side beam in comp.position (s.i-284)a 9 mild steel in rcc work in comp.position s.i. no 504 10 supply and laying of 80mm thick cc rubber mouid tile i-shape mechanically compressed interloking paver block manufactured by high pressure and control vibration machine having plan dimension 200*(160+120mm)with minium 5mm topping of o.p cement mixed with 25% marble powder .the compressive strength of concrete paver block shall not be less than 30mpa and 4.5 kg per no.including cost of all material labour t&p etc also including leveling and dressing of surface up to required level and slop filling joints with local sand 11 m.siron work of small size and section in channel in comp.position (d.s.r ) 12 s/fixing of r c c hume pipe np-3( s&s type)dia 350mm in complete./possition s.i. new item 13 laying of 80mm thick interlocking tiles . in labour rate. new item 14 supplyof the following size ofpipe including railway freight insurance charge and cartage up to site etccomplete(make trupati,/parakesh/monik gold or equvelent isi marked ) 15 pvc pipe (o.d) 16 200 mm10kg/cm1 17 160mm10kg/cm1 18 140mm6.0kg/cm1 19 110mm6.0kg/cm1

Government Departments

TRN :49019871 | 21 May, 2025

Tender Value : 8.47 Lacs

Agra - Uttar Pradesh

Tender for tender for repair work of zone-1 ward no. 16 ratanpura nagla vida community hall. - cleaning of the site for warkable etc. all complete. (non scheduled) 2 1:5:10 (1 cement : 5 coarse sand (zone-iii) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) (dsr 2023 sh-4.1.10 ) 3 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in :cement mortar 1:4 (1 cement : 4 coarse sand) (dsr 2023 sh-6.4.1 ) 4 brick work 7 cm thick with common burnt clay f.p.s. (non modular) brick of class designation 7.5 in cement mortar 1:3 (1 cement : 3 coarse sand) in superstructure above plinth level and upto floor five level. (dsr 2023 sh-6.8 ) 5 reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,taircases and spiral stair cases above plinth level up to floor fiveevel, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).(dsr 2023 sh-5.3 ) 6 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. thermo-mechanically treated bars of grade fe-500d or more(dsr 2023 sh-5.22.6) 7 centering and shuttering including strutting, propping etc. and removal of form work for :columns, piers, abutments, pillars, posts and struts(dsr 2023 sh-4.3.3 ) 8 12 mm cement plaster of mix : 1:4(1 cement: 4 fine sand)(dsr 2023 sh-13.1.1 ) 9 structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.(dsr 2023 sh-10.1 ) 10 providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.fire retardant plywood conforming to is: 5509(dsr 2023 sh-9.126.2 ) 11 providing and fixing isi marked is:1341 m.s. pressed butt hinges bright finished with necessary screws etc. complete :)75x47x1.70 mm (dsr 2023 sh-9.55.3 ) 12 providing & fixing decorative high pressure laminated sheet of plain / wood grain in gloss/ matt/ suede finish with high density protective surface layer and reverse side ofdhesive bonding quality conforming to is : 2046 type s including cost of adhesive of approved quality. 1.0 mm thick (dsr 2023 sh-9.127.2 ) 13 distempering with 1st quality acrylic distemper (ready mixed) having voc content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour new work (two or more coats) over and including water thinnable priming coat with cement primer having voc content less than 50 gram/litre (dsr 2023 sh-13.41.1 ) 14 painting steel work with deluxe multi surface paint to give an even shade. two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture(dsr 2023 sh-1021sub head : 13 finishing13.48.3 ) 15 providing & fixing white vitreous china water closet squatting pan (indian type) along with “s” or “p” trap including dismantling of old wc seat and “s” or “p” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of engineer-in charge. long pattern w.c pan of size 580x440 mm (dsr 2023 sh-14.80.1) 16 providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require white vitreous china flat back wash basin size 450x 300 mm with single 15mm c.p. brass(dsr 2023 sh-17.7.7) 17 providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white pvc automatic flushing cistern, with fittings, standard size c.p. brass flush pipe, spreaders with unions and clamps (all in c.p. brass) with waste fitting as per is: 2556, c.i. trap with outlet grating and other couplings in c.p. brass, including painting of fittings and cutting and making good the walls and floors wherever required(dsr 2023 sh-17.5.1 ) 18 providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white p.v.c. automatic flushing cistern, with fittings, standard size g.i./ pvc flush pipe for back and front flush with standard spreader pipes with fittings, g.i clamps and c.p. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required: single squatting plate with 5 litre p.v.c. automatic flushing cistern(dsr 2023 sh-17.6.1 ) 19 providing and laying flamed finish granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer-in-charge :flamed finish granite stone slab jet black, cherry red, elite brown, cat eye or equivalent.(dsr 2023 sh-11.55.1 ) 20 providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to isi : 12701, colour of opaque white or as approved by engineer-in- charge. the rate includes making necessary holes for inlet, outlet & over flow pipes. the base support i/c fittings & fixtures for tank shall be paid separately 21 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized pvc medium well casing (cm) pipe of required dia, conforming to is: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of engineer -in-charge100 mm nominal size dia 22 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized pvc medium well casing (cm) pipe of required dia, conforming to is: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of engineer -in-charge150 mm nominal size dia 23 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply and all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one stepcpvc solvent cement and testing of joints complete as per direction of engineer in charge. internal work - exposed on wall 15 mm nominal dia pipes 24 providing and fixing ptmt bib cock of approved quality and colour.15mm nominal bore, 86 mm long, weighing not less than 88 gms 25 providing and fixing ptmt stop cock of approved quality and colour.15 mm nominal bore, 86 mm long, weighing not less than 88 gms) 26 mirror of superior make glass 60x45 cm 27 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete size of tile 600x600 mm 28 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 29 supply and fixing of light fitting switch board. (none sheduled) 30 supply and fixing wiring of light point. (none sheduled) 31 s/l/j of 20mm dia pvc cunduct pipe etc. all complete. 32 supply & fixing of wiring sub main. 33 supply & fixing of plug point 15mm. 34 lettering & painting of wall etc. all complete. 35 supply & fixing of 27watt. cfl etc. all complete. 36 carriage of materials by manual labour including loading, unloading and stacking for lead less than 01-50 mtrm.207.34+30.42 every 50 additonal meter 37 stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade. 7.38.1 8mm thick (mirror polished and machine cut edge) 7.38.1.1 granite stone of any colour and shade 38 constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast r.c.c. horizontal grating with frame complete as per standard design :with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 39 kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :25 mm thick 40 6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand) 41 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.) 42 stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (to be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :8.14.1 red sand stone - exposed face fine dressed with rough backingt 43 marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :raj nagar plain 44 providing and fixing stainless steel ( grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)(dsr 2023 sh-10.28 ) 45 1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources). (dsr 2023 s h) 46 supply & fixing granite stone work display board (size 2.50ft x 4.00ft) including painting, lettering etc. all complete. (none schedule) 47 sub total 48 add/deduction rs. for estimate figure amount match 49 grand total

Government Departments

TRN :49020034 | 15 May, 2025

Tender Value : 0

Thiruvananthapuram - Kerala

Tender for annual rate contract (arc) for miscellaneous furniture repair items at main office and zonal offices of coporation of thiruvanathapuram 2025-2026= 1 1. steel table1.01 replacement of lock (isi mark) with 2 keys 2 1.02 adjustment of drawer and slider 3 1.03repairing of locking system 4 1.04providing of key (1 no) 5 1.05 repairing of door and hinges 6 2. steel chair / steel revolving chair2.01 replacement of wooden arm 7 2.02 replacement of rubber shoes / cap 8 2.03rattening of steel / wooden / revolving chairs seat and back with good quality wires including cost of material and labour 9 2.04overhauling, greasubg & repairing of revolving chair i/c welding if any 10 2.05replacement of wheel good quality nylon wheel with necessary fittings for revolving chair 11 3.steel almarah (furniture) spray painting of steel furniture 3.01 repairing locking system and providing new key (1 no.) if required for existing lock 12 3.02 replacement of lock with 2 keys 13 3.03replacement of handle 14 3.04 repairing of locking system i/c replacement of bush 15 4. steel almarah 4.01steel almirah (full size) 16 4.02 steel almirah (small size) 17 4.03steel rack 8 ft, height 18 4.04 steel rack 6 ft, height 19 4.05steel rack 4 ft, height 20 4.06 steel table (any size, as exist) 21 4.07steel chair (any size, as exist) 22 5.melamine polishing of furniture 5.01wooden almirah (full size) 23 5.02 wooden almirah (small size) 24 5.03wooden rack 8 ft, height 25 5.04wooden rack 6 ft, height 26 5.05wooden rack 4 ft, height 27 5.06wooden table (any size, as exist) 28 5.07wooden chair (any size, as exist) 29 5.08wooden chair arms (any size, as exist for one chair) 30 6. aluminium glass doors & windows6.01adjustment of floor spring of al. door for smoother movement 31 6.02repair of existing door lock 32 6.03providing new lock with keys for existing door 33 6.04 adjustment of floor spring / door closer of alu. door for smoother movement 34 6.05 replacing of floor spring for existing door 35 6.06 replacing of door closer for existing door 36 6.07 replacing of alu. door / windows hinges 37 6.08 replacing of alu. door weather strip 38 7. miscellaneous works7.01 replacing of new door mortice lock with handlc set of approved isi make 39 7.02 replacing of aluminium door stopper of approved isi make 40 7.03providing new door / table / almarah key for existing lock 41 7.04 repairing of door lock 42 7.05providing and fixing new of wooden table drawer roller type channel 43 7.06providing and fixing new of wooden table drawer telescopic type channel 44 7.07 providing and fixing new of wooden table handle / knob 45 7.08one inch height lettering / numbering of furniture indentification with enamel paint (per furniture item) 46 7.09 providing / fixing of pvc signage plate with engraving letter as per requirement colour and design (per sq. inch) 47 7.10reflexing and repair of existing venetian blinds / vertical blinds by providing necessary clips etc. (per piece) 48 7.11providing new ms handles to window frames as per existing pattern for proper closing 49 7.12 replacing of alu. door weather strip 50 7.13 computer table lock replacement 51 7.14computer table maintenance

State Government

TRN :49020179 | 01 Jan, 0001

Tender Value : 0

Bhopal - Madhya Pradesh

Tender for tender for 1) purchase of herbal raw material 2) cctv system (puchase and installation) 3) pharmaceutical packaging material 4) machine repair 5) courier services 6) appointment of agency for label designing

Related Searched Keywords : lab repair

List of lab-repair Tenders

Tender for tender for 1) purchase of herbal raw material 2) cctv system (puchase and installation) 3) pharmaceutical packaging material 4) machine repair 5) courier services 6) appointment of agency for label designing

Get lab repair Tender Alert...

Related Searched Keywords : lab repair

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us