Filters

List of lock-washer Tenders

List of latest lock-washer Tenders in Indian Tenders. Click on any lock-washer Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for lock-washer Tenders.

All-Tenders (136)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :34415194 | 13 May, 2025

Tender Value : 0

Bangalore - Karnataka

Tender for gem bids for ms flat 10cm x 10mm , ms rivet , gi wire 8 swg , haps and staples 3 inch , side handle 4 inch , brass metal solid , ss hinges 1 inch , ss hinges 2 inch , ss hinges 3 inch , ms flat 6cm x 5mm , ridge sheet 8 feet x 2 feet , self threaded screw 1 inch , self threaded screw 2 inch , self threaded screw 2.5 inch , self threaded screw 3 inch , m10 washer , silicon gun , silicon sealant , cutting wheel 4 inch , cutting wheel 5 inch , exagonal bit socket , bosch carbon brush , steel almirah door lock , steel almirah door handle

corporations/Associations/Others

TRN :34415546 | 13 May, 2025

Tender Value : 0

Neyveli - Tamil Nadu

Tender for gem bids for sc050660116 nordlock washer diff wear ring for 3 point 3kv 700kw hayward tyler make bcp part no 42577 or 206 , sc050660114 screw impeller nut for 3 point 3kv 700kw hayward tyler make bcp part no 16884m16 or 45 , sc050660107 nordlock washer or tab washer lock ring for 3 point 3kv 700kw hayward tyler make bcp part no 42577or 206 , sc050660112 locking wire roll for 3 point 3kv 700kw hayward tyler make bcp part no 169xynfb or 100 , sc050660108 cap head screw sec ring or brg hsg for 3 point 3kv 700kw hayward tyler make bcp , sc050660115 nordlock washer bearing housings for 3 point 3kv 700kw hayward tyler make bcp part no 42577 or 210 , sc050660123 screw lock ring or c e brg hsg for 3 point 3kv 700kw hayward tyler make bcp part no 16884m12 or 75 , sc050660118 o ring cover end for 3 point 3kv 700kw hayward tyler make bcp part no 43023 or 1711 , sc050660124 screw main thrust seat for 3 point 3kv 700kw hayward tyler make bcp part no 16884m10 or 30 , sc050660130 spring washer main thrust seat for 3 point 3kv 700kw hayward tyler make bcp part no 17207m10 , sc050660129 split pin thrust pad for 3 point 3kv 700kw hayward tyler make bcp part no 167wbdgj62m0 , sc050660125 screw reverse thrust for 3 point 3kv 700kw hayward tyler make bcp part no 16884m10 or 65 , sc050660117 nordlock washer rev thrust for 3 point 3kv 700kw hayward tyler make bcp part no 42577 or 210 , sc050660128 split pin rev thrust pad for 3 point 3kv 700kw hayward tyler make bcp part no 167wbdgj62m0 , sc050660122 screw filter or rev thrust seat for 3 point 3kv 700kw hayward tyler make bcp part no 16201m10 or 35 , sc050660126 screw reverse thrust wear ring for 3 point 3kv 700kw hayward tyler make bcp part no 16884m6 or 30 , sc050660121 philidas nut reverse thrust for 3 point 3kv 700kw hayward tyler make bcp part no 16526m6 , sc050660127 screw stator lock ring for 3 point 3kv 700kw hayward tyler make bcp part no 41258 or 506 , sc050660110 gasket pump or motor for 3 point 3kv 700kw hayward tyler make bcp part no 42499 or 504 , sc050660109 gasket motor cover for 3 point 3kv 700kw hayward tyler make bcp part no 42499 or 504 , sc050660132 tgm termination kit for 3 point 3kv 700kw hayward tyler make bcp part no 43108 or 1 , sc050660120 o seal terminal gland stem for 3 point 3kv 700kw hayward tyler make bcp part no 36823 or 130 , sc050660119 o seal terminal gland body for 3 point 3kv 700kw hayward tyler make bcp part no 37977 or 229 , sc050660113 back up ring terminal gland for 3 point 3kv 700kw hayward tyler make bcp part no 40262 or 111 , sc050660131 tape silicon for 3 point 3kv 700kw hayward tyler make bcp part no 189wcbjb81m0 , sc050660111 heatshrink tubing for 3 point 3kv point 700kw hayward tyler make bcp part no 189wpggc81m0

Central Government/Public Sector

TRN :34404838 | 10 May, 2025

Tender Value : 0

North 24 Paragana - West Bengal

Tender for gem bids for snap ring body,adapter plug tube tube,outlet valve , oil pump oil pump assy spring oil pump shim , oil pump snap ring retainer oil pump strainer muffler ring bolt bolt bolt flange washer band bolt clamp spacer bracket bracket brackt spacer elbow nozzle o ring spill hose ( 5 pieces) banjo bolt clip bolt nut retaining spill tube spill tube nozzle holder assy packing banjo bolt gasket gasket nipple tube bolt bolt element bracket bracket plate case valve assy plug plug pin piston piston ( a type) piston ring assy bearing crankpin std(sp) 1 pr bearing crankpin us 0.25, pair bearing crankpin us 0.50 pair bushing, connecting rod bolt, connecting rod dowel pin snap ring bearing ball bearing case bearing ball nut snap ring bearing ball case bearing dowel ring shaft p.t.o shaft spline shim assy snap ring snap ring snap ring bearing ball joint bolt tube clip flange delivery valve assy gasket gasket gasket o ring o ring o ring oil seal pump element seal ring over flow valve shim spacer ring tapered roller bearing tapered roller bearng threaded pin delivery valve holder retainer bearing pin compressor spring hexagon nut hexagon nut plain washer roller tappet assy spring lock washer straight pin threaded pin threaded ring wood ruff key control rod control sleeve filler piece flat head screw intermediate bearing torx fillister screw camshaft compression spring flat seal ring flat seal ring hexagon nut micro encapsulated screw pointer roller screw plug screw plug spring seat lower spring seat upper bearing end plate closing cover flange bush guide bushing pump housing screw plug screw plug + shim plate 1.15 mm shim plate 0.40 mm shim plate 0.45 mm shim plate 0.50 mm shim plate 0.55 mm shim plate 0.60 mm shim plate 0.65 mm shim plate 0.70 mm shim plate 0.75 mm shim plate 0.80 mm shim plate 0.85 mm shim plate 0.90 mm shim plate 0.95 mm shim plate 1.00 mm shim plate 1.05 mm shim plate 1.10 mm shim plate 1.20 mm shim plate 1.30 mm shim plate 1.35 mm shim plate 1.40 mm shim plate 1.45 mm shim plate 1.50 mm shim plate1.25 mm support ring gasket shaft, rocker arm assy gasket arm rocker assy. (intake) arm. rocker assy. (exhaust) spring nut cover , cylinder head cover , cylinder head bolt bolt housing rocker screw bolt, 45 long bushing , ce frame bushing , lever hsg bushing, drive hsg insulator insulator insulator lead, ce terminal switch bearing bush bearing bush c e connector insul(bush) bottom insul(bush) top nut positive connector armature brush field coil housing, drive screw-pole shoe bush plate asm drive assy plunger spring , brush solenoidswitch (37s)

Central Government/Public Sector

TRN :34404846 | 10 May, 2025

Tender Value : 0

North 24 Paragana - West Bengal

Tender for gem bids for spring washer armature assembly brush carrier assy brush gear carrier brush gear ring assy field coil assy pole screw thrust washer c.e brush assembly brush holder c e bracket assy d.e bracket drive assembly mounting flance assy sealing ring spring brush fixing screw gasket 4st relay screw wench filter "liquid gasket applicator ( 07427-50993)" hose clamp clip elbow bolt screw tube tube spacer stay thermostat nipple tube gasket o-ring bolt bolt spring cover,water outlet housing ,thermostat manifold,water manifold,water hose clamp hose water pump assy bolt connector screw washer spring hose water separator bracket spacer bushing rubber lock bolt bolt shim seat bushing shim 1.0 mm shim pin dowel spacer shim seal bearing knob o ring fitting grease fitting grease governor assy pin cotter bolt bearing disc pin screw nut nut washer spring screw key lever yoke rod rod joint shaft lever lever lever rod rod strainer strainer valve drain hose hose gasket o ring o ring gasket tube o ring clip elbow nipple nipple cap assy (vandalism) washer bolt joint bolt guage level sleeve nut strainer assy flange joint eye flange tank assy o ring seal oil nipple gasket gasket o ring o ring o ring nipple gasket o ring for mount all three pump (aps) bolt joint bolt joint tube assy tube assy tube assy bearing bearing power take off assy strainer cap ring snap screw o ring hose hose tube hose tube tube vinyl gasket clamp clamp clamp clamp clamp valve screw screw shroud valve pressure grill grill grill grill grill band o ring breather gasket gasket gasket gasket gasket gasket screen band assy nut bolt bolt nut bolt stud screw bolt stud stud plug cap nut pin boss stud plate plate gauge oil relief valve assy plug

Central Government/Public Sector

TRN :34404893 | 12 May, 2025

Tender Value : 0

Jamshedpur - Jharkhand

Tender for gem bids for clearing jungle including uprooting of rank vegetation grass brush wood trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. "supplying chemical emulsion in sealed containers including delivery as specified. chlorpyriphos or lindane emulsifiable concentrate of 20 percent" "diluting and injecting chemical emulsion for post constructional anti termite treatment excluding the cost of chemical emulsion along external wall where the apron is not provided using chemical emulsion at the rate 7.5 litres or sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall and rodding etc. complete isto with chlorpyriphos or lindane e.c. 20 percent with 1 percent concentration" "earth work in excavation by mechanical means hydraulic excavator or manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m all kinds of soil." filling available excavated earth excluding rock in trenches plinth sides of foundations etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering lead up to 50 m and lift upto 1.5 m supplying and filling in plinth with sand under floors including watering ramming consolidating and dressing complete. "providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level 1 isto 3 isto 6 1 cement 3 coarse sand zone iii 6 graded stone aggregate 20 mm nominal size " "providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering shuttering finishing and reinforcement all work up to plinth level isto 1 isto 1.5 isto 3 1 cement 1.5 coarse sand zone iii 3 graded stone aggregate 20 mm nominal size " "reinforced cement concrete work in walls any thickness including attached pilasters buttresses plinth roof and string courses fillets columns pillars piers abutments posts and struts etc. above plinth level up to floor five level excluding cost of centering shuttering finishing and reinforcement 1 isto 1.5 isto 3 1 cement 1.5 coarse sand zone iii 3 graded stone aggregate 20 mm nominal size " brick work with common burnt clay f.p.s. non modular bricks of class designation 7.5 in foundation and plinth in cement mortar 1 isto 6 1 cement 6 coarse sand brick work with common burnt clay f.p.s. non modular bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in cement mortar 1 isto 6 1 cement 6 coarse sand "half brick masonry with common burnt clay f .p .s. non modular bricks of class designation 7.5 in superstructure above plinth level up to floor v level. cement mortar 1 isto 4 1 cement 4 coarse sand " "centering and shuttering including strutting propping etc. and removal of form for foundations footings bases of columns etc. for mass concrete" "centering and shuttering including strutting propping etc. and removal of form for suspended floors roofs landings lintals beams balconies and access platform" "steel reinforcement for r.c.c. work including straightening cutting bending placing in position and binding all complete upto plinth level thermo mechanically treated bars of grade fe 500d or more make sail or tata or jindal " "15 mm cement plaster on the rough side of single or half brick wall of mix isto 1 isto 6 1 cement isto 6 fine sand rates for external plastic are for height upto 10m from ground level in less otherwise stated cement make nuvoco lafarge or ultratech or acc or as per direction of eic " "12 mm cement plaster of mix 1 isto 6 1 cement isto 6 fine sand rates for external plastic are for height upto 10m from ground level in less otherwise stated cement make nuvoco lafarge or ultratech or acc or as per direction of eic " "6 mm cement plaster of mix 1 isto 3 1 cement 3 fine sand rates for external plastic are for height upto 10m from ground level in less otherwise stated cement make nuvoco lafarge or ultratech or acc or as per direction of eic " neat cement punning. "finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade new work two or more coats applied at the rate 1.43 ltr or 10 sqm over and including priming coat of exterior primer applied at the rate 2.20 kg or 10 sqm make dulux or burger or asian paints or as per direction of eic" white washing with lime to give an even shade new work three or more coats mix with fevicol ddl and robin blue or as per direction of eic "painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. preferable make dulux or burger or asian paints or as per direction of eic make dulux or burger or asian paints or as per direction of eic" making plinth protection 50mm thick of cement concrete 1 isto 3 isto 6 1 cement 3 coarse sand zone iii 6 graded stone aggregate 20 mm nominal size over 75mm thick bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation levelling and dressing and finishing the top smooth "providing and fixing angle iron frames for doors windows and ventilators of mild steel angle sections of size 35x35x5 mm joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing t iron frame or to the wall with dash fastener including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer all complete as per the direction of engineer in charge. make sail or tata or jindal " "providing and fixing isi marked flush door shutters conforming to is isto 2202 part i decorative type core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including isi marked stainless steel butt hinges with necessary screws" "structural steel work in single section fixed with or without connecting plate including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete. make sail or tata or jindal " 25 mm thick pvc flush door shutters made out of a one piece multi chamber extruded pvc section of the size of 762 mm into 25 mm or less as per requirement with an average wall thickness of 1 mm plus or minus 0.3 mm . pvc foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. m.s. tube having dimensions 19 mm into 19 mm and 1.0 mm plus or minus 0.1 mm is inserted along the hinge side of the door. core of the door shutter should be filled with high density polyurethane foam. the top and bottom edges of the shutter are covered with an end cap of the size 25 mm into 11 mm. door shutter shall be reinforced with special polymeric reinforcements as per manufacturer specification and direction of engineer in charge to take up necessary hardware and fixtures. stickers indicating the locations of hardware will be pasted at appropriate places "providing and fixing isi marked oxidised m.s. sliding door bolts with nuts and scrows etc. complete .as per the direction of directions of engineer in charge.300x16 mm " "providing and fixing ist quality ceramic glazed wall tiles conforming to is 15622 thickness to be specified by the manufacturer of approved make somany or kajaria or nitco in all colours shades except burgundy bottle green black of any size as approved by engineer in charge in skirting risers of steps and dados over 12 mm thick bed of cement mortar 1 isto 3 1 cement 3 coarse sand and jointing with grey cement slurry at the rate 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. make isto somany or kajaria or nitco or asian or as per direction of eic" "providing and laying vitrified floor tiles in different sizes thickness to be specified by the manufacturer with water absorption less than 0.08percent and conforming to is 15622 of approved make in all colours and shades laid on 20mm thick cement mortar 1 isto 4 1 cement 4 coarse sand jointing with grey cement slurry at the rate 3.3 kg or sqm including grouting the joints with white cement and matching pigments etc. complete. size of tile 600x600 mm make somany or kajaria or nitco or asian or as per direction of eic" "providing and fixing water closet squatting pan indian type w.c.pan with 100 mm sand cast iron p or s trap 10 litre low level white p.v.c. flushing cistern including flush pipe with manually controlled device handle lever conforming to is 7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required white vitreous china orissa pattern w.c. pan of size 580x440 mm with integral type foot rests preferable make hindware or parrywair or hindustan or cera or direction of eic" "providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and c.p. brass spreaders with brass unions and g.i clamps complete including painting of fittings and brackets cutting and making good the walls and floors wherever required one urinal basin with 5 litre white p.v.c. automatic flushing cistern preferable make hindware or parrywair or hindustan or cera or direction of eic" "providing and fixing wash basin with c.i. brackets 15 mm c.p. brass pillar taps 32 mm c.p. brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever require isto white vitreous china wash basin size 630x450 mm with a single 15 mm c.p. brass pillar tap" "providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c. waste fittings complete. semi rigid pipe 32 mm dia" providing and fixing 600x450 mm beveled edge mirror of superior glass of approved quality complete with 6 mm thick hard board ground fixed to wooden cleats with c.p . brass screws and washers complete. "providing and fixing brass bib cock of approved quality 15 mm nominal bore" "providing and fixing brass stop cock of approved quality 15 mm nominal bore" providing and fixing circular or hexagonal cast iron or m.s. sheet box for ceiling fan clamp of internal dia 140 mm 73 mm height top lid of 1.5 mm thick m.s. sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron or m.s. sheet box by means of 3.3 mm dia round headed screws one lock at the corners. clamp shall be made of 12 mm dia m.s. bar bent to shape as per standard drawing. providing and fixing isi marked oxidised m. s handles conforming to is 4992 with necessary screws etc. complete 125 mm providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc. complete. providing and fixing is 12817 marked stainless steel butt hinges heavy weight with stainless steel screws etc. complete 100x60x2.50 mm "providing and fixing g.i. pipes complete with g.i. fittings including trenching and refilling etc. for external work a. 15 mm dia nominal bore preferable make tata or jindal or as per direction of eic" "providing and fixing g.i. pipes complete with g.i. fittings including trenching and refilling etc. for external work b. 20 mm dia nominal bore preferable make tata or jindal or as per direction of eic" providing and fixing g.i. pipes complete with g.i. fittings including trenching and refilling etc. for external work d. 50 mm dia nominal bore preferable make tata or jindal or as per direction of eic "providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is 13592 type a including jointing with seal ring conforming to is 5382 leaving 10 mm gap for thermal expansion single socketed pipes. 110 mm diameter" "providing and fixing gun metal gate valve with c.i. wheel of approved quality screwed end isto 20 mm nominal bore" "providing and fixing gun metal gate valve with c.i. wheel of approved quality screwed end isto 50 mm nominal bore" providing and placing on terrace at all floor levels polyethylene water storage tank is isto 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet outlet and overflow pipes but without fittings and the base support for tank. providing and fixing 100 mm sand cast iron grating for gully trap constructing brick masonry chamber for underground c.i. inspection chamber and bends with bricks in cement mortar 1 isto 4 1 cement 4 coarse sand c.i. cover with frame light duty 455x610 mm internal dimensions total weight of cover with frame to be not less than 38 kg weight of cover 23 kg and weight of frame 15 kg r.c.c. top slab with 1 isto 1.5 isto 3 mix 1 cement 1.5 fine sand isto 3 graded stone aggregate 20 mm nominal size foundation concrete 1 isto 5 isto 10 1 cement 5 fine sand 10 graded stone aggregate 40 mm nominal size inside plastering 12 mm thick with cement mortar 1 isto 3 1 cement isto 3 coarse sand finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets isto with common burnt clay f.p.s. non modular bricks of class designation 7.5 "constructing masonry chamber 30x30x50 cm inside in brick work in cement mortar 1 isto 4 1 cement isto 4 coarse sand for stop cock with c. i. surface box 100x100 x75 mm inside with hinged cover fixed in cement concrete slab 1 isto 2 isto 4 mix 1 cement isto 2 coarse sand isto 4 graded stone aggregate 20 mm nominal size i or c necessary excavation foundation concrete 1 isto 5 isto 10 1 cement isto 5 fine sand isto 10 graded stone aggregate 40mm nominal size and inside plastering with cement mortar 1 isto 3 1 cement isto 3 coarse sand 12mm thick finished with a floating coat of neat cement complete as per standard design isto with common burnt clay f.p.s. non modular bricks of class designation 7.5" providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level isto 1 isto 1.5 isto 3 1 cement isto 1 coarse sand zone iii 3 graded stone aggregate 20 mm nominal size making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and s.w. drain pipe 100 mm diameter 1.8 m long complete as per standard design. with common burnt clay f.p.s. non modular bricks of class designation 7.5 "cement concrete flooring 1 isto 2 isto 4 1 cement isto 2 coarse sand isto 4 graded stone aggregate finished with a floating coat of neat cement including cement slurry but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate" "providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm plus 0.05 percent total coated thickness zinc coating 120 grams per sqm as per is 277 in 240 mpa steel grade 5 to 7 microns epoxy primer on both side of the sheet and polyester top coat 15 to 18 microns using self drilling or self tapping screws complete ridges plain 500 to 600mm " "providing and fixing precoated galvanised iron profile sheets size shape and pitch of corrugation as approved by engineer in charge 0.50 mm plus 0.05 percent total coated thickness with zinc coating 120 grams per sqm as per is 277 in 240 mpa steel grade 5 to 7 microns epoxy primer on both side of the sheet and polyester top coat 15 to 18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineerin charge. the sheet shall be fixed using self drilling or self tapping screws of size 5.5 x 55 mm with epdm seal complete upto any pitch in horizontal or vertical or curved surfaces excluding the cost of purlins rafters and trusses and including cutting to size and shape wherever required." providing and fixing of glass panes with putty and glazing clips in steel doors and windows all complete with 4mm thick glass panes etc. complete. supply of led tube light fittings .make c.g. or philips fixing of led tube light fittings including supply of all hardwares as required. led fitting will be supplied by contractor. make c.g. or philips supply of 48 sweep ceiling fan complete with down rod.clamp canopy etc. fixing of 48 sweep ceiling fan complete with down rod.clamp canopy etc.fan hardwares required for fixing for i.e. nut bolts clamp screws etc wiil be supplied by contractor. supply and fixing of stepped type electronic fan regulator on existing switch board. wiring for light point fan point exhaust fan point with 1.5 sqmm frls pvc insulated copper conductor single core cable in consield with modular switch modular plate suitable gi box and earthing the point with 1.5 sqmm frls pvc insulated copper conductor cable as required. supply of frls pvc insulated copper conducter single core cable of size 6 sqmm. make havells or kei or polycab or national wiring for circuit or submain wiring along with earth wire with the following sizes of frls pvc insulated copper conductor single core cable in consield or recessed medium class pvc conduit in concield as required 2 x 6 sqmm plus 1 x 6 sqmm earth wire. all the three colours should be red blue and green supply and fixing of utility db p or s 20a dp metal plug and socket distribution board grey make anchor or havells supply and installation of three phase industrial box with 32 amp 4 pole mcb and 5 pin top plug. make neptune or reputed make supply of frls pvc insulated copper conducter single core cable of size 10 sqmm. make havells or kei or polycab or national wiring for circuit or submain wiring along with earth wire with the following sizes of frls pvc insulated copper conductor single core cable in surface or recessed medium class pvc conduit in concield as required 4 x 10 sqmm + 1 x 10 sqmm earth wire.all the five colours should be red blue yellow black and green preparation of earth pit with supply of all materials including 3m long 3.64mm thick perforted gi tube with salt and charcol in alternate layer and brick chamber at the top with chequered plate 6mm thick as per is 3043 with latest. supply and laying 25mm x 5 mm gi strip at 0.5 meter below ground or wall including connection with electrode with db. supply of all hardware are in scope of contractor supply ans fixing of surface mounting vertical type 415 volts tpn mcb distribution board of sheet steel dust proctected duly power coated painted inclusive 200 amp tinned copper bus bar common neutral link earth bar din bar for mounting mcb with provision of 100 amp tpn mccb as incomer interconnection between incomer mccb and busbar. supply and fixing of 5 to 32 amp rating 240 or 415 volt mcb suitable as per load. supply and fixing of four pole 100 amp rating 415 volt 16 ka mccb . laying of 1.1kv grade pvc al.cable of size 2 or 3 or 3.5 or 4c 2.5 or 6 or 10 or 16 or 25 or 35 sq.mm in underground trench of 760mm deepx760mm wide in single tier formation including trench excavation and back filling with bricks 15brick or m and sand protection route marker. road or concreete or bolder cutting and finishing the road to its original shape are in the scope of the contractor. supply and fixing of street light on wall including supply of all necessaryu hardware for fixing of fitting on wall. supply and fixing of bulk head fitting on wall including supply of all necessaryu hardware for fixing of fitting on wall. supply installation and commissioning of exhaust fan of size 300 mm dia. this includes cutting of wall and finishing and supply of hardware like nut bolts etc. make crompton

Central Government/Public Sector

TRN :34404930 | 10 May, 2025

Tender Value : 0

North 24 Paragana - West Bengal

Tender for gem bids for pipe bracket bracket spacer disc plate bearing ball lock washer screw lock guide coller spring bushing lock ring snap ring snap retainer pin link hub pressure plate assy seal oil gasket gasket bushing pin bearing bearing roller pin stud ring snap lock link bolt shaft drive drum inertia brake retainer booster lever assy seal oil gasket o ring o ring gasket gasket gasket o ring screw relief valve assy seal oil circlip bearing needle knob knob knob lever (fwd & rev) pin cotter pin cotter pin cotter nut lever gear shift joint bolt reamer nut nut lever main clutch spring seat rod rod yoke inter lock assy bearing needle lever lever hose hose hose hose stud seat clamp clamp clamp clamp seat elbow tube tube tube tube tube gasket gasket o ring bolt joint bolt tube tube pin dowel valve assy o ring o ring seal oil o ring seal lock joint ring snap pin bearing spherical plug ring bearing roller ring seal cage o ring o ring o ring screw screw pin dowel key key ring seal holder screw set collar cage bearing cover shim assy bearing roller gear driven forward gear (driven forward) gear driven reverse gear (driven reverse) gear coupling (5m) gear guide (5m) gear guide (6mm) gear coupling (6mm) gear driven 1st gear driven 2nd collar collar ring snap race inner race inner race inner race inner bushing spacer bearing roller gear driven 3rd gear driven 4th shaft intermidiate bearing assy collar collar holder collar collar cover plunger interlock spring interlock seal oil gasket gasket shaft bushing bolt collar shaft lock pin dowel lock bushing screw . nut spring screw screw plate lock shaft gear shift 1 & 2 shaft gear shift fork f& r shaft gear shift 3 & 4 stopper plate fork gear shift 5th boss gear shift f& r lever gear shift 3 & 4 lever gear shift 1 & 2 lever gear shift f& r gear shift lever assy seal oil clamp clip boot gasket gasket cover

corporations/Associations/Others

TRN :34404969 | 12 May, 2025

Tender Value : 0

Dantewada - Chhattisgarh

Tender for gem bids for 1600046292 rotor p n 444332 , 1600011087 screw hex socket p n 283320-4 , 1600046296 screw hexhead p n 444637 , 1600046294 screw hexhead p n 444602 , 1600046312 lock washer p n 474235 , 1600046295 spring retainer p n 444603 , 1600019297 spring inner p n 2833182 , 1600046311 washer p n 474276 , 1600009704 repair kit hoist brake p n 2771250 , 1600000992 spring p n 2757150 , 1600008492 plug centring p n 2757184 , 1600046297 nut hx jam p n 297937 , 1600009202 disc friction kit p n 2890119 , 1600046301 screw hexhead p n 474232 , 1600008818 coupling coupling flexible p n 2872331 , 1600008209 diaphragm brake diaphragam p n 289326-6 , 1600046308 screw hexhead p n 444630 , 1600046309 washer lock .38 p n 037506 , 1600046305 stud p n 285721 , 1600008214 lining brake liner hoist p n 444593-7 , 1600046293 ring inner clamp p n 444600 , 1600046303 screw hexhead p n 414296 , 1600025544 rotor 4003853 , 1600008975 disc friction p n 4003845 , 1600046302 spring retainer p n 414294 , 1600001592 spring p n 4003993 , 1600046300 ring inner clamp p n 415611 , 1600046304 rotor brake hub p n 401341 , 1600010994 rotor rotor brake hub p n 4013409

Central Government/Public Sector

TRN :34405042 | 12 May, 2025

Tender Value : 0

Jabalpur - Madhya Pradesh

Tender for gem bids for c1 1005 557898 lug sling assy , c1 5340 180061 grip pistol left , c1 5340 180062 grip pistol right , c1 5305 057922 csk hd slotted screw m4 x 35 long to is , c1 5315 010038 pin , c1 1005 000718 holdall sa no 1 mk 1 , c1 1005 000744 lead flexible turn 14.0076 linned copper twin flexible cord , c1 5305 004282 stop screw rear sight cursor , c1 sk 1276 catch cocking handle , c1 1005 560617 guard hand upper assembly , c1 1005 007962 eliminator flash , c1 1005 118569 sleeve locking bipod , c1 1005 557933 plunger carrying handle , c1 1005 560703 spring recoil assembly , c1 1005 560705 butt , c1 5360 026792 spring carrying handle , c1 5315 001521 pin straight headed ejector , c1 5360 003082 sear spring , c1 5360 002923 ejector spring , c1 5320 000943 rivet back sight bracket , c1 5320 000953 rivet guide upper , c1 1005 560560 dovetail , c1 1005 007926 plate shoulder rest , c1 1005 000551 link piston extention , c1 5315 001518 pin retaining gas cylinder , c1 5320 001335 rivet solid ms csk hd 3.107x10.45mm , c1 5320 000948 rivet cocking hand guide locking shoulder , c1 3120 004671 collar mounting front , c1 5365 002039 ring retaining steel int 23mm , c1 1005 000696 spacer sleeve , c1 5305 004859 screw set socket hex no 1032 unf 2ax4.76 long half dog , c1 3120 004755 sleeve gas regulator , c1 5310 002663 washer key , c1 5315 001514 pin straight headed cartridge guide pawl , c1 5340 handle grip handle , c1 5360 007217 seating collar gas regulator sleeve , c1 4933 000435 insert b , c1 1005 557939 clamp cheek rest , c1 1005 008001 housing assembly , c1 4933 000434 insert a , c1 1005 557866 leaf sight assembly , c1 1005 557899 cover rear sight assembly , c1 3120 004655 ring front mounting bush , c1 5310 002662 securing nut gas regulator , c1 5360 006984 spring cover catch , c1 5360 003079 spring barrel locking catch , c1 1005 006633 extractor smallarms cartridge , c1 5305 004283 securing nut buffer assembly , c1 5310 010648 nut locking barrel no 5 , c1 5320 002939 rivet front guide short , c1 1005 000434 catch rear sight cursor 2p each , c1 1005 000475 body lower feed slide , c1 1005 000617 sear , c1 1005 006621 sight rear , c1 5360 002920 spring for bolt cover spring for spindle trigger frame , b1 5320 003104 rivet solid hinge cover , b1 5320 003099 rivet snap head block rear , b1 5305 018125 screw special , b1 5320 003096 rivet soild dovetail , b1 5320 003133 rivet soild channel left , b1 5320 003107 rivet soild spacer , b1 5315 009260 pin stright headless gas block , c1 1005 000400 fore sight blade front sight no 1 high , c1 1005 000631 excluder dust , c1 1005 000633 cam elevating , c1 1005 000636 plate retaining housing , c1 5315 001553 pin straight headless , c1 5320 002936 rivet front guide medium , c1 4933 000796 tool cleaning gas hole assembly , c1 4933 000804 locating piece for alignment of block rear , c1 4933 000806 fixture for block rear reveting lmg 5.56mm , c1 1005 557869 bracket rear fixed butt , c1 1005 560708 carrying handle assy , c1 5340 179982 handle cocking assy , c1 1005 560550 guard hand left modified , c1 1005 560559 guard hand right modified , c1 1005 000681 carrier recoil , c1 1005 000440 ejector opening cover

Central Government/Public Sector

TRN :34405270 | 10 May, 2025

Tender Value : 0

Jharsuguda - Orissa

Tender for gem bids for rotating unit complete_part no_rot001gst250300 , neck ring _suc and del_ set of 4no brnz_part no_1181 , bearing cartridge nde_part no_2601 , bearing cartridge de_part no_2600 , shaft _rh_ ss431t_part no_18001000 , shaft sleeve and nut _delivery_ ss410_part no_2102 , shaft sleeve and nut _suction_ ss410_part no_2103 , bearing housing _de_ ci_part no_2761gst250300 , bearing housing _nde_ ci_part no_2764gst250300 , intermediate bearing bush carrier ci_part no_2802 , intermediate bearing bushinter stage bu_part no_2801gst250300 , intermediate bearing sleeve _de_ ss410h_part no_2834 , intermediate brng sleeve _nde_ ss410h_part no_28341 , bearing end cover _nde_ outer 500gst_part no_2756500 , bearing end cover _nde_ inner 500gst_part no_2755500 , bearing end cover _de_ outer 500gst_part no_2753500 , bearing end cover _de_ inner 500gst_part no_2752500 , gland packing_part no_2410 , air vent cock_part no_4230 , flushing pipe_part no_4290 , gasket_part no_4080 , o ring _intermediate bearing sleeve_part no_42501 , o ring shaft sleeve_part no_4250 , sleeve nut ss410 _lh_part no_3031gst250300 , sleeve nut ss410 _rh_part no_3032gst250300 , lock nut _ms_part no_30101000 , lock washer _ms_part no_30201000 , key for coulping _ss410_part no_32501100 , key for impeller _ss410_part no_32001100 , thrust collar _en8_part no_28841100 , stuffing box bush _ltb5_part no_24021100 , impeller _ suction side _ lg2_part no_1506gst250300 , impeller _ delivery side _ lg2_part no_1509gst250300 , gland split_part no_2310500 , gland split _ ci_part no_2310gst250300

Central Government/Public Sector

TRN :34405412 | 16 May, 2025

Tender Value : 0

Kanpur - Uttar Pradesh

Tender for gem bids for bolt,anchor nut,collar, swage locking,washer,csk screw,washer pkg,lock (5920-r9-00149),screw,hexagone screw,hexagonal screw,screw,hexagon screw,hexagon screw,screw,rivet,screw,screw aevo 12770,screw,screw,screw,hexagone screw,screw,screw,screw,screw,hex,screw,screw,hex.screw.,screw,hex.screw.,hexagonal screw,screw,screw,screw,screw,screw,bolt(t/l),screw,screw,pip pin,screw,screw,split pin

Related Searched Keywords : lock washer

List of lock-washer Tenders

Get lock washer Tender Alert...

Related Searched Keywords : lock washer

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us