Filters

List of mixed-flow-pump Tenders

List of latest mixed-flow-pump Tenders in Indian Tenders. Click on any mixed-flow-pump Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for mixed-flow-pump Tenders.

All-Tenders (7)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :49020265 | 13 May, 2025

Tender Value : 17.34 Lacs

Delhi - Delhi

Tender for e.i.u.s. (revenue) providing and laying cc pavement over existing deteriorated cc pavements and raising of drains in jj cluster a - block, jahangirpuri (pid-16722).- 1 demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge.nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 2 demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge.nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) 3 demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. in cement mortar 4 desilting of nallah / drain in running flow and under foul condition for depth not exceeding 1.50 metre . including removal of stones , brickbats, garbage, silt mud, polythene , sewage if any etc. and diversion of flow of sludge if required and removing the same away from cluster at the place as directrd by engineer-in-charge. disposed silt to be levelled and neatly dressed. 5 earth work in excavation by mechanicalmeans (hydraulic excavator)/manual means in foundation trenches or drains (not on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil a directed, within a lead of 50 m. all kinds of soil. 6 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size). 7 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-iii): 10 graded stone aggregate 40 mm nominal size). 8 providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of r.m.c. from transit mixer to site of laying and curing, excluding the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per is : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the engineer-in-charge.” note : excess/less cement used than specified in this item is payable/ recoverable separately all works upto plinth level : m-15 grade plain cement concrete (cement content considered @ 240 kg/cum) 9 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:4(1 cement : 4 coarse sand) 10 half brick masonry with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundations and plinth in :cement mortar 1:4 (1 cement : 4 coarse sand) 11 12 mm cement plaster of mix :1:4 (1 cement: 4 coarse sand) 12 neat cement punning. 13 providing and fixing factory made precast rcc perforated drain covers, having concrete of strength not less than m-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional t.m.t. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with m.s. flats of size 50 mm x 1.6 mm complete, all as per direction of engineerin- charge. 14 providing and fixing non a.c. multipurpose fiber cement board strips in joints of cement concrete pavements. 50mm+- 5mm wide and 6mm thick having normal length not less than 90cm. 15 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level :1:5:10 (1 cement : 5 coarse sand (zone-iii): 10 graded stone aggregate 40mm nominal) manufactured sand derived from recycled concrete aggregate (rca): 10 graded stone aggregate 40 mm nominal size). 16 providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering. all work upto plinth level. 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including manufacture sand derived from recycled concrete aggregate (rca) upto 25% 4 graded stone aggregate 20mm nominal size including recycled concrete aggregate (rca) upto 25% 17 providing and laying dry brick aggregate 40mm nominal size in foundation and plinth or under floors at all level including spreading and ramming in layers as directed by engineer-in-charge 18 suply of earth and banking the same in layer not exceeding 20 cm indepth braking clods watering rollieach layr with 182 tonne roller of wooden or steel rammer including dressing up in embankment for rods, foloods banks, guide banks or filling of ground depressions with all lead and lift etc. complete. 19 add for cost index @35.22 %as per order by gnctd. except item no.15 and 16 (i.e. on 3987.30+6608.75 = rs.10596.05) 20 deduct 9.50% as per gnctd

State Government

TRN :49023008 | 15 May, 2025

Tender Value : 97.85 Lacs

Gautam Buddha Nagar - Uttar Pradesh

Tender for tender for landscaping of park p-1 sector -28 with two year maintenance yeida. wc-h - clearing grass and removal of the rubbish up to a distance of 50 m out side the periphery of the area cleared. 2 ploughing the existing ground to a depth of 15cm to 25cm and watering the same . 3 rough dressing the trenched ground including breaking clods. 4 uprooting weeds from the trenched area after 10 to 15days of its foolding with water including disposal of uprooted vegetation. 5 fine dressing of the ground. 6 digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ration of 2:1 by volume ( part of stacked volume of earth afte reduction by 20% : 1 part of stacked volume of manure after reduction by 8% ) follding with water dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) 7 holes 60cm dia, and 60cm deep 8 holes 45cm dia and 45cm deep 9 supplying of chlorpyriphos 20% e.c/ lindane 20% e.c for anti termite treatment of plants @ 2ml./plant and in the interval 1 month up to one year i.e, 12 times in a year hence it comes 24ml/plant or 0.024ltr/plant. 10 supply and stacking of well decayed cattle manure at site including roylty and carriagge up to 5km lead complete. ( cattle manure measured in stacks will reduced by 8% for payment) 11 spreading sludge dump manure and/ or good earth in required thickness as per direction of officer in charge ( cost of sludge, dump manure and/ or directed by the officer in charge. 12 mixing earth and sludge or manure in the required proportion specified or directed by the officer in charge. 13 supply and stacking of selection no. 1/doob grass at site fresh & free from weeds having proper roots in green including loading, unloading carriage and all taxes paid etc. and as per direction of officer in charge. 14 grassing with selection no. 1/ doob grasss including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed ( the grass and good earth shal be paid for separately). 15 preparation of beds for hedging and shurbbery by excavation 60 cm deep and trenching the excavated base to a further depth of 30cm, fefilling the excavated earth after breaking clods and mixing with sludge or mnaure in the ratio of 8:1 (part of stacked volume of earth after reductin by 20% : one part of stacked volume of sludge or manure after reduction by 8% ), flooding with water, filling with earth if necessary watering ad finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as derected within a lead of 50m lift up to 1.5m complete (cost of sludge, manure or extra a lead of 50m, lift up to 1.5m complete (cost of sludge, manure or extra earth to be paid for separately) 16 providing and stacking of duranta golden having ht. 15 to 20cm bushty shape with fresh and healthy leaves in 15cm size of earthen pot/plastic pot & as per direction of the officer in charge. (dsr-18, 6.12pg. no.153) 17 providing and stacking of fucus panda golden of height 45-60cm with 6-7 branches and healthy foliage in p.bag of size 25cm as per direction of the officer in charge. (dsr-18, 8.27pg. no.175) 18 supply of gypsm well packed at site in bags. 19 supply of dap at site in printed plasic bags. (market rate.) 20 supply & planting of plants common varieties as required by engineering incharge in 5 kg poly bags or earthen pots ( not below than 8-10 ) well branched and fully foliage branching dia 0.75 to 1.00mtr. free from disease at site i/c stacking with bamboos(chakresia, site ashok, kusum, gulmohar, amaltash) 21 providing and displaying ficus retusa topiary wall developed with fresh and healthy 5 to 6 big ball spedific size and shape 180 cm to 210cm g in 40cm cement potas per direction of the officer in charge (dsr-18, 5.24 pg. no. 145) 22 providing and stacking of bottle palm of ht. 270-300cm bottom girth 30-35cm well developed in big hdpe bags 23 supply & planting of shrubs plants height 2-2.5 feet as required by engineering incharge in 6x8 polythene bags or earthen pot fully foliage and well branched free from disease. shrubs (himalia, chandni ticomaor as direction by e/i etc.) 24 providing and displaying furcaria variegated hybrid well developed with fresh and healthy foliage 20cm and above atractive leaves in 35cm cement potas per direction of the officer in charge (dsr-18, 5.31pg. no. 147) 25 providing and stacking of alternanthera species of height 15cm to 20cm full of brnaches and foliages in 15cm size of earthen pot/plastic pot & as per direction of the officer in charge. (dsr-18, 6.20pg. no. 153) 26 providing and stacking of lpomea (golden leaves) with fresh and healthy leaves in 15cm size of earthen pot/plastic pot & as per direction of the officer in charge. 27 providing and stacking of syngonium (butterfly) variegated with 2-3 suckers healthy foliage in earthen pot/plastic pot as per direction of the officer in charge.(dsr-18, 6.15pg. no.153) 28 providing and stacking of wedelia trilobata, full of leaves in 15cm size of poly bags & as per direction of the officer in charge.(dsr-18, 6.26pg. no.153) 29 providing and stacking of pinus longifolia (pinus) of height 90-105cm in cement pot of size 35cm as per direction of the officer in charge (dsr-18, 7.65 pg. no.165) 30 earth work in excavation by mechanical means (hydraulic excavator) manual means in foundation trenches or drains ( not exceeding 1.5m in width or 10sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50mall kinds of soil 31 providing laying, jointing and testing of pvc(finolex make ring fit) of following dia 6kh/cm2 including all specials & fittings etc. as required for proper completion of work (the contractor has to arrange the source of water and require head for testing). (ar/yeida). 32 providing and fixing of hydrant with gate valve and all the fittings etc. complete. 32mm dia 33 complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, hergs, edge, flower beds, foliages, creepers etc. including hoeing, weeding, purning, replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers ( whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office in charge ( cost of good earth, manure , fertilizer, insecticide pesticide will be provided by the department & lawn mover and brush cutter with fuel and other t & p material / articles shall be provided by the contractor.) and as per direction of officer in charge. 34 play grounds/public parks ( mali for 2.00acre.) 35 boring of tubewell with: supplying assembling, lowering and fixing in vertical position in bore well, unplasticized pvc medium well casing (cm) pipe of required dia, conforming to is: 12818 , including required hire and labour charges, fittings & accessories etc. all complete for all depths, as per direction of engineer in charge. 36 providing profuse watering arrangement for lawn/park at site to make avialable for irrigation i.e. diesel engien & oil etc, rh pipe/ canvas pip & other t&p etc. in the proces of watering submerisible pump & accessories as per direction of officer in charge of work. 37 preparation of mounds of various size and shape by available excavated/supplied earth in layers not exceeding 20cm in depth breaking clods, watering of each layer dressing etc, lead upto 50mtr and lift upto 1.5m complete as per direction of officer in charge. 38 supply ofgood earth work , banking excavaated earth in layers not exceeding 20 cm in depth, breaking clods watering, rolling each layer with 1/2 tonnes roller or wooden or steel rammerand dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, all leads as per(a.r. )for all kind of soil. 39 plantation of seasonal two times on road side (0.45mtrwide bed) including making of bedas direction of engineer in charge complete item. 40 providing of seasonal seedlings including supply of seasonal seedling labour etc complete. 41 m/o seasonal/hedge of ground cover park including weeding hoeing and puring cutting in required shape etc. of ground bed complete itemand watering of seasoanl flowersincluding source of water pol etc. complete. 42 chair bench: supply of rcc chair bench with back rest of size 1500mm width x 1000mm height. reinforced suitably to promote long use and to prevent damage during handling, transportation, & erection. manufactured by using m-30 grade of concrete. 43 supply and fixing of dustbin set of 3capacity-80 ltr size -400x400 top , 300x 300 botto,, 900mm ht. stand made up of isi marked sq , pipe of 35mm x 35mm x 18 gauge power coated size-4.5’ x 1.5’ x 750mm(all complete) (as approved by e&i) 44 providing and laying in position cement concrete of specified grade excluding grade excluding the cost of centering and shuttering all work up to plinth level 1:2:4 corse sand 20 mm stone aggregate (sor based on dar 18 / 4.1.13)

State Government

TRN :49023607 | 16 May, 2025

Tender Value : 22.62 Lacs

Lucknow - Uttar Pradesh

Tender for tender for construction and renovation work of community center located in sector-d of kanpur road scheme - rcc repairs 2 chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of engineer-in-charge. 3 75mm average thickness 4 50mm average thickness 5 25 mm average thickness 6 cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of engineer-in-charge. 7 bars upto 12 mm diameter 8 bars above 12 mm diameter 9 drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in rcc beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of engineer-in-charge.upto and including 12mm dia. 10 providing, mixing and applying bonding coat of approved adhesive on chipped portion of rcc as per specifications and direction of engineer-in-charge complete in all respect.epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make 11 providing, mixing and applying sbr polymer (of approved make) modified cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of engineer-in-charge.note: measurement and payment: the pre-measurement of thickness shall be done just after the surface preparation is completed and payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 n/sqmm2). 12 25 mm average thickness in 2 layers. 13 50 mm average thickness in 3 layers. 14 providing and laying sbr polymer modified (of approved make @ minimum 2% by wt. of cement used) plain/reinforced concrete jacket for the structuralmembers e.g. columns, pillars, piers, beams etc with concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria] with specified average thickness all-round existing core of rcc member.note: rates shall be for finished surface area of concrete and shall include the cost of making holes in existing rcc slab, if required, for pouring concrete in shuttering mould of jacket and appropriate approved super-plasticiser forrendering concrete as flowable self compacting and sbr polymer but shall exclude cost of reinforcement, bond coat, shear keys, centering and shuttering, strutting, propping etc (payment under this item shall be madeonly after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument) 15 50mm thick in grade m 25 with cement content not less than 330 kg per cum 16 75mm thick in grade m 25 with cement content not less than 330 kg per cum 17 100mm thick in grade m 25 with cement content not less than 330 kg per cum 18 providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of engineer-in-charge.(the payment shall be made on the basis of actual weight of approved grout injected.) 19 epoxy injection grout in concrete/rcc work of approved make 20 providing, erecting, maintaining and removing temporary protective screens made out of specified fabric with all necessary fixing arrangement to ensure that it remains in position for the work duration as required by the engineerin- charge.wooven pvc cloth 21 shotcreting r.c.c. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stoneaggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by engineer- in-chargenote: rates shall include the providing necessary ground wires etc. the levelling gauges, if used, shall be paid for separately. payment under this item shall be made only after proper wet curing has been done and surface hasbeen satisfactorily evaluated by sounding/tapping with a blunt metal instrument. 22 50mm thick in grade m 25 with cement content not less than 330 kg per cum 23 75mm thick in grade m 25 with cement content not less than 330 kg per cum 24 providing and inserting 12mm dia galvanised steel injection nipple in honey comb area and along crack line including drilling of holes of required diametre (20mm to 30mm) up to depth from 30mm to 80mm at required spacing and making the hole & crack dust free by blowing compressed air, sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure complete as per direction of engineer-in-charge. 25 providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of l shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by engineer-in-charge. 26 mild steel or iron work in plain work such as in r.c.c. or r.b. (when not included in an over all rates ) including bending for proper completion of the workand including supply of steel and its wastage , bends, hooks and authorised overlaps shall be measured up to floor two level. 27 centering and shuttering including strutting, propping etc. and removal of form for : lintels, beams, plinth beams, girders, bressumers and cantilevers 28 centering and shuttering including strutting, propping etc. and removal of form for : columns, pillars, piers, abutments, posts and struts 29 centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thic 30 waterproofing and terracing 31 providing and laying in situ five course water proofing treatment with app (atactic polypropylene) modified polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd & 4th courses of bonding material @ 1.20 kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to is : 702, 3rd layer of roofing membrane app modified polymeric membrane 2.0 mm thick of 3.00 kg/ sqm weight consisting of five layers prefabricated with centre core as 100 micron hmhdpe film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron hmhdpe film. 5th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately). 32 cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate 33 miscellaneous works 34 providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, includingadditional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia m.s. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with m.s. tubes, m.s. tube challis, m.s. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. the scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of engineer-in-charge.note:- (1) the elevational area of the scaffolding shall be measured for payment purpose. (2) the payment will be made once only for execution of all items for such works. 35 disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of engineer-in-charge. 36 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in : cement mortar 1:6 (1 cement : 6 coarse sand) 37 cleaning of under ground sump, over head r.c.c. tank ( independent staging) including disposal of slit and rubbish, all as per direction of engineer-in-charge.the cleaning shall consist following operations:-(i) tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.(ii) entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water.(iii) chlorination of rcc internal surface by liquid chlorine.(iv) the treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.(v) finally the surface shall be treated with ultraviolet radiation etc. as per direction of engineer-in-charge. 38 door-window repair 39 renewing glass panes, with putty and nails wherever necessary including racking out the old putty: float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) 40 renewal of old putty of glass panes (length) 41 demolishing r.c.c. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead asper direction of engineer - in- charge. 42 extra for cutting reinforcement bars manually/ by mechanical means in r.c.c. or r.b. work (payment shall be made on the cross sectional area of r.c.c. or r.b. work) as per direction of engineer-in-charge. 43 demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. in cement mortar 44 dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :of area beyond 3 sq. metres 45 casement door double panel with french (false) mullion with zinc alloy (zamak) 3d hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides.using r4 series with frame (64 mm & above) x (55 mm & above) & sash (64 mm & above ) x (100 mm& above) & french (false ) mullion (64mm & above) x (60 mm & above). (height above 2.5 metre) 46 toughened glass 12 mm thickness 47 finishing work 48 dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 49 20 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) 50 removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete 51 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface toprepare the surface even and smooth complete. 52 finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade: new work (two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 53 distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : new work (two or more coats) over and including water thinnable priming coat with cement primer 54 applying priming coat:with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works 55 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :one or more coats on old work 56 washrooms 57 dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm 58 providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to is : 15622 of approved make in colours such as white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 59 providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:30 mm thick including isi marked stainless steel butt hinges with necessary screws 60 providing and fixing aluminium handles, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm 61 providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm 62 providing and fixing aluminium sliding door bolts isi marked anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :

State Government

TRN :49026540 | 12 May, 2025

Tender Value : 3.00 Lacs

Bundi - Rajasthan

Tender for works and water supply ; replacement of radial/mixed flow submersible motor pump sets and submersible monoblock pump set at rwss /jjy schemes pachipala under sub. div. lakheri tehsil indragarhdistrict - bundi (ubn code phe2526wsobrepair work of hand pumps located at urban water schemes of sub-division keshavrayapatan under block lakheri.(ubn code phe2526wsobrepair work of electric starter panel at various water schemes under sub-division k.patan of block lakheri(ubn code phe2526wsob

State Government

TRN :49026601 | 12 May, 2025

Tender Value : 4.85 Lacs

Bundi - Rajasthan

Tender for replacement of radial/mixed flow submersible motor pump sets and submersible monoblock pump set at rwss /jjy schemes pachipala under sub. div. lakheri tehsil - indragarh district - bundi (ubn code phe2526wsob

corporations/Associations/Others

TRN :34443247 | 12 May, 2025

Tender Value : 10.38 Lacs

Rajahmundri - Andhra Pradesh

Tender for operation and maintenance of all hsc and mixed flow type pumps in head water works of rmc for 2025-26

Central Government And Public Sector

TRN :34424401 | 12 May, 2025

Tender Value : 0

Srinagar - Jammu And Kashmir

Tender for annual rate contract for overhauling/repairs/replacement to various capacity horizontal/vertical turbine, and mixed flow pumps at various dewatering stations located in and around

Related Searched Keywords : mixed flow pump

List of mixed-flow-pump Tenders

Tender for replacement of radial/mixed flow submersible motor pump sets and submersible monoblock pump set at rwss /jjy schemes pachipala under sub. div. lakheri tehsil - indragarh district - bundi (ubn code phe2526wsob

Tender for operation and maintenance of all hsc and mixed flow type pumps in head water works of rmc for 2025-26

Tender for annual rate contract for overhauling/repairs/replacement to various capacity horizontal/vertical turbine, and mixed flow pumps at various dewatering stations located in and around

Get mixed flow pump Tender Alert...

Related Searched Keywords : mixed flow pump

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us