Filters

List of outer-ring Tenders

List of latest outer-ring Tenders in Indian Tenders. Click on any outer-ring Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for outer-ring Tenders.

All-Tenders (32)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

corporations/Associations/Others

TRN :36044224 | 24 Dec, 2025

Tender Value : 0

Ajmer - Rajasthan

Tender for gem bids for lot valve cap, lot outer o-ring

Central Government/Public Sector

TRN :36031568 | 23 Dec, 2025

Tender Value : 0

Panaji - Goa

Tender for gem bids for solderless insulated pin type copper lugs suitable for 075sqmm solderless insulated pin type copper lugs suitablefor 15 sqmm solderless insulated pin type copper lugssuitable for 25 sqmm solderless insulated pin type copperlugs suitable for 4 sqmm solderless insulated pin typecopper lugs suitable for 6 sqmm solderless insulated pintype copper lugs suitable for 10 sqmm solderlessinsulated pin type copper lugs suitable for 16 sqmm solderless insulated pin type copper lugs suitable for 25sqmm solderless insulated bootlace type copper lugssuitable for 05 sqmm solderless insulated bootlace typecopper lugs suitable for 075 sqmm solderless insulatedbootlace type copper lugs suitable for 1 sqmm solderlessinsulated bootlace type copper lugs suitable for 15 sqmm solderless insulated bootlace type copper lugs suitable for25 sqmm insulated ring type tongue terminal endcopper lugs suitable for 15 sqmm with 4mm ring dia hole insulated ring type tongue terminal end copper lugssuitable for 25 sqmm with 5mm ring dia hole insulatedring type tongue terminal end copper lugs suitable for 4sqmm with 52mm ring dia hole insulated ring typetongue terminal end copper lugs suitable for 6 sqmm with82mm ring dia hole insulated ring type tongue terminalend copper lugs suitable for 10 sqmm with 64mm ring diahole insulated ring type tongue terminal end copper lugssuitable for 16 sqmm with 82mm ring dia hole noninsulated ring type tongue terminal end suitable for 15sqmm with 6mm ring dia hole non insulated ring typetongue terminal end suitable for 25 sqmm with 8mm ringdia hole non insulated ring type tongue terminal endsuitable for 25 sqmm with 6mm ring dia hole noninsulated ring type tongue terminal end suitable for 10sqmm with 8mm ring dia hole non insulated ring type bid number gem2025b6955055 dated 02-12-2025 bid document1 73 0 0 tongue terminal end suitable for 10 sqmm with 10mm ringdia hole, non insulated ring type tongue terminal endsuitable for 10 sqmm with 12mm ring dia hole, noninsulated ring type tongue terminal end suitable for 16sqmm with 8mm ring dia hole, non insulated ring typetongue terminal end suitable for 25 sqmm with 8mm ringdia hole, non insulated ring type tongue terminal endsuitable for 50 sqmm with 10mm ring dia hole, noninsulated ring type tongue terminal end suitable for 70sqmm with 10mm ring dia hole, non insulated ring typetongue terminal end suitable for 95 sqmm with 10mm ringdia hole, non insulated ring type tongue terminal endsuitable for 120 sqmm with 10mm ring dia hole, noninsulated ring type tongue terminal end suitable for 185sqmm with 12mm ring dia hole, non insulated tubularterminal end suitable for 25 sqmm with 8mm ring dia hole, non insulated tubular terminal end suitable for 50 sqmmwith 8mm ring dia hole, non insulated tubular terminalend suitable for 70 sqmm with 10mm ring dia hole, noninsulated tubular terminal end suitable for 95 sqmm with12mm ring dia hole, non insulated tubular terminal endsuitable for 120 sqmm with 12mm ring dia hole, noninsulated tubular terminal end suitable for 185 sqmm with17mm ring dia hole, snap on terminals 1.5 sqmm, flameretardant non toxic heat shrinkable sleeves for 0.5 sq.mmred, flame retardant non toxic heat shrinkable sleeves for0.5 sq.mm yellow, flame retardant non toxic heatshrinkable sleeves for 0.5 sq.mm blue, flame retardantnon toxic heat shrinkable sleeves for 0.75 sq.mm red, flame retardant non toxic heat shrinkable sleeves for 0.75sq.mm yellow, flame retardant non toxic heat shrinkablesleeves for 0.75 sq.mm blue, flame retardant non toxicheat shrinkable sleeves for 1.5 sq.mm red, flameretardant non toxic heat shrinkable sleeves for 1.5 sq.mmyellow, flame retardant non toxic heat shrinkable sleevesfor 1.5 sq.mm blue, flame retardant non toxic heatshrinkable sleeves for 2.5 sq.mm red, flame retardantnon toxic heat shrinkable sleeves for 2.5 sq.mm yellow, flame retardant non toxic heat shrinkable sleeves for 2.5sq.mm blue, flame retardant non toxic heat shrinkablesleeves for 4 sq.mm red, flame retardant non toxic heatshrinkable sleeves for 4 sq.mm yellow, flame retardantnon toxic heat shrinkable sleeves for 4 sq.mm blue, flameretardant non toxic heat shrinkable sleeves for 6 sq.mmred, flame retardant non toxic heat shrinkable sleeves for6 sq.mm yellow, flame retardant non toxic heatshrinkable sleeves for 6 sq.mm blue, flame retardant nontoxic heat shrinkable sleeves for 10 sq.mm red, flameretardant non toxic heat shrinkable sleeves for 10 sq.mmyellow, flame retardant non toxic heat shrinkable sleevesfor 10 sq.mm blue, flame retardant non toxic heatshrinkable sleeves for 16 sq.mm red, flame retardant nontoxic heat shrinkable sleeves for 16 sq.mm yellow, flameretardant non toxic heat shrinkable sleeves for 16 sq.mmblue, flame retardant non toxic heat shrinkable sleevesfor 25 sq.mm red, flame retardant non toxic heatshrinkable sleeves for 25 sq.mm yellow, flame retardantnon toxic heat shrinkable sleeves for 25 sq.mm blue, flame retardant non toxic heat shrinkable sleeves for 50sq.mm red, flame retardant non toxic heat shrinkablesleeves for 50 sq.mm yellow, flame retardant non toxicheat shrinkable sleeves for 50 sq.mm blue, flameretardant non toxic heat shrinkable sleeves for 70 sq.mmred, flame retardant non toxic heat shrinkable sleeves for //bid details2 / 73 sq.mm yellow, flame retardant non toxic heatshrinkable sleeves for 70 sq.mm blue, flame retardantnon toxic heat shrinkable sleeves for 95 sq.mm red, flameretardant non toxic heat shrinkable sleeves for 95 sq.mmyellow, flame retardant non toxic heat shrinkable sleevesfor 95 sq.mm blue, flame retardant non toxic heatshrinkable sleeves for 120 sq.mm red, flame retardantnon toxic heat shrinkable sleeves for 120 sq.mm yellow, flame retardant non toxic heat shrinkable sleeves for 120sq.mm blue, flame retardant non toxic heat shrinkablesleeves for 185 sq.mm red, flame retardant non toxicheat shrinkable sleeves for 185 sq.mm yellow, flameretardant non toxic heat shrinkable sleeves for 185 sq.mmblue, stainless steel flexible conduit ul ce certified aisi-316 l stainless steel helical corrugated flexible conduits ofsize half inch, stainless steel flexible conduit ul cecertified aisi-316 l stainless steel helical corrugatedflexible conduits of size threeforth inch, stainless steelflexible conduit ul ce certified aisi-316 l stainless steelhelical corrugated flexible conduits of size inch 1, pvcflexible conduit pvc helical corrugated flexible conduits ofsize half inch, pvc flexible conduit pvc helical corrugatedflexible conduits of size threefourth inch, pvc flexibleconduit pvc helical corrugated flexible conduits of sizeinch 1, pg type cable entry glands double compressionbrass chromium nickel plated pg type cable entry glandssuitable for cable od 6-12 mm, pg type cable entry glandsdouble compression brass chromium nickel plated pg typecable entry glands suitable for cable od 10-14mm, g typecable entry glands double compression brass chromiumnickel plated pg type cable entry glands suitable for cableod 13-18 mm, pg type cable entry glands doublecompression brass chromium nickel plated pg type cableentry glands suitable for cable od 18-25 mm, pg type cableentry glands double compression brass chromium nickelplated pg type cable entry glands suitable for cable od 22-32 mm, pg type cable entry glands double compressionbrass chromium nickel plated pg type cable entry glandssuitable for cable od 30-38 mm, non-releasable nyloncable ties 75 mm x 2.5 mm, non-releasable nylon cableties 100 mm x 3.5 mm, non-releasable nylon cable ties 50mm x 4.7 mm, non-releasable nylon cable ties 200 mm x7.6 mm, non-releasable nylon cable ties 250 mm x 7.6mm, rubber grommets rubber grommets having thicknessof 20mm and suitable for panel thickness of 3 mm withouter dia 28 mm inner dia 20mm and panel hole dia 12mm, rubber grommets rubber grommets having thickness of20mm and suitable for panel thickness of 3 mm with outerdia 31 mm inner dia 23mm and panel hole dia 15mm, rubber grommets rubber grommets having thickness of20mm and suitable for panel thickness of 3 mm with outerdia 36 mm inner dia 28mm and panel hole dia 20mm, rubber grommets rubber grommets having thickness of20mm and suitable for panel thickness of 3 mm with outerdia 41 mm inner dia 33mm and panel hole dia 25mm, rubber grommets rubber grommets having thickness of20mm and suitable for panel thickness of 3 mm with outerdia 46 mm inner dia 38mm and panel hole dia 30mm

State Government

TRN :36035536 | 16 Dec, 2025

Tender Value : 7.26 Crore

Cuddalore - Tamil Nadu

Tender for permanent flood protection wall towards forming outer ring road on left bank of thillaiamman odai in chidambaram taluk of cuddalore district.

Central Government/Public Sector

TRN :36040261 | 24 Dec, 2025

Tender Value : 0

Haridwar - Uttaranchal

Tender for gem bids for procurement, 1-w90311123066-drg- 01112332200-outer ring forgbc lp-3l-ts, 2-w90311103065-drg- 01110339200-outer ring for gbc lp-3r-gs, 3-w90311123074-drg-01112332200- outer ring- for gbc lp-3l ts, 4-w90311123073-drg- 01110339200- outer ring-for gbclp-3r-gs, 5-w90311122078-drg-11112239200- outerring- for gbc lp-2l-ts, 6-w90311102077-drg-11110258200- outer ring- for gbc lp-2r-gs, 7-w90311122086-drg- 11112258200- outer ring- for gbclp-2l -ts, 8-w90311102085-drg- 11110239200- outerring for gbc lp-2r-gs, 9-ws9011123018-drg-01112358300- inner ring for gbc lp-3l, 10-ws9011103017-drg- 01110358300- inner ring for gbclp-3r, 11-ws9011122011-drg- 211122583000- innerring for gbc lp-2l, 12-ws9011102010-drg-21110258300- inner ring for gbc lp-2r

Central Government/Public Sector

TRN :36023257 | 22 Dec, 2025

Tender Value : 0

Mumbai - Maharashtra

Tender for gem bids for spring chrome plated packing cylinder 9 16 unc packup ring valve non return spiral wound joint 3 bore spiral wound joint 4 3 4 o d x 4 i d x0 175 thk joint 1 16 thk washer 1 2 joint spiral wound 4 3 4 od x 4 1 4 idx 175 th nut nyloc 3 8 gasket spiral wound 4 1 2 x4 x0 175 pacing soft sk hd capscrew 3 8 16 joint joint 1 32 thk joint 8 1 16 od gasket spiral wound 1 2 bore with outer ring dia 3 3 16 od joint spiral wound 1 4 bore spiral wound joint bore joint spiral wound 3 bore joint spiral wound 6 bore joint ring coupling union pressure guage 0 to 11 kg cm2 circlip seal dowty bonded 3 4 packing bottom packing top jiont wound 1 1 2 bore sprial bolt eye packing 3 8 sq jiont 1 64 thick 1 3 8 od x 1 id x 1 64 jiont 1 32 thick control valve joint joint 1 32 thk exh flange joint spiral wound 1 4 bore gasket packing cylinder 06 packing 01 no packing 1 2 sq packing 1 2 sq piston ring softpacking 1 4 sq o ring o ring o ring 5 94 o ring o ring 5 3 16 soft packing 5 14 sq spring pressure governor spring k o knob spring bush glacier 06 du 12 circlip plier spiral wound gasket 3 4 bore spiral wound joint joint packing 1 2 sq washer lock 1 1 2 bore valve non return plate restriction gland packing 3 8 sq gasket spiral wound 1 4 b0re joint 1 16 thick cover to liner joint 1 32 thick packing 1 8 sq screw 2ba spanner box type 7 16 1 2 unf nu lip ring seal 4 007

Central Government/Public Sector

TRN :36008824 | 19 Dec, 2025

Tender Value : 0

Port Blair - Andaman And Nicobar Islands

Tender for gem bids for ps piston ring gx kit 02093730 part no mh 02011048, aircleaner pa primary filter part no mh36500059, air cleanersecondary filter part no mh36500060, eng pa fg lf16061oil filter part no mh36313214, piston ring gx kit 02093730part no mh02009580, cable engine stop item codemh02643045, assembly turbo charger part nomh36313383, pedal accelerator part no mh 36500070, cable fwd rev hi low part no 71400003 59076399, alternator 12v 35amps part no 36313276, piston ring outerclutch ring part no 02010252, hose tlv to tilt cyl lh frontpart no 39550875, bearing drive axle hub inner part no54031762, gasket control cover housing part no 02014391, piston ring inner clutch ring part no 02010054, hose tlvto tilt cyl lh rear part no 39550877, piston part no02009986, gasket case cover plate part no 02014317, piston ring stator support part no 02009551, hose tlv totilt cylinder rh front part no 39550874, hose pump tosteering unit part no 39550863, sleeve oil distributor partno 02049539, hose tlv to tilt cylinder rh rear part no39550876, selector pack hilo or selector pack forwardreverse part no 02047197, hose danfoss unit to stgcylinder part no 39550864, piston ring oil distributor partno 02009580, trust washer part no 02010195, piston ringrear input shaft part no 02009564, clutch disc inner partno 02041025, clutch disc outer ar part no 02040619, oildistributor piston shaft part no 02011035, end plate partno 02020448, snap ring pinion shaft oil distributor part no53522582, bearing drive axle hub outer part no 5400059, seal kit for lift cylinder of 5 ton forklift, sheave item codemh 02205153, universal joint assy code mh 02098793, single brake valve part no mh 02099787, pneumatic servopart no mh 37200016, fork lock pin clip type part no mh38800580, spring gas part no mh 38600002, oil seal 39 7x 60 3 x 9 52, transmission overhauling service kit part nomh 02093730, roller bearing assembly code mh 02326191, side thrust roller code mh 02340436, transmissionassembly with axle adapartor part no mh02335360, control cover assy part no mh02018740, gasket controlcover housing part no mh 02014391, gasket transmissionto engine part no mh 02161129, bearing part no 54100356, oil seal part no mh02076458, automatic drain valve partno 02099761, silent block assy part no mh02161356, head light part no mh71500763, tail light lh part nomh71500764, tail light rh part no mh 71500765, ignitionswitch part no mh 71500275, assy clamping rod part nomh 36312233, bolt part no 36312244, spring part no mh36312246, bearing part no mh 02163839, roller part nomh 02168339, spherical bearing auto bush rotating partno mh02950307, catridge fuel water seperator part nomh36313378, rod end part no mh02319564, radiator partno mh 38150062, pump main part no mh97549660, steering unit danfoss ospc 160 part no mh39300009, starter motor part no mh36312241, knuckle pin part nomh02644639, thrust bearing on knuckle part nomh54080773, nut wheel mounting part no mh60300014, filter casting part no mh02219024, valve main walve oil 2spool part no mh39100160, lift cylinder canara 5500 mfgpart no mh39400857, fork assy 2000mm long part nomh97126891, water pump repair kit part no mh36313308, carriage assembly 2340 mm length, cable fwd rev hi lowpart no 71400003, pipe radiator part no 02006899, universal joint assy code mh 02098793 //bid details2 / 81

Central Government/Public Sector

TRN :35998288 | 18 Dec, 2025

Tender Value : 0

Haridwar - Uttaranchal

Tender for gem bids for 1-w90311123066-drg: 01112332200/01 rev: 01 finishmachined outer ring for 800mw gbc lp-3lts, 2-w90311123065-drg: 01110339200/01 rev: 03 finishmachined outer ring for 800mw gbc lp-3rgs, 3-w90311123074-drg: 01112332200/02 rev: 01 finishmachined outer ring for 800mw gbc lp-3lts, 4-w90311103073-drg: 01110339200/02 rev: 03 finishmachined outer ring for 800mw gbc lp-3rgs, 5-w90311122078-drg: 11112239200/00 rev: 02 finishmachined outer ring for 800mw gbc lp-2l ts, 6-w90311102077-drg: 11110258200/00 rev: 02 finishmachined outer ring for 800mw gbc lp-2rgs, 7-w90311122086-drg: 11112258200/00 rev: 03 finishmachined outer ring for 800mw gbc lp-2l ts, 8-w90311102085-drg: 11110239200/00 rev: 03 finishmachined outer ring for 800mw gbc lp-2rgs, 9-ws9011123018-drg: 01112358300/00 rev: 02 finishmachined inner ring for 800mw gbc lp-3l, 10-ws9011103017-drg: 01110358300/00 rev: 02 finishmachined inner ring for 800mw gbc lp-3r, 11-ws9011122011-drg: 211122583000/00 rev: 02 finishmachined inner ring for 800mw gbc lp-2l, 12-ws9011102010-drg: 21110258300/00 rev: 02 finishmachined inner ring for 800mw gbc lp-2r

corporations/Associations/Others

TRN :35999090 | 01 Jan, 2026

Tender Value : 0

Sonebhadra - Uttar Pradesh

Tender for supply of miscellaneous items - ht hex head full thread nut & bolt ; m16x65 mm, ht hex head full thread nut & bolt ; m16x70 mm, hthh bolt with nut & washer , half threaded m16x90 hex hd m18x70; ht 10.9 grade ms bolt & nut size 20x70 mm ht hex bolt & nut 20x80fth fluidizing pads for esp hoppers, size: 374 mm x 374 mm, no. of holes: 16, hole dia: 12 mm material: nomex (as per sample) "perforated ms plate, size: 374 mm x 374 mm, having 4.76 mm dia holes at 7.14 mm pitch giving 40.5 % open area plate thickness: 1.6 mm, no. of mounting holes: 16, hole dia: 12 mm (as per sample)" "submersible pump, make-kirloskar, model-eterna 1100 cw+ specification : power supply-415v, 3phaseac power rating-1.1kw/1.5hp max. solid handling size (mm) - 24 minimum submergence (mm) - 460 suction - from bottom size discharge outlet (mm) - 50 max. amb. temperature - 40 degree c discharge 366 to 84 lpm total head - 6 to 14 mtrs speed (nominal) 2800 rpm" "discharge tube with fmb(foam making branch) for mechanical foam extinguisher 50 ltr. discharge tube shall be braided rubber plastic of 3.5 mtr length & 12.5 mm internal dia. fitted with plastic fmb (is-7328) as per is-13386 the discharge hose shall have bu sting pressure of not less than 50 kg/cm². (as per sample)" "discharge tube for dcp(dry chemical powder) 05 kg extinguisher (plunger type). made of pvc. one end thread is provided to fit with dcp fire extinguisher (plunger type) capacity 5 kg and other end to discharge powder.(as per sample)" "discharge tube washer for dcp(dry chemical powder) 05 kg extinguisher (plunger type). made of rubber suitable to be fitted with discharge tube of dcp fire extinguisher (plunger type) capacity 05 kg.(as per sample)" "discharge tube for dcp(dry chemical powder) 10 kg extinguisher (plunger type). made of pvc. one end thread is provided to fit with dcp fire extinguisher (plunger type) capacity 10 kg and other end to discharge powder.(as per sample)" "discharge tube washer for dcp(dry chemical powder) 10 kg extinguisher (plunger type). made of rubber suitable to be fitted with discharge tube of dcp fire extinguisher (plunger type) capacity 10 kg.(as per sample)" "cap rubber washer for dcp(dry chemical powder) 75 kg extinguishers.made of rubber, suitable to fit in the cap assembly of dcp fire extinguisher capacity 75 kg.(as per sample)" "discharge tube for dcp 75 kg extinguishers. discharge tube/hose with nozzle squeeze grip aluminum lengths -5 mtr. suitable for dcp type fire extinguisher capacity-75 kg.(as per sample)" "washer for copper connecting tube 75kg dcp(dry chemical powder) extinguisher. made of rubber. suitable for fitting with copper conne cting tube of dcp 75 kg extinguisher.(as per sample)" "discharge tube for 9 ltr water type extinguishers (squeeze grip type). pvc braided tube/hose of length 400 mm. suitable for fitting within the thread of squeeze grip assembly of water type fire extinguisher capacity 9 litre (squeeze grip type).(as per sample)" "discharge tube washer for 9 ltr water type extinguishers (squeeze type). made of rubber. suitable to be fitted with discharge tube/hose of water type fire extinguisher (squeeze grip type) capacity 09 litre.(as per sample)" "port tube for 9 ltr water type extinguishers (squeeze grip type). port tube/actuator should be made of aluminium. suitable to fit inside cap assembly of water type fire extinguisher capacity 9 litre (squeeze grip type) for release of water when activated. as per sample)" "siphon tube for 9 ltr water type extinguishers (squeeze grip type). siphon tube suitable for 9 ltr. water type extinguishers (squeeze grip type).(as per sample)" "cap assembly for 9ltr water type extinguishers (squeeze grip type). it should include a brass forged valve and a squeeze grip for activation to facilitate the discharge of water. suitable to be fitted in 9l water type extinguishers (squeeze grip type).(as per sample)" "cap assembly washer for for 9 ltr water type extinguishers (squeeze grip type). as per is-15683 the washer shall be ring type make with synthetic rubber which outer dia. 65mm and inner dia. should be 55mm.(as per sample)" "port tube for 9 ltr mechanicl foam type extinguishers (squeeze grip type). port tube/actuator should be made of aluminium. suitable to fit inside cap assembly of foam type fire extinguisher capacity 9 litre (squeeze grip type) for release of extinguishing agent when activated.(as per sample)" "siphon tube for 9 ltr mechanical foam type extinguishers (squeeze grip type). siphon tube suitable for 9ltr. mechanical foam type extinguishers (squeeze grip type).(as per sample)" "carrying handle for co2 4.5 kg extinguishers. carrying handie should be made of mild steel and coated/covered with pvc, suitable to carry co2 4.5 kg extinguishers.(as per sample)" "discharge tube with horn for co2 22.5 kg extinguishers. discharge tube should be braided rubber plastic of 05 mtr. length & 10 mm internal dia, fitted with discharge horn, should be non conductor of electricity like polyethylene, fibre glass, with suitabl handle as per is-2878. the minimum bursting pressure shall be 275 kg/cm² in control discharge.(as per sample)" "discharge tube washer for co2 22.5 kg extinguishers.#made of pvc. suitable to be fitted with discharge tube of co2 22.5 kg extinguishers.(as per sample)" "discharge tube for dcp(dry chemical powder) 05 kg extinguisher (squeeze grip type). pvc braided tube/hose of length 400 mm. suitable for fitting within the thread of squeeze grip assembly of dcp type fire extinguisher capacity 05 kg. (squeeze grip type),( s per sample)" "discharge tube washer for dcp 05 kg extinguisher (squeeze grip type). made of rubber, suitable to be fitted with discharge tube of dcp fire extinguisher (squeeze grip type) capacity 05 kg.(as per sample)" "port tube for dcp(dry chemical powder) 05 kg type extinguishers (squeeze grip type).#port tube/actuator should be made of aluminium. suitable to fit inside cap assembly of dcp fire extinguisher capacity 05 kg. (squeeze grip type) for release of dcp when a ivated.(as per sample)" "siphon tube for dcp(dry chemical powder) 05 kg type extinguishers (squeeze grip type). siphon tube suitable for dcp 05 kg type extin guishers (squeeze grip type).(as per sample)" "cap assembly for dcp(dry chemical powder) 05 kg type extinguishers (squeeze grip type). it should include a brass forged valve and a squeeze grip for activation to facilitate the discharge of dcp. suitable to be fitted in dcp 05 kg type extinguishers (squeze grip type).(as per sample)" "cap assembly washer for dcp(dry chemical powder) 05 kg type extinguishers (squeeze grip type).#made of rubber. suitable to be fitted in washer dcp 05 kg type extinguishers (squeeze grip type).(as per sample)" .

Central Government And Public Sector

TRN :35978880 | 16 Dec, 2025

Tender Value : 0

Tirunelvelli - Tamil Nadu

Tender for supply of single row deep groove ball bearing (without flange outer ring) as per is 6455 (q3

Central Government/Public Sector

TRN :35984976 | 17 Dec, 2025

Tender Value : 24.9 Thousand

Singrauli - Madhya Pradesh

Tender for supply of single row deep groove ball bearing (without flange outer ring) as per is 6455 (q3)

Related Searched Keywords : outer ring

List of outer-ring Tenders

Tender for gem bids for lot valve cap, lot outer o-ring

Tender for permanent flood protection wall towards forming outer ring road on left bank of thillaiamman odai in chidambaram taluk of cuddalore district.

Tender for supply of single row deep groove ball bearing (without flange outer ring) as per is 6455 (q3

Tender for supply of single row deep groove ball bearing (without flange outer ring) as per is 6455 (q3)

Get outer ring Tender Alert...

Related Searched Keywords : outer ring

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us