List of latest p-v-c-flooring Tenders in Indian Tenders. Click on any p-v-c-flooring Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for p-v-c-flooring Tenders.
Tender for gem bids for clearing jungle including uclass="text-red-selected">prooting of rank class="text-red-selected">vegetation grass brush wood trees and saclass="text-red-selected">plings of girth uclass="text-red-selected">p to 30 cm measured at a height of 1 m aboclass="text-red-selected">ve ground leclass="text-red-selected">vel and remoclass="text-red-selected">val of rubbish uclass="text-red-selected">p to a distance of 50 m outside the class="text-red-selected">periclass="text-red-selected">phery of the area cleared. "suclass="text-red-selected">pclass="text-red-selected">plying chemical emulsion in sealed containers including deliclass="text-red-selected">very as sclass="text-red-selected">pecified. chlorclass="text-red-selected">pyriclass="text-red-selected">phos or lindane emulsifiable concentrate of 20 class="text-red-selected">percent" "diluting and injecting chemical emulsion for class="text-red-selected">post constructional anti termite treatment excluding the cost of chemical emulsion along external wall where the aclass="text-red-selected">pron is not class="text-red-selected">proclass="text-red-selected">vided using chemical emulsion at the rate 7.5 litres or sqm of the class="text-red-selected">vertical surface of the substructure to a declass="text-red-selected">pth of 300mm including excaclass="text-red-selected">vation channel along the wall and rodding etc. comclass="text-red-selected">plete isto with chlorclass="text-red-selected">pyriclass="text-red-selected">phos or lindane e.c. 20 class="text-red-selected">percent with 1 class="text-red-selected">percent concentration" "earth work in excaclass="text-red-selected">vation by mechanical means hydraulic excaclass="text-red-selected">vator or manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on class="text-red-selected">plan including dressing of sides and ramming of bottoms lift uclass="text-red-selected">pto 1.5 m including getting out the excaclass="text-red-selected">vated soil and disclass="text-red-selected">posal of surclass="text-red-selected">plus excaclass="text-red-selected">vated soil as directed within a lead of 50 m all kinds of soil." filling aclass="text-red-selected">vailable excaclass="text-red-selected">vated earth excluding rock in trenches class="text-red-selected">plinth sides of foundations etc. in layers not exceeding 20cm in declass="text-red-selected">pth consolidating each declass="text-red-selected">posited layer by ramming and watering lead uclass="text-red-selected">p to 50 m and lift uclass="text-red-selected">pto 1.5 m suclass="text-red-selected">pclass="text-red-selected">plying and filling in class="text-red-selected">plinth with sand under floors including watering ramming consolidating and dressing comclass="text-red-selected">plete. "class="text-red-selected">proclass="text-red-selected">viding and laying in class="text-red-selected">position cement concrete of sclass="text-red-selected">pecified grade excluding the cost of centering and shuttering all work uclass="text-red-selected">p to class="text-red-selected">plinth leclass="text-red-selected">vel 1 isto 3 isto 6 1 cement 3 coarse sand zone iii 6 graded stone aggregate 20 mm nominal size " "class="text-red-selected">proclass="text-red-selected">viding and laying in class="text-red-selected">position sclass="text-red-selected">pecified grade of reinforced cement concrete excluding the cost of centering shuttering finishing and reinforcement all work uclass="text-red-selected">p to class="text-red-selected">plinth leclass="text-red-selected">vel isto 1 isto 1.5 isto 3 1 cement 1.5 coarse sand zone iii 3 graded stone aggregate 20 mm nominal size " "reinforced cement concrete work in walls any thickness including attached class="text-red-selected">pilasters buttresses class="text-red-selected">plinth roof and string courses fillets columns class="text-red-selected">pillars class="text-red-selected">piers abutments class="text-red-selected">posts and struts etc. aboclass="text-red-selected">ve class="text-red-selected">plinth leclass="text-red-selected">vel uclass="text-red-selected">p to floor ficlass="text-red-selected">ve leclass="text-red-selected">vel excluding cost of centering shuttering finishing and reinforcement 1 isto 1.5 isto 3 1 cement 1.5 coarse sand zone iii 3 graded stone aggregate 20 mm nominal size " brick work with common burnt clay f.class="text-red-selected">p.s. non modular bricks of class designation 7.5 in foundation and class="text-red-selected">plinth in cement mortar 1 isto 6 1 cement 6 coarse sand brick work with common burnt clay f.class="text-red-selected">p.s. non modular bricks of class designation 7.5 in suclass="text-red-selected">perstructure aboclass="text-red-selected">ve class="text-red-selected">plinth leclass="text-red-selected">vel uclass="text-red-selected">p to floor class="text-red-selected">v leclass="text-red-selected">vel in all shaclass="text-red-selected">pes and sizes in cement mortar 1 isto 6 1 cement 6 coarse sand "half brick masonry with common burnt clay f .class="text-red-selected">p .s. non modular bricks of class designation 7.5 in suclass="text-red-selected">perstructure aboclass="text-red-selected">ve class="text-red-selected">plinth leclass="text-red-selected">vel uclass="text-red-selected">p to floor class="text-red-selected">v leclass="text-red-selected">vel. cement mortar 1 isto 4 1 cement 4 coarse sand " "centering and shuttering including strutting class="text-red-selected">proclass="text-red-selected">pclass="text-red-selected">ping etc. and remoclass="text-red-selected">val of form for foundations footings bases of columns etc. for mass concrete" "centering and shuttering including strutting class="text-red-selected">proclass="text-red-selected">pclass="text-red-selected">ping etc. and remoclass="text-red-selected">val of form for susclass="text-red-selected">pended floors roofs landings lintals beams balconies and access class="text-red-selected">platform" "steel reinforcement for r.c.c. work including straightening cutting bending class="text-red-selected">placing in class="text-red-selected">position and binding all comclass="text-red-selected">plete uclass="text-red-selected">pto class="text-red-selected">plinth leclass="text-red-selected">vel thermo mechanically treated bars of grade fe 500d or more make sail or tata or jindal " "15 mm cement class="text-red-selected">plaster on the rough side of single or half brick wall of mix isto 1 isto 6 1 cement isto 6 fine sand rates for external class="text-red-selected">plastic are for height uclass="text-red-selected">pto 10m from ground leclass="text-red-selected">vel in less otherwise stated cement make nuclass="text-red-selected">voco lafarge or ultratech or acc or as class="text-red-selected">per direction of eic " "12 mm cement class="text-red-selected">plaster of mix 1 isto 6 1 cement isto 6 fine sand rates for external class="text-red-selected">plastic are for height uclass="text-red-selected">pto 10m from ground leclass="text-red-selected">vel in less otherwise stated cement make nuclass="text-red-selected">voco lafarge or ultratech or acc or as class="text-red-selected">per direction of eic " "6 mm cement class="text-red-selected">plaster of mix 1 isto 3 1 cement 3 fine sand rates for external class="text-red-selected">plastic are for height uclass="text-red-selected">pto 10m from ground leclass="text-red-selected">vel in less otherwise stated cement make nuclass="text-red-selected">voco lafarge or ultratech or acc or as class="text-red-selected">per direction of eic " neat cement class="text-red-selected">punning. "finishing walls with class="text-red-selected">premium acrylic smooth exterior class="text-red-selected">paint with silicone additiclass="text-red-selected">ves of required shade new work two or more coats aclass="text-red-selected">pclass="text-red-selected">plied at the rate 1.43 ltr or 10 sqm oclass="text-red-selected">ver and including class="text-red-selected">priming coat of exterior class="text-red-selected">primer aclass="text-red-selected">pclass="text-red-selected">plied at the rate 2.20 kg or 10 sqm make dulux or burger or asian class="text-red-selected">paints or as class="text-red-selected">per direction of eic" white washing with lime to giclass="text-red-selected">ve an eclass="text-red-selected">ven shade new work three or more coats mix with feclass="text-red-selected">vicol ddl and robin blue or as class="text-red-selected">per direction of eic "class="text-red-selected">painting with synthetic enamel class="text-red-selected">paint of aclass="text-red-selected">pclass="text-red-selected">proclass="text-red-selected">ved brand and manufacture of required colour to giclass="text-red-selected">ve an eclass="text-red-selected">ven shade two or more coats on new work oclass="text-red-selected">ver an under coat of suitable shade with ordinary class="text-red-selected">paint of aclass="text-red-selected">pclass="text-red-selected">proclass="text-red-selected">ved brand and manufacture. class="text-red-selected">preferable make dulux or burger or asian class="text-red-selected">paints or as class="text-red-selected">per direction of eic make dulux or burger or asian class="text-red-selected">paints or as class="text-red-selected">per direction of eic" making class="text-red-selected">plinth class="text-red-selected">protection 50mm thick of cement concrete 1 isto 3 isto 6 1 cement 3 coarse sand zone iii 6 graded stone aggregate 20 mm nominal size oclass="text-red-selected">ver 75mm thick bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including necessary excaclass="text-red-selected">vation leclass="text-red-selected">velling and dressing and finishing the toclass="text-red-selected">p smooth "class="text-red-selected">proclass="text-red-selected">viding and fixing angle iron frames for doors windows and class="text-red-selected">ventilators of mild steel angle sections of size 35x35x5 mm joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat class="text-red-selected">pieces to the existing t iron frame or to the wall with dash fastener including fixing of necessary butt hinges and screws and aclass="text-red-selected">pclass="text-red-selected">plying a class="text-red-selected">priming coat of aclass="text-red-selected">pclass="text-red-selected">proclass="text-red-selected">ved steel class="text-red-selected">primer all comclass="text-red-selected">plete as class="text-red-selected">per the direction of engineer in charge. make sail or tata or jindal " "class="text-red-selected">proclass="text-red-selected">viding and fixing isi marked flush door shutters conforming to is isto 2202 class="text-red-selected">part i decoraticlass="text-red-selected">ve tyclass="text-red-selected">pe core of block board construction with frame of 1st class hard wood and well matched teak 3 class="text-red-selected">ply class="text-red-selected">veneering with class="text-red-selected">vertical grains or cross bands and face class="text-red-selected">veneers on both faces of shutters. 30 mm thick including isi marked stainless steel butt hinges with necessary screws" "structural steel work in single section fixed with or without connecting class="text-red-selected">plate including cutting hoisting fixing in class="text-red-selected">position and aclass="text-red-selected">pclass="text-red-selected">plying a class="text-red-selected">priming coat of aclass="text-red-selected">pclass="text-red-selected">proclass="text-red-selected">ved steel class="text-red-selected">primer all comclass="text-red-selected">plete. make sail or tata or jindal " 25 mm thick class="text-red-selected">pclass="text-red-selected">vc flush door shutters made out of a one class="text-red-selected">piece multi chamber extruded class="text-red-selected">pclass="text-red-selected">vc section of the size of 762 mm into 25 mm or less as class="text-red-selected">per requirement with an aclass="text-red-selected">verage wall thickness of 1 mm class="text-red-selected">plus or minus 0.3 mm . class="text-red-selected">pclass="text-red-selected">vc foam end caclass="text-red-selected">p of size 23x10 mm are class="text-red-selected">proclass="text-red-selected">vided on both class="text-red-selected">vertical edges to ensure the oclass="text-red-selected">verall thickness of 25 mm. m.s. tube haclass="text-red-selected">ving dimensions 19 mm into 19 mm and 1.0 mm class="text-red-selected">plus or minus 0.1 mm is inserted along the hinge side of the door. core of the door shutter should be filled with high density class="text-red-selected">polyurethane foam. the toclass="text-red-selected">p and bottom edges of the shutter are coclass="text-red-selected">vered with an end caclass="text-red-selected">p of the size 25 mm into 11 mm. door shutter shall be reinforced with sclass="text-red-selected">pecial class="text-red-selected">polymeric reinforcements as class="text-red-selected">per manufacturer sclass="text-red-selected">pecification and direction of engineer in charge to take uclass="text-red-selected">p necessary hardware and fixtures. stickers indicating the locations of hardware will be class="text-red-selected">pasted at aclass="text-red-selected">pclass="text-red-selected">proclass="text-red-selected">priate class="text-red-selected">places "class="text-red-selected">proclass="text-red-selected">viding and fixing isi marked oxidised m.s. sliding door bolts with nuts and scrows etc. comclass="text-red-selected">plete .as class="text-red-selected">per the direction of directions of engineer in charge.300x16 mm " "class="text-red-selected">proclass="text-red-selected">viding and fixing ist quality ceramic glazed wall tiles conforming to is 15622 thickness to be sclass="text-red-selected">pecified by the manufacturer of aclass="text-red-selected">pclass="text-red-selected">proclass="text-red-selected">ved make somany or kajaria or nitco in all colours shades exceclass="text-red-selected">pt burgundy bottle green black of any size as aclass="text-red-selected">pclass="text-red-selected">proclass="text-red-selected">ved by engineer in charge in skirting risers of steclass="text-red-selected">ps and dados oclass="text-red-selected">ver 12 mm thick bed of cement mortar 1 isto 3 1 cement 3 coarse sand and jointing with grey cement slurry at the rate 3.3kg class="text-red-selected">per sqm including class="text-red-selected">pointing in white cement mixed with class="text-red-selected">pigment of matching shade comclass="text-red-selected">plete. make isto somany or kajaria or nitco or asian or as class="text-red-selected">per direction of eic" "class="text-red-selected">proclass="text-red-selected">viding and laying class="text-red-selected">vitrified floor tiles in different sizes thickness to be sclass="text-red-selected">pecified by the manufacturer with water absorclass="text-red-selected">ption less than 0.08class="text-red-selected">percent and conforming to is 15622 of aclass="text-red-selected">pclass="text-red-selected">proclass="text-red-selected">ved make in all colours and shades laid on 20mm thick cement mortar 1 isto 4 1 cement 4 coarse sand jointing with grey cement slurry at the rate 3.3 kg or sqm including grouting the joints with white cement and matching class="text-red-selected">pigments etc. comclass="text-red-selected">plete. size of tile 600x600 mm make somany or kajaria or nitco or asian or as class="text-red-selected">per direction of eic" "class="text-red-selected">proclass="text-red-selected">viding and fixing water closet squatting class="text-red-selected">pan indian tyclass="text-red-selected">pe w.c.class="text-red-selected">pan with 100 mm sand cast iron class="text-red-selected">p or s traclass="text-red-selected">p 10 litre low leclass="text-red-selected">vel white class="text-red-selected">p.class="text-red-selected">v.c. flushing cistern including flush class="text-red-selected">piclass="text-red-selected">pe with manually controlled declass="text-red-selected">vice handle leclass="text-red-selected">ver conforming to is 7231 with all fittings and fixtures comclass="text-red-selected">plete including cutting and making good the walls and floors whereclass="text-red-selected">ver required white class="text-red-selected">vitreous china orissa class="text-red-selected">pattern w.c. class="text-red-selected">pan of size 580x440 mm with integral tyclass="text-red-selected">pe foot rests class="text-red-selected">preferable make hindware or class="text-red-selected">parrywair or hindustan or cera or direction of eic" "class="text-red-selected">proclass="text-red-selected">viding and fixing white class="text-red-selected">vitreous china flat back or wall corner tyclass="text-red-selected">pe liclass="text-red-selected">pclass="text-red-selected">ped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes resclass="text-red-selected">pecticlass="text-red-selected">vely with automatic flushing cistern with standard flush class="text-red-selected">piclass="text-red-selected">pe and c.class="text-red-selected">p. brass sclass="text-red-selected">preaders with brass unions and g.i clamclass="text-red-selected">ps comclass="text-red-selected">plete including class="text-red-selected">painting of fittings and brackets cutting and making good the walls and floors whereclass="text-red-selected">ver required one urinal basin with 5 litre white class="text-red-selected">p.class="text-red-selected">v.c. automatic flushing cistern class="text-red-selected">preferable make hindware or class="text-red-selected">parrywair or hindustan or cera or direction of eic" "class="text-red-selected">proclass="text-red-selected">viding and fixing wash basin with c.i. brackets 15 mm c.class="text-red-selected">p. brass class="text-red-selected">pillar taclass="text-red-selected">ps 32 mm c.class="text-red-selected">p. brass waste of standard class="text-red-selected">pattern including class="text-red-selected">painting of fittings and brackets cutting and making good the walls whereclass="text-red-selected">ver require isto white class="text-red-selected">vitreous china wash basin size 630x450 mm with a single 15 mm c.class="text-red-selected">p. brass class="text-red-selected">pillar taclass="text-red-selected">p" "class="text-red-selected">proclass="text-red-selected">viding and fixing class="text-red-selected">p.class="text-red-selected">v.c. waste class="text-red-selected">piclass="text-red-selected">pe for sink or wash basin including class="text-red-selected">p.class="text-red-selected">v.c. waste fittings comclass="text-red-selected">plete. semi rigid class="text-red-selected">piclass="text-red-selected">pe 32 mm dia" class="text-red-selected">proclass="text-red-selected">viding and fixing 600x450 mm beclass="text-red-selected">veled edge mirror of suclass="text-red-selected">perior glass of aclass="text-red-selected">pclass="text-red-selected">proclass="text-red-selected">ved quality comclass="text-red-selected">plete with 6 mm thick hard board ground fixed to wooden cleats with c.class="text-red-selected">p . brass screws and washers comclass="text-red-selected">plete. "class="text-red-selected">proclass="text-red-selected">viding and fixing brass bib cock of aclass="text-red-selected">pclass="text-red-selected">proclass="text-red-selected">ved quality 15 mm nominal bore" "class="text-red-selected">proclass="text-red-selected">viding and fixing brass stoclass="text-red-selected">p cock of aclass="text-red-selected">pclass="text-red-selected">proclass="text-red-selected">ved quality 15 mm nominal bore" class="text-red-selected">proclass="text-red-selected">viding and fixing circular or hexagonal cast iron or m.s. sheet box for ceiling fan clamclass="text-red-selected">p of internal dia 140 mm 73 mm height toclass="text-red-selected">p lid of 1.5 mm thick m.s. sheet with its toclass="text-red-selected">p surface hacked for class="text-red-selected">proclass="text-red-selected">per bonding toclass="text-red-selected">p lid shall be screwed into the cast iron or m.s. sheet box by means of 3.3 mm dia round headed screws one lock at the corners. clamclass="text-red-selected">p shall be made of 12 mm dia m.s. bar bent to shaclass="text-red-selected">pe as class="text-red-selected">per standard drawing. class="text-red-selected">proclass="text-red-selected">viding and fixing isi marked oxidised m. s handles conforming to is 4992 with necessary screws etc. comclass="text-red-selected">plete 125 mm class="text-red-selected">proclass="text-red-selected">viding and fixing bright finished brass hanging tyclass="text-red-selected">pe floor door stoclass="text-red-selected">pclass="text-red-selected">per with necessary screws etc. comclass="text-red-selected">plete. class="text-red-selected">proclass="text-red-selected">viding and fixing is 12817 marked stainless steel butt hinges heaclass="text-red-selected">vy weight with stainless steel screws etc. comclass="text-red-selected">plete 100x60x2.50 mm "class="text-red-selected">proclass="text-red-selected">viding and fixing g.i. class="text-red-selected">piclass="text-red-selected">pes comclass="text-red-selected">plete with g.i. fittings including trenching and refilling etc. for external work a. 15 mm dia nominal bore class="text-red-selected">preferable make tata or jindal or as class="text-red-selected">per direction of eic" "class="text-red-selected">proclass="text-red-selected">viding and fixing g.i. class="text-red-selected">piclass="text-red-selected">pes comclass="text-red-selected">plete with g.i. fittings including trenching and refilling etc. for external work b. 20 mm dia nominal bore class="text-red-selected">preferable make tata or jindal or as class="text-red-selected">per direction of eic" class="text-red-selected">proclass="text-red-selected">viding and fixing g.i. class="text-red-selected">piclass="text-red-selected">pes comclass="text-red-selected">plete with g.i. fittings including trenching and refilling etc. for external work d. 50 mm dia nominal bore class="text-red-selected">preferable make tata or jindal or as class="text-red-selected">per direction of eic "class="text-red-selected">proclass="text-red-selected">viding and fixing on wall face unclass="text-red-selected">plasticised rigid class="text-red-selected">pclass="text-red-selected">vc rain water class="text-red-selected">piclass="text-red-selected">pes conforming to is 13592 tyclass="text-red-selected">pe a including jointing with seal ring conforming to is 5382 leaclass="text-red-selected">ving 10 mm gaclass="text-red-selected">p for thermal exclass="text-red-selected">pansion single socketed class="text-red-selected">piclass="text-red-selected">pes. 110 mm diameter" "class="text-red-selected">proclass="text-red-selected">viding and fixing gun metal gate class="text-red-selected">valclass="text-red-selected">ve with c.i. wheel of aclass="text-red-selected">pclass="text-red-selected">proclass="text-red-selected">ved quality screwed end isto 20 mm nominal bore" "class="text-red-selected">proclass="text-red-selected">viding and fixing gun metal gate class="text-red-selected">valclass="text-red-selected">ve with c.i. wheel of aclass="text-red-selected">pclass="text-red-selected">proclass="text-red-selected">ved quality screwed end isto 50 mm nominal bore" class="text-red-selected">proclass="text-red-selected">viding and class="text-red-selected">placing on terrace at all floor leclass="text-red-selected">vels class="text-red-selected">polyethylene water storage tank is isto 12701 marked with coclass="text-red-selected">ver and suitable locking arrangement and making necessary holes for inlet outlet and oclass="text-red-selected">verflow class="text-red-selected">piclass="text-red-selected">pes but without fittings and the base suclass="text-red-selected">pclass="text-red-selected">port for tank. class="text-red-selected">proclass="text-red-selected">viding and fixing 100 mm sand cast iron grating for gully traclass="text-red-selected">p constructing brick masonry chamber for underground c.i. insclass="text-red-selected">pection chamber and bends with bricks in cement mortar 1 isto 4 1 cement 4 coarse sand c.i. coclass="text-red-selected">ver with frame light duty 455x610 mm internal dimensions total weight of coclass="text-red-selected">ver with frame to be not less than 38 kg weight of coclass="text-red-selected">ver 23 kg and weight of frame 15 kg r.c.c. toclass="text-red-selected">p slab with 1 isto 1.5 isto 3 mix 1 cement 1.5 fine sand isto 3 graded stone aggregate 20 mm nominal size foundation concrete 1 isto 5 isto 10 1 cement 5 fine sand 10 graded stone aggregate 40 mm nominal size inside class="text-red-selected">plastering 12 mm thick with cement mortar 1 isto 3 1 cement isto 3 coarse sand finished smooth with a floating coat of neat cement on walls and bed concrete etc. comclass="text-red-selected">plete as class="text-red-selected">per standard design inside dimensions 600x 850 mm and 45 cm deeclass="text-red-selected">p for class="text-red-selected">piclass="text-red-selected">pe line with three or more inlets isto with common burnt clay f.class="text-red-selected">p.s. non modular bricks of class designation 7.5 "constructing masonry chamber 30x30x50 cm inside in brick work in cement mortar 1 isto 4 1 cement isto 4 coarse sand for stoclass="text-red-selected">p cock with c. i. surface box 100x100 x75 mm inside with hinged coclass="text-red-selected">ver fixed in cement concrete slab 1 isto 2 isto 4 mix 1 cement isto 2 coarse sand isto 4 graded stone aggregate 20 mm nominal size i or c necessary excaclass="text-red-selected">vation foundation concrete 1 isto 5 isto 10 1 cement isto 5 fine sand isto 10 graded stone aggregate 40mm nominal size and inside class="text-red-selected">plastering with cement mortar 1 isto 3 1 cement isto 3 coarse sand 12mm thick finished with a floating coat of neat cement comclass="text-red-selected">plete as class="text-red-selected">per standard design isto with common burnt clay f.class="text-red-selected">p.s. non modular bricks of class designation 7.5" class="text-red-selected">proclass="text-red-selected">viding and laying in class="text-red-selected">position cement concrete of sclass="text-red-selected">pecified grade excluding the cost of centering and shuttering all work uclass="text-red-selected">p to class="text-red-selected">plinth leclass="text-red-selected">vel isto 1 isto 1.5 isto 3 1 cement isto 1 coarse sand zone iii 3 graded stone aggregate 20 mm nominal size making soak class="text-red-selected">pit 2.5 m diameter 3.0 metre deeclass="text-red-selected">p with 45 x 45 cm dry brick honey comb shaft with bricks and s.w. drain class="text-red-selected">piclass="text-red-selected">pe 100 mm diameter 1.8 m long comclass="text-red-selected">plete as class="text-red-selected">per standard design. with common burnt clay f.class="text-red-selected">p.s. non modular bricks of class designation 7.5 "cement concrete flooring 1 isto 2 isto 4 1 cement isto 2 coarse sand isto 4 graded stone aggregate finished with a floating coat of neat cement including cement slurry but excluding the cost of nosing of steclass="text-red-selected">ps etc. comclass="text-red-selected">plete. 40 mm thick with 20 mm nominal size stone aggregate" "class="text-red-selected">proclass="text-red-selected">viding and fixing class="text-red-selected">precoated galclass="text-red-selected">vanised steel sheet roofing accessories 0.50 mm class="text-red-selected">plus 0.05 class="text-red-selected">percent total coated thickness zinccoating 120 grams class="text-red-selected">per sqm as class="text-red-selected">per is 277 in 240 mclass="text-red-selected">pa steel grade 5 to 7 microns eclass="text-red-selected">poxy class="text-red-selected">primer on both side of the sheet and class="text-red-selected">polyester toclass="text-red-selected">p coat 15 to 18 microns using self drilling or self taclass="text-red-selected">pclass="text-red-selected">ping screws comclass="text-red-selected">plete ridges class="text-red-selected">plain 500 to 600mm " "class="text-red-selected">proclass="text-red-selected">viding and fixing class="text-red-selected">precoated galclass="text-red-selected">vanised iron class="text-red-selected">profile sheets size shaclass="text-red-selected">pe and class="text-red-selected">pitch of corrugation as aclass="text-red-selected">pclass="text-red-selected">proclass="text-red-selected">ved by engineer in charge 0.50 mm class="text-red-selected">plus 0.05 class="text-red-selected">percent total coated thickness with zinccoating 120 grams class="text-red-selected">per sqm as class="text-red-selected">per is 277 in 240 mclass="text-red-selected">pa steel grade 5 to 7 microns eclass="text-red-selected">poxy class="text-red-selected">primer on both side of the sheet and class="text-red-selected">polyester toclass="text-red-selected">p coat 15 to 18 microns. sheet should haclass="text-red-selected">ve class="text-red-selected">protecticlass="text-red-selected">ve guard film of 25 microns minimum to aclass="text-red-selected">void scratches during transclass="text-red-selected">portation and should be suclass="text-red-selected">pclass="text-red-selected">plied in single length uclass="text-red-selected">pto 12 metre or as desired by engineerin charge. the sheet shall be fixed using self drilling or self taclass="text-red-selected">pclass="text-red-selected">ping screws of size 5.5 x 55 mm with eclass="text-red-selected">pdm seal comclass="text-red-selected">plete uclass="text-red-selected">pto any class="text-red-selected">pitch in horizontal or class="text-red-selected">vertical or curclass="text-red-selected">ved surfaces excluding the cost of class="text-red-selected">purlins rafters and trusses and including cutting to size and shaclass="text-red-selected">pe whereclass="text-red-selected">ver required." class="text-red-selected">proclass="text-red-selected">viding and fixing of glass class="text-red-selected">panes with class="text-red-selected">putty and glazing cliclass="text-red-selected">ps in steel doors and windows all comclass="text-red-selected">plete with 4mm thick glass class="text-red-selected">panes etc. comclass="text-red-selected">plete. suclass="text-red-selected">pclass="text-red-selected">ply of led tube light fittings .make c.g. or class="text-red-selected">philiclass="text-red-selected">ps fixing of led tube light fittings including suclass="text-red-selected">pclass="text-red-selected">ply of all hardwares as required. led fitting will be suclass="text-red-selected">pclass="text-red-selected">plied by contractor. make c.g. or class="text-red-selected">philiclass="text-red-selected">ps suclass="text-red-selected">pclass="text-red-selected">ply of 48 sweeclass="text-red-selected">p ceiling fan comclass="text-red-selected">plete with down rod.clamclass="text-red-selected">p canoclass="text-red-selected">py etc. fixing of 48 sweeclass="text-red-selected">p ceiling fan comclass="text-red-selected">plete with down rod.clamclass="text-red-selected">p canoclass="text-red-selected">py etc.fan hardwares required for fixing for i.e. nut bolts clamclass="text-red-selected">p screws etc wiil be suclass="text-red-selected">pclass="text-red-selected">plied by contractor. suclass="text-red-selected">pclass="text-red-selected">ply and fixing of steclass="text-red-selected">pclass="text-red-selected">ped tyclass="text-red-selected">pe electronic fan regulator on existing switch board. wiring for light class="text-red-selected">point fan class="text-red-selected">point exhaust fan class="text-red-selected">point with 1.5 sqmm frls class="text-red-selected">pclass="text-red-selected">vc insulated coclass="text-red-selected">pclass="text-red-selected">per conductor single core cable in consield with modular switch modular class="text-red-selected">plate suitable gi box and earthing the class="text-red-selected">point with 1.5 sqmm frls class="text-red-selected">pclass="text-red-selected">vc insulated coclass="text-red-selected">pclass="text-red-selected">per conductor cable as required. suclass="text-red-selected">pclass="text-red-selected">ply of frls class="text-red-selected">pclass="text-red-selected">vc insulated coclass="text-red-selected">pclass="text-red-selected">per conducter single core cable of size 6 sqmm. make haclass="text-red-selected">vells or kei or class="text-red-selected">polycab or national wiring for circuit or submain wiring along with earth wire with the following sizes of frls class="text-red-selected">pclass="text-red-selected">vc insulated coclass="text-red-selected">pclass="text-red-selected">per conductor single core cable in consield or recessed medium class class="text-red-selected">pclass="text-red-selected">vcconduit in concield as required 2 x 6 sqmm class="text-red-selected">plus 1 x 6 sqmm earth wire. all the three colours should be red blue and green suclass="text-red-selected">pclass="text-red-selected">ply and fixing of utility db class="text-red-selected">p or s 20a dclass="text-red-selected">p metal class="text-red-selected">plug and socket distribution board grey make anchor or haclass="text-red-selected">vells suclass="text-red-selected">pclass="text-red-selected">ply and installation of three class="text-red-selected">phase industrial box with 32 amclass="text-red-selected">p 4 class="text-red-selected">pole mcb and 5 class="text-red-selected">pin toclass="text-red-selected">p class="text-red-selected">plug. make neclass="text-red-selected">ptune or reclass="text-red-selected">puted make suclass="text-red-selected">pclass="text-red-selected">ply of frls class="text-red-selected">pclass="text-red-selected">vc insulated coclass="text-red-selected">pclass="text-red-selected">per conducter single core cable of size 10 sqmm. make haclass="text-red-selected">vells or kei or class="text-red-selected">polycab or national wiring for circuit or submain wiring along with earth wire with the following sizes of frls class="text-red-selected">pclass="text-red-selected">vc insulated coclass="text-red-selected">pclass="text-red-selected">per conductor single core cable in surface or recessed medium class class="text-red-selected">pclass="text-red-selected">vcconduit in concield as required 4 x 10 sqmm + 1 x 10 sqmm earth wire.all the ficlass="text-red-selected">ve colours should be red blue yellow black and green class="text-red-selected">preclass="text-red-selected">paration of earth class="text-red-selected">pit with suclass="text-red-selected">pclass="text-red-selected">ply of all materials including 3m long 3.64mm thick class="text-red-selected">perforted gi tube with salt and charcol in alternate layer and brick chamber at the toclass="text-red-selected">p with chequered class="text-red-selected">plate 6mm thick as class="text-red-selected">per is 3043 with latest. suclass="text-red-selected">pclass="text-red-selected">ply and laying 25mm x 5 mm gi striclass="text-red-selected">p at 0.5 meter below ground or wall including connection with electrode with db. suclass="text-red-selected">pclass="text-red-selected">ply of all hardware are in scoclass="text-red-selected">pe of contractor suclass="text-red-selected">pclass="text-red-selected">ply ans fixing of surface mounting class="text-red-selected">vertical tyclass="text-red-selected">pe 415 class="text-red-selected">volts tclass="text-red-selected">pn mcb distribution board of sheet steel dust class="text-red-selected">proctected duly class="text-red-selected">power coated class="text-red-selected">painted inclusiclass="text-red-selected">ve 200 amclass="text-red-selected">p tinned coclass="text-red-selected">pclass="text-red-selected">per bus bar common neutral link earth bar din bar for mounting mcb with class="text-red-selected">proclass="text-red-selected">vision of 100 amclass="text-red-selected">p tclass="text-red-selected">pn mccb as incomer interconnection between incomer mccb and busbar. suclass="text-red-selected">pclass="text-red-selected">ply and fixing of 5 to 32 amclass="text-red-selected">p rating 240 or 415 class="text-red-selected">volt mcb suitable as class="text-red-selected">per load. suclass="text-red-selected">pclass="text-red-selected">ply and fixing of four class="text-red-selected">pole 100 amclass="text-red-selected">p rating 415 class="text-red-selected">volt 16 ka mccb . laying of 1.1kclass="text-red-selected">v grade class="text-red-selected">pclass="text-red-selected">vc al.cable of size 2 or 3 or 3.5 or 4c 2.5 or 6 or 10 or 16 or 25 or 35 sq.mm in underground trench of 760mm deeclass="text-red-selected">px760mm wide in single tier formation including trench excaclass="text-red-selected">vation and back filling with bricks 15brick or m and sand class="text-red-selected">protection route marker. road or concreete or bolder cutting and finishing the road to its original shaclass="text-red-selected">pe are in the scoclass="text-red-selected">pe of the contractor. suclass="text-red-selected">pclass="text-red-selected">ply and fixing of street light on wall including suclass="text-red-selected">pclass="text-red-selected">ply of all necessaryu hardware for fixing of fitting on wall. suclass="text-red-selected">pclass="text-red-selected">ply and fixing of bulk head fitting on wall including suclass="text-red-selected">pclass="text-red-selected">ply of all necessaryu hardware for fixing of fitting on wall. suclass="text-red-selected">pclass="text-red-selected">ply installation and commissioning of exhaust fan of size 300 mm dia. this includes cutting of wall and finishing and suclass="text-red-selected">pclass="text-red-selected">ply of hardware like nut bolts etc. make cromclass="text-red-selected">pton
Tender for sdf-class="text-red-selected">proclass="text-red-selected">viding flooring with tiles on walking track between ch 400m to 1020m on mini tank bund large tank, yellareddy class="text-red-selected">village and mandal,
Tender for renoclass="text-red-selected">vation of all class="text-red-selected">vimanams and other renoclass="text-red-selected">vation works construction of class="text-red-selected">vahana mandaclass="text-red-selected">pam stone, madaclass="text-red-selected">palli, store room, salagoclass="text-red-selected">puram, cut stone flooring around class="text-red-selected">praharam and electrical works in arulmigu janagai narayanaclass="text-red-selected">perumal thirukoil sholaclass="text-red-selected">vandan
Tender for class="text-red-selected">proclass="text-red-selected">viding chequered tiles flooring at old annadanam oclass="text-red-selected">pen to sky area of s class="text-red-selected">v s declass="text-red-selected">vasthama, dwaraka tirumala
Tender for gem bids for class="text-red-selected">vitrified tiles laid with cement based high class="text-red-selected">polymer , class="text-red-selected">vitrified tiles laid with cement mortar , ceramic glazed wall tiles , grouting the joints of flooring tiles , class="text-red-selected">proclass="text-red-selected">viding and fixing aluminium work -for shutters of doors, windows , class="text-red-selected">proclass="text-red-selected">viding and fixing aluminium work- for fixed class="text-red-selected">portion class="text-red-selected">powder coated aluminium , class="text-red-selected">proclass="text-red-selected">viding and fixing 12 mm thick class="text-red-selected">prelaminated class="text-red-selected">particle board , class="text-red-selected">proclass="text-red-selected">viding and fixing glazing - with float glass class="text-red-selected">panes of 4.0 mm thickness , class="text-red-selected">proclass="text-red-selected">viding and laying structural steel work riclass="text-red-selected">veted , 24 mm thick factory made class="text-red-selected">pclass="text-red-selected">vc door shutters , 35mm thick isi marked flush door , class="text-red-selected">proclass="text-red-selected">viding and fixing in class="text-red-selected">position collaclass="text-red-selected">psible steel shutters , class="text-red-selected">proclass="text-red-selected">viding and fixing 18mm thick class="text-red-selected">pre-laminated medium density fibre board , class="text-red-selected">proclass="text-red-selected">viding sal wood work in frames , class="text-red-selected">proclass="text-red-selected">viding and fixing 15mm normal bore g.i. union , class="text-red-selected">proclass="text-red-selected">viding and fixing 20mm normal bore g.i. union , class="text-red-selected">proclass="text-red-selected">viding and fixing white class="text-red-selected">vitreous china class="text-red-selected">pedestal tyclass="text-red-selected">pe water closet , class="text-red-selected">proclass="text-red-selected">viding and fixing water closet squatting class="text-red-selected">pan , class="text-red-selected">proclass="text-red-selected">viding and fixing wash basin with c.i. brackets , class="text-red-selected">proclass="text-red-selected">viding and fixing white class="text-red-selected">vitreous china urinal basin , class="text-red-selected">proclass="text-red-selected">viding and fixing one class="text-red-selected">piece construction white class="text-red-selected">vitreous china squatting class="text-red-selected">plate , class="text-red-selected">proclass="text-red-selected">viding and fixing 600x450mm beclass="text-red-selected">velled edge mirror , class="text-red-selected">proclass="text-red-selected">viding and fixing 600x120x5 mm glass shelf , class="text-red-selected">proclass="text-red-selected">viding and fixing class="text-red-selected">ptmt towel rail comclass="text-red-selected">plete with brackets , class="text-red-selected">proclass="text-red-selected">viding and fixing class="text-red-selected">ptmt liquid soaclass="text-red-selected">p container , class="text-red-selected">proclass="text-red-selected">viding and fixing 15 mm bided or jet sclass="text-red-selected">pray , class="text-red-selected">proclass="text-red-selected">viding and fixing c.class="text-red-selected">p. brass shower rose , class="text-red-selected">proclass="text-red-selected">viding and fixing c.class="text-red-selected">p. brass stoclass="text-red-selected">p cock , class="text-red-selected">proclass="text-red-selected">viding and fixing c.class="text-red-selected">p brass close hole wall mixer taclass="text-red-selected">p , class="text-red-selected">proclass="text-red-selected">viding and fixing 15 mm nominal bore c.class="text-red-selected">p brass angle class="text-red-selected">valclass="text-red-selected">ve , 75 mmwaste and class="text-red-selected">vent class="text-red-selected">piclass="text-red-selected">pes , 100 mm waste and class="text-red-selected">vent class="text-red-selected">piclass="text-red-selected">pes , class="text-red-selected">proclass="text-red-selected">viding and fixing c.class="text-red-selected">p. brass bib cock , demolishing cement concrete , dismantling old class="text-red-selected">plaster or skirting raking out joints , class="text-red-selected">proclass="text-red-selected">viding and laying class="text-red-selected">plain cement concrete 1 is to 3 is to 6 , class="text-red-selected">proclass="text-red-selected">viding and laying in class="text-red-selected">position cement concrete of 1 is to 2 is to 4 , class="text-red-selected">proclass="text-red-selected">viding and laying 1st class brick work with bricks of class designation 75 , half brick masonry with common burnt clay , class="text-red-selected">proclass="text-red-selected">viding and laying 12 mm thick cement class="text-red-selected">plaster 1 is to 6 , class="text-red-selected">proclass="text-red-selected">viding and aclass="text-red-selected">pclass="text-red-selected">plying two coats of white washing with lime on old work , class="text-red-selected">proclass="text-red-selected">viding and aclass="text-red-selected">pclass="text-red-selected">plying white cement based class="text-red-selected">putty , class="text-red-selected">proclass="text-red-selected">viding and aclass="text-red-selected">pclass="text-red-selected">plying one coat of cement class="text-red-selected">primer , class="text-red-selected">proclass="text-red-selected">viding and aclass="text-red-selected">pclass="text-red-selected">plying wall class="text-red-selected">painting , suclass="text-red-selected">pclass="text-red-selected">plying and laying two or more coats class="text-red-selected">painting with synthetic enamel class="text-red-selected">paint , earth work in excaclass="text-red-selected">vation in foundation, , class="text-red-selected">proclass="text-red-selected">viding and fixing centering and shuttering , class="text-red-selected">proclass="text-red-selected">viding and fixing 18 mm thick granite
Tender for class="text-red-selected">proclass="text-red-selected">viding class="text-red-selected">vitrified tile flooring in ground, kitchen renoclass="text-red-selected">vation with cuclass="text-red-selected">pboards, coloring, certain ciclass="text-red-selected">vil and sanitary reclass="text-red-selected">pairs for goclass="text-red-selected">vernment qtr no. mig-4, sr nagar,
Tender for gem bids for carefully remoclass="text-red-selected">ving the class="text-red-selected">veneering wall etc., after class="text-red-selected">proclass="text-red-selected">per documentation bringing them down at a height of 2.50 mtr, stocking for reuse, erecting and remoclass="text-red-selected">ving of suclass="text-red-selected">pclass="text-red-selected">ports at down class="text-red-selected">proclass="text-red-selected">perly etc., comclass="text-red-selected">plete.
carefully remoclass="text-red-selected">val of core filling in between stone masonry class="text-red-selected">veneer wall and stacking the useful materials and conclass="text-red-selected">veyance of debris to a far away from the monument class="text-red-selected">premises, etc.comclass="text-red-selected">plete
excaclass="text-red-selected">vation/scientificclearance of earth declass="text-red-selected">posit to retrieclass="text-red-selected">ve fallen architectural stone elements and to exclass="text-red-selected">pose the buried class="text-red-selected">plinth and original floor & drainage system, including stacking useful stones and disclass="text-red-selected">posing of the excaclass="text-red-selected">vated earth after class="text-red-selected">proclass="text-red-selected">per screening outside the temclass="text-red-selected">ple comclass="text-red-selected">plex, etc.comclass="text-red-selected">plete.
carefully resetting the old aclass="text-red-selected">vailable class="text-red-selected">veneer stone and new stone in original class="text-red-selected">position in lime mortar 1in2 including necessary class="text-red-selected">pointing the stone joints in same mortar with suitable colour oxides, curing, as class="text-red-selected">per the standard sclass="text-red-selected">pecifications and as directed etc. comclass="text-red-selected">plete.
construction of brick work for corefilling and in the edges with country bricks sclass="text-red-selected">pecially made as class="text-red-selected">per requirement in lime mortar 1in2, curing etc., comclass="text-red-selected">plete.
class="text-red-selected">proclass="text-red-selected">viding aclass="text-red-selected">pron and class="text-red-selected">pathwaty using new stone flooring slabs of size 1.20m to 0.90m in length 0.60m to 0.45m in breadth and 3inch to 4inch thick class="text-red-selected">proclass="text-red-selected">perly dressing as class="text-red-selected">per the old aclass="text-red-selected">vailable clues setting in lime mortar 1in1.5 aboclass="text-red-selected">ve the foundation concerete and class="text-red-selected">pointing the stone joints with lime mortar 1in2 curing etc.comclass="text-red-selected">plete.
suclass="text-red-selected">pclass="text-red-selected">plying and making of new class="text-red-selected">veneer stone with good quality of new stones class="text-red-selected">proclass="text-red-selected">perly dressing all sides and architectural designs as class="text-red-selected">per the aclass="text-red-selected">vailable clues in the class="text-red-selected">place of damaged and missing members etc.comclass="text-red-selected">plete.
"disclass="text-red-selected">posal of waste and unserclass="text-red-selected">viceable materials outside temclass="text-red-selected">ple class="text-red-selected">premises, stacking the stone members and leclass="text-red-selected">veling the undulated area, etc.comclass="text-red-selected">plete. 1.disclass="text-red-selected">posal of building rubbish or malba or similar unserclass="text-red-selected">viceable, dismantled or waste materials 100 cum
2. remoclass="text-red-selected">val and stacking of store members 75 cum 3. for leclass="text-red-selected">veling the area-creation of class="text-red-selected">parking sclass="text-red-selected">pace aclass="text-red-selected">pclass="text-red-selected">proximately size of 80m x 6m x 0.50m 240 cum"
Tender for class="text-red-selected">plastering, class="text-red-selected">puttying and class="text-red-selected">painting of building, new electrification work, new flooring, new tin shed oclass="text-red-selected">ver generator, stone work on stairs, reclass="text-red-selected">pair of windows and doors, reclass="text-red-selected">pair of roof of building, aluminium section mosquito net balance, maintanance and electrification work at class="text-red-selected">vanya radio sha. utkrisht uchchtar madhyamik class="text-red-selected">vidyalay chanshekhar azad nagar
