Indian Tenders Tender information of India
Global Tenders International Tender information
Projects Project information of India
Tender Awarded Tender awarded information
Sub-Contractor Vendor information of India
Pay Online
Register now
Login
Contact Info All India : 9276083333 / 9274315555 South India : 9274315555

Filters

List of pvc conduits Tenders

List of latest pvc conduits Tenders in Indian Tenders. Click on any pvc conduits Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for pvc conduits Tenders.

All-Tenders (33)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government And Public Sector

TRN :35725984 | 10 Nov, 2025

Tender Value : 4.94 Lacs

Thrissur - Kerala

Tender for gem bids for supplying and fixing of vertical type, mcb distribution board, supplying and fixing 5 a to 32 a rating, mcb single pole, supplying and fixing 5 a to 32 a rating, mcb tripple pole, supplying and fixing 4 pole 63 amps isolator, supplying andfixing of pvc conduit 20 mm, supplying and fixing of pvcconduit 25 mm, supplying and drawing of frls coppercable 3x1.5 sq. mm, supplying and drawing of frls coppercable 3x2.5 sq. mm, supplying and drawing of frls coppercable 3x4 sq. mm, supplying and drawing of frls coppercable 3x 6 sq. mm, supplying and making end terminationwith brass compression gland 3 .5 x 25 sq. mm, supplyingand making end termination with brass compression gland3.5 x 35 sq. mm, supplying and making end terminationwith brass compression gland 3.5 x 50 sq. mm, providingand fixing 6 swg dia g.l. wire, wiring for light point, fanpoint, exhaust fan point, call bell point with 1.5 sq.mmcopper conductor cable group c, supplying and fixingmodular switch socket 5, 6 a switch, supplying and fixingmodular switch socket 3 pin 5, 6 a socket outlet, supplyingand fixing modular switch, socket 15, 16 a switch, supplying and fixing modular switch socket 6 pin 15, 16 asocket outlet, supplying and fixing modules, gl box 3module 100mmx75mm, supplying and making endtermination with brass compression gland 2 x 1.5 sq. mm, dismantling of pvc insulated and pvc sheathed xlpe powercable up to 6 sq. mm, dismantling pvc insulated and pvcsheathed xlpe power cable above 6 sqmm up to 35 sq. mm, dismantling of pvc insulated and pvc sheathed xlpepower cable above 35 sq. mm and up to 95 sq. mm, relaying and refixing of pvc insulated and pvc sheathedxlpe power cable up to 6 sq. mm, relaying and refixing ofpvc insulated and pvc sheathed xlpe power cable above 6sqmm up to 35 sq. mm, relaying and refixing of pvc /bid number: gem/2025/b/6827905* /dated: 27-10-2025 & & / bid document1 / 47 insulated and pvc sheathed xlpe power cable above 35 sq.mm and up to 95 sq. mm, supply and fixing of pedestalmounting type kseb energy meter board, supplying anddrawing 25 sqmm abc aluminium weather proof cable, dismantling 125 amps capacity 4 pole on load change overswitch with ms enclosure, dismantling the existing afdpanel repeater panels, dismantling the existing old125amps capacity lt panel, dismantling the existing scmeter panel, dismantling the existing tpn mcb db, dismantling smoke detectors or mcp or hooter ri etc withaccessories, dismantling the existing life expired unservceable ac stabilser panel, reinstalling the existing 125a, 4 pole on load change over switch, reinstalling theexisting afd panel, reinstalling the existing kseb serviceconnection meter panel, reinstalling the existing tpn mcbdb, dismantling electrical wiring in metal pvc conduits forac units, wirings, dismantling electrical wiring in metal pvcconduits for ei light power plugs, relaying existingelectrical wiring in metal pvc conduits, transportation ofthe dismantled electrical installation accessories within15km distance, rearranging isolating the existingterminations, supply and fixing 63 amps capacity 4 wayconnector, supply installation, testing and commissioningof pre-wired, bulk head light fitting, supplying and fixing of63 amps capacity 4 pole on load change over switch, supply and fixing 2 inch dia rigid pvc pipe, supply andfixing suitable pvc coated gi stay wire, providing framework with 40 mm x 40 mm x 5 mm ms angle iron, providingframe work with 25 x 25 x 3 mm thick ms angle iron, providing frame work with 40 mm x 5 mm ms flat iron, providing frame work with 1 mm thick coated trafford gisheet, supply and fixing 63 amps 4 pole onload changeover switch

Central Government/Public Sector

TRN :35726801 | 14 Nov, 2025

Tender Value : 94.66 Lacs

Madurai - Tamil Nadu

Tender for gem bids for si of vrf outdoor units, sitc of vrf idu, supply ofcordless remote controller with receiver for 4-waycassette., sitc of lcd touch screen, refnet joints, lifting and shifting charges of odu from gf to sf, liftingand shifting charges of odu from gf to tf, lifting andshifting charges of idu from gf to tf, pressure testing andpressure holding nitrigen, testing and commissioning ofvrf systems, refrigerant pipe for vrf system, communication cable, drain piping with 9 mm thicknitrile rubber insulation., supply and charging of r-410arefrigerant, protective glass wool tape above the copperpipes, 2.5 inch pvc pipe for exposed coppe pipes area, sitc of underdeck insulation of ceiling, supply and fixing ofms angle iron, channel, chequered plates with 2 coats ofprimer, 2 coats of enamel paint and complete in all respectetc., perforated cable tray, ventilation fans, giround duct 22swg, powder coated extruded aluminium of18 g disc valve, supply and installation of insulated flexibleducting, complete with connecting rings, aluminium foiltape, duct supports etc., dx system biq, supply, installionand testing of interconnecting copper refrigerant pipe, electrical power cable from power mcb to odu, controlcable between idu to odu with conduits and necessaryfittings and accessories., insulated pvc drain piping forindoor unit with 9 mm thick nitrile rubber insulation., comprehensive amc charges, buyback offer for acs

Central Government/Public Sector

TRN :35710371 | 06 Nov, 2025

Tender Value : 0

Anantnag - Jammu And Kashmir

Tender for gem bids for plastics bib taps pillar taps angle valves and stop valves asper is 9763:2000 latest q3, mcb - miniature circuit -breakers for a.c. operation as per is / iec 60898 part 1q2, hydraulically regulated door closers q3, pvc insulated unsheathed cable with flexible conductor asper is 694 q2, pvc flat cable, aluminium conductor withpvc insulation and sheath as per is 694 q3, switch fuseunit q3, tower bolts ferrous metals as per is 204 q3, curtain pipe, sider and mounting bracket q4, led battenq2, metal alloy casting water tap with aerator v2 q3, cast copper alloy screw down bib taps and stop valves forwater services as per is 781 q3, brick q3, towel rail /ring for bathroom q3, toilet seat - indian style squattingpan q3, european pattern toilet seat vitreous china q3, sinks / wash basins - vitreous china as per is 2556 part4 q3, propeller type ac ventilating fans - exhaust fansv2 as per is 2312 q2, table fan / wall mount fan /ceiling mount fan as per is 555 q3, piano type nonmodular electrical switch socket combination as per is 3854and is 1293 q3, waste pipe q3, piano type modulardomestic fan regulator as per is 11037 q3, pvc channelq3, piano type non modular domestic electrical sockets -is 1293 q3, non - modular piano type domestic electricalswitches as per is 3854 q3, steel pipes for water andsewage as per is 3589 q3, waste fittings for washbasinand sinks as per is 2963 q3, rigid plain conduits ofinsulating materials as per is 9537 part 3 q3, connection pipe with nuts v2 q3, wood screws q3

Central Government/Public Sector

TRN :35710845 | 04 Nov, 2025

Tender Value : 18.00 Lacs

Panchkula - Haryana

Tender for gem bids for repair of ms frame, removing and fixing of puffpanel, puff panel, removing of grid ceiling, providing and fixing of grid ceiling, providing andlaying of pcc, providing and laying of tiles, removing and refixing of aluminium doors, aluminium doors, providing and fixing of aluminiumdoors and windows shutter, partion removal, wiring of 6 amp light points, wiring of 16 amp lightpoints, wiring of fan points, wiring of ac points, pvc conduits 25mm, pvc conduits 32mm, flexiblepipe 25mm, flexible pipe 32mm, distribution board, ups distribution box, distribution box, ac unit, wall fans, wiring to mcb, electrical accessories, lights, exhaust fans, tube, red oxide paint, emulsion paint, apex paint, rust treatment

Central Government/Public Sector

TRN :35713173 | 15 Nov, 2025

Tender Value : 0

Kozhikode - Kerala

Tender for gem bids for l3 stackable routing switch with 100ge fiber uplink ports, 24 port l2 10g access and switch, 8 port gigabit networkswitch with sfp ports, 10g duplex sfp duplex transceiver, 17u network floor mount rack, 12u network wallmountrack, 6 u network wallmount rack, 24 port loaded patchpanel, closed cable manager, 1 mtr cat6 patch cord, 3mtr cat6 patch cord, smb, faceplate single, cat6 i osocket, rack cooling fan with power cord, rack hardwarecagenut pack of 10, 48 port duplex lc loaded liu, 12 portduplex lc loaded liu, 6 port duplex lc loaded liu, 1mtrlc lc duplex patch cord, 3 mtr lc lc duplex patch cord, 6socket pdu, 1kva ups, supply of cat6 cable, laying ofcat6 cable, supply of 48 core optical fiber cable, layingof 48 core optical fiber cable, supply of 12 core opticalfiber cable, laying of 12 core optical fiber cable, supplyof 6 core optical fiber cable, laying of 6 core optical fibercable, ofc splicing charges, 32mm hdpe pipe with allaccessories, channelling and conduiting of hdpe pipe, supply of 20mm pvc conduits with accessories ivory, supply of 25mm pvc conduits with accessories ivory, digging laying of hdpe water pipe in hard soil tar roadconcrete, 4 meter gi steel supporting pole for cableequipment mounting, laying of pvc conduits, supply 1run of 2.5 sqmm electrical cable, supply 1 run of 1.5sqmm electrical cable, laying of copper cable, cast ironcable route marker with angle iron leg 2ft with painting isiapproved, supply and laying of stay wire for overheadcable laying, fixing of1 nos of 16a socket controlled by 1switch with surface mounted box modular, supply of1 nosof 16a socket controlled by 1 switch with surface mountedbox modular, microfiber 6 inch hook and loop cord ties forcable management 50 nos, installation testing andcommissioning charges

Central Government/Public Sector

TRN :35708276 | 04 Nov, 2025

Tender Value : 23.93 Crore

New Delhi - Delhi

Tender for gem bids for execution, wooden modular l shape reception counter with granitetop finish with all electrical point power and normal andreading light system customized cctv control wall panelunit alongwith chester unit medium back revolvingreception chairs wooden storage chester drawers blockout board including photo shoot and printing of all photos high quality acrylic led light board high quality executivel shape tables with glass top or integrated side chester andcomputer table or mobile pedestal drawer executive officechair high back modular visitor chair customisedergonomic seating arrangements three seater with basicframework customised ergonomic seating arrangementssingle seater with basic framework customised ergonomicseating arrangements two seater with basic framework side table center table customised staff work stationwith all electrical point medium back revolving staffchairs high quality executive l shape principal directortable wooden framed motivational display paintings modular show case with both side full height display showcase cabinet designer lcd wall panel unit cabinet withstorage area drawer cabinet customised modular diningtable 11 seater for duty officers room small modulardining table set 05 seaters with dining chairs table lampas per sample wooden modular almirah indian navy flagand national flag with stainless steel flag post and base asper national flag code 4k ultra hd projector withaccessories classroom study chair with foldable writingtable zebra window blind with all hardware woodenmodular l shape reception counter single wooden bedwith matress for duty staff modular dining table 08 seaterfor duty officers room wooden partition made over theframe grid wooden modular storage cabinet wall mountedor floor based as per the required size modular pantry with bid number gem2025b6727844 dated 24-10-2025 bid document1 89 1 1 storage and display cabinet, wooden washroom counterwith modular racks or slider racks, waterproof or termiteproof or fire retardant pvc paneling, films on toughenedglass or glass partition or windows glass, toughened glasspartition, wallpapers with 3d model and highlighterpatterns, motivational display murals, wooden boxpaneling waterproof or termite proof or fire retardantmaterial in various colours or shades, wooden cap standwith four hooks, wooden cap stand with fifteen 15 hooks, successor boards, am i dressed correctly mirror withframe, customised modular designer conference tables, executive conference chair medium back, executivepresident or chairperson chair high back, projector displayor conference led screen wall panel unit, projector displayor projector screen wall panel unit cabinet, customizedsmart wooden podium, wooden podium, undergroundwiring for all conference tables, public announcementsystem mixer amplifier, pa vhf microphones, pa vhfwireless microphones, 2 way pa ceiling speaker, speakerand mike wires, smart display unit size 75 inch, hdmicable for connection of display with projector or pc 45 mtr, block out board, motivational and informative displayboards or paintings or pictures with wooden carving frame, stainless steel cross flags of indian navy and national flagas per national flag code, professional large formatdisplay for main conference hall 247 cm or 97 inch, smartled display size 55 inch, ip pbx main control unit digitalhybrid ip pbx, digital telephone instruments with cli, telephone cables 4 pair or armoured, isi marked rigid pvcconduits and accessories, telephone junction boxes 10 or20 pair, krone type modules and accessories, installationand testing and commissioning, ofc 12 core, provisioning of interconnectivity with existing exchange byncn date centre, 19 and 24 u rack, lan cable cat 6 utp, information outlets input output ports with faceplate andback box, faceplate dobule port, back side gang box, patch cords 1m and 2m, cable trays, laying and fixing forall networking cables to each office workstation of all floorsof both towers, dth cabling from central distribution pointof terrace to each television point i, 32 channnelnetwork video recorder, 16 ch network videorecorder, bullet camera colour 4 mp, 4 mp domecamera, 32 ch poe, cable utp cat 06, switcher orspliter, converters, hard disk 8tb, lan connector, installation for cctv cameras and entire hardwareinfrastructure, supply of and instalation of hardware orfixture or clamps or joints or gi conduits or conectors andgang boxes etc, rack 8u, hdmi cable 150 mtrs, leddisplay screen 50 inch, computer mouse, usbconverter, electrical points with switch and sockets, power back up system, biometric security access system, public announcement system with all speakers wiring andinstallation, centralised vrv air conditioning system, supply and installation of two bay storage compactorsystem 1, supply and installation of two bay storagecompactor system 2, supply and installation of two baystorage compactor system 3, supply and installation oftwo bay storage compactor system 4, supply andinstallation of two bay storage compactor system 5, supply and installation of three bay storage compactorsystem 6, designing and fabrication and fixing of nametallies with frame and base plate of acp aluminiumcomposite panel sheet 8, indication boards and signage forlift lobbies, digital blockout boards for directorates and //bid details2 / 89 departments with all electrical connections and hangingchains, supplying and installation of smart led tv 32 inchwith all fixtures and wall mounted stands, supplying andinstallation of smart led tv 42 inch with all fixtures and wallmounted stands, supplying and installation of smart ledtv 55 inch with all fixtures and wall mounted stands, supply of microwave of 23 ltr, supply and installation ofwater dispenser, supply and installation of refrigerator 180liters, supply of cooktop induction, supply and installationof commercial refrigerator 360 litres, supply andinstallation of air curtain size 1800 mm 6 feet, supply andinstallation of water cooler 80 or 100, supply andinstallation of commercial ro water purifier, supply ofplants with fiber planters, supply of small size plants forlandscaping assorted varities of palm or deafen or bonsaietc, designing supply and installation of scale models ofnaval war platforms artefacts of naval ships of differentclasses submarines and aircrafts, additional fireextinguisher 5 kg, fire extinguisher stand with bucket andbalti mount, fire ball with brackets

State Government

TRN :35763340 | 10 Nov, 2025

Tender Value : 17.65 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at govt. sss bilona kalan -demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster (ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) internal plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick. plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .6a to 32a rating. 50 a to 63a rating providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 6.0 sq. mm 4 core providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating p & f isi marked (is:3854) 6 amp. flush type non modular switch with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .

State Government

TRN :35763827 | 10 Nov, 2025

Tender Value : 2.94 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at gups narayanpura - demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). random rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in :cement mortar 1:6 ( 1-cement : 6-sand).cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." stone kharanja : random rubble dry stone kharanja under floor. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work p&f rigid pvc pipe (is:4985 mark) class ii(4 kg. /cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant 110mm dia wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr

Central Government And Public Sector

TRN :35764433 | 21 Nov, 2025

Tender Value : 10.35 Lacs

Thrissur - Kerala

Tender for gem bids for supply, installation, testing, commissioning of free standing, outdoor cubicle type microprocessorbased amf panel 30 kva, sitc of free standing, outdoorcubicle type microprocessor based amf panel for 15 kva, supplying, laying and fixing of al power cable in pipe, supplying, laying and fixing of al power cable on surface ofwall, supplying, laying and fixing of al power cable inmasonry open duct, supplying and making end terminationwith brass compression gland, supplying, laying and fixingof 8 c 1.5sq.mm pvc flexible cable, supplying and laying of2 x 6 sq mm pvc insulated, supplying, laying of 16 sqmmsize frls pvc insulated copper conductor, supplying andlaying of industrial telephone cables, supplying and layingof dwc hdpe pipe, supply and fixing the steel wirereinforced flexible upvc conduit, sf 40 mm dia gi pipe, supplying and fixing of medium class pvc conduit, supplying and fixing of spn db, replacement of 12v, stopsolenoid, llop sensor, hct hwt sensor, sensor float, start stop relay, 12 v oen pla relay, dismantling of theexisting dg control panel, rerouting of the existing cable

Central Government And Public Sector

TRN :35765402 | 10 Nov, 2025

Tender Value : 2.53 Lacs

Patna - Bihar

Tender for gem bids for ac wall fan, led lamp fittings, pedestal fan, exhaust fan, copper conductor cable, ceiling rose, led tube fitting, ledbulb, brass holder, pvc conduit, copper pipe 5 by 8 inch, copper pipe 1 by 4 inch, supplying and drawing wire, drainpipe, supplying and charging r32 gas, servicing andrepairing, shifting with installation, dismantling window ac, transportation charges, frls pvc insulated copperconductor, closing of existing opening, replacement of oldand faulty ceiling fans, providing and fixing ups, lead acidbattery, providing and fixing plyboard

1
2
3
4

Related Searched Keywords : pvc conduits

Get pvc conduits Tender Alert...

Related Searched Keywords : pvc conduits

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us

Copyright ©2018 - Thetenders.com.