Filters

List of ring-main-system Tenders

List of latest ring-main-system Tenders in Indian Tenders. Click on any ring-main-system Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for ring-main-system Tenders.

All-Tenders (66)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :49059565 | 23 May, 2025

Tender Value : 0

Kolkata - West Bengal

Tender for supply, delivery & installation of submersible pumping machinery and other electrical / mechanical equipment etc. including allied works for raghubati water supply scheme, t.w. no. iii & iv, block: goghat-i, district - hooghly under electrical division, phe dte.- 1 part-a supply and delivery at site submersible pumping machinery directly coupled with wet winding type submersible motor having the following specification pump.duty condition :36 cu.mtrhead :58 mtr.motor : submersible type 3 ph. 50 hz. 400v + 10%, mos:- star deltaimpeller : gm/ ss/ cromesteelmotor winding : wet type.pump outlet - 65/75/100 mm.(test certificate, warranty certificate along with characteristic curve should be submitted at the time of delivery.) 2 supply and delivery at site the following:-upvc 80 mm dia column pipewith both side square threaded (8 tpi)with one socket and o ring biax technology with wiring lock system non corrosive,high tensile having iso 9001 standard. 3 i)3 mtr. long. 4 ii) 1.5 mtr. long 5 iii) 80 mm dia top & bottom adaptor 6 100 mm x 80 mm dia gi reducer 7 supply and delivery at site heavy type suitable dia m.s. suspension clamp for above column pipe along with nuts, bolts and washers etc. 8 supply and delivery at site 80 mm. dia cidf sluice valve- 1 no., 80mm non return valve (swing type - 1 no.) pn - 1.0,80mm ms heavy flange - 1 no., cidf bend 90o - 1 no., cidf / ms (heavy) short piece as required length, 80mm cidf tee - 1 no., reducer, nut bolt and other ci / ms specials etc. as required as per i.s. specification and other required materials for the job i.e. for making complete construction of delivery and wash out lineas per relavant i.s. (test certificate for valve should be submitted at the time of delivery). 9 supply and delivery at site split type m.s. fabricated suitable tubewell cover for the tubewell housing with necessary clamping arrangement including holes for column pipe, air pipe and cable entry etc. 10 supply and delivery at site depth gauge (make : h. guru) 102 mm dia. with steel airbreak pipe required length with all other fittings and accessories for the work including supplying on the good quality hand pump of approve make 11 supply and delivery at site pressure gauge 102 mm. dia and 7 kg. /cm2 range, brass cocks and fitting complete(h.guru) 12 supply and delivery at site 4 sq. mm. 3 core copper 1.1 kv grade pvc insulated water proof flat submersible cable. 13 making safety device for above pump by supplying 3 nos. suitable size ms clamp/ ms cage and 1 dia nylon rope of required length including supplying nuts, bolts, and other materials as per direction. 14 supply & delivery of double flanged three phase 50 hz quarter turn electrical actuator [gear case lubrication : sp68 is:13095, torch switches: 2 x 1 no / 1 nc changeover contact, positional limit switches: 2 x 1 no / 1 nc changeover contacts] operated flange type butterfly valve (pn - 1.0) 80 mm. dia with mechanical position indicator, ci body & disk - is: 210 gr. fg 260, shaft of stainless steel aisi 410 as per bs 5155 ip - 68 / s-2,(test certificate should be submitted at the time of delivery) 15 supply & delivery of 415 v mcc cum pdb. with minimum 2mm thickness and degree of protection ip - 54, conforming to is-8623 withsuitable bus bar, digital voltmeter ammeter, contactor, delay timer, mcb, valve actuator starter etc. with plc logic & ups as detailed in annexure - i7.5 -12.5 hp with sds (star delta starter)panel make : digitek / rnr industries /pce projects / opg power system / ecs.[tc / gc to be submitted along with panel after approval of detail power and control circuit drawing by eic]. 16 supply & delivery of 35 sq. mm. 3 1/2 core pvc insulatedal. armoured cable (1.1 kv grade), is 1554 (part - i) / is 7098 (part-i) make : incab /gloster / nicco / polycab / crystal. 17 supply & delivery of 100 amp. 440 v, 50 hz. tpn main switch with rewireable type fuse link 18 supply & delivery of 100 amp. industrial copper busbar 19 supply & delivery of 4 pole 100 amp changeover unit 20 supply & delivery of 100 amp 4 pole mccb with adjustable overload and adjacent short circuit protection including enclosures. 21 supply & delivery at site of 25 kva, 3 phase oil cooled type servo motor operated wound line voltage corrector conforming to is-9815 [pt-i] 1994 suitable for unbalanced input voltage.input voltage: 3 phase main supply phase to phase 200v-500v 3 servo motor in 3 phase with all protection by mcb (make- abb / siemens/ l&t)output voltage: 3 phase balanced output phase to phase 415v + 1% (test certificate & warranty certificate should be submitted at the time of delivery) 22 supply and delivery of automatic plunger type chlorinator for feeding accurately automatic controlled dosage of chlorine solution into the water by connecting metering pump with flow rate of water 0-100 ltr/hr. with maximum pressure of 10 kg./cm2 suitable dosing pump and other necessary accessories on the delivery pipe line as required. the pump shall be coupled with 1/2 hp motor having 3 phase power and 1440 rpm (+4%).(test certificate will be submitted at the time of delivery) 23 part-binstallation of pumping machinery with valves, pipe & pipe specials, sort piece, presurre gauge including hoisting of column pipe making all electrical and water line interconnection complete as per direction including supply of necessary materials as required for the work. 24 making of tubewell foundation (size- 3x 3x 3.5 approx) as per site situation including supply of necessary materials as bricks, sand, cement, stone chips etc. with plastering & neat cement finishing to complete as per direction. 25 installtion of panel & actuator operated ci butterfly valvewith supply of 12 core 2.5 sq. mm. copper control cable, compensating ms flange, nuts, bolts gasket and other fixing materials as required to complete the job including necessary making of brick pillar as per site situation with supply of necessary materials like bricks, sand, cement, stone chips etc. with plastering & neat cement finishing in all respect including successfull operation along with testing of the whole installation as per entire satisfaction of eic. 26 installation with testing and commissioning of the voltage stabilizer with necessary foundation along with necessary accessories in the suitable position and drawing cable with ms shaddle, making all electrical connection including socketing, crimping to complete the work as per direction. 27 installation of above supplied chlorinator pump set and drawing of power line by supplying of necessary wire and continuous earthing connected to auto/ manual panel. this includes the cost of making necessary brick foundation base with neat cement finish by supplying all requered materials and testing entire set as per direction of eic 28 making internal electrification with 16amp main switch/mcb (make: havells/ any approved) by 1.5 sq.mm frlsh grade copper pvc insulated single core multistrand wire (make: havells/ mescab/ finolex/ any approved) in pvc casing of pump house consisting of 2 nos. bracket point, 1 no. tube light point, 1 no. bulk head point and 1 no. five pin 5 amp. socket point, 1 no. ceiling fan point with controlling switches including supply of 2 nos. bracket with 12w led lamp, 1 no. 20 watt led tube light set, 1 no. outdoor type bulk head with 9w led lamp and drawing of necessary earthing (1.0 sq.mm) material all complete as per direction eic. (led light make: philips/ havells/ any approved) 29 supply and fitting fixing of 45 watt. x 2 nos. led light set [make - philips, model: brp031 led45 cw slr gr psu] with 2 nos 40 mm dia 1.5 mtr. long g.i pipe bracket fixed on the roof of the pump house with properly grout including making power connection by 2 x 1.5 sq. mm copper fr grade flexible wire through pvc casing/conduit with drawing earth conductor (1.0 sq mm copper flexible wire), fitting fixing of 15 amp switch on board with all complete as per direction of eic. 30 earthing confirming to is: 3043 by 50mm dia gi pipe 3.64mm thick x 3.04m long and 1 x 4 swggi (hot dip) wire (4 mts. long), 13mm dia x 80mm long gi bolts, double nuts, double washers including supply & fixing of 15mm dia gi pipe protection (1 mtr long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 mtrs below the ground level and restoring surface duly rammed as below. a) for soft soilby tata - medium gi pipe 31 drawing earth by m.s. flat strip (20mm x 3mm) fromearth bus / electrode to above differentcomponents as per i.e. rules and as per direction of eic. 32 supply & fitting fixing of 100 amp. kit kat (3 nos.)(make : havells) with required size wooden board mounted on wall. 33 supply, delivery & fitting fixing of 48 sweep 230 volt, 50 hz, ac ceiling fan (make : havells/ cg/ approved make) including fitting fixing on ceiling and making electrical connection complete. 34 supply & delivery at site 2 nos. plastic chair & 1 no. plastic table (make: cello / supreme / nilkamal) 35 trial operation and guarding of whole installationas per departmental requirement and guideline 1 no. operator @ 465/- per day with 8.33% bonus. [as per existing departmental terms & conditions] 36 for t.w. no. iii 37 for t.w. no. iv 38 add: 18% gst 39 add: 1% cess

State Government

TRN :49059624 | 23 May, 2025

Tender Value : 0

Kolkata - West Bengal

Tender for supply, delivery & installation of submersible pumping machinery and other electrical / mechanical equipment etc. including allied works for jagatpur water supply scheme, t.w. no. vi, block: khanakul-ii, district - hooghly under electrical division, phe dte.- 1 part-a supply and delivery at site submersible pumping machinery directly coupled with wet winding type submersible motor having the following specification pump.duty condition :36 cu.mtrhead :58 mtr.motor : submersible type 3 ph. 50 hz. 400v + 10%, mos:- star deltaimpeller : gm/ ss/ cromesteelmotor winding : wet type.pump outlet - 65/75/100 mm.(test certificate, warranty certificate along with characteristic curve should be submitted at the time of delivery.) 2 supply and delivery at site the following:-upvc 80 mm dia column pipewith both side square threaded (8 tpi)with one socket and o ring biax technology with wiring lock system non corrosive,high tensile having iso 9001 standard. 3 i)3 mtr. long. 4 ii) 1.5 mtr. long 5 iii) 80 mm dia top & bottom adaptor 6 100 mm x 80 mm dia gi reducer 7 supply and delivery at site heavy type suitable dia m.s. suspension clamp for above column pipe along with nuts, bolts and washers etc. 8 supply and delivery at site 80 mm. dia cidf sluice valve- 1 no., 80mm non return valve (swing type - 1 no.) pn - 1.0,80mm ms heavy flange - 1 no., cidf bend 90o - 1 no., cidf / ms (heavy) short piece as required length, 80mm cidf tee - 1 no., reducer, nut bolt and other ci / ms specials etc. as required as per i.s. specification and other required materials for the job i.e. for making complete construction of delivery and wash out lineas per relavant i.s. (test certificate for valve should be submitted at the time of delivery). 9 supply and delivery at site split type m.s. fabricated suitable tubewell cover for the tubewell housing with necessary clamping arrangement including holes for column pipe, air pipe and cable entry etc. 10 supply and delivery at site depth gauge (make : h. guru) 102 mm dia. with steel airbreak pipe required length with all other fittings and accessories for the work including supplying on the good quality hand pump of approve make 11 supply and delivery at site pressure gauge 102 mm. dia and 7 kg. /cm2 range, brass cocks and fitting complete(h.guru) 12 supply and delivery at site 4 sq. mm. 3 core copper 1.1 kv grade pvc insulated water proof flat submersible cable. 13 making safety device for above pump by supplying 3 nos. suitable size ms clamp/ ms cage and 1 dia nylon rope of required length including supplying nuts, bolts, and other materials as per direction. 14 supply & delivery of double flanged three phase 50 hz quarter turn electrical actuator [gear case lubrication : sp68 is:13095, torch switches: 2 x 1 no / 1 nc changeover contact, positional limit switches: 2 x 1 no / 1 nc changeover contacts] operated flange type butterfly valve (pn - 1.0) 80 mm. dia with mechanical position indicator, ci body & disk - is: 210 gr. fg 260, shaft of stainless steel aisi 410 as per bs 5155 ip - 68 / s-2,(test certificate should be submitted at the time of delivery) 15 supply & delivery of 415 v mcc cum pdb. with minimum 2mm thickness and degree of protection ip - 54, conforming to is-8623 withsuitable bus bar, digital voltmeter ammeter, contactor, delay timer, mcb, valve actuator starter etc. with plc logic & ups as detailed in annexure - i7.5 -12.5 hp with sds (star delta starter)panel make : digitek / rnr industries /pce projects / opg power system / ecs.[tc / gc to be submitted along with panel after approval of detail power and control circuit drawing by eic]. 16 supply & delivery of 35 sq. mm. 3 1/2 core pvc insulatedal. armoured cable (1.1 kv grade), is 1554 (part - i) / is 7098 (part-i) make : incab /gloster / nicco / polycab / crystal. 17 supply & delivery of 100 amp. 440 v, 50 hz. tpn main switch with rewireable type fuse link 18 supply & delivery of 100 amp. industrial copper busbar 19 supply & delivery of 4 pole 100 amp changeover unit 20 supply & delivery of 100 amp 4 pole mccb with adjustable overload and adjacent short circuit protection including enclosures. 21 supply & delivery at site of 25 kva, 3 phase oil cooled type servo motor operated wound line voltage corrector conforming to is-9815 [pt-i] 1994 suitable for unbalanced input voltage.input voltage: 3 phase main supply phase to phase 200v-500v 3 servo motor in 3 phase with all protection by mcb (make- abb / siemens/ l&t)output voltage: 3 phase balanced output phase to phase 415v + 1% (test certificate & warranty certificate should be submitted at the time of delivery) 22 supply and delivery of automatic plunger type chlorinator for feeding accurately automatic controlled dosage of chlorine solution into the water by connecting metering pump with flow rate of water 0-100 ltr/hr. with maximum pressure of 10 kg./cm2 suitable dosing pump and other necessary accessories on the delivery pipe line as required. the pump shall be coupled with 1/2 hp motor having 3 phase power and 1440 rpm (+4%).(test certificate will be submitted at the time of delivery) 23 part-binstallation of pumping machinery with valves, pipe & pipe specials, sort piece, presurre gauge including hoisting of column pipe making all electrical and water line interconnection complete as per direction including supply of necessary materials as required for the work. 24 making of tubewell foundation (size- 3x 3x 3.5 approx) as per site situation including supply of necessary materials as bricks, sand, cement, stone chips etc. with plastering & neat cement finishing to complete as per direction. 25 installtion of panel & actuator operated ci butterfly valvewith supply of 12 core 2.5 sq. mm. copper control cable, compensating ms flange, nuts, bolts gasket and other fixing materials as required to complete the job including necessary making of brick pillar as per site situation with supply of necessary materials like bricks, sand, cement, stone chips etc. with plastering & neat cement finishing in all respect including successfull operation along with testing of the whole installation as per entire satisfaction of eic. 26 installation with testing and commissioning of the voltage stabilizer with necessary foundation along with necessary accessories in the suitable position and drawing cable with ms shaddle, making all electrical connection including socketing, crimping to complete the work as per direction. 27 installation of above supplied chlorinator pump set and drawing of power line by supplying of necessary wire and continuous earthing connected to auto/ manual panel. this includes the cost of making necessary brick foundation base with neat cement finish by supplying all requered materials and testing entire set as per direction of eic 28 making internal electrification with 16amp main switch/mcb (make: havells/ any approved) by 1.5 sq.mm frlsh grade copper pvc insulated single core multistrand wire (make: havells/ mescab/ finolex/ any approved) in pvc casing of pump house consisting of 2 nos. bracket point, 1 no. tube light point, 1 no. bulk head point and 1 no. five pin 5 amp. socket point, 1 no. ceiling fan point with controlling switches including supply of 2 nos. bracket with 12w led lamp, 1 no. 20 watt led tube light set, 1 no. outdoor type bulk head with 9w led lamp and drawing of necessary earthing (1.0 sq.mm) material all complete as per direction eic. (led light make: philips/ havells/ any approved) 29 supply and fitting fixing of 45 watt. x 2 nos. led light set [make - philips, model: brp031 led45 cw slr gr psu] with 2 nos 40 mm dia 1.5 mtr. long g.i pipe bracket fixed on the roof of the pump house with properly grout including making power connection by 2 x 1.5 sq. mm copper fr grade flexible wire through pvc casing/conduit with drawing earth conductor (1.0 sq mm copper flexible wire), fitting fixing of 15 amp switch on board with all complete as per direction of eic. 30 earthing confirming to is: 3043 by 50mm dia gi pipe 3.64mm thick x 3.04m long and 1 x 4 swggi (hot dip) wire (4 mts. long), 13mm dia x 80mm long gi bolts, double nuts, double washers including supply & fixing of 15mm dia gi pipe protection (1 mtr long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 mtrs below the ground level and restoring surface duly rammed as below. a) for soft soilby tata - medium gi pipe 31 drawing earth by m.s. flat strip (20mm x 3mm) fromearth bus / electrode to above differentcomponents as per i.e. rules and as per direction of eic. 32 supply & fitting fixing of 100 amp. kit kat (3 nos.)(make : havells) with required size wooden board mounted on wall. 33 supply, delivery & fitting fixing of 48 sweep 230 volt, 50 hz, ac ceiling fan (make : havells/ cg/ approved make) including fitting fixing on ceiling and making electrical connection complete. 34 supply & delivery at site 2 nos. plastic chair & 1 no. plastic table (make: cello / supreme / nilkamal) 35 trial operation and guarding of whole installationas per departmental requirement and guideline 1 no. operator @ 465/- per day with 8.33% bonus. [as per existing departmental terms & conditions] 36 add: 18% gst 37 add: 1% cess

State Government

TRN :49064510 | 14 May, 2025

Tender Value : 0

Gadchiroli - Maharashtra

Tender for rate contract of miscellaneous item for fanancial year 2025-26 for grampanchayat gouripur tah. chamorshi , material , 9 watt led bulb , 12 watt led bulb , 18 watt led bulb , 20 watt led bulb , 23 watt led bulb , 30 watt led bulb , 50 watt led bulb , 12 watt battery backup bulb , 20 watt led tube light , 20 watt led street light , 24 watt led street light , 30 watt led street light , 36 watt led street light , 40 watt led street light , 45 watt led street light , street light clamp,angle and nut-bolt , 50 watt led flood light , 100 watt led flood light , 150 watt led flood light , 200 watt led flood light , holder heavy 6amp , holder6amp , 1/18 wire bundle , 2.5 mm service wire bundle , 1 mm multi wire bundle , 1.5 mm multi wire bundle , 2 mm multi wire bundle , 4 mm multi wire bundle , 4 mm service wire bundle , 6 way moduler board , 6amp socket , 16 amp socket , 6amp switch , 16 amp switch , 3 pin top 6amp , 3 pin top 16amp , meter peti , wooden board , 16 amp main switch , 32 amp main switch , 16 amp mcb , 32 amp mcb , power plug , dp switch , celing fan , wall fan , stand fan , casing patti , cooler 4 feet , cooler 6 feet , cooler , insulation tep , 1 hp submercible pump (ac) , 3 hp submercible pump (ac) , 5 hp submercible pump (ac) , 7.5 hp submercible pump (ac) , 1 hp mono block pump , dcgrundfose motor 2.5-2 , helical shift 2.5-2 , hydrolic kit 2.5-2 , magnetic motor 2.5-2 , trust bearing 2.5-2 , carbon platet bearing , hydrolic cylender , n.r.v , sensor cable , 1 hp starter , 5 hp starter , 1 hp submercible pump (dc) , 3 hp submercible pump+motor +controller (dc) , 5 hp submercible pump+motor +controller (dc) , 7.5 hp submercible pump+motor +controller (dc) , 2.5 mm submercible cable , 100 watt solar panle , 150 watt solar panle , 335 watt solar panle , 545 watt solar panle , 4 mm dc cable , flot (sensor) , cotroler(dc) , 8 mm rope , 1kva inverter +battery 150ah , 2kva inverter + battery 150ah x 2 , 3kva inverter + battery 150ah x 2 , 1kva inverter +battery 150ah solar panle home light system , 3kva inverter +battery 150ah solar panle home light system , 5kva inverter +battery 150ah solar panle home light system , 1kva roof top (solar panle +structure) , 3kva roof top (solar panle +structure) , 5kva roof top (solar panle +structure) , solar kandil , 12 watt led solar street light , 15 watt led solar street light , 12 watt led solar street light with pole and accessories complet , 15 watt led solar street light with pole and accessories complet , 7 mtr solar highmast (octagonal pole, 30 watt solar street light - 5, 30 amp lithium battery - 5, 100 watt solar panle - 5) , 9 mtr solar highmast (octagonal pole ,50 wattled street light - 4, 30 amp lithium battery - 4, 100 watt solar panle - 4) , 9 mtrhighmast light (ac) (octagonal pole, 150 watt flood light - 5 etc…..) , 12 mtrhighmast light (ac) (octagonal pole, 200 watt flood light - 5 etc…..) , water filter 12 lph (ro machine ) , water filter 15 lph (ro machine ) , water filter 20 lph (ro machine ) , water filter 25 lph (ro machine ) , water filter 50 lph (ro machine ) , water filter 500 lph (ro machine ) , water filter 1000 lph (ro machine ) , seadimate candel 25 lph /50 lph , p.p candel 25 lph/50 lph , carbon candle 25 lph / 50 lph , membran ro 100 gpd , membran ro 150 gpd , ro booster pump 150 gpd , ro s.v , ro booster pump 100 gpd , ro smps , water cooler 20+20 , water cooler 20+40 , water cooler 80+40 , refrizrator 180 lph , 32 led tv (smart android) , 43 led tv (smart android) , ahuja sound system (amply 120 watt-1, unit-60 watt-2, bhonge -2, mick-2 mick stand -2) , ahuja sound system (amply 225 watt-1, unit-60 watt-2, bhonge -2, mick-2 mick stand -2) , speaker box , c.c.t.v camera setup (4 cha dvr ) , c.c.t.v camera setup (8 cha dvr) , all in one sound system , fogging machine , 12vo/100ah battery , 12vo/150ah battery , 850 nxg solar inverter , 12vo/1050 watt inverter , 24vo/2300 wattinverter , solar panle structure , 12 way surface box , 8 way surface box , 6 way surface box , battery water 1 ltr , mobile starter , mini ac & dc home light system (light - 3, led light streep - 1 ) , 1.5 ton ac , galvanized structure 3 mtr 950 kg , galvanized structure 4.5 mtr 1100 kg , high mast light , mini structure 350kg , hand pump gi pipe , hand pump connecting rod , hand pump gi pipe socket , hand pump connecting rod socket , hand pump cylender , hand pump upper wall , hand pump lower wall , hand pump wisor kit , hand pump chain heavy , hand pump bearing , hand pump handle , hand pump head , hand pump extention chamber , hand pump speacial water chember , hand pump nut - bolt , hand pump body (complate ) , hand pump pedistall , hand pump excel pin , hand pump wise setup , hand pump connecting dia , clorination doser (dual scheam) , hand pump clorination doser , 30000 lph clorination doser , all in one computer , desktop computer , all in one printer (color) , all in one printer (black and white) , laptop , cpu , ups , projector , 60 ltr dust bin with stand , 80 ltr dust bin with stand , garbage cycle rikshaw , garbage e-rikshaw (battery backup)4 hours , garbage e-rikshaw (battery backup)6 hours , labor sefty kit (solid waste kit) , pvc ghamela , pavla , 20 ltr water can , 70 ltr dust bin (s.s) with stand , bp machine , shugar machine , glucose meter , thermo meter , hb meter , hb streep , hb sahali meter , nebulizer machine , anc table , delevery table , digital weight machine 120 kg , digital weight machine 20 kg , cloroscope , weight machine jholi , tethscope , gi bed 3 x 6 , cushion + pillow + bedsheet , sanitary napkin machine , sanitary despensor machine , sanitary pad , digital watch , statoo meter , stadio meter , radiat warmor machin , auto clove machine , senitizer machine , torch (small) , torch (big) , pratham opchar kit , office almari powder coated 4 feet , office almari powder coated 5 feet , office almari powder coated 5 1/2 feet , office almari powder coated 6 feet , office table 2x4 , office table 2 1/2x5 , office table 3x6 , table cloth 2x4 , table cloth 2 1/2x5 , table cloth 3x6 , table glass 2x4 , table glass 2 1/2x5 , table glass 3x6 , office book case , office wheel chair boss , office wheel chair heavy , office wheel chair , office visitor chair , pvc chair without hand , pvc chair hand , baby chair (a.b.c.d) , three seater bench (s.s) , cement bench , school desk bench (two seater) , school desk bench (three seater ) , fencing jali , cement pole , lagori sanch , school bag , school dress , baby anganwadi dress , pvc elephant , floding slider , chik chik pvc cock , pvc dolphin , pvc 2 way rocker , pvc 2 way seesaw , pvc basketball , dhany kothi 50 kg , dhany kothi 100 kg , green mat 15 x 15 , green mat 15 x 30 , green mat 10 x 15 , sataranjee 8 x 12 , sataranjee 8 x 15 , sataranjee 12 x 15 , bhojan patti , marker board , hand wash station (500ltr tank,3x4 structure, sink 18x24,1/2 tap etc…......) , 200ltr water drum , handicap wheel chair , maskito net , blanket , toy set anganwadi , digital anganwadi , digital school , cricket set , football , wolleball , standard mgr , four seater rotary thril , gi seesaw , slider , lokhandi rack , dayas , baby shoes , sport drees , table cloth 2x4 , table , tabla , harmonium , educational word , carrom board , ring rubber , jumping rope , betbinton , band set , notice board , lokhandi rack , jarmani ganj 2 kg +jhakani , jarmani ganj 3 kg +jhakani , jarmani ganj 5 kg +jhakani , coocker 5 ltr , coocker 7 ltr , shegdi (big) , shegdi +lighter , steel glass , steel plate , steel chamach , nashta plate , nashta chach , corpat / belna , steel charvi , hip twister , leg press , paralel barr , horizontal barr , leg extention , 74 air walker , 500 ltr water tank , 750 ltr water tank , 1000 ltr water tank , 2000 ltr water tank , 5000 ltr water tank , 1/2 upvc pipe (6 mtr) , 1 upvc pipe(6 mtr) , 2 upvc pipe(6 mtr) , 1/2 upvc socket , 1/2 upvc elbow , 1/2 upvc tee , 1/2tap , 1/2brass tap , 1 upvc socket , 1 upvc elbow , 1 upvc tee , 2 upvc socket , 2 upvc elbow , 2 upvc tee , 1/2 upvc ball wall , 1 upvc ball wall , 2 upvc ball wall , 1/2 upvc tank nipple , 1 upvc tank nipple , 2 upvc tank nipple , upvc solvent 120 ml , pvc solvent 500 ml , pvc solvent 1 ltr , 140 mm pvc pipe (6 mtr) , 110 mm pvc pipe (6 mtr) , 90 mm pvc pipe (6 mtr) , 75 mm pvc pipe (6 mtr) , 63 mm pvc pipe (6 mtr) , 140 pvc bend , 140 pvc socket , 110 mm pvc socket , 110 mm pvc tee , 110 mm pvc elbow , 110 mm d-joint , 110 mm end cap , 90 mm pvc socket , 90 mm pvc tee , 90 mm pvc elbow , 90 mm d-joint , 90 mm end cap , 75 mm pvc socket , 75 mm pvc tee , 75 mm pvc elbow , 75 mm d-joint , 75 mm end cap , 63 mm pvc socket , 63 mm pvc tee , 64 mm pvc mta , 65 mm pvc fta , 63 mm pvc elbow , 63 mm d-joint , 63 mm end cap , 110 x 1/2 shadel , 90 x 1/2 shadel , 75 x 1/2 shadel , 63 x 1/2 shadel , 1/2 ferul , 1/2 mdpe pipe , 1/2 mdpe mta , 1/2 mdpe fta , 1/2 mdpe elbow , 2 hdpe pipe , 1 hdpe pipe , 100 mm sluice wall , 80 mm sluice wall , 65 mm sluice wall , 50 mm air wall , 40 mm air wall , rubber sheet , sluice wall nut-bolt , 100 mm flanch , 80 mm flanch , 65 mm flanch , delvary pipe , 110 mm pvc tell piece , 80 mm pvc tell piece , 65 mm pvc tell piece , 2 gi pipe (6 mtr) , 1 gi pipe (6 mtr) , 2 gi gate wall , 1 gi gate wall , 2 gi socket , 2 gi tee , 2 gi elbow , 1 gi socket , 1 gi tee , 1 gi elbow , 1x9 gi nipple , 1/2x9 gi nipple , gi nal complate , installation charges , pipe line khod kam prati mtr , likage repairing

State Government

TRN :49064830 | 14 May, 2025

Tender Value : 0

Gadchiroli - Maharashtra

Tender for rate contract of miscellaneous item for fanancial year 2025-26 for grampanchayat waigaon tah. chamorshi , material , 9 watt led bulb , 12 watt led bulb , 18 watt led bulb , 20 watt led bulb , 23 watt led bulb , 30 watt led bulb , 50 watt led bulb , 12 watt battery backup bulb , 20 watt led tube light , 20 watt led street light , 24 watt led street light , 30 watt led street light , 36 watt led street light , 40 watt led street light , 45 watt led street light , street light clamp,angle and nut-bolt , 50 watt led flood light , 100 watt led flood light , 150 watt led flood light , 200 watt led flood light , holder heavy 6amp , holder6amp , 1/18 wire bundle , 2.5 mm service wire bundle , 1 mm multi wire bundle , 1.5 mm multi wire bundle , 2 mm multi wire bundle , 4 mm multi wire bundle , 4 mm service wire bundle , 6 way moduler board , 6amp socket , 16 amp socket , 6amp switch , 16 amp switch , 3 pin top 6amp , 3 pin top 16amp , meter peti , wooden board , 16 amp main switch , 32 amp main switch , 16 amp mcb , 32 amp mcb , power plug , dp switch , celing fan , wall fan , stand fan , casing patti , cooler 4 feet , cooler 6 feet , cooler , insulation tep , 1 hp submercible pump (ac) , 3 hp submercible pump (ac) , 5 hp submercible pump (ac) , 7.5 hp submercible pump (ac) , 1 hp mono block pump , dcgrundfose motor 2.5-2 , helical shift 2.5-2 , hydrolic kit 2.5-2 , magnetic motor 2.5-2 , trust bearing 2.5-2 , carbon platet bearing , hydrolic cylender , n.r.v , sensor cable , 1 hp starter , 5 hp starter , 1 hp submercible pump (dc) , 3 hp submercible pump+motor +controller (dc) , 5 hp submercible pump+motor +controller (dc) , 7.5 hp submercible pump+motor +controller (dc) , 2.5 mm submercible cable , 100 watt solar panle , 150 watt solar panle , 335 watt solar panle , 545 watt solar panle , 4 mm dc cable , flot (sensor) , cotroler(dc) , 8 mm rope , 1kva inverter +battery 150ah , 2kva inverter + battery 150ah x 2 , 3kva inverter + battery 150ah x 2 , 1kva inverter +battery 150ah solar panle home light system , 3kva inverter +battery 150ah solar panle home light system , 5kva inverter +battery 150ah solar panle home light system , 1kva roof top (solar panle +structure) , 3kva roof top (solar panle +structure) , 5kva roof top (solar panle +structure) , solar kandil , 12 watt led solar street light , 15 watt led solar street light , 12 watt led solar street light with pole and accessories complet , 15 watt led solar street light with pole and accessories complet , 7 mtr solar highmast (octagonal pole, 30 watt solar street light - 5, 30 amp lithium battery - 5, 100 watt solar panle - 5) , 9 mtr solar highmast (octagonal pole ,50 wattled street light - 4, 30 amp lithium battery - 4, 100 watt solar panle - 4) , 9 mtrhighmast light (ac) (octagonal pole, 150 watt flood light - 5 etc…..) , 12 mtrhighmast light (ac) (octagonal pole, 200 watt flood light - 5 etc…..) , water filter 12 lph (ro machine ) , water filter 15 lph (ro machine ) , water filter 20 lph (ro machine ) , water filter 25 lph (ro machine ) , water filter 50 lph (ro machine ) , water filter 500 lph (ro machine ) , water filter 1000 lph (ro machine ) , seadimate candel 25 lph /50 lph , p.p candel 25 lph/50 lph , carbon candle 25 lph / 50 lph , membran ro 100 gpd , membran ro 150 gpd , ro booster pump 150 gpd , ro s.v , ro booster pump 100 gpd , ro smps , water cooler 20+20 , water cooler 20+40 , water cooler 80+40 , refrizrator 180 lph , 32 led tv (smart android) , 43 led tv (smart android) , ahuja sound system (amply 120 watt-1, unit-60 watt-2, bhonge -2, mick-2 mick stand -2) , ahuja sound system (amply 225 watt-1, unit-60 watt-2, bhonge -2, mick-2 mick stand -2) , speaker box , c.c.t.v camera setup (4 cha dvr ) , c.c.t.v camera setup (8 cha dvr) , all in one sound system , fogging machine , 12vo/100ah battery , 12vo/150ah battery , 850 nxg solar inverter , 12vo/1050 watt inverter , 24vo/2300 wattinverter , solar panle structure , 12 way surface box , 8 way surface box , 6 way surface box , battery water 1 ltr , mobile starter , mini ac & dc home light system (light - 3, led light streep - 1 ) , 1.5 ton ac , galvanized structure 3 mtr 950 kg , galvanized structure 4.5 mtr 1100 kg , high mast light , mini structure 350kg , hand pump gi pipe , hand pump connecting rod , hand pump gi pipe socket , hand pump connecting rod socket , hand pump cylender , hand pump upper wall , hand pump lower wall , hand pump wisor kit , hand pump chain heavy , hand pump bearing , hand pump handle , hand pump head , hand pump extention chamber , hand pump speacial water chember , hand pump nut - bolt , hand pump body (complate ) , hand pump pedistall , hand pump excel pin , hand pump wise setup , hand pump connecting dia , clorination doser (dual scheam) , hand pump clorination doser , 30000 lph clorination doser , all in one computer , desktop computer , all in one printer (color) , all in one printer (black and white) , laptop , cpu , ups , projector , 60 ltr dust bin with stand , 80 ltr dust bin with stand , garbage cycle rikshaw , garbage e-rikshaw (battery backup)4 hours , garbage e-rikshaw (battery backup)6 hours , labor sefty kit (solid waste kit) , pvc ghamela , pavla , 20 ltr water can , 70 ltr dust bin (s.s) with stand , bp machine , shugar machine , glucose meter , thermo meter , hb meter , hb streep , hb sahali meter , nebulizer machine , anc table , delevery table , digital weight machine 120 kg , digital weight machine 20 kg , cloroscope , weight machine jholi , tethscope , gi bed 3 x 6 , cushion + pillow + bedsheet , sanitary napkin machine , sanitary despensor machine , sanitary pad , digital watch , statoo meter , stadio meter , radiat warmor machin , auto clove machine , senitizer machine , torch (small) , torch (big) , pratham opchar kit , office almari powder coated 4 feet , office almari powder coated 5 feet , office almari powder coated 5 1/2 feet , office almari powder coated 6 feet , office table 2x4 , office table 2 1/2x5 , office table 3x6 , table cloth 2x4 , table cloth 2 1/2x5 , table cloth 3x6 , table glass 2x4 , table glass 2 1/2x5 , table glass 3x6 , office book case , office wheel chair boss , office wheel chair heavy , office wheel chair , office visitor chair , pvc chair without hand , pvc chair hand , baby chair (a.b.c.d) , three seater bench (s.s) , cement bench , school desk bench (two seater) , school desk bench (three seater ) , fencing jali , cement pole , lagori sanch , school bag , school dress , baby anganwadi dress , pvc elephant , floding slider , chik chik pvc cock , pvc dolphin , pvc 2 way rocker , pvc 2 way seesaw , pvc basketball , dhany kothi 50 kg , dhany kothi 100 kg , green mat 15 x 15 , green mat 15 x 30 , green mat 10 x 15 , sataranjee 8 x 12 , sataranjee 8 x 15 , sataranjee 12 x 15 , bhojan patti , marker board , hand wash station (500ltr tank,3x4 structure, sink 18x24,1/2 tap etc…......) , 200ltr water drum , handicap wheel chair , maskito net , blanket , toy set anganwadi , digital anganwadi , digital school , cricket set , football , wolleball , standard mgr , four seater rotary thril , gi seesaw , slider , lokhandi rack , dayas , baby shoes , sport drees , table cloth 2x4 , table , tabla , harmonium , educational word , carrom board , ring rubber , jumping rope , betbinton , band set , notice board , lokhandi rack , jarmani ganj 2 kg +jhakani , jarmani ganj 3 kg +jhakani , jarmani ganj 5 kg +jhakani , coocker 5 ltr , coocker 7 ltr , shegdi (big) , shegdi +lighter , steel glass , steel plate , steel chamach , nashta plate , nashta chach , corpat / belna , steel charvi , hip twister , leg press , paralel barr , horizontal barr , leg extention , 74 air walker , 500 ltr water tank , 750 ltr water tank , 1000 ltr water tank , 2000 ltr water tank , 5000 ltr water tank , 1/2 upvc pipe (6 mtr) , 1 upvc pipe(6 mtr) , 2 upvc pipe(6 mtr) , 1/2 upvc socket , 1/2 upvc elbow , 1/2 upvc tee , 1/2tap , 1/2brass tap , 1 upvc socket , 1 upvc elbow , 1 upvc tee , 2 upvc socket , 2 upvc elbow , 2 upvc tee , 1/2 upvc ball wall , 1 upvc ball wall , 2 upvc ball wall , 1/2 upvc tank nipple , 1 upvc tank nipple , 2 upvc tank nipple , upvc solvent 120 ml , pvc solvent 500 ml , pvc solvent 1 ltr , 140 mm pvc pipe (6 mtr) , 110 mm pvc pipe (6 mtr) , 90 mm pvc pipe (6 mtr) , 75 mm pvc pipe (6 mtr) , 63 mm pvc pipe (6 mtr) , 140 pvc bend , 140 pvc socket , 110 mm pvc socket , 110 mm pvc tee , 110 mm pvc elbow , 110 mm d-joint , 110 mm end cap , 90 mm pvc socket , 90 mm pvc tee , 90 mm pvc elbow , 90 mm d-joint , 90 mm end cap , 75 mm pvc socket , 75 mm pvc tee , 75 mm pvc elbow , 75 mm d-joint , 75 mm end cap , 63 mm pvc socket , 63 mm pvc tee , 64 mm pvc mta , 65 mm pvc fta , 63 mm pvc elbow , 63 mm d-joint , 63 mm end cap , 110 x 1/2 shadel , 90 x 1/2 shadel , 75 x 1/2 shadel , 63 x 1/2 shadel , 1/2 ferul , 1/2 mdpe pipe , 1/2 mdpe mta , 1/2 mdpe fta , 1/2 mdpe elbow , 2 hdpe pipe , 1 hdpe pipe , 100 mm sluice wall , 80 mm sluice wall , 65 mm sluice wall , 50 mm air wall , 40 mm air wall , rubber sheet , sluice wall nut-bolt , 100 mm flanch , 80 mm flanch , 65 mm flanch , delvary pipe , 110 mm pvc tell piece , 80 mm pvc tell piece , 65 mm pvc tell piece , 2 gi pipe (6 mtr) , 1 gi pipe (6 mtr) , 2 gi gate wall , 1 gi gate wall , 2 gi socket , 2 gi tee , 2 gi elbow , 1 gi socket , 1 gi tee , 1 gi elbow , 1x9 gi nipple , 1/2x9 gi nipple , gi nal complate , installation charges , pipe line khod kam prati mtr , likage repairing

State Government

TRN :49066049 | 23 May, 2025

Tender Value : 0

Kolkata - West Bengal

Tender for supply, delivery & installation of submersible pumping machinery and other electrical / mechanical equipment etc. including allied works for nawpara water supply scheme, t.w. no. iii, block: amta-ii, district - howrah under electrical division, phe dte.- 1 part-a supply and delivery at site submersible pumping machinery directly coupled with wet winding type submersible motor having the following specification pump.duty condition :36 cu.mtrhead :58 mtr.motor : submersible type 3 ph. 50 hz. 400v + 10%, mos:- star deltaimpeller : gm/ ss/ cromesteelmotor winding : wet type.pump outlet - 65/75/100 mm.(test certificate, warranty certificate along with characteristic curve should be submitted at the time of delivery.) 2 supply and delivery at site the following:-upvc 80 mm dia column pipewith both side square threaded (8 tpi)with one socket and o ring biax technology with wiring lock system non corrosive,high tensile having iso 9001 standard. 3 i)3 mtr. long. 4 ii) 1.5 mtr. long 5 iii) 80 mm dia top & bottom adaptor 6 100 mm x 80 mm dia gi reducer 7 supply and delivery at site heavy type suitable dia m.s. suspension clamp for above column pipe along with nuts, bolts and washers etc. 8 supply and delivery at site 80 mm. dia cidf sluice valve- 1 no., 80mm non return valve (swing type - 1 no.) pn - 1.0,80mm ms heavy flange - 1 no., cidf bend 90o - 1 no., cidf / ms (heavy) short piece as required length, 80mm cidf tee - 1 no., reducer, nut bolt and other ci / ms specials etc. as required as per i.s. specification and other required materials for the job i.e. for making complete construction of delivery and wash out lineas per relavant i.s. (test certificate for valve should be submitted at the time of delivery). 9 supply and delivery at site split type m.s. fabricated suitable tubewell cover for the tubewell housing with necessary clamping arrangement including holes for column pipe, air pipe and cable entry etc. 10 supply and delivery at site depth gauge (make : h. guru) 102 mm dia. with steel airbreak pipe required length with all other fittings and accessories for the work including supplying on the good quality hand pump of approve make 11 supply and delivery at site pressure gauge 102 mm. dia and 7 kg. /cm2 range, brass cocks and fitting complete(h.guru) 12 supply and delivery at site 4 sq. mm. 3 core copper 1.1 kv grade pvc insulated water proof flat submersible cable. 13 making safety device for above pump by supplying 3 nos. suitable size ms clamp/ ms cage and 1 dia nylon rope of required length including supplying nuts, bolts, and other materials as per direction. 14 supply & delivery of double flanged three phase 50 hz quarter turn electrical actuator [gear case lubrication : sp68 is:13095, torch switches: 2 x 1 no / 1 nc changeover contact, positional limit switches: 2 x 1 no / 1 nc changeover contacts] operated flange type butterfly valve (pn - 1.0) 80 mm. dia with mechanical position indicator, ci body & disk - is: 210 gr. fg 260, shaft of stainless steel aisi 410 as per bs 5155 ip - 68 / s-2,(test certificate should be submitted at the time of delivery) 15 supply & delivery of 415 v mcc cum pdb. with minimum 2mm thickness and degree of protection ip - 54, conforming to is-8623 withsuitable bus bar, digital voltmeter ammeter, contactor, delay timer, mcb, valve actuator starter etc. with plc logic & ups as detailed in annexure - i7.5 -12.5 hp with sds (star delta starter)panel make : digitek / rnr industries /pce projects / opg power system / ecs.[tc / gc to be submitted along with panel after approval of detail power and control circuit drawing by eic]. 16 supply & delivery of 35 sq. mm. 3 1/2 core pvc insulatedal. armoured cable (1.1 kv grade), is 1554 (part - i) / is 7098 (part-i) make : incab /gloster / nicco / polycab / crystal. 17 supply & delivery of 100 amp. 440 v, 50 hz. tpn main switch with rewireable type fuse link 18 supply & delivery of 100 amp. industrial copper busbar 19 supply & delivery of 4 pole 100 amp changeover unit 20 supply & delivery of 100 amp 4 pole mccb with adjustable overload and adjacent short circuit protection including enclosures. 21 supply & delivery at site of 25 kva, 3 phase oil cooled type servo motor operated wound line voltage corrector conforming to is-9815 [pt-i] 1994 suitable for unbalanced input voltage.input voltage: 3 phase main supply phase to phase 200v-500v 3 servo motor in 3 phase with all protection by mcb (make- abb / siemens/ l&t)output voltage: 3 phase balanced output phase to phase 415v + 1% (test certificate & warranty certificate should be submitted at the time of delivery) 22 supply and delivery of automatic plunger type chlorinator for feeding accurately automatic controlled dosage of chlorine solution into the water by connecting metering pump with flow rate of water 0-100 ltr/hr. with maximum pressure of 10 kg./cm2 suitable dosing pump and other necessary accessories on the delivery pipe line as required. the pump shall be coupled with 1/2 hp motor having 3 phase power and 1440 rpm (+4%).(test certificate will be submitted at the time of delivery) 23 part-binstallation of pumping machinery with valves, pipe & pipe specials, sort piece, presurre gauge including hoisting of column pipe making all electrical and water line interconnection complete as per direction including supply of necessary materials as required for the work. 24 making of tubewell foundation (size- 3x 3x 3.5 approx) as per site situation including supply of necessary materials as bricks, sand, cement, stone chips etc. with plastering & neat cement finishing to complete as per direction. 25 installtion of panel & actuator operated ci butterfly valvewith supply of 12 core 2.5 sq. mm. copper control cable, compensating ms flange, nuts, bolts gasket and other fixing materials as required to complete the job including necessary making of brick pillar as per site situation with supply of necessary materials like bricks, sand, cement, stone chips etc. with plastering & neat cement finishing in all respect including successfull operation along with testing of the whole installation as per entire satisfaction of eic. 26 installation with testing and commissioning of the voltage stabilizer with necessary foundation along with necessary accessories in the suitable position and drawing cable with ms shaddle, making all electrical connection including socketing, crimping to complete the work as per direction. 27 installation of above supplied chlorinator pump set and drawing of power line by supplying of necessary wire and continuous earthing connected to auto/ manual panel. this includes the cost of making necessary brick foundation base with neat cement finish by supplying all requered materials and testing entire set as per direction of eic 28 making internal electrification with 16amp main switch/mcb (make: havells/ any approved) by 1.5 sq.mm frlsh grade copper pvc insulated single core multistrand wire (make: havells/ mescab/ finolex/ any approved) in pvc casing of pump house consisting of 2 nos. bracket point, 1 no. tube light point, 1 no. bulk head point and 1 no. five pin 5 amp. socket point, 1 no. ceiling fan point with controlling switches including supply of 2 nos. bracket with 12w led lamp, 1 no. 20 watt led tube light set, 1 no. outdoor type bulk head with 9w led lamp and drawing of necessary earthing (1.0 sq.mm) material all complete as per direction eic. (led light make: philips/ havells/ any approved) 29 supply and fitting fixing of 45 watt. x 2 nos. led light set [make - philips, model: brp031 led45 cw slr gr psu] with 2 nos 40 mm dia 1.5 mtr. long g.i pipe bracket fixed on the roof of the pump house with properly grout including making power connection by 2 x 1.5 sq. mm copper fr grade flexible wire through pvc casing/conduit with drawing earth conductor (1.0 sq mm copper flexible wire), fitting fixing of 15 amp switch on board with all complete as per direction of eic. 30 earthing confirming to is: 3043 by 50mm dia gi pipe 3.64mm thick x 3.04m long and 1 x 4 swggi (hot dip) wire (4 mts. long), 13mm dia x 80mm long gi bolts, double nuts, double washers including supply & fixing of 15mm dia gi pipe protection (1 mtr long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 mtrs below the ground level and restoring surface duly rammed as below. a) for soft soilby tata - medium gi pipe 31 drawing earth by m.s. flat strip (20mm x 3mm) fromearth bus / electrode to above differentcomponents as per i.e. rules and as per direction of eic. 32 supply & fitting fixing of 100 amp. kit kat (3 nos.)(make : havells) with required size wooden board mounted on wall. 33 supply, delivery & fitting fixing of 48 sweep 230 volt, 50 hz, ac ceiling fan (make : havells/ cg/ approved make) including fitting fixing on ceiling and making electrical connection complete. 34 supply & delivery at site 2 nos. plastic chair & 1 no. plastic table (make: cello / supreme / nilkamal) 35 trial operation and guarding of whole installationas per departmental requirement and guideline 1 no. operator @ 465/- per day with 8.33% bonus. [as per existing departmental terms & conditions] 36 add: 18% gst 37 add: 1% cess

State Government

TRN :49067774 | 21 May, 2025

Tender Value : 0

Bakreswar - West Bengal

Tender for procurement of different consumable items and spares for overhauling of unit-4, 1 and 2 under em-iph dept. at bktps. , silastic 732 rtv (300gm bottle) additional data: (material should be in factory sealed container and mfg. & exp. date should be clearly mentioned / printed at that container) , jointing sheet,asbestos,2000x1500x3 mm # jointing sheet,non-metallic compressed asbestos fibre to withstand 550 degree c,150 ksc is code 2712/9.8 grade w/1,size-2000?1500? 3 mm additional data: brand-champion style 54 super, non-metallic, water gasket, make-champion seals(india) , jointing sheet caf style 59 oil gasket, additional data: additional data:non metalic compressed asbestos fiber withstand 550 degree c,150ksc,2000x1500x3mm,make-champion. , jointing sheet,asbestos,2000x1500x1 mm # jointing sheet non-metallic compressed asbestos fibre to withstand 550 degree c,150 ksc is code 2712/9.8 grade 0/1 size-2000?1500? 1 mm additional data: additional data: brand-champion style 59 oil non-metallic, make-champion seals(india) , thinner -234 for varnish additional data: additional data: 800 gm sealed container, make: dr. beck (material should be in factory sealed container and mfg. & exp. date should be clearly mentioned / printed at that container) , acetone additional data: additional data: make- merck limited, 2.5 ltrs sealed container. (material should be in factory sealed container and mfg. & exp. date should be clearly mentioned / printed at that container) , varnish bectol red additional data: additional data: 1 kg sealed container, make: dr. beck (material should be in factory sealed container and mfg. & exp. date should be clearly mentioned / printed at that container) , paint remover,locktite,sf-790 for generator , varnish bectol grey additional data: 1 kg sealed container, make: dr. beck (material should be in factory sealed container and mfg. & exp. date should be clearly mentioned / printed at that container) , paint synthetic enamel black additional data: make- asian paints / burger. , paint synthetic enamel smoke gray additional data: additional data: 1 ltr sealed container,make- asian paints / burger. (material should be in factory sealed container and mfg. & exp. date should be clearly mentioned / printed at that container) , hardner,hy 840 for eco-ash wa drg.no.: hw5520073007 additional data: additional data: drg.no.hw5520073007, new cat no. hy 140, in 500gm sealed container. make - aradur / huntsman. , resin,cy 205 $for wound stator assy part no.01350801003122 additional data: additional data: part no.01350801003122,wound stator [in 1 kg sealed container.] make- araldite / huntsman. , diluent c,drg:5670269,item no:134 generator , ms plain washer, is: 2016, size- m16 additional data: actual requirement: mat.: g.i., thickness >= 2mm. , nipple?part?list.9139360100400039 additional data: [sample can be provided] , hose ? dia.430 mm length # hose ? dia.430 mm length with fittings grade ph8 design pr.345 bar,insulation resistance 15 megaohms for jacking of 210 mw bhel g enerator shaft , hose 3/8 dia. 430 mm length # with fittings grade ph8,design pr. 276 bar,insulation resistance 15 megaohms# for jacking of 210 mw bhel generator shaft , compressor cr42(3.0 tr) 3ph for split ac for ac plant ductable split ac,make: blue star additional data: alternate make: emerson climate technologies model cr42k6m-tfm-101dm of emerson copeland, 3ph, 380-420 v, r22 , teflon bar,size:50mm diax300mm long , nomex paper,size-1mx2mx0.3mm # additional data: actual required: thick-0.7 or 0.8 mm , temperature controller cum indicator # digital,range,-50 deg c to + 50 deg c,type,dtc,multistain additional data: actual requirement: make:sub-zero, model:sz-7556-p, 0-50 d cen, ip-65, i/p-3.2va max, probe-ntc. , digital temperature controller # size-96mm*96mm,cat code-tc-144 additional data: additional data: make:honeywell,model:t2798i2000,0-50 d cen , switch , water flow, wfs6000, honeywell for ac system stg 2 honeywell automation water flow switch ,wfs6000, honeywell ,150 psi ,15a 250v, fittings 1 additional data: additional data: honeywell wfs-6000, 250v ac, 10kgf/sq cm , fan blade, mat. frp, sweep 12 for eot / lift cabin fan , spring(return) fr master controller # # for fr 25/5toncra additional data: additional data: for 125/30ton eot crane , master controller type:cm5/sr/8 # speed-o-controls voltage: 415v current: 40a , fan,cabin,sweep 400mm,1 ph,50 hz,230 v # additional data: additional data: make :powervent / cinni/ polar / rallifan / remi / uniflow. motor: copper coil with rated capacitor , fan pedestal # additional data: additional data: industrial heavy duty pedestal type air circulators complete with 4 wings cast aluminium alloy impeller. sweep - 600 mm (24 inch) or 750 mm (30inch), 1 ph, 230 volts, 1440 rpm, 160 -250 watts, make : powervent, cinni, polar, rallifan, remi, caravan electricals. , contact block assembly,cba,240v # speed-o-controls additional data: additional data:for eot crane, make: speed-o-control , switch,hp & lp combine cut-out,kp-15 for ac plant , dye shaft of ac cooling tower, model-6kf for central air condition system shaft length - 735mm. both side 19mm thick plate with 35mm hole dia for bolting. shaft including all accessories viz. nut-bolts, w , compressor,model:kcg572hae-d512 5.0 tr # emerson climate technologies reciprocating,hermetically sealed,3phase,50hz,400v,lra-55,oil- 76mtn,refrigerant,r-22 additional data: equivalent model cr72kqm-tfm-233dm of emerson copeland, 3ph, 380-420 v, r22 , water pump seal:19mm rc $for ac plant control and accessories , water pump seal,16mm rc,chw,swas,st-ii for ac plant for chiller pump,wet swas system , bearing housing for pump model bsn80/100 for ac plant make-mather & platt additional data: make-mather & platt , stud bolt / i-bolt for pump,bsn 80/100 for ac plant pump model: bsn 80/100,make-mather & platt additional data: moc:-steel,make-mather platt. , sleeve for pump,model:bsn 80/100 for ac plant bktpp make-mather & platt additional data: make-mather & platt , lock out switch,mushroom head # lock out switch with key (02 no keys each),dia 22 mm additional data: cat. no. rcp2bs14, make- c&s , fuse,power,415v,63a # additional data: size=0, 63 a, csdfl00 , fuse,power,415v,32a # , power contactor lc1d80 additional data: coil voltage: 240v.80a, make-c&s , relay,thermal o/l,63-80a,3ua5800-2uz2 siemens , with spp additional data: actual required: 3ua5800-2uz1 (with ring type end connection) with mounting base, make- siemens , selector switch,2 position,rcb2-bd21 with carrier , power contactor 50a,tp,230vac # siemens with 1no+1nc cat.no.3rt2036-1a-l20-6la068k additional data: siemens(3tf)/l&t(mnx-50) , spp, phase failure relay, type: vsp-d1 minilec aux. supply voltage-415v ac additional data: actual req.: aux. supply voltage-230v ac , power contractor,85a,mnx-95 l&t with 2no+2nc contact coil-230vac,ac-3 duty , heater,u shape heater 2 kw 415v # additional data:detail description: heating element for fluidzing blower system, rating 415v ac, operating temp 90-120, type: incoloy sheathed (u-shaped),sheathed m.o.c- ss304, resistance alloy: nichrome (80% nickel + 20% chrome), length: 100mm, . requirement: 2kw: 18 nos. & 1.5kw: 18nos. , o/l relay 415v ac 3ua-5000-1c 1.6-2.5a # additional data: including mounting base , contactor main 415v ac lc1-f-115 115a additional data: coil: 230v ac , push button,dia: 22.5 mm,colour: red additional data: 230v ac , push button,dia: 22.5 mm,colour: green additional data: 230v ac

Central Government/Public Sector

TRN :49068676 | 28 May, 2025

Tender Value : 20.00 Lacs

Bikaner - Rajasthan

Tender for tender for welcome maintenance to officers md accommodation at af station nal; 1 demolition of brick or stone masonary built in cement mortar incl all quoins, arches, pillar etc. complete all as specified and directed. 2 material and labour brick work with sub class -b bricks old size, straight or curved on plan exc 6m mean radiusbuilt in cm 1:6. complete all as specified & directed. 3 all as per serial item no. 2.00 (here in before) but as in half brick thick walls built in cement mortar 1:4. 4 taking down chawkhat or frame with shutter (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed. 5 taking down chawkhat or frame with shutter (without taking off shutters from the frames) exc 1.5 sqm but not exc 4.0 sqm each complete all as specified and directed. 6 taking down door shutter of any description exc 1.00 sqm but n. exc. 2.00 sqm each complete all as specified and directed. 7 taking down wooden shutters of any description exc 1 sqm but n.exc 2 sqm each from chowkhat and re-fixing in same opening after re-securing or easening and adjusting including repair of hinge as required complete all as specified and directed. 8 s&f solid pvc door frame of size 50mm x 47mm made out 5mm both side prelam pvc sheet used instead of plain colour pvc sheet & edges will be painted to match with prelam sheet re-inforced with ms square tube complete all as specified and directed. 9 m&l for factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of ms tubes 40mm x 20 mm for top and bottom rails ms frame shall be covered with heat moulded prelam pvc ‘c’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam colour pvc sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottam rail both side prelam pvc sheet used instead of plain colour pvc sheet. stile and rails feathered at edges paneling of prelam solid pvc sheets 10mm thick to be filted in msframe 40 x 20 mm welded, sealed to the stiles and rails with suitable pvc sheet beading, and jointed together with the solvent cement complete all as specified and directed. 10 s&f 1.25 mm thick pressed steel frames of size 125mm x 60mm for double doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including filling back hollow with pcc 1:3:6 type c-0 using 12.5 mm graded stone aggregate complete all as specified and directed. 11 s&f 1.25 mm thick pressed steel frames of size 105mm x 60mm for double doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including filling back hollow with pcc 1:3:6 type c-0 using 12.5 mm graded stone aggregate complete all as specified and directed. 12 s&f 35 mm thick 2nd class hard wood factory made plain framed, pannelled shutter (any number of panels) with panel of timber flat on both sides (feather edged) or of 12mm thick bwp commercial plywood with commercial face veneers, supplied and fitted complete all as specified and directed. 13 supply and fixing glazed and gauged skeleton factory made shutters35mm thick, 2nd class hard wood hollockopen rebated and prepared to receive glass, gauge etc (with sash bars) edges of framing plain chamfered or rounded fitted with cutand mitred beads for securing glass etcincl priming coat. the size of member of shutters as spfd in ssr part-1 section 8 clause 8.20 (b) incl kiln seasoned and chemically pressure treated, complete all as specified & directed. 14 s&f30mm factory made thick flush shutters, solid core construction,with particle board coreand plywood face panels,commercial type on both face is covered with decorative face veneer with lipping/frame to match sides includeforthe provision of suitable blocks for taking mortice locks, latches, or other fittings complete all as specified and directed. 15 s&f butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, 100mm size, isi marked, complete all as specified & directed. 16 supply and fixing200mm size aluminium anodised barrel tower bolts of extruded section, complete all as specified and directed. 17 supply and fixing 150mm sizeextruded aluminium alloy handles, fabricated type, anodised aluminium handles, complete all as specified and directed. 18 supply and fixing 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed. 19 supply& fixingas in repairfloor door stopper of aluminium alloy body and tongue, overall length of cover plate 140 mm anodised with hard drawn steel spring, fixed to door shutters,complete all as specified and directed. 20 supply and fixing galvanised stainless steel wire cloth 0.45mm nominal dia of wire and width of aperture 1.40mm and fixed with tinned tacks or galvanised wire stapples/ screws in metal surrounds as required fixedcomplete all as specified and directed. 21 all as per description of serial item no. 20 here in before but as in repair 22 hacking out old broken glass of any thickness/size of any description from wooden frames/metal frame glazed with putty or fixed with beads all as specified. 23 supply and fixing 3mm thick sheet glass, ordinaly quality and glazing with oil putty or secured with spring clips in metal surrounds as required in square n exc 0.5 sqm in each pane , complete all as specified and directed. 24 all as per description of serial item 23 here in before but figured glass, pin head type. 25 s&f as in repairs door closer hydraulically regulated cast iron body, designation no 2, universal type, suitable for door shutters of size 701 to 850 mm in width and of weight between 36 to 60 kg,complete all as specified and directed. 26 s&f as in repair mild steel 300mm, ordinary rat tail rod pattern springs, including roller and roller pleat complete all as specified and directed. 27 s&f in repair stainless steel (grade 305) curtain rods 25mm dia 0.80mm wall thickness mild steel chromium plated incl supporting brackets complete all as specified and directed. 28 s&f in repair stainless steel (grade 305) ornamental type brackets (open ends) suitable for curtain rods of 25mm dia all as specified and directed. 29 s&f in repair stainless steel (grade 305) brackets (dead ends) suitable for curtain rods of 25mm dia all as specified and directed. 30 demolition of cement concrete in any positionand removing the rubbish outside mod land complete all as specified anddirected. 31 m&l for pcc (1:3:6) type c-2, using 40mm graded stone aggregate as in plinth protection 75mm thick laid in bays including all necessary form work, finishing exposed edges fair and providing 10 mm wide joints throughout the thickness of plinth protections duly filled with matic filling(one part of hot bitumen 85/25 and three parts of sand)and surfaces finished even & smooth without using extra cement complete all as specified . 32 m&l 25mm thick pcc 1:2:4 type b-0(using 12.5mm graded stone aggregate)as in sub base of floor surface finished even rough to receive floor topping complete all as specified and directed. 33 dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar complete all as specified and directed. 34 m&l for granite (of any type)slab 18-20 mm thick machine cut ,bedded and jointed with gray cement slurry and pointed with white cement as in floors/ cooking plateform, with admixiture of pigment to match the shade of granite stone including grindingand polishing complete over and including20 mm thick screed bed in cm 1:6 complete all as specified . 35 m&l for granite (of any type)slab 18-20 mm thick machine cut , jointed with gray cement slurry and pointed with white cement as in vertical surfaces / dado / skirtingwith admixiture of pigment to match the shade of granite stone indluding grindingand polishing complete over and including10 mm thick backing coat in cm 1:4 complete all as specified . 36 m& l green marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade, including grinding and polishing providing edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete complete complete all as specified and directed. 37 dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish off the premises complete all as specified. note:-the demolished material should be disposed off out side the mod land. the contractor shall quote his rates considering the above element 38 material and labour for glazed ceramic coloured tiles 7 to 8mm thick (square/rectangular )in vertical surface area of each tile exceeding 0.13 sqm but not exceeding 0.18 sqm thick set & jointed in neat gray cement slurry and pointed with coloured cement to match,the sahde of tiles laid over and including 10mm thick rendering in cm 1:4 complete all as specified and directed. 39 material and labour non-skid, ceramic coloured tiles 7 to 8mm thick (square/rectangular ) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,as in floors, set and jointed ingray cement slurry and pointed in white or coloured cement to match with the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cm 1:6 as specified and directed. 40 material and labour non-skid, ceramic, coloured tiles 7 to 8mm thick (square/rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,as in floors, set and jointed ingray cement slurry and pointed in white or coloured cement to match with the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cm 1:6 as specified and directed. 41 material and labour non-skid, ceramic, coloured tiles 7 to 8mm thick (square/rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in skirting, set and jointed ingray cement slurry and pointed in white or coloured cement to matchthe shade of tiles laid over and including 10mm thick backing coat on fair faces of brick work or concrete surface in cm (1:4) complete all as specified and directed. 42 m&l for vitrified light shade ceramictiles9 to 10 mm thick polished,area of each tile exc 0.18 sqm andn exceeding 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cm 1:6 complete all as directed by engr-in-charge. 43 all as per ser item no.42 (here in before) but as in skirting laid over and including 10mm cement backing in cm 1:4. 44 material and labour for repairing of soffits of slabs/chajja, facia and similar works by dismantling of loose/ disintegrated portion of rcc upto 7.5 mtr heightand in any sitution, including provn of support,formwork and welding of reinforcement and fixing in position and with provision of weld mesh, applying dubbing 1st coat of 20 to 25mm thick in cm 1:3 finished rough and finishing coat of 10mm thick in cm (1:3) finished even and smooth without using extra cementover and including cement slurry @ 3 kg/sqm, finished even and smooth to desired shapeand applyingtwo coats of weather proof exterior emulsion paint over a coat of arylic resistant primer to match with existing surfaces complete all as specified and directed.(weld mesh measured and paid sepatrtely)note:-(i) unit rate of this item includes the cost of scaffolding, formwork etc. and nothing extra shall be paid on account of variation in height.(ii) for payment purpose, the area of finished plaster in 2nd coat shall be considered. 45 material and labour for hard drawn steel wire fabric (weld mesh) of weight not less than 3 kg/ sqm and not exc 4 kg/ sqm cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcemnt including necessary fixing arrangements etc complete all as specified and directed. 46 taking down cementplaster of any description on brick wall surfaces etc including raking out joints hacking for key , scrubbing down down with water etc complete all as specified and directed. note:- the demolished materials should be disposed off at a site as described by the eng-in-charge. the contractor shall quote his rates considering the above element. 47 m&l for rendering 10 mm thick on ceiling (brick or concrete surfaces)in cement mortar 1:4 and surface finished even and smooth without using extra cement complete all as specified and directed. 48 m&l for rendering 15mm thick on brick or concrete surfaces in cement mortar 1:6, finishing surfaces even and smooth without using extra cement complete all as specified and directed. 49 m&l forrendering 15mm thick on brick or concrete surfaces other than fair face of brick work in cement mortar 1:4, finishing surfaces even and smooth without using extra cement complete all as specified and directed. 50 m&l for applying three coats of white wash on newly plasteredsurfaces of ceiling including preparation of surfaces complete all as specifed and directed. 51 m&l for preparation of newly plastered or unplastered surfaces of walls and applying two coats of exterior acrylic emulsion in any pattern (approved by ge), paint over and including a coat of exterior primer complete all as specified and directed. 52 m&l for preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil emulsion distemper white or tinted over and including a coat of primer complete all as specified and directed. 53 material & labour for prepapration of new or previously untreated surfaces of wood or wood based materials of any description not otherwise described over 10cm width or girth & applying two coats of synthetic enamel paint over & including a coat of pink primer comlplete all as specified and directed. 54 material & labour for prepapration of new or previously untreated steel or iron surfaces of any description not otherwise described over 10cm width or girth & applying two coats of synthetic enamel paint over & including a coat of red oxide primer comlplete all as specified and directed. 55 material and labour for preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl brooming down with steel wire brushing scrapping down smoke soot moulds moss and efflorescence salts and trading oil and grease spot, washing etc. and applying one coat of white lime wash complete all as specified. 56 material and labour for preparation of plastered or unplastered old decorated surfaces of ceiling etc. incl pillasters and cornices etc. incl brooming down with steel wire brushing scrapping down smoke soot moulds moss and efflorescence salts and trading oil and grease spot, washing etc. and applying one coat of white lime wash complete all as specified. 57 material and labour for preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl brooming down with steel wire brushing scrapping down smoke soot moulds moss and efflorescence salts and trading oil and grease spot, washing etc. and applying one coat of oil bound distemper complete all as specified & directed. 58 material and labour for comple removal ofold decorated surfaces of walls incl pillasters and cornices etc. incl brooming down with steel wire brushing scrapping down smoke soot moulds moss and efflorescence salts and trading oil and grease spot, washing etc. and applying two coats of oil bound distemper complete all as specified & directed. 59 m&l for complete removal of existing treatment on walls and applying two coat ofoil bound distempe paint interior gradeover & including a coat of alkali resistant priming paint over 7 including two layer of birla wall putty (min thickness 3mm) incl filling in craks etc to achieve a uniformsmooth finish incl preparationof surfaces complete all as specified & directed . 60 material and labour for preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl brooming down with steel wire brushing scrapping down smoke soot moulds moss and efflorescence salts and trading oil and grease spot, washing etc. and applying one coat of plastic emulsion complete all as specified & directed. 61 m&l for preparation of old painted surface of wood and wood based materials of any description not otherwise described over 10 cm. width or girthshallapplying one coat of synthetic enamel painting overthe wooden surfaces all as specified & directed. 62 m&l for preparation of old painted surfaces of steel and iron work of any description exc 10 cm width or girth applying one coat of synthetic enamel paint on steel surface all as specified. 63 taking up or down 15 mm bore steel tubing & connections including clearing for refixing or removal to store complete all as specified and directed. 64 all as perserial item 63 here in before but 20m bore tubes 65 supply and fixing15mm bore tubes “medium grade”, galvanized, with and including all fittings and fixed completetowalls and ceilings or laid in floors,complete all as specified and directed. 66 all as per serial item 65 here in before but 20m bore tubes 67 s&f as in repair pillar taps long body fancy type quarter turn with capasten head chromium plated screwed down high pressure with without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed. 68 supply and fixing as in repairs bib cock quarter turn cast copper alloy chromium plated, fancy type, long body screwed for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed. 69 s & f as in repairs two way angle cock quarter turn cast copper alloy 15 mm bore chromiun plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unioin fixed complete all as specified and directed. 70 s & f as in repairs angle cock quarter turn cast copper alloy 15 mm bore chromiun plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unioin fixed complete all as specified and directed. 71 supply and fixing as in repair central hole basin mixer long swang nack, without poup waste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed. 72 supply and fixing as in repair central hole sink mixer long body swang nech for mixing hot & cold water, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed. 73 s&f as in repair brass cp wall mixer 3-in-1 system with provision for both hand shower and over head shower complete with 115mm long bend pipe, connecting legs and wall flange for mixing hot and cold water screwed down for iron pipe 15 mm complete all as specified and directed. 74 s&f as in repair brass cp wall mixer 2-in-1 system with provision for over head shower complete with 115mm long bend pipe on upper side, connecting legs and wall flange for mixing hot and cold water screwed down for iron pipe 15 mm complete all as specified and directed. 75 supply & fixingas in repair chromium platedshower rose with or without swivel joints 125mm dia including fixing to steel pipe,complete all as specified and directed. 76 supply& fixing as in repair toiletpaper holder of brass chromium plated, complete all as specified and directed. 77 supply& fixing as in repairs pvc (ptmt) float valve,high pressure of ptmt with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed suitable for 20mm bore pipe,complete all as specified and directed. 78 supply& fixing as in repairs pvc waste down pipeof 32/40 mm bore for basin, complete all as specified and as directed. 79 supply and fixing as in repairs 15mm dia pvc connection of length 450 mm, with ptmt nut, complete all as specified and directed. 80 supply and fixing as in repairs faucet health (hand jet) 15mm bore cast copper alloy, chromium plated with flexible chromium plated connection pipe 1.5 mtr length, with fittings, complete all as specified and directed. 81 supply& fixingas in repairs wash hand basin, vitreous china, white, decorative type, flat or angleback, size 580mm x 450mm inclusive ofwaste pipe and brass coupling and including cutting for and pinning in ends of brackets or erecting stand and inclusive of cost of brackets complete all as specified and directed. 82 s&f as in repair vitreous china pedastal pattern, wc incl connection to trap, and to flushing pipe anti-syphonage pipe, etc. complete all as specified and directed. 83 s&f in repair rimless single piece wc with uf soft close slim seat cover, hinges, fixing accessories set , incl cisternfittings, size 385x720x715mm complete all as specified directed by engr-in-charge. make: jaguar/cera/hindware 84 supply and fixing as in repair pvc valve less syphonic action type flushing cistern low level white with pvc in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including pvc connection and 32mm dia pvc long bend for squat pattern etc, set with concrete and making good to floor including taking down existing, fixed as in repairs complete all as specified & directed. 85 s&f as in repair ptmt seat cover white colour for padastal pattern,incl connection nut & bolts, etc. complete all as specified and directed. 86 s&f as in repair sinks with drain board made of stainless steel sink of 1mm thick sheet, kitchen or laboratory with plug washer and waste pipe incl bedding in cement mortar 1:6 on to draft wall of including fixing cantilever brackets and connecting unions overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm fixed as in repairs complete all as specified. 87 supply& fixingas in repair pvc bath cabinet, size 622mm x 422mm, comprising of lookingglass, space for bath soaps, shampoo, tooth brush and paste, hand towel rail, complete all as specified and directed. 88 supply and fixing in repair stainless steel towel rack 600mm long with lower hangers incl 3 hooks complete all as specified and directed. 89 supply and fixing in repair brass chromium plated tubular towel rail 20mm dia d type 60 cm long between flanges complete all as specified and directed. 90 supply and fixing as in repair soap dish chromium plated of size 100 x 100 mm any type, fixed with chromium plated brass screwscomplete all as specified and directed. 91 s & f as in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, bracket guard and railing 60cm long incl screws, complete all as specified and directed. 92 s&f as in repairs corner glass shelf with cp brackets (3 pcs set having size 8,10 & 12)complete all as specified and directed. 93 demolition and breaking up drain pipes 110/75 mm bore (salt glazed ware, ac or reinforced concrete) set in cement mortar complete all as specified and directed. 94 s&f 110mm dia pvc (swr) pipes single socketed in any length with rubber ring joints fixed to wall &laid in trenches or in floors,including clamps as required, complete all as specified and directed. 95 s&f 75mm dia pvc (swr) pipes single socketed in any length with rubber ring joints fixed to wall &laid in trenches or in floors,including clamps as required, complete all as specified and directed. 96 s&f in repair 75mm dia pvc (swr) floor trap plain with cp grating including jointing with solvant cement incl necessary pcc & form work as required complete all as specified and directed. 97 s&f 75mm dia pvc (swr) bends with rubber ring joints fixed as required with oval access door complete all as specified and directed. 98 s&f 110mm dia pvc (swr) bends with rubber ring joints fixed as required with oval access door complete all as specified and directed. 99 s & f 110mm bore pvcswr junction single (single t) with access door complete all as specified and directed 100 s&f in repairs stainless steel plate rack of size 78cmx91cmx25cm made out of 0.80 mm thick of stainless steel sheet , fixed in wall with rawl plugs and screws complete all as specified and directed. 101 dismantling boarding, any description any size , fixed in any position with screws complete all as specified . 102 m& l for 18 mm thick pvc board celuka ply of density 600kg/cum one side prelam/rigid laminated (colour/shade as approved by engr-in-charge) and other side plain white colour to make kitchen cabinet shutters /shelves/partitions and incl all required brackets ss screws etc, approved by engr-in-charge. 103 m& l for 18 mm thick pvc board celuka ply of density 600kg/cum both sidesplain white colour to make kitchen cabinet shutters/shelves/partitions and all required brackets ss screws etc, approved by engr-in-charge. 104 s&fin repair auto closes clip on cabinet hinges (regular) for kitchen cabinet shutters note : each pair means one piece fixed on openable shutter and other piece fixed on fixed portion. 105 s&fin repair stainless steel (ss 304) handles 100 mm size for kitchen cabinet shutters. 106 s&fin repair ball bearing drawer channel telescopic type (500mm) full extention load of load bearing capacity 45 kg.note : each pair means 2 nos of telescopic channel, one piece fixed on left side and another piece fixed on right side. 107 s&f rab door seal bottom brush duststopper with aluminium plate nylone brush of selected colour for fit each complete all as specified and directed. note : the sample of item shall be approved by ge before placing at site 108 supply and fixing powder coated aluminium (minimum thickness of powder coating 50micron) work for frames of doors, windows,ventilators and partitions (fixedportions) with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, c.p. brass/ stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge note:-for payment purpose weight of aluminium section will only be measured 109 providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of epdm rubber/ neoprene gasket required (fittings such as hinges,handle,tower bolt,sliding boltshall be paid for separately) with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, c.p. brass/ stainless steel screws,rollers & dust proof brush for sliding door / windowcomplete all as per architectural drawings and the directions of engineer-in-charge note:-for payment purpose weight of aluminium section will only be measured 110 s & f as aluminium grill of size, 85mm x 85mm hexagonal shaped mesh, fixed to aluminium frame work with u clip of size 15mmx12mm & fastners complete all as specified and directed. 111 s & f4.80 mm thick sheet glass ofordinary quality plain / tintedand glazing with rubber beads, clips etc complete all as specified and directed. 112 s & f 3 mm thickhigh quality, durable acrylic panel sheet and glazing with rubber beads, clips etc complete all as specified and directed. 113 s & f double action floor door spring hydraulically regulated made up minimum1.25 thick aluminium alloy sheet foundation box, main body stainless steel cover, with governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified 114 s&f conceled lock (push to unlock) for sliding window made with zinc body, aluminium hook and anti rust material with power coated metallic finish of approved colour having size100mm x 24 mm incl necessary cutting for fixing all as specified and directed.

State Government

TRN :49069074 | 15 May, 2025

Tender Value : 3.68 Crore

Madhopur - Rajasthan

Tender for tender for major repair and modernization of existing emrs barnala (raj) - 1 earth work in surface excavation not exceeding 30cm. in depth but exceeding 1.5 meter in width as well as10 sqm on plan including disposal of excavated earth up to 50 mtr. and lift up to 1.5 mtr. disposed soil to be levelled and neatly dressed : all kinds of soil 2 earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils 3 supplying and filling in plinth with river sand under floors including watering ramming consolidating and dressing complete including cost of sand 4 providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). 5 centering and shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings,strap beam, raft , bases of columns etc. 6 providing and laying in position specified grade ofcement concrete forall rcc structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement.m20 grade nominal mix / design mix providing m-25 grade concrete by usingcement as per codal provision instead ofm-20 grade design mix. 7 random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:nt mortar 1:6 ( 1-cement : 6-sand). 8 anti termite treatment of floor using imidacloprid 30.5% ec non repellent, odorless, low dose, environmentally safe terniticide with rapid action non corrosive stain free, by drilling 12mm diameter holes 300mm apart injecting the emulsion as per specification and plugging with cement mortar 1:2 ( 1 cement : 2 coarse sand) in the whole floor area dpe 12mm dia termitube system with required number of junction boxes are to be installed. the termitube will run all along the perimeter wall both inside and outside. in the middle area the termitube to be installed at an interval of 1.00 mtr. or less both ways as required with sufficient number of junction boxes to pump the emulsion. after successful testing of termitube, pesticide emulsion of imidacloprid 30.5% ec mixed with water in the ration of 1:474 will be pumped by a motorized spray pump from the junction box in specified manner. the plinth area of the area treated will be measured for payment. 9 centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel propsand removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. 10 centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel propsand removal of formwork for upto floor five level for : suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates,anchorblocks,sills,chhajjas,lintel,beam, plinth beam etc. 11 providing and laying in position specified grade ofcement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcementfor walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix / design mixproviding m-25 grade concrete by usingcement as per codal provision instead ofm-20 grade design mix. 12 providing and laying in position specified grade ofcement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcementfor beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix 13 providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. (original producers who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to is:1786) thermo-mechanically treated bars (conforming of relevent is code) 14 brick work with f.p.s. bricks of class designation 75 in superstructure above plinth level upto floor v level in all shapes and sizes in : cement mortar 1 : 4 (1 cement : 4 coarse sand) 15 half brick masonry in superstructure , above plinth level upto floor vlevelusing bricks of designation 75cement mortar 1 : 4 (1 cement : 4 coarse sand) 16 carriage of materials:earth,sand ,line morrum,manure or sludge , lead up to 5km 17 filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. 18 random rubble dry stone kharanja under floor. 19 p & f 1st quality heavy duty vitrified double charged tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to is 15622 of approved make in all colour and shade, laid with 20 mm thick cm 1: 4 including grounting the joints with white cement and matching pigment etc complete. size600 mm x 600mm 20 rough chisel dressed sandstone 35 mm thick flooring of approved shade setover 20mm thick base of cement mortar 1:6 (1 cement : 6 coarse sand) and pointingwith cement sand mortar 1:3 with pigment to match the shade of stone with joint thickness up to 15 mm complete in all respects : red sand stone (karauli stone) 21 providing and fixing marble stone flooring table rubbed, 15-18 mm thick over 20mm (av.) thick base of cm 1:4 (1 cement : 4 coarse sand) jointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. slabs bhaislana,abu,kishangarh zebra(black marble) above 3601 cm2 slabs 22 extra for providing edge moulding to 15-18mm thick marble/ granite/kota stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by engineer-in-charge. granite/kota stone work full edge moulding 23 plaster on new surface on walls in cement sand mortar 1:4 including rackingofjointsetc. complete fine finish : 20mm thick . 24 extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. 25 6 mm thick cement plaster to ceiling of mix1:3 (1cement : 3-fine sand) 26 providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to is : 13753 & is :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). 27 providing and fixing ist quality mat finished ceremic tile size 300x300mm confirming to is : 13753 coloured tile expect white, grey, ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler power (untile or roffe make) and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster). 28 providing and fixing pressed steel door frames confirming to is 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applyinga coat of approved steel primer after pre-treatment of the surface including filling with cc 1:2:4(m15 grade) complete as directed by engineer-in-charge :profile c 29 providing and fixing external grade board solid core single leaf flush door shutters isi 2202-67 marked using phenol formal dehyderesinin glue both sides with approved steel fittings complete as per annexure a: 35 mm thick commercial veneer both side 30 providing and fixing factory made p.v.c. door frame of size 50x47mm with a wall thickness of5mm, made out of extruded 5mm rigid pvc foam sheet mitred at corners and joined with 2 nos. of 150mm long brackets of 15x15mm m.s. square tube, the vertical door profiles to be reinforced with 19x19mm m.s. square tube of 19 gauge, epdm rubber gasket weather seal to be provided through out the frame. the door frame to be fixed to the wall using m.s. screws of 65/100mm size complete as per manufacturers specification and direction of engineer-in-charge. 31 providing and fixing to existing door frames. 30mm thick factory made solid panel pvc door shutter consisting of frame made out of m.s. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles and 15 mm x15mm , top & bottom rails. m.s .frame shall have a coat of steel primers of approved make and manufacture m.s. frame covered with 5mm thick heat moulded pvc ‘c channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on either side forming stiles; and 5mm thick, 95mm wide pvc sheet out of which 75 mm shall be flat and 20mm shall be tapered in 45 degreeon the inner side to form top and bottom rail and 115mm wide pvc sheet out of which 75 mm shall be flat and 20mm shall be tapered on both sides to form lock rail. top bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2) thick, 20mm wide cross pvc sheet shall be provided as gap insert for top rail & bottom rail. panelling of 5mm thick pvc sheet to be fitted in the m.s. frame welded/ sealed to the stiles & rails with 7mm (5mm +2mm) thick x 15mm wide pvc sheet bending on inner side, and joined together with solvent cement adhesive. an additional 5mm thick pvc strip of 20mm width is to be stuck on the interior side of the ‘c channel using pvc solvent adhesive etc. complete as per direction of engineer-in-charge, manufacture’s specification & drawing.(for w.c.and bathroom door shutter). 32 providing and fixing of upvc casement openable windows (outward / inward): outer frame made from the extruded upvc windows profile section of size 60w x 60h mm having outer wall thickness of 2.5mm (+/- 0.2mm) and three chamber constuction, white in finish, duly reinforced with 1.5mm thick gi section. all the four corners shall be mitered cut & thermal welded so as to form window frame. frame shall be milled with drain and air equalizer hole in order to be water tight and for drainage of accumulated water, if any, to outer side. fix mullion made of 60w x 80h mm upvc profile section with steel reinforcement shall be provided in windows having 2 or more openable shutters, as per the requirement. frame shall have co-extruded with epdm/tpe-e gasket fitted in in-built groove of frame profile for proper air & sound insulation of the shutter.the shutter of outward openable window shall be made of size 60w x 74h mm and shutter of inward openable window shall be made of size 60w x 77h mm extruded 3 box multi-chamber upvc window profile section of white colour having outer wall thickness of 2.25mm (+/- 0.2mm) provided with reinforcement of 1.5mm thick gi section duly mitered cut & thermal welded at all corners and fitted with upvc glazing bead of size 36 x 20mm with inner and outer co-extruded epdm/tpe-e weather seal gasket alongwith 6mm thick isi make plain float glass. all welding joints of frame and shutter shall be cleaned and milled with the cnc mechainism to provide uniform grooved finish on all visible jaints. hardware: window shutter are fixed with frame on 2.5mmthick ss301 grade friction hinge system to keep the window opened at desired angle. friction hinge also enables easy cleaning of glass on both side from the inside of building. 33 providing and applying white cement based puttyover plastered surface to prepare the surface even and smooth complete new plastered surface (three or more coats) 34 wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding:two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. 35 painting exterior surface ofwallwith 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty,etc complete in all respect including scaffolding and safety provisionnew work 36 painting with synthetic enamel paint of approved brand and manufacture togive an even shade :two or more coats on new work 37 french sprit polishing : two or more coats on new work including a coat of wood filler 38 providing and fixing stainless steel railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). grade 304 39 providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide 40 grading roof for water proofing treatment withwater proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 41 providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2coarse sand : 4 stone aggregate 10mm and down gauge) includingfinishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 42 providing & laying broken glazed titles on roof ( broken glazed tilesnot less than 9 kg/sqm) on top of hot bitumen @ 1.7 kg/sqm. (1.40 kg ofvg-40 (30/40 )grade and 0.30 kg/sqm. ofvg-10 (80/100) grade) and joints filled with cement mortar 1 :2 (1 cement:2 marble dust mixed with water proofing compund all complete as per direction of engineer-in-charge. 43 providing and fixing in position collapsible steel shutters with vertical m.s. channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x 5mm. size with top and bottom rail of t-iron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (to be measured and paid as per outer dimension). 44 making grooves as per design in plaster 10mm to 20mm wide. 45 making khurras 450 x 450mm with average minimum thickness 50mmcement concrete 1 : 2:4 over p.v.c. sheet 1 mtr. x 1 mtr. x 40micron finished with 12mm cement plaster 1 : 3 and onecoat of neat cement, rounding edges and making and finishing the out let complete. 46 providing and laying damp-proof course with cement concrete grade m-150 (1 : 2 : 4) mortar prepared with 1% solution of water-proof compound complete as per specification . 50mm thick. 47 filling of sunk portion of roof with earthen pots of required height including filling voids with 1:3:6 light concrete, using brick batscomplete levelling and dressing the surface by 50mm thick cement concrete 1:2:4 as per specification. 48 providing and laying water proofing treatment in sunken portion of wcs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (i) first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @0.253 kg//sqm .this layer will be allowed to air cure for 4 hours. (ii) second layer of slurryof cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm this layer will be allowed to air cure for4 hours followed by water curing for 48 hours. the rates includes preparation of surface treatment & sealing of all joints ,corners,junction with polymer mixed slurry. 49 providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with c.p. brass screws and wooden plugs, etc., wherever necessary complete: 20 mm 50 providing and fixingaluminum workfor doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate z sections and other sections of approved make conforming to is :733 and is :1285,fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required pvc/neoprene felt etc. aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle aluminium snap beading for glazing /paneling , c.p. brass/ stainless steel screws al. tower bolt & al. handle & al. aldrop etc.,all complete as per architectural drawings and thedirections of engineer- in – charge .(glazing and paneling to be paid for separately). for fixed portionpolyester powder coating aluminum( minimum thickness of powder coating 50 micron) 51 providing and fixing 12 mm thick prelaminated three layer medium density (exterior grade ) particle board grade i, type ii conforming to is : 12823 bonded formaldehyde synthetic resin ,of approved brand and manufacture in paneling fixed in aluminium doors ,windows shutters and partition frames with c.p. brass / stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge. pre-laminatedparticleboardwithdecorativelaminationononesideandbalancinglaminationonotherside. 52 providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with pvs / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(cost of aluminium snap beading shall be paid in basicitem.) with float glass panes of 5.0 mm thickness ( weight not less than 13.50 kg/sqm) 53 providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 54 providing and fixing sun control film, thickness of film 1 mil visible light transmittance 4-24% & solar energy transmittance 42-51% & total solar energy rejection 37-43%of approved colour and shade , complete in all respect , at all level , as directed by engineer- in -charge. 55 providing and fixing double action hydraulic floor spring of approved brand and manufacture is : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece m.s. 56 s&f fixed wire gauge of stainless steel of 14 mesh x 24 gauge to the aluminium window by aluminium beading 20x3mm with suitable screws not exceeding 150mm distance at all heights with all lead and lift with scafolding. 57 p & f indian type white glazed vitreous china 1st quality w.c. orissa pan (is :2556 mark) with 100 mm vitreous china p or s trap including cutting and making good the wall and floor:size 530x410mm. 58 p & f european type white glazed vitreous china 1st quality double syphonic w.c (is :2556 mark) with p or s trap including cutting and making good the wall and floor 59 p & f 15 mm. dia connection pipe of approved quality/make :600 mm dia 60 p & f kitchen & lab. sink of approved make with c.i. brackets duly painted, 40 mm c.p. waste coupling, c.p. brass chain with rubber plug, 40 mm g.i. waste pipe up-to floor level complete including cutting and making good the wall & floor : fire clay glazed kitchen sink (i.s 771-1985marked) size 600 x 450 x 250mm. 61 p & f full-way valve (is:778 mark) or wheel valve of approved make : 62 gun-metal 15mm nominal bore. 63 gun-metal 25mm nominal bore. 64 p & f looking mirrors with p.v.c. frame of approved (atul modi guard saint gobin or equivalent)size 500 x 400 mm 65 p & f towel rail or ring of approved quality/ make: 66 c.p. brass towel rail with brackets 600x 20 mm 67 c.p. brass towel ring revolving type 68 p & f grating of approved quality /makestainless steel sheet size 125 mm diaheavy quality of approved make 69 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes (is 15778 : 2007 code) having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. (concealed work including cutting chases and making good the walls etc.,) 70 15mm dia nominal bore 71 25mm dia nominal bore 72 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes (is 15778 : 2007 code) having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings, this included jointing of pipes & fittings with one step cpvc solvent cement , trenching refilling & testing of joints complete as per direction of engineer in charge.(external work). 73 15mm dia nominal bore 74 25mm dia nominal bore 75 p & f bib cock (is : 8931 mark), superior quality of approved make: c.p. brass bib cock, 15 mm nominal bore 76 p & f stop cock (is :8931 mark), superior quality & of approved make: c.p. brass 15 mm nominal bore. 77 p&f soap dish or tray of approved quality/ make. c.p. brass heavy and superior quality 78 p&f bath shower of approved quality/ make . c.p. brass of heavy & superior quality 150mm. 79 p & f inlet connection (angle valves) superior quality, of approved make, for wash basin, gyser etc. c.p. inlet connection 15 mm brass (is:8931 marked)with 60 cm long thread and nut. 80 p & f ball cock (is :1703 mark) with rod & p.v.c. ball complete : brass wt.400 gm,15mm. 81 p & f pvc storage tank (is : 12701marked indicating the bis license no), of approved make with cover, 25mm dia 1m long g.i. over-flow pipe & 25 cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 1000 litres capacity. 82 hoisting charges for each floor : 83 construction of manhole in all type of soil inner size 90 x 60 cm. 300 mm thick masonry in cm 1:6, 10 cm. thick cement concrete 1:5:10 in foundation, 20 mm thick inside plaster in cm 1:6, finished with floating neat cement, 50mm thick m-15 grade c.c. flooring, making channels, 80mm thick stone slab covering with 40mm thick m-15 grade c.c. flooring, cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. depth up to 0.5 m 84 construction of chamber in all type of soil with 300 mm thick masonry in cm 1:6 m,10 cm thick c.c. 1:5:10 in foundation, 20mm thick insider plaster in cm 1:6, finished with floating neat cement, 50mm thick m-15 grade c.c. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. size 450 x 450mm depth upto0.5 m cement cover with frame 85 construction of septic tank in all types of soil with 40 cm .thick masonry in cm 1:6, 15 cm thick c.c bed of 1:5:10, m-15 gradec.c floor &rcc slab covering with m15 grade c.c. floor,50 mm thick stone slab partition walls, 20 mm thick plaster in cm 1:6 finished with neat floating cement, 4 nos stone foot rests of approved design ,two no. 450 mm dia each ferro cementcover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:-size 400 x140x150 cm.(for 50 users)with 115 mm thick rcc (m-20) slab with tor steel reinforcement 10mm ? @15 cm c/c bothways including shuttering complete in all respect 86 construction of open surfacedrain with 112mm thick brick masonry in cm 1:4,110mm thick base concrete 1:5:10, 37mm thick m-15 grade c.c. flooring ,12mm 1:4 cement plaster on all exposed faces of walls including top surface excavation & disposal of earth complete as per approved design/drawing: 150mm drain,225mm av. depth 87 p&f rigid pvc pipe (is:4985 mark) class ii/ (4 kg. /cm2.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant. 88 75mm dia 89 110mm dia 90 160mm dia 91 p&f rigid pvc pipe fittings (is: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: 92 plain tee 110 mm 93 vent covel 75mm 94 plain floor trap 110mm dia 95 bend 87.5 - 75mm 96 bend 87.5 - 110mm 97 pipe clip- 110mm 98 coupler-110 mm dia 99 making connection of g.i. distribution branch with g.i. main including all fitting. beyond 25mm & upto 100mm dia 100 construction of soakage well in all type of soil with 300 mm thick dry masonry, top and bottom 300 mm course in cm 1:6, 80mm thick stone slab, jointing of slab in cm 1 : 3, ralthal, kharanja, 40 mm thick m-15 grade c.c flooring , earthwork complete as per approved drawing including disposal of earth within a lead of 50 mtr.: size 300 cm. dia outside & 300 cm. depth . 101 p & f water closet seat covers with brass hinges complete : solid pvc (is 2548 marked) grade-i black for ewc. 102 p & f low level flushing cistern of 10 litres capacity (is : 2556 mark) of approved make with complete fittings c.i. brackets duly painted, brass ball cock with ball (is: 1703 mark) complete including cutting and making good the wall: pvc withpvcbend and superior internal fittings as per is : 7231 . 103 p & f jet spray for water closet with c.p. copper tube flange of approved make. 104 p & f wvc wash basin (ist quality is:2556 mark) of approved make with c.i. brackets duly painted 1 no. 15 mm c.p. pillar cock (is:8934 mark) & 32 mm c.p. brass waste coupling of approved make, p.v.c waste pipe with pvc nut 32 mm complete including cutting & making good the wall : size 580 mm x 450 mm 105 p & f flush cock/flush valve (is:9758 mark) or wc of approved quality make : c.p. brass push type exposed 25 mm nominal bore. 106 brick work with f.p.s. bricks of class designation 75 in superstructure above plinth level upto floor v level in all shapes and sizes in :cement mortar 1 : 6 (1 cement : 6 coarse sand) 107 random rubble stone masonry with hard stone in superstructure aboveplinth level and upto five levelabove 30cm. thick walls in : 108 repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead with cement mortar 1 :4 ( 1 cement : 4 coarse sand) 109 patch repair to cement concrete floor including digging out old floor in regular shape and removal of rubbish curing etc. complete in all respects. 110 labour charges for repair to door / window without using any material such as applying randha (finishing) tightening of bolts & screw etc. 111 p & f inlet connection (angle valves) superior quality, of approved make, for wash basin, gyser etc. c.p. inlet connection 15mm.brass (is : 8931 marked) 112 p & f 15 mm. dia connection pipe of approved quality/make : cp brass pipe with cp brass nuts upto length 600mm. 113 providing & fixing premium quality white glazed vitreous china sanitary wares (is:2556 mark) of approved make as per direction of engineer-in-charge including cutting and making good the wall and floor. double syphonic european w.c. with mounted w.v.c. flushing cistern of 10 litre capacity complete with all necessary internal fittings with hydraulic seat cover. 114 p & f indian type white glazed vitreous china 1st quality w.c. orissa pan (is :2556 mark) with 100 mm vitreous china p or s trap including cutting and making good the wall and floor: size 580x440mm. 115 providing and fixing t-iron frames for doors, windows and ventilators of mild steel tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 116 providing and fixing fully panelled/partly panelled/double leaf shutter frames for doors as per approved design and drawings with approved ordinary c.p./ oxidised steel fittings as per annexure - a and width of styles & top rails of 100mm and lock rails width of 150mm and bottom rails of 200mm width including teak wood beading of size 19mm x 12mm on both faces complete : 35 mm thick nigeria wood grade i 117 providing and applying white cement based puttyover plastered surface to prepare the surface even and smooth completeold plastered surface (two or more coats) 118 wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding:old work (one or more coats ) two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect.old work (one or more coats ) 119 painting exterior surface ofwallwith 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty,etc complete in all respect including scaffolding and safety provision old work 120 providing & laying broken glazed titles on roof ( broken glazed tilesnot less than 9 kg/sqm) on top of hot bitumen @ 1.7 kg/sqm. (1.40 kg ofvg-40 (30/40 )grade and 0.30 kg/sqm. ofvg-10 (80/100) grade) and joints filled with cement mortar 1 :2 (1 cement:2 marble dust mixed with water proofing compund all complete as per direction of engineer-in-charge. 121 supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. 122 providing and fixing 1st quality mat finished ceremic tile size 300x300mm confirmingto is : 13755 and is : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). 123 providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 gauge thickness, joint mitred weldedand grinded including hold fast of steel lugs 13mm x 3mm and 15 cm long embedded in c cblock 15 x 10 x 10 cm of 1:3:6 nominal concrete and including fixing of pivoted hinges of superior quality, window shutters made out of 50 x 25.0 mm hollow steel section 15 mm paitam of 18 gauge thickness, joint mitred and grinded including 10mm x 10mm square bars welded to framefor paitam fixing float glass 4mm thickpanes with glazing clips and metal sash putty andfixing of shutters frames peg stay, u shape handle 100 mm long, tower bolts 100 mm long of steel powder coated superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respect as per direction of engineer-in –charge window openable. 124 providing and fixing concertina coil fencing with required dia 610 mm (having 15 nos. round per 6 metre length) up to 3m height of wall with existing angle iron y shaped placed 2.4 m or 3.00 m apart and with 9 horizontal r.b.t. stud tied with gi staples and gi clips to retain horizontal including necessary bolts or gi barbed wire tied to angle iron all complete as per direction of engineer in charge with reinforced barbed tape (r.b.t.)/spring core(2.5 mm thick) wire of high tensile strength of 165 kg/sq.mm with tape (0.52 mm thick) and weight 43.478 gm/metre (cost of ms angle, cc block shall be paid extra) 125 renewing glass panes,with putty and nails wherever necessary float glass panes of thickness 4 mm 126 providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 40mm nominal size). 127 kota stone slab flooring 25 mm thick over 20 mm (average) thickbase laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completewith base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm 128 earth work in excavation by mechanical means (hydraulic excavator ) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed : all kinds of soil

State Government

TRN :49019699 | 14 May, 2025

Tender Value : 3.82 Lacs

Lucknow - Uttar Pradesh

Tender for tender for work of supply and installation of open gym equipment in park main area of ??gomti nagar extension scheme sector-1 park view apartment - chest pressdimensions: product area :3.6 ft x 2.8 ft safe play area :7.6 ft x 6.8 ftfunctions: strengthens glutes, chest, shoulder,upper & mid abs, fore arm & tricepstechnical specifications:center frame : 100 nb gi c-class pipe-jindal makemain frame : 40 nb & 32 nb gi b-class pipe -jindal makehandle frame : 32 nb & 25 nb gi b-class pipe -jindalmakeconnecting pipe : 32 nb & 25 nb & 40 nb gi b-class pipe -jindal makeseat & back rest: lldp rotomoulded seat with inbuiltbolts 3/8 x 1.5.pipe cap: galvanised cap.bearing systems: self locking bearing systems. itwill restrict its movement in 120° angle.bearing housing and pin :seamless pipe & round barbearings : reputed make (fag/skf)nut bolts: galvanised nut boltsnut bolts cap: nylon 66 injection moulded with ss m6fastners.powder coat: done by first coat of primerbrand 40-50 micron thickness and top coat of purepolyester powder with 70- 80 micron thickness. totalthickness is 110-120 micron complete in all respect as directed by engineer-in-charge 3 cycledimension:product area : 3.2 ft x 2.2 ftsafe play area :7.2 ft x 6.2 ftfunctions: strengthen upper & lower limb,improves body consistency & egibility, improvelungs & heart efficiency and strengthens heart.technical specifications:main frame : 25 nb & 40 nb gi b-class pipe -jindal makeseat frame : 32 nb gi b-class pipe -jindal makehandle & seat: lldpe stering is usedpipe cap: galvanised cap.bearing housing and pin :seamless pipe & round barnut bolts: galvanised nut bolts.bearings : permanent sealed of reputed make (fag/skf)powder coat: done by first coat of primerbrand 40-50 micron thickness and top coat of purepolyester powder with 70- 80 micron thickness. totalthickness is 110-120 micron complete in all respect as directed by engineer-in-charge. 4 pull up stationdimensions:product area : 4 ft x 3.4 ftsafe play area : 8 ft x 7.4 ftfunctions: strengthen abdominal and upper thighalso improves reflexes and mind bodyinteraction.technical specifications:main frame: 100 nb c-class g.i. pipes. -jindal makeback rest: detachable with 25nb gi b-class with specialcasing-jindal makehandle: 25 nb gi b-class pipe. -jindal makeconnecting main horizontal pipe: 50 n b gi b-classpipe -jindal makeintermidiate pipe: 25 nb gi b-class pipe. -jindal makepipe end cap: galvanised cap.powder coat: done by first coat of primerbrand 40-50 micron thickness and top coat of purepolyester powder with 70- 80 micron thickness. totalthickness is 110-120 micron complete in all respect as directed by engineer-in-charge. 5 air walkerdimensions:product area :4.8 ft x 2.1ftsafe play area :8.8ft x 6.1ftfunction: strengthens leg muscles, improvescardio vascular endurancetechnical specifications:main frame: 100 nb gi c-class pipe-jindal makeleg frame: 32 nb gi b-class pipe-jindal makehandle frame: 25 nb gi b-class pipe –jindal makefoot rest: lldp rotomoulded seat with inbuilt bolts3/8 x 1.5.pipe end cap: galvanised cap.bearing housing and pin: seamless pipe & round barbearing systems: self locking bearing systems. itwill restrict its movement in 120° angle.nut bolts: galvanised nut bolts.bearings: permanent sealed of reputed make (fag/skf)powder coat: done by first coat of primerbrand 40-50 micron thickness and top coat of purepolyester powder with 70- 80 micron thickness. totalthickness is 110-120 micron complete in all respect as directed by engineer-in-charge. 6 twister three waydimensions:product area : daimeter 5.5 ftsafe play area : diameter 11 ftfunctions: strengthens abdominal muscletechnical specifications:main frame : 100 nb gi c-class pipe -jindal makehandle frame: 20 nb gi b-class pipe jindal maketwister disc: lldp rotomoulded seat with inbuilt bolts3/8 x 1.5.pipe cap: galvanised cap.bearing cap: nylon 66 injection moulded.bearing housing and pin: seamless pipe & round barnut bolts cap: nylon 66 injection moulded with ss m6fastners.bearings: permanent sealed of reputed make (fag/skf)nut bolts: galvanised nut bolts.powder coat: done by first coat of primerbrad 40-50 micron thickness and top coat of purepolyester powder with 70- 80 micron thickness. totalthickness is 110-120 micron complete in all respect as directed by engineer-in-charge. 7 parallel bar doubledimensions:product area : 7 ft x 2 ftsafe play area : 13 ft x 4 ftfunctions: strengthens arms and shouldermusclestechnical specifications:parallel bar: 25nb gi pipe b-class isi markclamps : nylon 66 injection moulded casingcentre pipe: 100 nb gi c-class pipe jindal makepipe cap: galvanised cap.bearing cap: nylon 66 injection moulded.bearing housing and pin: seamless pipe & round barbearings : reputed make (fag/skf)stopper: pu rod 50mm dianut bolts: galvanised nut bolts.powder coat: done by first coat of primerbrad 40-50 micron thickness and top coat of purepolyester powder with 70- 80 micron thickness. totalthickness is 110-120 micron complete in all respect as directed by engineer-in-charge. 8 rowerdimensions:product area : 4.7 ft x 2.5 ftsafe play area : 8.7 ft x 6.5 ftfunctions: strengthens back muscles, shoulderarm muscles and abdomen, also improves cardiovascular endurance.technical specifications:main frame: 80 nb gi b-class pipe jindal makeseat frame:50 nb gi b-class pipe -jindal makehandle frame:32 nb gi b-class pipe -jindal makepipe cap: galvanised cap.bearing cap: nylon 66 injection moulded.bearing systems: self locking bearing systems. itwill restrict its movement in 120° anglebearing housing and pin: seamless pipe & round barnut bolts: galvanised nut boltsbearings:permanent sealed of reputed make (fag/skf)powder coat: done by first coat of primer brand 40-50 micron thickness and top coat of purepolyester powder with 70- 80 micron thickness. totalthickness is 110-120 micron complete in all respect as directed by engineer-in-charge. 9 tai chi spinnerdimensions:product area : 3.3 ft x 2.5 ftsafe play area : 7.3 ft x 6.5 ftfunctions: improves shoulder & helps improveswrist aligilitytechnical specifications:main frame: 100 nb gi c-class pipe -jindal makehandle frame: 32 nb gi b-class pipe -jindal makespinning ring: lldp rotomoulding wheel.pipe cap: galvanised cap.bearing cap: nylon 66 injection moulded.bearing housing and pin:seamless pipe & round barnut bolts: galvanised nut boltsnut bolts cap: nylon 66 injection moulded with ss m6fastners.bearings: permanent sealed of reputed make (fag/skf)nut bolts: galvanised nut bolts.powder coat: done by first coat of primerbrad 40-50 micron thickness and top coat of purepolyester powder with 70- 80 micron thickness. totalthickness is 110-120 micron complete in all respect as directed by engineer-in-charge. 10 abb trainerdimensions:product area : 5.7 ft x 2.1 ftsafe play area :9.7 ft x 6.1 ftfunctions: strengthen abdominal muscles andprevent lower back straintechnical specifications:• main frame is made up of 40 nb & 32 nb gi b classpipe• stiffener is made up of 25 nb gi b class pipe.• foot lock is made up 50 nb gi b class pipe• abb trainer top is made up of lldpe plastic• size of top will be 375 mm x 1150 mm x 40 mmthick complete in all respect as directed by engineer-in-charge. 11 (part-b) 12 1st year is defective liability period. 13 operation and maintanance of part-a 2nd year (2.5 % on part-a) 14 operation and maintanance of part-a 3rd year (3 % on part-a) 15 operation and maintanance of part-a 4th year (3.5 % on part-a) 16 operation and maintanance of part-a 4th year (4 % on part-a)

State Government

TRN :49020391 | 20 Jun, 2025

Tender Value : 0

Panaji - Goa

Tender for tender for expression of interest tender for national games sports equipment on rental basis-aquatics sports equipment 2 osb 9 starting platform equipped with false start detection system and early start detecting device with no springing effect having a non slip surface of 0.5 x 0.5 meter backstroke hand grip at 0.6 above water level with complete mounting material ready to use confirming to fina , sfi regulations of make anti / mryta 3 floating goal post as per fina specification of make malmsten / anti 4 anti-wave lanes 50 mts long of make anti / mryt 5 backstroke ledge for start of make finis 6 ball cage for 10 balls of make indian 7 ball releasing mechanism of make indian 8 athletics sports equipment 9 assorted rake (with 1.50m handle) (60cm x 20cm) of make nelco 10 cross bar stands (high jump) to hold 6 cross bars of make nelco 11 cross bar stands (pole vault) to hold 6 cross bars of make nelco 12 cutting player of make indigeneous 13 discus 1 kg steel or brass rim for competition (wa approved) minimum 3 brands of make nelco 14 discus 2 kg steel or brass rim for competition (wa approved) minimum 3 brands of make nelco 15 discus stand (20 discus in one stand) of make nelco 16 folding stool (umpires & lap scorers) of make standard 17 hammer 4.00 kg dia turned brass / iron / alloy for competition (wa approved) minimum 3 brands of make nelco 18 hammer 500 gm ms (for fixing nails) of make standard 19 hammer 7.260 kg dia turned brass/ iron/ alloy for competition (wa approved) minimum 3 brands of make nelco 20 hammer cage with door & net (as per wa rule) of make nelco 21 hammer extra wire and handle - men (wa approved) of make nelco 22 hammer extra wire and handle - women (wa approved) of make nelco 23 hammer stand (12 hammers in one stand) of make nelco 24 high jump fiber cross bar (4m) (wa approved) of make nelco 25 high jump height measuring rod - 0.00m to 2.50mof make nelco 26 high jump landing mattress with cover 6m x 4m x 0.70m of make nelco 27 high jump uprights aluminium telescopic of make nelco 28 hurdles - steeple chase including water jump 1 set (wa approved) of make nelco 29 hurdles automatic aluminium - competition (wa approved)of make ate 30 hurdles carrying trolly (20 hurdles in 1 trolly) of make standard 31 javelin 600 gm. 40m range for competition (wa approved) minimum 2 brandsof make nelco/ate 32 javelin 600 gm. 50m range for competition (wa approved) minimum 2 brandsof make nelco/ate 33 javelin 600 gm. 60m range for competition (wa approved) minimum 2 brands of make nelco/ate 34 javelin 600 gm. 70m range for competition (wa approved) minimum 2 brandsof make nelco/ate 35 javelin 600 gm. non range for competition (wa approved) minimum 2 brandsof make nelco/ate 36 javelin 800 gm. 60 m range for competition (wa approved) minimum 2 brandsof make nelco/ate 37 javelin 800 gm. 70 m range for competition (wa approved) minimum 2 brandsof make nelco/ate 38 javelin 800 gm. 80 m range forcompetition (wa approved) minimum 2 brandsof make nelco/ate 39 javelin 800 gm. 90 m range for competition (wa approved)minimum 2 brands of make nelco/ate 40 javelin 800 gm. non range for competition (wa approved) minimum 2 brandsof make nelco/ate 41 javelin stand (20 javelins in one stand) of make nelco 42 jumping mattress trolly 5m x 3m of make nelco 43 ladder for hammer retriving of make standard 44 pole rack (to hold 10 poles) of make nelco 45 pole vault box of make nelco 46 pole vault crow bar (bar lifter)4.0m long aliminium (telescopic) of make nelco 47 pole vault elastic cross bar of make nelco 48 pole vault fiber cross bar - 4.5m (wa approved) of make nelco 49 pole vault height measuring rod (0.00m to 5.50m) of make nelco 50 pole vault landing mattress (wa approved) of make nelco 51 pole vault uprights (wa approved) with base pair sets of make nelco 52 relay baton different colours with number 1 to 8 aluminium of make nelco 53 shot 4 kg of different dia from 95mm, 100mm, 105mm, 109mm and 110 mm for competition (tuned iron & alloy) minimum 2 brands wa approved of make nelco/ate 54 shot 7.260 kg different dia from 110mm, 115mm, 120mm, 125mm, 129mm, 130mm for competition (turned iron & alloy) minimum 2 brands wa approved of make nelco/ate 55 shot return channel 20m long of make nelco 56 shot stand (20 shots in stand) of make nelco 57 stand with bowl (mgco2/ gym chalk) of make nelco 58 starters stand of make nelco 59 starting blocks combatable with start information syatem wa approved of make nelco 60 starting blocks trolley (10 blocks in one trolly) of make nelco 61 concentric circle of make nelco 62 badminton sports equipment 63 hova courts of make yonex 64 umpire chair of make sanrit 65 basketball sports equipment 66 basketball trolley(to accommodate 15 balls) of make cosco 67 basketball trolley(to accommodate 8 balls) of make cosco 68 billiards & snooker sports equipment 69 sharma s1 snooker tables (12 x 6) with steel cushion long rest half rest spider rest goose neck rest cue extension chalk cues table cover iron ball spotter ball rack table brushes corner brusher of make sharma 70 boxing sports equipment 71 boxing ring (aibaapporved) of make greenhill 72 canoeing & kayaking sports equipment 73 kayak paddle 100% carbon graphite fiber available in ultra-light and stiff variant adjustable clamp on shaft with lock and unlock facility adjustable to 5 cm with a left and right angle protractor icf and ikca approvedof make braca iv 74 canoe paddle 100% carbon graphite fiber available in ultra-light and stiff variant adjustable clamp on shaft with lock and unlock facility adjustable to 5 cm with a left and right angle protractor icf and ikca approved of make braca iv 75 kayak ergometer length: 2.50 m - 3.10 m width: 0.40 m - 0.70 m height: 0.40 m - 0.70 m weight: 40 kg (approximate) povides easily readable, relevant numeric / graphic information to the athlete while training on the ergometer its display shows following updates: paddling time distance speed / power stroke rate / water-air ratio / max heart rate (requires serial interface to polar chest ribbon or similar) average speed / power graphic left / right power balance pacer icf and ikca approved of make dansprint aps 76 canoe ergometer length: 3.10 m - 3.30 m width: 0.40 m - 0.52 m height: 0.60 m - 0.70 m weight: 40 kg (approximate) povides easily readable, relevant numeric / graphic information to the athlete while training on the ergometer its display shows following updates: paddling time distance speed / power stroke rate / water-air ratio / max heart rate (requires serial interface to polar chest ribbon or similar) average speed / power graphic left / right power balance pacer icf and ikca approved of make dansprint aps 77 interval 2000 split / rate watch - stop watch included in the packages: - cr2032 batteries (2) - interval 2000 - interval protective bumper - lanyard memory: 2000 splits, best and average split, 600+ segments identified by date and time, stroke rate w/time unit weight: 2.2 oz (66.369 kg) display dimensions: 1.625 x 1.25 in buoyancy: floats (note: control unit with bumper and lanyard floats) display: high-contrast monochrome lcd backlight: blue/green electroluminescent backlight, auto-on controls: 5 buttons (3 side, 2 front), tactile and audible response. battery type: 2 cr2032 (1 display, 1 backlight) battery life expectancy: 300+ hours case: injection-molded polymer case, acrylic lensof make nielsen & kellerman 78 canoe knee pad made from lightweight and durable closed mini-cell foam that can be shaped for a custom fit and superior comfort icf and ikca approved of make braca iv 79 seats k1 icf and ikca approved of make nelo 80 seats k2 icf and ikca approved of make nelo 81 seats k4 icf and ikca approved of make nelo 82 foot rest k1 icf and ikca approved of make nelo 83 foot rest k2 icf and ikca approved of make nelo 84 foot rest k4 icf and ikca approved of make nelo 85 spare rudder k1 icf and ikca approved of make nelo 86 spare rudder k2 icf and ikca approved of make nelo 87 spare rudder k4 icf and ikca approved of make nelo 88 stop watch electronic with 100 memories included in the packages: - cr2032 batteries (2) - interval 2000 - interval protective bumper - lanyard memory: 2000 splits, best and average split, 600+ segments identified by date and time, stroke rate w/time unit weight: 2.2 oz (66.369 kg) display dimensions: 1.625 x 1.25 in buoyancy: floats (note: control unit with bumper and lanyard floats) display: high-contrast monochrome lcd backlight: blue/green electroluminescent backlight, auto-on controls: 5 buttons (3 side, 2 front), tactile and audible response. battery type: 2 cr2032 (1 display, 1 backlight) battery life expectancy: 300+ hours case: injection-molded polymer case, acrylic lens of make nielsen & kellerman 89 rope garware (in meter) of make nelo 90 balls (big size) of make nelo 91 life jackets ultra low olympic gold medal cut clever figure-hugging shoulder straps integrated side straps 50-70n of gaia environmentally friendly soft foam size available xs (weight: 30-50 kg) sm (weight: 45-70 kg) lxl (weight: 65-90 kg) xxl (weight: 85-110 kg) fl/xl (weight: 60-90 kg) icf and ikca approved of make hiko sports 92 slalom paddles 100% carbon, aluminium & titanium reinforced tips with adjustable shaft upto 5cm of make braca iv 93 spray deck canoe slalom blind stitched and latex sealed seams throughout. 10/11 mm shockcord style deck. 4/5 mm tough faced neoprene with silicone printed reinforcing on top. no seams in the deck section icf and ikca approved of make hiko sports 94 spray deck kayak slalom blind stitched and latex sealed seams throughout. 10/11 mm shockcord style deck. 4/5 mm tough faced neoprene with silicone printed reinforcing on top. no seams in the deck section icf and ikca approved of make hiko sports 95 helmet canoe slalom ultra lightweight competition helmet ideal for whitewater kayak / canoe racing, surf lifesaving, freestyle kayaking and rafting. construction material high impact ralvek thermoplastic for a stiffer, safer shell. the interior is a top grade closed cell eva foam liner. detachable fit pads give you a super comfortable custom fit without abosrbing moisture. low profile shell design foam vent inserts for cold water paddling interior impact liner is a low profileshell design, closed- cell waterproof eva foam weight 500 gms ce-1385 certified and icf approved for international and olympic layak / canoe racing icf and ikca approved of make hiko sports 96 life jackets canoe slalom ultra low olympic gold medal cut clever figure-hugging shoulder straps integrated side straps 50-70n of gaia environmentally friendly soft foam size available xs (weight: 30-50 kg) sm (weight: 45-70 kg) lxl (weight: 65-90 kg) xxl (weight: 85-110 kg) fl/xl (weight: 60-90 kg) icf and ikca approved of make hiko sports 97 jetties for canoe sprint material: high density polyethylene (hdpe), marlex hdpe 50100 / qtr 571 cube dimensions: 500mm x 500mm x 400mm higher holding strength - corrugated design sides to interlock cubes together for higher pressure resistance and strength in water & provision to pass cables or pipes under the cover top cover: separate cover made of marlex hdpe 50100 / qtr 571 with 20mm thick and antiskid design for extra strength & prevent wear & tear lug thickness: 22mm (+-5%)to ensure sufficient strength min. weight of cube with cover 8.5 kgs/cube (+-5%) buoyancy: 360 kgs/sq. mtr flat floor, floor stiffening with painted grip accessories and connectors: made of same hdpe material to avoid any frictional damages complete accessories, short pin, short screw & nuts, cleat, washer, required for constructing floating surface including rope ua radiation proof buoyancy test report qb 1557-1992 diagonal tensile strength test report gb/t 1040.1-2006 compressive strength test: gb/t 8813-2008 supply, installation and handover of project at site hdpe side railing, height 1000mm icf and ikca approved of make indigeous 98 k2 (not more than 18kg) 100% carbon composite construction with no added aramid fiber or glass fiber length: 650 cm weight: not more than18kg icf and ikca approved of make nelo 99 k4 (not more than 30kg) 100% carbon composite construction with no added aramid fiber or glass fiber length: 1100 cm weight: not more than30kg icf and ikca approved of make nelo 100 c1 (not more than 14kg) 100% carbon composite construction with no added aramid fiber or glass fiber length: 520 cm weight: not more than14kg icf and ikca approved of make nelo 101 c2 (not more than 20kg) 100% carbon composite construction with no added aramid fiber or glass fiber length: 650 cm weight: not more than20kg icf and ikca approved of make nelo 102 c4 (not more than 30kg) 100% carbon composite construction with no added aramid fiber or glass fiber length: 900 cm weight: not more than30kg icf and ikca approved of make nelo 103 judo sports equipment 104 judo mats for competition and warm up area (tatami) of make taishan 105 kabaddi sports equipment 106 synthetic kabaddi mats thickness 35-40 mm - total 1500 pieces for 4 courts (2 court for practice and 2 for fop) of make indigeous 107 kho kho sports equipment 108 kho-kho mats (30m x 20m) size:1m x1m . density:30 mm (approved/preferred by kfi) of make gravolite 109 kho-kho poles-sheesham ( height:120-125cms above the ground & 40-50cms below the ground, wooden circumference:9-10 cms at the top & 28.25-31.4 cm at bottom.) colour:white of make shiv naresh 110 mallakhamb sports equipment 111 pole mallakhamb for competition & warm up area above the ground 2600 to 2800 mm, under the ground 800 to 900 mm, neck 180 to 200 mm, top - 70 mm, total length 3400 - 3700 mm, circumference: bottom - 530-550 mm, below the neck 300 to 350 mm, neck 180 to 200 mm, top 350 mmof make kepl khalsa 112 hanging mallakhamb for competition & warm up area height 1700 to 1900 mm, neck height 180 to 200 mm, top height - 70 mm, distance b/w bottom and ground 650-700 mm, circumference: bottom 450 to 500 mm, neck 180 to 200 mm, below the neck 250 to 300 mmof make kepl khalsa 113 structure of hanging mallakhamb for competition & warm up area height of structure/stand - 4600 to 4800 mm, width - 12 feetof make kepl khalsa 114 structure of rope mallakhamb for competition & warm up area height of structure/stand - 5800 to 6000 mm, width - 12 feetof make kepl khalsa 115 powder stand 3 feet with steel tubeof make kepl khalsa 116 rubber foam mattresses for competition and warm up area length - 2 m, width - 1 m, thickness - 6 cm to 10 cmof make kepl khalsa 117 portable mallakhamb above the ground 2600 to 2800 mm, neck 200 mm, top - 70 mm, total length 3400 - 3700 mm, circumference: bottom - 530-550 mm, below the neck 300 to 350 mm, neck 180 to 200 mm, top 350 mmof make kepl khalsa 118 modern pentathlon 119 uipm laser pistols (shooting) (model - pp320exp laser pistol set)of make ecoaims 120 uipm laser target (shooting) (model - lt600 laser hit / miss target) of make ecoaims 121 fencing piste of make absolute fencing 122 fencing apparatus of make absolute fencing 123 pencak silat sports equipment 124 arena mattress (5 cm)(1 set of 92 green, 2 yellow, 3 red, 3 blue)of make indigenous 125 roll ball sports equipment 126 goalpost (size & design as per irbf guidelines) of make indigenous 127 rowing sports equipment 128 single scull boat imported (coastal boats) of make swift racing 129 double scull boat imported (coastal boats) of make swift racing 130 4 seat catamaran importedof make swift racing 131 catamaran obm 4 stroke 25hp of make rowing solutions 132 rugby sports equipment 133 rugby specific goal posts (set of 2 goal posts) 6 inch diameter, 20m height x 4 poles & 4 inch diameter, 6m height x 2 poles of make scrum 134 sqay martial arts sports equipment 135 arena of size 10 x 10 women (sqay arena mats) yellow & purple colour mats (total 100 pieces) of make haily 136 arena of size 12 x 12 men (sqay arena mats) yellow & purple colour mats (total 144 pieces)of make haily 137 table tennis sports equipment 138 table tennis tables - show court- black of make cosco 139 umpires tables of make cosco 140 taekwondo sports equipment 141 taekwondo mats (red & blue colour, 1m x 1m x 24mm thick, daedo or kwon or any wt approved mats) of make indigeous 142 weightlifting sports equipment 143 men bar with collar (warm up & training area) of make eleiko 144 women bar with collar (warm up & training area)of make eleiko 145 discs & plates (fop main stage) (1 set disc & plates in fop (main stage) will consist of 25 kg x 4, 20 kg x 2, 15 kg x 2, 10 kg x 2, 5 kg x 2, 2.5 kg x 2, 2 kg x 2, 1.5 kg x 2, 1 kg x 2, 0.5 kg x 2) of make eleiko 146 discs & plates (warm up & training area) (16 sets disc & plates inwarmup & training area will consist of 25 kg x 2, 20 kg x 2, 15 kg x 2, 10 kg x 2, 5 kg x 2, 2.5 kg x 2, 2 kg x 2, 1.5 kg x 2, 1 kg x 2, 0.5 kg x 2)of make eleiko 147 discs racks (warm up & training area)of make eleiko 148 powder standof make eleiko 149 resin trayof make eleiko 150 warmup & training platform(3 mts. x 3mts.)of make eleiko 151 wrestling sports equipment 152 wrestling mats of make taishan 153 wushu sports equipment 154 taolu arena of make taishan 155 for warm up area - kabaddi mats thickness 35mm,1m x 1m of make rxn 156 sanda arena of make taishan 157 for warm up area - judo mats thickness 40mm, 2m x 1m of make rxn 158 yachting sports equipment 159 rescue boats 4.5 meter rib (rigid inflatable boat), with 2000mm beam, 350mm draft (including appendages), 450mm dia. hypalon coated fabric collars of 1500gsm, 1670dtex material, with 5 airtight compartments, fitted with 40hp 4-stroke obm with manual tiller steering handle and capacity of 6 people. fuel capacity of 2 external tanks of 23-liter capacity each per boat cruising speed of 16 to 18 knots. the boat should be unsinkable when flooded and fully loaded and highly maneuverable, suiting rescue operations in seas.boat to be supplied with irs class certificate. accessories to be provided: 1no. boat repair kit, anchor with rope, 2 paddles, 1 set lifting slings. 1 bollard and 2 fairleads of make chougule fiberglass 160 jury boat 4700 mm long rib (rigid inflatable boat) with fiberglass hull, breadth of 2000mm, max draft of 450mm (including appendages), with 460mm dia. hypalon coated fabric of 1500gsm, 1670dtex, having 5 nos.foam-filled compartments, with single 60 hp 4-stroke obm fitted with remote control and steering system on a center console unit. fuel capacity of 2 external tanks of 23-liter capacity each per boat. cursing speed of 18-20 knot and a capacity of 6-8 people. the boat should be unsinkable when flooded and fully loaded and highly maneuverable.boat to be supplied with irs class certification. accessories to be provided: 1no. boat repair kit, anchor with rope, 2 paddles, 1 set lifting slings. 1 bollard and 2 fairleads of make chougule fiberglass

Related Searched Keywords : ring main system

List of ring-main-system Tenders

Get ring main system Tender Alert...

Related Searched Keywords : ring main system

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us