Filters

List of structural-steel Tenders

List of latest structural-steel Tenders in Indian Tenders. Click on any structural-steel Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for structural-steel Tenders.

All-Tenders (22)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :34852454 | 29 Aug, 2025

Tender Value : 0

Kharagpur - West Bengal

Tender for supply of round steel structural standard quality 12 mm. dia. in length 5.5 mtrs. to 13.5 mtrs. material and specification : is:2062:2011rev.7, amend. no.1 of nov. 2012, grade: e250 a..

Central Government/Public Sector

TRN :34833794 | 24 Jul, 2025

Tender Value : 0

Bardhaman - West Bengal

Tender for gem bids for custom bid for services - 1 structural repair of converterand associated mechanical equipments, 2 replacement oftrunion pins of hot metal ladles and steel teeming ladles, 3 convertor lamella plate replacement and shell protectionand radiation p..

State Government

TRN :34840939 | 04 Aug, 2025

Tender Value : 5.00 Lacs

Sunder Nagar - Himachal Pradesh

Tender for gem bids for structural, ms angle 40x40x5 mm, ms tee 40x25x3 mm, ms channel75x40 mm ismc, ms angle 25x25x3 mm, ms flat 50x6mm, steel reinforcement bars 8 mm diameter, steelreinforcement bars 10 mm diameter

Central Government And Public Sector

TRN :34822110 | 29 Jul, 2025

Tender Value : 12.29 Crore

Tirunelvelli - Tamil Nadu

Tender for supply, installation, testing and commissioning of independent air conditioner units and associated ventilation ducting, structural supports, copper tubing and carbon steel piping, communication and power cabling, anti corrosive painting, supply, installation, testing and commissioning of independent air conditioner units

Central Government/Public Sector

TRN :34830952 | 29 Jul, 2025

Tender Value : 0

Ernakulam - Kerala

Tender for replacement of steel structural, truss, pipe racks, supports etc. in phosphate plants and other area under sr.mmm p and w

State Government

TRN :34791189 | 28 Jul, 2025

Tender Value : 71.00 Lacs

Dhenkanal - Orissa

Tender for gem bids for sitc,supply, installation, testing, commissioning crs radio station transmitter of 50 w fm set sitc ofself supported transmission tower vhftransmitting antenna low loss feeder cable with nconnector studio monitor speaker on air broadcastconsole etc dynamic cardioid microphone portable solidstate field recorder headphones broadcast audioprocessor dummy load with connector extra lighteningprotection circuit 19 equipment rack ht 5 ft mtsequivalent work station with antivirus for 3 years audioediting software automation scheduling software licence condensor microphone with wind filter and arm stand audio distribution amplifier headphone distributionamplifier 10 kva online ups xlr 6 microphone junctionbox professional audio line cable professionalmicrophone cable xlr connecter male and female trsstereo connecter professional on air studio light digitalclock with time supply and fixing of work station table supply and fixing of vob table supply and fixing ofdiscussion table l shape supply and fixing of on air tableand side table supply and fixing of shoe rack supply oflow frequency acoustic treatment supply of acoustictreatment teak board skirting supply of observationwindow supply of observation window2 supply of soundproof door with frame chaukhatt supply of executivechairs revolving standard supply of visitor chairsrevolving standard tv 56 inch standard led type ipspanel sitc of vrv vrf 100 hp odu sitc of cassetteeunit 10hp sitc of cassettee unit 15hp sitc of cassetteeunit 20hp sitc of remot supply installation testing andcommissioning of y joints supply and fixing of refrigentcopper pipe with insullation supply and fixing of refrigentconduit pipe 25mm pvc internet works sitc of optic fibrecable 6 core sm sitc of patch cord ofc - 3 meter sc-lc bid number gem2025b6424273 dated 07-07-2025 bid document1 87 0 0 sitc of pigtail ofc - 1 meter, sitc of cat-6a cable, sitc of19 inch 6 u rack, sitc of lan system, sitc of liu 12 port, sitc of patch cord cat-6 -1 meter, sitc of patch cord cat-6-2 meter, sitc of patch cord cat-6 -10 meter, sitc of hdpepipe, supplying and fixing io box alongwith base and coverplate, sitc of cctv camera with night vision - 5 mp, supply and fixing of cat-6 wire in pvc conduit, sitc ofcctv camera, fire work sitc talk back slave station, sitcsmoke detector with built in led, sitc 6 kg powder typefire extinguishers, citc 2 kg powder type fire extinguishers, sitc addressable manual call point complete as required., civil works as per boq, cement work as pe boq, providingand laying in position cement concrete of specified grade, double charge vitrified tiles, centering and shuttering, steel reinforcement for r.c.c. work, smooth finishing of theexposed surface of r.c.c. work, brick work with commonburnt clay, 12 mm cement plaster of mix, partition uptoceiling height, cement fiber board, frames of doors, windows, clerestory windows, isi marked flush doorshutters, universal hydraulic door closer, structural steelwork, polishing in high gloss matt finish melamine, brightfinished brass hanging type floor door stopper, false ceilingwith cove and design at all height, removing dry or oilbound distemper, water proofing cement paint, providingand applying white cement based putty, wall painting withacrylic emulsion paint, 2mm thick pvc mat finished on floorof approved design, ac duct made of wooden batten, sitcof vertical blinds, electrical works, wiring for light point etc, wiring for circuit, supplying and fixing following modularswitch etc, supplying and fixing following modular switchsocket, supplying and fixing following modular switchs, supplying and fixing modules, supplying and fixingfollowing way, supplying and fixing miniature circuitbreaker, miniature circuit breaker suitable for inductiveload, supplying and fixing single pole blanking plate, supplying and fixing of following sizes of medium class pvcconduit, supplying and fixing suitable size gi box wihmodular plate, frls pvc insulated copper conductor, frlspvc insulated copper conductor 2, frls pvc insulatedcopper conductor3, frls pvc insulated copper conductor, 4, 3x2.5 mm flexible wire for connection, wiring for groupcontrolled, led 2x2 luminaire 36w, recess mounted leddownlighter, wall fan with brush less direct current bldcmotor, electrical earthingsitc crs radio station transmitter of 50 w fm set, sitc ofself supported transmission tower, vhftransmitting antenna, low loss feeder cable with nconnector, studio monitor speaker, on-air broadcastconsole/mixer with inbuilt phone in unit and usb, dynamiccardioid microphone, portable solid state field recorder, headphones, broadcast audio processor, dummy loadwith connector, extra lightening protection circuit, 19equipment rack ht. 5 ft, mts/equivalent, work station withantivirus for 3 years, audio editing software, automation/scheduling software licence, condensormicrophone with wind filter and arm stand, audiodistribution amplifier, headphone distribution amplifier, 10 kva online ups with 30 minutes back up online isocertified, xlr 6 microphone junction box, professionalaudio/line cable, professional microphone cable, xlrconnecter male and female, trs stereo connecter, professional on air studio light, digital clock with time, supply and fixing of work station table, supply and fixing ofvob table, supply and fixing of discussion table l shape, supply and fixing of on air table and side table, supply //bid details2 / 87

Central Government And Public Sector

TRN :34796446 | 21 Jul, 2025

Tender Value : 0

Barmer - Rajasthan

Tender for gem bids for partition, glass partition work, supplying, transporting, storing, fabricating and erecting -structural steel and painting, chemical anchor fasteners, aluminium work for doors-fixed, aluminium work for doors-shutters, 100mm brasslocks, aluminium round shape handle, aluminium towerbolts, toughened glass panes of 6.0 mm thick

State Government

TRN :34796515 | 02 Aug, 2025

Tender Value : 89.64 Lacs

Barasat 1464 - West Bengal

Tender for surveying, planning, design, drawing and construction of ms pipe carrying steel structural bridge supported on rcc column pier with adequate piles foundation over river icchamoti near rakhal das setu including shifting and relaying of existing 350

Central Government/Public Sector

TRN :34782230 | 24 Jul, 2025

Tender Value : 0

Sonitpur - Assam

Tender for gem bids for ojls, superstructure of ojls living puf shelter water storagetank and all other spacification fabrication from structuralsteel section for staging of water storage tank and all otherspacification wc european and all other spacification chromium plated toilet paper and all other spacification brass chromium plated towel and all other spacification chromium plated piller cock and all other spacification stop cock angular type and all other spacification stopcock t type chromium plated and all other spacification brass chromium plated shower and all other spacification bib cock long spout brass chromium plated and all otherspacification pvc connection and all other spacification peg set of six fitted and all other spacification corner sheetand all other spacification soap dish ss and all otherspacification 2000 ltrs anaerobic frp lldpe septic tankand all other spacification ppr pipe 32 mm dia and allother spacification ppr pipe 20 mm dia and all otherspacification ppr socket 32 mm and all other spacification ppr elbow 90 degree 32 mm and all other spacification ppr elbow 20 mm and all other spacification ppr femalethread elbow 90 degree 20 mm dia and all otherspacification ppr female thread t 20 mm dia and all otherspacification ppr plain t 32 mm and all other spacification ppr reducer t 32-20-32 mm dia and all other spacification ppr union 32 mm and all other spacification tankconnector 32 mm and all other spacification pvc wallclamp 32 mm and all other spacification pvc wall clamp 20mm dia and all other spacification float valve 20 mm andall other spacification gate valve 32 mm and all otherspacification m seal 150 gm pkt and all other spacification taflon tape roll and all other spacification solventcement 150 gm tube and all other spacification pvcwaste pipe 32 mm and 1m long and all other spacification bid number gem2025b6413422 dated 04-07-2025 bid document1 64 1 1 chromium plated waste coupling 32 mm dia and all otherspacification, non skid ceramic tiles and all otherspacification, ceramic tiles and all other spacification, cpgrating 100 mm dia and all other spacification, pvc pipe110 mm dia and all other spacification, pvc socket 110 mmdia and all other spacification, pvc bend110 mm dia and allother spacification, s trap vitreous china and all otherspacification, curtain arrangement drapery and all otherspacification, pvc air pipe 32 mm dia and all otherspacification, white cement confirming and all otherspacification, vitreous china wash hand basin and all otherspacification, ppr reducer elbow 32mm x 20mm dia and allother spacification, brass cp wall mixer and all otherspacification, brass cp jet water spray and all otherspacification, plastic dustbin and all other spacification, distribution box and all other spacification, mcb spn 240volts 32 amps and all other spacification, mcb sp 6 to 32amps and all other spacification, pvc tape 19mm wide 5 mlong and all other spacification, cable pvc insulatedelectric cables and all other spacification, pvc casingcapping of size 1 inch medium grade and all otherspacification, pvc casing capping of size 3 obliq 4 inchmedium grade and all other spacification, switch piano andall other spacification, led tube light and all otherspacification, led mirror lights and all other spacification, steel screw and all other spacification, pvc switch boardand all other spacification, pvc switch board and all otherspacification, pvc l bend and t junction and all otherspacification, switch socket and all other spacification, service bracket and all other spacification, service cablepvc and all other spacification, ceiling rose and all otherspacification, led bulk head and all other spacification, pvc flexible wire copper and all other spacification, pvcflexible conduit and all other spacification, pvc round andall other spacification, plastic body fresh air fan and allother spacification, electric geyser and all otherspacification, fire extinguisher and all other spacification, earthing plate and all other spacification, ci earth pit andall other spacification, funnel fitted and all otherspacification, gi wire and all other spacification, charcoaland all other spacification, salt normal and all otherspacification, air termination and all other spacification, testing point terminal block and all other spacification, aluminium strips and all other spacification, galvanized ironstrip and all other spacification, insulating pvc block and allother spacification, gi pipe and all other spacification, nutand bolts and all other spacification, individual standaloneplastic body smoke alarm and all other spacification, individual standalone plastic body heat alarm and all otherspacification, fire ball extinguisher and all otherspacification, study chair and all other spacification, studytable and all other spacification, bed hard steel and allother spacification, locker steel and all other spacification, looking mirror and all other spacification, water dispenserand all other spacification, portable indoor and all otherspacification

Central Government/Public Sector

TRN :34767800 | 24 Jul, 2025

Tender Value : 2.96 Crore

Ranga Reddy - Telangana

Tender for gem bids for procurement, bar round,stainless steel,p/n d17-4ph ann 5/16in (8.0mm),solution heattreated, central ground, ams 5643r, austenetic type-non magnetic bright stainless steel plate in cold rolled,annealed,pickled condition con.to us federal spec.qq-s-766c, aisi 304-chromium-18 percentage , nickle-8 percentage , halstd 1210,size thickness6mm x 1000 x 1000mm. plate, stainless steel,aisi type 304l,annealed, no.2d finish, astm a-666, size - thickness6.35 x 1000 x1000mm bar round,low alloy steel, condition annealed, hot rolled,specification dsae 4340 /en24, bs 817m40, ams-s-5000a cond.c(canc), size - dia 15.9mm, 1 to 2m length bar round,stainless steel,17-4ph,solution heat treated, central ground ams 5643r, size - dia 15.9 x 500mm, bar round,stainless steel,d17-4ph,solution heattreated, central ground, ams 5643r, size - dia 6.35 x 500 to 1000mm. austenitic type free machining non-magnetic bright quality stainless steel round conf.to hal std 1206,aisi-303-gr18/10,dia 65mmx2 to 3 mtrs length austenitic type free machining non-magnetic bright quality stainless steel hexagonal conf.to hal std 1206,aisi-303-gr18/10,a/f 19mmx2 to 3 mtrs length medium carbon steel cold drawn round conforming to hal std 1051, is 1570 part ii, grade (c-40 / 40 c 8) / en 8 , en 10083-3 / bs 080 m40 , bs 970 size dia 25 mm x 1 to 2 meters in length. ss 304 round, condition annealed, specification annealed, specification 304, qq-s-763 / 304, astm a276 / aisi 304 / 1.4301 grade x5 crni189, din 17440 / 1.4301 grade x5 crni1810, en 10088-3 / bs 304 s31, bs970 / uni x5crni1810, uni 6900 / 4 /gost 08kh 18n10 or o6kh 18n11 / is 1570-5 grade x04cr19ni9 / is 6603, grade x04 cr19ni9 / en 58e size dia 16 mm x 1 to 2 meters in length. ss 304 round, condition annealed, specification annealed, specification 304, qq-s-763 / 304, astm a276 / aisi 304 / 1.4301 grade x5 crni189, din 17440 / 1.4301 grade x5 crni1810, en 10088-3 / bs 304 s31, bs970 / uni x5crni1810, uni 6900 / 4 /gost 08kh 18n10 or o6kh 18n11 / is 1570-5 grade x04cr19ni9 / is 6603, grade x04 cr19ni9 / en 58e size dia 30 mm x 1 to 2 meters in length. hot rolled structural steel sheet, condition normalised, specification 1.0037 s 235jr, en 10025 / rst 37.2, din 17100 / fe 360 b, uni 7070 / bs 40b, bs 4360 size thickness 3 mm x 1000 x 1000 mm with pvc coating on both sides. stainless steel plate, specification ss 304 per qq-s-766 size thickness12 mm x 1000 x 1000 mm. bar round,stainless steel,aisi type 303, annealed,0.5in,cold finish, ams 5640u type 2, dia 12.7 (0.5in) x 500mm, austenitic type (303 se) free machining non-magnetic bright quality stainless steel hexagonal bar conforming to hal std 1206 / 303 se, astm a 582 / ams 5641 / ams 5640 type 2 / mil-s-7720, 303 se / bs 303 s 41, bs 970 / aisi 303 se size a/f 4.8 mm x 2 to 3 meters in length bar hexagonal,stainless steel,aisi type 303, sollution heat treated, ams 5640u, size -a/f 4.7625 x 500 to 1000 mm hexagonal,stainless steel,(5/8 in) ,aisi type 303 annealed, cold finish,ams5640u, type2, size -a/f15.875 (5/8in) x 500 to 1000mm ni-cr-mo alloy steel round, conforming to hal std 1032, condition ht (hrc 32- 38), specification 1.6562 40nicrmo8, din 17200 / en24,bs 970/bs 817 m40, bs 970 /is 5517 / 4367 / 3930 gr 40ni6cr4mo3 / gr 30chnml , gost 4543, size dia 20 mm x 1 to 2 meters in length. ni-cr-mo alloy steel round, conforming to hal std 1032, condition ht (hrc 32- 38) 1.6562 40nicrmo8, din 17200 / en24,bs 970/bs 817 m40, bs 970 / is 5517 / 4367 / 3930 grade 40ni6cr4mo3 / gr 30chnml , gost 4543 size dia 25 mm x 1 to 2 meters in length. hot rolled ni-cr-mo alloy steel round condition annealed, conforming to hal std 1032, as per en 24, bs 970 / bs 817 m40, bs 970 / gr 40, ni6 cr 4 mo 3, is 5517 or is 3930, size dia 25 mm x 1 to 2 meters in length. austenitic stainless steel rod, condition plusat (solution annealed), specification z10cnf18-09 (or) x8crnis18-09 as per en 10088-3, , tensile strength 500-750 mpa, size dia 6 mm x 1 to 2 meters in length. austenitic stainless steel rod, condition plusat (solution annealed), specification z2cn18-10 (or) x2crni18-10 as per en 10088-3,tensile strength 500-750 mpa size dia 7 mm x 1 to 2 meters in length. austenitic stainless steel rod, condition plusat (solution annealed) specification z10cnf18-09 (or) x8crnis18-09 as per en 10088-3, tensile strength 500-750 mpa ,size dia 14 mm x 1 to 2 meters in length.. austenitic stainless steel hexagonal rod, condition plusat (solution annealed), specification z10cnf18-09 (or) x8crnis18-09 as per en 10088-3, tensile strength 500-750 mpa ,size a/f 5 mm x 1to 2 meters in length. austenitic stainless steel hexagonal rod, condition plus c700, specification x8crnis18-09 as per en 10088-3, tensile strength rm equal to 700-850n/mm2, size a/f 5 mm x 1to 2 meters in length. aluminium bronze rod condition annealed, conforming to hal std 1313, ams 4640 / astm b150, c63200 size dia 35 mm x 1 to 2 meters in length aluminium bronze rod condition annealed, conforming to hal std 1313, ams 4640 / astm b150, c63200 size dia 40mm x 1 to 2 meters in length. aluminium bronze rod, condition hard (150 to 170 hb), specification (bs 1400 ab2) / (as 1565-c95810) / (astm b505 and b271-958) / (sae-ca958) / (uns-c95800), size dia 55 mm x 2 to 3 meters in length. aluminium bronze rod condition annealed, conforming to hal std 1313, ams 4640 / astm b150, c63200 / bs 1400 - ab2 size dia 65 mm x 1000 mm in length. brass sheet hal std 1300-1/4h, is 410-cuzn-37-1/4, size thickness 0.4mm x 350 x 1200mm with pvc coating on both sides. free machining brass rod, specification cuzn39pb3 r-430 as per en 12164 / hal std1301-1/2 hard, size dia 6 mm x 1 to2 mtrs in length. electrolytic copper sheet,strip andfoil, condition annealed (o) as per gr cu-etp, is 191 part v/ is 14811,gr etp/ cu-etp(mechanical properties),is1897/hal std 1310-o, size 0.8 mm x 350 mm x 1200 mm. copper tube conforming to hal std 1311, condition drawn, as per bs 2871 part 2, c101 / is 2501, etp tube size od 6 mm x 0.5 mm (id 5.0 mm) x 2 to 3 meters in length and ends should be covered with end caps. al. alloy sheet hal std 1252-1/2h,is-737-74 gr.31000 (ns-3)1/2h, bs 1470 gr.ns3 or l61, 59 or qqa-359 gr.3003 or enaw 573-3-3103 thickness1mmx1000x1000mm alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness10 mm, min. size 1000x1000mm, tolerances as per ansi h35.2/ hal std. 1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness10 mm, min. size 1000x1000mm, tolerances as per ansi h35.2/ hal std. 1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250 th. thickness12 mm, min. size 1000x1000mm, tolerances as per ansi h35.2/ hal std. 1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness14 mm, min. size 1000x2000mm, tolerances as per ansi h35.2/ hal std. 1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness20 mm, min. size 1000x1500mm, tolerances as per ansi h35.2/ hal std. 1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250 th. thickness22.5 mm, min. size 3 feet x 6 feet .,tolerances as per ansi h35.2/ hal std. 1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness28.5 mm, min. size 1000x1000mm, tolerances as per ansi h35.2/ hal std. 1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness30 mm, min. size 1000x1000mm, tolerances as per ansi h35.2/ hal std. 1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness19.05 mm, min. size 1250 x 2500 mm, tolerances as per ansi h35.2/ hal std.1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness32.25 mm, min. size 1000x1000mm, tolerances as per ansi h35.2/ hal std. 1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness25.4 mm, min. size 1000x2000mm, tolerances as per ansi h35.2/ hal std. 1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness16 mm, min. size 1000x1000mm, tolerances as per ansi h35.2/ hal std. 1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness40 mm, min. size 1000x1000mm, tolerances as per ansi h35.2/ hal std.1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness57.2 mm, min. size 1000x1000mm, tolerances as per ansi h35.2/ hal std.1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness50 mm, min. size 1000x1000mm, tolerances as per ansi h35.2/ hal std.1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness60 mm, min. size 1000x1000mm, tolerances as per ansi h35.2/ hal std.1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness35 mm, min. size 1000x1000mm, tolerances as per ansi h35.2/ hal std.1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness69.85 mm, min. size 1000x1000mm, tolerances as per ansi h35.2/ hal std.1250. (approx. wt per sheet is 196 kgs) alclad al.alloy sheets, spec. 2014/2014 a-t6 /wp, cladding 1050 a /1070/19500/19700/6003 on both sides as per bs l165/bs l167 / en 4400-2/en 2087/gr 24345-wp al.clad, is 3436/al.clad 2014,astm b209/ams 4029 clad/hal std 1250, th. thickness5.0 mm, min. size 1000x1000mm, tolerances as per ansi h35.2/ hal std.1250. it should be protected with transparent pvc coating morethan 50micro on both sides. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness6.0 mm, min. size 1000x2000mm, tolerances as per ansi h35.2/ hal std.1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness8.0 mm, min. size 1000x1000mm, tolerances as per ansi h35.2/ hal std.1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness32.0 mm, min. size 1000x1000mm, tolerances as per ansi h35.2/ hal std.1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness18.0 mm, min. size 1000x1000mm, tolerances as per ansi h35.2/ hal std.1250. al. alloy plate thickness12.7mm, temper t651, specification (6061,qq-a-250/11)/(6061,astmb209)/(ams4027)/(is 65032(hp20),is736)/(6061-bsh20,en 573-3/en 485-2)/(enaw6061, en573-3/en 485-2)/(uni9006/2,en573-3/en 485-2) / (din almg1sicu 3, 3211, en573-3 / en 485-2) size thickness 12.7 x 1200 x 1800 mm al. alloy plate thickness15.87mm, temper t651 specification (6061,qq-a-250/11) / (6061,astmb209) /(ams4027) / ( is 65032(hp20),is736)/(6061-bsh20,en 485-2/en 573-3)/(enaw6061, en573-3/en 485-2)/(uni9006/2,en573-3/en 485-2) /(din almg1sicu 3,3211,en573-3/en 485-2) size thickness 5/8 inch (15.875mm) x 4 feet x 6 feet al.alloy plate, temper t651 specification (6061,qq-a-250/11)/(6061,astmb209)/(ams4027)/ (is 65032(hp20),is736)/(6061-bsh20,en 485-2/en 573-3)/(enaw6061, en573-3/en 485-2)/(uni9006/2,en573-3/en 485-2) /(din almg1sicu 3,3211,en573-3/en 485-2/) size thickness 3/4 inch (19.05) mm x4 feet (1200 mm) x 6 feet (1800 mm) aluminium alloy plate, specification en 485-2, grade enaw6061, condition t6/t651 (or) specification is 736, grade 65032, condition wp (or) ams 4027 size thickness1 inch (25.4mm)x1250 x 2500 mm. aluminium alloy sheet, condition t6, specification enaw 6061, en 485-2, size thickness 2.5 mm x 1000 x 1000 mm. packing pvc coating of 50 microns thickness / any equivalent protective coating on both sides of sheet to prevent scratches. material aluminium alloy plate, condition t6/t651, specification enaw 6061, en 485-2, size thickness 6 mm x 1000 x 1000 mm. al alloy plate thickness 31.75 mm,temper t651, spec (6061,qq-a-250/11)/(6061,astmb209)/(ams4027)/(is 65032(hp20),is736)/(6061-bsh20,en 573-3/en 485-2)/(enaw6061, en573-3/en 485-2)/(uni9006/2,en573-3/en 485-2) /(din almg1sicu 3,3211,en573-3/en 485-2), size 31.75 x 1000 x 1000 mm material aluminium alloy plate, specification en 485-2, grade enaw6061, condition t6/t651 (or) specification is 736, grade 65032, condition wp (or) ams 4027 size thickness 35mm x 1250 x2500mm aluminium alloy plate, specification t6 , en 485-2, grade enaw6061,is 736, grade 65032, condition wp (or) ams 4027 size thickness 40mm x 1250 x2500mm al alloy plate thickness 48 mm, temper t651,spec (6061,qq-a-250/11)/(6061,astmb209)/(ams4027)/( is 65032(hp20),is736)/(6061-bsh20,en 573-3/en 485-2) /(enaw6061, en573-3/en 485-2)/(uni9006/2,en573-3,en 485-2) /(din almg1sicu 3,3211,en573-3/en 485-2), size 48 x 1000 x 1000 mm plate,aluminium alloy,6061,t651,8mm, ams 4027n thickness8x1000x1000mm , aluminium alloy sheet al-1100-h14 per qq-a-250/1, size - thickness0.13 x 350 x 350 mm, packing pvc coating of 50 microns thickness/ any equivalent protective coating on both sides of sheet to prevent scratches. aluminium alloy plate, condition t6, specification 6061-t6 per qq-a-250/11, size thickness 31.75 mm(1 1/4in) x,1000x1000 aluminium alloy plate, condition t651, specification 6061-t651 per qq-a-250/11,ams4027n size thickness 76.2 mm (3in) x1200x1200mm aluminium alloy plate, condition t7351, specification 7075-t7351 per ams-qq-a-250/12 plususq, size thickness 114.3 mm (4.5in) x700x650mm aluminium alloy plate, condition t651, specification 6061-t651 per ams4027n size thickness 57.15mm (2.25in) x1000x1000mm plate,aluminium alloy,specification 6061,condition t651,,ams-qq-a-250/11a(canc), thickness38.1 (1.5in)x1000x1000mm. plate, aluminium alloy, 6061, t651,size - thickness6.35 x 1000 x 1000mm, ams-qq-a-250/11a (canc.), aluminium alloy sheet 6061,t651/t6, size - thickness3x1000x2000mm, ams-qq-a-250/11a(canc) / bs en 485 -2 2008, packing pvc coating of 50 microns thickness / any equivalent protective coating on both sides of sheet to prevent scratches. aluminium alloy sheet, specification 6061, condition t6 51, ams 4027n size thickness 2mm x 1250 x2500mm with pvc coating of thickness 50 microns and above on both sides. aluminium alloy plate, condition t651, specification 6061-t651 per qq-a-250/11, size thickness 16 mm x1000 x 1000 mm. aluminium alloy plate thickness19.05mm, condition t651, specification 6061-t651 per qq-a-250/11, size thickness 19.05 mm x1000 x 1000 mm. aluminium alloy plate, condition t651, specification 6061-t651 per qq-a-250/11, size thickness (2.5in) 63.5 mm x1000 x 1000 mm. al alloy plate 6061 -t651, size thickness 8 x 1000 x 1000mm. feet aircraft quality feet aluminium alloy bare sheets con to ams-qqa-250/11. bar round,aluminium alloy,specification - 6061, condition -t6, extruded, ams-qq-a-200/8,size - dia 11.5 (7/16 in) x500mm bar round,aluminium alloy,specification 6061, condition t651,cold finish, ams-qq-a-225/8a(canc), p/n d 6061, t651,1.3/4in,44.5(1.75in) x 500mm bar round,aluminium alloy, specification - 6061,condition t651, cold finish, ams-qq-a-225/8a (canc) p/n d 6061, t651,2.1/2in,. 63.5 (2.5in) x500mm bar round aluminium alloy,specification - 6061, condition -t651,cold finish, ams-qq-a-225/8a (canc), dia 9.6 mm (3/8 in) x 500mm. al.alloy round dia 16 mm x 2 to 3 mtrs in length, temper t6511, spec (6061,qq-a-200/8)/(enaw6061,en573-3/en 755-2)/(is grade -65032(he20),is733)/(6061-bsh20,en 573-3/en 755-2)/(ams4150)/(6061,astmb221)/(din almg1sicu 3.3211, en573-3 /en 755-2)/(uni9006/2,en573-3/en 755-2) aluminium alloy round, spec aa2014-t652 , size dia 25 mm x 1000 mm aluminium alloy round, spec aa2014-t652 , size dia 70 mm x 1000 mm al alloy round cond t4, spec astm b316 grade aa2117, dia 5 mm x 2 to 3 mtrs in length al alloy round cond t4, spec astm b316 grade aa2117, dia 6 mm x 2 to 3 mtrs in length aluminium alloy plate, condition t651, specification almgsi1 or en aw-6082 as per nf en 485-1 and2, size thickness 10 x 1000 x 1000 mm. aluminium alloy plate, condition t651, specification almgsi1 or en aw-6082 . chemical composition is as per bs en 573-3 and mechanical properties are as per bs en 485-2, size thickness 3 x 1000 x 1000 mm. it should be protected with pvc coating morethan 50 microns on both sides. aluminium alloy plate, condition t651, specification almgsi1 or en aw-6082 as per nf en 485-1 and2, size thickness 44 x 1000 x 1000 mm. al.alloy plate 6061-t6, size - thickness12.75 (1/2in) x 1000 x 1000mm, ams-qq-a-250/11a al.alloy round 6061-t6, size - dia 6.35 ( dia 1/4 inch ) x 1000mm.extruded, ams-qq-a-200/8 aluminium wire conforming to is 739-1966, grade 19500, condition annealed, size dia 1.0mm x 2 to 3kg spools. one side/two sides polished(ra 0.2micro m) non-fading black electro coloured anodized ( as per mil-a-8625, type ii, class 2 ) sheet aluminium specification hal-1255 condition 3/4 hard or is737-19000-h6 size thickness 0.5 mm x 300mm x 300mm aluminium wire conforming to is 739-1966, grade 19500, condition annealed, size dia 2.0 mm or 14 swg (2.03 mm approx.) in 3 to 5 kg. spools. aluminium alloy sheet, 5052, h32, size - thickness2.0 (0.08in) x1000 x1000mm, ams-qq-a-250, packing pvc coating of 50 microns thickness / any equivalent protective coating on both sides of sheet to prevent scratches. aluminium alloy sheet 5052,h32, size - thickness3.175 x1000 x1000mm ,ams-qq-a-250/8b, packing pvc coating of 50 microns thickness / any equivalent protective coating on both sides of sheet to prevent scratches. aluminium alloy sheet, condition h111/o,specification en aw-5083 or ag4.5 or almg4.5mn as per bs en 573-3 and bs en 485-2, size thickness 2.0 mm x1250 x 2500 mm with pvc coating of thickness 50 microns and above on both sides. aluminium alloy sheet, specification enaw 5052,en573-3/en485-2/5052, qq-a-250/8,5052,astm b209 ,temper h32/h22 size 0.2 mm x 1000 mm x 1000 mm,packing pvc coating of 50 microns thickness / any equivalent protective coating on both sides of sheet to prevent scratches. aluminium alloy sheet, specification enaw 5052,en573-3/en485-2/5052, qq-a-250/8,5052,astm b209 ,temper h32/h22 size 0.5 mm x 1000 mm x 1000 mm,packing pvc coating of 50 microns thickness / any equivalent protective coating on both sides of sheet to prevent scratches. aluminium alloy sheet, specification enaw 5052,en573-3/en485-2/5052, qq-a-250/8,5052,astm b209 ,temper h32/h22 size 0.6 mm x 1000 mm x 1000 mm,packing pvc coating of 50 microns thickness / any equivalent protective coating on both sides of sheet to prevent scratches. aluminium alloy sheet,specification enaw 5052,en573-3/en485-2/5052, qq-a-250/8,5052,astm b209 ,temper h32/h22 size (0.03in) 0.8 mm x 1000 mm x 1000 mm,packing pvc coating of 50 microns thickness / any equivalent protective coating on both sides of sheet to prevent scratches. aluminium alloy plate, condition h111/o, specification en aw-5083 or ag4.5 (or) almg4.5mn as per bs en 573-3 and bs en 485-2, size thickness22 x 1000 x 1000 mm.

Related Searched Keywords : structural steel

List of structural-steel Tenders

Tender for supply of round steel structural standard quality 12 mm. dia. in length 5.5 mtrs. to 13.5 mtrs. material and specification : is:2062:2011rev.7, amend. no.1 of nov. 2012, grade: e250 a..

Tender for gem bids for custom bid for services - 1 structural repair of converterand associated mechanical equipments, 2 replacement oftrunion pins of hot metal ladles and steel teeming ladles, 3 convertor lamella plate replacement and shell protectionand radiation p..

Tender for gem bids for structural, ms angle 40x40x5 mm, ms tee 40x25x3 mm, ms channel75x40 mm ismc, ms angle 25x25x3 mm, ms flat 50x6mm, steel reinforcement bars 8 mm diameter, steelreinforcement bars 10 mm diameter

Tender for replacement of steel structural, truss, pipe racks, supports etc. in phosphate plants and other area under sr.mmm p and w

Tender for surveying, planning, design, drawing and construction of ms pipe carrying steel structural bridge supported on rcc column pier with adequate piles foundation over river icchamoti near rakhal das setu including shifting and relaying of existing 350

Get structural steel Tender Alert...

Related Searched Keywords : structural steel

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us