Filters

List of tipper Tenders

List of latest tipper Tenders in Indian Tenders. Click on any tipper Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for tipper Tenders.

All-Tenders (45)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

corporations/Associations/Others

TRN :49051727 | 19 May, 2025

Tender Value : 87.18 Lacs

Bhavnagar - Gujarat

Tender for work at various places in uttarkrushnanagar ruva ward (package-1); 1 earth work in cutting in all sorts of soil and soft murrum including conveying and spreading the stuff, embankment as and where directed within 8.0 km m. from the end of the cuting with all required lead &lift. 2514.96 cumt 200.00 502992.00 2 supply and stacking spreading & rolling of g.s.b. 838.32 cumt 999.00 837481.68 3 providing, laying, spreading and compacting graded stone aggregate to wet mix macadam (as per table 400 - 10 and 400 - 11) specification including premixing the material with water at omc in mechanical mix plant as per approved design mix, carriage of mixed material by tipper to site, laying in uniform layers with motor grade/front end loader/paver finisher, in sub base/base course on a well prepared under base and compacting with vibratory roller 399.20 cumt 1173.00 468261.60 4 pcc (1:3:6) icluding all material and compacting with surface vibrator 399.20 cumt 3011.00 1201991.20 5 providing form work of ordinary timber planking so as to give a rough finish including centring. shuttering strutting and propping etc. height of propping and centring below supporting floor to ceiling not ex-exceeding 4m. and removal of the same for in including reinforced concrete and plain concrete work 600.00 smt 120.00 72000.00 6 providing t m t. bar reinforcement for r.c.c. work including bending binding and placing in position complete up to floor two level. 10459.04 kg 75.46 789239.15 7 providing laying controlled reinforced cement concrete m 25 using minimum cement content @ 450 kg/cmt including curing complete excluding the cost of form work and reinforcement for reinforced concrete work in concrete road coarse and fine aggregate confirming to is:383 maximum size of coarse aggregate not exceeding 25 mm, using mechanical weigh batcher, mixed as per approved mix design, laid, placed & distributed with sufficient man power using m.s. side rail of road thickness with necessary nut bolt plates, fixing as per width, compacted with poker vibrator ( trimix ) & surface plate vibrator, troweling to be carried out with the same machine running on troweling blades, finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler separation membrane, sealant primer, joint sealant debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawings/instructions 798.40 cumt 5956.00 4755270.40 8 refitting of manhole / inlet at road level. 50.00 nos 1154.00 57700.00 9 supply of manhole frame cover

State Government

TRN :49053871 | 14 May, 2025

Tender Value : 0

Anantnag - Jammu And Kashmir

Tender for stage contract for sub division anantnag.- stage contract anantnag sub division. 2 engagements of jcbfor execuation of works of various natures 3 surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -all kinds of soil 4 earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed,( all kinds of soil) 5 earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by engineer-in-charge. all kinds of soil : 6 earth work in excavation by manualmeans in trenches for foundations, drains, pipes, cables etc .upto required depth ) and for shafts, wells, cesspits including dressing of sides and ramming of bottoms , including getting out excavated earth and disposal of surplus excavated earth as directed,( all kinds of soil) 7 supply and filling of rbm of specified size including spreading, watering, ramming, compacting with prr of 8 to 10 tonne capacity and including carriage of the same from approved source upto site of work complete 8 felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. 9 beyond 30 cm girth upto and including 60 cm girth. 10 beyond 60 cm girth upto and including 120 cm girth. 11 beyond 120 cm girth upto and including 240 cm girth. 12 banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m in all kinds of soi 13 supply and filling of khak bajri including spreading, watering, ramming, compacting with prr of 8 to 10 tonne capacityincluding carriage of the same from approved source upto site of work complete( for berm) 14 providing / laying of rcc pipes in proper position/ grade including cutting of road surface upto required depth, providing requisite cushion including carriage ofall materials and pipesupto site ofwork complete. 15 10 16 12 17 14 18 16 19 20 20 24 21 32 22 36 23 40 24 48 25 providing / laying of ms pipes in proper position/ grade including cutting of road surface upto required depth, providing requisite cushion including carriage ofall materials and pipesupto site ofwork complete. 26 6 27 8 28 10 29 12 30 scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material within all lifts and lead upto 1 km (by mechanical means). 31 scarifying metalled (water-bound) road surface including disposal of rubbish lead upto 50m and consolidation of the aggregate received from scarifying with power road roller of 8 to 10 tonne capacity. 32 providing and laying water bound macadam base course with quarry crushed stone aggregate 90 to 45mm size, stone screening 13.20mm size and binding material as per morth specification including screening, sorting, spreading to template and consolidation with prr of 8 to 10 tonne capacity including carriageofquarry crushedstone aggrregateand stone screeing, stone dustfrom approved soucrce upto site of wotk complete(finished work to be measured) 100mm compacted thickness 33 providing and laying water bound macadam base course with quarry crushed stone aggregate 63 to 45mm size, stone screening 13.20mm size and binding material as per morth specification including screening, sorting, spreading to template and consolidation with prr of 8 to 10 tonne capacity including carriageofquarry crushedstone aggrregateand stone screeing, stone dustfrom approved soucrce upto site of wotk complete(finished work to be measured) 75mm compacted thickness 34 providing and laying water bound macadam base course with quarry crushed stone aggregate 53 to 22.4mm size, stone screening 11.20mm size and binding material as per morth specification including screening, sorting, spreading to template and consolidation with prr of 8 to 10 tonne capacity including carriageofquarry crushedstone aggrregateand stone screeing, stone dustfrom approved soucrce upto site of wotk complete(finished work to be measured) 75mm compacted thickness 35 providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (wmm) specification including premixing the material with water at omc in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of engineer-in-charge 36 providing and applying tack coat using hot straight run bitumen of grade –vg-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. on bitumen surface @ 0.50 kg/sqm 37 providing and applying tack coat using hot straight run bitumen of grade –vg-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. on w.b.m. @ 0.75 kg/sqm 38 providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of engineer-in-charge. 50 to 100 mm average compacted thickness with bitumen of grade vg-10 @ 3.5% (percentage by weight of total mix) 39 providing and laying semi- dense bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of engineer-in-charge. 25 mm compacted thickness with bitumen of grade vg 10 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of aggregate) 40 providing and laying dense graded bituminous macadam using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of engineer-in-charge. 16.62.1 50 to 100 mm average compacted thickness with bitumen of grade vg-30 @5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of aggregate) prepared in batch type hot mix plant of 100-120 tph capacity. 16.62.2 50 to 100 mm average compacted thickness with bitumen of grade vg-30 @5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of aggregate) prepared in drum type hot mix plant of 60-90 tph capacity. 41 providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade vg-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete. 42 providing and laying of stone soling, hand packed, including carriage of same from approved source upto site of work complete. 43 providing and laying in position cement concrete in1 : 4 : 8 (1 cement :4 coarse sand : 8 graded crushed stone aggregate, 40mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. 44 providing and laying in position cement concrete in1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate, 40mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. 45 providing and laying in position cement concrete in1 : 2 : 4 (1 cement :2 coarse sand : 4 graded crushed stone aggregate, 20mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. 46 providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. but including carriage of all materials from approved sources up to site of work complete.all works upto plinth level (1: 1.5 : 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 47 providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. but including carriage of all materials from approved sources up to site of work complete.all works upto plinth level (1 : 2 : 4 (1 cement :2 coarse sand : 4 graded crushed stone aggregate, 20mm nominal size)) 48 reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.but including carriage of all materials from approved sources up to site of work complete. (1: 1.5 : 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 49 reinforcement for rcc work including straightening cutting, bending, placing in position and binding all complete (thermo mechanically treated bars) including all carriages complete. fe-500 d or more 50 providing / fixing of necessary farm work / shuttering including strutting, propping etc and removal of same complete 51 foundations, footings, bases for columns 52 return walls, walls (any thickness) including attached pilaster buttresses, plinth and string course fillets, kerbs and steps etc. 53 suspended floors, roofings, landings, balcones and access plateform 54 50mm thick cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished wit a floating coat of neat cement including carriage of all materials from approved sources upto site of work complete 55 40mm thick cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished wit a floating coat of neat cement including carriage of all materials from approved sources upto site of work complete 56 25mm thick cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished wit a floating coat of neat cement including carriage of all materials from approved sources upto site of work complete 57 12mm cement plaster of mix 1:4 (1cement: 4 fine sand) including all carriages complete. 58 12mm cement plaster of mix 1:6 (1cement: 6 fine sand) including all carriages complete. 59 15mm cement plaster of mix 1:4 (1cement: 4 fine sand) including all carriages complete. 60 15mm cement plaster of mix 1:6 (1cement: 6 fine sand) including all carriages complete. 61 dry random rubble masonry in 100 x100mm mesh size g.i wire crate made of 5mm dia g.i wire using bond stones ncluding wrapping /tightening of wire crate and binding wire crates after stone work including cost of all material involed (crates and stones) and carriage of same upto site work complete (quarry stones) 62 random rubble masonry with hard stone (quarry) in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement : 6 coarsesand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of all materials from approved sources up to site of work complete. 63 engagement of labour /masdoor for one day 64 engagement of skilled labour with all machinary like cutters , axe etc for purning of the trees 65 pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. 66 removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive 67 clearance of slipsdisposal lead upto 50 m and lift upto 1.5 m. 68 in ordinary soils disposal lead upto 50 m and lift upto 1.5 m. 69 in soils; mixed with moorum/kankar/shingle/boulders; disposal lead upto 50 m and lift upto 1.5 m. 70 in soils; mixed with decomposed rocks; by blasting or any other means 71 providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semiautomatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, t&p, cleaning the road surface of all dirt, seals, oil, grease and foreignmaterial etc. complete as per direction of engineer-in-charge and accordance with applicable specifications. 72 white washing with lime to give an even shade :old work (two or more coats) 73 white washing with lime to give an even shade :old work (one or more coats) 74 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work 75 painting road surface marking with adequate no. of coats to give uniform finish with read mixed road marking paint conforming to is: 164, on bituminous surface in white/yellow shade including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete.old work ( one or more coats) 76 providing and laying at or near ground level factory made kerb stone of m-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of engineer-incharge (length of finished kerb edging shall be measured for payment). (precast c.c. kerb stone shall be approved by engineer-in-charge). 77 manufacturing supplying and fixing retro reflective sign boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type-iv of astm-d-4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per irc : 67-2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of astm-d-4956-01 and fixing the same with suitable sized aluminum alloy rivets @ 20cm c/c to back support frame of m.s. angle iron of size 25x25x3mm along with theft resistant measures mounted and fixed with 2 nos. m.s. angles of size 35x35x5mm to a vertical post made upto m.s. tee section ismt 50x50x6mm welded with 16.0 (road work) 224 base plate of size 100x100x5mm at the bottom end and including making holes in pipes, angle flats, providing and fixing m.s. message plate of required size steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical m.s.-tee support to be painted in black and white colours). backside of aluminum sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coats including all leads and lifts etc. complete as per drawing, specification and direction of engineer-in-charge. 16.66.1 mandatory/regulatory sign boards of 900 mm diameter with part as length of 3750 mm. 78 structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete 79 structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. welded 80 supply and filling of rbm of specified grade including spreading, watering, ramming, compacting with prr of 8 to 10 tonne capacity material availabe at site

Government Departments

TRN :49055625 | 23 May, 2025

Tender Value : 0

Srinagar - Jammu And Kashmir

Tender for bids are invited for m-oil filter of tata ace hopper m-oil , diesel filter of tata ace hopper diesel filter , m-oil filter of tata 207 model 2002 , diesel filter of tata 207 model 2002 , m oil filter of escort loader 710 model 2007 , diesel filter of escort loader 710 model 2007 , tata lpk- 407 turbo m-oil filter , tata lpk- 407 diesel filter , m oil filter of maruti van2011 and 2013 model , air filter of maruti van 2011 and 2013 model , moil filter tata lpt 1613 42 bs4 model 2017 , diesel filter tata lpt 1613 42 bs4 model 2017 , m -oil filter backhoe loader escorts 2018 , diesel filter filter backhoe loader escorts 2018 , m oil filter of ashok leyland dost hopper bs6 , diesel filter of ashok leyland dost hopper bs6 , m oil filter tata sumo 2002 model , diesel filter filter tata sumo 2002 model , m oil filter mahindra bolero pick up camper 4wd model 2022 , diesel filter mahindra bolero pick up camper 4wd model 2022 , m-oil filter of tata intra v30 bs6 model , diesel filter of tata intra v30 bs6 model , m -oil filter tipper sk 1613 36 bs2 model 2010 , diesel filter tipper sk 1613 36 bs2 model 2010 , m -oil filter tipper lpk 407 bs2model 2007 , diesel filterfilter tipper lpk 407 bs2 model 2007 , m-oil filter of tata 1109 bs3 model 2011 , diesel filter filter of tata 1109 bs3 model 2011 , m-oil filter of eicher 30 25 bs3 model 2014 , diesel filter filter of eicher 30 25 bs3 model 2014 , m oil filter of tata lpt 1613 42 bs4 model 2017 , diesel filter of tata lpt 1613 42 bs4 model 2017 , m oil filter of eicher pro 2114xp bs6 model 2022 , diesel filter of eicher pro 2114xp bs6 model 2022 , m oil filter of tata ulta 16 bs6 model 2023 , diesel filter filter of tata ulta 16 bs6 model 2023 total quantity : 305

State Government

TRN :49055633 | 20 May, 2025

Tender Value : 0

Rudraprayag - Uttarakhand

Tender for tender for supply of excavator cum backhoe loader with breaker and tipper.

State Government

TRN :49055659 | 27 May, 2025

Tender Value : 0

Sundernagar - Himachal Pradesh

Tender for outsourcing for removal and clearance of weeds growth congress grass shrubs and jungle bushed of inner slopes embankment side drains of suketi diversion channel and hiring requirement of poclain jcb tipper for clearance or various nalahas

Local Bodies

TRN :49055689 | 21 May, 2025

Tender Value : 8.70 Lacs

Ghataprbha - Karnataka

Tender for purchasing of auto tipper for commercial establishment to ghataprabha in sbm grant - auto tipper for ghataprbha

Government Departments

TRN :49055702 | 29 May, 2025

Tender Value : 0

Kamrup Metro - Assam

Tender for request for pre-qualification of bidders (rfq 2025) for maintenance works to be taken up on risk and cost of the concessionaire/contractor under ro-guwahati; (a) for bituminous pavement and earthwork: 1. mobile maintenance unit with necessary equipment s. no. project length for maintenance no. of mobile units* 1 up to 50 km 1 2 more than 50 km and up to 150 km 2 3 more than 150 km and up to 300 km 3 (*)- project length specified in table above is indicative. the authority while inviting bids may review for making appropriate provision about number of mobile units required. 2. sensor paver 1 3. vibratory roller (8/10 t) 1 4. static roller (8/10 t) 1 5. small roller/compactor 1 6. bitumen/emulsion sprayer 1 7. mechanical broom (1250 sqm per hour) 1 8. air compressor 2 9. grader/backhoe loader 1 10. water tanker 2 11. dewatering pumps 2 12. tipper/dumper truck 10 13. mini hot mix plant (6/10 t/hr capacity) 1 with indirect heating arrangements 14. hot batch mix plant 120 tph capacity 1 15. string line set 1

Local Bodies

TRN :49055789 | 22 May, 2025

Tender Value : 0

Vijayapura - Karnataka

Tender for supply of 3.5 cum auto tipper for e-waste collection in vijayapura city corporation

corporations/Associations/Others

TRN :49056707 | 10 May, 2025

Tender Value : 0

Ghaziabad - Uttar Pradesh

Tender for short dated tender - tender for 01. shabby trolley 02 shabby tractor upper body (without chassis) 03. shabby wheel barrow 04. shabby frame cartel (buggi) 05. 05. shabby tipper upper body (without chassis) shabby tractor tyre only 07. shabby generator 5 kv without altinator 09. shabby g.i. pipe 1.25 inch 10. shabby small grass cutting machine 11. shabby sky lift frame with bucket 12. shabby window bracket cartoon box work of pipe fitting for fire extinguishing on newly constructed boring at mrf centre. work of ball fitting for filling tankers on pumps. supply work of sanitary vending machine, insonator, tender dryer fee bank machine for the bodys toilet located near railway road police station. (rate per piece). work of doing 01 hp boring (with gutter and fitting) at the bodys toilet located near kite college. work of supply of electrical equipment in vehicle parking at gang canal mrf center. (with fitting). work of supply of 04 mp sewer pipe for sewer suction machine. (rate per piece) work of pipe line extension from haji naeems hotel to kamle wala pond in ward no. 12.

State Government

TRN :49057087 | 19 May, 2025

Tender Value : 0

Kangra - Himachal Pradesh

Tender for tender for supply of construction materials - sand pit sand crusher gravel pit gravel crusher 20mm, 40mm, 60mm and other sizes soiling boulder stone cut stone brick top/dom shuttering of wood and steel stone breaking cement transportation from nagarota to work site goods transportation by tractor, three-wheeler and jeep in panchayat area material carriage by horses dust bin pit supply development work information board including painting and writing interlock tiles (all sizes) water tanker mixer soil tipper board making and writing water cooler benches/concrete/iron/cast iron other works by panchayat

Related Searched Keywords : tipper

List of tipper Tenders

Tender for tender for supply of excavator cum backhoe loader with breaker and tipper.

Tender for outsourcing for removal and clearance of weeds growth congress grass shrubs and jungle bushed of inner slopes embankment side drains of suketi diversion channel and hiring requirement of poclain jcb tipper for clearance or various nalahas

Tender for purchasing of auto tipper for commercial establishment to ghataprabha in sbm grant - auto tipper for ghataprbha

Tender for supply of 3.5 cum auto tipper for e-waste collection in vijayapura city corporation

Get tipper Tender Alert...

Related Searched Keywords : tipper

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us