Filters

List of wire-guide Tenders

List of latest wire-guide Tenders in Indian Tenders. Click on any wire-guide Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for wire-guide Tenders.

All-Tenders (31)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :34943416 | 05 Aug, 2025

Tender Value : 1.63 Lacs

Mathura - Uttar Pradesh

Tender for gem bids for orthodontic, elastic ligatures cotton thread libral, torque springs 16x22medium pkt of 10, stop bite guide bondable pkt of 10, crimpable hook double right and left pkt of 10, mimactivator tube for facebow 045 pkt of 10, rotation wedgespkt of 25, cheek retractor wing large 143 clear, 143degree c double side cheek retractor, crimpable stops pktof 10, essix thermoplastic vacuum forming sheets hardround 0.5mm clear shade pkt of 10, ss preformed ligatureshort ties point 010 pkt of 50, orthodontic ipr interproximalreduction gauge kit, ipr burs pkt of 5, bite rising colourcomposite, separators libral, elastic placer pkt of 10, 0012niti a w upper and lower pkt of 10, arch wire ss 19x25ovoid u and l pkt of 10, arch wire ss 21x25 u l ovoid pktof 10, straight wire ss 16x22 pkt of 10, mbt bracketsystem kit 0 point018 roth, mbt bracket system kit 0 point022 roth, 018 molar band with tube upper box, 018 molarband with tube lower box, intra oral elastic blue 3 by 16inch, intra oral elastic red 3 by 16 inch, intra oral elasticyellow 3 by 16 inch, 014 ss preformed arch wire u l pkt of10, elastic module, open coil niti spring, close coil nitispring, head gear with elastic component, orthodonticbrush for dental

Central Government/Public Sector

TRN :34918890 | 09 Aug, 2025

Tender Value : 44.95 Lacs

Visakhapatnam - Andhra Pradesh

Tender for repairs to chain link fencing barbed wire fencing concertina coil, compound wall, retaining wall, guide walls, hand rails, foot path, hard standing, area drains, stone pitching, sports facilities and certain misc b/r works at officer married repairs to chain link fencing barbed wire fencing, concertina coil, compound wall, retaining wall, guide walls, hand rails, foot path, hard standing, area drains, stone pitching, sports facilities and certain misc b/r works at officer married

Central Government/Public Sector

TRN :34906735 | 01 Aug, 2025

Tender Value : 0

New Delhi - Delhi

Tender for gem bids for radial head prosthesis uncemented with grit blasted porous coated stem surface multiple head diameter and stem length options required , suture laaso 45deg left right assorted size , suture lasso 60deg straight , ac joint sterile kit , latarjet screw , rotator cuff repair sterile kit , knotless biocomposite anchor with peek eyelet , 6 point 5mm into 16mm fully threaded anchor titanium , knot pusher cutter , suture anchor 2 point 8 3 pooint 0mm titanium with pre loaded suture , suture disc tt , rotator cuff repair double row kit , adjustable loop with double button for ac joint reconstruction , 3 point 5mm peek suture anchor with one force fibre for shouder arthroscopy , 3 point 5mm peek suture anchor with double force fibre for shouder arthroscopy , lcp distal radius volar hook plate tt with compatible screws and complete set , clavicle hook plate rt lt assorted size with 4 cortical 4 locking screws , lcp distal humerus locking plate with lateral support rt lt tt with 4 cortical 6 locking screw assorted size complete set , intertan intertrochanteric antegrade femoral nail with integrated compression screws tt complete set with screws and bolts assorted sizes , pelvic suprapubic plate 3 point 5mm 4 hole plate , lm pelvic spring plate 3 point 5mm 2 hole , lm pelvic infrapectineal plate rt lt 14 hole with 8 cortical screws , spring plate , schanz pin 3 point 5 into 75 100mm 16mm thread ss , schanz pin 5 into 150mm 16mm thread ss , guide wire 2mm threaded tip , 4 point 5mm lcp broad plate tt assorted size with compatible screws and complete set , 3 point 5 mm cortical screw with 2 point 7 head tt , 5 point 0 mm cortical screws assorted size tt , 3 point 5mm cortex screw tt assorted sizes 10mm 40 mm in 2mm increments , 3 point 5mm cortex screw tt assorted sizes 40 60mm in 5 mm increments , steinman pins dia 5 point 0 mm into 150 mm long , steinman pins dia 5mm into 175 mm long , 3 point 5 drill bit quick coupling , pen type surgical blade , bone regenerative medical kit for autologous bone implantation , modular bipolar hip prosthesis size 48 50 52 54 56 58 60 highly polished cobalt chrome triple taperd cemented femoral stem size 0 1 2 3 4 plus centraliser , hybrid thr uncemented shell size 48 50 52 54 56 58 60 62 mm plus highly cross linked acetabulum liner plus polished cocr triple tapered cemented femoral stem plus centraliser , tibial tapered screw assorted size tt

Central Government/Public Sector

TRN :34913810 | 02 Aug, 2025

Tender Value : 0

Tiruchirappalli - Tamil Nadu

Tender for gem bids for procurement, bid number gem2025b6485960 dated 23-07-2025 bid document1 33 1 1 otc wb-p500lii, pcb p10533u, wire feeder unit cmre 742, pressure roller for cmre 741 part no k5439c00, middlegear for cmre 741 part no u5185p00, feed roll 1point2 to1point2 for cmre 741 part no k5439b12, drive gear forcmre 741 part no u5185q00, pressure roller for cm 7401part no 5439c00, pressure roll holder right for cm 7401part no u5185s00, pressure roll holder left for cm 7401part no u5185t00, gear for cm 7401 part no u5185p00, feed roll 0point8by1point0 for cm 7401 part no k5439b12, center guide for cm 7401 part no u5185b05, drive gear forcm 7401 part no u5185q00, pressure screw holder for cm7401 part no u5185b09, compression spring for cm 7401part no u5185b12, pressure handle for cm 7401 part nou5185b10, pressure bolt for cm 7401 part no u5185b11, wire straightener for cm 7401 part no u5204h00, pilot forcm 7401 part no k970g72, inlet guide for cm 7401 part nou5204m02, wire wheel hub for cm 7401 part no 4739 494, plastic housing for cm 7401 part no bw0014, euro centraladaptor for cm 7401 part no am6000, guide adaptor for cm7401 part no u5204j04, feeder bock for cm 7401 part nou5260j03, outlet guide for cm 7401 part no u5260j02, small nut for cm 7401 part no u5185d04, gas solenoidvalve for cm 7401 part no 4813 001, hose elbow for cm7401 part no u4179d01, gas connector for cm 7401 partno u1997d01, flange for cm 7401 part no u1997d02, pressure nut for cmh 1407 part no k1123d05, pressurehandle for cmh 1407 part no k1123d01, cs retaining ringfor cmh 1407 part no 3361 408, pressure bolt for cmh1407 part no k5112c05, pressure spring for cmh 1407 partno u929c16, pressure roller arm for cmh 1407 part nok1822c04, pivot pin for cmh 1407 part no k1821c05, pressure roller pin for cmh 1407 part no k1821c04, springbracket for cmh 1407 part no k1123d03, interface bracketfor cmh 1407 part no k1822c06, center interface for cmh1407 part no k1822c07, feed shaft for cmh 1407 part nok1822c09, middle gear for cmh 1407 part no k1822c11, feed roller 0point8 to 1 for cmh 1407 part no k1821g00, pressure roller for cmh 1407 part no k1821x00, guidetube for cmh 1407 part no u2344b09, grooved ballbearings for cmh 1407 part no u69c02, deep groove ballbearing for cmh 1407 part no 3311 014, conductor forcmh 1407 part no k3985e01, tracheal connector for cmh1407 part no k3985e03, guide wire tube for cmh 1407 partno k5112k02, guide wire tube for cmh 1407 part nok3985e02

State Government

TRN :34899847 | 12 Aug, 2025

Tender Value : 0

Neemuch - Madhya Pradesh

Tender for gem bids for video conferencing camera / web camera v2 q2, television tv v2 q2, all in one pc v2 q2, onlineups v2 q2 . . % % 4 4 /mse exemption for years ofexperience and turnoverno& % & % . . % % 4 4 /startup exemption for years ofexperience and turnoverno 5 5 & & /document requiredfrom sellerexperience criteria, bidder turnover, certificate requestedin atc, oem authorization certificate, oem annualturnover, additional doc 1 requested in atcin case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer7 7 9 9 : : ; ; & 9 & 9 < < 9 9 ; ; > >? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?yes documents submitted as part of a clarification orrepresentation during the tender/bid process will also bedisplayed to other participated bidders after log in -- b b c c 5 5 d d / minimum number ofbids required to disable automatic bidextension1 d /bid number: gem/2025/b/6461391; /dated: 22-07-2025 & & / bid document1 / 22 ; 9; 9 d d, , l l -- / / number of days for which bidwould be auto--extended7 n %n % ;5 ;5 ; ; /bid to ra enabledno 4 4 /type of bidtwo packet bid4 4 q q /primary product categoryvideo conferencing camera / web camera v2 r r & t & t /time allowed for technicalclarifications during technical evaluation2 days u u b b v v u u 4 4 / % % < 9 < 9 : : /inspection required byempanelled inspection authority / agenciespre-registered with gemno r r v v /evaluation methodtotal value wise evaluation x & x & /arbitration clauseno /mediation clauseno //bid details /emd detail > /advisory bankstate bank of india /emd amount25000 /epbg detail b /requirednoa. . z % & 4& % & % 4 > n 9 /emd exemption: the bidder seeking emd exemption, must submit the valid supporting documentfor the relevant category as per gem gtc with the bid. under mse category, only manufacturers for goods andservice providers for services are eligible for exemption from emd. traders are excluded from the purview of thispolicy.b. , , \ u < ; / emd & performance securityshould bein favour of beneficiary, wherever it is applicable. \ \ /beneficiary : collector and sacretory district e-governance societycollector neemuch, general administration department madhya pradesh, n/a, collector neemuch /splitting2 / 22 ; / bid splitting not applied. /mse purchase preference /mse purchase preferenceno /mii purchase preference /mii purchase preferenceno1. estimated bid value indicated above is being declared solely for the purpose of guidance on emd amount andfor determining the eligibility criteria related to turn over, past performance and project / past experience etc.this has no relevance or bearing on the price to be quoted by the bidders and is also not going to have anyimpact on bid participation. also this is not going to be used as a criteria in determining reasonableness ofquoted prices which would be determined by the buyer based on its own assessment of reasonableness andbased on competitive prices received in bid / ra process. video conferencing camera / web camera v2 3 pieces bis requiredyes t t /technical specifications t / as per gem category speci cation /speci cation t t /specificationname b b r r /bid requirementallowed valuesdescription/applicationintended applicationa video conferencing camera are digital cameraspecially designed for use in video conferencingapplication.genric descriptionvideo conferencing cameragenricptz functionyes e-ptz only, yes high precision motorized-ptzor higherresolution maximum eachcamera4k hd 3840 x 2160 pixel or higherpan range minimum0pan range maximum0tilt range minimum0tilt range maximum0zoom range opticalmaximum2x, 3x, 4x, 5x, 10x, 12x, 16x, 20x, 22x, 30x, na orhigherzoom range digital maximummore than 3x - 6x, more than 6x - 9x, more than 9x -12x, 12x - 16x or higherfield of view degreemore than 105-1203 / 22 maximum frame ratesframesper second supported30, 50, 60 or highernumber of mics2control / image processing /focusing featuresnaconnectivityconnectivity outputusb uvc, uacfeature/accessoriessalient featurescmos sensoroptional features/accessoriesnaoperatingconditionsminimum operatingtemperature degree c-10, -5, 0 or lowermaximum operatingtemperature degree c40, 45, 50, 60, 70 or higherrelative humidity noncondensing at 40 deg c %rh80 or loweringress protectionip21, ip20, na or higherwarranty / servicecomprehensive on sitewarranty year5 or highertime duration for repairing/replace the defect duringwarrantywithin two weeksupply of compatible driversand software includedyesbuyer specificrequirementsonline meeting platformsupported application, softwaremicrosoft teams, zoom, cisco webex, google meetcertification / testreporttype of lab which carried outtest of complete product toprove the conformity of productas per governing specificationcertificate of govt.lab/nabl/ilac accredited.agree to provide all relavantdocuments testreport/suuporting document/reports etc to the buyer at thetime of bidding or on demandyes /speci cation t t /specificationname b b r r /bid requirementallowed valuesadditional specification parameters - video conferencing camera / web camera v2 3 pieces specification parameternamebid requirement allowed values4 / 22 package 2 supported audio&video, 3 supported operatingsystem 4 camera1 it should be all-in-one video bar with integrated microphones, speakers, 4k camera with privacy shutter, 2 it should support audio andvideo over the usb, 3 it should support latest windows os and macos 4 integrated uhd 4k 2160 p or higher capture resolution, 90 - 120-degreefov or better, 5x digital zoom or better, group framing, automaticspeaker tracking preferable to have additional ai based features5microphone, 6 speaker5 inbuilt beam array 4-6 or more microphones to capture sound. it shouldsupport full-duplex conversations, acoustic echo cancellation andbackground noise suppression. microphone pickup range should be 15 ft ormore, 100 hz - 15 khz frequency response or better bidder needs to supplywired one external expansion microphone from same oem with accessories.6 inbuilt stereo speakers, output shall be 90 db or better7 other interfaces 8 audiofeatures7 min. 1 x usb 3.0 type c, audio-in/line-in port wi-fi wireless networking formanageability and to connect with byom wireless dongle optional. 8 itshould be possible to pair a mobile phone over bluetooth & use all in onevideo bar as the speaker and microphone for the mobile phone. built-inbluetooth 4.2 or better9 video features 10 cable 11drivers9 when two or more people in the same room talk back and forth, systemshall treat them as if they are in a conversation. if the two speakers arentclose, the usb video bar displays a split screen showing the two peakersoptional. 10 minimum 5 m cable to be supplied to connect the aio withthe usb video bar from same oem 11 smart-camera experiences are builtin - no drivers or software needed plug and play support12 cloud platform certification, 13warranty, 14all requiredspecification12 device should be certified with zoom rooms, microsoft teams, googlemeet etc. cloud platform. bidder compliance certificate for at least twocloud-based platform should be provided. 13 the complete solution shouldbe from the same oem with a 5-year warranty from day one. the productshould bis/ul, ce, fcc, rohs certified. 14 all required specification as perscope of workspecification parameternamebid requirement allowed values* bidders offering must also comply with the additional specification parameters mentioned above. //n ; ^ n ; ^ /consignees/reporting officer and quantity5. .5. ./s.no. //n ; ^ n ; ^ /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1vc setup for mlaoffice/home indistrict neemuch 3ac, vc setup for mla office/homein district neemuch 3 ac345television tv v2 3 set bis requiredyes t t /technical specifications* t / as per gem category speci cation5 / 22 /speci cation t t /specificationname b b r r /bid requirementallowed valuesgenericdescriptiona television set or television receiver morecommonly known as tv is an electronic device forthe purpose of receiving of broadcast of video &audio content as per applicable tv broadcast systemlike ntsc/ pal etc. it enable the user to viewing andhearing programs and news etc as broadcasted /television broadcasts and may have additionalcapabilites to view other infomative programs overinternet.intended applicationto receive and play tv broadcast programs. it isdifferent from monitor which is used as output devicein it systems.type/category/class of tvsetsmart tv2display type/technologyled light emitting diode, oled organic light-emitting diode, qled quantum dot led or highernominal screen size rangeinchesmore than 38 inch - upto 46 inchaudio power minimum10w x 2, 12w x 2, 20w x 2 or higherperformance &featuresmaximum resolutionpixels supported4k ultra hd uhd: 3840x2160, 8k ultra hd:7680x4320 or higherstatic contrast ratio1200 : 1, 1300 : 1, 1400 : 1, 1500 : 1, 1600 : 1, 1700 :1, 1800 : 1, 1900 : 1, 2000 : 1, 2500 : 1, 3000 : 1, 3500 : 1, 4000 : 1, 4500 : 1, 5000 : 1 or highertypical brightness nits300 - 399, 400 - 499, 500 -699, 700-999 or highersalient featureinbuilt speakers, table mountlegs, wall mountbracketoptional featurebuilt-in set-top box, hdr high dynamic range, screen mirroring, built-in wi-fi, wi-fi direct, bluetooth, lanpowerinput power rated voltage230 +-10%, 50hzbee star rating1 star, 2 star, 3 star, 4 star, 5 star or higherrf input &connectivity portsinput portrf input, 1-hdmi port, 1-usb port, 1-vga port, 1-ethernet portaccessoriesaccessories included in thescope of supplyremote control, wall mounting bracket, standoptional accessoriesconnecting cables hdmi, nawarranty, installationcommissioningcomprehensive standardwarrantyyears1 or higherwarranty on display onlyyears3 or highercertification / testreporttype of lab which carried outtest of complete product toprove the conformity of productas per governing specificationcertificate of govt.lab/nabl/ilac accredited6 / 22 agree to provide all relavantdocuments testreport/suuporting document/reports etc to the buyer at thetime of bidding or on demandyes /speci cation t t /specificationname b b r r /bid requirementallowed valuesadditional specification parameters - television tv v2 3 set specification parameternamebid requirement allowed values1 display size, 2 viewingangle, 3 response time, 4input ports, 5output ports1 43 inches or above, 2 178178, 3 9 ms or better, 4 hdmi-3, usb 2.0-1, rj45-1, 5 digital audio out, headphone out6 special features, 7accessories6 smart share/screen share, snmp support to take control of display, wake on lan, built in quad core media player, 7 table stand/wall mount, remote and standard cables8 power supply, 9 powertype, 10 power consumption, 11 certificates8power supply, 9built-in power, 10 120w or less, 11 bis, ul, iso 9001, iso 14001, iso 45001:201812 warranty, 13 operatingsystem, 14 service12 5 years on site, 13 web os/android/taizen with latest os release, 14oem should have registered direct service center in mp to manageservice at district level with toll free number & manufacturing setup in india.15 hdmi cable/ other, 16 allrequired specification15 additional hdmi /other cable to conenct above with aio lengthminimum 10 mtr capable to transfer audio and video both, 16 all requiredspecification as per scope of work bidders offering must also comply with the additional specification parameters mentioned above. //n ; ^ n ; ^ /consignees/reporting officer and quantity5. .5. ./s.no. //n ; ^ n ; ^ /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1vc setup for mlaoffice/home indistrict neemuch 3ac, vc setup for mla office/homein district neemuch 3 ac345all in one pc v2 3 pieces bis requiredyes t t /technical specifications* t / as per gem category speci cation7 / 22 /speci cation t t /specificationname b b r r /bid requirementallowed valuesdescriptiondescription of storeall in one personal computers consist of a mouse, keyboard, display with web camera, inbuilt/integrated microphone array and speakers, aninternal cpu with connection cables and poweradapter with 1 year standard warrantyprocessor numberintel core i5-13500t, intel core i5-14500t, intel corei5-14400, intel core i5-13600t, intel core i7-13700t, intel core i9 12900t, intel core i7-12700, intel corei7-14700t, intel core i5-13500, intel core i5-14500, intel core i9-12900, intel core i7-13700, intel core i7-14700, intel core i9-13900t, intel core i9-13900 orhigherinput devicesmouse connectivitywired, wireless or higherkeyboard connectivitywired, wireless or highertype of keyboardstandard, bilingual or highergraphicsgraphics typeintegratedoperating systemoperating system factorypreloaded withcertificationwindows 11 professionalmemorytype of ramddr4, ddr5 or higherram size gb16storagetype of storage installedwith the systemnvme ssdstorage capacity in gb1024displaydisplay size - diagonal ininches58.1 - 63 22.87 - 24.8panel technologyin plane switching ips or higherportsnumber of ports1-hdmi, 1-dp, universal audio jack, 1- rj-4510/100/1000 ethernet port, 1-usb 3.1 gen 2 type a, 2-usb 3.1 gen 2 type a, 2-usb 3.1 gen 1 type a, 1-usb 3.1 gen 1 type cgenericstandheight adjustableadditional specification parameters - all in one pc v2 3 pieces specification parameternamebid requirement allowed valuesdisplay resolution, displaysizedisplay resolution - min. 1920 x 1080, display size - 23 inch or higherspeaker, connectivityspeaker - dual 2 w speakers or more, connectivity - bluetooth, wi-fi andethernet8 / 22 number of usb 2.0 ports, mouse and keyboardusb 2.0 ports - min. 03, mouse and keyboard - wirelessanti-virus, oem warrantyanti-virus - required with 05-year license, oem warranty - 5 years on siteadditional feature, all requiredspecificationadditional feature - provision to connect hdmi smart tv for audio/video, allrequired specification as per scope of workspecification parameternamebid requirement allowed values* bidders offering must also comply with the additional specification parameters mentioned above. //n ; ^ n ; ^ /consignees/reporting officer and quantity5. .5. ./s.no. //n ; ^ n ; ^ /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1vc setup for mlaoffice/home indistrict neemuch 3ac, vc setup for mla office/homein district neemuch 3 ac345online ups v2 3 pieces t t /technical specifications* t / as per gem category speci cation /speci cation t t /specificationname b b r r /bid requirementallowed valuesgenericrating in kva1.0 kvaswitching technologyigbt-pwminput voltageac single phase 160v - 260v 50hzoutput voltageac single phase 230v +/-1% 50 hzwarranty for ups years3, 4, 5 or higherbattery/backupbankbattery/backup bankprovided with online ups hint: in case the ups issupplied with battery, seller shall ensurecompliance to the gstrates as perrecommendations made inthe 45th meeting of gstcouncil dated 17th sep2021 with batterytype of battery hint: na incase battery not providedsmf-vrla conforming to jisc:8702pt.i, ii&iii, stationary lead acid batteries with tubular positiveplates in monobloc container conforming tois:13369:1992 latest9 / 22 backup time minuteshint: na in case batterynot provided30 minutesminimum guaranteed vah1600 x per kva x per hour of backup timewarranty for batteryyears by batterymanufucaturer/brand hint:na in case battery notprovided3 or higheraccessories with batterynainstallation andcommissioning orserviceinstallation and commissioning covered in the scope ofsupplyprovidedafter sales service turnaround timewithin 48 hours, within 7 dayspreventive maintenance hint:mention timeline if provided, na if not providedmonthly, bi-monthly, quarterly, half yearly, yearly, naor higherother services providedpan india service support on 24 x 7 basisperformance /functionalinbuilt isolation transformerwithoutoverall efficiency %>/ 80% & <90% with inbuilt isolation transformeroverload limit20% overload for minimum 10 minute, 20% overloadfor minimum 5 minute, 50% overload for minimum 1minute, 50% overload for minimum 3 secondstotal harmonic distortionthd%2% maximum @ 100% linear loadother functional featurescrest factor on full non-linear load is not less than 3:1accessoriesaccessoriescabling 6 meters input upto 3m and output upto3m, rack for batteriessalient featuresprotectionprotection for under voltage at battery terminal, protection of over voltagemeteringinput voltage, output voltage, input current, outputcurrentalarms and indicationsindicator for mains presence, indicator for batterycharging and dischargingadditional featurespure sinewave ac outputdesign /constructiontype of design /constructionfloor standingenclosure mm1.2 mm minimum thickness of m.s. sheet duly powdercoateddegree of protectionip21, ip20 or higherother constructional featuresbattery on/off mcb, mains on/off mcb /speci cation t t /specificationname b b r r /bid requirementallowed values10 / 22 operatingconditionsminimum operatingtemperature0, -5 or lower degree celsiusmaximum operatingtemperature40, 45, 50 or higher degree celsiusrelative humidity noncondensing at 40 deg c90, 95 or higher percentbuyer specificrequirementenvironmental test reportrequirementsnabattery test reportnaintended applicationsnetwork it equipmentother requirementsrohs compliancereports andcertificationagree to provide all relevantdocuments testreports/supporting document/reports etc to the buyer at thetime of bidding or on demandyesas per meity government ofindia guidelines ups shall havevalid bis crs certifications asapplicableyes for ups rating upto 10kva /speci cation t t /specificationname b b r r /bid requirementallowed valuesadditional specification parameters - online ups v2 3 pieces specification parameternamebid requirement allowed values1 power output wattage, 2ups type, 3 outputwaveform1 min. 700w, 2 online, 3 pure sine wave ac output, manual bypassfacility4battery voltage, 5 batterycapacity, efficiency4 12v/24v dc, 7ah - 18ah, 5 more than or equal to 85%6overload protection 7 allrequired specification6yes, with auto shutdown 7 all required specification as per scope of work* bidders offering must also comply with the additional specification parameters mentioned above. //n ; ^ n ; ^ /consignees/reporting officer and quantity5. .5. ./s.no. //n ; ^ n ; ^ /consigneereporting/officer /address /quantity; ; ; ; /deliverydays11 / 22 vc setup for mlaoffice/home indistrict neemuch 3ac, vc setup for mla office/homein district neemuch 3 ac3455. .5. ./s.no. //n ; ^ n ; ^ /consigneereporting/officer /address /quantity; ; ; ; /deliverydaysbuyer added bid specific additional scope of work5. .5. ./s.no.document titledescriptionn %n % 4 4 /applicable i.r.o. items1specificationdocumentviewspecification documentall in one pc v23the uploaded document only contains buyer specific additional scope of work and / or drawings for the bid items addedwith due approval of buyer s competent authority. buyer has certified that these additional scope and drawings aregeneralized and would not lead to any restrictive bidding.special terms and conditions-version:1 effective from 22-11-2024 for category video conferencingcamera / web camera v21. note to buyers:the central ministries/ departments and other government buyers, as applicable, shall note that thiscategory is covered under scheme - ii compulsory registration scheme of bis bureau of indianstandards.compulsory registration of goods / articles in this category shall conform to is 616: 2017 and shall bearthe standard mark under a license from bureau of indian standards as per scheme-ii of schedule-ii ofbureau of indian standardsconformity assessment regulations, 2018.buyer shall verify and confirm compliance with the applicable bis order during the procurement andfulfilment process.note to sellers:sellers shall offer and supply products conforming to the corresponding indian standard and mandatorilyregistration as per scheme-2 of bis.non-compliance shall result in action as per gem im policy.buyers and sellers may refer to the relevant s.o at https://www.bis.gov.in/product-certification/products-under-compulsory-certification/scheme-ii-registration-scheme/ special terms and conditions-version:2 effective from 16-10-2024 for category television tv v21. note to buyers:the central ministries/ departments and other government buyers, as applicable, shall note that thiscategory is covered under scheme - ii compulsory registration scheme of bis bureau of indianstandards.compulsory registration of goods / articles in this category shall conform to is 616: 2017 and shall bearthe standard mark under a license from the bureau of indian standards as per scheme-ii of schedule-iiof bureau of indian standardsconformity assessment regulations, 2018.12 / 22 buyer shall verify and confirm compliance with the applicable bis order during the procurement andfulfillment process.buyer shall validate and confirm the comprehensive warranty terms and conditions during theprocurement process. note to sellers:sellers shall offer and supply products conforming to the corresponding indian standard and mandatorilyregistration as per scheme-2 of bis.non-compliance shall result in action as per gem im policy.buyers and sellers may refer to the relevant s.o at https://www.bis.gov.in/product-certification/products-under-compulsory-certification/scheme-ii-registration-scheme/ special terms and conditions-version:3 effective from 26-03-2025 for category all in one pc v21. for buyers:1product verificationa unique device serial number shall be provided by the seller at the time ofsupply, which is mentioned on the product. the buyer/consignee shall beable to verify the complete product details, including configuration, throughthe oem website. the buyer/consignee should be able to perform theseverifications without needing to create an account on the oem website.13 / 22 .operating systema. there is no requirement that the oem of the all in one pc should be adevice partner of microsoft and holding a microsoft authorizationform maf from the software provider.b. microsoft os may be sourced directly from microsoft by oems holdingdevice partner status, and those not holding device partner statusmay source from authorized distributors, i.e., ingram/reddington andtheir authorized channel partners.c. buyers may ensure that maf shall not be made a mandatoryrequirement in bids.d. if supplies are made as per brands of oems who are global devicepartners, then the serial number of the machine supplied can be usedto check the details of the product from the website of the oem.e. in the case of local device partners of microsoft, os details such asthe digital key number should be produced with supplies, and thebuyer may verify them from microsoft.f. in case of other oems who are sourcing from authorized distributorsof microsoft, reddington, or ingram, a copy of the invoice whichcontains the relevant serial number of windows os shall besubmitted with supplies, and the buyer/consignee can verify the samefrom the os server website or by telephone, or both.g. in respect of verification of os, the consignee shall take necessarysteps at the time of acceptance. for device partner machines, buyerscan check the all in one pc oem website to verify the os by enteringthe pcs serial number and part code number. for entities that are notdevice partners and source os from distributors networks, they mayverify the serial number through the microsoft website or bytelephone, or both.h. in case the product offered is with a dos or linux operating system, such verification of os shall not be applicable.i. buyer shall request for windows hardware compatibility certificatefor window operating system to ensure the supply hardware iscompatible with windows operating system14 / 22 .requirement of oemlogobuyers are advised to note that incorporating a condition stipulating an oemlogo on the motherboard is restrictive and may not be incorporated into thebids.4.warrantya. the buyer may ensure that as soon as supplies are received, arequest for a warranty certificate is made, along with logging into theoem website/call center to verify the certificate.b. the product in gem marketplace direct purchase & l1 purchasecomes with a minimum standard warranty of one year. in case theseller has standard warranty more than one year, the same may bementioned in the catalogue including in the model name and in suchcase higher warranty offered shall prevail/supersede the minimumone year warranty.15 / 22 .om related to mii, localcontent and meityadvice on modeltechnical specificationsbuyers are requested to refer to various oms pertaining to dpiit and meity, as issued from time to time, while making procurement and follow relevantprovisions as applicable.6.check points duringacceptance of suppliesbefore generating the consignee receipt and acceptance certificate crac, the consignee may inspect the system condition and verify that it complieswith the agreed specifications and configurations. in the case of a largenumber of units to be procured, then the buyer may opt for bidding andaccordingly stipulate conditions regarding installation, inspection byconsignees/inspection agency. consignees who receive the supplies shouldbe vigilant and should complete checking to ensure that there is no scopefor the supply of refurbished products. at the time of receiving supplies, theconsignee may adhere to the following to ensure that any discrepancies insupplies can be flagged, taken into account, and reflected while generatingthe crac: i. packing should be checked properlyii. a warranty certificate from the oem should be insisted upon andchecked.iii. instruction manuals and the os installed should be checked.iv. the machine serial number should also be checked through settingsand can be verified from the oem website. the above points are forguidance, and the buyer/consignee may take steps consideredsuitable by them for checking at the consignee end beforeacceptance of systems.v. an escalation matrix for customer grievance redressal shall beinsisted upon by the buyer from the seller at the time of delivery.16 / 22 .hdd/ssd storageretentionbuyer may add their requirement of retention of securely store all hard diskdrives hdds or solid-state drives ssds used in the all in one pc underatc clause.for sellers:1.oem website link/partno for productverificationthe oem shall share the oem website link with the buyer at the time ofdelivery. the offered model details/configuration should be available ontheir website. a unique device serial number shall also be provided at thetime of supply, which is also mentioned on the product. the buyer/consigneeshall be able to verify the complete product details, including configuration, through the shared oem website link.2.changing or alteringthe configurationseller must refrain from changing or altering the configuration of the factorypre-loaded machine. the machine should be delivered to the consignee inits original, factory-approved configuration.3.warrantythe seller shall furnish a valid warranty certificate/tag from the oem to thepurchaser, guaranteeing the products coverage under the specifiedwarranty terms. the warranty certificate should be verifiable through theoem website/customer care center.4.compliance ofextended producer sresponsibilitywith effect from 1.4.23, as per the e-waste rules 2022, epr registration ismandatory for manufacturing entities. therefore, all oems shall hold validepr registration, and the registration number should be reflected in thecatalog parameter. oems shall ensure compliance with all responsibilities asper epr registration applicable from time to time.5.mandatory / statutoryrequirements asapplicableoems shall have to ensure compliance with the mandatory/statutoryrequirements as per the government of india notifications issued from timeto time for hardware and software components, as applicable.6.operating systemit shall be the responsibility of oems to ensure that supplies are made withgenuine operating systems. special terms and conditions-version:1 effective from 06-07-2022 for category online ups v21. in addition to general terms and conditions of gem, the following special t&c shall be applicable foronline ups version 2.0 with reference to installation and commissioning.sellers responsibility: installation and commissioning shall involve all the interconnections, any cablingbetween power source, switch boards within 3 metre range for input power and connecting output power17 / 22 in the scope of seller. buyers responsibility: buyer will ensure well ventilated/covered site/room having requisite powerpoints/distribution board to provide input power to ups as well as to take out power from ups within 3metre of the location of ups placement.the above is not applicable for the stores supplied without installation and commisioning.note: the above is indicative and any incidental requirement related to above responsibilities shall alsobe considered in the responsibilities of buyer/seller as applicable.5 5 : : a a/buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period theadditional time shall commence from the last date of extended delivery period. the additional deliverytime shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the originaldelivery period while exercising the option clause. bidders must comply with these terms.2. genericdata sheet of the products offered in the bid, are to be uploaded along with the bid documents. buyerscan match and verify the data sheet with the product specifications offered. in case of any unexplainedmismatch of technical parameters, the bid is liable for rejection.3. scope of supplyscope of supply bid price to include all cost components : supply installation testing andcommissioning of goods4. turnoverbidder turn over criteria: the minimum average annual financial turnover of the bidder during the lastthree years, ending on 31st march of the previous financial year, should be as indicated in the biddocument. documentary evidence in the form of certified audited balance sheets of relevant periods or acertificate from the chartered accountant / cost accountant indicating the turnover details for therelevant period shall be uploaded with the bid. in case the date of constitution / incorporation of thebidder is less than 3 year old, the average turnover in respect of the completed financial years after thedate of constitution shall be taken into account for this criteria.5. turnoveroem turn over criteria: the minimum average annual financial turnover of the oem of the offered productduring the last three years, ending on 31st march of the previous financial year, should be as indicated inthe bid document. documentary evidence in the form of certified audited balance sheets of relevantperiods or a certificate from the chartered accountant / cost accountant indicating the turnover details forthe relevant period shall be uploaded with the bid. in case the date of constitution / incorporation of theoem is less than 3 year old, the average turnover in respect of the completed financial years after thedate of constitution shall be taken into account for this criteria. in case of bunch bids, the oem ofcategory related to primary product having highest bid value should meet this criterion.6. certificatesbidders offer is liable to be rejected if they dont upload any of the certificates / documents sought in thebid document, atc and corrigendum if any.18 / 22 . certificatesiso 9001: the bidder or the oem of the offered products must have iso 9001 certification.8. service & supportavailability of service centres: bidder/oem must have a functional service centre in the state of eachconsignees location in case of carry-in warranty. not applicable in case of goods having on-sitewarranty. if service center is not already there at the time of bidding, successful bidder / oem shall haveto establish one within 30 days of award of contract. payment shall be released only after submission ofdocumentary evidence of having functional service centre.9. service & supportdedicated /toll free telephone no. for service support : bidder/oem must have dedicated/toll freetelephone no. for service support.10. service & supportescalation matrix for service support : bidder/oem must provide escalation matrix of telephone numbersfor service support.11. buyer added bid specific atcbuyer added text based atc clauses1. it must be noted that normally all correspondence and transactions will be made only with the parties w hose bid have been accepted and not with anybody else. consortium not allowed in any form.2. bidder has to submit technical compliance on oem letter head.3. the manufacturer of the all in one 4k usb video bar and cloud based platform for video conferencing should have at least five technical support personnel stationed directly in madhya pradesh to ensure prom pt technical assistance. official hr documentation is mandatory.4. the manufacturer of the all in one 4k usb video bar and cloud based platform for video conferencing must establish a direct/authorized service center in madhya pradesh to offer immediate support. valid do cumentation for service center must be provided on the oem letterhead.5. the manufacturer for the all in one 4k usb video bar and cloud based platform for video conferencing must have

Central Government/Public Sector

TRN :34891714 | 04 Aug, 2025

Tender Value : 0

Udhampur - Jammu And Kashmir

Tender for gem bids for entecavir, acotiamide 100mg tab, coloprep solution sodium sulfatepotassium sulfate and magnesium sulffate oral bowelpreparation solution each bowel preparation kit containstwo bottle of each with 177 ml of oral solution, entecavir1mg tab, mesalamine prolonged release granules 2gm, rapid urease test dry test kit, mesalamine enema 4gm per60ml, mesalamine prolonged release granules 1gm, mesalamine suppository 500mg, nitazoxanide 500 mg tab, pancreatic enzyme with a lipase content of 10000 to20000 units cap, pantoprazole 40mg plus amoxycilin750mg plus clarithromycin 500mg tab, rifaximine 400mgtab, sofosbuvir 400mg plus velpatasvir 100mg tab, balloon replacement tube brt 20 fr, balloon replacementtube brt 24 fr, biliary plastic double pigtail stent 7 fr x 7cm, biliary plastic double pigtail stent 7 fr x 10 cm, cystotome 10 fr, disposable plastic mouth guard, disposable colonoscopy shorts for colonoscopy, esophageal covered metallic stent with anti reflux valvesize 12 cm, endoscopic clip fixing for colonoscopy 240 cm, endoscopic clip fixing for endoscopy 160 cm, er cp guidewire tracer metro 0 point 025x450cm, er cp guide wiretracer metro 0 point 035 x450cm

Central Government/Public Sector

TRN :34891878 | 11 Aug, 2025

Tender Value : 0

Visakhapatnam - Andhra Pradesh

Tender for gem bids for entry and mid level desktop computer q2, computermonitor q2 . . % % 4 4 /mse exemption for years ofexperience and turnoverno& % & % . . % % 4 4 /startup exemption for years ofexperience and turnoverno -- 8 8 9 9 : : ; ; / minimum number ofbids required to disable automatic bidextension3 > > ; ;, , @ @ -- / / number of days for which bidwould be auto--extended7 b %b % : : /bid to ra enabledyesb %b % c c /ra quali cation ruleh1-highest priced bid elimination 4 4 /type of bidtwo packet bid4 4 f f /primary product categoryentry and mid level desktop computer g g & i & i /time allowed for technicalclarifications during technical evaluation2 days ; /bid number: gem/2025/b/6459939 /dated: 21-07-2025 & & / bid document1 / 14 q q 8 8 s s q q 4 4 / % % u > u > v v /inspection required byempanelled inspection authority / agenciespre-registered with gemno g g s s /evaluation methoditem wise evaluation/ w & w & /arbitration clauseno /mediation clauseno //bid details /emd detail 8 /requiredno /epbg detail 8 /requiredno /splitting / bid splitting not applied. /mii purchase preference /mii purchase preferenceno /mse purchase preference /mse purchase preferenceyes1. purchase preference will be given to mses having valid udyam registration and whose credentials arevalidated online through udyam registration portal as defined in public procurement policy for micro and smallenterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises andits subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail themselves of thepurchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders areexcluded from the purview of public procurement policy for micro and small enterprises and hence resellersoffering products manufactured by some other oem are not eligible for any purchase preference. in respect of bidfor services, the bidder must be the service provider of the offered service. relevant documentary evidence inthis regard shall be uploaded along with the bid in respect of the offered product or service and buyer will decideeligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 isnot an mse and mse seller s has / have quoted price within l-1+ 15% selected by buyer of margin ofpurchase preference /price band defined in relevant policy, such mse seller shall be given opportunity to matchl-1 price and contract will be awarded for 30% selected by buyer percentage of total quantity. the buyers areadvised to refer the om no. f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 forcompliance of concurrent application of public procurement policy for micro and small enterprises order, 2012and public procurement preference to make in india order, 2017. benefits of mse will be allowed only if seller is2 / 14 validated on-line in gem profile as well as validated and approved by buyer after evaluation of documentssubmitted. 2. estimated bid value indicated above is being declared solely for the purpose of guidance on emd amount andfor determining the eligibility criteria related to turn over, past performance and project / past experience etc.this has no relevance or bearing on the price to be quoted by the bidders and is also not going to have anyimpact on bid participation. also this is not going to be used as a criteria in determining reasonableness ofquoted prices which would be determined by the buyer based on its own assessment of reasonableness andbased on competitive prices received in bid / ra process. 3. reverse auction would be conducted amongst all the technically qualified bidders except the highest quotingbidder. the technically qualified highest quoting bidder will not be allowed to participate in ra. however, h-1will also be allowed to participate in ra in following cases:i. if number of technically qualified bidders are only 2 or 3.ii. if buyer has chosen to split the bid amongst n sellers, and h1 bid is coming within n.iii. in case primary product of only one oem is left in contention for participation in ra on elimination of h-1.iv. if l-1 is non-mse and h-1 is eligible mse and h-1 price is coming within price band of 15% of non-mse l-1v. if l-1 is non-mii and h-1 is eligible mii and h-1 price is coming within price band of 20% of non-mii l-1 g g g g / evaluation method item wise evaluation method contract will be awarded schedulewise and the determination of l1 will be done separately for each schedule.the details of item-consignee combination covered under each schedule are as under: g / evaluation schedules & / / item/category / quantityschedule 1entry and mid level desktop computer8schedule 2computer monitor15entry and mid level desktop computer 8 pieces i i /technical specifications* i / as per gem category speci cation /speci cation i i /specificationname 8 8 g g /bid requirementallowed valuesprocessordescription of storesdesktop computer with table mount monitor systemwith compatible chipset as per processor make withminimum 6 usb portcomputer typemid levelprocessor numberamd ryzen 5 5600g, intel core i5 12400 or highermotherboardexpansion slots pcie x 12 or higherexpansion slots m dot 2 forwifi1 or highergraphicsgraphics typeintegratedoperating systemfactory pre-loadedoperating system bydesktop oemwindow 11 professionalmemory ramram size memorycard/module in gbcapacity to be installed inthe system16, 32 or higher3 / 14 storagetype of storage installedwith the systemnvme-ssd plus hdd@7200 rpmssd - storage capacity ingb500, 512, 1024, 2048 or higherhdd - storage capacity ingb1000, 2000 or highercabinetbays for optical drive1optical drivedvd r/waudio interface typeuniversal 3.5 mm audio jack support for audio-in andaudio out, audio-in, audio-outportsnumber of usb type a portversion 2 point 04 or highernumber of usb type a portversion 3 point 2 gen 13, 4, 5, 6 or highernumber of usb ports type c1, 2 or highernumber of vga ports1 or highernumber of hdmi ports1 or highernumber of dp ports1 or highermonitoravailibility of monitoryes as per is 13252 part 1display technologyled backlit lcd liquid crystal displayscreen size in cms53.1 - 58 20.91 - 22.83, 58.1 - 63 22.87 - 24.8maximum resolution pixels1920 x 1080 full hdmonitor porthdmi, vgaintegrated webcam with micyes, noinput devicesmouse connectivityusb wired, wireless or higherkeyboard connectivityusb wired, wireless or highertype of keyboardstandardwarrantyon site oem warranty inyear3, 4, 5 or higher /speci cation i i /specificationname 8 8 g g /bid requirementallowed values //b y b y /consignees/reporting officer and quantity4 / 14 :. .:. ./s.no. //b y b y /consigneereporting/officer /address /quantity /deliverydays1adisekhar munga530031, central storesbuilding visakhapatnamsteel plant830computer monitor 15 pieces i i /technical specifications* i / as per gem category speci cation /speci cation i i /specificationname 8 8 g g /bid requirementallowed valuesstandardsdescription of storea monitor is an electronic visual display device thatoutputs the video signal generated by a computer. itis essentially a screen that shows text, images, andvideos, allowing users to interact with the computersgraphical user interface gui. it comes with a tablemount for support, a power cable and/or adapter, ports for connectivity and 1 year minimum on sitewarrantyconstructionpanel typein plane switching ips or higherdisplay technologyled backlit lcd liquid crystal displayscreen form factorflatdimensionmaximum resolutionpixels1366 x 768 hd, 1440 x 900, 1920 x 1080 full hdscreen size in cm48.1 - 53 18.94 - 20.87, 53.1 - 58 20.91 - 22.83brightness in nits301 to 350, 350 to 500 or higherconnectivity portsinput port1- hdmi port, 1- vga port //b y b y /consignees/reporting officer and quantity:. .:. ./s.no. //b y b y /consigneereporting/officer /address /quantity /deliverydays1adisekhar munga530031, central storesbuilding visakhapatnamsteel plant1530special terms and conditions-version:5 effective from 06-06-2025 for category entry and mid leveldesktop computer5 / 14 . for buyers:the category has been created in accordance with the model technical specification issued by theministry of electronics and information technology meity vide letter no. w-43/4/2020-iphw dated 19thaugust 2024, and is based on the parameters defined therein. the specifications applicable to thiscategory are as per the meity model technical specification dated 19th august 2024. accordingly, buyersshall not specify or mandate any particular processor, processor brand, or manufacturer in the additionalterms and conditions atc. in this context, reference may also be made to clause 2e of the gemgeneral terms and conditions gtc, which inter alia states: the specifications shall identify the keyparameters defining the products with all necessary validations related to configuration, type of data, restrictions, range / allowed values, allowed units etc. sellers as well as buyers while offering / buying thegoods / services shall have to comply with the validation rules / restrictions provided for in the categoryspecification. buyers / sellers cannot add parameters and / or drop down values not provided for incategory specification. in view of the above, buyers are not permitted to amend or modify any technicalspecification through the additional terms and conditions, and must ensure full compliance with thepredefined category specifications1productverificationa unique device serial number shall be provided by the seller at the time of supply, which is mentioned on the product. the buyer/consignee shall be able to verify thecomplete product details, including configuration, through the oem website. thebuyer/consignee should be able to perform these verifications without needing tocreate an account on the oem website.2operatingsystem1. there is no requirement that the oem of the desktop systems should be adevice partner of microsoft and holding a microsoft authorization form maffrom the software provider.2. microsoft os may be sourced directly from microsoft by oems holding devicepartner status, and those not holding device partner status may source fromauthorized distributors, i.e., ingram/reddington and their authorized channelpartners.3. buyers may ensure that maf shall not be made a mandatory requirement inbids.4. if supplies are made as per brands of oems who are global device partners, then the serial number of the machine supplied can be used to check thedetails of the product from the website of the oem.5. in the case of local device partners of microsoft, os details such as the digitalkey number should be produced with supplies, and the buyer may verify themfrom microsoft.6. in case of other oems who are sourcing from authorized distributors ofmicrosoft, reddington, or ingram, a copy of the invoice which contains therelevant serial number of windows os shall be submitted with supplies, andthe buyer/consignee can verify the same from the os server website or bytelephone, or both.7. in respect of verification of os, the consignee shall take necessary steps at thetime of acceptance. for device partner machines, buyers can check thecomputer oem website to verify the os by entering the pcs serial number andpart code number. for entities that are not device partners and source os fromdistributors networks, they may verify the serial number through the microsoftwebsite or by telephone, or both.8. in case the product offered is with a dos or linux operating system, suchverification of os shall not be applicable.9. buyer shall request for windows hardware compatibility certificate for windowoperating system to ensure the supplied hardware is compatible with windowsoperating system3requirementof oem logo buyers are advised to note that incorporating a condition stipulating an oem logo onthe motherboard is restrictive and may not be incorporated into the bids.6 / 14 processorsintel and amd processors are added as per model technical specification of desktopcomputer issued by ministry of electronics and information technology meity-iphwdivision w-43/4/2020 dated 19 aug 20245scope ofinstallationinstallation requirements shall be indicated in the bid by the buyer under theinstallation, commissioning and testing in bid ict clause. in case installation isspecified in the bid, it shall be the responsibility of the seller to ensure that allsystems are installed and satisfactory working is shown to the consignee orauthorized representative of the buyer. however, in case of direct and l1 purchase, installation of the computer system by the seller/oem is mandatory. installation doesnot include the supply of antivirus, ms office, etc., which are to be separatelyprocured by the buyer only.6buyer/consignee obligationsrelating toinstallationit is necessary that the buyer/consignee provide the seller or authorizedrepresentative access to locations, areas, or rooms for the installation of equipment.the seller or authorized representative will install systems and connect them toexisting power lines/networking at no additional charge. the buyer/consignee will beresponsible for electrical wiring, networking, or any other work connected to theinstallation area. the seller shall be only responsible for ensuring the setup of thedesktop systems, configuring, etc., as well as loading software etc. to be provided bythe buyer/consignee. any other site preparation required before installation andconnection of the desktop shall be the responsibility of the buyer/consignee. thebuyer/consignee, if required, will provide space at the installation site for the safestorage of tools, test equipment, and other materials used for installation at nocharge. in case there is a requirement of obtaining an entry pass for allowingrepresentatives to the premises, the same shall be arranged by the consignee.similarly, if there is a requirement of a gate pass for bringing items required forinstallation, the same is to be arranged by the consignee. in scenarios where multiplelocation installations are required, the buyer must indicate complete installationaddresses in the bid document. in the case of other modes of purchase, as soon asthe order is placed, complete details regarding installation may be informed to theseller. this ensures smooth coordination and delivery of products to the respectivelocations.7warrantythe buyer may ensure that as soon as supplies are received, a request for a warrantycertificate is made, along with logging into the oem website/call centre to verify thecertificate.8om related tomii, localcontent andmeity adviceon modeltechnicalspecifications buyers are requested to refer to various oms pertaining to dpiit and meity, as issuedfrom time to time, while making procurement and follow relevant provisions asapplicable.7 / 14 check pointsduringacceptance ofsupplies before generating the consignee receipt and acceptance certificate crac, theconsignee may inspect the system condition and verify that it complies with theagreed specifications and configurations. in the case of a large number of units to beprocured, then the buyer may opt for bidding and accordingly stipulate conditionsregarding installation, inspection by consignees/inspection agency. consignees whoreceive the supplies should be vigilant and should complete checking to ensure thatthere is no scope for the supply of refurbished products. at the time of receivingsupplies, the consignee may adhere to the following to ensure that any discrepanciesin supplies can be flagged, taken into account, and reflected while generating thecrac: i. packing should be checked properlyii. a warranty certificate from the oem should be insisted upon and checked.iii. instruction manuals and the os installed should be checked.iv. the machine serial number should also be checked through settings and canbe verified from the oem website. the above points are for guidance, and thebuyer/consignee may take steps considered suitable by them for checking atthe consignee end before acceptance of systems.v. an escalation matrix for customer grievance redressal shall be insisted uponby the buyer from the seller at the time of delivery.10hdd/ssdstorageretentionbuyer may add their requirement of retention of securely store all hard disk driveshdds or solid-state drives ssds used in the desktop computer under atc clause.11higherconfigurationthe buyer may permit products delivered with advanced usb standards. for example, a usb type-a 3.2 gen 2 port may be acceptable in place of usb type a port version3 point 2 gen 1 for seller:1oem websitelink/part nofor productverification the oem shall share the oem website link with the buyer at the time of delivery. theoffered model details/configuration should be available on their website. a uniquedevice serial number shall also be provided at the time of supply, which is alsomentioned on the product. the buyer/consignee shall be able to verify the completeproduct details, including configuration, through the shared oem website link.2changing oraltering theconfigurationthe seller must refrain from changing or altering the configuration of the factory pre-loaded machine. the machine should be delivered to the consignee in its original, factory-approved configuration.3warrantythe seller shall furnish a valid warranty certificate/tag from the oem to thepurchaser, guaranteeing the products coverage under the specified warranty terms.the warranty certificate should be verifiable through the oem website/customer carecentre.4compliance ofextendedproducer sresponsibilitywith effect from 1.4.23, as per the e-waste rules 2022, epr registration is mandatoryfor manufacturing entities. therefore, all oems shall hold valid epr registration, andthe registration number should be reflected in the catalog parameter. oems shallensure compliance with all responsibilities as per epr registration applicable fromtime to time.5mandatory /statutoryrequirementsas applicableoems shall have to ensure compliance with the mandatory/statutory requirements asper the government of india notifications issued from time to time for hardware andsoftware components, as applicable.6operatingsystem1. it shall be the responsibility of oems to ensure that supplies are made withgenuine operating systems.2. seller shall ensure to have windows hardware compatibility certificate forwindow operating systems8 / 14 scope ofinstallation it shall be the responsibility of the seller to ensure that all systems are installed, andsatisfactory working is shown to the consignee or authorized representative of thebuyer. however, in the case of direct and l1 purchase, installation of computersystem by the seller/oem is mandatory.8categoryspecification1. the seller may list products with advanced usb standards. for example, a usbtype-a 3.2 gen 2 port may be acceptable in place of usb type a port version3 point 2 gen 12. the supply of the monitor shall be in accordance with the parameteravailability of monitor. the details mentioned under description of storeregarding the monitor are applicable only if the monitor is being supplied.special terms and conditions-version:2 effective from 31-01-2025 for category computer monitor1. the product in gem marketplace direct purchase & l1 purchase comes with a minimum standard on sitewarranty of one year. in case the seller has standard warranty more than one year, the same may bementioned in the catalogue including in the model name and in such case higher warranty offered shallprevail/supersede the minimum one year warranty.: : v v \ \/buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period theadditional time shall commence from the last date of extended delivery period. the additional deliverytime shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the originaldelivery period while exercising the option clause. bidders must comply with these terms.2. buyer added bid specific atcbuyer added text based atc clauses1.material: procurement of desktop based programming hmi unit and monitor.please submit gem bid document duly stamped and signed .2.delivery schedule: as per bid document. however, rinl-vsp reserves the right to revise the delivery schedules, depending on vsp s production requirements and storage capacity, without any change in price, terms and conditions of po.3. rinl reserves the right to negotiate with the tenderers without prejudice to their quoted price.4. inspection: inspection at r.i.c. central stores department, r.i.n.l., visakhapatnam steel plant, visakhapatnam-530031, andhra pradeshtest certificate not applicable5.number of sources: 01 one :the intended number of source is one . however, the bid quantity may be split in two sources as per the mii and mse policy of buyer; subject to purchase preference to eligible mses and make-in-india suppliers; subject to matching l1 price by any of the tenderers from l2 onwards in the order of ranking. if none of the l2 tenderers onwards matches the l1 price, then full tendered quantity may be ordered on the l1 tenderer.6.purchase preference: purchase preference will be accorded to micro & small entrepreneurs mses/ssis and make in india class-1 local suppliers mii class-1 as per the prevailing orders / policy of govt. / rinl, subject to fulfillment of eligibility and submission of requisite / stipulated documents in support ofeligibility and subject to matching of l-1 lnip price. 7.conditions for availing benefit is detailed under cl.no. 8.0 of detailed terms and conditions of invitation to supply tender ref vsp s website: www.vizagsteel.com.9 / 14 .for the purpose of this bid, the order of preference public procurement policy ppp & make in india mii is as under:a local mses - till the total quantity on local mses equals or exceeds 50%.b aimses - till the total quantity on aimses including local mses equals or exceeds 25%.c mii class 1 local suppliers - till the total quantity on class 1 suppliers equals or exceeds 50% d others including mses/non mses/ mii/ non mii in the order of ranking9.price firmness: price shall be quoted in rs. per no. for supply on for vsp stores basis inclusive of material price, freight, transit insurance, taxes / gst, etc. and the price finalized shall remain firm till completion of supplies. gst shall be applicable on all penalties like liquidated damages, penalties for variation in material specification, risk purchase recovery, shortages, penalty for late lifting/ delivery, forfeiture of emd / pg bond/ security deposit etc if levied by the purchaser on the seller/supplier and shall be recovered along with gstapplicable thereon. the purchaser shall issue tax invoice in favour of the seller/supplier for such recoveries. 10.not-withstanding anything specified in this tender document, rinl at its sole discretion, unconditionally and without having to assign any reason, reserves to itself the right: to accept or reject the lowest priced tender or any other tender or all the tenders; to accept any tender in full or in part quantity; to reject the offers not conforming to the tender terms and to accord purchase preference to public sector undertakings wherever applicable as per government policy/ guidelines. to extend purchase preference to local & non-local ssis / mses micro and small enterprises, subjectto submission of documents as stipulated. 11.terms of payment: 100% payment of the value of each consignment shall be made against submission of bills along with vsp s acceptance garn goods acceptance / rejection note. payment shall be released on 60th day 21st day for local micro and small enterprises and 45th day for non-local mses, subject to submission of documents as stipulated for availing mse benefits from the date of acceptance of material at vsp i.e. garn date.payment shall be made by neft/rtgs mode or such other mode of electronic fund transfer offered by banks. tenderers must furnish the required bank account details to vsp in prescribed proforma so that the same can be updated in vsp s database. 12.emd and performance guarantee bond: not required 13.right to accept/reject offers:rinl/vsp does not pledge itself to accept the lowest priced offer or any other offer and reserves to itself the right of accepting the whole or any part of the tender/offer or portion of the quantity tendered and the tenderers bidders shall supply the same at the rate quoted.14.liquidated damages: shall be as per gem gtc clause no. 15. iii with following addition/modification: subject to a maximum of 10% of value of such consignments, excluding taxes. for levy of ld in case of late delivery, date of receipt of material by rinl-vsp stores along with necessary documents shall be considered as date of delivery, subject to acceptance of material by rinl-vsp after inspection. 15.establishment of credibility of non-enlisted/non-assessed vendors: if a tenderer who responds to this bid is presently not enlisted with rinl-vsp as an approved vendor, and/or those tenderers for whom vendor assessment is not done by gem for the category desktop based programming hmi unit and monitor, has to upload the following documents in the offer/bid in gem:notarized statutory manufacturing / service industry registration certificate, i.e., empartiiissuedbydic/nsicregistration certificate / udyog aadhar memorandum for the same/similar tendered itemsfor mses.ornotarized copy of certificate of registration of shops and establishments for a dea1er/agent/trader etc.or10 / 14 notarized copy of certificate of incorporation along with memorandum and articles of association of the private/public limited companies.ii notarized copy of proprietary/partnership deeds in case of proprietary/partnership firms.iii notarized copy of gst registration certificate and pan card copy in the name of company in case of limited companies or in the name of individuals in case of proprietary firms.iv self-attested financial worth and audited financial statements for the last three 3 years.v self-attested copies of purchase orders/contracts for the same or similar tendered item/s.vi self-certified iso certificate, if any.vendor assessment report has to be submitted by the bidders for whom vendor assessment is already done by gem for the category desktop based programming hmi unit and monitor16.bidder shall have minimum 20% domestic value addition class-i or class-ii local supplier as per orderno. p-45021/2/2017-pp be-ii dt. 04.06.2020 of dpiit, ministry of commerce, goi and shall submit declaration as per format at annexure-ii of this atc along with their techno-commercial bid. 17. documents to be uploaded: by the bidder/seller during bid participation in gem: this bid document, specification sheets, drawings, corrigendum if any, etc. duly signed and stamped by bidder on all pages, confirming acceptance. bidders must select the mse option to claim mse benefits while submitting the offer on gem itself and upload their udyam registration for same/

Central Government/Public Sector

TRN :34891893 | 11 Aug, 2025

Tender Value : 36.33 Lacs

Lucknow - Uttar Pradesh

Tender for gem bids for alliance balloon inflation device for endoscopic controlledradial expansion, automatic liver biopsy gun size 18g x 15cm, biliary balloon dilator hurricane outer diameter 6 10mm balloon length 4 cm, biliary dilatation cathetersohendra type 10 fr, biliary dilatation catheter sohendratype 7 fr, biliary dilatation catheter sohendra type 8pt5 fr, biliary dilatation catheter sohendra type 9 fr, biliarypigtail stent 10 fr x 10 cm, biliary pigtail stent 10 fr x 7 cm, biliary pigtail stent 7 fr x 7 cm, channel cleaning brush forendoscope 240 cm, double lumen wire guided biliarycytology brush, ercp guide wire jagwire 0pt035 x 450 cm, ercp guide wire visiglide 0pt025 x 450 cm straight, ercpsphincterotome tapertome double lumen sphincterotomy20mm knife, ercp sphincterotome tapertome doublelumen sphincterotomy 25mm knife, ercp sphincterotometritome dome tip 20 mm cutting wire sphincterotome, ercp sphincterotome ultratome xl triple lumen wireguided, ercp sphincterotome ultratome xl triple lumenwire guided, ercp sphincterotome ultratome xl triplelumen wire guided sphincterotomes, endoscopic clip fixingdevice, endoscopic haemostatic clip multiple readjustable360 degree rotatable, endoscopic ligation loop 40 mm, endoscopic variceal ligation system, endoscopic varicealligation system band cylinders for evl, endoscopic biliarystone removal balloon mutiple sizes, endoscopicsclerotherapy injector size 23g needle length 4 mm channel, endoscopy capsule for capsule endoscopy endoscopiccapsule compatible, esophageal covered metallic stent size14 cm, esophageal covered metallic stent size 15 cm, foreign body removal forceps basket type, multibite biopsyforceps length 160 cm, one action stent introducer system8pt5 fr 1 dcgi and usfda or ce 2 approved 2 one actionstent introducer system 8pt5 fr guiding catheter 05 frpushing catheter 8pt5 fr guiding catheter length 205 cm, one action stent introducer system 8pt5 fr 1 dcgi andusfda or ce 2 approved, one action stent introducersystem 10 fr 1 dcgi and usfda or ce 2 approved 2, percutaneous endoscopy gastrostromy set pull type size 24fr, percutaneous endoscopy gastrostomy set size pull type20 fr, radial jaw biopsy forceps length 160 cm, siliconspray, tannenbaum type plastic biliary stent 10fr x 10cm, tannenbaum type plastic biliary stent 10fr x 7cm, tannenbaum type plastic biliary stent 10fr x 8cm, tannenbaum type plastic biliary stent 10fr x 9cm, tannenbaum type plastic biliary stent 8pt5 fr x 10cm, tannenbaum type plastic biliary stent 8pt5 fr x 12cm, tannenbaum type plastic biliary stent 8pt5 fr x 7cm, tannenbaum type plastic biliary stent 8pt5 fr x 9cm, tannenbaum type plastic biliary stent with christmas treeflaps 10 fr x 12 cm, uncovered y type self expandingmetallic biliary stentalliance balloon inflation device for endoscopic controlledradial expansion, automatic liver biopsy gun size 18g x 15cm, biliary balloon dilator hurricane outer diameter 6 10mm balloon length 4 cm, biliary balloon dilator hurricaneouter diameter 6 10 mm balloon length 4 cm, biliarydilatation catheter sohendra type 10 fr, biliary dilatationcatheter sohendra type 10 fr, biliary dilatation cathetersohendra type 7 fr, biliary dilatation catheter sohendratype 7 fr, biliary dilatation catheter sohendra type 8pt5 fr, biliary dilatation catheter sohendra type 8pt5 fr, biliary

Central Government/Public Sector

TRN :34881444 | 14 Aug, 2025

Tender Value : 0

Pune - Maharashtra

Tender for gem bids for proc, 10633958 lv7t 816 10x10 993 100 990 0 housing 10326075 lv7t 816 443 612 070 0 foot brake valve4613190110 10337742 lv7t 816 990 301 082 0 crosspin gkn 701 549 10345074 lv7t 816 443 612 153 0 airdrier 4324210240 10313613 lv7t 816 993 050 347 0injector 10313571 lv7t 816 993 050 267 0 pump fuel 10348344 lv7t 816 443 312 040 0 rear combine lamprh zkw 891055 10348270 lv7t 816 443 312 041 0 rearcombine lamp lh zkw 891056 10348250 lv7t 816 336146 052 0 power steering pump uc 20 rl 55v 10634875 lv7t 816 10x10 1020076 switch assy manualoverride 10634868 lv7t 816 10x10 1028207a display 10634872 lv7t 816 10x10 1002688 resistor 10634869 lv7t 816 10x10 1000430a bracket 10634873lv7t 816 10x10 1019922 selector range 10338546lv7t 816 443 853 140 0 convoy switch v vs1012002021a8 vomc 10325129 lv7t 816 205 091 067 4thermometer insert 10325190 lv7t 816 993 100 8180 o seal h2927 38x4 fpm 2 70 10356334 lv7t 816 324545 047 0 needle bearing inahk 2016 10348122 lv7t816 443 400 415 0 t 816 pressure switch trw 151 012 10341847 lv7t 816 297 630 013 4 window regulator 10341794 lv7t 816 297 307 531 4 side indicator rh 10358621 lv7t 816 993 050 291 0 harness wring 10358100 lv7t 816 993 050 284 0 tube fuel supply 10336317 lv7t 816 298 932 075 4 short mudguard rh 10358643 lv7t 816 993 050 333 0 hose flexible 10313194 lv7t 816 993 050 027 0 sensor position 10565618 lv7t 816 443 400 622 0 torque converter td8flw 1754 1 bom 6731 10338392 lv7t 816 993 101 0530 generator h 821170 cir 28x80 swop 10565610 lv7t816 443 999 250 0 brake shoe pagid 12 999 562410x180 d 4 10348330 lv7t 816 443 120 001 0 fuel bid number gem2025b6462077 dated 17-07-2025 bid document1 146 cooler l and r 1230622 12 10323276 lv7t 816 993200 164 0 display 100504 10323288 lv7t 816 993 101169 0 thermostat 10327029 lv7t 816 207 033 373 4hose to uppper manifold 10323385 lv7t 816 993 200393 0 valve assy x226426p 10325223 lv7t 816 993 100778 0 lubricate oil line 10352683 lv7t 816 993 101195 0 turbo charger 10312431 lv7t 816 993 050 0320 sensor temprature 10316917 lv7t 815 993 050 3460 module elect control 10312492 lv7t 815 207 301268 4 king pin 10312513 lv7t 815 201 066 029 4 pumpbody 10312606 lv7t 815 273 110 390 0 sealing ring 10311202 lv7t 815 993 200 913 0 piston clutchassembly 10312107 lv7t 815 203 325 217 4 fuel tankholder 10312686 lv7t 815 207 390 080 4 servosteering cylinder cw joints 10317453 lv7t 815 207650 139 4 expansion tank 10323075 lv7t 815 201 062072 4 pump housing 10316923 lv7t 815 298 796 140 4step board bracket lh 10316926 lv7t 815 298 796141 4 step board bracket rh 10325347 lv7t 815 993200 672 0 sensor 10317301 lv7t 815 297 255 017 4rear mudguard 10316136 lv7t 815 207 590 142 4exhauht silencer 10322755 lv7t 815 207 924 049 4thermoplastic hose 10322582 lv7t 815 207 924 135 4hose 10314233 lv7t 815 4x4 107 111 142 000 split pin4x32 is549 74 steel 10313982 lv7t 815 4x4 286 121071 202 hose 7x0 5 346551 10326076 lv7t 815 4x4 443612 502 000 o ring wabco 897770250 4 10313846 lv7t815 4x4 442 051 361 644 plug m 42x2 10314180 lv7t815 4x4 107 112 175 000 clevis pin 10f8x28x24 is686373 10314210 lv7t 815 4x4 107 112 104 000 clevis pinb8 c11x56x53 is6863 73 10313628 lv7t 815 4x4 107338 125 016 split pin 2 5x16 is549 74 10314601 lv7t815 4x4 442 076 612 974 injector line 7 th cylinder 10311765 lv7t 815 4x4 107 520 612 080 clevis pinb12x80 is6862 2005 steel 10324673 lv7t 815 4x4 358821 001 000 electromagnetic valve erchem iv 24 v 10319478 lv7t 815 4x4 130 071 510 364 prismaticspring lh 10329902 lv7t 815 4x4 131 654 128 000hose ab 309 8x710 zvs pn 21310 10330057 lv7t 8154x4 131 654 130 000 hose ab 309 8x800 dkl dkl pnd21310 10317568 lv7t 815 4x4 273 127 033 160 rubberbushing 10319572 lv7t 815 4x4 283 322 001 000 hosethermotex 9 3 mm 10314732 lv7t 815 4x4 442 052 380154 centering screw 10319178 lv7t 815 4x4 442 071530 134 back pressure valve 10314699 lv7t 815 4x4442 052 381 784 wheel screw 10318031 lv7t 815 4x4442 070 400 704 fan 10319083 lv7t 815 4x4 442 071430 544 gear tube shift 10330077 lv7t 815 4x4 207264 022 4 satallite housing 10319058 lv7t 815 4x4202 051 028 4 rear axle shaft 10352364 lv7t 815 4x4992 100 839 000 steering gear box 10320188 lv7t815 4x4 442 900 190 000 air reservoir wabco9507400120 10331246 lv7t 815 4x4 442 017 280 524constant mesh gear 10335625 lv7t 815 hmv 6x6 442072 504 724 rear axle 1 10532845 lv7t 815 hmv 6x6319 232 066 000 gasket set 10336424 lv7t 815 hmv6x6 442 072 504 734 rear axle ii 10520407 lv7t 815hmv 6x6 442 070 830 254 piston cw cylinder 10518332 lv7t 815 hmv 6x6 442 972 401 714 tool box 10532209 lv7t 815 hmv 6x6 442 053 513 204 flange 10528281 lv7t 815 hmv 6x6 442 021 661 324 steeringlever 10531006 lv7t 815 hmv 6x6 443 612 003 000brake manual valve 961 702 011 0 10524571 lv7t 815hmv 6x6 442 948 580 114 front cover 10518009 lv7t bid details2 146 1 1 815 hmv 6x6 442 985 511 824, 10519194 lv7t 815 hmv6x6 990 100 901 000 cylinder head kit, 10516440 lv7t815 hmv 6x6 442 076 608 824 heater to tank, 10532610 lv7t 815 hmv 6x6 130 012 280 774 garhelical, 10521415 lv7t 815 hmv 6x6 549 452 024 000door lock, 10518069 lv7t 815 hmv 6x6 442 987 420894 instrumental panel, 10518142 lv7t 815 hmv 6x6443 522 036 0 heater 2n1 art 111 24v, 10522070 lv7t815 hmv 6x6 442 070 220 514 cooler body, 10521156lv7t 815 hmv 6x6 442 072 781 424 transfer gear box, 10516289 lv7t 815 hmv 6x6 442 075 300 124 exhaustbrake, 10517972 lv7t 815 hmv 442 985 510 974 carpet, 10520529 lv7t 815 hmv 9515 014119 front sheet lh, 10517324 lv7t 815 hmv 443 332 030 000 cover d4 67100, 10530831 lv7t 815 hmv 205 361 004 4 sealing ring, 10532278 lv7t 815 hmv 442 029 370 744 bearing, 10568998 lv7t 815 hmv 443 421 015 000 voltmeterd60 24vganz, 10531177 lv7t 815 hmv 443 612 196 0clutch booster, 10615264 lv7t 815 hmv 272 999 027000 door filling lh, 10515650 lv7t 815 hmv 443 935 020790 ring, 10531067 lv7t 815 hmv 443 612 218 0 releifvalve vpc 4a 7 4 bar, 10531379 lv7t 815 hmv 443 831019 000 electric wind screen apo, 10516399 lv7t 815hmv 442 075 911 704 tube rh, 10521222 lv7t 815 hmv442 072 511 184 housing i, 10520639 lv7t 815 hmv 442071 430 344 shifter rod, 10519615 lv7t 815 130 017260 234 reverse run gear, 10615327 lv7t 815 hmv482 hp 01007 arrangement of ballast boxes, 10516967lv7t 815 hmv 442 075 066 404 servo cylinder tie rod, 10615203 lv7t 815 hmv 482 hp 03057 cover assy, 10615262 lv7t 815 hmv 482 hp 03032 inner tube assy, 10526217 lv7t 815 hmv 990 100 848 000 neck 56294 15, 10523193 lv7t 815 hmv 482 eg 04048 storagebattery box, 10519470 lv7t 815 hmv 442 010 150 334lower cover, 10531088 lv7t 815 hmv 443 612 241 000filing connecting head 0484103106, 10612004 lv7t815 130 054 750 084 data plate, 10615017 lv7t 815324 933 001 000 needle ii 3 x 23 8 1 53 5, 10348214 lv7t815 5325 008623 clutch push button, 10317971 lv7t815 2930 002877 oil cooler, 10328318 lv7t 815 443611 010 000 clutch valve 611006002, 10324345 lv7t815 130 079 020 224 alternator connector, 10330360 lv7t 815 311 113 010 000 rivet 8x18 csn 022331 7, 10327161 lv7t 815 442 973 180 324 rear doorlh, 10315322 lv7t 815 2510 72 0150794 springassembly leaf 130 072 800 384, 10322464 lv7t 815131 857 042 078 fork, 10320287 lv7t 815 442 925 010064 cover of air duct lh, 10610126 lv7t 815 130 987420 954 instrument panel, 10610300 lv7t 815 130 987030 484 front cover lh, 10570757 lv7t 815 442 985510 204 carpet, 10589589 lv7t 815 130 989 020 424front mudguard rh flap, 10322984 lv7t 815 990 700006 000 frame, 10346815 lv7t 815 4820 72 0159602wrench open end 130 051 390 204, 10312292 lv7t 815547 605 910 6 prm 3192 superstructure for gear box, 10630145 lv7t 815 458 mf 01002 complete frameassy with bumper, 10614824 lv7t 815 442 976 670 024support filling, 10614854 lv7t 815 442 976 620 394 sidecushion lh, 10337642 lv7t 815 442 078 741 174 rearsheet rh, 10328939 lv7t 815 442 630 030 034 yokeseat, 10342121 lv7t 815 4730 077746 sleeve, 10319771 lv7t 815 990 100 948 000 rear cover0139221, 10570924 lv7t 815 485 sk 00109 set of sealsconsisting of 40 items, 10342939 lv7t 815 150 110 //bid details3 / 146 004 repair kit for servo steering cylinder, 10321014 lv7t 815 8x8 5440000210 rear step board, 10612353 lv7t 815 442 070 332 034 intake manifoldcentral, 10614750 lv7t 815 130 075 572 144 crossgirder, 10342993 lv7t 815 443 857 019 000 socket z044, 10614957 lv7t 815 634 413 203 055 door dropwindow glass, 10585501 lv7t 815 hmv 101 111 014 454sealing ring 95x3 hhs 02 23095h 5009 02, 10610732lv7t 815 8x8 634 413 203 045 door glass, 10331634lv7t 815 442 070 720 724 guide wheel intermediatepiece, 10317211 lv7t 815 990 100 902 000intermediate plate 960 6310, 10321797 lv7t 815 442929 440 034 screen holder, 10614869 lv7t 815 442025 490 114 engine brake body, 10614826 lv7t 815 442985 511 894 rear carpet lh, 10317050 lv7t 815 101 999034 000 upper intake manifold, 10323774 lv7t 815130 878 960 054 holder of spare conisters, 10328191 lv7t 815 442 999 271 000 pump cover, 10323822 lv7t 815 130 889 010 094 rear mud guardrh, 10615187 lv7t 815 hmv 442 079 014 024 conductor, 10615246 lv7t 815 hmv 614 336 720 000 roof panel lh, 10615247 lv7t 815 hmv 614 336 723 000 roof panel rh, 10615165 lv7t 815 hmv 442 928 490 064 frame, 10614757 lv7t 815 442 074 918 534 air manifold, 10614926 lv7t 815 442 075 410 174 air reservoir holder, 10527081 lv8ad iibeml 2asj3423 lowering valvev03020752004, 10529398 lv8ad iibeml 1600027transfer valve vpe 20as vo1170322004, 10334581lv7av 15 578 903 911 852 34 upper case assy, 10334973 lv7av 15 153986 carrier, 10313558 lv7av 15578 003 919 352 26 connecting cable, 10311914lv7av 15 578 003 914 352 28 rope sling 4x1600 kg, 10314018 lv7av 15 578 903 910 452 80 sensing devicepull of rope, 10347024 lv7av 15 574 912 000 901fastening strip dynamo, 10334957 lv7av 15 358 122220 100 switch, 10344603 lv7av 15 578 003 103 052 16shaft, 10334930 lv7av 15 153987 carrier, 10329005lv7hrv av 15 578 003 103 652 43 carrier, 10347294lv7av 15 578 903 911 552 62 gear twin pump, 10326371 lv7av 15 578 003 001 752 65 ring, 10565098lv7av 15 574 715 610 000 lamp, 10565105 lv7av 15153886 flange for gr 089, 10344954 lv7av 15 443 132178 020 fan d 80 od 500326, 10521374 lv7av 15 dp av033 assembly fixture for assembling the, 10521549lv7av 15 dp av 048 connections for pressure testof the, 10332860 lv7av 15 339 544 344 702 brake 4 80, 10334925 lv7av 15 358 349 051 421 registercircular 2 8 a pk5 160hm, 10344721 lv7av 15 578 003101 852 34 packing, 10328344 lv7av 15 578 003 114552 43 covering guide, 10314001 lv7av 15 578 003920 952 33 wire no 309, 10531542 lv7t 815 hmv 443839 009 000 electronic cooling regulator jw 25 003, 10334215 lv8pinakalcr z 9632000229 repair kitcompr items marked with, 10334212 lv8pinakalcrz9372010247 lift cylinder seal kit, 10334302lv8pinakalcr z 9372010273 repair kit compr itemsmarked with, 10345945 lv8pinakalcrtil z7978000082cable 12 g 0 75 olfl classic 400 p lpp, 10622236lv8pinakalcrtil 109 200 090 513 pinaka launchertarpauline coverslv7/t-816 10x10 993-100-990-0 housing, lv7/t-816443-612-070-0 foot brake valve 4613190110, lv7/t-816990-301-082-0 cross pin gkn 701 549, lv7/t-816 443-612-153-0 air drier 4324210240, lv7/t-816 993-050-347-0 injector, lv7/t-816 993-050-267-0 pump fuel, lv7/t-816 443-312-040-0 rear combine lamp rh zkw 891055, //bid details4 / 146 lv7/t-816 443-312-041-0 rear combine lamp lh zkw891056, lv7/t-816 336-146-052-0 power steering pumpuc 20 rl 55v, lv7/t-816 10x10 1020076 switch assymanual override, lv7/t-816 10x10 1028207adisplay, lv7/t-816 10x10 1002688 resistor, lv7/t-81610x10 1000430a bracket, lv7/t-816 10x10 1019922selector, range, lv7/t-816 443-853-140-0 convoyswitch v.vs10 12002021a8 vomc, lv7/t-816 205-091-067-4 thermometer insert, lv7/t-816 993-100-818-0 o-seal h2927-38x4-fpm-2-70, lv7/t-816 324-545-047-0needle bearing inahk 2016, lv7/t-816 443-400-415-0 t-816 pressure switch trw 151.012, lv7/t-816 297-630-013-4 window regulator, lv7/t-816 297-307-531-4side indicator rh, lv7/t-816 993-050-291-0 harnesswring, lv7/t-816 993-050-284-0 tube fuel supply, lv7/t-816 298-932-075-4 short mudguard rh, lv7/t-816 993-050-333-0 hose flexible, lv7/t-816 993-050-027-0 sensor position, lv7/t-816 443-400-622-0 torqueconverter td 8flw 1754-1 bom 6731, lv7/t-816 993-101-053-0 generator h 821170 cir 28x80 swop, lv7/t-816443-999-250-0 brake shoe pagid 12 999 562 410x180 d4*, lv7/t-816 443-120-001-0 fuel cooler l and r1230622-12, lv7/t-816 993-200-164-0 display 100504, lv7/t-816 993-101-169-0 thermostat, lv7/t-816 207-033-373-4 hose to uppper manifold, lv7/t-816 993-200-393-0 valve assy x226426p, lv7/t-816 993-100-778-0lubricate oil line, lv7/t-816 993-101-195-0 turbocharger, lv7/t-816 993-050-032-0 sensor temprature, lv7/t-815 993-050-346-0 module elect control, lv7/t-815 207-301-268-4 king pin, lv7/t-815 201-066-029-4pump body, lv7/t-815 273-110-390-0 sealing ring, lv7/t-815 993-200-913-0 piston clutch assembly, lv7/t-815 203-325-217-4 fuel tank holder, lv7/t-815207-390-080-4 servo steering cylinder c/w joints, lv7/t-815 207-650-139-4 expansion tank, lv7/t-815 201-062-072-4 pump housing, lv7/t-815 298-796-140-4 stepboard bracket lh, lv7/t-815 298-796-141-4 step boardbracket rh, lv7/t-815 993-200-672-0 sensor, lv7/t-815297-255-017-4 rear mudguard, lv7/t-815 207-590-142-4exhauht silencer, lv7/t-815 207-924-049-4thermoplastic hose, lv7/t-815 207-924-135-4 hose, lv7/t-8154x4 107-111-142-000 split pin 4x32 is:549-74steel, lv7/t-8154x4 286-121-071-202 hose-7x0.5346551, lv7/t-8154x4 443-612-502-000 o ring -wabco 897770250.4, lv7/t-8154x4 442-051-361-644plug m 42x2, lv7/t-8154x4 107-112-175-000 clevis pin10f8x28x24 is:6863-73, lv7/t-8154x4 107-112-104-000clevis pin b8 -c11x56x53 is:6863-73, lv7/t-8154x4107-338-125-016 split pin 2.5x16 is:549-74, lv7/t-8154x4 442-076-612-974 injector line 7 th cylinder, lv7/t-8154x4 107-520-612-080 clevis pin b12x80is:6862-2005 steel, lv7/t-8154x4 358-821-001-000electromagnetic valve erchem iv- 24 v, lv7/t-8154x4 130-071-510-364 prismatic spring lh, lv7/t-8154x4 131-654-128-000 hose - ab 309 8x710 zvs pn21/310, lv7/t-8154x4 131-654-130-000 hose-ab 3098x800 dkl-dkl pnd 21/310, lv7/t-8154x4 273-127-033-160 rubber bushing, lv7/t-8154x4 283-322-001-000hose- thermotex 9-3 mm, lv7/t-8154x4 442-052-380-154 centering screw, lv7/t-8154x4 442-071-530-134back pressure valve, lv7/t-8154x4 442-052-381-784wheel screw, lv7/t-8154x4 442-070-400-704 fan, lv7/t-8154x4 442-071-430-544 gear-tube shift, lv7/t-8154x4 207-264-022-4 satallite housing, lv7/t- //bid details5 / 146

State Government

TRN :34866835 | 07 Aug, 2025

Tender Value : 0

Visakhapatnam - Andhra Pradesh

Tender for gem bids for surgical, surgical items, iv catheter, iv cannula, angiographyprocedure, microcatheter, venous catheter, polyvinylalcohol microspheres, polycarbonate syringe, biopsyneedle, embolization coil, drainage catheter, ablationprobe, gastrostomy tube, ablation electrode, gastrostomyfeeding tube, placement kit, guide wire

Related Searched Keywords : wire guide

List of wire-guide Tenders

Get wire guide Tender Alert...

Related Searched Keywords : wire guide

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us