Filters

List of woven-bag Tenders

List of latest woven-bag Tenders in Indian Tenders. Click on any woven-bag Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for woven-bag Tenders.

All-Tenders (8)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :49051926 | 16 May, 2025

Tender Value : 30.36 Lacs

Panaji - Goa

Tender for construction of hall and supplying gym items for pinto youth club of baradi in velim constituency under mla-lad scheme.--demolishing laterite stone masonry in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead. 2 demolishing cement concrete 1:3:6 or richer mix including disposal of material within 50 m lead. 3 laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement. 4 extra for laterite masonry in all sizes in superstructure from floor i level upto floor v level. 5 12mm cement plaster 1:4 (1 cement : 4 fine sand) 6 providing and fixing 1st quality ceramic glazed wall tiles (johnson somany kajaria ) conforming to is:15622 (thickness to be specified by the manufacture of approved make in all colours shades except burgundy bottle green black of any size as approved by engineer-in-charge in skirting risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @3.3kg per sq.m including pointing in white cement mixed with pigment of matching shade complete.;wall ceramic glazed tiles : 300 x 600 7 providing and and laying antiskid floor tiles 12 x 12 upto 16 x 16 in of johnson somany kajaria (thickness to be specified by the manufacturer) of 1st quality conforming to is: 15622 of approved make in shades as specified laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete;dark shades 8 proving and fixing white vitreous china wall hung type (european type) water closet with seat and lid with c.i. brass hinges and rubber fittings with flush valve nelson/ similar fully chromium plated with stop cock wall flanges flush pipe or elbow and vaccum breaker coupling etc. including chair bracket/rag bolts cutting & making good the walls and floors where required and concealed seat support - w.c. pan with white plastic seat and lid 9 providing and fixing brass stop cock (heavy) of approved quality :;15 mm nominal bore 10 providing and fixing brass full way valve (heavy) duty with wheel of approved quality :;20 mm nominal bore 11 providing and fixing p.v.c. connection pipe with brass unions 15 mm nominal bore:;45 cm (18”) length . 12 providing and fixing rigid pvc s.w.r. (soil waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:; 110 mm dia 13 providing and fixing rigid pvc bend (approved make) for s.w.r. pipes including lubricating etc complete bend with door :; 100 mm dia 14 providing and fixing nahani trap of rigid pvc (approved make ) for s.w.r. pipes including lubricating etc complete without door :;110 mm dia 15 providing and fixing nickel chrome plated copper alloy fancy bib cock short body jaquar make or equivalent.confirming to is 8931; 1993;15mm nominal bore 16 providing and fixing chlorinated ployvinyl chloride (cpvc) pipes confirming to is:15778 having thermal stability for hot and cold water supply including all cpvc plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. this includes jointing of pipes and fittings with one step cpvc solvent cement and testing of joints complete as per direction of the engineer-in-charge. concealed work (medium duty sdr 13.5 pipe) including cutting chases and making good the walls etc.;20 mm dia nominal outer dia pipes. 17 providing and fixing hand shower (health faucet) with 8mm dia abs/brass body with double lock 1.00 m long flexible tube (brass plated stainles steel flexible hose) and wall hook of approved quality confirming to is standards. 18 frp (fiber reinforced polymer) frames with wood finish manufacture supply and installation (with anchor fastener) of epee or equivalent goan make frp (fiber reinforced polymer) frame of cross section as per options below with right angle joint and frp (fiber reinforced polymer) laminate made from 450 grams per sq.mts (gsm) chop strand glass fiber (matt) and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps). the core of frame would be filled with seasoned wood as infill material. the slot of frame for door resting will be of suitable width so as to take specified thickness door.the frame will be water proof as well as mild acid/ alkali resistant manufactured in an iso 9001- 2015 certified company.;specified cross section;4” x 2” 19 wood finish wood core frp (fiber reinforced polymer) door shutter. manufacture supply and installation (including accessories as mentioned below) of epee or equivalent goan make frp (fiber reinforced polymer) door shutter of specified thickness as per options below by using tray system with seasoned hard wood moisture less than 17% wooden styles for top rail and lock rails. frp (fiber reinforced polymer) laminate made up of 450 grams per sq.mts (gsm) chop strand matt and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps) and printed matt having wooden textures used along with uv resistant resin to give the clear texture on the door. the core of shutter will be filled with mr 2nd grade block board. the shutter to be water proof as well as mild acid / alkali resistant manufactured using rv tifac (r v engineering college bangalore & technology information forecasting & assessment council) technology in line with is 13034 1990 test standard in an iso 9001 – 2015certified factory. accessories: i) s. s. hinges 4” - 3 nos ii) s. s. latch - 1 no iii) tower bolt 5” - 2 nos iv) handle 5” - 2 nos;shutter thickness;32mm 20 providing and applying white cement based putty of average thickness 1.00 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete. 21 applying one coat of cement primer of approved brand and manufacture on wall surface. 22 wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade. 23 painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade. 24 applying priming coat with ready mixed primer of approved brand and manufacture on steel work. 25 providing flat iron hold fast 40 cm including fixing to frame with 10 mm dia bolts nuts and wooden plugs and embeded in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6 stone aggregate 20 mm nominal size.;40 x 3 mm flat iron hold fast 15 cm long 26 providing and fixing m.s. grill of required pattern in wooden frames of windows etc. with m.s. flats square or round bars with round headed bolts and nuts or by by screws.; plain grill 27 centering & shuttering including strutting propping & removal of forms for :;columns piers pillars aburments posts and struts (square rectangle polygon in plan) 28 centering & shuttering including strutting propping & removal of forms for :;sides and soffits of beams beam haunchings cantilever girders bressumers and lintels plinth beams not exceeding 1m in depth 29 centering & shuttering including strutting propping & removal of forms for :;suspended floors roofs landings shelves & their supports 30 providing and fixing 18 mm thick gang saw cut mirror polished premoulded and prepolished machine cut for kitchen platforms vanity counters window sills facias and similar locations of required size approved shade colour and texture laid over 20 mm thick base cement mortar 1: 4 (1 cement : 4 coarse sand) joints treated with white cement mixed with matching pigment epoxy touch ups including rubbing curing moulding and polishing to edges to give high gloss finish etc. complete at all levels.granite of any colour and shade area of slab over0.50 sqm;jet black 31 providing and laying in position machine batched concrete (bmc) machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to the site of laying but excluding the cost of centering shuttering finishing and reinforcement including admixtures in recommended proportions as per is 9103 to accelerate retard setting of concrete improve workability without impairing the strength and durability as per the direction of the engineer-in-charge. m25 grade of reinforced cement conrete by using 410kg of cement per cu.m. of concrete. all works upto floor v level. 32 providing tmt steel reinforcement bars of (sail tata. vizag jsw steel ltd.) ) (confirming to is 1786 of 1986) for rcc work (conforming to i.s. 1786 of 1986) including bending binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member. 33 providing and fixing anodised aluminium shutters in accordance with the specification annexed herewith including transportation, scaffolding and handling etc. complete as per direction of the engineer-in-charge: windows with three sliding shutters using 18 mm series shutters section.;plain glass 34 extra for powder coating with pure polyester powder of shade of required colour on the aluminium section 35 providing and fixing vitreous china wash basin with rs or c.i. brackets painted white 15 mm c.p. brass pillar taps c.p. brass chain with rubber plug 32 mm c.p. brass waste of pattern 32 mm diameter m.i. or c.p. brass trap and union complete including cutting and making good the walls where required.; flat back wash basin size 550 x 400mm with a single 15 mm c.p. brass pillar taps. 36 providing and laying in position cement concrete 1: 2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering shuttering and finishing :;all works upto plinth level 37 providing and fixing astm upvc pipe conforming to astm 2467 with iso 14001 including all upvc plain & brass threaded fittings including jointing of pipes & fittings with one step upvc solvent cement trenching refilling & testing of joints complete as per direction of engineer. external work.;sch-80(blue)/(w hite);40mm outer dia. 38 providing and fixing g.i. chain with g.i. pull. 39 providing woodwork in frames of doors windows clerestory windows trusses & other frames wrought framed and fixed in positon.;second class indian teak wood 40 providing and fixing 38 mm thick panelled glazed or panelled and glazed shutters for doors windows and clerestory window including black enamelled iron butt hinges with necessary screws:;second class indian teak wood 41 applying priming coat with ready mixed primer of approved brand and manufacture on wood work complete. 42 painting two or more coats (excluding priming coat) with superior quality ready mixed paint for wood work of approved brand & manufacture in all shades on new work to give an even shade. 43 providing & fixing chromium plated brass tower bolts (barrel type) with necessary screws complete.;250 x 10 mm 44 providing and fixing chromium plated brass sliding door bolt with bolts nuts and screws etc. complete.;300 x 16 mm 45 provided and fixing 150 mm chromium plated brass floor door stopper with rubber cushion screws etc. to suit shutters thickness complete. 46 provided and fixing chromium plated brass 100mm. mortice latch and a pair of levers and handles with necessary screws etc. complete (indian make of approved quality). 47 providing and and laying vitrified floor tiles in different sizes of johnson somany kajaria (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigment etc. complete;600 x 600 mm light shades 48 false ceiling:-;providing & fixing false ceiling yashashri make or equivalent made out of 2” x 1” m.s sq tube frame support structure & 20mm x 155mm x 1.2mm multi- cavity upvc section 30mm x 40mm x 2mm upvc multi-cavity section with hidden screwing system.the average weight of false ceiling is 8.50 kg per sq mtr. these upvc sections are tested by using bs 2782 & din 53459 test methods. 49 providing & fixing of aluminium lay-in perforated tile ceiling on 24 /14 mm ‘t’ framework of module 600mm x 600mm. tiles of size 575mm x 575mm / 584mm x584mm made out of 0.6mm thick aluminium. perforation of the tiles shall be 2.5mm dia 5.5mm c/c. the tile shall be manufactured on advanced equipment which includes several levelling. the tile end shall be raised upward by 38mm and bend outward to lay the tile in framework. the tile shall be polyester based powder coated in white colour. grid system for fixing ceiling tiles shall comprise of tees. the 24 /14 mm main tee runners shall be suspended at an interval of 1200mm centre to centre. the 24 /14 mm cross tee runner shall be suspended at 600mm centre to centre and further supported with 24 /14 mm cross tee at 600mm centre to centre with interlocking arrangements to form grid of 600mm x 600mm. the main tee shall be supported by means of 4mm g.i. rod from slab/roof. the suspension shall be provided at 1200 to 1500mm centre to centre.tee framework would be made of gi and powder coated. acoustic felt: non- woven felt made of glass-r einforced fibre glued over the perforation for sound absorption. 50 providing water proofing treatment over the new r.c.c. roofs terrace toilet by spreading cement slurry over the r.c.c. slab and laying of 10cms. average laterite stone ballast coba with the necessary gradient for easy flow of rain water and the coba in covered with damp proof of hindustan water proofing co. or equivalent jointless water proofing plaster of mix 1:3 ( 1 cement : 3 find sand) finished smooth with wooden trowel with false marking of 30 cms square. the vertical surface of the adjoining walls are to be treated upto a height of 30cms including rounding of junction (the rate includes for complete items including labour and materials and including cost of initial treatment of roof slab as follows. the injunction of damp proof or equivalent compound with cement solution will be given as and when found necessary for filling honey comb cracks etc. in the r.c.c. slabs). note: cement consumption 25 kg/sq.m. 51 providing & fixing colour coated alluminium (puf) sandwich panel roofing systems of approved make adhering to aluminium 3105 grade for top & bottom sheet of thickness0.40 & 0.35 respectively including puf insulation betewwn the top & bottom sheet of denslity 40 (+/-2) kg/m3 inclusive of s.s. 304 grade self tapping fastneres complete as directed by enigneer incharge (frame work for roof roof accesorries to be paid seperately) for tile design puf roof panel gutter width should be atleast 25% more than the crest width. minimum height at heighest point of crest should be minimum 65mm. minimum thickness at anygiven point should not be below 30mm.;puf insulated tile roof 30mm thick of trapezoidal design 52 steel work in built up tubular (round square or rectangular hollow tubes etc.) (square hollow section (shs) is4923 /rectangular hollow section (rhs) is4923/circular hollow section (chs) is1161 closed structural steel of (sail tata. vizag jsw apollo steel ltd.) make (min yeild stress 310 mpa)) trusses etc. including cutting hoisting fixing in position and applying a priming coat of approved steel primer including welding and bolted with special shaped washers etc. complete. 53 providing and fixing in position s.s. hand rail in main stair case and landing as per approved design shown in the drawing including bending handrail pipe to proper shape in curves with specials etc. complete. 54 melamine polishing on wood work (one or more coat);glossy 55 providing and fixing anodised aluminium shutters in accordance with the specification annexed herewith including transportation, scaffolding and handling etc. complete as per direction of the engineer-in-charge: adjustable louvered window s.;figured glass 56 extra for powder coating with pure polyester powder of shade of required colour on the aluminium section 57 6mm cement plaster to ceiling 1: 3 (1 cement : 3 fine sand) 58 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge. 59 painting three or more coats with acryllic exterior paint of approved brand and manufacture (such as dulex/ asian paints/ sherwin willians) including applying one coat of cement primer and one coat of surface treatment etc. complete. 60 painting one or more coats of acryllic exterior paint of approved brand and manuf acture(such as dulex/ asian paints/ sherwin willians) on old work including cleaning the surface with water etc. complete. 61 providing & fixing alluminium ridge of approved make adhering to alluminium 3105 grade of 0.71mm thickness & 60 cm wide inclusive of ss304 grade self tapping fastners to match the alluminium roofing system & as directed by engineer in charge complete 62 providing & fixing alluminium 30mm trapezhoidal end cap for puf roofing of approved make of alluminium aa 3105 grade matching with 30mm puf panel profile including the required fastners etc. complete for alluminium puf roofing system & as directed by engineer in charge. 63 pvc wall paneling : providing and fixing pvc sheet wall paneling of thickness 5mm (±0.25) consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5mm (±0.25) thick prelam pvc sheet.the panel & strips shall be of 600 kg/cbm density manufactured by an iso-9000 certified company. the strips should have in their center a grove of 6mm width and 1mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 10” between two pvc strips. the pvc strips shall be fixed to the wall using 65mm long m.s. screws through the groove in the strip by using pvc fasteners. the distance between two screws shall not be more than 200mm. a groove of 2mm may be left at the joint of two panels for aesthetic looks. the exact size of the panel and correspondingly of the grid may vary depending on the size of the wall.optionally a strips of 5mm (±0.25) thick pvc sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined using solvent cement. 64 providing and installing rubber dumbells of hexagonal shape and approved make including all material, labour, transportation, etc. complete as directed by engineer in charge. 65 providing and installing barbell rod 5ft of approved make including all material, labour, transportation, etc. complete as directed by engineer in charge. 66 providing and installing skipping rope of approved make including all material, labour, transportation, etc. complete as directed by engineer in charge. 67 providing and installing yoga mat 6mm thick of approved make including all material, labour, transportation, etc. complete as directed by engineer in charge. 68 providing and installing punching bag of 900mm diameter of approved make including all material, labour, transportation, etc. complete as directed by engineer in charge. 69 providing and installing bench press multidegree of approved make including all material, labour, transportation, etc. complete as directed by engineer in charge. 70 providing and installing rowing machine of approved make including all material, labour, transportation, etc. complete as directed by engineer in charge. 71 providing and installing rubber plates of approved make including all material, labour, transportation, etc. complete as directed by engineer in charge. a)2.50 kg 72 providing and installing rubber plates of approved make including all material, labour, transportation, etc. complete as directed by engineer in charge. b) 5.00 kg 73 providing and installing rubber plates of approved make including all material, labour, transportation, etc. complete as directed by engineer in charge. c) 7.50 kg 74 providing and installing rubber plates of approved make including all material, labour, transportation, etc. complete as directed by engineer in charge. d)10.00 kg 75 providing and installing rubber plates of approved make including all material, labour, transportation, etc. complete as directed by engineer in charge. e)12.50 kg 76 providing and installing rubber plates of approved make including all material, labour, transportation, etc. complete as directed by engineer in charge. e) 15.00kg 77 providing and installing dumbell rack of approved make including all material, labour, transportation, etc. complete as directed by engineer in charge. 78 providing and installing kettle bell of approved make including all material, labour, transportation, etc. complete as directed by engineer in charge. a) 2.00 kg 79 providing and installing kettle bell of approved make including all material, labour, transportation, etc. complete as directed by engineer in charge. b) 4.00 kg 80 providing and installing kettle bell of approved make including all material, labour, transportation, etc. complete as directed by engineer in charge. c) 6.00 kg 81 providing and installing kettle bell of approved make including all material, labour, transportation, etc. complete as directed by engineer in charge. d) 8.00 kg 82 providing and installing kettle bell of approved make including all material, labour, transportation, etc. complete as directed by engineer in charge. e) 10.00kg 83 providing and installing gym ball 65cms of approved make including all material, labour, transportation, etc. complete as directed by engineer in charge. 84 providing and installing gym ball 75cms of approved make including all material, labour, transportation, etc. complete as directed by engineer in charge. 85 providing and installing push up bar with chrome finish of approved make including all material, labour, transportation, etc. complete as directed by engineer in charge. 86 providing and installing ab wheel roller finish of approved make including all material, labour, transportation, etc. complete as directed by engineer in charge. 87 providing and installing foam roller finish of approved make including all material, labour, transportation, etc. complete as directed by engineer in charge. 88 providing and installing air bike of approved make including all material, labour, transportation, etc. complete as directed by engineer in charge.

Government Departments

TRN :49056686 | 23 May, 2025

Tender Value : 0

West Tripura - Tripura

Tender for expression of interest for empanelment as a registered vendor under the tripura small industries corporation limited for organizing different types of short term skill development training programmes in any part of tripura as follows: 1) food processing, 2) custom jewelry making, 3) file cover with board, envelope, paper bag making, 4) tailoring / dress making, 5) decorative candle making, 6) make up beauty parlour, 7) mobile repairing, 8) pc hardworking & networking. 9) soft toy making, 10) making of biodegradable non-woven bags etc

corporations/Associations/Others

TRN :49061687 | 29 May, 2025

Tender Value : 0

Sonbhadra - Uttar Pradesh

Tender for tender for annual maintenance of ash dyke of obra thermal power station. - earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. all kinds of soil 2 excavation work by mechanical means (hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. ordinary rock 3 filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 4 filling of empty jute/plastic bag in full with full stitching with nylon thread and stacking in crate from any where inside/outside ash pond including cost of all labour, material, t&p etc. 5 filling with 50kg. earth 6 filling with 50kg. ash 7 clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. 8 surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. all kinds of soil. 9 providing & making gabion structure with mechanically woven double twisted hexagonal shaped wire mesh gabion boxes as per is 16014:2012,morth clause 2500, of required size, mesh type 10x12(d=100 mm with tolerance of ±2%), zinic+10% al alloy+pvc coated, mesh wire diameter 2.7/3.7mm (id/od), mechanically edged/ selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2/3.2mm(id/od), supplied @3% by weight of gabion boxes, filled with boulders with least dimension of 200 mm, as per drawing, all complete as per directions of engineerin-charge. 10 random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :cement mortar 1:6 (1 cement : 6 coarse sand) 11 dry stone pitching 22.5cm thick including supply of stones and preparing surface complete work 12 dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete :with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 13 centering and shuttering including strutting, propping etc. and removal of form for :foundations, footings, bases of columns, etc. for mass concrete 14 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level :1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) 15 providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size) 16 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.thermo-mechanically treated bars of grade fe-500d or more. 17 supplying and stacking at site 63 mm to 45 mm size stone aggregate 18 supplying and stacking at site moorum etc. 19 laying, spreading and compacting stone aggregate of specified sizes to wbm specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density 20 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement : 6 coarse sand) 21 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :one or more coats on old work 22 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) 23 engagement ofunskilledlabourfor executed the unforeseen works . 24 providing hydraulic excavator with 1 cum bucketfor different type of job related to chakari ash dyke and required another workas per direction of engineer-in-charge including hire charge of hydraulic excavator with operator,fuel, lubricant etc for proper completion of work.

Government Departments

TRN :49019525 | 12 May, 2025

Tender Value : 0

Hyderabad - Telangana

Tender for procurement supply and delivery of bopp laminated non-woven sack bags with lock for mahila shakti sarees to shg women groups

State Government

TRN :49020396 | 14 May, 2025

Tender Value : 0

Belagavi - Karnataka

Tender for tender for rate contract supply of disposable items to bims belagavi - corrugated drain.,water - bed,visualis-100-irrigation-aspiration-tubing-set-reusable,vaccum-suction-set-non-toxic-pyrogen-free-sterilised-disposable-ce/iso-certified(yankur-suction-set),urine-container-30ml,urine-collection-bag-1.5ltr,umbilical-venous-catherter-no5,umbilical-venous-catherter-no4,umbilical-venous-catherter-no3.5,umbilical-artery-catheter-5f,twin-bore-nasal-canula-adult,tracheostomy-tubes-with-no8.5-cuff-protex-or-equivalent,tracheostomy-tubes-with-no7.5-cuff-protex-or-equivalent,tracheostomy-tubes-with-no7.0-cuff-protex-or-equivalent,tracheostomy-tubes-with-no6.0-cuff-protex-or-equivalent,tracheostomy-tubes-with-no5.0-cuff-protex-or-equivalent,tracheostomy-tubes-with-no.0-cuff-protex-or-equivalent,tracheostomy-tubes-silicon-uncuff-size(pead)5.0,tracheostomy-tubes-silicon-uncuff-size(pead)4.5,tracheostomy-tubes-silicon-uncuff-size(pead)4.0,tracheostomy-tubes-silicon-uncuff-size(pead)3.5,tracheostomy-tubes-silicon-uncuff-size(pead)3.0,tracheostomy-tubes-silicon-uncuff-size(pead)2.5,tracheostomy-tubes-kit-uncuff-size4.5,tracheostomy-tubes-kit-uncuff-size4,tracheostomy-tubes-kit-uncuff-size3.5,tracheostomy-tubes-kit-uncuff-size3,tracheostomy-tubes-kit-size4.5,tracheostomy-tubes-kit-size4,t - protector,thermal-paper(high-quality)for-use-with-edan-se-1200-ecg-machine(1x100)-packa4-size,suction-catheters-no8,suction-catheters-no6,suction-catheters-no16,suction-catheters-no14,suction-catheters-no12,suction-catheters-no10,stillets-fitting-for-sizes7-endotracheal-tube,stillets-fitting-for-sizes4-endotracheal-tube,stillets-fitting-for-sizes3-endotracheal-tube,stillets-fitting-for-sizes2.5--endotracheal-tube,stillets-fitting-for-sizes2-endotracheal-tube,sterile-disposable-infusion-set(iv-infusion-set),steri-drape-for-ent,stehtoscope-peadiatric,stehtoscope-adult,stainless-steel-hydro-cannula-no.24,spinal-needle-no27g,spinal-needle-no26g,spinal-needle-no25g,spinal-needle-no24g,spinal-needle-no23g,spinal-needle-no22g,spinal-needle-no20g,spinal-needle-no18g,spc-catheter-malecot-with-stillete-fr20,spc-catheter-malecot-with-stillete-fr18,spc-catheter-malecot-with-stillete-fr16,spc-catheter-malecot-with-stillete-fr14,spc-catheter-malecot-with-stillete-fr12,spc-catheter-malecot-with-stillete-fr10,spc-catheter.,sony-thermal-glossy-paper-rolls-for-ultra-sound-typev,skin-staplers-disposable-35w-regular-size,skin-grafting-blade(humby-knife-blade),simcoe-irrigating-aspirating-cannula-22g,simco-cannula-no.22,siliconized-endotracheal-tubes-size4.5-without-cuff,siliconized-endotracheal-tubes-size4.0-without-cuff,siliconized-endotracheal-tubes-size3.5-without-cuff,siliconized-endotracheal-tubes-size3.0-without-cuff,siliconized-endotracheal-tubes-size2.5-without-cuff,siliconized-endotracheal-tubes-size2.0-without-cuff,side-port-blade-,septal-buttons,scented-masks-inflatable-cuff5,scented-masks-inflatable-cuff4,scented-masks-inflatable-cuff3,scented-masks-inflatable-cuff2,sanitary-napkin(size-extra-large),ryles-tube-no8,ryles-tube-no6,ryles-tube-no5,ryles-tube-no18,ryles-tube-no17,ryles-tube-no16,ryles-tube-no14,ryles-tube-no12,ryles-tube-no10,ryles-tube-no.-20,rubber-toniquet-no.6,rubber-toniquet-no.4,romovac-drain16,romovac-drain14,romovac-drain12,red-rubber-torniquet-4inch,red-rubber-catheter-no8,red-rubber-catheter-no7,red-rubber-catheter-no12,red-rubber-catheter-no11,red-rubber-catheter-no10,rae-ivory-pvc-nsala-tubes-with-soft-seal-cuff6,radiography-dry-laser-films-14inchx17inch(shall-give-one-cr-film-printer-free-of-cost-which-should-be-compatible-with-existing-fuji-cr-reader),radiography-computer-radiography-film-8inchx10inch(shall-give-one-cr-film-printer-free-of-cost-whichshould-be-compatible-with-existing-fuji-cr-reader),proseal-laryngeal-mask-airway-reusable-no4,proseal-laryngeal-mask-airway-reusable-no3,pigtail-catheter-8,pigtail-catheter-20,pigtail-catheter-18,pigtail-catheter-12,photo-therapy-eye-pad/goggles,phaco-tubings,peripherally-insrted--central-catheter-picc,pelvic-binder-l-size,papsmear-kit-(cytobrush-with-spatulla),oxygen-mask(adult),oxygen-mask-paediatric,ot-mask-with-tie-knot,optivantage-high-pressure-syringe-200ml,nrb-mask,north-polar-preformed-ivory-pvc-nasal-tubes-cuff8,north-polar-preformed-ivory-pvc-nasal-tubes-cuff7,north-polar-preformed-ivory-pvc-nasal-tubes-cuff6.5,nasal-splints-(internal-nasal-splints),nasal-splints-(external-nasal-splints),nasal-canula-paediatrics,nasal-02cannula-,n95-mask,micro-drip-set,measured-volume-set(coomb-set),long-arm-splint-universal,laryngscope-paediatric-conventional-4blades-set,laryngscope-adult-conventional-4blades-set,laparoscopic-tubal-ligation-band,lacrimal-stent,keratome-blade-2.8mm,iv-extension-3way-10cm,iv-extension-100cm,iobon-(antimicrobial-incise-drape-60x45-cm),iobon-(antimicrobial-incise-drape-34x35-cm),intubating-styleptes-small,intubating-styleptes-medium,intubating-styleptes-large,intubating-lma-reusable-size5,intubating-lma-reusable-size4,intubating-lma-reusable-size3,intrajagular-catheter-no10,intra-oculr-lens(foldable)no9-injector-system-preferably-2.8mm,pigtail-catheter-14,intra-oculr-lens(foldable)no8-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no6-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no5-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no23-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no22-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no21-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no20-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no19-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no17-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no16-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no15-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no14-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no13-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no12-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no11-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no10-injector-system-preferably-2.8mm,intra-ocular-lens(sf-iol)dia-13.5mm-optic6.5-size21,intra-ocular-lens(sf-iol)dia-13.5mm-optic6.5-size20,intra-ocular-lens(sf-iol)dia-13.5mm-optic6.5-size19,intra-ocular-lens(sf-iol)dia-13.5mm-optic6.5-size18,intra-ocular-lens(sf-iol)dia-13.5mm-optic6.5-size17,intra-ocular-lens(pciol)no26-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no25-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no24-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no23-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no22-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no21-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no21.5-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no20-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no20.5-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no19-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no19.5-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no18-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no17-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no16-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(iris-claw)size-5.5x8mm-no24d,intra-ocular-lens(iris-claw)size-5.5x8mm-no23d,intra-ocular-lens(iris-claw)size-5.5x8mm-no22d,intra-ocular-lens(iris-claw)size-5.5x8mm-no16d,intra-ocular-lens(iris-claw)size-5.5x8mm-no21,intra-ocular-lens(iris-claw)size-5.5x8mm-no20,intra-ocular-lens(iris-claw)size-5.5x8mm-no19,intra-ocular-lens(iris-claw)size-5.5x8mm-no18,intra-ocular-lens(iris-claw)size-5.5x8mm-no17,intra-ocular-lens(aciol)no19.5-optic-diameter5.25mm-and-size-13mm,intra-ocular-lens(aciol)no19-optic-diameter5.25mm-and-size-13mm,intra-ocular-lens(aciol)no18-optic-diameter5.25mm-and-size-13mm,intra-ocular-lens(aciol)no17-optic-diameter5.25mm-and-size-13mm,intra-ocular-lens(aciol)no16-optic-diameter5.25mm-and-size-13mm,intra-ocular-lens(aciol)no15-optic-diameter5.25mm-and-size-13mm,intra-ocular-lens(aciol)no14-optic-diameter5.25mm-and-size-13mm,intra-ocular-lens(aciol)no12-optic-diameter5.25mm-and-size-13mm,intra-ocular-lens(aciol)no11-optic-diameter5.25mm-and-size-13mm,intersurgical-i-gel-no.-5.0,intersurgical-i-gel-no.-4.0,intersurgical-i-gel-no.-3.5,intersurgical-i-gel-no.-3.0,infant-feeding-tube-no9,infant-feeding-tube-no8,infant-feeding-tube-no7,infant-feeding-tube-no6,infant-feeding-tube-no5,infant-feeding-tube-no10,ijc-dialysis-catheters-dual-luman-with-ctheter-kit-curved-extension-and-laser-cut-side-slots-3.8mmx13.5,i-gel-supraglottic-airways(inter-surgical)-size2.5,i-gel-supraglottic-airways(inter-surgical)-size2,i-gel-supraglottic-airways(inter-surgical)-size1.5,i-gel-supraglottic-airways(inter-surgical)-size1,icds-bags,icd-tubes-trocer-no32,icd-tubes-trocer-no30,icd-tubes-trocer-no28,icd-tubes-trocer-no24,icd-tubes-trocer-no16,icd-tubes-trocer-no14,heparinised-syringes-(for-abg-analysis)(plastic-round-disposable-heparin-coated-abg-syringe,14g,-packet),hemolock-(weck)-clips-size-600,hemolock-(weck)-clips-size-400,hemolock-(weck)-clips-size-200,hb-strips-with-machine(should-give-one-machine-free-of-cost-for-each-500-strips),glucometer-strips-with-machine(should-give-one-machine-free-of-cost-for-each-1000-strips),folleys-catheters-no.22,folleys-catheters-no.20,folleys-catheters-no.18,folleys-catheters-no.16,folleys-catheters-no.14,folleys-catheters-no.12,folleys-catheters-no.10,folleys-catheters-no.08,folleys-catheters-no.06,folleys-catheter-three-way--22fr,folleys-catheter-three-way--20fr,folleys-catheter-silicone-two-way-18fr,folleys-catheter-silicone-two-way-16fr,folleys-catheter-silicone-two-way-14fr,extension-with-integrated-bi-way-50cm,extension-with-integrated-bi-way-25cm,extension-with-integrated-bi-way-10cm,examination-gloves(small-size),examination-gloves(medium-size),examination-gloves(large-size),examination-gloves(extra-small-size),endotracheal-tubes-size9.5with-cuff,endotracheal-tubes-size9.0without-cuff,endotracheal-tubes-size9.0with-cuff,endotracheal-tubes-size8.5without-cuff,endotracheal-tubes-size8.5with-cuff,endotracheal-tubes-size8.0without-cuff,endotracheal-tubes-size8.0with-cuff,endotracheal-tubes-size7.5without-cuff,endotracheal-tubes-size7.5with-cuff,endotracheal-tubes-size7.0without-cuff,endotracheal-tubes-size7.0with-cuff,endotracheal-tubes-size6.5without-cuff,endotracheal-tubes-size6.5with-cuff,endotracheal-tubes-size6.0without-cuff,endotracheal-tubes-size6.0with-cuff,endotracheal-tubes-size5.5without-cuff,endotracheal-tubes-size5.5with-cuff,endotracheal-tubes-size5.0without-cuff,endotracheal-tubes-size5.0with-cuff,endotracheal-tubes-size4.5without-cuff,endotracheal-tubes-size4.5with-cuff,endotracheal-tubes-size4.0without-cuff,endotracheal-tubes-size4.0with-cuff,endotracheal-tubes-size3.5without-cuff,endotracheal-tubes-size3.5with-cuff,endotracheal-tubes-size3.0without-cuff,endotracheal-tubes-size3.0with-cuff,endotracheal-tubes-size2.5without-cuff,endotracheal-tubes-size2.5with-cuff,endotracheal-tubes-size2.0without-cuff,endotracheal-tubes-size2.0with-cuff,elbow-gloves(small),elbow-gloves(medium),elbow-gloves(large),elastic-adhesive-bandage-10cmsx4/6mtr,ecg-rolls-106mm-4inch,ecg-paper-roll-size-3inch(80mm-x-20-mtrs),ecg-chest-leads-disposable,ear-foam-tips-small-size.,ear-foam-tips-big-size.,ear-foam-tips-for-paediatrics-packets,ear-foam-tips-for-adults-packets,dry-laser-films-14inchx17inch(shall-give-one-cr-film-printer-free-of-cost-which-should-be-compatible-with-existing-fuji-cr-reader),disposable-syringe-5ml-with-23g-needle,disposable-syringe-50ml-with-needle,disposable-syringe-2ml-with-23g-needle,disposable-syringe-20ml-with-needle.,disposable-syringe-1ml-26x1.5-g,disposable-syringe-10ml-with-needle,disposable-plastic-sheet,disposable-plastic-apron-material-hmhd/ldp-plastic-colour-medical-blue-length-52inch-56inch-(below-the-knee)-size-medium-blood-and-water-resistant-fits-men-and-women,disposable-ot-masks-three-layer-with-6.5inch-ear-loop-melt-blown-cloth-and-non-woven-material-colour-medical-blue-dimension-6.88-inchx-3.74inch-outside-layer-leak-proof-non-woven-abric(25gsm)middle-layer-high-density-filter-yer(25gsm)-melt-blown-fabric-bfe-more-and-equivalent-to95%inner-layer-direct-contact-skin-layer-non-woven-fabric-quad-fold-design-pleat-depth-design-5/8inch-size-universal-certification-ce-iso/astm-level1,disposable-ot-caps-25-gsm-medical-grade-polypropylene-spun-bond-non-woven-materials-with-ultrasonic-sealed-with-small-elastic-at-the-back,disposable-needle-no26g-half-inch,disposable-needle-no.-24g,disposable-needle-no.-20g,disposable-needle-no.-18g,disposable-microtone-blade-high-profile-set,disposable-mackintosh-sheet,disposable-iv-cannula-26g,disposable-iv-cannula-24g,disposable-iv-cannula-22g,disposable-iv-cannula-20g,disposable-iv-cannula-18g,disposable-iv-cannula-16g,disposable-insulin-syringe-1ml(0.25x6mm),disposable-hiv-protection-kit hiv-kits-discription.-(1) surgical-gown-1piece (2) face-mask-1piece (3) face-protector-1piece (4) head-cap-1piece (5) shoe-cover-1 piece (6) gloves-1 piece,disposable-gown,disposable-glove-7inch(pair)-disposable-sterile-isi-or-ce-marked-gloves,disposable-glove-7.5inch(pair)-disposable-sterile-isi-or-ce-marked-gloves,disposable-glove-6inch(pair)disposable-sterile-isi-or-ce-marked-gloves,disposable-glove-6.5inch(pair)disposable-sterile-isi-or-ce-marked-gloves,disposable-crescent-blades,disposable-bed-sheet-colour-medical-blue-disposable-breathable-chemical-free-skin-friendly-bacterial-and-viral-barrier-tear-and-puncture-resisitant-impervious-and-repellant-to-fluids-adhesive-strip-fitted-elastic-on-all-boundaries-sterilized-dimension-and-weight-width-160cm-length-180cm-weight-of-bedsheet-130gram-material-nonwoven-fabric-polycoated-gsm-of-non-woven-material(g/m2)-40-to-60certifications-and-reports-aami-protection-level-level-iv-certification--iso-13485-medisurge-or-equivalent,disposable-a-scopy-shaver-4.00mm,disposable-1.5inch-needle-length,-26-gauge-needle-thickness-and-2ml-syringe-with-thread-locking-system-(unilock),disafe-plus-,diaper(adult)m-l(30inch-to-50inch),diaper-newborn(2-5kg),dialyser-suitable-for-fresenius-dialyser-machine0.8(m2)inline-steam-sterilization-reusable,dialyser-suitable-for-fresenius-dialyser-machine(f6)1.3(m2)inline-steam-sterilization-reusable-,dermatome.,dcr-stents-(dacrocystorhinostomy),dark-goggle,cord-clamp,computer-radiography-film-8inchx10inch(shall-give-one-cr-film-printer-free-of-cost-whichshould-be-compatible-with-existing-fuji-cr-reader),collegen-sheet-dressing,chest-drain32,chest-drain30,chest-drain28,chest-drain24,central-venous-line7,central-venous-line6.5,central-venous-line6.0,central-venous-line5,central-venous-line4.5,central-venous-line4,central-venous-line3.5,blood_lancet.,central-venous-line3.0,central-line-triple-lumen-,central-line-double-lumen-,cannula-fixator-,caesarian-drape-sterilized-disposable-non-woven-material-disposable-breathable-chemical-free-skin-friendly-bacterial-and-viral-barrier-tear-and-puncture-resisitant-impervious-and-repellant-to-fluids-colour-medical-blue-43gsm-size-160cmx250cm-43gsm-8mms-100cmx80cm-absorbent-80gsm-10inch-hole-2inch-adhesives-with-butter-paper,bone-wax-2.5gms-each-pkt,-1-box-contains-12-pieces-per-box,blood-transfusion-set,blood-tubing-set,blood-bags-double-450-ml,blood-bags-double-350-ml,biway-cannula,biopsy-disposable-punches--3.5,biopsy-disposable-punches--3,biopsy-disposable-punches--2.5,biopsy-disposable-punches--2,b-p-blade-no11,b-p-blade-no.12,b-p-blade-no.-21,b-p-blade-no.-20-,b-p-blade-no.-15,avf-needle-17g,a-scopy-burr-4.mm,angiographic-syringe-ct-and-mr-connector-pipe-compatable,angiographic-syringe-connection-pipe-two-way/by-way,angiographic-syringe-connection-pipe-single-way,angiographic-disposable-syringe-ct-and-mri-4x12,angiographic-disposable--syringe-200ml,ambu-bag-set-autoclavable-paediatric,ambu-bag-set-autoclavable-neonatal,ambu-bag-set-autoclavable-adult,ambu-bag-reservior-750ml,ambu-bag-reservior-500ml,ambu-bag-reservior-250ml,ambu-bag-reservior-1000ml,ambu-bag-face-mask-size2,ambu-bag-face-mask-size1,ambu-bag-face-mask-size00,ambu-bag-face-mask-size0,airways-no-3,airways-no-2,airways-no-1,air-bed-,adhesive-abdomen-drape,abgel-(gel-foam),abdominal-drain-kit-size-32,abdominal-drain-kit-size-30,abdominal-drain-kit-size-28,abdominal-drain-kit-size-26,abdominal-drain-kit-size-24

Boards / Undertakings / PSU

TRN :48996540 | 13 May, 2025

Tender Value : 1.47 Crore

Matunga - Maharashtra

Tender for repair, renovation, and reconfiguration of lab 1 at the computer engineering and it engineering department, first floor, vjti, matunga, mumbai.= 1 dismantling of existing partitions, wall paneling, etc., all complete as per site requirements, and stacking the usable materials within building premises as directed by the architect/consultant/ engineer-in- charge, etc. complete. (lead upto 100 meters) 2 removal of cement tiles, existing flooring, wall tiles,marble, polished shahabad flooring, dado with or without bed concrete, including stacking the materials as directed, with all leads, lifts, etc., complete. (lead upto 100 meters) 3 dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts etc. complete. ( lead upto 100 meters) 4 scraping the old paint from the plastered internal surface using a dust-free vacuum paint scraper, followed by coating the entire surface with a mixture of whiting or glue and linseed oil, including the provision of scaffolding, as directed. (the scraping of old paint should be done until the neeru finish of the plaster is achieved.) lead and lift upto 100 meters etc. complete. 5 removing old paint from steel and other metal surfaces and making the surfaces even with hand scrapping, scaffolding etc. complete. 6 removing the existing cement plaster of any thickness without causing dust nuisance, stacking the debris up to a distance of 100 meters, cleaning the site, etc. complete. 7 providing and applying an anti-corrosive chemical to exposed reinforcement of r.c.c. members such as beams, columns, and slabs. this includes one coat of alkaline rust converter (feovert, rusticide, or equivalent) after cleaning the surface with a wire brush, followed by two coats of anti-corrosive, epoxy-based, two-component, zinc-rich primer (materemaco p 130 of basf, phenolic ipnet rb, polyalk flxoprime, or equivalent) for rebar protection on exposed reinforcement. additionally, apply a concrete-penetrating corrosive inhibitor (epco kp-100, polalk ep 113, masterseal 1414 of basf, fosroc, or equivalent) over the adjoining concrete surface. etc. complete. 8 providing and applying a bond coat of approved epoxy resin (masterbrace 1414 of basf, epi bond of krishna conchem, or equivalent) before polymer plaster or concrete to ensure a perfect bond between old concrete and new concrete/polymer plaster surfaces. the bond coat should be applied within half an hour after preparation, conforming to astm c881 type 2. this process includes the use of nylon brushes, scaffolding, labor, etc. complete. 9 providing and applying ready-mix polymer-modified cement mortar with an average thickness of 15mm, using polymer in one or more layers, in a proportion of 1:5:15 (polymer, cement, and quartz sand) as per the manufacturers specifications. the surface should be cured after 72 hours of application using wet gunny bags, etc. complete. 10 providing and applying ready-mix polymer-modified cement mortar with an average thickness of 30mm-50mm, using polymer in one or more layers, in a proportion of 1:5:15 (polymer, cement, and quartz sand) as per the manufacturers specifications. the surface should be cured after 72 hours of application using wet gunny bags, etc. complete. 11 providing and applying a 30mm thick self-curing ceramic polymer microconcrete of an approved make, having a compressive strength above m30, non-shrink, and impermeable, as a filling mortar for load-carrying r.c.c. members in two layers on cleaned concrete surfaces, including honeycomb areas (using manual or mechanical means). the mortar shall be prepared by mixing nicosil c80 and fresh 53-grade cement with the required water-cement ratio to achieve the desired consistency. the application and finishing shall be done by manual trowelling. curing shall be carried out after the initial setting time, in accordance with the manufacturers specifications. the work shall be executed in line with the specifications and as directed by the engineer-in-charge. the work must be carried out by a certified applicator, and the work shall be guaranteed for 5 years. the guarantee shall be provided on a rs. 500/- stamp paper. (the bond coat, as per item no. 08 in the boq, is to be applied before the coating.) 12 providing and applying 12mm thick internal/external ready-mix plaster conforming to is: 4031 (part-4) 1988 and is: 383-1970, in a single coat using cement mortar in a proportion of 1:4, with a special type of polymer additive (approximately 0.4%), on all types of surfaces in all positions, including scaffolding and curing. the plaster shall be followed by a smooth finishing coat of gypsum plaster of 6mm thickness, ensuring an even, smooth surface suitable for painting. complete with necessary curing, scaffolding, and all other related works. 13 providing and applying a priming coat over new/old steel and other metal surfaces, including preparing the surface by thoroughly cleaning oil, grease, dirt, and other foreign matter. the surface shall be scoured with wire brushes, fine steel wool, scrapers, and sandpaper, with scaffolding as required, etc. complete. 14 providing and applying priming coat over new wood and wood-based surfaces, including preparing the surface by thoroughly cleaning oil, grease, dirt, and other foreign matter, sanding, knotting, scaffolding, etc., complete. (brands such as asian paints, dulux paints, nerolac, berger, royal, or equivalent make.) 15 providing and applying two coats of synthetic enamel paint of approved color to new/old structural steel work and woodwork in buildings, including scaffolding if necessary, cleaning, and preparing the surface (excluding primer coat). etc. complete.(brands such as asian paints, dulux paints, nerolac, berger, royal, or equivalent make.) 16 removing and refixingof doors and windows with frames and stacking the materials as directed, including all leads, lifts, labour, fitting etc., complete. (lead up to 100 meters) 17 providing and laying in pattern 600 mm x 600 mm vitrified tile flooring of 8 to 10 mm thickness and confirming to is 15622-2006 ( group bla) of approved make,quality, shade and pattern for flooring . the tile flooring shall be laid in pattern with 2 mm spacers & tiles fixed in cement mortar of 1:4. the rate shall be including floor chipping to attaining required levels, epoxy grouting of joints using approved matching colour tile grout of epoxy grout, necessary protection of the laid floor, acid wash cleaning for any stains before handover. etc. complete as per the drawing, specification and to complete satisfaction of the engineer. rate to include the wastages as per the pattern indicated in the layouts. brands like kajaria, johnson or similar etc. groove shall be filled with grout of approved shade ( brands like laticrete etc.) as dicectedby the engineer-in-charge. etc. complete. basic rate for tile material- rs. 1440/- per sq.m. 18 providing and fixing skirting, including labor, materials, and all related work, etc., complete. rate for skirting of height up to 150 mm. 19 vinyl flooring for hod cabin:providing and fixing approved color homogeneous flooring, 4mm thick with interlocking system, single-layered flexible spc vinyl flooring (spica by tusker vinyl floorings) in roll form, over the provided i.p.s. or kota stone flooring. the flooring will be fixed using approved adhesive, and all joints will be soldered with pvc rods as per the manufacturer’s specifications. the work will be completed as directed, ensuring proper leveling and cleaning. the roll width will be a minimum of 2.0 meters, and the weight of the pvc flooring will be 90 kg per 30 sqm. as directed and approved by engineer in charge. etc complete. basic rate for vinayl flooring material- rs. 900/- per sq.m. 20 providing and laying vitrified mirror/glossy/matte finish tiles of size 590 mm to 605 mm x 590 mm to 605 mm with a thickness of 8 to 10 mm, conforming to is 15622:2006 (group b1a) from an approved make, shade, and pattern, for dado and skirting in the required positions. the tiles shall be fixed in 1:4 cement mortar, including neat cement float, filling of joints, curing, cleaning, and all related work, etc., complete. basic rate for tile material- rs. 790/- per sq.m. 21 providing second-class burnt brick masonry with conventional/i.s. type bricks in cement mortar 1:6 in the superstructure, including striking joints, raking out joints, watering, scaffolding, and all related work, etc., complete. 22 lowering the debris obtained from breaking and removing cement plaster/burnt brick masonry from the first floor by any means, without causing dust nuisance or damage to the structure. the debris shall be stacked as directed by the engineer-in-charge, including cleaning the site, etc., complete. (lead up to 100 meters.) 23 removing and disposing of debris from the site to a dumping ground outside the vjti premises (in accordance with municipal rules), etc. complete. as directed by the engineer-in-charge. (minimum 6 cu.m debris per trip) 24 providing anti-termite treatment to the wooden frames of doors and windows of the existing building as per i.s. 6313 (part-iii), by drilling 6 mm dia. holes at the four corners on one side and the four corners on the other side, at a downward angle of approximately 45 degrees at the junction of the woodwork and masonry. injecting 150 ml of chlorodane 5% w.c. into each hole and sealing with putty, etc., complete, with a 2-year guarantee on bond paper. 25 providing and applying waterproof melamine polish of the required finish to the woodwork by spray machine, including knotting and preparing an even surface by scraping, applying french polish, scaffolding if required, etc., complete.note: the work is to be executed only with prior approval from the superintending engineer. (brands such as asian paints, mrf melamine or equivalent.) etc. complete. 26 providing and fixing ss t/u/l strip profiles for walls, ceilings, tiles, flooring, main doors, interior decoration, bathrooms, and living rooms, including transportation, wastage, labor, etc., complete.shape: t/u/l profilematerial: ss 304 grade stainless steeldimensions: 8 mm to 12 mmlength: 2440 mm (8 feet), 3048 mm (10 feet)type: t-sectionfinish: polishedposition: interiorcolor options: gold, rose gold, black, silver, champagne, antique hairline, antique copperthickness: 2 mm to 8 mmnote: the shape, pattern, color, and design will be directed by the architect/consultant/or engineer in charge. basic rate for material- rs. 850/- per number. 27 providing and fixing ss t/u/l strip profiles for walls, ceilings, tiles, flooring, main doors, interior decoration, bathrooms, and living rooms, including transportation, wastage, labor, etc., complete.shape: t/u/l profilematerial: ss 304 grade stainless steeldimensions: 16 mm to 32 mmlength: 2440 mm (8 feet), 3048 mm (10 feet)type: t-sectionfinish: polishedposition: interiorcolor options: gold, rose gold, black, silver, champagne, antique hairline, antique copperthickness: 2 mm to 8 mmnote: the shape, pattern, color, and design will be directed by the architect/consultant/or engineer in charge. basic rate for material- rs. 850/- per number. 28 providing and fixing sign boards foor doors:specification for waterproof signage boards (12 x 4 inch)size: 12 inches (l) x 4 inches (h) (with size tolerance is plus or minus 1%)material: high-quality, durable acrylic or pvc boardfinish: glossy or matte finish for clear readabilitywaterproof: weather-resistant, suitable for both indoor and outdoor usedesign: custom text, graphics, or logo engraving/printingmounting: wall-mountable with adhesive backing or screw mountscolors: available in multiple colors with contrast for visibility (e.g., white, black, silver)application: ideal for office cabins, rooms, labs, and other signage needsthis durable, waterproof signboard ensures clear and professional signage in various environments. including wastage, etc. complete. basic rate for material- rs. 460/- per number. 29 providing and fixing of 3d wall panels that can be painted as well.size of each panel: 2 x 2 feet.colour: any color, design, or pattern.features: lightweight, fire-resistant, easily diy, 100% recycled.made from natural bamboo plant fiber, etc., complete. basic rate for material- rs. 450/- per number. 30 providing and fixing wooden decorative fluted wall panels/louvered wall panels:material: high-quality wood (mdf, plywood, or hardwood) with a decorative veneer finish.dimensions: 8 feet x 4-5 inchesthickness: 8 mm - 12 mmdesign: fluted design with vertical or horizontal grooves for a decorative effect.color: multicolor/any colour. (customizable to match interior themes).shape: rectangular panels for seamless installation, etc., complete. basic rate for material- rs. 850/- per number. 31 providing and fixing machine cut mirror polished 16 mm to 20 mm thick telephone black / amba white / cat bary brown / rbi red / ocean brown granite stone partition with rounding the edges etc. complete. one side polishbasic rate for granite material- rs. 2530/- per sq.m. 32 providing and fixing oval-type under-counter wash hand basin of 16-inch x 22-inch size and of special color shade, having telephonic black/colored granite of 180mm thick stone black kadappa framework, including chromium-plated coupling bottle trap. the wash basin should be of cera company or equivalent, model no. 3448, as per the detailed drawing or as directed by the engineer-in-charge, etc., complete. (counter size 1.20m x 0.60m). (brands such as jaquar,kohler or equivalent make.) basic rate for wash basin - rs. 6000/- per number. 33 providing and constructing a granite kitchen platform with the installation of a stainless steel sink (600mm x 450mm) as per the detailed drawing, including vertical polished kadappa stone supports (25 to 30mm thick) on both sides, with a kadappa top (35 to 40mm thick) and a polished granite top (16 to 20mm thick). the platform will feature granite strips at the front and both sides, with two vertical granite supports (15 cm height). the top granite will be 75 cm x 40 cm, including cutting and opening for the sink of the required size in both kadappa and granite. the platform size is 5.00 m x 0.60 m, with a height of 0.75 m, etc. complete with all required finishing. basic rate for ss sink- rs. 6000/- per number. 34 supply and installation of 600x600mm modular metal perforated grid ceiling system (cg-01)the ceiling system shall be supplied and installed as per the specifications provided in the tender document, and in accordance with the directions and approval of the engineer-in-charge. the scope includes complete installation with all necessary materials, components, and finishing to ensure proper execution etc. complete. 35 providing and installation of aluminum frame works for partition with ply on both sides and laminate finish: providing and fixing partition aluminum frame work consist of 25mm x 50mm x 1.2mm thick extruded aluminium box section framework at spacing not exceeding 600mm centre to centre both ways (horizontal and vertical). the framework shall be secured at floor structural ceiling and sill/ lintel level with 25 x 50mm x 1.2mm thick horizontal aluminium section. framework to be secured to floor / walls / columns / ceiling / beams using 75mm metal screws and dowels.acoustic infill: providing & fixing acoustic insulation of approved make to g.i./ aluminum/ ms/ wooden frame partition of 50mm thick rockwool of density 48 kg/m with blanket wrapped in rp tissue suitably affixed to partition framework using where necessary gi binding wire duct tape as indicated in the drawing.outer skin:- providing and fixing 18mm plywood of brands like greenply, century or equivalent. finished with 1 mm thick laminate of approved shade applied on plywood of brands like formice, royal touche or equivalent brand.note: rate is as per aluminum framework with both side ply and laminate. etc. complete. 36 providing and fixing of laminate cladding with ply backing:providing and fixing 12mm bwr plywood (brand: greenply, century, or equivalent), directly fixed to the column. a 1mm thickness laminate of an approved shade, applied on the plywood surface. laminate brands: formica, royal touche, or equivalent. etc complete. 37 providing and installation of glass partition (toughened glass): providing 12mm toughened fixed glass partition including all patch fittings, ensuring smooth and even flush joints between glasses, fixing the same in positions to true line and level, finishing the wall joints with clear silicon sealants, cleaning the surface and ensuring that there are no scratch marks on the glass etc. complete as per drawing and specifications, glass brands should be dorma, ozone or equivalent. 38 providing and installation of glass partition (dgu glass): double-glazed unit glass with air spacer of 6 to 16mm, 95% transparency, etc. complete as per drawing and specifications, dorma or ozone or equivalent. 39 providing and installation of 12mm thick clear toughened glass door with film as required. (d2 - 0.91 x 2.10 m) specification:hardware: door to be complete with hardware to each leaf as follows: hinges: 8 nos. ss ball bearing butt hinges. door closer: concealed door closer with hold open. lock set: dead lock as approved.door handles:900mm ht. 36mm dia d type offset handle on both sides in approved powder coating. door stop: floor mounted door stopper as approved seals: drop down floor seal as approved. security system: na note: all the metal profile sections and hardware finish should match the frame. brands like dorma or ozone or equivalent. etc. complete as per drawing and specifications. 40 providing and installation of d1 - double door two-way sliding motorized door, suitable for door openings up to 1.20 meters with a maximum door weight of 100kg (both leaves). the door offers environmental protection with a working temperature range of -20°c to +50°c and is rainproof. it has a standard opening time of 3-8 seconds, with a remote control operating distance of 100 to 200 feet (depending on line of sight). the opening size is 2.4m x 2.10m, and the glass door size is 1.2m x 2.10m. brands like dorma, ozone, or equivalent, to be installed as per drawing and specifications. etc. complete. 41 providing and installation of d3 - 1.09m x 2.10m (single shutter) 12mm toughened glass door with fixed side panels, including all patch fittings, locking mechanisms, and ensuring smooth, even flush joints between the glass panels. the door is to be fixed in position to true line and level, with wall joints finished using clear silicone sealant. the surface should be cleaned and inspected to ensure there are no scratch marks on the glass. installation to be completed as per drawing and specifications, with brands like dorma, ozone, or equivalent. etc. complete. 42 pop punning: providing and applying of plaster of paris punning(1st quality isi approved pop) over plastered with minimum thickness of 8mm-12mm to existingwall surfaces, ceilings & concrete members etc., to be finished in line and plumb with smooth surface ready to receive paint base. rate to be inclusive of edge protection (gi), fibre mesh for service conduits,hacking wall surfaces for better bonding, cleaning, scrubbing the surface, providing grooves if necessary etc., complete as per architects/consultant/engineer-in-charges approval. brands like gyproc, armstrong, shera or equivalent etc. complete. 43 plastic emulsion paint (leed compliant, low voc): providing and applying plastic emulsion paint finish to walls, partitions, and ceiling surfaces of approved make, color, texture, and shade in two coats, with surface and finish acceptable to the engineer in charge to be achieved within these two coats. any additional coats, if required, shall be at the contractors cost. the work includes preparing existing surfaces by scraping away loose particles, dust, etc., washing and scrubbing, filling cracks with crack filler and binder, cleaning and making the surface dust-free, applying water-based rj london putty as directed, rubbing with sandpaper to smooth the surface, and applying one coat of primer as recommended by the approved paint manufacturer. the work also includes providing necessary scaffolding, cleaning, and protecting the site until handover, as well as masking and protecting all service devices such as switchboards, detectors, etc. the work is to be completed at all heights and leads, as per specifications or as directed by the architect/engineer in charge/consultant. brands like asian paints, berger, or equivalent are acceptable. etc. complete. 44 providing and applying premium decorative wallpaper high-end or custom designs (special finishes, custom patterns)specifications: material: non-woven fabric or vinylroll size: 21 inches wide x 33 feet long (covers 55 sq ft)pattern: various styles (floral, geometric, etc.)finish: matte, gloss, or texturedinstallation: peel & stick or pastefeatures:scratch & water-resistanteasy to clean (wipeable)fade-resistanteco-friendly, voc-freeideal for: living rooms, offices, and accent wallsmaintenance: clean with a damp cloth, no harsh chemicalscustom options: available in various colors and patterns, custom designs upon request. basic rate for wallpaper rs. 600/- per sqm. 45 standing platform (300-450 mm from ffl):construction of a standing platform at a height of 300 mm to 450 mm from the finished floor level (ffl), as per approved dimensions. the platform will be made of 18 mm thick wood (century, greenlam, or equivalent) and finished with wood polish (asian paint wood tec, mrf, or equivalent).materials:frame: mild steel or aluminum, powder-coated for corrosion resistance.surface: high-quality plywood, mdf, or approved materials with a non-slip finish.support: sturdy metal beams or supports for stability.features:height: 300 mm to 450 mm from ffl, as per design.finish: non-slip surface with smooth edges and protective coating.safety: non-slip tread and optional guardrails. etc. complete. 46 stage flooring: supply and installation of interlocking rubber tile flooring at the stage area as per the specifications and drawings provided. the flooring will consist of a 6.0 mm synthetic sport surface, including a =1.50 mm pur protect® treated vinyl surface layer, calendared and grained, supported by a pvc density single closed-cell foam, and reinforced with a fiberglass grid structure. it will feature sanosol treatment for fungistatic and bacteriostatic properties. the flooring will meet the following standards: weight: 3.7 kg/m², impact resistance (en 1517) =8 n/m, abrasion resistance (en iso 5470-1) =350 mg, shock absorption (en14808) =25% (labosport result = 28%), indentation resistance (en 1516) =0.5 mm, ball bounce (en 12235) =90%, vertical deformation (en 14809) =3.5 mm, sliding coefficient (en 13036-4) 80–110, fire (en 13501-1) cfl-s1, anti-viral activity (human coronavirus 229e) – iso 21702 (99.37% after 2 hours), energy return (nf p 90 203) =0.31 m/s, tvoc after 28 days <100 micrograms/m³ (iso 16000-6), floor score®, ce marking, en14904 compliant for multi-sports use, reach compliant, and singapore green label certified. the supply and installation will include making good any damaged surfaces using standard fillers such as birla white cement, cement-based grout, epoxy grout, or mortar, and repainting to match the color.all work will be completed in accordance with the specifications, design, drawings, and the direction of the engineer-in-charge. 47 providing and fixing of overhead storage as per the specifications and drawings provided in the tender document. etc. complete. 48 providing and fixing of surface storageas per the specifications and drawings provided in the tender document. etc. complete. 49 providing and fixing on-site a lab table as per the specifications and drawings provided in the tender document. etc. complete. 50 providing and fixing of office desk/table in faculty lounge as per the specifications and drawings provided in the tender document. etc. complete. 51 providing and fixing of office desk/table in office for hod as per the specifications and drawings provided in the tender document. etc. complete. 52 supply and installation ofhod cabin chair as per the specifications and drawings provided in the tender document. etc. complete. 53 supply and installation of faculty lounge chairs as per the specifications and drawings provided in the tender document. etc. complete. 54 supply and installation of study chairs for labs as per the specifications and drawings provided in the tender document. etc. complete. 55 supply and installation of foldable desklet tables for the seminar hall as per the specifications and drawings provided in the tender document. etc. complete. 56 removingthe exisitng light fixures, fans, wires, cables, swith boards and distribution boards etc. complete. 57 point wiring for independent plug, concealed type in min 20 mm isi marked hms pvc conduit with 1.5 sq.mm (2+1e) fr grade copper wires, modular type switch and socket, earthing and required accessories as per specification no wg-pw/sw. (brands for conduits precision/finolex/pressfit. and for cable barnds should be polycab/finolex/havells. etc. complete 58 point wiring for independent plug, concealed type in min 20 mm isi marked hms pvc conduit with 2.5 sq.mm (2+1e) fr grade copper wires, modular type switch and socket, earthing and required accessories as per specification no wg-pw/sw. (brands for conduits precision/finolex/pressfit. and for cable barnds should be polycab/finolex/havells. etc. complete 59 supplying and erecting flush type shockproof plug socket 6a & 16a (6 pin) with 16a / 25a switch combined with indicator lamp and fuse with gang box on wooden board.make /brand (roma/ legrand,/ greatwhite) etc. complete 60 supplying and erecting isi mark modular type 3 pin 6a / 16a multi socket with safety shutter, duly erected on providedplate and box with wiring connectionsetc.complete. brand : roma/gretwhite/legrand) etc. complete 61 supplying and erecting pvc surface modular double mounting plate 3 modules complete duly erected etc complete.(.brand roma/gretwhite/collar) 62 supplying and erecting pvc surface modular double mounting plate 4 modules complete duly erected etc complete.(.brand roma/gretwhite/collar) etc. complete 63 supplying and erecting pvc surface modular double mounting plate 6 modules complete duly erected etc complete.(.brand roma/gretwhite/collar) etc. complete 64 supplying and erecting pvc surface modular double mounting plate 8 modules complete duly erected etc complete.(.brand roma/gretwhite/collar) etc. complete 65 supplying and erecting pvc surface modular double mounting plate 12 modules complete duly erected etc complete.(.brand roma/gretwhite/collar) etc. complete 66 supplying and erecting regular/ standard model ceiling fan of 1400mm with sweep complete erected in position as per specification no. fg-fn/cf brand /orient/polycab/crompton etc. complete 67 supplying and erecting flush-type ceiling fan regulators and electronic step regulators for ceiling fans (600mm, 900mm, 1200mm, and 1400mm sweep), complete with installation on the provided switchboard. make/brand: roma, legrand, or greatwhite. 68 providing and fixing 36 watt 2x2 light fitingsupplying and erecting square shaped crca /die-cast aluminium powder coated housing led panel light (slim edge-lit) 600x600mm suitable for 36 w-40w includingmotion sensor led light with provision for plane front frame with translucent cover fixed to the housing etc.complete .brand philips/havels/wipro etc. complete 69 supplying and erecting 16 to 32 a dpmcb suitable to fix in 2 module of modular switch in provided box complete & duly concealed with necessary material and connected. (make/ brand: legrand/ schneider/ l&t/ indo asian) etc. complete 70 supplying & erecting triple pole and neutral distribution board (tpndb), 3 pole/4 pole mccb as incomer & outgoing sp mcb (24 poles) or tp mcb of 8 ways (24 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/gi frame (vertical busbar type) as per specification no. sw-swr/mcbdb1 (make/ brand: legrand/ schneider/ l&t/ indo asian) etc. complete 71 providing & erecting 3 pole mccb, 415 v, 100a, rated short-circuit breaking capacity 25 ka (ics=100% of icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/uv/tripalarm contact. mccb with phase barriers on both sides, insulation withstand capacity 800v, no line-load bias in provided enclosure/panel as per specification no. sw-swr/mccb (make/ brand: legrand/ schneider/ l&t/ indo asian) etc. complete 72 supplying, erecting & commissioning 4 pole rccb 63a, electromagnetic type with 30/100/300 ma sensitivity with earth leakage trip indication complete as per specification no. sw-rccb/rccb. (make/ brand: legrand/ schneider/ l&t/ indo asian) 73 supplying & erecting 2 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, nylon rip cord & grey colour sheathed with fr pvc, conforming to itd specification s/ws 113c laid in provided pvc casing capping/conduit as per specification no. wg-tw etc. complete. cables brands should be polycab/finolex/havells. etc. complete 74 supplying and installing cat-6 cable suitable for networking as per specification no. wg-coc/nc. cables brands should be polycab/finolex/havells. etc. complete. 75 supplying & erecting mains with 2 x 2.5 sq.mm. and earth wire 1.5 sq.mm frlsh pvc copper wire in hms pvc conduit min. 20mm dia. as per specification no: wg-ma/pc.etc complete. brand :polycab/finolex/havels) etc. complete 76 supplying, erecting & terminating xlpe armoured cable 3 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 swg) g.i. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no.cb-lt/cu(brand: polycab/ finolex/ havells)note - the quantity of wires for looping the required number of air conditioning units has to be calculated by the contractor with respect to the provided architectural working drawing. etc. complete 77 providing & erecting hot dipped galvanised cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) gi sheet of 150 mm width & 20 mm height complete with necessary hardware. cable tray brands should be profab or equivalent. etc. complete 78 supplying and erecting pvc box trunking of size 100x50 mm. with accessories on wall/ceiling as per specification no: wg-ma/box. etc. complete (make/ brand: legrand/ schneider/ l&t) 79 supply & fixing of aluminum box section to be laid on the floor with all excavation, re-cementing & refinishing civil works to make good in line with the existing floor level respective junctionbox to be fabricated in 16 swg gi sheet with cut out as required for terminating the box sections. shall include pvc conduits from jb to work station powerpoints i)150 x 150x 50 mmgijunction box with cover & cut outs etc. complete. (make/ brand: legrand/ schneider/ l&t) 80 supply of a.c split unit (2 ton) :supply of ac split unit as per the specifications, and drawings provided in tender document. make (carrier/ voltas/ bluestar/ samsung) etc. complete 81 supply of 2 ton casatte ac:2 ton inverter casette ac. cooling capacity 3200-8000 watt. offers uniform 360 degree round airflow, with 4 star energy rating. etc. complete. make (carrier/ voltas/ bluestar/ samsung) etc. complete 82 installation of 2 ton ac split unit etc. complete 83 installation of 2 ton ac cassette unit etc. complete 84 supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with rohs compliant suitable for refrigerant having 22swg thickness and inner dia/size 22mm complete. etc. complete. material selection should be high quality and from reputed brand as directed by engineer in charge. 85 supply & installation electrical communication cable between indoor to outdoor units.cables brands should be polycab/finolex/havells. etc. complete. 86 providing and fixing in position ms frame stand for a.c. units, floor or wall mounted, with vibration isolation pads and frame to be made out of required ms sections strong enough to hold the weight of the ac unit,and should be lockable, including fixing in position using necessary scaffolding, ladder etc, and painting with two or more coats ofapproved enamel paint on a coat of red oxide etc. complete 87 insulated condensate water drain piping constructed out of pvc / hdpe hard pipeswith 6mm thick nitride insulation, fitting, accessories, bends, elbows, tees, flanges, tapings, wall sleeves, hangers, supports, anchors fasteners and concealed in brickwork or flooring. etc. complete(make: finolex/ astral/ prince) 88 supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided pc / copper pipes having 9 mm thickness and inner diameter / sizes 28 mm for solar water heater/ac system. etc. complete. material selection should be high quality and from reputed brand as directed by engineer in charge. 89 supplying & erecting crca sheet metal enclosures of 1.2mm thickness with 20a, 2 pin plug & earth socket and 20a, 3 pin plug top with 20a/30a single pole mcb having rated short - circuit breaking capacity (icn) 10ka complete erected on angle iron/ gi frame. etc. complete 90 carrying out core cutting of size 3 to 5 dia x 15 length in the c.c./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original. etc. complete 91 supply and installation of roller blindsas per the specifications and drawings provided in the tender document. etc. complete. basic cost for blind cloth fabric material rs.900/- per sq.m. 92 carrying out test for ceramic tiles / vitrified tileswater absorption, modulus of rupture (set of 6 tiles) etc. complete. 93 carrying out test for plywood: determination of resistance to dry heat,determination of moisture content,determination of density,thickness of plywood. etc. complete. 94 carrying out test for test for glue adhesion for plywood etc. complete. 95 carrying out test for hollow / solid /aac blocksdensity test. (set of 3 blocks), compressive strength. (set of 3 blocks), water absorption test (set of 3 blocks) etc. complete. 96 providing and fixing 15 mm dia. cpvc pipe on walls, ceiling, or floor with necessary fittings, and remaking the demolished portion, etc., complete. this includes removing the existing pipeline if necessary, conveying, and stacking the same in the pwd chowky or as directed, etc., complete. (brands such as astral, finolex, prince or equivalent make.) 97 providing and fixing 20 mm dia. cpvc pipe on walls, ceiling, or floor with necessary fittings, and remaking the demolished portion, etc., complete. this includes removing the existing pipeline if necessary, conveying, and stacking the same in the pwd chowky or as directed, etc., complete. (brands such as astral, finolex, prince or equivalent make.) 98 providing and fixing 25 mm dia. cpvc pipe on walls, ceiling, or floor with necessary fittings, and remaking the demolished portion, etc., complete. this includes removing the existing pipeline if necessary, conveying, and stacking the same in the pwd chowky or as directed, etc., complete. (brands such as astral, finolex, prince or equivalent make.) 99 providing and fixing on walls/ceiling/floor 32mm dia cpvc pipe with necessary fittings, remaking good the demolished portion, etc., complete. including removing existing pipeline if necessary and conveying and stacking the same in pwd chowky or as directed, etc., complete. (brands such as astral, finolex, prince or equivalent make.) 100 providing and fixing 75 mm dia stabilizer pipe/p.v.c. soil vent/waste pipe with necessary fixtures and fittings, such as bends, tees, single junctions, slotted vent, clamps, etc., complete. 101 providing and fixing 100 mm dia stabilizer pipe/p.v.c. soil vent/waste pipe with necessary fixtures and fittings, such as bends, tees, single junctions, slotted vent, clamps, etc., complete. (brands such as astral, finolex, prince or equivalent make.) 102 providing and fixing 10 cm pvc nahani trap with grating, etc., complete. (brands such as astral, finolex, prince or equivalent make.) basic rate for nahani trap is rs. 380/- 103 providing and fixing c.p. pillar cock long neck with aerator of approed make including necessary sockets/union nut etc. complete. basic rate for pillar cock is rs. 1250/- per number 104 providing and fixing of exhaust fan 150mm crompton/havels/usha or equivalent etc. complete. basic rate for exhasut fan is rs.1000/- per number 105 providing and fixing stainless steel round napkin hanger for bathroom/towel holder for wash basin/napkin holder/bathroom (chrome) b. heavymaterial stainless steel product dimensions 17l x 5w x 19h centimetersfinish type chromeinstallation type wall-mounted shape round including fitting etc. completed.basic rate for material is rs. 320/- 106 providing and fixing premium front glass shelf - bathroom shelf/kitchen shelves wall mounted with frosted and toughen (tradition 6 x 18) chrome including fitting etc. complete. basic rate for material is rs. 650/- 107 providing and installation of 6 mm thick mirror with 6 mm thick ply backing, as per design. the mirror will be supported by stainless steel finished buttons, etc., complete. (the glass brand should be saint-gobain, borosil, or an equivalent make) basic rate for mirror is rs. 1250/- per sq.m. 108 supply and installation of nsd make smoke detectormodel:66a, certification: ce & ertl etc. complete. 109 supply and installation of nsd make heat detectormodel:66h, certification: ce & ertl etc. complete. 110 supply and installation of response indicator make: nsdmodel: p.s (mini) etc. complete. 111 supply and installation of manual call point (m.s) make nsd 112 supply and installation of 08 zone fire alarm panel make nsd(excel) etc. complete. 113 supply and installation of flasher hooter make nsdmodel no: ms17flash etc. complete. 114 supply and installation of supply & laying 1.0 sq. mm x 2 core copper armored isi cable for alarmsystem. with accessories per meter. brand/make :polycab/finolex/havellls) etc. complete. 115 supply and installation of high quality co2 fire extinguisher (6 kg)type:carbon dioxide (co2) fire extinguisher (for electrical fires and flammable liquids)capacity: 6 kgfire rating: class b (flammable liquids) class c (electrical fires)material: cylinder: steel or aluminum alloyfinish: red powder-coated for durabilityoperating pressure: 55 bardischarge time: approx. 8-10 secondsdischarge range: 3-5 feettemperature range:operating: -10°c to +60°c storage: -30°c to +60°cmounting: includes wall bracket certification: is 15683 (india) / ul/ce certified etc. complete.note: the rates for all fire safety alarm items include the complete supply, installation, commissioning, transportation, freight, and all associated costs. 116 providing architectural/ interior design services : scope of work as below:drawings preparation: 3d views, floor plans, furniture layout, electrical layout, ceiling layout, and partition layout.color scheme & material selection: guidance on colors and material choices for finishes, flooring, and furniture.quality control: ensure standards for structural, civil, electrical, fire safety, furniture work and hvac work.interior planning: optimize lab functionality and aesthetics, including furniture, partition design, and system planning (electrical, hvac, fire safety).modifications: suggest changes to designs based on site conditions and client feedback.coordination & monitoring: ensure project progress and timely completion by working closely with contractors. deputation of interior designer degree/diploma/certificate course having knowledge of autocad and 3d home or equivalent for the full period of the work. designes. monitor on-site execution, ensuring design adherence. taking joint measurements.preparing statements for extra items and excess quantities.compliance & safety: ensure adherence to safety codes and regulations. etc. complete.

Central Government/Public Sector

TRN :34418326 | 14 May, 2025

Tender Value : 0

Sonitpur - Assam

Tender for gem bids for 11547 cement 43 grade opc packed in hdpe bag each 50 kg wt conform to is 8112 1989 make birla gold or ambuja or ultratech or jk or dalmia or acc coarse sand free from vegetation coarse aggregate 20mm graded coarse aggregate 40mm graded hard core 63 to 90 mm 80 mm thick coloured interlocking precast paverblock any shape and size confirming to is 15658 2006 and grade m 40 of size 250mm by 125mm by 80mm road side marker hi res ms stock 10 ft long 50mm dia with white paint red paint top nylon rope 1 inch make samon or sajun or new england portable collapsible protective wall baskets galvanized welded mesh frame 2 cell per set 1 point 232 by 0 point 616 by 0 point 759 mtr with non woven geotextile 3mm thick 300 gsm as per ts

Central Government/Public Sector

TRN :34404851 | 10 May, 2025

Tender Value : 2.75 Crore

Lucknow - Uttar Pradesh

Tender for gem bids for bed bath towels with 2percentage chlornexidine alcohal free , conformable adhesive dressing consisting of a breathable non woven top layer , disposable ventilator circuit 22 mm 1point6 mts with y connector , flow divertor with atleast 46 to 72 nitinol strands with balanced porosity , kendal scd express dvt sleeves below knee size large , kendal scd express dvt sleeves below knee size medium , kendal scd express dvt sleeves below knee size small , lint absorbent cotton , pressure infusion bags 1000 ml , pressure infusor bags 500 ml , sterilized disposable non woven fabric wraparound procedure gown extra , suction catheter 14fr min length 50cm with markings of length , thermoplastic moulds head and neck for radiotherapy , yankauer suction cannula 28 cm , suction cannula 10 fr length 18 cm , adult nasal cannula for use with hfnc , ambu a scope 3 the flexible videoscope regular , ambu ascope 3 the flexible videoscope large , anaesthesia procedure kit containing surgeon gown 1 cut sheet spun lace with , cervical collar or tailor brace , chlorhexidine gluconate iv securement dressing 11point5 cm x 8point5 cm , connector tube for kendell dvt pump , high pressure 3 way stop cock connector rated to 1000 psi or more , hme with bacterial viral filter with filteration efficiency , kendall scd express dvt sleeves thigh length medium , nebulising chamber for ventilator patients with tpc , sterilized disposable non woven fabric wraparound , tracheostomy filter , transparent sterile dressing for central lines 10x12cm , water proof trolley cover length 150to200 x width 200to , bed bath towels with 2percantage chlornexidine alcohal , conformable adhesive dressing consisting of a breathable , pressure monitoring line 100 cm 200 cm male female , transparent medicated adhesive wound dressing 10 x 25 cm box of 12 , suction catheter 14fr min length 50cm with markings , suction catheter 16 fr min length 50cm with markings of , t piece disposable for oxygen therapy with o2 pipe , ag collagen matrix dressing with silver is an advanced , ambu ascope 3 the flexible videoscope regular , anaesthesia procedure kit containing surgeon gown 1 , chlorhexidine gluconate iv securement dressing 11point5 , disposable draw sheet 80 cms x 110cms , hme with bacterial viral filter with filteration efficiency of , mucous sucker paed , sterilized disposable nonwoven fabric wraparound procedure gown , water proof trolley cover length 150 to 200 x width 200to

Related Searched Keywords : woven bag

List of woven-bag Tenders

Tender for procurement supply and delivery of bopp laminated non-woven sack bags with lock for mahila shakti sarees to shg women groups

Get woven bag Tender Alert...

Related Searched Keywords : woven bag

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us