Filters

List of zinc-primer Tenders

List of latest zinc-primer Tenders in Indian Tenders. Click on any zinc-primer Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for zinc-primer Tenders.

All-Tenders (33)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :49057563 | 10 Jun, 2025

Tender Value : 1.88 Lacs

Unnao - Uttar Pradesh

Tender for tender for the work of spray/ brush painting of equipments at 132 kv sub-station chakalwanshi under etd, unnao - spray painting of lighting round pole after thorough cleaning of old painted surface with 01 coat of red oxide primer & 2 coat of zinc rich aluminium paint of ist quality asian/ berger/ nerolac make. 2 brush painting of complete surfaces of the chain link security fencing of height approximately 2.0 meters including its m.s strip horizontal runner, angle frame,m.s angle vertical uprights, etc.in front of switchyard of the sub station after duerubbing with sand paper & wire brush, cleaning with thin cotton and finally applying with 1 coat of red oxide primer and 2 coats of black colour synthetic enamel paint of 1st quality of asian/ berger / nerolac make as per specification and also repairing of damaged chain link security fencing by welding/knitting etc. as per requirement 3 spray painting of outer and inner surfaces of following equipments installed in 132 kv & 33 kv bays after thorough cleaning of old painted surface with 1 coat of red oxide primer and 2 coats of smoke grey colour synthetic enamel paint of 1st quality of asian / berger / nerolac make (top cover of all cts / pts/ cvts to be painted by red, yellow & blue colour as per phase sequence) as per specification 4 132kvct 5 132kvpt/cvt 6 132kv ct / pt / cvt junction box 7 33kv ct / pt 8 33kv ctjunction box 9 33kvpt junction box 10 33kv isolator junction box 11 brush painting of fire stands/ fire buckets and sand drums as detailed belowwork includes cleaning of rust deposited on surface then apply1 coat of red oxide primer and 2 coat of post office red colour of 1st quality synthetic enamel paint and also writng name of substionwithwhite colour (one side in hindi and opposite side in english) on fire bucket standand vkx / fire on fire bucket and sand drum 12 fire stand 13 fire bucket 14 brush painting of followings with 1 coat of red oxide primer and 2 coat of green/ black colour of 1st quality synthetic enamel paint through cleaning of rust, dust, etc. 15 75x10mm ms earthing strips 16 50x6mm ms earthing strips 17 25x6mm ms earthing strips of cable trenches

State Government

TRN :49060352 | 16 May, 2025

Tender Value : 0

Thodupuzha - Kerala

Tender for tender for cte-thodupuzha - roofing- 1 roofing work - cte-thodupuzha 2 providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120grams per sqm as per is: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 micronsminimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineerin- charge. the sheet shall be fixed using self drilling /self tappingscrews of size (5.5x 55 mm) with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 3 providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : ridges plain (500 - 600mm) 4 providing and fixing 15 cm wide, 45 cm overall semi-circular plain g.s. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.0.63 mm thick with zinc coating not less than 275 gm/m² 5 steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position andapplying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.hot finished welded type tubes 6 structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a primingcoat of approved steel primer all complete 7 demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge.nominal concrete 1:3:6 or richer mix (i/c equivalent designmix) 8 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stoneaggregate 20 mm nominal size) 9 centering and shuttering including strutting, propping etc. and removal of form for : lintels, beams, plinth beams, girders, bressumers andcantilevers

Local Bodies

TRN :49061448 | 23 May, 2025

Tender Value : 2.25 Lacs

Varanasi - Uttar Pradesh

Tender for tender for repair and cleaning work of well near kala mata temple in old ramnagar, ward number 65 in ramnagar zone - dewatering work from well by diesel or electric pump including hire of pump, fuel, generator, operater etc with all complete. 3 cleaning of silt/malba from well with the help of rope, bucket & lavour etc. with all complete. 4 providing & spreading of dury lime into the well with all complete. 5 disposal of silt/ malba from site upto 8 km with all complete. 6 earth work in cuttingand cartage up to 8 km. with all complete.(sor -si no. cartage 231a +253 e/w) 7 cement concrete with 2cm gauge approved stone ballast and c-sand 1:2:4 with20mm stone. etc all complete. 8 m-150 class brick work in 1:4 cement & f-sand etc all cpmlete.(rate tendar-i.n.1.10) 9 12mm thick plaster with crmrnt & f-sand approved etc all complete.(rate tendar-i.n.1.32) 10 finishing walls one coat of the water proofing cement paint of approved etc all complete. 11 wall painting with plastic emulsion paint of secent qullty approved brand and quallty etc all complete. 12 m.s. or iron work in heavy size sach as truss, butt up gate etc all complete.(rate tendar-i.n.1.) 13 providingcorrugatedg.s.sheetroofing includingvertical/curvedsurfacefixedwith polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i. limpet washers or withg.i.limpetwashersfilledwithwhitelead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete(uptoany pitchinhorizontal/vertical or curved surfaces), excluding the cost of purlins, raftersandtrussesandincludingcuttingtosize and shape wherever required.1.00 mm thick with zinc coating not less than 275 gm/m² .dsr 2023-12.1.2 (1257.55x0.735=923.89) 14 add 18% gst

Local Bodies

TRN :49061490 | 16 May, 2025

Tender Value : 0

Kozhikode - Kerala

Tender for tender for material supply of materials individual work mgnregs--- portland cement 2 20mm stone aggregate 3 10mm stone aggregate 4 coarse sand 5 quarry muck 6 boulder 7 twisted steel bar 8 wall form panel 1250x500mm 9 corner angle 45x45x5mm 1.50 long 10 100mm channel shoulder 2.5m long 11 double clip 12 single clip 13 ms tube 14 welding by electric plant 15 red oxide zinc chromate primer 16 mixer 17 vibrator 18 fine sand 19 solid block 40x20x10cm 20 solid block 30x20x15cm 21 gi pipe 50mm 22 gi pipe 40mm 23 gi trafford profile sheet 0.35mm thick 24 bitumen washer 25 g.i limpet washer 26 galvanised steel j or l hooks 8mm dia 27 gravel 5mm to 10mm 28 gravel 1.5mm to 2 mm 29 pvc pipe50 mm dia 30 solid block 40x20x20cm 31 solid block 40x20x15 cm 32 hollow block 40x20x10 cm 33 stainless steel screws 50mm 34 wire mesh 35 wire nails 36 watertinnable cement primer 37 pvc pipe 25mm dia 38 white vitrous china 10 litre (flush) 39 aracanut post 40 200 mm aluminium aldrop 41 pvc pipe 63 mmouter dia 4 kgf/cm2 42 pvc elbow63 mm dia 43 pvc bend63 mm dia

Local Bodies

TRN :49061526 | 23 May, 2025

Tender Value : 4.64 Lacs

Varanasi - Uttar Pradesh

Tender for tender for repair and cleaning work of well near dobia bridge, ward no. 12, golaghat - dewatering work from well by diesel or electric pump including hire of pump, fuel, generator, operater etc with all complete. 3 cleaning of silt/malba from well with the help of rope, bucket & lavour etc. with all complete. 4 providing & spreading of dury lime into the well with all complete. 5 disposal of silt/ malba from site upto 8 km with all complete. 6 earth work in cuttingand cartage up to 8 km. with all complete.(sor -si no. cartage 231a +253 e/w) 7 cement concrete with 2cm gauge approved stone ballast and c-sand 1:2:4 with20mm stone. etc all complete. 8 m-150 class brick work in 1:4 cement & f-sand etc all cpmlete.(rate tendar-i.n.1.10) 9 12mm thick plaster with crmrnt & f-sand approved etc all complete.(rate tendar-i.n.1.32) 10 finishing walls one coat of the water proofing cement paint of approved etc all complete. 11 wall painting with plastic emulsion paint of secent qullty approved brand and quallty etc all complete. 12 m.s. or iron work in heavy size sach as truss, butt up gate etc all complete.(rate tendar-i.n.1.) 13 providingcorrugatedg.s.sheetroofing includingvertical/curvedsurfacefixedwith polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i. limpet washers or withg.i.limpetwashersfilledwithwhitelead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete(uptoany pitchinhorizontal/vertical or curved surfaces), excluding the cost of purlins, raftersandtrussesandincludingcuttingtosize and shape wherever required.1.00 mm thick with zinc coating not less than 275 gm/m² .dsr 2023-12.1.2 (1257.55x0.735=923.89) 14 add 18% gst

Local Bodies

TRN :49061578 | 23 May, 2025

Tender Value : 1.77 Lacs

Varanasi - Uttar Pradesh

Tender for tender for repair and cleaning work of the well near the house under ramnagar zone ward no. 13 - dewatering work from well by diesel or electric pump including hire of pump, fuel, generator, operater etc with all complete. 3 cleaning of silt/malba from well with the help of rope, bucket & lavour etc. with all complete. 4 providing & spreading of dury lime into the well with all complete. 5 disposal of silt/ malba from site upto 8 km with all complete. 6 earth work in cuttingand cartage up to 8 km. with all complete.(sor -si no. cartage 231a +253 e/w) 7 cement concrete with 2cm gauge approved stone ballast and c-sand 1:2:4 with20mm stone. etc all complete. 8 m-150 class brick work in 1:4 cement & f-sand etc all cpmlete.(rate tendar-i.n.1.10) 9 12mm thick plaster with crmrnt & f-sand approved etc all complete.(rate tendar-i.n.1.32) 10 finishing walls one coat of the water proofing cement paint of approved etc all complete. 11 wall painting with plastic emulsion paint of secent qullty approved brand and quallty etc all complete. 12 m.s. or iron work in heavy size sach as truss, butt up gate etc all complete.(rate tendar-i.n.1.) 13 providingcorrugatedg.s.sheetroofing includingvertical/curvedsurfacefixedwith polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i. limpet washers or withg.i.limpetwashersfilledwithwhitelead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete(uptoany pitchinhorizontal/vertical or curved surfaces), excluding the cost of purlins, raftersandtrussesandincludingcuttingtosize and shape wherever required.1.00 mm thick with zinc coating not less than 275 gm/m² .dsr 2023-12.1.2 (1257.55x0.735=923.89) 14 add 18% gst

Local Bodies

TRN :49061791 | 16 May, 2025

Tender Value : 34.02 Lacs

Malappuram - Kerala

Tender for tender for mahatma gandhi nregs material supply for asset -- 1 solid blocks of size 30x20x15cm 2 portland cement 3 coarse sand (zone iii) 4 mild steel tubes hot finished welded type 5 red oxide zinc chromate primer 6 welding by electric plant 7 gi trafford profile sheet 0.35mm thick 8 bitumen washer 9 stainless steel screws 50 mm 10 galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm 11 wire nails 12 laterite stone of size 35x20x20cm 13 wire nails 14 200 mm aluminium aldrop 15 aracanut post 16 stone aggregate(single size): 40 mm nominal size 17 stone aggregate(single size):20 mm nominal size

State Government

TRN :49062033 | 13 May, 2025

Tender Value : 2.34 Lacs

Paravur - Kerala

Tender for tender for pakarappally devaswom - paravur group - constructing toilet block-- 1 appendix i-constructing toilet block 2 earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.all kinds of soil 3 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) 4 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size) 5 centering and shuttering including strutting, etc. and removal of form for:foundations, footings, bases of columns, etc for mass concrete 6 solid block masonry using pre cast solid blocks (factory made) of size 30x20x15 cm or nearest available size confirming to is 2185 part i of 1979 for foundation and plinth with thickness 15cm in: cm 1:6 ( 1 cement :6 coarse sand) etc complete 7 providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size 8 steel reinforcement for r.c.c work including straightening, cutting, bending, placing in position and binding all complete upto plinth level thermo - mechanically treated bars of grade fe-500d or more 9 solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to is 2185 part i of 1979 for super structure up to floor two level with thickness 15cm in : cm 1:6 ( 1 cement : 6 coarse sand) etc complete 10 reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (zone iii) : 3 graded stone aggregate 20 mm nominal size). 11 centering and shuttering including strutting, etc. and removal of form for:lintels, beams, plinth beams, girders bressumers and cantilevers 12 steel reinforcement for r.c.c work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelthermo - mechanically treated bars of grade fe-500d or more 13 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 14 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.size of tile 600 x 600 mm. 15 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineerin-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 16 providing and fixing water closet squatting pan (indian type w.c. pan) with 100 mm sand cast iron p or s trap, 10 litter low level white p.v.c.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:white vitreous china orissa pattern w.c. pan of size 580x440 mm with integral type foot rests 17 supplying and fixing cp towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site engineer-in-charge. 18 providing and fixing white vitreous china pedestal type water closet (european type w.c. pan) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:w.c. pan with isi marked white solid plastic seat and lid 19 providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:white vitreous china flat back wash basin size 550x400mm with single 15 mm c.p.brass pillar taps 20 finishing walls with acrylic smooth exterior paint of required shade:new work (two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 21 supply and fixing pvc door with frame including locking arrangements as per the direction of engineer-in-charge 22 providing and fixing m.s. grills of required pattern in frames of windows etc. with m.s. flats, square or round bars etc. including priming coat with approved steel primer all complete.fixed to openings/ wooden frames with rawl plugs screws etc 23 providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineer-in-charge. the sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 24 structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 25 providing and placing on terrace (at all floor levels) polyethylene water storage tank :isi 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 26 supplying and fixing cp health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge. 27 providing and fixing c.p brass bib cock of approved quality conforming to is: 8931.15 mm nominal bore 28 providing and fixing c.p. brass shower rose with 15 or 20 mm inlet:100 mm diameter 29 appendix ii-septic tank and soak pit 30 supplying and installing ready made pvc septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge (provision for cc/rcc/sand/06mm aggregate for the preparation of bed shall be paid separately. 4.35 to 50 flush capacity

State Government

TRN :49062069 | 13 May, 2025

Tender Value : 87.7 Thousand

Kangazha - Kerala

Tender for tender for dbhs kangazha changanacherry group- repair and maintenance to the toilets -- 1 dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: - asbestos sheet 2 labour charges for dismantling damaged closet - fitter (1st) engaged 3 dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. - for thickness of tiles 10 mm to 25 mm 4 earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. all kinds of soil 5 solid block masonry using pre cast solid blocks (factory made) of size 30x20x15 cm or nearest available size confirming to is 2185 part i of 1979 for foundation and plinth with thickness 15cm in: cm 1:6 ( 1 cement :6 coarse sand) etc complete 6 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 7 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. -size of tile 600 x 600 mm. 8 providing and fixing white vitreous china pedestal type water closet (european type w.c. pan) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:-w.c. pan with isi marked white solid plastic seat and lid 9 extra labour charges and material charges for washing and clearng toilet inside (floor and wall) using acid soap water, wire brush, water etc. 10 steel work for purlin/single section with g i pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete 11 providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineer-in-charge. the sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 12 supplying and providing the pvc sintex door, including all cost of material and labour charge. etc.

Government Departments

TRN :49067847 | 20 May, 2025

Tender Value : 31.52 Lacs

Jhansi - Uttar Pradesh

Tender for tender for construction work of tin shed outside bijauli badi mata temple - earth work by mechinical / manual means in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and for all lift:d.s.r code no-2.8.1 2 p/l in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plinth level 1:4:8 (1 cement: 4 coarse sand (zone-iii) derived from natural sources:8 graded stone aggregate40 mm nominal sizederived from natural sources .d.s.r code no-4.1.8 3 m-150 brick work in 1:6cement & c. sand mortar in foundation & plinth including all labour material complete item. d.sr-6.1.2 4 12 mm cement plaster thick 1:4 cement and coarse sand fair side single and half brick wall including internal rounded angles chamfers and or rounded angles not exceeding 80 mm in grith and finished even and smooth. dsr no-13.4.1 5 providing and laying in position specified grade of reinforcement cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement of r.c.c 1:1.5:3 with cement coarse sand .column t beam slab as dsr no-5.2.2 6 m.s (tor steel or plain ) in plain work such as r.c.c or r.b work including cutting / bending for proper shape as necessary including supply of all steel & wastage ,bend ,hook & authorised overlapping shall be measured … complete item.dsr 5.22.6 7 cost of foundation bolt…………..complete item 8 s/f of granite stone on plateform wallincluding complete in all respect dsr 8.2.2.1 9 steelwork inbuilt up tubular(round,square or ractangular hollow tubes etc)trusses etc including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer includingweldingand bolted with with special shaped washers etc all complete.dsr-10.16.2 10 providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineerin- charge. the sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(0.63 mm thick sheet) dsr 12.1.3 11 excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. (under floor) as per si.no. 2.25 (a) 12 providing and laying kota stone (dsr no-11.26) 13 s/f of 1200 mm sweep ceiling fan made with double ball bearing…complete item (make khaitan, polar, bajaj etc.) 14 s/f of 1x22 watt ledtube light ..complete (sch. nos.. 1413) 15 finishing walls with two coat ofpremium acrylicemulsion smooth exterior paint of best quality supply of all materials,labour and t&p etc dsr no 13.48.1 16 finishing wall with two coat of acrylic smoothdistemper (ready mix) having voc content less than 50 gram/liter exterior paint of best quality including all materials, labours, t&p etc all complete.dsr 13.41.1 17 supply and fixing of sign board including painting and lettering as directed by engineer-in-charge.

Related Searched Keywords : zinc primer

List of zinc-primer Tenders

Get zinc primer Tender Alert...

Related Searched Keywords : zinc primer

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us