Filters

List of latest Cement-Concrete-Road Tenders in Indian Tenders. Click on any Cement-Concrete-Road Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for Cement-Concrete-Road Tenders.

All-Tenders (1053)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :20859263 | 17 May, 2021

Tender Value : 5.00 Lacs

Yavatmal - Maharashtra

Tender for construction of cement concrete road at kopamandavi tq. pandharkawada tanda vasti vikas yojna

State Government

TRN :20859511 | 01 Jun, 2021

Tender Value : 12.81 Lacs

Sundergarh - Orissa

Tender for road works - trimming grass and weeds removal of rubbish up to a distance of 30 m outside the periphey of the area as per technical specification clause 201.1of mord specification for rural roadsand as per the direction of the engineer-in-charge, construction of embakment with approved materials obtained from borrow pits with all leads and lifts transporting to site by mechanical means spreading grading to required slope compacting to meet the requirements of table 300.2 and clause 305 of mosrth specification for road and bridge works 4th revision and as per the direction of the engineer-in-charge, providing and applying tack coat with bitumen emulsion rs-1 using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per the direction of the engineer-in-charge, providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per technical specification clause 504 and as per the direction of the engineer-in-charge, providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen, transported to site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolling with smooth wheeled, vibratory roller and tandem rollers to achieve the desired compaction as per clause-508 of mosrt&h specification for road & bridge works4th revision as per specification and direction of engineer -in –charge, painting two coats over wood and iron work with approved enamel paint over a coat of primming, including cost and conveyance of all materials to site, and all labour charges complete as per direction of e.i.c, reinforced cement concrete m 15 grade kilometre stone of standard design as per irc : 8 fixing in position including painting and printing etc as per drawing and as per the direction of the engineer-in-charge, ordinary kilometer stone, 200 mm stone, providing and fixing of typical informatory sign board with logo as per mord specifications and drawing. three ms plates of 1.6 mm thick, top and middle plate duly welded with ms flat iron 25mm x 5m size on back on edges. the lower plate will be welded with ms angle iron frame of 25mm x 25mm x 5mm. the angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 swg sheet tubes posts duly embedded in cement concrete m-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. the top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 swg steel plate tube. all m.s. will be stove enameled on both sides. lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. all sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing clause 1701 and annexure 1700.1 of mord and as per direction of the engineer-in-charge, providing and fixing of retro reflective cautionary, mandatory and informatory sign board as per irc:67 made of 1.5 mm thick ms sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade and colour supported and welded on 47mm x 47 mm x 12 swg sheet tube firmly fixed to the ground by mean of properly designed foundations with m-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing and as per the direction of the engineer-in-charge, 900 mm equilateral triangle, 600 mm circular, 600 x 450 mm square, construction of rcc guard posts of 200 mm dia m15 grade cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical rcc posts not to exceed 1 in 500 as per drawing and as per the direction of the engineer-in-charge, new construction, painting two coats with approved synthetic enamel paint including cost and conveyance of all materials to site and all labour charges complete as per direction of e.i.c, providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5mm is excusive of surface applied glass beads as per irc:35 . the finished surface to be level, uniform and free from streaks and holes, printing new letters & figures of any shade with enamel paint black or any other approved colour to give an even shade as per drawings and technical specification clause 1701, 5 letter

State Government

TRN :20859540 | 01 Jun, 2021

Tender Value : 95.42 Lacs

Sundergarh - Orissa

Tender for road work - trimming grass and weeds removal of rubbish up to a distance of 30 m outside the periphey of the area as per technical specification clause 201.1of mord specification for rural roadsand as per the direction of the engineer-in-charge, providing and applying tack coat with bitumen emulsion rs-1 using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per the direction of the engineer-in-charge, providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen, transported to site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolling with smooth wheeled, vibratory roller and tandem rollers to achieve the desired compaction as per clause-508 of mosrt&h specification for road & bridge works4th revision as per specification and direction of engineer -in –charge, supplying, fitting, fixing of road signboard made out of 3mm thick aluminium composite material acm sheet duly coated one side loaded with pressure sensitive encapsulated lens type high intensive grade retro-reflective sheeting complete as per morth technical specification clause 801.3 and irc -67/2001 with angle iron frame 65mm x 65mm x 6mm fixed with single angle iron post as per specification including application of two coats of enamel paint of approved quality in the form of checks white and black over the posts, fixed with m-15 grade cement concrete base of 300mm dia, 600mm depth, size of each post post as per approved drawing including cost, conveyance, royality & taxes of all materials, labour, t&p etc, complete as per direction of the e.i.c, 0.90mx0.60m rectangular, 0.75mx0.45m rectangular, reinforced cement concrete m 15 grade kilometre stone of standard design as per irc : 8 fixing in position including painting and printing etc as per drawing and as per the direction of the engineer-in-charge, ordinary kilometer stone, 200 mm stone, providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per irc:67 made of 1.5 mm thick ms sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade and colour supported and welded on 47mm x 47 mm x 12 swg sheet tube firmly fixed to the ground by mean of properly designed foundations with m-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing and as per the direction of the engineer-in-charge, 600 mm equilateral triangle, construction of rcc guard posts of 200 mm dia m15 grade cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical rcc posts not to exceed 1 in 500 as per drawing and as per the direction of the engineer-in-charge, new construction, water proofing cement base painting two coats with approved paint inclusive of cost of all material, labour and t&p etc. complete and as per the direction of the engineer-in-charge,

State Government

TRN :20859548 | 01 Jun, 2021

Tender Value : 1.88 Crore

Sundergarh - Orissa

Tender for road work - trimming grass and weeds removal of rubbish up to a distance of 30 m outside the periphey of the area as per technical specification clause 201.1of mord specification for rural roadsand as per the direction of the engineer-in-charge, construction of embakment with approved materials obtained from borrow pits with all leads and lifts transporting to site by mechanical means spreading grading to required slope compacting to meet the requirements of table 300.2 and clause 305 of mosrth specification for road and bridge works 4th revision and as per the direction of the engineer-in-charge, providing, laying, spreading & compacting graded stone aggregates to wet mix macadam including premixing the materials with water at omc in mechanical mix plant, carriage of mixed materials by tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per clause-406 of mosrt&h specification for road & bridge works4th revision as per specification and direction of engineer-in-charge, providing and applying primer coat with bitumen emulsion ss-1 on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per the direction of the engineer-in-charge, providing and applying tack coat with bitumen emulsion rs-1 using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per the direction of the engineer-in-charge, providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per technical specification clause 504 and as per the direction of the engineer-in-charge, providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen, transported to site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolling with smooth wheeled, vibratory roller and tandem rollers to achieve the desired compaction as per clause-508 of mosrt&h specification for road & bridge works4th revision as per specification and direction of engineer -in –charge, reinforced cement concrete m 15 grade kilometre stone of standard design as per irc : 8 fixing in position including painting and printing etc as per drawing and as per the direction of the engineer-in-charge, ordinary kilometer stone, 200 mm stone, finishing parapet with water proofing weather coat paint of approve shade, two coat to give an even shade with all cost, conveyance including scaffolding tax, t&p, labour etc complete as per the direction of engineer-in-charge, providing and erecting direction and place identifications of semi reflective sign boards of size upto 0.90 sqm. as per irc:67 made of 2 mm thick m.s. sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70 mm width and required message, letters, figures with reflective engineering grade tape as per mord specifications of required shade and colour. supported and welded on 47 mm x 47mm of 12 swg square tube of 3050 mm height duly strengthened by 25 mm x 5 mm m/s flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with m-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and mord technical specification clause 300, 800, 1700 as per direction of the engineer in charge inter mediate board, sign board, village identification board, providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per irc:67 made of 1.5 mm thick ms sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade and colour supported and welded on 47mm x 47 mm x 12 swg sheet tube firmly fixed to the ground by mean of properly designed foundations with m-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing and as per the direction of the engineer-in-charge, 900 mm equilateral triangle, 600 mm equilateral triangle, construction of rcc guard posts of 200 mm dia m15 grade cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical rcc posts not to exceed 1 in 500 as per drawing and as per the direction of the engineer-in-charge, new construction

State Government

TRN :20859560 | 01 Jun, 2021

Tender Value : 99.92 Lacs

Sundergarh - Orissa

Tender for road work - trimming grass and weeds removal of rubbish up to a distance of 30 m outside the periphey of the area as per technical specification clause 201.1of mord specification for rural roadsand as per the direction of the engineer-in-charge, earth work in stoney earth & gravel mixed with stone nad boulder not exceeding 0.014cum in volume within 50m initial lead and 1.50m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying not exceeding 0.3m in depth as per specification approved by the department & direction of the engineer-in-charge, providing, laying, spreading & compacting graded stone aggregates to wet mix macadam including premixing the materials with water at omc in mechanical mix plant, carriage of mixed materials by tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per clause-406 of mosrt&h specification for road & bridge works4th revision as per specification and direction of engineer-in-charge, providing and applying primer coat with bitumen emulsion ss-1 on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per the direction of the engineer-in-charge, providing and applying tack coat with bitumen emulsion rs-1 using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per the direction of the engineer-in-charge, providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per technical specification clause 504 and as per the direction of the engineer-in-charge, providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen, transported to site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolling with smooth wheeled, vibratory roller and tandem rollers to achieve the desired compaction as per clause-508 of mosrt&h specification for road & bridge works4th revision as per specification and direction of engineer -in –charge, supplying, fitting, fixing of road signboard made out of 3mm thick aluminium composite material acm sheet duly coated one side loaded with pressure sensitive encapsulated lens type high intensive grade retro-reflective sheeting complete as per morth technical specification clause 801.3 and irc -67/2001 with angle iron frame 65mm x 65mm x 6mm fixed with single angle iron post as per specification including application of two coats of enamel paint of approved quality in the form of checks white and black over the posts, fixed with m-15 grade cement concrete base of 300mm dia, 600mm depth, size of each post post as per approved drawing including cost, conveyance, royality & taxes of all materials, labour, t&p etc, complete as per direction of the e.i.c, 0.90mx0.60m rectangular, village identification board, reinforced cement concrete m 15 grade kilometre stone of standard design as per irc : 8 fixing in position including painting and printing etc as per drawing and as per the direction of the engineer-in-charge, ordinary kilometer stone, 200 mm stone, providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per irc:67 made of 1.5 mm thick ms sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade and colour supported and welded on 47mm x 47 mm x 12 swg sheet tube firmly fixed to the ground by mean of properly designed foundations with m-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing and as per the direction of the engineer-in-charge, 600 mm equilateral triangle, construction of rcc guard posts of 200 mm dia m15 grade cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical rcc posts not to exceed 1 in 500 as per drawing and as per the direction of the engineer-in-charge, new construction, water proofing cement base painting two coats with approved paint inclusive of cost of all material, labour and t&p etc. complete and as per the direction of the engineer-in-charge

State Government

TRN :20859605 | 01 Jun, 2021

Tender Value : 1.42 Crore

Sundergarh - Orissa

Tender for road works - trimming grass and weeds removal of rubbish up to a distance of 30 m outside the periphey of the area as per technical specification clause 201.1of mord specification for rural roadsand as per the direction of the engineer-in-charge, construction of embakment with approved materials obtained from borrow pits with all leads and lifts transporting to site by mechanical means spreading grading to required slope compacting to meet the requirements of table 300.2 and clause 305 of mosrth specification for road and bridge works 4th revision and as per the direction of the engineer-in-charge, providing and applying tack coat with bitumen emulsion rs-1 using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per the direction of the engineer-in-charge, providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per technical specification clause 504 and as per the direction of the engineer-in-charge, providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen, transported to site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolling with smooth wheeled, vibratory roller and tandem rollers to achieve the desired compaction as per clause-508 of mosrt&h specification for road & bridge works4th revision as per specification and direction of engineer -in –charge, painting two coats over wood and iron work with approved enamel paint over a coat of primming, including cost and conveyance of all materials to site, and all labour charges complete as per direction of e.i.c, reinforced cement concrete m 15 grade kilometre stone of standard design as per irc : 8 fixing in position including painting and printing etc as per drawing and as per the direction of the engineer-in-charge, ordinary kilometer stone, 200 mm stone, providing and fixing of typical informatory sign board with logo as per mord specifications and drawing. three ms plates of 1.6 mm thick, top and middle plate duly welded with ms flat iron 25mm x 5m size on back on edges. the lower plate will be welded with ms angle iron frame of 25mm x 25mm x 5mm. the angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 swg sheet tubes posts duly embedded in cement concrete m-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. the top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 swg steel plate tube. all m.s. will be stove enameled on both sides. lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. all sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing clause 1701 and annexure 1700.1 of mord and as per direction of the engineer-in-charge, providing and fixing of retro reflective cautionary, mandatory and informatory sign board as per irc:67 made of 1.5 mm thick ms sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade and colour supported and welded on 47mm x 47 mm x 12 swg sheet tube firmly fixed to the ground by mean of properly designed foundations with m-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing and as per the direction of the engineer-in-charge, 900 mm equilateral triangle, 600 mm circular, 600 x 450 mm square, construction of rcc guard posts of 200 mm dia m15 grade cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical rcc posts not to exceed 1 in 500 as per drawing and as per the direction of the engineer-in-charge, new construction, painting two coats with approved synthetic enamel paint including cost and conveyance of all materials to site and all labour charges complete as per direction of e.i.c, providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5mm is excusive of surface applied glass beads as per irc:35 . the finished surface to be level, uniform and free from streaks and holes, printing new letters & figures of any shade with enamel paint black or any other approved colour to give an even shade as per drawings and technical specification clause 1701, 5 letter

State Government

TRN :20859644 | 01 Jun, 2021

Tender Value : 2.43 Crore

Sundergarh - Orissa

Tender for road works - trimming grass and weeds removal of rubbish up to a distance of 30 m outside the periphey of the area as per technical specification clause 201.1of mord specification for rural roadsand as per the direction of the engineer-in-charge, construction of embakment with approved materials obtained from borrow pits with all leads and lifts transporting to site by mechanical means spreading grading to required slope compacting to meet the requirements of table 300.2 and clause 305 of mosrth specification for road and bridge works 4th revision and as per the direction of the engineer-in-charge, providing and applying tack coat with bitumen emulsion rs-1 using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per the direction of the engineer-in-charge, providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per technical specification clause 504 and as per the direction of the engineer-in-charge, providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen, transported to site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolling with smooth wheeled, vibratory roller and tandem rollers to achieve the desired compaction as per clause-508 of mosrt&h specification for road & bridge works4th revision as per specification and direction of engineer -in –charge, supplying, fitting, fixing of road signboard made out of 3mm thick aluminium composite material acm sheet duly coated one side loaded with pressure sensitive encapsulated lens type high intensive grade retro-reflective sheeting complete as per morth technical specification clause 801.3 and irc -67/2001 with angle iron frame 65mm x 65mm x 6mm fixed with single angle iron post as per specification including application of two coats of enamel paint of approved quality in the form of checks white and black over the posts, fixed with m-15 grade cement concrete base of 300mm dia, 600mm depth, size of each post post as per approved drawing including cost, conveyance, royality & taxes of all materials, labour, t&p etc, complete as per direction of the e.i.c, 0.90mx0.75m rectangular, 0.75mx0.45m rectangular, reinforced cement concrete m 15 grade kilometre stone of standard design as per irc : 8 fixing in position including painting and printing etc as per drawing and as per the direction of the engineer-in-charge, ordinary kilometer stone, providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per irc:67 made of 1.5 mm thick ms sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade and colour supported and welded on 47mm x 47 mm x 12 swg sheet tube firmly fixed to the ground by mean of properly designed foundations with m-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing and as per the direction of the engineer-in-charge, 600 mm equilateral triangle, construction of rcc guard posts of 200 mm dia m15 grade cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical rcc posts not to exceed 1 in 500 as per drawing and as per the direction of the engineer-in-charge, new construction, water proofing cement base painting two coats with approved paint inclusive of cost of all material, labour and t&p etc. complete and as per the direction of the engineer-in-charge,

State Government

TRN :20859688 | 01 Jun, 2021

Tender Value : 1.64 Crore

Sundergarh - Orissa

Tender for road work - trimming grass and weeds removal of rubbish up to a distance of 30 m outside the periphey of the area as per technical specification clause 201.1of mord specification for rural roadsand as per the direction of the engineer-in-charge, construction of embakment with approved materials obtained from borrow pits with all leads and lifts transporting to site by mechanical means spreading grading to required slope compacting to meet the requirements of table 300.2 and clause 305 of mosrth specification for road and bridge works 4th revision and as per the direction of the engineer-in-charge, providing, laying, spreading & compacting graded stone aggregates to wet mix macadam including premixing the materials with water at omc in mechanical mix plant, carriage of mixed materials by tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per clause-406 of mosrt&h specification for road & bridge works4th revision as per specification and direction of engineer-in-charge, providing and applying primer coat with bitumen emulsion ss-1 on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per the direction of the engineer-in-charge, providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen, transported to site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolling with smooth wheeled, vibratory roller and tandem rollers to achieve the desired compaction as per clause-508 of mosrt&h specification for road & bridge works4th revision as per specification and direction of engineer -in –charge, earth work in excavation in hard soil or gravelly soil for foundation within 50m initial leads &1.5m initial lifts includingrough dressing and breakingclods to max 5cm to 7cm and laying in layers not exceeding 0.3m in depth etc complete as per mord sp:302.3 & direction of the engineer-in-charge, supplying and filling foundation & plinth with good clean river sand including watering to complete saturation & ramming complete with all leads & lifts including cost. conveyance royality & taxes of all materials & cost of all labour & t&p required for the work complete measurement will be taken for compacted section as per direction of engineer-in-charge, cement concrete of m-15 grade having maximum compressive strength of 150 kg/cm2 test to be conducted on 150 mm cubes tested at 28 days including curing tests conducted in accordance with is-456 & is-516 & conforming to clause-302 of irc 21/1987 using clean crusher broken hard granite coarse aggregate of 40 mm. size down grade of approved quality to be protested in the laboratory obtained from approved quarry the proportion mix, grading conforming to relevant isi/irc codes pre-approved including arranging of reinforcement as per approved drawing including hoisting, lowering concrete in layers not exceeding 150 mm thick each compacting with vibrator watering & curing for 28 days centering shuttering & finishing the exposed surface smooth providing grooves & beads where necessary including cost, conveyance royality & taxes of all labour machineries etc. required for the work complete in all respects including dismantling the centering & shuttering as per clause 800, 900, 1200 & 1800 of mord specification for rural roads 1st revision. & as per the direction of the engineer-in charge, a below gl a above gl providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia ac pipe extending through the full width of the structures with slope of 1v:20h towards drawing face complete as per direction of engineer-in- charge & & as per clause 614 of mord specification for rural roads 1st revision, reinforced cement concrete m 15 grade kilometre stone of standard design as per irc : 8 fixing in position including painting and printing etc as per drawing and as per the direction of the engineer-in-charge, ordinary kilometer stone, 200 mm stone, finishing parapet with water proofing weather coat paint of approve shade, two coat to give an even shade with all cost, conveyance including scaffolding tax, t&p, labour etc complete as per the direction of engineer-in-charge, providing and erecting direction and place identifications of semi reflective sign boards of size upto 0.90 sqm. as per irc:67 made of 2 mm thick m.s. sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70 mm width and required message, letters, figures with reflective engineering grade tape as per mord specifications of required shade and colour. supported and welded on 47 mm x 47mm of 12 swg square tube of 3050 mm height duly strengthened by 25 mm x 5 mm m/s flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with m-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and mord technical specification clause 300, 800, 1700 as per direction of the engineer in charge inter mediate board, sign board, providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per irc:67 made of 1.5 mm thick ms sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade and colour supported and welded on 47mm x 47 mm x 12 swg sheet tube firmly fixed to the ground by mean of properly designed foundations with m-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing and as per the direction of the engineer-in-charge, 900 mm equilateral triangle, 600 mm equilateral triangle, construction of rcc guard posts of 200 mm dia m15 grade cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical rcc posts not to exceed 1 in 500 as per drawing and as per the direction of the engineer-in-charge. new construction only painting of old guard posts

State Government

TRN :20859722 | 01 Jun, 2021

Tender Value : 1.10 Crore

Sundergarh - Orissa

Tender for road works - trimming grass and weeds removal of rubbish up to a distance of 30 m outside the periphey of the area as per technical specification clause 201.1of mord specification for rural roadsand as per the direction of the engineer-in-charge, construction of embakment with approved materials obtained from borrow pits with all leads and lifts transporting to site by mechanical means spreading grading to required slope compacting to meet the requirements of table 300.2 and clause 305 of mosrth specification for road and bridge works 4th revision and as per the direction of the engineer-in-charge, providing and applying tack coat with bitumen emulsion rs-1 using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per the direction of the engineer-in-charge, providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per technical specification clause 504 and as per the direction of the engineer-in-charge, providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen, transported to site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolling with smooth wheeled, vibratory roller and tandem rollers to achieve the desired compaction as per clause-508 of mosrt&h specification for road & bridge works4th revision as per specification and direction of engineer -in –charge, fine dressing & turfing including transportation of turfs by mechanical means with all leads & lifts & placing of turfs in position and ramming with thapies including watering and cost of labour and all materials etc.complete as per the direction of the engineer-in-charge, reinforced cement concrete m 15 grade kilometre stone of standard design as per irc : 8 fixing in position including painting and printing etc as per drawing and as per the direction of the engineer-in-charge, ordinary kilometer stone, 200 mm stone, providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per irc:67 made of 1.5 mm thick ms sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade and colour supported and welded on 47mm x 47 mm x 12 swg sheet tube firmly fixed to the ground by mean of properly designed foundations with m-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing and as per the direction of the engineer-in-charge, 900 mm equilateral triangle, 600 mm circular, 600 mm x 450 mm rectangular, construction of rcc guard posts of 200 mm dia m15 grade cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical rcc posts not to exceed 1 in 500 as per drawing and as per the direction of the engineer-in-charge, new construction, water proofing cement base painting two coats with approved paint inclusive of cost of all material, labour and t&p etc. complete and as per the direction of the engineer-in-charge, painting on concrete / steel surfaces with epoxy painting two coats including prime coat with epoxy paint approved brand on concrete /steel surface after through cleaning of surface to give an even shade as per drawing and technical specification clause 1701 and as per the direction of the engineer-in-charge, printing new letters & figures of any shade with enamel paint black or any other approved colour to give an even shade as per drawings and technical specification clause 1701, 5 letter, providing and fixing of typical informatory sign board with logo as per mord specifications and drawing. three ms plates of 1.6 mm thick, top and middle plate duly welded with ms flat iron 25mm x 5m size on back on edges. the lower plate will be welded with ms angle iron frame of 25mm x 25mm x 5mm. the angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 swg sheet tubes posts duly embedded in cement concrete m-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. the top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 swg steel plate tube. all m.s. will be stove enameled on both sides. lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. all sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing clause 1701 and annexure 1700.1 of mord and as per direction of the engineer-in-charge, providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per irc:35 .the finished surface to be level, uniform and free from streaks and holes and as per direction of the engineer-in-charge.

State Government

TRN :20859839 | 01 Jun, 2021

Tender Value : 2.48 Crore

Sundergarh - Orissa

Tender for road works - trimming grass and weeds removal of rubbish up to a distance of 30 m outside the periphey of the area as per technical specification clause 201.1of mord specification for rural roadsand as per the direction of the engineer-in-charge, providing, laying, spreading & compacting graded stone aggregates to wet mix macadam including premixing the materials with water at omc in mechanical mix plant, carriage of mixed materials by tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per clause-406 of mosrt&h specification for road & bridge works4th revision as per specification and direction of engineer-in-charge, providing and applying primer coat with bitumen emulsion ss-1 on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per the direction of the engineer-in-charge, providing and applying tack coat with bitumen emulsion rs-1 using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per the direction of the engineer-in-charge, providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per technical specification clause 504 and as per the direction of the engineer-in-charge, providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen, transported to site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolling with smooth wheeled, vibratory roller and tandem rollers to achieve the desired compaction as per clause-508 of mosrt&h specification for road & bridge works4th revision as per specification and direction of engineer -in –charge, earth work in stoney earth & gravel mixed with stone nad boulder not exceeding 0.014cum in volume within 50m initial lead and 1.50m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying not exceeding 0.3m in depth as per specification approved by the department & direction of the engineer-in-charge, supplying, fitting, fixing of road signboard made out of 3mm thick aluminium composite material acm sheet duly coated one side loaded with pressure sensitive encapsulated lens type high intensive grade retro-reflective sheeting complete as per morth technical specification clause 801.3 and irc -67/2001 with angle iron frame 65mm x 65mm x 6mm fixed with single angle iron post as per specification including application of two coats of enamel paint of approved quality in the form of checks white and black over the posts, fixed with m-15 grade cement concrete base of 300mm dia, 600mm depth, size of each post post as per approved drawing including cost, conveyance, royality & taxes of all materials, labour, t&p etc, complete as per direction of the e.i.c, 0.90mx0.60m rectangular, village indification board, 900mm equilateral triangle, reinforced cement concrete m 15 grade kilometre stone of standard design as per irc : 8 fixing in position including painting and printing etc as per drawing and as per the direction of the engineer-in-charge, ordinary kilometer stone, 200 mm stone, providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per irc:67 made of 1.5 mm thick ms sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade and colour supported and welded on 47mm x 47 mm x 12 swg sheet tube firmly fixed to the ground by mean of properly designed foundations with m-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing and as per the direction of the engineer-in-charge, 600 mm equilateral triangle, construction of rcc guard posts of 200 mm dia m15 grade cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical rcc posts not to exceed 1 in 500 as per drawing and as per the direction of the engineer-in-charge, new construction, water proofing cement base painting two coats with approved paint inclusive of cost of all material, labour and t&p etc. complete and as per the direction of the engineer-in-charge

Related Searched Keywords : cement concrete road

List of latest Cement-Concrete-Road Tenders in Indian Tenders. Click on any Cement-Concrete-Road Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for Cement-Concrete-Road Tenders.

Tender for construction of cement concrete road at kopamandavi tq. pandharkawada tanda vasti vikas yojna

Get cement concrete road Tender Alert...

Related Searched Keywords : cement concrete road

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us