Filters

List of latest Dismantling-Work Tenders in Indian Tenders. Click on any Dismantling-Work Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for Dismantling-Work Tenders.

All-Tenders (61)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :20859688 | 01 Jun, 2021

Tender Value : 1.64 Crore

Sundergarh - Orissa

Tender for road work - trimming grass and weeds removal of rubbish up to a distance of 30 m outside the periphey of the area as per technical specification clause 201.1of mord specification for rural roadsand as per the direction of the engineer-in-charge, construction of embakment with approved materials obtained from borrow pits with all leads and lifts transporting to site by mechanical means spreading grading to required slope compacting to meet the requirements of table 300.2 and clause 305 of mosrth specification for road and bridge works 4th revision and as per the direction of the engineer-in-charge, providing, laying, spreading & compacting graded stone aggregates to wet mix macadam including premixing the materials with water at omc in mechanical mix plant, carriage of mixed materials by tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per clause-406 of mosrt&h specification for road & bridge works4th revision as per specification and direction of engineer-in-charge, providing and applying primer coat with bitumen emulsion ss-1 on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per the direction of the engineer-in-charge, providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen, transported to site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolling with smooth wheeled, vibratory roller and tandem rollers to achieve the desired compaction as per clause-508 of mosrt&h specification for road & bridge works4th revision as per specification and direction of engineer -in –charge, earth work in excavation in hard soil or gravelly soil for foundation within 50m initial leads &1.5m initial lifts includingrough dressing and breakingclods to max 5cm to 7cm and laying in layers not exceeding 0.3m in depth etc complete as per mord sp:302.3 & direction of the engineer-in-charge, supplying and filling foundation & plinth with good clean river sand including watering to complete saturation & ramming complete with all leads & lifts including cost. conveyance royality & taxes of all materials & cost of all labour & t&p required for the work complete measurement will be taken for compacted section as per direction of engineer-in-charge, cement concrete of m-15 grade having maximum compressive strength of 150 kg/cm2 test to be conducted on 150 mm cubes tested at 28 days including curing tests conducted in accordance with is-456 & is-516 & conforming to clause-302 of irc 21/1987 using clean crusher broken hard granite coarse aggregate of 40 mm. size down grade of approved quality to be protested in the laboratory obtained from approved quarry the proportion mix, grading conforming to relevant isi/irc codes pre-approved including arranging of reinforcement as per approved drawing including hoisting, lowering concrete in layers not exceeding 150 mm thick each compacting with vibrator watering & curing for 28 days centering shuttering & finishing the exposed surface smooth providing grooves & beads where necessary including cost, conveyance royality & taxes of all labour machineries etc. required for the work complete in all respects including dismantling the centering & shuttering as per clause 800, 900, 1200 & 1800 of mord specification for rural roads 1st revision. & as per the direction of the engineer-in charge, a below gl a above gl providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia ac pipe extending through the full width of the structures with slope of 1v:20h towards drawing face complete as per direction of engineer-in- charge & & as per clause 614 of mord specification for rural roads 1st revision, reinforced cement concrete m 15 grade kilometre stone of standard design as per irc : 8 fixing in position including painting and printing etc as per drawing and as per the direction of the engineer-in-charge, ordinary kilometer stone, 200 mm stone, finishing parapet with water proofing weather coat paint of approve shade, two coat to give an even shade with all cost, conveyance including scaffolding tax, t&p, labour etc complete as per the direction of engineer-in-charge, providing and erecting direction and place identifications of semi reflective sign boards of size upto 0.90 sqm. as per irc:67 made of 2 mm thick m.s. sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70 mm width and required message, letters, figures with reflective engineering grade tape as per mord specifications of required shade and colour. supported and welded on 47 mm x 47mm of 12 swg square tube of 3050 mm height duly strengthened by 25 mm x 5 mm m/s flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with m-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and mord technical specification clause 300, 800, 1700 as per direction of the engineer in charge inter mediate board, sign board, providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per irc:67 made of 1.5 mm thick ms sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade and colour supported and welded on 47mm x 47 mm x 12 swg sheet tube firmly fixed to the ground by mean of properly designed foundations with m-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing and as per the direction of the engineer-in-charge, 900 mm equilateral triangle, 600 mm equilateral triangle, construction of rcc guard posts of 200 mm dia m15 grade cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical rcc posts not to exceed 1 in 500 as per drawing and as per the direction of the engineer-in-charge. new construction only painting of old guard posts

Central Government/Public Sector

TRN :20860005 | 24 May, 2021

Tender Value : 5.60 Lacs

Burdwan - West Bengal

Tender for dismantling of major parts of p and h 1900al shovel sl no kf00117eklabya and shifting to dragline erection yard due to the exigency of shifting of machine from face for project work

corporations/Associations/Others

TRN :20861091 | 24 May, 2021

Tender Value : 0

Patna - Bihar

Tender for dismantling of building and premises leveling work

State Government

TRN :20861470 | 03 Jun, 2021

Tender Value : 5.30 Lacs

Ukai Dam - Gujarat

Tender for rate contract for the work of dismantling, lifting, shifting, overhauling and reinstallation of lt motors for unit no. 3 to 6

corporations/Associations/Others

TRN :20862283 | 25 May, 2021

Tender Value : 8.08 Lacs

Jammu - Jammu And Kashmir

Tender for supply, erection, testing and commissioning of lt line on 8mtr pcc poles with 120mm2 abcable and dismantling of existing lt line coming in the alignment of the work construction of main drain/ nallah passing through pamposh colony from national highway near k.c hyndai to channi rama including road crossing on turnkey basis

corporations/Associations/Others

TRN :20862474 | 24 May, 2021

Tender Value : 0

Patna - Bihar

Tender for dismantling of old office building and earth leveling work

corporations/Associations/Others

TRN :20862770 | 28 May, 2021

Tender Value : 13.52 Lacs

Bijnor - Uttar Pradesh

Tender for work of reoriantation of 132 kv tajpur-tss kanth railway line panther conductor approx. 0.500 km and dismantling old line/tower

corporations/Associations/Others

TRN :20854691 | 27 May, 2021

Tender Value : 0

Barabanki - Uttar Pradesh

Tender for interlocking work to kalim house and upgrading of culvert near kalim house in ward pirbatavan western and bhitari pirbatavan from arvind kumar gupta to raish taylor, dismantling of damage old brick including material labor and t. & p. etc. all complete. class 150 brick work in cement mortar 1:4 1 cement 4 core sand in foundation and super structure as per m.o.r.d 12mm thick plaster in 1:3 cement c sand mortar including material labor and t.& p. etc. all complete. si no. 583 s/l of 25-50mm size stone ballast with consolidation including material labor and t. & p. etc. all complete. r.c.c slab work with cement approved coarse and 20mm gauge approved stone aggregate in proportion 1:2:4 including supply of all material labor and t&p etc all complete. m/s work in above r.c.c work including material labor and t.& p. etc. all complete. providing and lying 80mm thick rubber molded zigzag inter locking blocks with on 50mm loose dry sand tile of strength not less than 30 mps cement grey/ordinary red color including leveling and dressing of surface to required level and slope tile laid over 4cm thick fine sand with all labor t&p etc all complete. disposal of s/e up to 3 km distance including material labor and t.& p. etc. all complete.

State Government

TRN :20854848 | 24 May, 2021

Tender Value : 0

Bangalore - Karnataka

Tender for work of dismantling, shifting of transformers with new additional ht and lt ug cables out door and indoor pot heads kits, straight through joints with compact rmus 2od + 4vl, construction of transformer beds, earth excavation with cc flooring, new chain link fencing for cjf transformer yard @ new location for ht rr no.c2ht2 @ cjf

corporations/Associations/Others

TRN :20855311 | 26 May, 2021

Tender Value : 0

Hyderabad - Telangana

Tender for creation of infrastructural facilities construction repairs and renovation works at the english and foreign languages university campus supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 1 cement : 1.5 coarse sandzone-iii : 3 graded stone aggregate 20 mm nominal size. centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platform lintels, beams, plinth beams, girders, bressumers and cantilevers columns, pillars, piers, abutments, posts and struts stairs, excluding landings except spiral-staircases providing, hoisting and fixing up to floor five level precast reinforced cement concrete in small lintels not exceeding 1.5m clear span up to floor five level, including the cost of required centering, shuttering but, excluding the cost of reinforcement, with 1:1.5:3 1 cement : 1.5 coarse sandzone- iii : 3 graded stone aggregate 20 mm nominal size providing and laying in position machine batched and machine mixed design mix m-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per is: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer-in-charge note :- cement content considered in this item is @ 330 kg/cum. excess/ less cement used as per design mix is payable/recoverable separately. all works above plinth level upto floor v level brick work with common burnt clay f.p.s. non modular bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in : cement mortar 1:6 1 cement : 6 coarse sand providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix 1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size. providing and fixing isi marked oxidised m.s. tower bolt black finish, barrel type with necessary screws etc. complete 200x10 mm providing and fixing isi marked oxidised m.s. handles conforming to is:4992 with necessary screws etc. complete 100 mm providing and fixing factory made upvc white colour fixed glazed windows/ventilators comprising of upvc multi-chambered frame and mullion where ever required extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length shape & size according to upvc profile, upvc extruded glazing beads of appropriate dimension, epdm gasket, g.i fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. profile of frame shall be mitred cut and fusion welded at all corners, mullion if required shall be also fusion welded including drilling of holes for fixing hardwares and drainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of engineer-in-charge. single / double glass panes and silicon sealant shall be paid separately. note: for upvc frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. fixed window / ventilator made of small series frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. area upto 0.75 sqm. supplying and fixing rolling shutters of approved make, made of required size m.s. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to is: 4454 - part 1 and m.s. top cover of required thickness for rolling shutters. 80x1.25 mm m.s. laths with 1.25 mm thick top cover providing and fixing ball bearing for rolling shutters. extra for providing mechanical device chain and crank operation for operating rolling shutters exceeding 10.00 sqm and upto 16.80 sqm in the area providing and fixing m.s. fan clamp type i or ii of 16 mm dia m.s. bar, bent to shape with hooked ends in r.c.c. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete. providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. m.s. tube unit weight is considered as per the drawing fixing glazed/ ceramic/ vitrified floor tiles with cement based high polymer modified quick-set tile adhesive water based conforming to is: 15477, in average 3mm thickness providing and laying vitrified tiles in different sizes thickness to be specified by manufacturer, with water absorption less than 0.08 % and conforming to i.s. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 1 cement: 3 coarse sand, jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. size of tile 600x600 mm providing and fixing on wall face unplasticised - pvc moulded fittings/accessories for unplasticised - rigid pvc rain water pipes conforming to is : 13592 type a including jointing with seal ring conforming to is : 5382 leaving 10 mm gap for thermal expansion. coupler 75mm 110 mm single pushfit coupler: 75mm 110 mm single tee with door 75x75x75mm 110x110x110 mm single tee without door 75x75x75mm 110x110x110 mm bend 87.50 75mm bend 6 mm cement plaster 1:3 1 cement : 3 fine sand finished with a floating coat of neat cement and thick coat of lime wash on top of walls when dry for bearing of r.c.c. slabs and beams. distempering with 1st quality acrylic distemper ready mixed having voc content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification. two or more coats on new work finishing walls with acrylic smooth exterior paint of required shade : new work two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work dismantling of flexible pavement bituminous courses by mechanical means and disposal of dismantled material up to a lead of 1 kilometre, as per direction of engineer-in-charge providing, laying, spreading and compacting graded stone aggregate size range 53 mm to 0.075 mm to wet mix macadam wmm specification including premixing the material with water at omc in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of engineer-in-charge. constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 1 cement : 4 coarse sand including 500x450 mm pre-cast r.c.c. horizontal grating with frame complete as per standard design : with common burnt clay f.p.s. non modular bricks of class designation 7.5 providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by engineer-in-charge and consisting of : i ist layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 1 cement : 3 coarse sand mixed with water proofing compound conforming to is:2645 in the recommended proportion over the leveling course leveling course to be paid separately. joints sealed and grouted with cement slurry mixed with water proofing compound. ii 2nd layer of 25 mm thick cement mortar 1:3 1 cement: 3 coarse sand mixed with water proofing compound in recommended proportions. iii finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer. using rough kota stone. providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to is:2645 in recommended proportions with a gap of 20 mm minimum between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 1 cement : 3 coarse sand 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by engineer-in-charge : using rough kota stone electrical items. wiring for circuit/ submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required. 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire 2 x 4 sq. mm + 1 x 4 sq. mm earth wire 2 x 6 sq. mm + 1 x 6 sq. mm earth wire 2 x 10 sq. mm + 1 x 6 sq. mm earth wire supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. single pole supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm supplying and fixing following size/ modules, gi box alongwith modular base & cover plate for modular switches in recess etc. as required. 3 module 100mmx75mm 8 module 125mmx125mm 12 module 200mmx150mm supplying and fixing 3 pin, 5 a ceiling rose on the existing junction box/ wooden block including connections etc. as required. installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm frls pvc insulated, copper conductor, single core cable and earthing etc. as required. installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length upto 30 cm with 1.5 sq. mm frls pvc insulated, copper conductor, single core cable etc. as required. installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. upto 450 mm sweep supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. but without mcb/rccb/isolator 6 way, double door supplying and fixing single pole blanking plate in the existing mcb db complete etc. as required. supplying and fixing following rating, four pole, 415 v, isolator in the existing mcb db complete with connections, testing and commissioning etc. as required 63 a laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. upto 35 sq. mm above 185 sq. mm and upto 400 sq. mm supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required. 4 x 16 sq. mm 28mm excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres. providing and laying in position cement concrete 1:3:6 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size in foundation of pump, dg set etc including form work etc as required providing and laying in position reinforced cement concrete 1:2:4 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size in foundation of pump, dg set etc including form work etc as required excluding reinforcement. installation, testing and commissioning of pre-wired, 2 feet 15w led light fixture on wall / ceiling as per the engineer in charge, including connetion with 1.5 sq.mm fr pvc insulated, copper conductor, single core cable and earthing etc. as required. supply of 18 w indoor decorative surface mounted luminaire with 1 nos. 18w led of length 4 feet tube light, supply of 15 w indoor decorative surface mounted mirror luminaire with 1 nos. 10w led of length 2 feet tube light, supply of 48 1200mm sweep 5 star rated bldc brush less direct current ceiling fan with double ball bearings, input voltage 230v ac converted to 24 v dc, power input not more than 32w, air delivery 210/220 cubic meter/min with remote and without regulator. supply of 9 225mm, light duty exhaust fan with double ball bearing and wire guard etc complete. supply, installation, testing and commissioning of k-lite id no: kl 4226 jado stone bollard 12w led ww dim: 200x110x1000mm color : graphite grey including accessories supply, installation, testing and commissioning of k-lite id no: kl 4823 sleek bollard flat top translucent 8w led ww dim: 100dia x 1005mm color : graphite grey supply, installation, testing and commissioning of k-lite id no: 5368 tagalog 50w led ww dim: 465x5505120mm k-lite id no: kp-4792 flat lighting poles 139.7 dia x 76.1dia x 4270mm color : black, kp: 4792 foundation bolt for 4 nos fb with 2 nuts & 2 washer m16 x 300mm color : black supply, installation, testing and commissioning of k-lite id no: kl- 5040 juno 60w led ww dim: d2 600 dia x 422mm color : black, k-lite id no: kp-4792 flat lighting poles 139.7 dia x 76.1dia x 4270mm color : black, kp: 4792 foundation bolt for 4 nos fb with 2 nuts & 2 washer m16 x 300mm color : black removing and replacing of k-lite id no: kp - 4294 amy 50w led ww dim: d6 377 x 148 x 51mm supply, loading, transportation unloading at site, storages at site, shifting from storage place to site of following sizes of xlpe insulated pvc inner sheathed, frls outer sheathed, aluminium conductor armoured power cable of 1.1 kv grade conforming to is amended upto date and as per specifications. 4 c x 16 sqmm xlpe cable supply of pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following sizes 4c x 6 sqmm aluminium armoured cable 2c x 6 sqmm aluminium armoured cable

Related Searched Keywords : dismantling work

List of latest Dismantling-Work Tenders in Indian Tenders. Click on any Dismantling-Work Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for Dismantling-Work Tenders.

Tender for dismantling of major parts of p and h 1900al shovel sl no kf00117eklabya and shifting to dragline erection yard due to the exigency of shifting of machine from face for project work

Tender for dismantling of building and premises leveling work

Tender for rate contract for the work of dismantling, lifting, shifting, overhauling and reinstallation of lt motors for unit no. 3 to 6

Tender for dismantling of old office building and earth leveling work

Tender for work of reoriantation of 132 kv tajpur-tss kanth railway line panther conductor approx. 0.500 km and dismantling old line/tower

Get dismantling work Tender Alert...

Related Searched Keywords : dismantling work

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us