Filters

List of board Tenders

List of latest board Tenders in Indian Tenders. Click on any board Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for board Tenders.

All-Tenders (170)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35883349 | 20 Nov, 2025

Tender Value : 0

Ahmednagar - Maharashtra

Tender for providing following materials - excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.5 m.) bd.a.1 page no. 259 ssr item no 21.02 excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.50 m) bd.a.2 page no. 259 ssr item no 21.06 providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. bd.a. 12 page no. 264 ssr item no ssr item no 21.38 providing and laying cast in situ/ready mix cement concrete in m-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based plc with scada enabled reversible drum type mixer/concrete batch mix plant (pan mixer) etc. complete. with natural sand/v.s.i. quality artificial sand bd. e. 1 page no. 287 ssr item no 24.01 providing and laying in situ/ready mix cement concrete m-20 of trap / granite /quartzite/ gneiss metal for r.c.c. work in foundations like raft, strip foundations, grillage and footings of r.c.c. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with natural sand/v.s.i. quality artificial sand bd.f.3 page no. 298 and b.7, page no.38 ssr item no 25.11 providing and laying cast in situ/ready mix cement concrete m-20 of trap / granite /quartzite/ gneiss metal for r.c.c. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(excluding reinforcement and structural steel).with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with natural sand/v.s.i. quality artificial sand bd.f.5 page no. 300 and b.7, page.no. 38 ssr item no 25.31 providing and laying cast in situ/ready mix cement concrete m-20 of trap / granite /quartzite/ gneiss metal for r.c.c. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (excluding reinforcement and structural steel). with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with natural sand/v.s.i. quality artificial sand bd.f.6 page no. 300 and b.7, page no.38 ssr item no 25.50 providing and laying cast in situ/ready mix cement concrete m-20 of trap/ granite/ quartzite/ gneiss metal for r.c.c. chajja as per detailed design and drawings including centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (excluding reinforcement and structural steel).with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with natural sand/v.s.i. quality artificial sand bd.f.9 page no. 303 and b.7, page no.38 ssr item no 26.05 providing and laying cast in situ/ready mix cement concrete m-20 of trap/ granite / quartzite/ gneiss metal for r.c.c. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(excluding reinforcement and structural steel).with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with natural sand/v.s.i. quality artificial sand bd.f.8 page no. 302 and b.7, page no.38 ssr item no 25.70 providing and fixing in position tmt - fe - 500 bar reinforcement of various diameters for r.c.c. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. bd.f.17, page no. 306 ssr item no 26.33 providing second class burnt brick masonry with conventional/ i.s. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. complete. bd.g. 1 page no. 313 ssr item no 27.01 filling in plinth and floors with contractors material/brought from outside and approved by engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. bd.a.11 page no. 263 ssr item no 21.37 providing second class burnt brick masonry with conventional/ i.s. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. complete bd.g.5 page no. 315 ssr item no 27.05 providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 with neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. bd.l.1 page no. 367 ssr item no 32.01, 32.15 providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 with neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. bd. l.2 page no. 368 ssr item no 32.01, 32.15 providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.spec. no.: bd.l.7 page no. 369 ssr item no 32.11 providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to i.s.15622/2006 (group d ii-a) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. ssr item no 33.24 providing sills of polished kadappa stone 25mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning etc. complete. bd.m.29 page no. 391 ssr item no 33.20 providing and laying antiskid ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to is 15622-2006 (group-b iia) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing complete. ssr item no 33.67 providing and fixing solid core flush door shuttercommercial in single leaf 30 mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steel hinges and cromium plated fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete.spec. no.: bd-t-36, page no. 500 ssr item no 39.10 providing and fixing in position (as per 1868 / 1982) aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kilogram/running metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kilogram/running metre.. top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kilogram/running metre. the shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kilogram/running metre. inter locking section 40 x 18 x 1.10 mm at weight 0.469 kilogram/running metre. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kilogram/running metre. as per detailed drawings and as directed by engineerincharge ssr item no 39.44 providing and fixing mild steel grill work weighing 20 kg / sqm. for windows, ventilators etc. as per drawing including fixtures, necessary welding & painting with one coats of anti corrosive paint & two coats of oil painting complete. ssr item no 40.01 providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding i.s. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. ssr item no 35.25 providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete. ssr item no 36.12 providing and fixing m40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to i.s. 65241983 having 6 mm dia. bars 3 nos. and stirrups @250 mm c/c and fixing in wall with 6 nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm . ssr item no 39.56 providing and applying two coats of lead/zinc base oil paint/bituminious paint of approved colour to new structural steel work and iron work in buildings including scaffolding if necessary, cleaning and preparing the surface etc. complete.(excluding primer coat). ssr item no 35.04 providing water proof bedding for flooring of bath and wc 25 mm thick in c.m. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of rs.500/- including ponding test etc. complete. ssr item no 31.05 providing and fixing 40mm diameter and 1.5 mm thick stainless steel hand railing in s.s.304 grade including fabricating ,fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete ssr item no 40.06 providing and fixing heavy duty inter locking concrete coloured paving blocks of 60 mm thickness of having a strength of 300 kilogram/sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete ssr item no 33.51 providing and fixing board displaying information, such as 'name of work, tender cost, name of contractor, work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on m.s.angle of size 35 x 35 x 3 mm frame with properly cross braced m.s. angles of size 35mmx35mmx3mm duly painted including two m.s. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. spec. no. as directed by engineer in charge ssr item no 6.36 material testing charges for work constructing one room z p primary school building dighewasti at chambhurdi tal shrigonda

State Government

TRN :35883764 | 25 Nov, 2025

Tender Value : 0

Nasikcity - Maharashtra

Tender for supply of stationary and other items - rubber stamp with arrow symbol on both sides ink pad (purple) 95 mm x 52 mm matchbox rubber stamp with distinctive symbol (minimum diameter of stamp 27 mm) simple pencil-1 ball pen blue-3 ball pen red-1 blank paper 8 large pieces (sheets) legal size pins (pins) 25 pcs (minimum 25 pcs in a packet) lakshmi – 6 sticks box weight 400 grams 12.5 mm x 12.5 mm x 6.5 inches minimum diameter 15 mm materials for polling booth -2+2=4 gum paste 1 bottle blade-1 candles-4 (good quality minimum diameter (thickness) 2 cm minimum length 20 cm metal strip-1 thin twine tread) 1 ball of 10 meters length carbon paper-3 pcs. camelin single site 330 mm x 210 mm packaging paper-2 sheets packing slip in control unit cloth or rag for wiping oil etc.-3 sizes – 15”x9” drawing pins-1 packet of 25 pcs checklist-2 rubber bands-1 packet of 25 pcs. nylon sellotape-1 minimum width ½ inch length 10 meters bag for keeping voting materials size 80 cm x 50 cm voting room (for 2 bu) size 7 feet length x 3 feet height voting room (for 3 bu) size 9 feet length x 3 feet height jumbo stapler kangaro (hd-23/17) medium stapler kangaro (hp-45) stapler small 10 no. stapler pin no. 10 kangaro (1 box of 20 boxes) stapler pin no. 24/6 kangaro (1 box of 20 boxes) jumbo stapler pin kangaro 23/17 paper cutter – large 18mm paper cutter – small 9mm cello tape cutter iron 18mm rubber band large size (4 inch) ½ kg packet rubber band small size (2 inch) 1 kg packet nylon rubber band small size ½ inch 1 kg packet calculator large casio 12 digit glue stick 8gm fevistick large 25gm fevistick small 15gm fevicol 120 gm punching machine kangaro (dp-500) punching machine kangaro (dp-280) industrial punching machine kangaro (dp- 800-900) highlighter pen (camlin) lexi pen (blue) lexi pen (red) sketch pen (kores) (1 pack of 12 sketch pens) sketch pen - black, blue, red (kores) (1 pack of 12 sketch pens) marker pen small (thick) (blue, red, black) marker pen large (thick) (blue, red, black) permanent marker camlin white board marker camlin whitener pen camlin safety pin box (1 box of 1000 pieces) scale plastic large (camel) 12 inch scale metal large (camel) 12 inch scale wooden large (camel) 12 inch metal pusher plate 24 inch stamp pad large size (camel) 15.7cm x 9.7cm stamp pad small size (camel) (blue and red) 9.5cm x 5cm stamp pad ink bottle (camel) (blue and red) 100ml pencil box (camlin supreme) rubber (non dust) dink bottle (camel) (300 ml) dink bottle (camel) (150 ml) dink bottle (camel) (50 ml) cello tape large size (2 inch) cello tape small size (1 inch) cello tape small size (1/2 inch) cello tape large size (1.5 inch) cello tape large size (3 inch) cotton tape 1 inch cello tape cutter iron (dispenser) water sponge canister (superior quality) plastic bubble bags for evm storage 23”x36” pendrive (16 gb) pendrive (32 gb) pendrive (64 gb) usb hard disk 1 tb icard holder with lace (plastic) xerox paper a-4 size ( b 2 b paper) xerox paper legal size ( b 2 b paper) box file (cardboard) box file (regzin) box file (spring) mini plastic file f/s office file simple office file (spring) meeting pad 10 pages conference pad 40 pages exam pad register 1 quire (full size) prime register 2 quire (full size) prime register 3 quire (full size) prime register 6 quire (full size) prime carbon paper (blue) 100 sheet box camlin/ kores envelopes large size (brown) 11x5 per hundred envelopes medium size (brown) 9.5x 4.5 per hundred envelopes a-4 size (brown) per hundred envelopes legal size (brown) per hundred envelopes a-4 size thick (green cloth) envelopes legal size thick (green cloth) 2 flap folder (follo) 4 flap folder (follo) strip file (plastic) (a-4 size) brown paper large size 23 inch x 36 inch plastic laminated envelope - a-4 ruling paper (full size) rim tracing paper rim other rubber stamps (1 line rubber stamp upto 3 inch) rubber stamp with distinctive mark (doubled) stamp each next line plastic tray (12 x18) (wonder) pigeon box (6 compartments) (15" x 10") wooden toch tag (red) 1 box of 500 pieces nylon lace white 24 inch lock 7 lever (double key) (godrej shakti) lock simple (40mm) (godrej shakti) lock 8 lever (double key) (link) lock simple (round 65) (double key) (link) thick rope bundle (20mm 10 meter long ball) lakkandi 250 grams (one box of 10 pieces) box weight 400 grams 12.5cm x 12.5cm x 6.5” candle (big size) one box of 10 pieces diameter 2cm, length 20cm/ minimum diameter 15cm chalk box (white) (100 chalks per box) (tiger) twine bundle / per kg matchbox (10 boxes per box) lime powder 1 kg gunny bag cloth bag (2 x3 feet) razor blade 10 pcs packet mosquito incense stick (coil) khile chambhari 25 pcs packet sticky notes 2” x 2” inch four color paper flag large 25mm x 75mm tissue paper packet plastic bucket, 15 liters plastic mug, 500 ml plastic dustbin, 1 foot plastic dustbin, 3 feet cholin spray small 250 ml room freshener kadhai medium stove pali (large spoon) sandshi phenyl small bottle 200 ml bleaching powder 100 grams sachet iron box (78 x 63 x 42.5 ) cm iron box (78 x 53.5 x 32 ) cm screwdriver medium broom spiral diary 8 no. cd dvd (4.7 gb) cd cover khadi bag cello pen gel batches 3”x3”

Central Government/Public Sector

TRN :35884168 | 24 Nov, 2025

Tender Value : 0

Bangalore - Karnataka

Tender for gem bids for cleaning, flannellette rolls of cm width q3, cotton stockinette asper is 3326 q3, cleaning duster v3 q3, markin clothv2 q3, ethyl acetate q3, scouring pads q3, sawdust ongc q3, contact cleaner spray, car dash boardcleaner, glass polish cleaner, car polish, rust remover

Central Government/Public Sector

TRN :35884425 | 01 Dec, 2025

Tender Value : 0

North 24 Paragana - West Bengal

Tender for repair/maint/replacement of lt feeder pillar / panels boards, switch gear / replacement of mccbs, lt cables at domestic area of af stn barrackpore under ge af barrackpore

Central Government/Public Sector

TRN :35884701 | 24 Nov, 2025

Tender Value : 0

Kupwara - Jammu And Kashmir

Tender for gem bids for adm, nutan batti stove, wicks for nutan batti stove, acrylicsheet 6 x 4 feet 4 mm, pressure cooker 3 ltr, tube light20w, 15 amp single socket board, fire protection blankets

State Government

TRN :35868642 | 27 Nov, 2025

Tender Value : 0

Satna - Madhya Pradesh

Tender for gem bids for air walker, leg press, surf board, rower, crosstrainer, scated puller, pushup bar, paraller bar, shoulder builder, sit up board, seating andstanding twister, chest puller

Central Government And Public Sector

TRN :35869852 | 04 Dec, 2025

Tender Value : 0

Mumbai - Maharashtra

Tender for gem bids for stationery, ball pen blue, pencil box, eraser, steel scale small 12, highligher, white board marker, note book - 200 page, sticky notes, paper clips, box file hq, stapler pin -medium, stapler pin - medium, punching machine big, squarelabels 0.94 x 0.5 white color inches, calculator- electronicsof 12 digit, scissors, cardboard exam pad, backpack, diaries sundaram

Central Government/Public Sector

TRN :35870419 | 22 Nov, 2025

Tender Value : 0

Kolkata - West Bengal

Tender for gem bids for 1 yard-3022 20 men inflatable life raft ncd3921 mc-340501023000, 2 yard-3022 rigginng itemfor securing life rafts mc-340501024000, 3 yard-3022 on board spares for life raft items mc-340501981500, 4 yard-3022 hydrostatic releaseunit as per liferaft mc-340501023001, 5 yard-3022 documentation for life raft as per tsp mc-340501981550, 6 yard-3023 20 men inflatable liferaft ncd 3921 mc-340501023000, 7 yard-3023 rigginng item for securing life rafts mc-340501024000, 8 yard-3023 on board spares for liferaft items mc-340501981500, 9 yard-3023 hydrostatic release unit as per liferaft mc-340501023001, 10 yard-3023 documentation for liferaft as per tsp mc-340501981550, 11 yard-3024 20men inflatable life raft ncd 3921 mc-340501023000, 12 yard-3024 rigginng item for securing liferafts mc-340501024000, 13 yard-3024 on boardspares for life raft items mc-340501981500, 14 yard-3024 hydrostatic release unit as perliferaft mc-340501023001, 15 yard-3024 documentation for life raft as per tsp mc-340501981550

corporations/Associations/Others

TRN :35870554 | 28 Nov, 2025

Tender Value : 14.96 Lacs

Ranchi - Jharkhand

Tender for gem bids for custom bid for services - supply and installation ofsign boards

Central Government/Public Sector

TRN :35870838 | 24 Nov, 2025

Tender Value : 0

Bangalore - Karnataka

Tender for gem bids for screwdriver set hex philips flathead as per pdf uploaded, soldering kit iron stand solder wire desoldering pump asper pdf uploaded, precision pliers and tweezers set as perpdf uploaded, wire cutter stripper as per pdf uploaded, heat gun for shrink tubing as per pdf uploaded, electricaltape heat shrink tubing as per pdf uploaded, digitalcaliper as per pdf uploaded, power supply unit dc variablebench power supply as per pdf uploaded, mini bench vicewith clamp as per pdf uploaded, tool organizer box as perpdf uploaded, hot glue gun industrial grade as per pdfuploaded, propellers various sizes as per pdf uploaded, motors brushless coreless as per pdf uploaded, escselectronic speed controllers as per pdf uploaded, flightcontrollers as per pdf uploaded, lipo batteries variouscapacitors as per pdf uploaded, carbon fiber or plasticframes as per pdf uploaded, connectors xt60 jst as perpdf uploaded, adhesives expory super glue as per pdfuploaded, power distribution boards as per pdf uploaded, gps modules as per pdf uploaded, miscellaneousconsumables velcro straps cable tie as per pdf uploaded, firmware update tools usb to uart software as per pdfuploaded, frame as per pdf uploaded, landing gear as perpdf uploaded, gps module and compass as per pdfuploaded, telemetry system as per pdf uploaded, fpvcamera and video transmitter as per pdf uploaded, gimbaloptional if using for aerial photography or video as per pdfuploaded, miscellaneous components as per pdf uploaded, ground control system optional transmitter tx and rx asper pdf uploaded /bid number: gem/2025/b/6880076* /dated: 12-11-2025 & & / bid document1 / 25

Related Sub Industries : Paper And Paper Products

List of board Tenders

Tender for gem bids for cleaning, flannellette rolls of cm width q3, cotton stockinette asper is 3326 q3, cleaning duster v3 q3, markin clothv2 q3, ethyl acetate q3, scouring pads q3, sawdust ongc q3, contact cleaner spray, car dash boardcleaner, glass polish cleaner, car polish, rust remover

Tender for repair/maint/replacement of lt feeder pillar / panels boards, switch gear / replacement of mccbs, lt cables at domestic area of af stn barrackpore under ge af barrackpore

Tender for gem bids for adm, nutan batti stove, wicks for nutan batti stove, acrylicsheet 6 x 4 feet 4 mm, pressure cooker 3 ltr, tube light20w, 15 amp single socket board, fire protection blankets

Tender for gem bids for air walker, leg press, surf board, rower, crosstrainer, scated puller, pushup bar, paraller bar, shoulder builder, sit up board, seating andstanding twister, chest puller

Tender for gem bids for custom bid for services - supply and installation ofsign boards

Get Board Tender Alert...

Related Sub Industries : Paper And Paper Products

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us