Filters

List of bus-bar Tenders

List of latest bus-bar Tenders in Indian Tenders. Click on any bus-bar Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for bus-bar Tenders.

All-Tenders (30)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government / Public Sector

TRN :35866251 | 24 Nov, 2025

Tender Value : 0

Sambalpur - Orissa

Tender for supply of expansion type terminal connector suitable for 36 mm aluminum tubular bus bar to suit 25 kv isolator terminal pad (6481 & 6482) spec: ti/spc/ohe/fittings/0130- 10/13-rev-1, as per drawing no: eti psi p 6480-1, complete assembly.

Central Government/Public Sector

TRN :35855093 | 15 Nov, 2025

Tender Value : 25.00 Lacs

Jodhpur - Rajasthan

Tender for servicing / maintenance / repair / replacement of busbar chambers lt ug cables, lt panels, junction boxes, lt oh line, servo voltage stabilizer and allied services and repair / maint of ht electric supply

Central Government/Public Sector

TRN :35844031 | 01 Dec, 2025

Tender Value : 0

Bhusawal - Maharashtra

Tender for supply of set of copper busbars for 7775 kva trans [set of copper busbars for 7775 kva transformer, one set consists of following 02 items (1) busbar copper type 70 as per spec clw/es/3/0412 alt-h or fig 39 of spec clw/es/3/0118 alt-m, qty- 02 nos. (2) busbar copper type 71 as per spec clw/es/3/0412 alt-h or or fig 40 of spec clw/es/3/0118 alt-m, qty- 02 nos. (item reserved for clw approved sources only)]

Central Government And Public Sector

TRN :35852106 | 21 Nov, 2025

Tender Value : 15.04 Lacs

Chandigarh - Punjab

Tender for gem bids for bus trunking , laying and fixing of one number pvc insulated and pvc sheathed or xlpe power cable above 35 sq. mm and upto 95 sq. mm on cable tray as required , laying and fixing of one number pvc insulated and pvc sheathed or xlpe power cable above 95 sq. mm and upto 185 sq. mm on cable tray as required , laying and fixing of one number pvc insulated and pvc sheathed or xlpe power cable above 35 sq. mm and upto 95 sq. mm on wall surface as required , laying and fixing of one number pvc insulated and pvc sheathed or xlpe power cable above 185 sq. mm and upto 400 sq. mm on wall surface as required , lt cable end termination , providing and fixing 6 swg dia g.i. wire on surface or in recess , installation of existing ms cable tray on the existing surface of wall

Central Government/Public Sector

TRN :35832411 | 15 Nov, 2025

Tender Value : 3.57 Lacs

Asansol - West Bengal

Tender for repairing of a boom mounting area, boom pin inserting area andarm pin inserting area.b arm crack welding, bucket fitment main pin worn out bush seat rebuilding, machining and bush fitting and crack welding of top of boom with v-grove cutting repairing of aboom mounting area, boom pin inserting area andarm pin inserting area.barm crack welding, bucket fitment main pin worn out bush seat rebuilding, machining and bush fitting and crack welding of top of boom with v-grove cutting

State Government

TRN :35834430 | 29 Nov, 2025

Tender Value : 68.1 Thousand

Midnapur - West Bengal

Tender for repair of baranigui bus stand chatal tree guard

corporations/Associations/Others

TRN :35824954 | 17 Nov, 2025

Tender Value : 0

Tuticorin - Tamil Nadu

Tender for gem bids for st010370115-reheater front bottom bend 06 st010370116-reheater front bottom bend 05 st010370117-reheater front bottom bend 04 st010370118-reheater front bottom bend 03 st010370157-insert - tp 347h d635x4 - t22 d54x56 st010370158-dmw tp 347h d54x4 - t22 d54x56 st010370159-insert - tp 347h d635 x 4 -t91 d54 x 5 st010370160-dmw - tp 347 h d54 x 4 -t91 d54 x 4 st010370122-reheater rear bottom bend 04 st010370123-reheater rear bottom bend 03 st010370161-insert-tp 347h d635 x 5-t91 d54 x 5 st010370162-dmw-tp 347h d635x5 - t22 d635x71 st010420126-sleeve for furnace front water wall tube st010420127-insert t91 d51x71- t22 d445x71 st010410069-div sh bend var 06 st010410070-div shbend var 07 st010410071-div sh bend var 08 st010410072-div sh bend var 09 st010410073-div shbend var 10 st010420093-platen sh bend var 16 st010450002-tube of d334x635 grade sa106 grc st010450008-tube of d213x478 grade sa335p22 st010450010-tube of d483x714 grade sa335p22 st010450022-tube of d334x635 grade sa335p22 sc110460033-upper adjustment ring-7005 sc110460034-lower adjustment ring-7005 sc110460001-spindle-7001-1750wb sc110460002-guide-7005 -1750wb sc110460664-lift stop-7000 sc110460665-overlapcollar-7005 sc110460667-lock nut-7001 sc110460668-split pin- 29x45 -ss-7000 sc110460669-split pin-29x36 -ss-7009 sc110460077-disc holder 7005for 1750wb sc110460078-disc collar 7005 for 1750wb sc110460082-disc-7005 for 1750wb sc110460036-adjustment ring pin lower-7135 sc110460671-overlapcollar-7001 sc110460079-disc holder 7001 for 1740wb bid number gem2025b6860553 dated 07-11-2025 bid document1 96 1 1 , sc110460649-top sp wshr assy-7010-1740wd for mssv, sc110460650-bot sp washer-7010-1740wd for mssv, sc110460004-guide-7010-1740wd for ms sv, sc110460653-seat bushing-7501 -1538vx-10w for mssv, sc110460655-pilot stem-7506 -1538vx-10w for mssv, sc110460656-pil.seat bushng-7506 -1538vx-10wfor ms sv, sc110460715-pilot valve gasket -seatbushing-7506, sc110460716-pilot valve gasket -solenoid plunger- 7506, sc110460016-pilot valve seatbushing-7506, sc110460018-pilot valve stem-7506, sc110460019-pilot valve disc-7506, sc110460020-mainvalve c-seal-7501, sc110460276-main valve seat bushing-7501, sc110460022-main valve disc-7501, sc110460703-main valve guide-7501, sc110460704-main valve stopwasher-7501, sc110460061-gasket -solenoid plunger, sc110460043-adjustment ring pin-7001, sc110460054-disc-7003 for 1786we and 1786wb, sc110460651-guide-7012 -1786we-6x8 for hrh sv, sc110460657-p.seatbushing-7520 -1525vx for hrh sv, sc110460658-sealring -p-no.1889801-7520 -1525vx, sc110460692-diskholder-7012, sc110460693-disk collar-7002, sc110460695-overlap collar-7003, sc110460697-locknut-7000, sc110460682-disk holder-7003, sc110460685-overlap collar-7081, sc110460652-guide-7081 -1786wb-6x10 for crh sv, sc110460684-lift stop-7003, sc110460012-main spring -p-no.4125101-7520 for 1525vx, sc110460013-disc main-7520for 1525vx, sc110460023-piston ring-7520 for 1525vx, sc110460024-seat ring-7520 for 1525vx, sc110460025-pilot disc-7520 for 1525vx, sc110460026-pilot stem-7520for 1525vx, sc110460027-pilot seat bushing-7520 for1525vx, sc110460031-spring pilot-7520 for 1525vx, sc110460718-guide-m- 7520, sc110460719-seal ringretnr.-7520, sc110460720-pilot disc guide-7520, sc110460726-lever pin-7501, sc110460727-washer-7501, sc110460729-split pin-2.2x19.1 -ss-7501, sc110460730-gasket-d-p.3831017-7520, sc110460731-gasket-erv - igv-7520, sc110460659-sv 1811lc6x20for soot blower sv, sc110470037-flexible wedgeassembly for asv-35-37-47 and 64, sc110470039-swgasket for asv-35-37-47 and 64, sc110471635-sw gasketfor asv-36, sc110471636-sw gasket for asv-36 -426x402x4.5, sc110470046-flexible wedge assembly forasv-48-50-61 and 63, sc110470048-sw gasket for asv-48-50-61 and 63, sc110470053-si gasket for asv-51, sc110470054-sw gasket for asv-51, sc110471637-s 96complete valve assembly - miv, sc110470100-s148complete valve assembly - mov, sc110470215-valveassembly for s30, st010080092-burner pleated panel, cs010020136-sector plate assembly-hot end, cs010020135-axial seal plate assembly withadjustors, st010360011-axial seal plate to sectorplate, st010360007-bypass seal bar assembly -hotend, st010360012-flanges near to sector plate, st010360186-guide trunnion sealing sleeve, st010360187-sealing tube of guide bearing assembly, st010250010-bowl extension ring segment -6 no per set, st010250011-bowl hub cover, st010250012-bull ringclamping ring -1 number - 1 mill requirement, st010250013-bull ring retainer, st010250019-insulationcover plate segment, st010250020-wear plate bowl hubcover, st010260002-air seal ring upper, st010260052-journal bearing keeper, st010260003-journal bearingspacer, st010260012-lock nut -grinding roll, //bid details2 / 96 st010260054-oil seal keeper, st010260019-seal wear ring, cs010020166-lower journal housing, cs010020167-upper journal housing-var-02, cs010020168-journalhead and trunnion shaft assembly, cs010020170-journal spring assembly, st010280018-journal stop bolt, st010280019-journal stop bolt bushing -journal stop boltbushing var-02, st010140266-shaft for seal air fan, sc380190137-thrust ball bearing 51211 - customised, st010140191-seal.ring sh 2xd60-d48, st010140192-seal.ring sh 2xd63-d50, st010140193-labyrinthsealing ring ld345v, st010140009-pre load springs-iid309, st010140043-spacer coupling for fd fan, sc380190136-axial thrust ball bearing 51314 -customised, st010140212-sealingring 63-4d72.9-d63.3x1.5, st010140213-sealingring 68-4d74.8-d66x1.5, st010140214-labyrinthsealingring ld 435 v, cs010020169-fan shaft

Central Government/Public Sector

TRN :35805372 | 25 Nov, 2025

Tender Value : 0

New Delhi - Delhi

Tender for gem bids for procurement, 03 305076 banjo bolt 03 305077 banjo washer 04600784 converter w300 2 point 52 ratio 1019 2019 pinpivot 44 point 45 44 point 35 x 184 1019 2062 pin pivot 103 77101 gasket fuel level sensor 120 38003 spacer 120 93201 handle righthand m6 120 93202 handlelefthand 1207 0011 bush 1207 0019 bush 1208 0015bush spring 1208 0018 liner steel 1208 0023 bush 12234401 clip 123 01426 pin hose retainer 123 02516 pipeservo link 123 03286 pipe left hand 123 04237 seal 123 05228 disc blanking 123 05557 pivot cable 12305836 clamp 123 06012 spacer 123 06023 cap sideshift stabiliser 123 07389 pin spring 8mm clevis 12307540 cap bolt cover 126 02253 link track rod m24 m22 128 c5429 frame outer rear window 128 c5856window frame left hand side 128 c5857 window frameright hand 128 c5954 door painted sealed left hand 128 c5955 door rightside 128 f6331 mounting bracketfan 128 h2997 installation silencer turbo 130 07242latch 130 07243 pin locking 1305 0716z bolt 13150509z setscrew m12 x 35mm 1315 3313z bolt m8 x 55 1315 3722z bolt m16 x 120 torque 200 210nm 13210408z setscrew m10 x 30 torque 5 point 5kgf 13210409z screw m10 x 35 1321 3311z bolt m8 x 45 13400701z nut 3 by 4 1356 0205z nut 5 by 8 bsp 13700402z nut thin m12 1370 0603z nut lock m16 13909404 screw grub 1391 3105z screw m5 x 20 13913530d cap screw m12x200 dacromet coated 1392 3108zcapscrew m5 x 30 1392 3207z capscrew m6 x 25mm 1406 0011 washer bonded 1 by 4 inch 1406 0015 washerbonded 3 by 8 inch 1406 0017 seal 1406 0018 washerbonded 1 by 2 inch bsp 1406 0021 washer bonded 14060026 washer bonded 1417 0016z washer locking 14250008z spring washer 1450 0001 nipple grease straight 1 bid number gem2025b6730401 dated 04-11-2025 bid document1 99 1 1 by 8 bsp, 1450 0002 nipple grease straight 1 by 4, 15510600 nut male 1 inch, 1604 0004 adaptor male, 16040006 adaptor 3 by 4 inch, 1604 0008 adaptor, 1606 0017adapter 5 by 8 inch x 1 by 2 inch m m, 1606 2059 adaptor, 1609 0001 adaptor, 1620 0002 adapter, 1620 0007adapter, 1620 0010 adapter includes o ring, 1620 2051adaptor 1 by 4 inch bsp x 9 by 16 inch sae, 1620 2055adaptor 39 point 5mm long m m 1 by 2 inch bsp x 7 by 8inch sae lvb, 1620 2056 adaptor lvb, 1620 2057 adaptor, 20 925552 pump assembly transmission, 2102 0417 pintension, 2201 0003 clip jubilee, 2201 0005 clip wormdrive 14 by 27mm2, 2201 0007 clip worm drive, 22010011 clip worm drive 40 by 64mm, 2201 0012 clip jubilee46 70mm, 2201 0013 clip worm drive 59 by 83mm, 22010014 clip worm drive, 2201 0015 clip worm drive 78102mm, 2203 0035 circlip, 2203 0067 circlip item 5 to befitted, 2203 1020 circlip, 2203 1082 circlip, 2203 1115circlip, 2400 0230 o ring, 2401 0213 o ring, 2401 0508o ring, 2410 0205 grommet hole diameter 12 point 7mm, 2410 1312 grommet, 25 220998 valve solenoid assembly, 25 221919 extended dipper valve, 30 925559 fan 21 inchdiameter 9 blade puller, 32 902200 strainer suction, 32915801 element air safety, 32 915802 element air main, 32 920300 element filter 125 micron torque 15 20 nm, 32925678 breather, 320 04250 dipstick assembly abi, 32006036 gasket turbo outlet, 320 07523 hose ccv outlet, 320 08547 belt front, 32ap ba100 hose 3 by 8 bsp 1000, 331 14805 plate clamp backing, 331 16517 plate pressureclutch 6 point 0 mm, 331 16519 plate shim clutch 1 point2mm a r, 331 16558 plate oil baffle, 331 18442 mountingcab lower a post, 331 20550 pad wear upper 5mm thickcolour green, 331 20552 pad wear upper 6mm thick, 33120556 pad wear upper 7mm thick, 331 25683 gaiter gearlever non soundproofed, 331 25996 mounting cab lowerred b-post, 331 28223 roller plastic, 331 28233 latchleft hand assembly, 331 28235 latch right handassembly, 331 31135 stay door leftside, 331 31136 staydoor rightside, 331 31560 plate pressure 4mm, 33134392 mounting cab upper blue a post, 331 34393mounting cab upper green b post, 331 36009 coupling, 331 45087 bar window stay, 331 46204 dipstick, 33156478 plate clamp, 331 68890 bracket exhaust mounting, 332 a0619 striker door, 332 a3063 tool chisel twinretaining pins, 332 a5841 cylinder nitrogen, 332 d4249plate compression, 332 f4944 windscreen front, 332f4945 glass leftside quarter light, 332 f4950 glassrightside quarter light, 332 f4981 tube oil filler manual, 332 f9654 steering shaft keyway, 332 g2727 hinge door, 332 g3857 cover fuse box, 332 g3860 cover inner fenderrightside, 332 g3862 console instrument, 332 g3863console heaterless, 332 g3865 cover steering columnfront, 332 g3866 cover rear steering column, 332 g3920cover inner fender leftside, 332 g3940 pivot block, 332g5100 seal left hand- rear window, 332 g5101 seal righthand- rear window, 332 g5384 seal top rail window, 332g6563 instrument cluster, 332 h3476 gauge sight 41mmaf hexagon torque 9 10 nm, 332 h7520 bush, 332 p2700horn 12v, 332 p7213 mounting resilient, 332 y0160gaiter gear lever, 332 y0161 gear lever turret assembly, 332 y0215 strap bearing, 332 y0739 decal, 332 y1125hose high pressure, 332 y1444 adjuster, 332 y1445guard stone right hand sideshift, 332 y1446 guard stoneleft hand sideshift, 332 y1474 hose, 332 y1776 throttlehand knob, 332 y2053 pipe slew, 332 y2057 pipe slew rh //bid details2 / 99

Central Government/Public Sector

TRN :35811932 | 17 Nov, 2025

Tender Value : 0

Barmer - Rajasthan

Tender for gem bids for labour for disconnecting existing ht lt supply fromdefective transformer disconnection complete all asdirected by engr-in-charge, labour for crane for liftingtransofrmer in the veh and transportation complete all asdirected by engr-in-charge, s and f hv side windings withsuitable size of copper conductor complete all as directedby engr-in-charge, s and f lv side windings with suitablesize of copper conductor complete all as directed by engr-in-charge, labour for oven charging for transformer windingscomplete all as directed by engr-in-charge, s and f newtransformer oil, low viscosity of dielectric strength completeall as directed by engr-in-charge, s and f tape, paperinsulating strings etc gently and carefully, washing of thedust, complete all as directed by engr-in-charge, painting ofthe inner and outer side of the transformer with zincchromate complete all as directed by engr-in-charge, supply and fix ht porecelain bushing complete with brasstinned complete all as directed by engr-in-charge, supplyand fix lt porecelain bushing complete with brass tinnedcopper rod complete all as directed by engr-in-charge, supply and fix tap cahnger switch 11 kv complete with rodand gasket complete complete all as directed by engr-in-charge, supply and fix breather assy with new silica gelcomplete all as directed by engr-in-charge, testing of thetransformer after repair as directed by engr-in-charge, labour for shifting of trolly mounted transformer 315 kvafrom age em sub divn to the proposed site and same will bereturn back after completion of wk complete all as directedby engr-in-charge, labour for disconnecting existing htsupply from transformer and opening the complete all asdirected by engr-in-charge, s and f gaskets of suitable sizesealing washers o rings and other consumbels such as tape, paper insulating strings etc all as reqd at site complete all asdirected by engr-in-charge, supply and fix new silica gel ofblue colour complete all as directed by engr-in-charge, dehydration filtaration of old transformer oil at site withprotable complete all as directed by engr-in-charge, s and fnew transformer oil, low viscosity of dielectric strength notless than 50 kvcomplete all as directed by engr-in-charge, m and l for dismantling motors upto 2.20 kw capacitycomplete all as directed by engr-in-charge, material andlabour for repairing servicing the 3 phase 415v electricinduction motor complete all as directed by engr-in-charge, m and l for testing of alignment of door tracks rails bothsides by complete all as directed by engr-in-charge, takingdown old unsv gears, pinion, warm gear etc and supply andfixing new gears, complete all as directed by engr-in-charge, s and f iron cable carrier rollers complete all as directedby engr-in-charge, supply in replacement of wheel bearingcomplete all as directed by engr-in-charge, s and f inreplacement of pvc sheathed multistranded flexible coppercable of 3 core 4.0 sqmm 1100 volt grade complete all asdirected by engr-in-charge, decarburizing cleaningcomplete control panel of by cleaning bus bar chambercomplete all as directed by engr-in-charge, supply in fillingof gear oil sp 320 for top up upto to required level or inreplacement of unserviceable oil complete all as directed byengr-in-charge, supply in refilling of grease includingcleaning of old grease complete all as directed by engr-in-charge, s and f in replacement of single phase preventoras per existing make and model complete all as directed byengr-in-charge, s and f in replacment of power contactor of //bid details2 / 27 capacity 40 amp, 3 pole suitable complete all as directed byengr-in-charge

Central Government/Public Sector

TRN :35812226 | 21 Nov, 2025

Tender Value : 0

Leh Ladakh - Jammu And Kashmir

Tender for gem bids for angle holder make havells oblique anchor or equipvalentwith isi marked batten holder havells oblique anchor bajaj bed switch make anchor oblique havells oblique legrandoblique indo asian bulk head fitting model nolhkl01160099 of havells or equivalent make in bajajoblique philips with cfl 08 watt change over 100 amp 4pole make havells oblique legrand oblique l and t changeover switch 32 amp 2 pole make havells oblique legrandoblique l and t change over switch 63 amp 4 pole makehavells oblique legrand oblique l and t mcb distributionbox 6 way double door spn 240 volts copper bus bar andneutral link earthing stud confo rming to is 13032 mcbdistribution box 8 way double door spn 240 volts copperbus bar and neutral link earthing stud conforming to is13032 mcb distribution box 12 way double door spn 240volts copper bus bar and neutral link earthing studconforming to is 13032 extension cord 6 oblique 16 ampmake havells oblique anchor flexible wire copperconductor 100m make finolex oblique plaza oblique polycaboblique havells gang box 4 way 4 switches 6 amp gangbox 6 way 6 switches 5 amp gang box 2 way 2 switches 5amp gang box 1 way 1 switches 5 amp gang box 8 way gi wire for earthing led bulb 7 oblique 8w make wiprooblique philips oblique syska led bulb 15 watt make wiprooblique philips oblique syska led bulb 20w make wiprooblique philips oblique syska led invertor rechargablebulb 10 watt with isi mark led bulk head fittings 10wmake bajaj oblique philips oblique crompton led flood andoutdoor lights ssk bln 50w make syska oblique wiprooblique oreva or equipvalent led tube light fitting1x20watt complete with all accessories internally pre wired andincluding connecting up with twin core twisted flexiblecopper conductor cable with suitable size led invertor bid number gem2025b6862426 dated 06-11-2025 bid document1 105 rechargable tube light fitting1x20 watt complete with allaccessories internally pre wired and including connecting led tube light fitting 1 x 9w oblique 10w 2 feet longcomplete with all accessories internally pre wired andincluding connecting main switch 32 amps 4 pole tpnconfirming to is 13947 part 3 2607 make havells obliquestandard oblique l and t main switch 63 amps 4 pole tpnconfirming to is 13947 part 3 2607 make havells obliquestandard oblique l and t main switch 100 amps 4 pole tpnconfirming to is 13947 part 3 2607 make havells obliquestandard oblique l and t mcb 6 amp make havells obliquel and t oblique standard oblique crompton greaves mcb10 amp make havells oblique l and t oblique standardoblique crompton greaves mcb 16 amp make havellsoblique l and t oblique standard oblique crompton greaves mcb 32 amp make havells oblique l and t obliquestandard oblique crompton greaves mcb 40 amp makehavells oblique l and t oblique standard oblique cromptongreaves mcb dp 32 amp make havells oblique l and toblique standard oblique crompton greaves mcb dp 40amp make havells oblique l and t oblique standard obliquecrompton greaves mcb dp 63 amp make havells oblique land t oblique standard oblique crompton greaves mcbtpn 40 amp make havells oblique l and t oblique standardoblique crompton greaves mcb tpn 63 amp make havellsoblique l and t oblique standard oblique crompton greaves ms screw full threaded 20mm 100pcs ms screw fullthreaded 25mm 100 pcs pendent holder make havellsoblique anchor or equipvalent with isi marked piano typeswitch 6 amp make anchor oblique havells oblique legrandoblique indo asian plastic body exhaust fan 200mmsweep with louvers make havells oblique cropmton obliquebajaj plastic body wall mounting fan sweep 300mm makehavells oblique cropmton oblique bajaj plug top 3 pin 16amp make anchor oblique havells oblique legrand obliqueindo asian plug top 3 pin 6 amp make anchor obliquehavells oblique legrand oblique indo asian pvc cable 10sqmm 2 core copper make finolex oblique plaza obliquepolycab oblique havells pvc cable 4 sqmm 2 core coppermake finolex oblique plaza oblique polycab oblique havells pvc cable 6 sqmm 2 core copper make finolex anchorhavells pvc casing caping elbow 25mm dia make s liteoblique pressfit oblique plaza or equivalent oblique plaza orequivalent casing caping double locked box type 25mm x1800mm long with all fiitings oblique fixtures such as teefeet l feet for inner and outer corners and joint cap with isimark casing caping double locked box type 32mm x1800mm long with all fittings oblique fixtures such as teefeet l feet for inner and outer corners and joint cap with isimark casing caping double locked box type 20mm x1800mm long with all fittings oblique fixtures such as teefeet l feet for inner and outer corners and joint cap with isimark pvc casing capnig t feet 25mm dia make s liteoblique pressfit oblique plaza or equivalent oblique plaza orequivalent pvc casing capnig l bend 25mm dia make slite oblique pressfit oblique plaza or equivalent obliqueplaza or equivalent pvc casing capnig square box 4 x 4make s lite oblique pressfit oblique plaza or equivalentoblique plaza or equivalent pvc ceiling rose 2 oblique 3terminal make anchor oblique pressfit oblique havells pvccopper cable 1 point 5 sqmm black sc 90 mtr make finolexoblique plaza oblique polycab oblique havells pvc coppercable 1 point 5 sqmm red sc 90 mtr make finolex obliqueplaza oblique polycab oblique havells pvc copper cable bid details2 105 1 1 2.5 sqmm black sc 90 mtr make finolex oblique plazaoblique polycab oblique havells, pvc copper cable 2.5sqmm green sc 90 mtr make finolex oblique plaza obliquepolycab oblique havells, pvc copper cable 2.5 sqmm redsc make finolex oblique plaza oblique polycab obliquehavells, pvc copper cable 4 sqmm green sc 90 mtr makefinolex oblique plaza oblique polycab oblique havells, pvcswich bd 8 x 10 make havells oblique anchor, pvc switchbd 4 x 6 make havells oblique anchor, pvc tape insulation25 mm wide 9 mtr long make steelgrip oblique anchoroblique kinjal, socket 3 pin 16 amp make anchor obliquehavells oblique legrand oblique indo asian, socket 3 pin 6amp make anchor oblique havells oblique legrand obliqueindo asian, street light led 120w make philips obliquesyska oblique bajaj oblique havells, street light led 30wmake philips oblique syska oblique bajaj oblique havells, street light led 60w make philips oblique syska obliquebajaj oblique havells, sunmica bd with wooden bd 4 x 4, sunmica bd with wooden bd 4 x 6, sunmica bd withwooden bd 8 x 10, switch 15 oblique 16 amp make havellsoblique anchor oblique bajaj, switch 5 oblique 6 amp makehavells oblique anchor oblique bajaj, switch socketcombination 5 pin 16 amp with gang box make anchoroblique havells oblique legrand oblique indo asian, switchsocket combination 5 pin 6 amp with gang box makeanchor oblique havells oblique legrand oblique indo asian, smoke alarm, xlpe insulated pvc seathed heavy dutyarmoured multi core cable 6 sqmm 2 core aluminumconductor for working, xlpe insulated pvc seathed heavyduty armoured multi core cable 10 sqmm 2 core aluminumconductor for working voltage, xlpe insulated pvc seathedheavy duty armoured multi core cable 16 sqmm 2 corealuminum conductor for working voltage 1100 volt, xlpeinsulated pvc sheathed heavy duty armoured multi corecable 35 sqmm 3.5 core aluminium conductor for workingvoltage, xlpe insulated pvc sheathed heavy dutyarmoured multi core cable 50 sqmm 3.5 core aluminiumconductor for working voltage, fd water heating tank 500ltr with motor bhatti, water hammam 50 ltr, ppr socketouter dia 40 mm, silicon tape, insulation for 40mm outerdia pp r pipe pn 20 oblique sdr 63 layers of size 28mm x19mm with isi mark, insulation for 32mm outer dia pp rpipe pn 20 oblique sdr 63 layers of size 28mm x 19mmwith isi mark, glass shelf of toughned glass with chromiumplated steel frame, corner shelf of toughned glass withchromium plated steel frame, cp towel rail 600mm long20mm dia, waste pipe for wash basin, pvc s trap 75mmmake prince oblique supreme with isi marked, pvc sheetgreen, m seal 200 gm pkt make pidilite oblique fevicoloblique m seal, cp bib cock 15mm short body make ceraoblique prayag oblique polytap or equipvalent, cp bib cock20mm make cera oblique prayag oblique polytap orequipvalent, distemper, plastic emulsion paint make asiannerolac, waste pipe for urinal pot, alu tower bolt 75mmwith isi marked, looking mirror frameless of size600x450x5mm with 4mm ply baking make prayag obliquesaint gobin oblique modigaurd, puff wall panel 2900x1000mm both side white, vitreous china wash hand basinwhite flat back size 550 x 450mm long pvc connection withptmt nut 1m long pvc flexible waste pipe and bracket forholding whb, wc indian type make cera oblique hindwareoblique parryware, european wc with s feet or p feet trapconcealed of size 650 x 405 x 770mm with sheet covermake cera oblique hindware oblique parryware, vitreous //bid details3 / 105 china dry urinal bowl flat back water free odour free stainfree white colour with coupling including hdpe waste pipeand fixing accessories complete, looking mirror with pvcframe 21 x 15, hdpe water storage tank 1000 ltr 3 layermake sintex oblique polycon oblique polywell alongwith clid., hdpe water storage tank 500 ltr 3 layer make sintexoblique polycon oblique polywell alongwith clid., adhesiversolution sh make fevicol, hinges 100mm make spider withisi marked, nut bolt and washer 12mm x 4, taflon taperoll isi marked make supreme oblique omega obliqueasbestos, white cement confirming to is 8042 oblique1989 make acc oblique birla white oblique ambuja, acrylicsheet 3 feet x4 feet x3mm, bow handle oblique doorhandle make jindal oblique classic, ppgi sheet 12 feet x 3feet x 0.63mm tata oblique jindal oblique sail with isimarked, ppgi sheet 8 feet x 3 feet x 0.63mm tata obliquejindal oblique sail with isi marked, curtain rod steel, clamp for curtain, curtain ball, fire extinguisher 4.5 kg, fire extinguisher 1 kg ball type, hdpe sand bags with thinplastic inner length 630mm and width 350mm and weight80 gms minimum colour sand, kero heater batti, nailsassorted 0.5 6, paint brush 2 make spartan oblique orsonoblique laxmi, paint brush 3 make spartan oblique orsonoblique laxmi, paint red oxide make berger obliquenerolac oblique asian, plywood 6 feet x3 feet x12mm makecentury oblique duro oblique green, plywood 8 feet x4 feetx4mm make century oblique duro oblique green, plywood8 feet x4 feet x12mm make century oblique duro obliquegreen, screw full thread 1 oblique 2 75 pices, screw fullthread 1 75 pices, screw full thread 2 75 pices, screw fullthread 3 75 pices, screw full thread 4 75 pices, sliding bolt100mm with isi marked make classic, synthetic enamelpaint colour black in 20 oblique 10 ltr containers makeberger oblique nerolac oblique asian paints oblique aqualac, synthetic enamel paint colour blue in 20 oblique 10 ltrcontainers make berger oblique nerolac oblique asianpaints oblique aqualac, synthetic enamel paint colourgreen in 20 oblique 10 ltr containers make berger obliquenerolac oblique asian paints oblique aqualac, syntheticenamel paint colour white in 20 oblique 10 ltr containersmake berger oblique nerolac oblique asian paints obliqueaqualac, synthetic enamel paint colour yellow in 20oblique 10 ltr containers make berger oblique nerolacoblique asian paints oblique aqualac, cp butt hinges100mm, door hinges size 4 long medium weight steel, hydraulic door closer, peg stay, salt coarse for lighteningconductor, screw black color 1 oblique 2 feet, self tapingscrew 1 long, self taping screw 2 long, self taping screw 3long, soap dish chromium plate, steel screw 1 oblique 2size half thread isi marked 100 nos pkt, sunmica sheet 8feet x 4 feet x 3mm make shalimar, cement make ambujaoblique ultratech oblique acc, non skid ceramic tiles 300x 300mm make somany oblique kajaria oblique nitcooblique oriental oblique cera, non skid ceramic tiles 600 x600mm make somany oblique kajaria oblique nitco obliqueoriental oblique cera, angle iron 65x65x6mm thick maketata oblique sail oblique jsw, ms y pole of size65x65x6mm thick make tata oblique sail oblique jsw 8feet long, plier side cutting make taparia oblique jcboblique stanley, iron welding rod confirming to is 8142002 isi marked 3.15mm thick. 100 nos pkt, hand glovesinsulated with 2 rubber, de spanner 15 x 16 make tapariaoblique stanley oblique tata, de spanner 17 x18 maketaparia oblique stanley oblique tata, drill bits 1 oblique 8 //bid details4 / 105 in packet of 10 nos make taparia oblique bosch, drill bits 9oblique 6 in packet of 10 nos make taparia oblique bosch, drill bits metal 10 mm in pkt, drill bitt adopter 10 mmmake generic oblique bosch oblique jpt, drill bitt adopter12 mm make generic oblique bosch oblique jpt, drillingmachine portable type electrical driven make bosch obliquetiger, hacksaw blade make bosch oblique jcb, handgloves rubber, pipe wrench 14, ratchet spanner 14 x 15make vertex oblique stanley oblique tata, ratchetspanner 16 x 17 make vertex oblique stanley oblique tata, spanner ojde 14 15 make hira oblique taparia, spanner ojde 16 17 make hira oblique taparia, star bitmake generic oblique bosch oblique jpt, steel gurumala asper is code 8205, wooden gurumala as per is code 16301984, digitel clamp meter make g tech oblique flukeoblique meco, hydrometer brand ssu

Related Sub Industries : Non Classified

List of bus-bar Tenders

Tender for supply of expansion type terminal connector suitable for 36 mm aluminum tubular bus bar to suit 25 kv isolator terminal pad (6481 & 6482) spec: ti/spc/ohe/fittings/0130- 10/13-rev-1, as per drawing no: eti psi p 6480-1, complete assembly.

Tender for servicing / maintenance / repair / replacement of busbar chambers lt ug cables, lt panels, junction boxes, lt oh line, servo voltage stabilizer and allied services and repair / maint of ht electric supply

Tender for repair of baranigui bus stand chatal tree guard

Get Bus Bar Tender Alert...

Related Sub Industries : Non Classified

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us