Filters

List of channel Tenders

List of latest channel Tenders in Indian Tenders. Click on any channel Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for channel Tenders.

All-Tenders (227)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :34433538 | 15 May, 2025

Tender Value : 0

Gurdaspur - Punjab

Tender for gem bids for camera 5 mega pixel , ip camera 2 mega pixel 6mm , nvr 4 channel 4k full hd , smps supply , media coverter , 2u rack , cat 6 cable d link 310 mtr , pvc box , ofc joint , jointer box , patch code cable , switch 8 port , outdoor rack , hdmi cable 5 mtr , power cable 8mm 2 core , fiber cable 6 core , clutch wire for support ofc cable

State Government

TRN :34435513 | 12 May, 2025

Tender Value : 7.60 Lacs

Malda - West Bengal

Tender for replacement of under sluice gates shatter and its hoisting system, guide channel, rubber seal etc. and painting to complete the job at gahula danra u/s, malda irrigation division, block-old

State Government

TRN :34435547 | 12 May, 2025

Tender Value : 6.26 Lacs

Malda - West Bengal

Tender for replacement of under sluice gates shatter and its hoisting system draw shutter an flap shutter, guide channel, rubber seal etc. and painting to complete the job at borkal u/s, block ratua ii, mashaldighi-i, u/s block gazzole, malda irrigation d

Central Government/Public Sector

TRN :34426946 | 17 May, 2025

Tender Value : 0

Hooghly - West Bengal

Tender for gem bids for excavation in trenches in soft loose soil n exc 1.5 m wide and n. exc 1.5 m in depth for foundation etc , removing excavated materials n. exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point , material and labour for hardcore of broken stone or boulder of gauge exc 63mm but n. exc 75mm deposited spread , m and l for plain cement concrete type d2 1 4 8 using 40 mm graded stone aggregate as in foundation and mass filling , m and l for reinforced cement concrete nominal mix type b 1 1 2 4 20 mm graded stone aggregate foundations including rafts , formwork to sides of concrete foundations footings bases of columns rafts and raft beams sides and soffits if any , m and l for mild steel tmt bars 10 mm dia and over cut to length bent to shape required including cranking , m and l brick work with flyash bricks old size straight or curved on plan to any radius exc 6m mean radius build in cm 1 6 all as specified and as directed. , m and l for rendering 15 mm thick in cm 1 4 on fair faces of brick work finished even and smooth without using extra cement complete all as specified and as directed. , s and f pre painted semi fully corrugated galvalume aluminium zinc coating az 150 gi based steel sheet 0.50mm thick , m and l for framed work such as grills etc with endsof bars shouldered and or riveted or forged into spike framed guard bars , s and f pvc swr pipe fixed in walls as gutter 150 mm dia with necessary clamp complete all as specified and as directed. , plates plain or chequered channels square cut or notched ordinary and counter shank forming holes without any attachment complete all as specified and as directed. , s and f rolled mild steel in framed work fe 410w gde e 250 as in doors or gates truss purlin of angle

Central Government/Public Sector

TRN :34427025 | 15 May, 2025

Tender Value : 0

Mumbai - Maharashtra

Tender for gem bids for 14 aspiration system with integrated pump 8 channel adapter with ejector for disposable tips bottle 4 l polypropylene with closed lid compatible with aspiration system hydrophobic membrane filter non-sterile 0.45 um for aspiration system tubing 1800 mm bottle lid - hand operator

Central Government/Public Sector

TRN :34427435 | 16 May, 2025

Tender Value : 0

Leh - Ladakh

Tender for gem bids for 67 4 mp image stablizer based ir ptz 30 x camera 5 mp ir varifocal bullet network camera ik10 ip66 8mp channel nvr with 4 terabyte surveillance hdd with monitor 32 channel nvr with 32 tb surveillance hdd with monitor poe switch 8 port 150w 250 mts 12 u all weather rack 1100 va solar inverter with 12 hrs backup on each node 500 va solar inverter with 12 hrs backup on each node outdoor all weatehr cat 6 cable 300 mtr roll broad band radio links omni directional antenna power cable 2.5 sqmm 3 core 400 mtr roll display for control room desktop for cms software pole mast 20 feet 5 kva online ups installation delivery and commissioning

Government Departments

TRN :48857317 | 12 May, 2025

Tender Value : 44.00 Lacs

Jaipur - Rajasthan

Tender for repair work of 24 usq and 36 lsq quarters at pts kherwara district udaipur-- 1 part-a civil,sanitary & electrical 2 plaster on new surface on wall in cement sand mortar 1:3 including racking of joints etc. complete fine finish :12mm thick 3 grading roof for water proofing treatment with water proffing compoundcement concrete 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate 20 mm nominal size) 4 providing & laying broken glazed titles on roof ( broken glazed tiles not less than 9 kg/sqm) on top of hot bitumen @1.7 kg/sqm. (1.40 kg of vg-40 (30/40 )grade and 0.30 kg/sqm. of vg-10 (80/100) grade) and joints filled withcement mortar 1 :2 (1 cement:2 marble dust mixed with water proofing compund all complete as per direction of engineerin-charge. 5 making khurras 450 x 450mm with average minimum thickness 50mm cement concrete 1 : 2:4 over p.v.c. sheet 1 mtr. x 1 mtr. x 40micron finished with 12mm cement plaster 1 : 3 and one coat of neat cement, rounding edges andmaking and finishing the out let complete 6 providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 7 providing and fixing to existing door frames.30mm thick factory made solid panel pvc door shutter consisting of frame made out of m.s. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles and 15 mmx15mm , top & bottom rails. m.s .frame shall have a coat of steel primers of approved make and manufacture m.s. frame covered with 5mm thick heat moulded pvc „c channel of size30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on either sideforming stiles; and 5mm thick, 95mm wide pvc sheet out of which 75 mm shall be flat and 20mm shall be tapered in 45degree on the inner side to form top and bottom rail and 115mm wide pvc sheet out of which 75 mm shall be flat and20mm shall be tapered on both sides to form lock rail. top bottom and lock rails shall be provided either side of the panel.10mm (5mm x 2) thick, 20mm wide cross pvc sheet shall be provided as gap insert for top rail & bottom rail. panelling of5mm thick pvc sheet to be fitted in the m.s. frame welded/ sealed to the stiles & rails with 7mm (5mm +2mm) thick x15mm wide pvc sheet bending on inner side, and joined together with solvent cement adhesive. an additional 5mmthick pvc strip of 20mm width is to be stuck on the interior side of the „c channel using pvc solvent adhesive etc.complete as per direction of engineer-in-charge, manufacture?s specification & drawing.(for w.c.and bathroom door shutter). 8 providing and fixing external grade board solid core single leaf flush door shutters isi 2202-67 marked using phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure a :25 mm thick .decorative teak veneer both side 9 extra for providing external lipping with 2nd class teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) over item no. 8.13. 10 repair of existing steel glazed doors, windows and ventilator, mssheet door, garage doors, compound wall gates etc. by weldingdrilling complete include. cost of welding rods and hire charge ofwelding meachine and tp etc complete 11 labour charges for repair to door / window without using any material such as applying randha (finishing) tightening of bolts& screw etc. 12 renewing glass panes, with putty and nails wherever necessary 13 4 mm thick plain glass panes 14 repair of door, window shutters including cost ofmaterial and labour for change of damaged : 15 (c) aldrop of mild steel 16 (i) 12 long x12mm dia 17 (ii) 8 long x 10mm dia 18 (d) stopper of aluminium with 19 (ii) double rubber gutka 20 (g) mild steel tower bolt 6 long 21 (h) steel locking bolt 22 (i) steel handle 6 size 23 providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (is 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawlplugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer,excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required : 24 partly fixed and partly openable [ fixed area not to exceed 33%] 25 supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mmwith suitable screw at not exceeding 150mm distance. 26 providing and fixing square bars or other flat welded to window ventilatiors etc. 27 taking out doors, windows and clearstory windows shutters (steel or wood) including stacking within 50 meters lead: 28 of area 3 square meter and below 29 dismantling dry brick pitching in floors drains etc. including stacking of serviceable material and disposal ofunserviceable material within 50 mtr lead 30 dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material and disposal ofunserviceable material within 50 meter lead: 31 for thickness of tiles 10mm to 25 mm 32 dismantling stone slab/ terrazo chip flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. 33 dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbishto the dumping ground within 50 meter lead. 34 dismantling gi pipes (external work) including excavation and refilling trenches after taking out the pipes and includingstacking of pipes within 50 meter lead: 15mm to 40mm nominal bore. 35 supplying and fixing in walls machine cut and polished stone shelves, tands and in cm 1:3 with machine cut edges : 36 kota stone minimum 30mm thick. 37 kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 901 to 2000 sq.cm : 38 rajasthan black 39 (4) above 3601 cm 2 slabs 40 providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shadesglazed tiles confirming to is : 13753 & is :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of thetile complete (excluding the cost of cement plaster on walls and pillar). 41 add extra over item for marble printed, granite shade tiles 42 providing and fixing 1st quality mat finished ceremic tile size 300x300mm confirming to is : 13755 and is : 15622colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc.laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 43 plaster on new surface on wall in cement sand mortar 1:6including raking of joints etc. complete fine finish: 44 25mm thick 45 20mm thick 46 providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excludingthe cost of centering and shuttering - all work up to plinth level. 47 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stoneaggregate 40 mm nominal size) 48 providing and laying in position cement concrete includingcuring, compaction etc. complete in specified grade excludingthe cost of centering and shuttering - all work up to plinth level. 49 m15 grade nominal mix(1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). 50 providing and laying water proofing treatment in sunken portion of wcs, bathroom etc., by applying cement slurrymixed with water proofing cement compound consisting of applying :sqm. 275.00(i) first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @0.253 kg//sqm .this layerwill be allowed to air cure for 4 hours.(ii) second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm this layer will be allowed to air cure for 4 hours followed by water curing for 48 hours. the rates includes preparation of surface treatment & sealing of all joints ,corners, junction with polymer mixed slurry. 51 filling of sunk portion of roof with earthen pots of required height including filling voids with 1:3:6 light concrete, usingbrick bats complete levelling and dressing the surface by 50mm thick cement concrete 1:2:4 as per specification. 52 removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches by sandla/loi. (only for colour changing ). 53 distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: new work (two or more coats) over and includingscrapping and priming coat with cement primer. 54 painting exterior surface of wall with 100% acrylic exterior paint of approved brand and manufacture to give an evenshade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respectincluding scaffolding and safety provision 55 new work 56 painting with synthetic enamel paint of approved brand and manufacture to give an even shade 57 two or more coats on new work 58 providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast andfittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide 59 add extra of square rectangular hollow tubular section areused. 60 repair to damaged rcc slabs, beams and columns etc for strengthening with cement mortar 1 : 2 in following steps :-sqm 1568.00 (i) choping losse and cracked concrete to required depth,cleaning the exposed surface of steel and concrete with wire brush and sand papering , cleaning of concrete surface with water as necessary and getting dried.(ii) applying epoxy primer on the exposed steel bars.(iii) applying epoxy hardener and resin mix (as permanufectureds specification) on concrete and steel bars with brush.(iv) speading dry cement mortar 1 : 2 mix over epoxy treated wet surface and allow it to dry for one day.(v) plastering the surface with cement sand mortar 1 : 3 upto depth of 30mm complete.(vi) cure the plastered surface for 15 days, all work including scaffolding etc. complete in all respect. 61 p&f rigid pvc pipe (is:4985 mark) class ii/ (4 kg. /cm2 .) approved quality /make including joining the pipe withsolvent cement rubber ring and lubricant. 62 110mm dia 63 p&f rigid pvc pipe fittings (is: 4985 mark) of approved quality /make including joining the pipe with solvent cementrubber ring and lubricant: 64 coupler (socket) 65 110 mm dia 66 bend 87.5 67 110 mm dia 68 pipe clip 69 110 mm dia 70 p & f indian type white glazed vitreous china 1st quality w.c. orissa pan (is :2556 mark) with 100 mm vitreous china p or s trap including cutting and making good the wall and floor: 71 size 580 x 440 mm 72 labour charges for removing w.c. pan (any type) of all sizes with care including all necessary fittings p or s trap. 73 p & f wvc wash basin (ist quality is:2556 mark) of approved make with c.i. brackets duly painted 1 no. 15 mmc.p. pillar cock (is:8934 mark) & 32 mm c.p. brass waste coupling of approved make, p.v.c waste pipe with pvc nut32 mm complete including cutting & making good the wall : 74 size 550x400mm 75 p & f stop cock (is :8931 mark), superior quality & ofb approved make: 76 (-do-) concealed stop cock 15mm. 77 p & f pvc storage tank isi marked (is : 12701) indicating the bis license no), of approved make with cover, 25mm dia1m long g.i. over-flow pipe & 25 cm. long wash out pipe with plug & socket, including making connection etc.,complete of approved design: 78 750 litres capacity. 79 add extra for hoisting charges for each floor and tripple layered water tanks 80 for items 2.26.1 to 2.26.4 81 p & f flush cock / flush valve (is : 9758mark) for wc of approved quality make : 82 brass / gun metal half-turn wt. 1 kg. of approved quality / make, 25mm nominal bore. 83 supply & fixing g.i. union isi marked in g.i. pipe line as required complete in all respect of size : 84 15mm dia nominal bore 85 25mm dia nominal bore 86 p & f full-way valve (is:778 mark) or wheel valve ofapproved make : 87 gun-metal 15mm nominal bore. 88 (-do-) 25mm nominal bore 89 p & f gi pipes ( internal works ) with gi fittings excluding union (is:1239 mark) and ms clamps, including cuttingand making good the wall and floors. 90 (a) exposed on wall 91 15mm dia nominal bore 92 b class 93 25mm dia nominal bore 94 b class 95 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes (is 15778 : 2007 code) having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1 metre spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. (internal work exposed on wall) 96 20 mm 97 25 mm 98 providing and fixing unplasticized poly vinyl chloride (upvc) swr pipes type b for soil and waste discharge system (is:13592 : 1992 marked) of approved quality /make 99 75mm dia 100 110mm dia 101 providing and fixing unplasticized poly vinyl chloride (upvc) swr pipes fittings type b for soil and waste discharge system (is:13592 : 1992 marked) of approved quality /make. 102 coupler 103 75mm dia 104 110mm dia 105 bend 87.5 dg. 106 75mm dia 107 110mm dia 108 single tee with door 109 75mm dia 110 110mm dia 111 nahni trap with jali 4” 112 100mm dia 113 pipe clip 114 75mm dia 115 110mm dia 116 p & f bib cock (is : 8931 mark), superior quality ofapproved make: 117 c.p. brass bib cock,15mm nominal bore. 118 p & f sink cocks of superior quality & approved made : 119 c.p. sink cock swinging spout 15mm. 120 p & f square-mouth gully trap `a` grade (is :marked) of approved make complete with c.i. grating, frame & cover masonary chamber in c.m. 1:6, 100mm thick c.c. 1:5:10 base concrete, 40mm thick c.c.m-15 grade coping, 12mm thick cement plaster in cm 1:3 complete as per approved design & type. 121 trap size 150 x 100mm, 7.2 kg. c.i. cover with frame, internal chamber size 300 x 300mm. 122 construction of chamber in all type of soil with 300 mm thick masonry in cm 1:6 m 10 cm thick c.c. 1:5:10 in foundation,20mm thick insider plaster in cm 1:6, finished with floating neat cement, 50mm thick m-15 grade c.c. flooring ,earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. 123 inside size 300 x 300 mm depth upto 0.5 m cement cover with frame. 124 construction of manhole in all type of soil inner size 90 x 60 cm. 450 mm thick masonry in cm 1:6, 10 cm. thick cementconcrete 1:5 10 in foundation, 20 mm thick inside plaster in cm 1:6, finished with floating neat cement, 50mm thick m-15 grade c.c. flooring, making channels, 80mm thick stone slab covering with 40mm thick m-15 grade c.c. flooring, cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr.lead. 125 depth upto 0.50m

State Government

TRN :34418832 | 14 May, 2025

Tender Value : 0

Chandigarh Ut - Chandigarh

Tender for gem bids for 5200 lm lcd projector , 60 watt box speaker , 600 w power amplifier , handheld wireless microphone , lapel wireless microphone , tabletop unidirectional condenser microphone , 16 channel audio mixer , hdmi switcher , hdmi face plate , mic face plate with 2 mic input , 5 mp ir mfz dome camera , 4 channel nvr , hard disk 10 tb , 1.5 mtr hdmi cable , 10 mtr hdmi cable , 15 mtr hdmi cable , microphone cable , supply and drawing of utp 4 pair cat -6 lan cable , pa mixer amplifier 160 w max , pa mixer amplifier 30 w rms , pa column speaker 2 way , pa table top wired microphone , 6 u lockable networking rack , supply and laying of speaker cable , supply and laying of pvc conduit pipe 25 mm dia , 4 zone control panel , sounder , magnetic contact wire , pvc insulated copper conductor 2 x 1.5 sq.mm cable , 1st year cmc , 2nd year cmc by enhancing the amount

Central Government And Public Sector

TRN :34418927 | 02 Jun, 2025

Tender Value : 0

Palghar - Maharashtra

Tender for gem bids for end fittings (finish machined) as per taps-4/31120/2403/dd and specification pb/e/00040, r0 , end fitting flange for coolant tube rolling, drawing no. taps-4/31120/2421/dd & pb/e/00040, r0 , ef spool-a, cs ring shrink fitting mockup, drawing no. taps-4/31120/2428/dd and ts no. pb/e/00040, , ef spool-b for cs ring shrink fitting mock-ups, drawing no. taps-4/31120/2428/dd & ts no. pb/e/00040 , ef spool-c for cs ring shrink fitting mock-ups, drawing no. taps4/31120/2428/dd & ts pb/e/00040, r0 , lattice tube for 16 channel mock up as per drawing no. taps-3/31610/2507/dd and 2506/dd , lattice tube 100mm long from 241.25 mm dia end for weld qualification drg no. taps3/31610/2506&07/d , liner tube as per drawing no. taps4/31120/2402/dd and specification pb/e/00041, r0 , liner tube spacer (button) as per drawing no. taps4/31120/2402/dd and specification pb/e/00041, r0 , liner tube spool for rolling qualification as per drawing no. taps4/31120/2424/dd and specification , liner tube flange for rolling qualification-drawing no. taps-4/31120/2423/dd & ts no. pb/e/00040, r0 , journal ring, cal. side (tool steel aisi-d-2) drawing no. taps-4/31150/2401/dd & ts pb/e/00042, r0 , journal ring, fm side as per drawing no. taps-4/31150/2401/dd and specification pb/e/00042, r0 , bearing sleeve fm side for 16 ch. mock up drg no. taps4/31150/2401/dd & ts no. pb/e/00042, r0 , bearing sleeve cal. side side for 16 ch. mock up drg no. taps4/31150/2401/dd & ts no. pb/e/00042, r0 , bearing sleeve retainer ring fm side for 16 ch mock up drg no. taps4/31120/2414/dd & pb/e/00043, r0 , bearing sleeve retainer ring cal. side for 16 ch. mock up drg no. taps4/31120/2414/d & pb/e/00043r0 , ef retaining ring as per drawing no. taps-4/31120/2414/dd and specification pb/e/00043, r0 , split sleeve assy. (cs- is: 2062gra, zn plated) drg no. taps-4/31120/2413/dd & ts no. pb/e/00044, r0 , bellows attachment ring (cs-a519 gr1025) drg no. taps-4/31120/2409/dd & ts no. pb/e/00045, r0 , ss seal ring in bellows 308l/321l as per drawing no. taps-4/31120/2409/dd & ts no. pb/e/00045, r0 , yoke of position assy drg no. taps-4/31120/2407/dd and specification pb/e/00046, r0 , stud 17-4 ph m-30 x 2- 6g as per drawing no. taps-4/31120/2408/dd and specification pb/e/00047, r0 , unthreaded fixing block (part no. 2) ss-193 (yoke assembly) as per drawing no. taps-4/31120/2410/dd , unthreaded fixing block (part no. 2a) ss-193 (yoke assembly) as per drawing no. taps4/31120/2410/dd , threaded block (part no. 3) as per drawing no. taps-4/31120/2410/dd , threaded block (part no. 3a) as per drawing no. taps-4/31120/2410/dd , square head screw m-10 x 1.25-6g (850 x 4) as per drawing no. taps-4/31120/2410/dd , hex. main nut (850 x 2) as per drawing no. taps-4/31120/2410/dd , hex. lock nut as per drawing no. taps-4/31120/2410/dd , spring washer (b-10) as per drawing no. taps-4/31120/2410/dd , spring washer (b-30) as per drawing no. taps-4/31120/2410/dd , hex soc. headed cap sc. m4 x 0.7 x 8lg as per drawing no. taps4/31120/2410/dd , master gauge for dimension (l-27, c-4, l-30, b-10, c-8) as per ts no. pb/e/00040, r0 , working gauges for dimension (l-27, c-4, l-30, b-19, c-8) as ts no. pb/e/00040, r0 , landed sleeve insert (ss-410) for ct rolling as per drawing no. taps-4/31610/2414/dd , csts flanges (ss304l) for ct rolling as per drawing no. taps4/31610/2414/dd

corporations/Associations/Others

TRN :34419024 | 14 May, 2025

Tender Value : 0

Ranchi - Jharkhand

Tender for gem bids for electrical e 8 student kymograph , myograph stand , du bios reymond induction coil , simple key , short circulating key , pohl s commutator , vibrating interrupter , new nerve muscle chamber , muscle lever for the use with muscle chamber , muscle grip of femur clamp , hook and weight , heart liver , frog dissection board , enamel tray , frog board , low voltage unit for tapping , electromagnetic time marker , tuning fork, n 100 with stylus , simple electrode , x blocks , sprit lamps , marey tambour , microscope , demonstration eye pieces , double demonstration eyepiece , stage incubators , westergen pipettes for esr on stand , wintrobe pipette for esr and pvc with stand , perimeter priestley smith model , haemoglobinometer , haemocytometers with red and white pipettes , sphygmomanometer digital , stethoscopes , stethoscopes, demonstration with multiple ear pieces , polygraph , venus pressure apparatus , spirometer , gas analyser , van slykos apparatus manometric , gas analysis automatic for co2, o2,n2 , douglas bag , benedict roth recording spirometer , mosso s ergograph , clinical thermometer digital , compass aesthesiometer , thermanaesthesiometer , algometer , apparatus for passive movement comprising , knee hammer , pneumograph stethograph , bicycle ergometer , olfactometer , ophthalmoscope , schematic eye , phacoscope , perimeter , colour perception lantern edridge green , maddox rod , newton s colour disc , tuning forks to test hearing , grip dynamometer , otoscope , sterilizer electric , instruments trolley , stop watch , physiograph, 3 channels, complete with accessories , physiograph, single channel , centrifuge rectangular , digital photo colorimeter , digital ph meter , laboratory refrigerator , oxygen cylinder with trolley , co cylinder with trolley , electronic stimulator , water still , all glass distillation sets , voltage stabilizer , thermometers , balances , micro slides , glassware , digital physiograph , charts and model , ecg machine single channel

Related Sub Industries : Stainless Steel

List of channel Tenders

Tender for replacement of under sluice gates shatter and its hoisting system, guide channel, rubber seal etc. and painting to complete the job at gahula danra u/s, malda irrigation division, block-old

Tender for replacement of under sluice gates shatter and its hoisting system draw shutter an flap shutter, guide channel, rubber seal etc. and painting to complete the job at borkal u/s, block ratua ii, mashaldighi-i, u/s block gazzole, malda irrigation d

Get Channel Tender Alert...

Related Sub Industries : Stainless Steel

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us