Filters

List of lock Tenders

List of latest lock Tenders in Indian Tenders. Click on any lock Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for lock Tenders.

All-Tenders (158)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :34834615 | 04 Aug, 2025

Tender Value : 0

Jalandhar - Punjab

Tender for gem bids for sofa cusion with cover 21 inch x 22 inch x 4 inch 40 density, plywood commercial bwr teakface 8 feet x 4 feet x 6mm, plywood commercial bwr 6feet x 4feet x 12mm, leg ofcharpoy gi pipe 32mm and 408mm length duly threaded atone end, pvc seat for chair dining map, block board of size8 feet x 4 feet x 18mm thick, pvc seat and back for chairvarandah map, tape newar nylon 50mm wide, plywoodcommercial bwr one side teakface 8 feet x 4 feet x 12mm, cushion back with rexine cover for chair wrting cushion asper fd-1107, good quality tapestry cover duly stitched forsofa cushion 550x525x100mm, short rail gi 330mm x32mm for gi chorpoy both side duly threaded, seat andback for chair cb steel made of seconf class hard wood andduly canned by 2mm half round plastic cane 4mm ref drgfd-75m, plywood commercial bwr 8feet x 4 feet x 12mmthick, cushion seat with rexine cover for chair wrtingcushion as per fd-1107, cushion seat with rexine coverfor chair dining map, cusion with cover for stool dressingladies map, long rail gi 2100mm x 32mm for gi chorpoyboth side duly threaded, seat cushioned foam 21 inch x 22inch x 4 inch 40 density ref fd-1113, plywood commercialbwr 8feet x 4 feet x 19mm, plywood commercial bwr6feet x 4feet x 9mm thick, cushion back with rexine coverfor chair easy cushion suitable for fd-358, lakh dana, plywood commercial bwr 7feet x 3 feet x12mm, seat andback for chair cb made of second class hard wood dulycanned by 2mm half round plastic cane 4mm ref drg fd-75m, plywood commercial bwr 8feet x 4 feet x 9mm thick, plywood commercial bwr one side teak face 8 feet x 4 feetx 4mm, gi elbow 32 mm 3 way, shocker hydraulic spindlefor chair revolving, lock for almirah med steel, touchwood, plywood commercial bwr 8 feet x 4feet x 4mm thck, good quality tapestry cloth for sofa cushion 48 inch wide, cp handle for table bed side size 4inch, looking mirror fortable dressing gents 760x380x5mm, plywood commercialbwr of size 8feet x 4feet x 18mm thick, pvc base for chairrevolving with wheel, light siller nc sanding, handle ssfor locker steel, peg for hat stand with mirror, spiritdentured best quality, telescopic channel 12inch long, fevicol sh, french polish, caster wheel for chair revolving, telescopic channel 8inch long, plywood commercial bwr6feet x 4feet x 6mm, cloth malmal, fevicol sr, handle cpfor almirah steel 100mm, turpentine oil, cleat for almirahlarge and medium steel, telescopic channel 14 inch long, wooden handle made of second class wood for chair cbasteel, rubber bush for chair vearandah, teakwoodbeading 5mm thick 18mm wide, screw 75mm of 100 nos, pvc shoe for chair and table with screw, knob for table ordrawers, pvc arms for chair computer, nails wire 1 by 2inch head less, yellow mitti for furnitur polishing, rubbershoe for chair cba steel, bow handle aluminium 100mm, nails wire 60mm, teakwood beading 5mm thick 25mmwide, emery paper 60 grade, hacksaw blade 1 inch wide, regmar pattasofa cusion with cover 21 inch x 22 inch x 4 inch 40density, plywood commercial bwr teakface 8 feet x 4 feet x6mm, plywood commercial bwr 6feet x 4feet x 12mm, legof charpoy gi pipe 32mm and 408mm length duly threadedat one end, prelaminated board of exterrior quality 2400 x1200 mm x18mm thick, pvc seat for chair dining ref drgfd/map-ii/05, block board of size 8 feet x 4 feet x 18mm

Central Government/Public Sector

TRN :34834626 | 04 Aug, 2025

Tender Value : 6.05 Lacs

Jalandhar - Punjab

Tender for gem bids for cushion 40 density for sofa set duly stiched with bestquality tapestory cloth, plywood bwr commercial one sideteakface of size 8feet x 4feet x 12mm thick, mirror fortable dressing gents map, looking mirror for tabledressing gents ref drg fd 230, pvc sheet for chair dinningref drg fd-1105, mirror for table dressing ladies of size1200mm x 600mm x 5 mm, pvc sheet for chair school withhand board map, plywood bwr commercial 8feet x 4feet x19mm thick, plywood bwr commercial 7feet x 3feetx12mm, hand rest for chair school with hand board map, telescopic channel 14 inch long, plywood bwr commercialone side teakface of size 8feet x 4feet x 4mm thick, prelaminated particle board exterior quality 9feet x 6feet x18mm thick, plywood bwr commercial 8feet x 4feet x6mm thick, pvc seat and back for chair verandah map, lock for steel almirah large, plywood bwr commercial8feet x 4feet x 4mm thick, plywood bwr commercial oneside teakface of size 8feet x 4feet x 6 mm thick, lock foralmirah steel medium, fevicol sr, turpentine oil, cushioned sheet and back for chair writing map, copperoxidise steel pegs for hat stand, shocker hydraulic spindlefor chair revolving, pvc base for chair revolving withcaster wheel, telescopic channel 8 inch long, hessaincloth 48 inch wide, lakh dana, tape newar nylon, pvcarms for chair computer, knob for table or drawers, teakwood beading 4mm thick 18mm wide, touch wood, regmar patta of 50 ltr long, teakwood beading 4mm thick25 mm wide, french polish, telescopic channel 12 inchlong, pvc shoe with screw, chalk mitti, yellow mitti, pvcbeading 20mm wide 6 feet long, flat iron patti fpr hatstand, screw wood steel 40mm of 100 nos, light glossy, light siller, machine screw 50 mm of 100 nos, markinewhite, screw gypsum 25 mm of 100 nos, screw gypsum75 mm of 100 nos, nails 1 inch no-17 and 19, screwgypsum 60 mm of 100 nos, cloth malmal, screw gypsum50 mm of 100 nos, rubber bush for chair verandah, pvcbush for chair visitor, nails 1 point 5 inch, nails 1 point 75inch, nails 2 point 5 inch

Central Government/Public Sector

TRN :34834642 | 04 Aug, 2025

Tender Value : 1.38 Lacs

Kapurthala - Punjab

Tender for gem bids for pre laminated mdf board exterior quality of size 8feet x4feet x 18mm thick, plywood commercial bwr 6feet x3feet x 12mm thick, pre-laminated partical board exteriorquality of size 8feet x 4feet x 18mm thick, plywoodcommercial bwr 8feet x 4feet x 18mm thick, french polishreadymade, plywood commercial bwr 8feet x 4feet x4mm thick one side teak face, plywood commercial bwr8feet x 4feet x 6mm, looking mirror for table dressingladies of size 1200mm x 600mm x 5 mm, laminated sheetof size 8feet x 4feet x 1mm thick, wooden scantling65x40x2000mm, fevicol sh, plywood commercial bwr8feet x 4feet x 12mm thick, cushion for sofa of size 22inchx 21inch x 4inch, 40 densinty duly cover with tepestay clothsupparior quality, plywood commercial bwr 8feet x 4feet x4mm, cushion cover size 500x575x100mm duly stichedfrom tapestay cloth of superior qulity, gi elbow gi 3 way ofsize 32 mm, screw wood no-8 of size 65 mm pkt of 100 nos, telescopic channel 8inch long, handle for steel almirah, teakwood beading 4mm thick 18mm wide, knob for tableor drawers, nails 14 no 1 point 5 inch, screw wood no-10of size 75 mm pkt of 100 nos, telescopic channel 12 inchlong, telescopic channel 18 inch long, gypsum screw25mm pkt of 100 nos, lock for steel almirah, gypsumscrew 75mm pkt of 100 nos, lock for table office officersteel and table office clk steel, machine screw 40mm of100 nos pkt, gypsum screw 60mm of 100 nos pkt, machine screw 50mm of 100 nos pkt, screw wood no-8, 40mm of 100 nos pkt, gypsum screw 50mm of 100 nos pkt, nails 1 point five inch headless, nails 2 point 5 inch, nailshalf inch of no-17, beading wooden 4mm thick x 25mmwide, nails wire 1 inch of no-17, gypsum screw 32mm of100 nos pkt, cloth malmal white

Central Government/Public Sector

TRN :34836571 | 31 Jul, 2025

Tender Value : 0

Pune - Maharashtra

Tender for gem bids for 10602510 lv7fat6x6eelv8 556815 slide pad 10558561lv7hmv8x8alsv f9f00111 road spring assy front 10558525 lv7hmv8x8alsv f4516510 road spring assyrear 10558551 lv7hmv8x8alsv a9802700 assy ofalternator 10558538 lv7hmv8x8alsv f8a00310 steeringgear box 10558618 lv7hmv8x8alsv b0e24402 aircleaner assy 10311186 lv7itrbeml 5307 001463 50 32 2wheel bolt rhstud plain 127 long rh 10345282lv7stln vf 2815 72 0526085b 8719301 sa of fly wheel 10382424 k7 p2600742 ball valve ss 12 point 7mm 12 10339678 lv7t 815 341 413 181 000 jump start cableve 5 meter 10328085 lv7t 815 443 311 065 0 headlamp water tight in fog 891017 10337967 lv7t 815443 332 036 0 rear view mirror rhz 800 point 22402 pmirror 10347531 lv7t 815 724 006 010 1 adhesivehandplast 10346727 lv7t 815 130 076 850 614 lineto brake cylinder 10306513 lv7 sca 169136 cap 10303536 lv7 sca 4720015366 225586 hose rubber 10302672 lv7 sca 2920 72 047 1629 control box relay1117253 10306176 lv7 sca 233532 seal ring 10302088 lv7 sca 261797 glass 10307561 lv7 sca385840 repair kit 10300733 lv7 sca 252235 switch 10304201 lv7 sca 931106 cover oil filter 10306005lv7 sca 587172 adjusting tool 10304748 lv7 sca1305712 seal ring 10305608 lv7 sca 222499 gasket 10305872 lv7 sca 389468 switch hazard warn light 10302190 lv7 sca 263667 repair kit 10302731 lv7 sca283136 hose 10303522 lv7 sca 550718 repair kit 10306118 lv7 sca 587443 spare kit 10306770 lv7 sca187720 window regulator rh 10302682 lv7 sca587159 spanner 10305667 lv7 sca 387247 gasket 10302673 lv7 sca 587155 fixture 10302045 lv7 sca33021 ball bearing 10307432 lv7 sca 562248 gasket bid number gem2025b6432636 dated 10-07-2025 bid document1 140 1 1 set, 10302705 lv7 sca 587167 sleeve, 10302267 lv7sca 587168 meas tool, 10305144 lv7 sca 291826gasket, 10300926 lv7 sca 417223 stator, 10306020lv7 sca 587173 meas clamp, 10301809 lv7 sca 249914brake valve, 10306024 lv7 sca 587179 clean kit, 10305064 lv7 sca 2940004962 275113 air cleaner assy, 10303347 lv7 sca 391331 injection pump, 10565184w18hmv8x8al 021 l004 01 condenser fan assy 24v, 10558638 w18hmv8x8al p6n00089 pcb dl 93 24v dc, 10565185 w18hmv8x8al 999 0001 00 evaporator assy, 10558639 w18hmv8x8al pc900008 water pump heatingw bkt clamp, 10306254 lv7 sca 79004 dial indicator, 10301527 lv7 sca 219953 direct indicator light, 10302080 lv7 sca 261792 glass, 10302877 lv7 sca98356 press drift, 10302304 lv7 sca 1111298 259813hose, 10323999 lv7stln x 7482600 turbocharger122kw alfa 353deg, 10558480 lv7hmv8x8alsvfk901900 turbo charger, 10345668 lv7stln 2520012466 x 3970200 shaft propeller, 10558707lv7hmv8x8alsv f8p05500 emergency steering pump, 10558514 lv7hmv8x8alsv x7489400 water separator, 10343374 lv7stln 2910 008290 pump fuel meteringdistributing, 10602539 lv7fat6x6eelv8 558044 hphose, 10602536 lv7fat6x6eelv8 488200 hp hose, 10602529 lv7fat6x6eelv8 488197 hp hose, 10602520lv7fat6x6eelv8 487309 hp hose, 10602525lv7fat6x6eelv8 191213 return filter, 10558500lv7hmv8x8alsv 5001006570 alt pt no p7809639 clutchbooster assy, 10558483 lv7hmv8x8alsv x7700100 aircompressor, 10573931 lv7hmv6x6mbrll t b9801004 airoil separator, 10583978 lv7hmv6x6mbrll t f3v00100load sensing valve b5a05505, 10318994 lv7itrbeml4720 000415 hose assy rubber 900 long lot 2 to 4, 10332276 lv7stln b3124901 road spring front assy, 10347337 lv7stln 2950 72 0471175 assyturbocharger, 10583968 lv7hmv6x6mbrll tx7495400 alternator, 10386691 k7 5330 013506 sealmechnical carbon complete, 10377559 k7 4210000062 machine hose binding, 10382568 k7 p 2601842butterfly valve 100 mm 4, 10385352 k7 9302102valve ball 80mm, 10382544 k7 p 2600542 butterflyvalve 125 mm, 10322613 lv7t 815 993 050 549 0 twopart piston, 10343314 lv7t 815 443 999 251 000 sbrake shoe set, 10325469 lv7stln vf b 8774801 sa ofoil cooler, 10336896 lv7t 815 443 400 432 000 cable2159 80 01 0750, 10331706 lv7t 815 443 414 016 000volt meter vdo 332 040 001g, 10325143 lv7t 815 993200 350 0 ring, 10319547 lv7t 815 141 046 140 329specer insert 15 point 00 21, 10318064 lv7t 815 993050 129 0 gasket cover plate, 10340226 lv7t 815 534907 070 6 prz 0617 bending lever for piston, 10334155 lv7t 815 442 070 211 134 suction tube, 10331804 lv7t 815 442 070 400 484 fan, 10330271 lv7t815 443 612 198 0 trailer control valve, 10343355lv7t 815 443 930 151 110 coil system 2 3, 10331144lv7t 815 443 614 002 800 compressor 4102, 10319827lv7t 815 990 100 939 0 nut pressure cw sleeve, 10315262 lv7t 815 202 221 013 4 steering lockholder, 10358316 lv7t 815 201 152 057 4 camshaft, 10319939 lv7t 815 990 700 635 0 complete repair set, 10314191 lv7t 815 207 088 003 4 injection cylinder va51 p 490 2987, 10342192 lv7t 815 prm 315 241 547 505930 6 remover of bearing rnu212b from half axl, 10330268 lv7t 815 443 612 193 017 brake cylinder, //bid details2 / 140 lv7t 815 547 606 830 6 prm 3425 supportfor disassy of gear, 10316917 lv7t 815 993 050 346 0module elect control, 10335621 lv7t 815 558 106190 6 mru 0149 basic tool to measure coax, 10339719 lv7t 815 443 700 005 0 exchanger modine1520055 point 15, 10322839 lv7t 815 4x4 442 073 560374 handle assy for spare wheel, 10312609 lv7t 8154x4 442 074 860 374 spring cylinder wabco 4254289500, 10526024 lv7t 815 hmv 547 506 560 6 prl 0655dvr of shaft seal 30x55x10 9, 10520670 lv7t 815 hmv573 910 720 6 prl 0653 dvr of brg 442 050 400 314 of, 10337796 lv7t 816 993 050 009 0 alternator, 10313613 lv7t 816 993 050 347 0 injector, 10301245lv7 sca 355480 hub vibration damper, 10306078 lv7sca 587299 sleeve socket spanner, 10302651 lv7 sca587151 clamp, 10303278 lv7 sca 1350232 vavle, 10305999 lv7 sca 313696 magnetic armature, 10306514 lv7 sca 215720 double check valve, 10301520 lv7 sca 219761 elbow connetor, 10301400lv7 sca 258267 ball bearing outer, 10302702 lv7 sca587162 puller, 10307488 lv7 sca 373397 trailercoupling set, 10303211 lv7 sca 98453 protectivesleeve for seal, 10307099 lv7 sca 211779 lowpressure indicator, 10302911 lv7 sca 98359assembly tool for hub, 10301765 lv7 sca 249109fuel gauge, 10307200 lv7 sca 99080 adoptor, 10303310 lv7 sca 285085 door window, 10302928 lv7sca 280676 cyl head with valve seat, 10304194 lv7sca 242856 fuel guage, 10306656 lv7 sca 217385relay valve, 10302686 lv7 sca 587161 puller, 10301250 lv7 sca 258986 pressure limiting valve, 10306144 lv7 sca 587448 puller, 10301290 lv7 sca362666 drive end frame, 10306633 lv7 sca 173554relay, 10306813 lv7 sca 216969 shock absorber, 10303497 lv7 sca 550167 repair kit water pump shaft, 10304480 lv7 sca 275584 container, 10307380 lv7sca 99052 socket, 10306919 lv7 sca 1374083 repairkit, 10303231 lv7 sca 1341589 rotor, 10302387 lv7sca 550132 repair kit, 10302774 lv7 sca 284154sensor, 10304105 lv7 sca 242513 radiator, 10303038 lv7 sca 301484 magnetic valve, 10307496lv7 sca 374338 oil pressure sensor, 10302637 lv7sca 587150 key, 10302936 lv7 sca 391301 steeringcolumn lower, 10304421 lv7 sca 253709 exhaustpiping, 10305284 lv7 sca 293990 steering, 10305135lv7 sca 268353 comb instrument, 10306506 lv7 sca215621 relay valve with double check valve, 10307408 lv7 sca 99372 puller, 10307343 lv7 sca139625 ring gear, 10306694 lv7 sca 214561 r0llerbearing, 10304065 lv7 sca 241797 brake valve, 10303258 lv7 sca 1348919 compressor, 10303515 lv7sca 550195 repair kit turbocharger inner, 10304763lv7 sca 265496 air cylinder, 10305919 lv7 sca1497772 238808 ball joint, 10302677 lv7 sca 587157eye key, 10301284 lv7 sca 259310 hydraulic oil pump, 10303894 lv7 sca 257226 muffler, 10301266 lv7 sca361453 hudraulic pump, 10302655 lv7 sca 587153puller, 10306538 lv7 sca 216541 brake cam shaft, 10302281 lv7 sca 587169 meas tool, 10306565 lv7sca 169904 propeller shaft, 10300960 lv7 sca197811 battery main switch, 10306148 lv7 sca587449 clock, 10302581 lv7 sca 264768 universaljoint, 10305579 lv7 sca 298361 front fender v, 10302862 lv7 sca 98113 hose kit or nipple, 10519171 //bid details3 / 140 lv7 sca 99126 electrical test equipment, 10301247lv7 sca 258985 air dryer, 10302356 lv7 sca 277183rear spring 11 leaves, 10565187 lv8hmv8x8al 9867635 h p hose rd 16 5 8 lg 2240, 10565186w18hmv8x8al 021 l002 01 blower assy 24v, 10565180w18hmv8x8al 014 l003 02 compressor assy tm21, 10558550 lv7hmv8x8alsv x7495300 starter motor, 10565197 w18hmv8x8al 010 0016 00 thermostat, 10602527 lv7fat6x6eelv8 512508 packing setpacking setextn cyl, 10602540 lv7fat6x6eelv8 482390 packing setinner boom, 10331041 lv7t 815 130 020 880 254bearing bush, 10303564 lv7 sca 551421 gasket kitoil cleaner, 10305285 lv7 sca 562516 hp hose1250mm, 10333737 lv7t 815 413 311 011 122 twoended spanner 11x12 csn 230610 point 2, 10312922lv7t 815 993 050 097 0 plunger, 10305738 lv7 sca257829 hose, 10306795 lv7 sca 216605 lock washer, 10326044 lv7t 815 4x4 443 113 632 000 wheel discnut m22 x 1 point 5 din 74361 10, 10306622 lv7 sca173171 filter, 10302758 lv7 sca 98111 manometer orpressure gauge, 10302659 lv7 sca 587154 assemblytool10602510 lv7/fat6x6/ee/lv8 556815 slide pad, 10558561 lv7/hmv/8x8/al/sv f9f00111 road spring assyfront, 10558525 lv7/hmv/8x8/al/sv f4516510 road springassy rear, 10558551 lv7/hmv/8x8/al/sv a9802700 assyof alternator, 10558538 lv7/hmv/8x8/al/sv f8a00310steering gear box, 10558618 lv7/hmv/8x8/al/svb0e24402 air cleaner assy, 10311186 lv7/itr/beml 5307-001463 / 50-32-2 wheel bolt rh/stud plain 127 longrh, 10345282 lv7/stlnvf 2815-72-0526085/b-8719301s/a of fly wheel, 10382424 k7 p2600742 ball valve ss12.7mm 1/2 , 10339678 lv7/t-815 341-413-181-000 jumpstart cable-ve 5 meter, 10328085 lv7/t-815 443-311-065-0 head lamp water tight in fog 891017, 10337967lv7/t-815 443-332-036-0 rear view mirror rhz800.22402 p mirror, 10347531 lv7/t-815 724-006-010-1adhesive handplast, 10346727 lv7/t-815 130-076-850-614 line to brake cylinder, 10306513 lv7-sca 169136cap, 10303536 lv7-sca 4720015366225586 hoserubber, 10302672 lv7-sca 2920-72-047-1629 controlbox relay 1117253, 10306176 lv7-sca 233532 sealring, 10302088 lv7-sca 261797 glass, 10307561 lv7-sca 385840 repair kit, 10300733 lv7-sca 252235switch, 10304201 lv7-sca 931106 cover oil filter, 10306005 lv7-sca 587172 adjusting tool, 10304748lv7-sca 1305712 seal ring, 10305608 lv7-sca 222499gasket, 10305872 lv7-sca 389468 switch hazardwarn light, 10302190 lv7-sca 263667 repair kit, 10302731 lv7-sca 283136 hose, 10303522 lv7-sca550718 repair kit, 10306118 lv7-sca 587443 spare kit, 10306770 lv7-sca 187720 window regulator rh, 10302682 lv7-sca 587159 spanner, 10305667 lv7-sca387247 gasket, 10302673 lv7-sca 587155 fixture, 10302045 lv7-sca 33021 ball bearing, 10307432 lv7-sca 562248 gasket set, 10302705 lv7-sca 587167sleeve, 10302267 lv7-sca 587168 meas tool, 10305144lv7-sca 291826 gasket, 10300926 lv7-sca 417223stator, 10306020 lv7-sca 587173 meas clamp, 10301809 lv7-sca 249914 brake valve, 10306024 lv7-sca 587179 clean kit, 10305064 lv7-sca2940004962275113 air cleaner assy, 10303347 lv7-sca 391331 injection pump, 10565184 w18/hmv/8x8/al021-l004-01 condenser fan assy 24v, 10558638w18/hmv/8x8/al p6n00089 pcb-dl-93 24v dc, 10565185w18/hmv/8x8/al 999-0001-00 evaporator assy, 10558639

Central Government And Public Sector

TRN :34837287 | 06 Aug, 2025

Tender Value : 0

Kota - Rajasthan

Tender for gem bids for disc mcd 4 cl 150 gr lcb col 4 for 4 150 gate lcb bwmanual 4300 gtv stem 630 h1075 for 4 150 gate lcbbw manual gasket tp 316 graphie 4 300 gtswgvmu for4 150 gate lcb bw manual stud gr l43 5 8 11unc 2a x100l for 4 150 gate lcb bw manual hex nut gr 7 5 8 11for 4 150 gate lcb bw manual bonnet bush tp 316l 1col 4 for 4 150 gate lcb bw manual packing braided jdjones na b3 1 for 4 150 gate lcb bw manual packinggraphite na 707 die moulded1 for 4 150 gate lcb bwmanual studft gr l43 1 2 13unc 2a x 120l for 4 150gate lcb bw manual hex nut gr 7 1 2 13 unc for 4 150gate lcb bw manual yoke sleeve mcg for 4 150 gatelcb bw manual retainer nut 1 cs for 4 150 gate lcbbw manual handwheel 250 sg 400 15 for 4 150 gatelcb bw manual disc mcd gr lcb 6 300 gate for 6 150gate lcb bw manual stem mcd 6 cl 300 tp 630 for 6 150gate lcb bw manual gasket tp 316 graphite swg for 6150 gate lcb bw manual studft mcd gr l43 3 4 10unc 120 for 6 150 gate lcb bw manual hex nut gr 7 34 10unc 6 150 gate lcb bw manual bonnet bush tp316l 1 1 4 cy4 for 6 150 gate lcb bw manual packingbraided jd jones na b31 1 4 for 6 150 gate lcb bw manual packing graphite na 707 die mould1 1 4 for 6 150gate lcb bw manual studft gr l43 5 8 11 unc 140 for 6150 gate lcb bw manual hex nut gr 7 5 8 11 unc for 6150 gate lcb bw manual yoke sleeve mcg b148 for 6150 gate lcb bw manual retainer nutcs for 6 150gate lcb bw manual handwheel dia 350 sg40015 for 6150 gate lcb bw manual disc mcg 16 300 gtlcbcol 4for 16 150 gate lcb bw manual stem mcg1 7 8 16 300gt630 h1075 for 16 150 gate lcb bw manual gasket tp316 graphite 16300 150 cmg for 16 150 gate lcb bwmanual studft gr l43 1 1 8 x 5 1 2 for 16 150 gate lcb bid number gem2025b6269443 dated 15-07-2025 bid document1 143 bw manual hex nut gr 7 1 1 8 8un for 16 150 gate lcbbw manual bonnet bush 1 7 8 t316lcol 4 for 16 150gate lcb bw manual packing braided jd jones na b31 78 for 16 150 gate lcb bw manual packing graphite na707 die mould1 7 8 for 16 150 gate lcb bw manual studft 3 410unc2a 190ll43 for 16 150 gate lcb bwmanual hex nut gr 7 3 4 10 unc for 16 150 gate lcbbw manual lantern ring pipe plug 3 8 nptt ss316 for16 150 gate lcb bw manual disc mcg 14 300 gtlcbcol4 for 14 300 gate lcb bw manual stem mcg1 3 4 14 300gt630h1075 for 14 300 gate lcb bw manual gasket tp316 graphi 14133vmuswg for 14 300 gate lcb bw manual studft gr l43 1 x 5 14 300 gate lcb bw manual hexnut gr 7 1 8 unc for 14 300 gate lcb bw manual bonnetbush 1 3 4 t316lcol 4 for 14 300 gate lcb bw manual packing braided jd jones na b31 3 4 for 14 300 gate lcbbw manual packing graphite na 707 die mould1 3 4for 14 300 gate lcb bw manual lantern ring plug 3 8nptss 316 for 14 300 gate lcb bw manual studft 3410unc2a 190ll43 for 14 300 gate lcb bw manual hexnut gr 7 3 4 10 unc for 14 300 gate lcb bw manual disc for 3 150 300 cf3m cy4 for 3 150 gate cf3m bwmanual stem mcg 3 cl300 gtls 630h1075 for 3 150gate cf3m bw manual gasket tp 316 graphie 3 300gtswgvmu for 3 150 gate cf3m bw manual stud 5 811unc 2a x 90ll43 for 3 150 gate cf3m bw manual hexnut gr 7 5 8 11 unc for 3 150 gate cf3m bw manual bonnet bush tp 316l 1 col 4 for 3 150 gate cf3m bwmanual packing graphite braided 7 8 for 3 150 gatecf3m bw manual packing graphite na 707 die mould 78 for 3 150 gate cf3m bw manual studft gr l43 1 213unc 2a x 120l for 3 150 gate cf3m bw manual hexnut gr 7 1 2 13 unc for 3 150 gate cf3m bw manual yoke sleeve machining for 3 150 gate cf3m bw manual retainer nut 7 8 cs for 3 150 gate cf3m bw manual handwheel 250 sg 400 15 for 3 150 gate cf3m bwmanual gate machining 4 150 300 for 4 150 gate cf3mbw manual 4300 gtv stem316 for 4 150 gate cf3m bwmanual gasket tp 316 graphie 4 300 gtswgvmu for 4150 gate cf3m bw manual studft gr l43 5 8 x 3 7 8 for4 150 gate cf3m bw manual hex nut gr 7 5 8 11 uncfor 4 150 gate cf3m bw manual bonnet bush 7 8 t316lcol 4 for 4 150 gate cf3m bw manual packing braidedjd jones na b3 1 for 4 150 gate cf3m bw manual packing graphite na 707 die moulded1 for 4 150 gatecf3m bw manual studft gr l43 1 2 x 4 5 8 for 4 150gate cf3m bw manual hex nut gr 7 1 2 13 unc for 4150 gate cf3m bw manual yoke sleeve mcg for 4 150gate cf3m bw manual retainer nut 1 cs for 4 150gate cf3m bw manual handwheel 250 sg 400 15 for 4150 gate cf3m bw manual disc mcd 2 cl 150 gr f316lhf for 2 in 150 swing check valve cf3m hinge mcd grcf3m 2 513 533 a rot for 2 in 150 swing check valve cf3m disc washer mcd tp 316 2 2 1 2 513 for 2 in 150 swingcheck valve cf3m hex nut tp 316 1 2 13 unc ns for 2 in150 swing check valve cf3m disc nut pin tp 316 splittp 3 2 x 50 for 2 in 150 swing check valve cf3m bracketmcd gr cf3m 2 513 533 for 2 in 150 swing check valvecf3m hex head screw tp 316 m6 x 25 is 1364 for 2 in150 swing check valve cf3m hinge pin 2 cl 150 tp 630 2in 150 swing check valve cf3m gasket tp 316316lgraph 2513 533 swg for 2 in 150 swing check valvecf3m 4 150 300 disc mcg cf3m cy4 for 4 300 checkcf3m bw 4 hinge mcg cf3m for 4 300 check cf3m bw bid details2 143 1 1 washer 316 for 4 300 check cf3m bw, hex nut tp 3161 2 13 unc for 4 300 check cf3m bw, split pin 316 for 4300 check cf3m bw, hinge pin 4 cl 150 630 h1075 for 4300 check cf3m bw, gasket tp 316 grapvmu4533 for 4300 check cf3m bw, disc mcd 4 cl 150 gr lcb col 4 for4 150 gate lcb bw mov, 4300 gtv stem 630 h1075 for 4150 gate lcb bw mov, 4300 gtv bonnet machining lr for4 150 gate lcb bw mov, gasket tp 316 graphie 4 300gtswgvmu for 4 150 gate lcb bw mov, bonnet bush316l cy4 for 4 150 gate lcb bw mov, packing braidedjd jones na b3 1 for 4 150 gate lcb bw mov, packinggraphite na 707 die moulded1 for 4 150 gate lcb bwmov, studft gr l43 1 2 13unc 2a x 120l for 4 150 gatelcb bw mov, hex nut gr 7 1 2 13 unc for 4 150 gatelcb bw mov, lock nut 1 213unc2bgr 7 for 4 150 gatelcb bw mov, disc mcg 16 300 gtlcbcol 4 for 16 150gate lcb bw mov, stem mcd 1 7 8 16 300s2630 h1075for 16 150 gate lcb bw mov, gasket tp 316 graphite16300 150 cmg for 16 150 gate lcb bw mov, bonnetbush 1 7 8t316 for 16 150 gate lcb bw mov, packingbraided jd jones na b31 7 8 for 16 150 gate lcb bw mov, packing graphite na 707 die mould1 7 8 for 16 150gate lcb bw mov, studft 3 410unc2a 190ll43 for 16150 gate lcb bw mov, hex nut gr 7 3 4 10 unc for 16150 gate lcb bw mov, disc mcg 14 300 gtlcbcol 4 for14 300 gate lcb bw mov, stem 14 cl 300 1 3 4s2tp630h1075 for 14 300 gate lcb bw mov, gasket tp 316graphi 14133vmuswg for 14 300 gate lcb bw mov, bonnet bush 1 3 4 t316lcol 4 for 14 300 gate lcb bwmov, packing braided jd jones na b31 3 4 for 14 300gate lcb bw mov, packing graphite na 707 diemould1 3 4 for 14 300 gate lcb bw mov, studft 3410unc2a 190ll43 for 14 300 gate lcb bw mov, hexnut gr 7 3 4 10unc for 14 300 gate lcb bw mov, discmcd 4 cl 600 gr lcb col 4 for 4 600 gate lcb bw mov, gasket tp 316 graphite 4 163 vmu for 4 600 gate lcbbw mov, stem 4 cl 600 tp 630 1 1 8 for 4 600 gate lcbbw mov, bonnet bush 4 cl 600 tp 316l 1 1 8 for 4 600gate lcb bw mov, pkgsplit ring 1 5 8 graphite for 4600 gate lcb bw mov, packing graphite 1 1 8gr for 4600 gate lcb bw mov, studft gr l43 5 8 11unc 125lfor 4 600 gate lcb bw mov, hex nut gr 7 5 811 unc2bfor 4 600 gate lcb bw mov, disc mcd 8 cl 600 gr lcbcol4 for 8 600 gate lcb bw mov, stem mcd 8 cl 600 tp630 1 5 8 for 8 600 gate lcb bw mov, gasket tp 316 8600 gt spiral wound gr for 8 600 gate lcb bw mov, bonnet bush tp 316l 1 5 8col4 for 8 600 gate lcb bwmov, packing braided jd jones na b31 5 8 for 8 600 gatelcb bw mov, packing graphite na 707 die mould1 5 8for 8 600 gate lcb bw mov, studft 3 410unc2a190ll43 for 8 600 gate lcb bw mov, hex nut gr 7 3 410unc2bgr 7 for 8 600 gate lcb bw mov, lock nut 3410unc2bgr 7 for 8 600 gate lcb bw mov, disc mcg 14600 gtlcbcol 4 for 14 600 gate lcb bw mov, stem mcg2 1 4 14 600 gt630h1075s2 for 14 600 gate lcb bw mov, gasket 14 600 gt ss316gr for 14 600 gate lcb bwmov, bonnet bush 2 1 4t316lcol 4 for 14 600 gate lcbbw mov, packing braided jd jones na b32 1 4 for 14 600gate lcb bw mov, packing graphite na 707 diemould2 1 4 for 14 600 gate lcb bw mov, studft gr l431 x 8 1 4 for 14 600 gate lcb bw mov, hex nut gr 7 18unc for 14 600 gate lcb bw mov, disc 2 150 300 cf3mcy4 for 2 150 gate cf3m flg pn act, gasket tp316grapsg18 20533 cmg for 2 150 gate cf3m flg pn act //bid details3 / 143, stem mcg 2 cl150 gt 630h1075 for 2 150 gate cf3mflg pn act, 3 4 bonnet bush 316l for 2 150 gate cf3mflg pn act, stud gr b7 1 2 x 2 for 2 150 gate cf3m flgpn act, hex nut gr 2h 1 2 13 unc for 2 150 gate cf3mflg pn act, packing graphite braided na b33 4 for 2 150gate cf3m flg pn act, packing graphite diemouldedna 7073 4 for 2 150 gate cf3m flg pn act, disc 3 150300 cf3m cy4 for 3 150 gate cf3m bw pn act, gasket tp316graphie 3 300 gtswgvmu for 3 150 gate cf3m bw pnact, stem mcg 3 cl300 gt 630h1075 for 3 150 gatecf3m bw pn act, packing graphite braided 7 8 for 3150 gate cf3m bw pn act, packing graphite na 707 diemould 7 8 1 set 2 nos for 3 150 gate cf3m bw, lanternring for 3 150 gate cf3m bw pn act rapp7 8 33003 2109vss drg 33003 2597, studft 1 213unc2a x 120lgr l43nizn for 3 150 gate cf3m bw pn act, hex nut gr 7 1 213 unc s3impact for 3 150 gate cf3m bw pn act, discmcd 4 cl 150 gr lcb col 4 for 4 150 gate lcb bw pn act, gasket tp 316graphie 4 300 gtswgvmu for 4 150 gatelcb bw pn act, stem mcg 4 cl300 gt 630h1075 for 4 150gate lcb bw pn act, packing braided jd jones na b3 1 for4 150 gate lcb bw pn act, packing graphite na 707 diemoulded1 4 150 gate lcb bw pn act, lantern ring for 4150 gate lcb bw pn act, studft gr l43 1 2 x 4 1 2 for 4150 gate lcb bw pn act, hex nut gr 7 1 2 13 uncs3impact for 4 150 gate lcb bw pn act, fs bonnet gt50fp bb 125r f316l ut pt ig for 2 150 gate bw, fs stemgt 50 fp a564 gr 630 h1075 hw for 2 150 gate bw, fsdisc gt 50 fp cf3mcolm trim g3 for 2 150 gate bw, fsyoke sleeve gt 50 fpt 416 for 2 150 gate bw, fs gasketgt 50 fp 304gra for 2 150 gate bw, fs packing gl 50 nab3 1 set 2 nos for 2 150 gate bw, fs packing 50glgraphite ring for 2 150 gate bw, fs hand wheel gt 50fp sg iron 8 for 2 150 gate bw, fs bonnet gt 15fp bb125r f316l pt igce for 0 5 900 gate bw, fs stem gt 0810 15 20 a564h1075 hw for 0 5 900 gate bw, fs disc gt20 cf3mcolm trim g3 for 0 5 900 gate bw, fs yokesleeve 15gt 20gt 416 for 0 5 900 gate bw, fs gasketgl gt ch 20 304gra for 0 5 900 gate bw, fs packing15gt 20gt 15gl graphite ring for 0 5 900 gate bw, fspacking gt 15 20gt 15gl na b3 for 0 5 900 gate bw, fshand wheel 15mm gt 20gt a105 for 0 5 900 gate bw, fs bonnet gt 25fp bb 125r f316l pt igce for 1 900 gatebw, fs stem gt 32 40 a564 gr 630 h1075 hw for 1 900gate bw, fs disc gt 32 40 cf3mcolm trim g3 for 1 900gate bw, fs yoke sleeve gt 32gt 40gt 416 for 1 900gate bw, fs gasket gt 40 304gra for 1 900 gate bw, fspacking 40mm gt for 1 900 gate bw, fs packing 40mmgt na b3 for 1 900 gate bw, fs hand wheel 40mm gtsg iron for 1 900 gate bw, cover mcd gr 316l 25mmball ch fp for 1 150 ball check, spring dn 25 cl 150ball check for 1 150 ball check, fs disc ch 25 fp balltype 316l for 1 150 ball check, fs gasket gl 40 40ch304gra for 1 150 ball check, fs hex cap screw 1 2 gtgl 40 b7 niz for 1 150 ball check, dn20 cl1500 bclcvdisc 316l cy4 for dn20 1500 check f316l bw, dn20cl1500 bclcv cover f316l for dn20 1500 check f316lbw, 10 15 20 1500 2500 spring inconel 750 for dn20 1500check f316l bw, fs gasket ch ch dn20 cl 1500 bclcvfor dn20 1500 check f316l bw, hex cap screw m16 x50lgr l43nizn for dn20 1500 check f316l bw, fs discch dn25 cl1500 316l cy4 for dn25 1500 check f316l bw

Central Government/Public Sector

TRN :34838142 | 28 Aug, 2025

Tender Value : 0

Adra - West Bengal

Tender for supply of locking bar assembly.

Central Government/Public Sector

TRN :34839202 | 08 Aug, 2025

Tender Value : 0

Vadodara - Gujarat

Tender for supply of automatic twist locks for blc wagon.

Central Government/Public Sector

TRN :34841431 | 03 Sep, 2025

Tender Value : 0

Kanpur - Uttar Pradesh

Tender for supply of 500a, 750v zs coupling socket with locking arrangement but without cable.

State Government

TRN :34843071 | 29 Jul, 2025

Tender Value : 0

Amravati - Maharashtra

Tender for gem bids for "prelam 2shutter wardrobe 900lx600dx1800ht without mirrorproviding and fixing wardrobe without mirror of size 900lx600dx1800h the wardrobe side panels and doors are made up of 18mm thick prelam partiole board with both side decorative laminate all exposed edges are sealed with rmm thick pvc edge banding the shelves are made of 18mm thick prelam particle board with decorative laminate on both sides the top is made of 36 mm prelam particle board with decorative laminateon both sides 18mm pralam partiole board and 18mm batons on all sides to achieve 36mm overall thickness the exposed edges of the top are sealed with 2mm thick pvc edge banding the top most part of the wardrobe has an aluminum hanger rod of bbco make one drawer of size 400wx150hx450d made of 18mm thick prelam particle board has been considered ; " "prelam 2 shutter wardrobe 750lx600dx1200ht without mirrorlow height top 18mm thick prelaminated partical board with rmm pvc edge band on all edges carcass (body shutter back 18mm thick prelaminated partical board with pvc edge band on all exposed edges shelf four adjustable and one fixed shelf made of prelaminated partical board with pvc edge band on all edges shutters lockable swing shutters with c handle hardware hettich hinges ; " prelam storage 1050lx450dx750ht supply fitting & fixing of sos make prelam stormge storage top shall be made of 25mm thick prelam (osl particle board for low height prelam storage up to 750 height and above 750mm height 6mm thick prolam (osi particle board is used both the 25mm and 18mm thick prelam (osl particle board confirmning to is 12823 1990 with rmm thick pvc lipping glued with kliberit 779 6 glue storage top is under goes from distributed load test for deflection by applying 0 027kg mm lond on top and concentric load test by applying 90kg load on weaker section load carrying capacity of 18mm thick shelf shall be 25kgs udl storage body ; "high back chair adjustable seat height armrest looking mechanism seat lock swivel wheels head support wxh 630mx1140m frame material sold wood upholstery type cushion diy ;" "sofa ease 2seater leatherette finish ss legs 1500x750dx880h for ground floor vip suit living area specifications frame the sofas frame is made from solid sustainable wood and commercial ply upholstery fabric leatherette upholstered back and sea base frame 40x22x16mm thk ss pipe base frame finish ss mirror finish modules 1seater 3seater ;" sofa ease 3seater leatherette finish sslegs900lx750dx880h for ground floor vip suit living area specifications frame the sofas frame is made from solid sustainable wood and commercial ply upholstery fabric leatherette upholstered back and seat base frame40x22x16mm thk sspipe base frame finish ssmirror finish modules 1seater3seat the construction shall be aesthetically appealing completely knook down construction fitting is done by using the minifix dowels gable end height will be 725mm and its depth varies as per the depth of work top standard depth of work top will be soo mm and 750mm ; piss center table 1200wx600dx350h for vip tea table table top to be made of 12mm thick plain toughned glass uderstructure to be made of ss finish ; public seating in configuration 3seating metal perforated benches levellers they are made of injection moulded nylon 6and is used for level adjustment for any unevenness on the floor they are fitted to the leg assembly leg assembly it is a powder coated legs to support the firm seating structure above and are made of ms they have threaded nuts welded to fit section for fixing levelers to the leg armrest it is made of oblong tube and is joined to the frame section at the ends to provide the sturdiness to the structure these armrests are strong to provide the needed comfort when leaning on seat ; providing fixing cotton curtain with rod and stiching three fold table top is under goes from distributed load test for deflection by applying 0027 kg mm lond ontop and concentrio lond tost by applying rokg load on weaker section understructure gable end is made up of romm thick dual color edge in sandwich of 25 the prelam partiale board and mm the bsl prelam particle board confirming ti s 128231990 in alate grey with 2 mm 045 mm thick pvc lipping glued with kliberit 7796 glue ; prelam free standing table1800lx200dx750ht with rb rf pedestal4000x450dx670ht supply fitting & fixing of sos make prolam cabin work top shall be made up of work top shall be made 25mm thick prelam osl particle board confirming to is128231990withmm thick pvc lipping glued with kliberit7796glue work top is under goes from distributed load test for deflection by applying 0027kg mm lod on top and concentric load test by applying rokg load on weaker section understructure modesty panel shall be made of 18 mmthick prelam bsl particle board confirming to is 128231990 with 2mm thick pvc lipping glued with kliberit7796 glue gable ends shall be made of 25mm thiok prelambsl particle board confirming tois128231990 "prelam free standing table 1800l200d750ht with rb rf pedestal 4000450d670ht supply fitting fixing of sos make prolam cabin work top shall be made up of work top shall be made 25mm thick prelam osl particle board confirming to is 12823 1990 with mm thick pvc lipping glued with kliberit 7796 glue work top is under goes from distributed load test for deflection by applying 0027kg mm lod on top and concentric load test by applying rokg load on weaker section understructure modesty panel shall be made of 18mm thick prelam bsl particle board confirming to is 12823 1990 with 2mm thick pvc lipping glued with kliberit 7796 glue gable ends shall be made of mm thiok prelam bsl particle board confirming to is 128231990 ; " "60linear sharing and non sharing workstation1350lx500x12000ht with cmm glass separator (frosted panel 600lx450h and key bord traysupply fitting & fixing of sos make sl60modular workstation work top work top shall be made 25mm thick prelam osl particle board confirming to is 128231990with2mm thick pvc lipping glued with kliberit 7796glue table top is under goes from distributed load test for deflection by applying 27kg mm load on top and concentric load test by applying sokg load on weaker section ; " "slide60 frame 1200ht for cubicle partition supply fitting & fixing of sos make sl 60modular workstation frame the frame shall be made of extruded aluminum sections having 60mm width and average wall thickness 1 6mm the frame shall be powder coated with epoxy polyester powder with the average thickness 50 to 60 microns conforming to is 138711993 the frame shall be joined together by aluminum connectors and all visible aluminum shall be powder coated main frame shall be of 60mm thickness offering various functional and decorative finishes as well as cable management capacity height of frame available 1200mm width of frame available 1050mm 1200mm joints posts connectors trims the two frame shall be joined together in 90 degree by using post connector shall be made of crca sheet confirming to is513 2008 connectors shall be fitted to a pole with the help of m6 x 16 pan head machine screw and washer the comers shall be concealed by posts covers which shall be a half round aluminum profiles made up of aluminum extrusion confirming is733 1983 tiles the tiles shall be made to fit the shape of the module and frame these tiles shall be supported from top and bottom sides with the tile holder tile holder used to incorporate the tile at specified location shall be made of 1 2m aluminum extrusion confirming the is 733 1983 with specified powder coating finish up 50 to 60 micron tiles are made up of by following material prelaminated tiles laminate tiles shall be made up of 9mm thick prelam one side laminated particle board confirming to is2046 1995 in color as specified and 1mm groove is made on both the edge of the tile ; " chair chair made up of puarms premiumcrca tubular pipe framing duly powder coated with mesh back moulded seat cushioned with4850mmfoam ; office chair with height adjestable base for conferance room vip waiting area room done chair dimension overall height 800mm seat size 410mmwx420mmd backrest size 390mmhx580mmw supplying and placing a chalr bucket assembly the bucket assembly made up of injection moulded in pu foam and upholstered with leatherite polyurethane foam have following propertles density 5055kgm 3understructure the understructure is made up of 32x16mmthick swage plpe and25x25x12mm thick square pipe powder coated in black color having dft50to80micron fabric seat fabric malfino properties content 100polyester weight 160gsmleatherlte propertles content 100polyesterwelght268gsm ;

State Government

TRN :34843231 | 30 Jul, 2025

Tender Value : 17.76 Lacs

Trivandrum - Kerala

Tender for gem bids for office chair v3 q2, steel shelving cabinets adjustabletype confirming to is 3312 v4 q3, metal beds v3 q2 . . % % 4 4 /mse exemption for years ofexperience and turnoverno& % & % . . % % 4 4 /startup exemption for years ofexperience and turnoverno 5 5 & & /document requiredfrom sellercertificate requested in atc, oem authorizationcertificate, additional doc 1 requested in atc, additionaldoc 2 requested in atc, compliance of boq specificationand supporting documentin case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer7 7 9 9 : : ; ; & 9 & 9 < < 9 9 ; ; > >? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?no -- b b c c 5 5 d d / minimum number ofbids required to disable automatic bidextension1 d /bid number: gem/2025/b/6405627; /dated: 15-07-2025 & & / bid document1 / 15 ; 9; 9 d d, , m m -- / / number of days for which bidwould be auto--extended7 o %o % ;5 ;5 ; ; /bid to ra enabledno 4 4 /type of bidtwo packet bid4 4 r r /primary product categoryoffice chair v3 s s & u & u /time allowed for technicalclarifications during technical evaluation2 days v v b b w w v v 4 4 / % % < 9 < 9 : : /inspection required byempanelled inspection authority / agenciespre-registered with gemno s s /estimated bid value1776000 s s w w /evaluation methoditem wise evaluation/ y & y & /arbitration clauseno /mediation clauseno //bid details /emd detail b /requiredno /epbg detail > /advisory bankstate bank of india 4 %/epbg percentage%5.00 b /duration of epbgrequired months.38a. , , \ v < ; / emd & performance securityshould bein favour of beneficiary, wherever it is applicable. \ \ /beneficiary : director, sctimstsree chitra tirunal institute for medical sciences and technology sctimst, thiruvananthapuram, departmentof science and technology dst, ministry of science and technologydirector, sctimst /splitting2 / 15 ; / bid splitting not applied. /mii purchase preference /mii purchase preferenceyes /mse purchase preference /mse purchase preferenceyes1. preference to make in india products for bids < 200 crore:preference shall be given to class 1 local supplieras defined in public procurement preference to make in india, order 2017 as amended from time to time and itssubsequent orders/notifications issued by concerned nodal ministry for specific goods/products. the minimumlocal content to qualify as a class 1 local supplier is denoted in the bid document. if the bidder wants to avail thepurchase preference, the bidder must upload a certificate from the oem regarding the percentage of the localcontent and the details of locations at which the local value addition is made along with their bid, failing whichno purchase preference shall be granted. in case the bid value is more than rs 10 crore, the declaration relatingto percentage of local content shall be certified by the statutory auditor or cost auditor, if the oem is a companyand by a practicing cost accountant or a chartered accountant for oems other than companies as per the publicprocurement preference to make-in -india order 2017 dated 04.06.2020. only class-i and class-ii local suppliersas per mii order dated 4.6.2020 will be eligible to bid. non - local suppliers as per mii order dated 04.06.2020 arenot eligible to participate. however, eligible micro and small enterprises will be allowed to participate .thebuyers are advised to refer the om no.f.1/4/2021-ppd dated 18.05.2023.om no.1 4 2021 ppd dated 18.05.2023 for compliance of concurrent application of public procurement policyfor micro and small enterprises order, 2012 and public procurement preference to make in india order, 2017. 2. purchase preference will be given to mses having valid udyam registration and whose credentials arevalidated online through udyam registration portal as defined in public procurement policy for micro and smallenterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises andits subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail themselves of thepurchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders areexcluded from the purview of public procurement policy for micro and small enterprises and hence resellersoffering products manufactured by some other oem are not eligible for any purchase preference. in respect of bidfor services, the bidder must be the service provider of the offered service. relevant documentary evidence inthis regard shall be uploaded along with the bid in respect of the offered product or service and buyer will decideeligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 isnot an mse and mse seller s has / have quoted price within l-1+ 15% selected by buyer of margin ofpurchase preference /price band defined in relevant policy, such mse seller shall be given opportunity to matchl-1 price and contract will be awarded for 25% selected by buyer percentage of total quantity. the buyers areadvised to refer the om no. f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 forcompliance of concurrent application of public procurement policy for micro and small enterprises order, 2012and public procurement preference to make in india order, 2017. benefits of mse will be allowed only if seller isvalidated on-line in gem profile as well as validated and approved by buyer after evaluation of documentssubmitted. 3. estimated bid value indicated above is being declared solely for the purpose of guidance on emd amount andfor determining the eligibility criteria related to turn over, past performance and project / past experience etc.this has no relevance or bearing on the price to be quoted by the bidders and is also not going to have anyimpact on bid participation. also this is not going to be used as a criteria in determining reasonableness ofquoted prices which would be determined by the buyer based on its own assessment of reasonableness andbased on competitive prices received in bid / ra process. s s s s / evaluation method item wise evaluation method contract will be awarded schedulewise and the determination of l1 will be done separately for each schedule.the details of item-consignee combination covered under each schedule are as under:3 / 15 s /evaluation schedules s /estimated value & / / item/category /quantityschedule 1208000office chair v332schedule 2800000steel shelving cabinets adjustable typeconfirming to is 3312 v432schedule 3768000metal beds v364office chair v3 32 pieces 5 5 1 2 & & % % % % ^ ^ < < % % 4 4 b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively u u /technical specifications u / as per gem category speci cation /speci cation u u /specificationname b b s s /bid requirementallowed valuesgeneralrequirementchair typenon-revolving and non-tilting chair with armrest, non-revolving and non-tilting chair without armrestunderstructurechair understructure typecantilever, legsunderstructure materialerw tube conforming to is : 1161 latest, aluminiumpipe hollow section conforming to is: 1285 latest, stainless steel ss 202, stainless steel ss 304, stainless steel ss 316, mild steel, solid woodthe shape of tubularsection of understructureround, square, rectangular, elliptical, nasection sizediameter/sides ofunderstructure19 mm, 22 mm, 25 mm, 30 mm, 19x19 mm, 25x25mm, 30x30 mm, 25x15 mm, 30x12 mm, 30x15 mm, 30x20 mm, 45x19 mm, 35x15 mm, 38x20 mm, naunderstructure wallthickness mm1, 1.2, 1.6, 2, 2.5, 3, na for woodcastoryes, noseatseat materialmoulded pu, pu foam, mesh, caned, hot pressedplywooddensity of pu used in seatkg per cubic meter< 30, >30< 40, >40< 50, >50, nathickness of pu used inseat mm< 30, >30< 40, >40< 50, >50, naminimum seat height fromfloor surface mm< 400, >400< 500, >500width of seat mm< 400, >400< 450, >450depth of seat mm< 400, >400< 450, >450seat upholstery materialmesh fabrics, polyester fabric, leatherette, leatherette with spacer fabric, leather, caned, moulded pu4 / 15 backrestbackrest base framematerialmild steel frame, hot pressed plywood, solid wood, injection moulded plasticbackrest materialmoulded pu, pu foam, mesh, caned, hot pressedplywooddensity of pu used inbackrest kg per cubicmeter< 30, >30< 40, >40< 50, >50, nathickness of pu used inbackrest mm< 30, >30< 40, >40< 50, >50, nawidth of backrest mm< 400, >400< 450, >450backrest height from theseat level> 350< 450, >450< 550, >550backrest upholsterymaterialmesh fabrics, polyester fabric, leatherette, leatherette with spacer fabric, leather, caned, moulded puarmrestarmrest typeoverhanging armrest, continuous armrest, mouldedarmrest continuously fitted with seat and back, moulded t armrest fitted with seat bottom, mouldedarmrest mounted to frame, without armrestarmrest movementadjustable, fixed, without armrestswarrantywarranty period in numberof years1, 2, 3, 4, 5 or higher year /speci cation u u /specificationname b b s s /bid requirementallowed valuesadditional specification parameters - office chair v3 32 pieces specification parameternamebid requirement allowed valuesremarksdetailed specification is included in buyer added bid specific atc. biddersshould submit declaration regarding the compliance of the specification.* bidders offering must also comply with the additional specification parameters mentioned above. //o ; a o ; a /consignees/reporting officer and quantity5. .5. ./s.no. //o ; a o ; a /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1shiju v s695011, sree chitra tirunalinstitute for medical scienceand technology, medicalcollege po, trivandrum3230steel shelving cabinets adjustable type confirming to is 3312 v4 32 pieces 5 / 15 5 5 1 2 & & % % % % ^ ^ < < % % 4 4 b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively u u /technical specifications* u / as per gem category speci cation /speci cation u u /specificationname b b s s /bid requirementallowed valuesstandards andcertificationsgoverning standardconformity to is 3312generictypes of shelving cabinetsdimensions are withoutpedestal heightsmall 1150 mm x 760 mm x 430 mm, large 1855mm x 910 mm x 480 mmavailability of drawersyes, noavailability of lockersyes, noadditional specification parameters - steel shelving cabinets adjustable type confirming to is3312 v4 32 pieces specification parameternamebid requirement allowed valuesremarksdetailed specification is included in buyer added bid specific atc. biddersshould submit declaration regarding the compliance of the specification.* bidders offering must also comply with the additional specification parameters mentioned above. //o ; a o ; a /consignees/reporting officer and quantity5. .5. ./s.no. //o ; a o ; a /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1priya p695011, sree chitra tirunalinstitute for medical scienceand technology, medicalcollege po, triavndrum3230metal beds v3 64 pieces 5 5 1 2 & & % % % % ^ ^ < < % % 4 4 b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively u u /technical specifications* u / as per gem category speci cation6 / 15 /speci cation u u /specificationname b b s s /bid requirementallowed valuesgenerictype of metal bedmetal bed, metal bed with headboard only, metal bedwith footboard only, metal bed with headboard andfootboard, metal bed with headboard, footboard andcanopysize category of metal bedsingle, double, queen size, king size, super king sizeoverall length of bed inmm1800 - 1850 mm, 1850 - 1900 mm, 1900 - 1950 mm, 1950 - 2000 mmoverall width of bed inmm750 - 900 mm 2.5 to 3 ft, 900 - 1050 mm 3 to 3.5ft, 1050 - 1200 mm 3.5 to 4 ft, 1200 - 1350 mm 4to 4.5 ft, 1350 - 1500 mm 4.5 to 5 ft, 1500 - 1650mm 5 to 5.4 ft, 1650 - 1800 mm 5.4 to 6 ft, 1800 -1950 mm 6 to 6.4 ft, 1950 - 2100 mm 6.4 to 6.9 ftoverall height of bed frominstallation level in mm150 - 200 mm, 200 - 250 mm, 250 - 300 mm, 300 -350 mm, 350 - 400 mm, 400 - 450 mm, 450 - 500mm, 500 - 550 mm, 550 - 600 mmavailability of headboardyes, noavailability of footboardyes, nometal bed framematerial of bed frameincluding legsmild steel, aluminium, wrought ironmetal bedmattress supportpaneltype of bed mattresssupporthorizontal beams only, vertical beams only, crossbeams - horizontal & vertical combomaterial of bed mattresssupport panelmild steel, aluminium, wrought ironmetal bedheadboardmaterial of bed headboardframemild steel, aluminium, wrought iron, nametal bedfootboardmaterial of bed footboardframemild steel, aluminium, wrought iron, naadditional specification parameters - metal beds v3 64 pieces specification parameternamebid requirement allowed valuesremarksdetailed specification is included in buyer added bid specific atc. biddersshould submit declaration regarding the compliance of the specification.* bidders offering must also comply with the additional specification parameters mentioned above. //o ; a o ; a /consignees/reporting officer and quantity7 / 15 . .5. ./s.no. //o ; a o ; a /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1shiju v s695011, sree chitra tirunalinstitute for medical scienceand technology, medicalcollege po, trivandrum6430special terms and conditions-version:1 effective from 25-06-2024 for category office chair v31. special terms and conditions1. the colours for the seat and back, are speci ed based on the procurement done by various buyerson gem. 2. sellers are advised to refrain from uploading any catalogue selecting image colour other than theoption chosen for the catalogue, as available in the category. any mismanagement of this will betreated seriously as per gem policies.3. in case buyer requires to buy any other colour not covered in the category, same may be speci edunder additional parameters while creating the bid. the colours mentioned in the additionalparameters by the buyer in the bid shall prevail over the colours indicated in the catalogue.4. sellers are advised to check the complete bid document while offering their prices.5 5 : : d d/buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period theadditional time shall commence from the last date of extended delivery period. the additional deliverytime shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the originaldelivery period while exercising the option clause. bidders must comply with these terms.2. genericbidder financial standing: the bidder should not be under liquidation, court receivership or similarproceedings, should not be bankrupt. bidder to upload undertaking to this effect with bid.3. genericbidders shall quote only those products part of service delivery in the bid which are not obsolete in themarket and has at least 7 years residual market life i.e. the offered product shall not be declared end-of-life by the oem before this period.4. certificatesbidders offer is liable to be rejected if they dont upload any of the certificates / documents sought in thebid document, atc and corrigendum if any.5. genericbidders are advised to check applicable gst on their own before quoting. buyer will not take any8 / 15 responsibility in this regards. gst reimbursement will be as per actuals or as per applicable rateswhichever is lower, subject to the maximum of quoted gst %.6. buyer added bid specific atcbuyer added text based atc clausesa. bidders are advised to quote prices as per technical specification and additional specification. bidders should not include price bid in the technical bid. the price format to be submitted along with financial bid only. if any of the price components disclosed in the technical bid, the bid will summarily be rejected and thebidder will be disqualified from further bidding process.b. bidders should submit the manufacturers authorization in attached format- a buyer uploaded atc documentc. liquidated damages:if the supplier fails to deliver or install/commission any or all the goods or fails to perform the services within the time frames incorporated in the purchase order, the purchaser shall, without prejudice to other rights and remedies available to the purchaser under the contract, deduct from the contract price, asliquidated damages, a sum equivalent to 0.5% per week of delay or part thereof on delayed supply of goods, installation, commissioning and/or services until actual delivery or performance subject to a maximum of 10 % of the contract price. once the maximum is reached purchaser may consider termination of the contract.if any delay by the supplier is maintained its contractual obligations towards delivery of goods andperformance of services shall render the supplier liable to any or all of the following sanctions:a. imposition of liquidated damages, b. forfeiture of its performance security andc. termination of the contract for defaultd. sctimst reserves the right to ask for a free demonstration of the quoted equipment/ items after giving reasonable time to the bidder at a pre-determined place acceptable to the purchaser or at a site in case of non-portable and heavy equipment for evaluating the technical compatibility as per the bidding documentspeci cations, professionalism and quality of work of the bidder for technically qualifying for opening the price bid. sctimst reserves the right to accept/ reject the bid based on the product/ site evaluation as stated above.1 2 door storage cupboards. indent no: 1 qty 32 supply & installation of 2 door cupboards the storage size should be 900w x 507d x 1950ht +/-1 mm. storage should be completely knock down construction. storage skirting should be removableand to cover integral legs and legs should be fitted with screw type leveller. storage should be made from combination of crca 0.8 mm & 0.6 mm thickness. storage door should be provided with steel hinge door. door lock should be 3-way 90 degree removable key type cam lock &locking mechanism and handle should be base aesthetically appealing, ergonomic, flush with door made from zinc alloy.9 / 15 one locker should be placed in the rh side of the storage with hinge door and 2-way cam lock with knob type handle top side full shelf should be fixed and adjustable half shelves 1 no on rh side of the storage & 2 no s on lh side of vertical partition. one number hanging rod should be provided on left half of partition below top shelf & another one on right half below locker both mounted on snap-ontype plastic brackets. storage nish should be epoxy powder coated to the thickness of 50 microns +/-10. product should be certified by bifma, greenguard, greenpro, aiota, and iaq2 cantilever chair. indent no.3 qty 32 supply &installation of non revolving chair the chair seat should be made of injection moulded in glass lled polypropylene compound which is upholstered with fabric upholstery covers and moulded polyurethane foam. the chair back should be injection moulded in glass lled polypropylene compound which is upholstered with mesh fabric seat size should be: 50 cm. d x48 cm. w back size should be: 53 cm. w x 39 cm. d the foam should be high-resilience polyurethane moulded with density 45+/-2 kg/m and hardness 16+/-2 kgf as per is: 7888 for 25% compression. chair under structure should be cantilever with powder coateddft 50 10 microns welded tubular main frame is made from 2.54 0.03 cm x 0.2 0.016cm and 1.9 0.3mm x 0.12 0.0096 cm with mild steel electric resistance welding tube. the armrest should be made of glass filled polypropylene compound andassembled over the tubular frame the chair shoes should be made of glass lled polypropylene compound with and pressed fitted with tubular frame. felt is provided below the shoes. 10 / 15 3 single bed with head and footboard. indent no.4 qty 64 supply & installation of single size metal bed. the bed size should be 2080w x 925d x 385 ht +/-1 mm. bed should be completely knock down construction with metal frame material. metal frame size should be mild steel pipe 25.4x 50.8 x 1.2 thk, mild steel pipe 19.05x 19.05 x 0.8 thk and angle 20x20x1.6 thk +/-0.1mm. bed should be provided with headboard & footboard bed nish should be epoxy powder coated to the thickness of 50 microns +/-10. product should be certi ed by bifma, green guard, green pro, aiota, and iaq additional terms and conditions1 the bidder participating in the tender should be an oem or an authorized dealer. upload manufacturer authorization: wherever authorized distributors are submitting the bid, manufacturers authorization form maf/certi cate withoem details shall also be uploaded.2 splitting up of bid items is not possible. bidder shall quote for all products mentioned in the bill of quantity. bidders o er is liable to be rejected if theydo not quote for all products mentioned in bill of quantity boq.3 bidder should upload speci cation and catalogues of the quoted products. bidder should provide the available colour options for the o ered chairs, lpsc reserves the right to choose the colours from the available options for the above items and the same will be mentioned in the p.o. 4 service escalation matrix of the bidder should be provided with o ce set up and warehouse details in kerala. registration certi cate also to be submitted as documentary evidence.5 the supplied products should be designed and tested as per bifma standards for comfort, safety, and durability.6 the bidder/oem should have manufacturing facility in india and they shall manufacture in accordance with iso 9001:2015, 14001:2015, 45001:2018 and 500o1:2018follow safety norms in accordance of ohsas7 the bidder/ oem should have green guard, aiota, iaq, green pro and griha certi cation for the o ered furniture which are in accordance with environment requirements and recognized under ministry of new and renewable energy.11 / 15 the bidder / oem themselves or through resellers, should have executed project for supply and installation / commissioning of same or

Related Sub Industries : Railway Ancillaries

List of lock Tenders

Tender for supply of locking bar assembly.

Tender for supply of automatic twist locks for blc wagon.

Tender for supply of 500a, 750v zs coupling socket with locking arrangement but without cable.

Get Lock Tender Alert...

Related Sub Industries : Railway Ancillaries

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us