Filters

List of packing-articles Tenders

List of latest packing-articles Tenders in Indian Tenders. Click on any packing-articles Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for packing-articles Tenders.

All-Tenders (171)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :49059492 | 14 May, 2025

Tender Value : 20.00 Lacs

Saharanpur - Uttar Pradesh

Tender for tender for patch repair work on roads under the assistant engineer i. - providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam grade-3 specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled static roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening/binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density as per the technical specification and direction of engineer-in-charge. 2 providing and applying tack coat with bitumen vg-10 using bitumen pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. 3 providing, laying and rolling of open graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using vg-10 grade bitumen @ 1.46 kg/sqm. to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades including tack coat @ 0.25 kg/sqm as per the technical specification and direction of engineer-in-charge. (including cost of bitumen) 4 providing and laying seal coat by manual means with vg-10 grade bitumen @ 0.68 kg/sqm. sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type b as per the technical specification and direction of engineer-in-charge. (including cost of bitumen)

State Government

TRN :49059529 | 14 May, 2025

Tender Value : 20.00 Lacs

Saharanpur - Uttar Pradesh

Tender for tender for patch repair work on roads under the assistant engineer iv - providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam grade-3 specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled static roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening/binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density as per the technical specification and direction of engineer-in-charge. 2 providing and applying tack coat with bitumen vg-10 using bitumen pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. 3 providing, laying and rolling of open graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using vg-10 grade bitumen @ 1.46 kg/sqm. to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades including tack coat @ 0.25 kg/sqm as per the technical specification and direction of engineer-in-charge. (including cost of bitumen) 4 providing and laying seal coat by manual means with vg-10 grade bitumen @ 0.68 kg/sqm. sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type b as per the technical specification and direction of engineer-in-charge. (including cost of bitumen)

Government Departments

TRN :49059548 | 21 May, 2025

Tender Value : 38.53 Lacs

Fatehpur - Uttar Pradesh

Tender for tender for link road kakharu kot road to rosanpur majre bara gram tak road construction work - earthwork in cutting or embankment /pattri in ordinary soil (loam, clay or sand) excavation to be done in the from of regular pits not exeeding 0.50m in depth and earthwork in embankment to be in 20cm layers including the ramming and dressing the surface to required levles and slopes and also including 1.50meter lift and 1000meter lead as directed by e/i including labour t&p etc required for proper completion of work (as per si no-253) 2 gsb- gramular sub-base with well graded material (table 400,1) a) by mix in place method contrcution of granular sub-base by providing well graded material spreading in unform layers with motor grader/tractor mounted appropriate equipment on prepaire suface maxing by mix in place method with rotavator at omc, and compacting with smooth roller to achieve the desired density, complete as per clause 401 3 wbm g-2 (inter coat)providing and laying spreading and compacting stone aggregates of specific sizes to water bound macadam specification incluidng spreading in uniform thickness hand packing rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber applying and brooming stone screening /binding materials to fill-up the interstices of coarse aggregate watering and compacting to the required dencity grading -2 as per technical specification clause 405 4 wbm g-3 - providing and laying spreading and compacting stone aggregates of specific sizes to water bound macadam specification incluidng spreading in uniform thickness hand packing rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber applying and brooming stone screening to fill-up the interstices of coarse aggregate watering and compacting to the required dencity as per technical specification clause 405 5 brick edging on both sides of metalled surface 12 cm deep & 8 cm wide with class m-150 bricks laid on edge and dry in proper grade and alignment including cost of all material, labour and t&p etc.complete and all taxes as per direction of e/i. 6 providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.75 kg / sqm using mechanical means. as per technical specification clause 502 including cost of bitumen emulsion (ss-1) 7 providing and applying tack coat with bitumen (vg-10)using bitumen pressure distributor at the rate of 0.35kg per sqm on the prepared bituminous surfacecleaned with hydraulic broom as per technical speicification clause 503 including cost of bitumen (vg-10) 8 providing, laying and rolling of open-graded premix carpet of 20mm thickness composed of 13.2 to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line grade and level to serve as wearing coarse on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100kn static roller capacity finished to required lavel and grades to be followed by seal coat as per techincal specification clause 508 including cost of bitumen 9 providing and applying seal coat type c comprising of a layer of bituminous binder followed by a cover of stone chipping of specified grading and rolling with power roller 8-10 tonne kn static roller and finishing to required level and grades as per technical specification clause 510 including cost of bitumen 10 s/f of 350 mm dia hume pipe 11 s/f of reflectivesign board,etc 12 the routing maintenance of above road including earthen shoulder and bitumenous pavement etc of to the required standards and it the manner as defined in cb condition and keep the entire road surfaceand structure in defect free condition during the entire maintenace period which begins from the actual completion data and ends after five years (including cost of material t&p labour but excluding gst) for1 st year maintenance cost @ 0.0 % 13 the routing maintenance of above road including earthen shoulder and bitumenous pavement etc of to the required standards and it the manner as defined in cb condition and keep the entire road surfaceand structure in defect free condition during the entire maintenace period which begins from the actual completion data and ends after five years (including cost of material t&p labour but excluding gst) for2nd year maintenance cost @ 0.75 % 14 the routing maintenance of above road including earthen shoulder and bitumenous pavement etc of to the required standards and it the manner as defined in cb condition and keep the entire road surfaceand structure in defect free condition during the entire maintenace period which begins from the actual completion data and ends after five years (including cost of material t&p labour but excluding gst) for3rd year maintenance cost @ 1.50 % 15 the routing maintenance of above road including earthen shoulder and bitumenous pavement etc of to the required standards and it the manner as defined in cb condition and keep the entire road surfaceand structure in defect free condition during the entire maintenace period which begins from the actual completion data and ends after five years (including cost of material t&p labour but excluding gst) for4thyear maintenance cost @ 2.25 % 16 the routing maintenance of above road including earthen shoulder and bitumenous pavement etc of to the required standards and it the manner as defined in cb condition and keep the entire road surfaceand structure in defect free condition during the entire maintenace period which begins from the actual completion data and ends after five years (including cost of material t&p labour but excluding gst) for5thyear maintenance cost @ 3.00 %

State Government

TRN :49059554 | 16 May, 2025

Tender Value : 24.60 Lacs

Kasganj - Uttar Pradesh

Tender for tender for re-construction of gorha pwd road - wbm grading 3-providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405. (a)by manual means 2 cement concrete pavement(c.c road) construction of un-reinforced plain cement concrete pavement thickness as per design, over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2 m 30 (grade) coarse and fine aggregates conforming to is 383 maximun size of coarse aggregate not exceeding 25mm mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed side from work (steel channel laying and fixing of 125 micron thick plastic sheet, wedges steel plates including levelling the form work as per drawing) spreading the concrete with shovels, rakes compacted using needle, screed and plate vibrators and finished in continuous opration including provision of contraction and expansion construction joints applying debonding strips primer, sealant admixtures as approved curing concrete slabs for 14 days, curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501. 3 construction of embakment with approved material obtained from borrow pits with all lift upto 1.5 m,transporting to site, compacted to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as pertechnical specification clause 301.5 4 excavation in soil mixed with moorum shingle kankar requiring the use of special tools and plants such a pick axes subbals etc.forbuilding/drain workonly 5 providing and laying cement concrete in 1:3:6 (1cement:3coarsesand:6graded stoneaggregate40mmnominalsize) including supply of all material, labour and t&p etc. required for proper completion of the work. 6 reinforced cement concrete workinwalls (anythickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers,abutments, posts and struts etc. including cost of centering, shuttering, finishing and excluding reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate20 mm nominal size) 7 supplying, fitting and placing un-coated hysd bar reinforcement in foundation complete asper drawing and technical specifications. 8 05 year maintenance charge routine maitenance of road for 05 years after the competion of work (vide shasanadesh no. 17/2024/??0-113/23-1-2024-23-1099/113/2023 dated 16.01.2024 & letter no. 36890c/rmc/mool-23-24 dated 17.02.2024 of enc pwd. rate excluding of g.s.t.) 1-1st year 9 maintenance for 2nd year at cost of total execute work 10 maintenance for 3rd year at cost of total execute work 11 maintenance for 4th year at cost of total execute work 12 maintenance for 5th year at cost of total execute work

Central Government/Public Sector

TRN :49059768 | 03 Jun, 2025

Tender Value : 0

Izzatnagar - Uttar Pradesh

Tender for supply of tab. pioglitazone with metformin & glimepiride (15/500/1 )tab. pioglitazone with metformin & glimepiride (15/500/1 ),each tab/cap contains pioglitazone 15 mg with metformin 500 mg (sr/er) and glimepir ide 1mg packed in pvc / silver foil strip ] divisional rly. hospital- izn, 80000.00 numbers ner => limited

Local Bodies

TRN :49061073 | 14 May, 2025

Tender Value : 11.12 Lacs

Meerut - Uttar Pradesh

Tender for tender for reboring of 10 hp mini nalkoop in 5 location as per nit. - making bore by machine drill bit suitable for 200mm dia casing form 00 gl to 60 mtr bgl p.v.c pipe-all t&p labour charge etc.00 to 30 mtr 2 making bore by machine drill bit suitable for 200mm dia casing form 00 gl to 60 mtr bgl p.v.c pipe-all t&p labour charge etc.30 to 60 mtr 3 s/f 180 mmx 8kg /cm2 p.v.c 8kg/cm2 pipe i.s.i marktirupati/supreme/kissan make 4 s/f 80mm dia g.i pipe b class with flenge incl. threading and welding of pipe and flaenge 5 s/f 3 core 6 mm =2 flat copper cable i.s.i mark finolex/ kei/rajdhani /plaza make . 6 s/f m.s nut bolt-1.5 x 3/8 7 s/f flange rubber packing 8 making of tubeweel chamber .i/c-all required material and t&p-labour charges etc. 9 making line connection from tubewell supply line with to connect distribution supply line. i/c-all require material and labour charges etc. 10 chemical and becterological test and photography . 11 lifting of motor pump set from old bore and lowering into new bore. i/c t&p and labour charges . 12 s/f of 3 core hydril cable 13 removing of malva from site and photograph and writing of address of 40 h.p mini nalkoop on m.s pannel box. 14 s/o 10 hp submersible motor pump set i.s.i mark 75-80 mtr head 300-400 lpm capacity 15 s/o m.u.g 10 starter pannel i.s.i mark suitable for 10 h.p submersible motor pump set. 16 taking out of motor pump set,g.i pipe and cable from old bore by mechanical method (with the halp of machine) incl material t&p and labour charge etc. 17 s/f of 80 mm dia reflex valve i.s.i mark. 18 for 5 summersible

Local Bodies

TRN :49061310 | 14 May, 2025

Tender Value : 2.22 Lacs

Meerut - Uttar Pradesh

Tender for tender for reboring of 10 hp mini tubewell in ward 49 purva parshad kasim wali gali kotla - making bore by machine drill bit suitable for 200mm dia casing form 00 gl to 60 mtr bgl p.v.c pipe-all t&p labour charge etc.00 to 30 mtr 2 making bore by machine drill bit suitable for 200mm dia casing form 00 gl to 60 mtr bgl p.v.c pipe-all t&p labour charge etc.30 to 60 mtr 3 s/f 180 mmx 8kg /cm2 p.v.c 8kg/cm2 pipe i.s.i marktirupati/supreme/kissan make 4 s/f 80mm dia g.i pipe b class with flenge incl. threading and welding of pipe and flaenge 5 s/f 3 core 6 mm =2 flat copper cable i.s.i mark finolex/ kei/rajdhani /plaza make . 6 s/f m.s nut bolt-1.5 x 3/8 7 s/f flange rubber packing 8 making of tubeweel chamber .i/c-all required material and t&p-labour charges etc. 9 making line connection from tubewell supply line with to connect distribution supply line. i/c-all require material and labour charges etc. 10 chemical and becterological test and photography . 11 lifting of motor pump set from old bore and lowering into new bore. i/c t&p and labour charges . 12 s/f of 3 core hydril cable 13 removing of malva from site and photograph and writing of address of 40 h.p mini nalkoop on m.s pannel box. 14 s/o 10 hp submersible motor pump set i.s.i mark 75-80 mtr head 300-400 lpm capacity 15 s/o m.u.g 10 starter pannel i.s.i mark suitable for 10 h.p submersible motor pump set. 16 taking out of motor pump set,g.i pipe and cable from old bore by mechanical method (with the halp of machine) incl material t&p and labour charge etc. 17 s/f of 80 mm dia reflex valve i.s.i mark.

Statutory Bodies and Commissions/Committees

TRN :49061537 | 29 May, 2025

Tender Value : 0

Ujjain - Madhya Pradesh

Tender for tender for food and hotel price list; food list premium lunch packing disposable plastic boxes 5 tawa roti butter covered in aluminium wrapper one bowl of dal 150 ml seasonal dry vegetable 100 gm, raita 150 ml, basmati rice 150 gm salad 100 gm, one dessert one spoon rate in plastic disposable lunch boxes per lunch pack superior lunch packing disposable plastic boxes one paratha, 4 tawa roti butter covered in aluminium wrapper one bowl of dal 150 ml seasonal dry vegetable 100 gm, paneer vegetable 150 ml fruit raita 150 ml rice basmati one 150 ml green salad 100 gm pickle, papad, one dessert one spoon rate in plastic disposable lunch boxes per lunch pack lunch chef tawa roti pudi dal, seasonal vegetable, raita, basmati rice, green salad, dessert including filter water can arrangement (water treatment material will remain with you) rate per person lunch buffet premium tawa roti puri dal, seasonal vegetable, paneer vegetable, raita, rice vasmati green salad, sweet pickle, spoon and disposable glass filter water can (including the material related to the buffet) rate per person lunch buffet superior tawa roti mixer roti puri, dal, sahi paneer seasonal vegetable.. dry vegetable foot raita jeera rice vasmati green salad, papad, sweet mawa pickle, disposable glass spoon, ice cream soup tissue paper and filter water can (including the material related to the buffet) rate per person pudi packet 10 puri dry vegetable 200 gm 100 gm raita nave sweet, pickle with one green chilli packing in box rate per packet snack packing box paneer patties 50 gm mawa mithai, 25 gm chips 25 gm namkeen bikaji, two biscuits shatterwhite snack plate- two aalushda 200 gm 100 gms jalebi breakfast plate - 100 gms poda, kachori 75 gms 100 gms jalebi breakfast buffet poha jalebi, tea rate per person breakfast buffet poda, jalebi, dahi paratha rate per person breakfast buffet chole bature dradhli somar rate per person breakfast buffet chole bature pakoras rate per person samosa 100 gms rate per piece .... more in document

Cooperative

TRN :49061885 | 27 May, 2025

Tender Value : 15.00 Lacs

Bhilwara - Rajasthan

Tender for supply of pp bottles for flavoured milk 200 ml with lids and wades , poly propylene bottles with lids and wades suitable to resist 121 degree celsius temperature, caller round, suitable for 200 ml flavored milk , lids and wades suitable for above bottles

State Government

TRN :49062033 | 13 May, 2025

Tender Value : 2.34 Lacs

Paravur - Kerala

Tender for tender for pakarappally devaswom - paravur group - constructing toilet block-- 1 appendix i-constructing toilet block 2 earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.all kinds of soil 3 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) 4 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size) 5 centering and shuttering including strutting, etc. and removal of form for:foundations, footings, bases of columns, etc for mass concrete 6 solid block masonry using pre cast solid blocks (factory made) of size 30x20x15 cm or nearest available size confirming to is 2185 part i of 1979 for foundation and plinth with thickness 15cm in: cm 1:6 ( 1 cement :6 coarse sand) etc complete 7 providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size 8 steel reinforcement for r.c.c work including straightening, cutting, bending, placing in position and binding all complete upto plinth level thermo - mechanically treated bars of grade fe-500d or more 9 solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to is 2185 part i of 1979 for super structure up to floor two level with thickness 15cm in : cm 1:6 ( 1 cement : 6 coarse sand) etc complete 10 reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (zone iii) : 3 graded stone aggregate 20 mm nominal size). 11 centering and shuttering including strutting, etc. and removal of form for:lintels, beams, plinth beams, girders bressumers and cantilevers 12 steel reinforcement for r.c.c work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelthermo - mechanically treated bars of grade fe-500d or more 13 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 14 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.size of tile 600 x 600 mm. 15 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineerin-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 16 providing and fixing water closet squatting pan (indian type w.c. pan) with 100 mm sand cast iron p or s trap, 10 litter low level white p.v.c.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:white vitreous china orissa pattern w.c. pan of size 580x440 mm with integral type foot rests 17 supplying and fixing cp towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site engineer-in-charge. 18 providing and fixing white vitreous china pedestal type water closet (european type w.c. pan) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:w.c. pan with isi marked white solid plastic seat and lid 19 providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:white vitreous china flat back wash basin size 550x400mm with single 15 mm c.p.brass pillar taps 20 finishing walls with acrylic smooth exterior paint of required shade:new work (two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 21 supply and fixing pvc door with frame including locking arrangements as per the direction of engineer-in-charge 22 providing and fixing m.s. grills of required pattern in frames of windows etc. with m.s. flats, square or round bars etc. including priming coat with approved steel primer all complete.fixed to openings/ wooden frames with rawl plugs screws etc 23 providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineer-in-charge. the sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 24 structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 25 providing and placing on terrace (at all floor levels) polyethylene water storage tank :isi 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 26 supplying and fixing cp health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge. 27 providing and fixing c.p brass bib cock of approved quality conforming to is: 8931.15 mm nominal bore 28 providing and fixing c.p. brass shower rose with 15 or 20 mm inlet:100 mm diameter 29 appendix ii-septic tank and soak pit 30 supplying and installing ready made pvc septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge (provision for cc/rcc/sand/06mm aggregate for the preparation of bed shall be paid separately. 4.35 to 50 flush capacity

Related Sub Industries : Non Classified

List of packing-articles Tenders

Tender for supply of pp bottles for flavoured milk 200 ml with lids and wades , poly propylene bottles with lids and wades suitable to resist 121 degree celsius temperature, caller round, suitable for 200 ml flavored milk , lids and wades suitable for above bottles

Get Packing Articles Tender Alert...

Related Sub Industries : Non Classified

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us