Filters

List of latest automobile-ancillaries Tenders in Indian Tenders. Click on any automobile-ancillaries Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for automobile-ancillaries Tenders.

All-Tenders (49)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :20859511 | 01 Jun, 2021

Tender Value : 12.81 Lacs

Sundergarh - Orissa

Tender for road works - trimming grass and weeds removal of rubbish up to a distance of 30 m outside the periphey of the area as per technical specification clause 201.1of mord specification for rural roadsand as per the direction of the engineer-in-charge, construction of embakment with approved materials obtained from borrow pits with all leads and lifts transporting to site by mechanical means spreading grading to required slope compacting to meet the requirements of table 300.2 and clause 305 of mosrth specification for road and bridge works 4th revision and as per the direction of the engineer-in-charge, providing and applying tack coat with bitumen emulsion rs-1 using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per the direction of the engineer-in-charge, providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per technical specification clause 504 and as per the direction of the engineer-in-charge, providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen, transported to site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolling with smooth wheeled, vibratory roller and tandem rollers to achieve the desired compaction as per clause-508 of mosrt&h specification for road & bridge works4th revision as per specification and direction of engineer -in –charge, painting two coats over wood and iron work with approved enamel paint over a coat of primming, including cost and conveyance of all materials to site, and all labour charges complete as per direction of e.i.c, reinforced cement concrete m 15 grade kilometre stone of standard design as per irc : 8 fixing in position including painting and printing etc as per drawing and as per the direction of the engineer-in-charge, ordinary kilometer stone, 200 mm stone, providing and fixing of typical informatory sign board with logo as per mord specifications and drawing. three ms plates of 1.6 mm thick, top and middle plate duly welded with ms flat iron 25mm x 5m size on back on edges. the lower plate will be welded with ms angle iron frame of 25mm x 25mm x 5mm. the angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 swg sheet tubes posts duly embedded in cement concrete m-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. the top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 swg steel plate tube. all m.s. will be stove enameled on both sides. lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. all sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing clause 1701 and annexure 1700.1 of mord and as per direction of the engineer-in-charge, providing and fixing of retro reflective cautionary, mandatory and informatory sign board as per irc:67 made of 1.5 mm thick ms sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade and colour supported and welded on 47mm x 47 mm x 12 swg sheet tube firmly fixed to the ground by mean of properly designed foundations with m-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing and as per the direction of the engineer-in-charge, 900 mm equilateral triangle, 600 mm circular, 600 x 450 mm square, construction of rcc guard posts of 200 mm dia m15 grade cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical rcc posts not to exceed 1 in 500 as per drawing and as per the direction of the engineer-in-charge, new construction, painting two coats with approved synthetic enamel paint including cost and conveyance of all materials to site and all labour charges complete as per direction of e.i.c, providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5mm is excusive of surface applied glass beads as per irc:35 . the finished surface to be level, uniform and free from streaks and holes, printing new letters & figures of any shade with enamel paint black or any other approved colour to give an even shade as per drawings and technical specification clause 1701, 5 letter

State Government

TRN :20859605 | 01 Jun, 2021

Tender Value : 1.42 Crore

Sundergarh - Orissa

Tender for road works - trimming grass and weeds removal of rubbish up to a distance of 30 m outside the periphey of the area as per technical specification clause 201.1of mord specification for rural roadsand as per the direction of the engineer-in-charge, construction of embakment with approved materials obtained from borrow pits with all leads and lifts transporting to site by mechanical means spreading grading to required slope compacting to meet the requirements of table 300.2 and clause 305 of mosrth specification for road and bridge works 4th revision and as per the direction of the engineer-in-charge, providing and applying tack coat with bitumen emulsion rs-1 using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per the direction of the engineer-in-charge, providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per technical specification clause 504 and as per the direction of the engineer-in-charge, providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen, transported to site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolling with smooth wheeled, vibratory roller and tandem rollers to achieve the desired compaction as per clause-508 of mosrt&h specification for road & bridge works4th revision as per specification and direction of engineer -in –charge, painting two coats over wood and iron work with approved enamel paint over a coat of primming, including cost and conveyance of all materials to site, and all labour charges complete as per direction of e.i.c, reinforced cement concrete m 15 grade kilometre stone of standard design as per irc : 8 fixing in position including painting and printing etc as per drawing and as per the direction of the engineer-in-charge, ordinary kilometer stone, 200 mm stone, providing and fixing of typical informatory sign board with logo as per mord specifications and drawing. three ms plates of 1.6 mm thick, top and middle plate duly welded with ms flat iron 25mm x 5m size on back on edges. the lower plate will be welded with ms angle iron frame of 25mm x 25mm x 5mm. the angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 swg sheet tubes posts duly embedded in cement concrete m-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. the top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 swg steel plate tube. all m.s. will be stove enameled on both sides. lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. all sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing clause 1701 and annexure 1700.1 of mord and as per direction of the engineer-in-charge, providing and fixing of retro reflective cautionary, mandatory and informatory sign board as per irc:67 made of 1.5 mm thick ms sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade and colour supported and welded on 47mm x 47 mm x 12 swg sheet tube firmly fixed to the ground by mean of properly designed foundations with m-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing and as per the direction of the engineer-in-charge, 900 mm equilateral triangle, 600 mm circular, 600 x 450 mm square, construction of rcc guard posts of 200 mm dia m15 grade cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical rcc posts not to exceed 1 in 500 as per drawing and as per the direction of the engineer-in-charge, new construction, painting two coats with approved synthetic enamel paint including cost and conveyance of all materials to site and all labour charges complete as per direction of e.i.c, providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5mm is excusive of surface applied glass beads as per irc:35 . the finished surface to be level, uniform and free from streaks and holes, printing new letters & figures of any shade with enamel paint black or any other approved colour to give an even shade as per drawings and technical specification clause 1701, 5 letter

State Government

TRN :20859722 | 01 Jun, 2021

Tender Value : 1.10 Crore

Sundergarh - Orissa

Tender for road works - trimming grass and weeds removal of rubbish up to a distance of 30 m outside the periphey of the area as per technical specification clause 201.1of mord specification for rural roadsand as per the direction of the engineer-in-charge, construction of embakment with approved materials obtained from borrow pits with all leads and lifts transporting to site by mechanical means spreading grading to required slope compacting to meet the requirements of table 300.2 and clause 305 of mosrth specification for road and bridge works 4th revision and as per the direction of the engineer-in-charge, providing and applying tack coat with bitumen emulsion rs-1 using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per the direction of the engineer-in-charge, providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per technical specification clause 504 and as per the direction of the engineer-in-charge, providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen, transported to site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolling with smooth wheeled, vibratory roller and tandem rollers to achieve the desired compaction as per clause-508 of mosrt&h specification for road & bridge works4th revision as per specification and direction of engineer -in –charge, fine dressing & turfing including transportation of turfs by mechanical means with all leads & lifts & placing of turfs in position and ramming with thapies including watering and cost of labour and all materials etc.complete as per the direction of the engineer-in-charge, reinforced cement concrete m 15 grade kilometre stone of standard design as per irc : 8 fixing in position including painting and printing etc as per drawing and as per the direction of the engineer-in-charge, ordinary kilometer stone, 200 mm stone, providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per irc:67 made of 1.5 mm thick ms sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade and colour supported and welded on 47mm x 47 mm x 12 swg sheet tube firmly fixed to the ground by mean of properly designed foundations with m-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing and as per the direction of the engineer-in-charge, 900 mm equilateral triangle, 600 mm circular, 600 mm x 450 mm rectangular, construction of rcc guard posts of 200 mm dia m15 grade cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical rcc posts not to exceed 1 in 500 as per drawing and as per the direction of the engineer-in-charge, new construction, water proofing cement base painting two coats with approved paint inclusive of cost of all material, labour and t&p etc. complete and as per the direction of the engineer-in-charge, painting on concrete / steel surfaces with epoxy painting two coats including prime coat with epoxy paint approved brand on concrete /steel surface after through cleaning of surface to give an even shade as per drawing and technical specification clause 1701 and as per the direction of the engineer-in-charge, printing new letters & figures of any shade with enamel paint black or any other approved colour to give an even shade as per drawings and technical specification clause 1701, 5 letter, providing and fixing of typical informatory sign board with logo as per mord specifications and drawing. three ms plates of 1.6 mm thick, top and middle plate duly welded with ms flat iron 25mm x 5m size on back on edges. the lower plate will be welded with ms angle iron frame of 25mm x 25mm x 5mm. the angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 swg sheet tubes posts duly embedded in cement concrete m-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. the top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 swg steel plate tube. all m.s. will be stove enameled on both sides. lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. all sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing clause 1701 and annexure 1700.1 of mord and as per direction of the engineer-in-charge, providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per irc:35 .the finished surface to be level, uniform and free from streaks and holes and as per direction of the engineer-in-charge.

Central Government/Public Sector

TRN :20862632 | 19 May, 2021

Tender Value : 0

Pasighat - Arunachal Pradesh

Tender for requirement supply of spare parts oil seal main shaft double lip oil seal drive shaft kit brake lining consist of two lining leading, tow lining trailing, rivet 44 nos bush ball -seat gear shift lever o ring 28x3 a nitrile ts 16222 rubber bellow retainer plate input shaft seal kit steering tandem master cyl dia 23.81 pre filter insert rubber hose-21 od vaccum pump oil sump collar bush shift link needle cage 2nd/3rd speed needle cage 1st/2nd speed assy 2nd gear needle cage od gear main shaft synchrocone 1/rev.gear synchrocone3rd/d/shaft double lip oil seal extension arm engaging gear 1st/2nd. rev/od speed compression spring ball 5 dia grade-20 is 2898 carrier 1/2 & r/od & 3/4 detent spring rev/o.d shifter shaft nut pinion

Central Government/Public Sector

TRN :20862885 | 24 May, 2021

Tender Value : 35.95 Lacs

Jharsuguda - Orissa

Tender for supply of cabin kit kit cabin items without ac, as per part no-953rcb0143. as per tps. cabin fan, as per part no-885200000166. as per tps. fip eg assy, as per part no-51z7105522. as per tps. for bh100 t dumper and spares of bd355 dozer.

Central Government/Public Sector

TRN :20853425 | 22 May, 2021

Tender Value : 20.54 Lacs

North 24 Paragana - West Bengal

Tender for supply of d80/bd80, cat part no 10z7180157 hose, fuelfig- 4110/09, cat part no 31z2140156 cylinder liner b type, cat part no 30z7180409 nozzle for fuel injector, cat part no 30z3100495 bearing, crnkpin, stdsp, 1pr, cat part no 1420206016 sealing ring, cat part no 2440520022 feed pump plunger, cat part no 9411038578 delivery valve assembly, cat part no 30z7180563 shim, 0700 mm, cat part no 30z3100284 bearing, thrust, std, assy, cat part no 30z7180603 shim, 0800 mm, cat part no 1410282015 oil seal, cat part no 31z1280122 wing nut, cat part no 30z7180911 connector, inlet, cat part no 30z3100243 bearing, main std1 engset, cat part no 31z990031301/ 31z9900313 cylinder block gasket kit, cat part no 2912732203 screw-lower, cat part no 2911062193 hexagon screw, cat part no cpf0600812 gasket/seal oil, cat part no 30z7181065 gasket, cat part no 30z990048701 water pump service kit, cat part no 31z1280139 inner element, cat part no 30z7130245 tube, cat part no m2443203001 valve ispl 497tc -feed pump, cat part no 31z1280155 element outer, air cleaner, cat part no 30z5130777 tube, outlet, cat part no cfl0215220 snap ring, at part no 116mc61341/ 1411011451 plate, cat part no 110tf91181 seat grease filler/lubricator, cat part no chh2101003 hose, cat part no cet0401175/ 070204001000 terminal+ ve ispl fig-19a, cat part no 71005200050 water temp guagefig-1055, cat part no cek0110000 switch startingfig-1055, cat part no 524300450001 element filter, cat part no 125fl02002/ 1540412530 strainer/bottom screen filter, cat part no 116hs91784/ 1546012170 element filter ctlg fig-61, cat part no 116tf91568 gasket bd80, fig no-4025, sl no-23, cat part no 158139/166554 element, lub oil filterprice list 2002, cat part no 110848 element lub oil cooler, cat part no 3873576 element super to by pass filter ms sl-69

Central Government/Public Sector

TRN :20855414 | 28 May, 2021

Tender Value : 43.06 Lacs

Sonebhadra - Uttar Pradesh

Tender for supply of lubrication spares grease pump assy ; as per part no: 55562 for use in mk30b unit rig 120te dumpers cyle timer ; as per part no: 55564, alternate part no 1452707, 244270 for use mk30b unit rig 120te dumpers nipple ; as per part no. 1014046 and alternate part no-014727 for use mk30b unit rig 120te dumpers rod piston ; as per part no. 1013882 for use mk30b unit rig 120te dumpers copper washergasket ; as per part no. 1020247 for use mk30b unit rig 120te dumpers gland packing nut ; as per part no. 701682 for use mk30b unit rig 120te dumpers u-cup ; as per part no. 2002432 for use mk30b unit rig 120te dumpers plunger rod ; as per part no. 701669 for use mk30b unit rig 120te dumpers gland gasket ; as per part no. 701677 for use mk30b unit rig 120te dumpers gland packing washer ; as per part no. 701679 for use mk30b unit rig 120te dumpers piston rod ; as per part no. 701987 for use mk30b unit rig 120te dumpers plunger adapter ; as per part no. 2001277 for use mk30b unit rig 120te dumpers valve assembly ; as per part no. 2001280 for use mk30b unit rig 120te dumpers coupling nut ; as per part no. 2001281 for use mk30b unit rig 120te dumpers solenoid coil ; as per part no. 2001288 for use mk30b unit rig 120te dumpers priming check ; as per part no. 701665 for use mk30b unit rig 120te dumpers u cup packing ; as per part no. 701674 for use mk30b unit rig 120te dumpers gland packing ; as per part no. 701678 for use mk30b unit rig 120te dumpers valve seat ; as per part no. 701716 for use mk30b unit rig 120te dumpers needle ; as per part no. 701717 for use mk30b unit rig 120te dumpers check seat ; as per part no. 701984 for use mk30b unit rig 120te dumpers hose ; as per part no. 2002433 and alternate part no-091268 for use mk30b unit rig 120te dumpers seal kit ; as per part no. 2003748 for use mk30b unit rig 120te dumpers priming check seat ; as per part no.701664 for use mk30b unit rig 120te dumpers fitting ; as per part no. 16094 for use mk30b unit rig 120te dumpers coupling nut ; as per part no. 2001278 for use mk30b unit rig 120te dumpers coupling stud ; as per part no. 2001279 for use mk30b unit rig 120te dumpers pressure reducing valve ; as per part no. 2001289 for use mk30b unit rig 120te dumpers hydraulic cylinder ; as per part no.2001284 and alternate part no 241814 for use mk30b unit rig 120te dumpers solenoid connector see item 63 ; as per part no.2001291 and alternate part no-242209 for use mk30b unit rig 120te dumpers adapter ; as per part no. 1013716 for use mk30b unit rig 120te dumpers outlet check assembly ; as per part no. 1028474 and alternate part no 081938/081932/081938 for use mk30b unit rig 120te dumpers time delay relay ; as per part no. 55937 for use mk30b unit rig 120te dumpers of ur mk 30b 120t dumper

corporations/Associations/Others

TRN :20844310 | 18 May, 2021

Tender Value : 0

Channapatna - Karnataka

Tender for auction sale of scrap - scrapped waste oil with barrel, scrapped ms barrel, scrapped corrugated box and cartons, scrapped kraft paper bags with plastic liner 25kg cap, scrapped plastic carbouys 200 ltr, scrapped plastic carbouys 70ltr, scrapped plastic carbouys 35ltr, scrapped plastic carbouys different capacity

Central Government/Public Sector

TRN :20846235 | 24 May, 2021

Tender Value : 3.85 Lacs

Pasighat - Arunachal Pradesh

Tender for supply of cat a spares 29844 assy rear shockobsrber 0802ca0851n clutch release bearing 091148 assy prop shaft front 027515 - circlip lower ball joint 098313 oil seal, axle shaft 000a866 nut, retaining, wheel bearing 0502ca0080n oil seal hub front 0083149 outer wheel brg cone 0083150 outer wheel brg cup 0083151 inner wheel brg cone 0083152 inner wheel brg cup 0080149 nyloc nut 0028418 wiper blade assy 0088631 rear view mirror-lh 17000a0060n bulb hl 12v 55/60 w 9420000073/0303bc0071nmtbl oil filter cartridge oe 0502ca0220n bearing 0703bc0010n oil seal, output shaft auxlary g/box 0503ca0211n seal pinion front axle 0502ca0180n oil seal axle shaft outer 912593 bush pivot end 04030a0050n bushing 097932 spring pivot pin 070175 bushing shock absorber eye 079759 shackle front 079756 rear spring shackle bushing 074048 clip spring u bolt repair 1103aa0130n/0084850 master tie rod assy 4 wd 084852 assembly connecting tie rod 084841 bushing stabilizer bar 0703bc0010n oil seal, gear box 0502ca0131n seal pinion rear axle 097964 bushing, stabilizar bar 0603ba0441n caliper assembly - lh 0603ba0451n caliper assembly - rh 093165 insulator, transfer case mtg 84777 spring bush 080149 nylock nut g 12.70 mm 1/2-20 029725 assembly front spring complete 029726 assembly rear spring complete 38166/0381665 kit universal joint 099998 shock absorber assy, steering dumper 000a865 thar lock washer wheel bearing 00194061 bearing front wheel 089517 clip spring front u bolt 097946 axle bumper 089332 anti rattle clip 027527 front axle shaft universal -lh 027528 front axle shaft universal -rh sf0302020 nut nylon spring pivot pin 089674 assy flaxiable cable 4wd 0606aa127n brake master cylinder assy 0091971/0091970 starter assy lucas/mico 1701aa2071n head lamp assy lh 1701aa2081n head lamp assy rh 1703aa0701n assy rear combination lh 1703aa0691n assy rear combination rh 0501aa1121n prop shaft rear 0501aa1641n prop shaft 4wd front 9420000073 oil filter cartridge 0306dg0021n belt alternator 31133 wheel cylinder assy rr 0603ba0571n caliper assy lh 0313ac0280n filter element assy 1302aa0110n assy speedometer cable 0606aa1261n master cylinder assy 084777 spring bushing 0401ba1570n kit front suspension consist of: 028869 bush stabiliser bar front 084818 assy front spring 089943 assy rear leaf spring 038166 kit universal joint journal 0028418 wiper blade 26925304 starter assy lucas 0801ca0030n clutch cover assy nef tc 0801ba0161n clutch driven plate assy 6508212 lock washer spring m8 3108224 scr hex hd m8x1.25-20 0602aab00330n drum rear brake 0602bab06390n kit lined shoe assy w/o hand brake 0603bab02850n kit pad assy 0501caa00171n universal joint 1104aaa04070n shaft assy intermediate upper 1104aaa04100n shaft assy intermediate lower 0303bc0071n mobil oil filter 0401baa0032kt kit front suspension 0305dab0901n fuel filter 0313ac2261n air cleaner filter 1104aaa04050n steering column crash for m/bolero, camper and scarpio only for oem authorised dealer of mahindra and mahindra

Central Government And Public Sector

TRN :20847368 | 24 May, 2021

Tender Value : 0

Allahabad - Uttar Pradesh

Tender for procurement of spares s/r:deflector pulley :nd1 :without plummer block: drg no. 015m0019 s/r:uplift pulley :nd4 :without plummer block: drg no. 015m0019 s/r: pin drg. no. 52240114: make-trf s/r: lifting pl arrangement for bucket wheel chute : drg no. 22210071 without cylinder: make-trf s/r: draw bar pin assembly: drg no. 21030011, make -trf s/r: dia 630 trailing wheel assembly: drg no. 40530027, make -trf s/r: plummer blockassylocated, drg no. 42130031 s/r: plummer blockassyfree, drg no. 42130032 s/r: bearing blockassylocated, drg no. 42130029 s/r: bearing blockassyfree, drg no. 42130030 s/r: screw takeup assembly, drg no. 42110012 s/r: tension spring, drg no. 52140104 s/r: primary ext scraper, 1600mm bw poly blade s/r: ex belt scraper secondaryprimary ext scraper, -1600 s/r: internal scraper assy, drg no. 42110013, make -trf s/r: internal scraper assy, drg no. 42110014, make -trf s/r: scraper holding braket, drg no. 52130082, make -trf s/r: plummer block : snh518- 615+tsna615s+asnh518- 615+frb s/r: plummer block : snh518- 615+tsna615s+asnh518- 615free s/r:snh615ts+2frb5/160+a snh 518-615n s/r:snh615ts+asnh 518- 615n s/r: bull dog grip fxgx8 is:2361 s/r: torque arm, drg no. 52240057 s/r: ring drg no. 52240058 s/r: spacer drg no. 52240059, make -trf s/r: pin drg no. 52240060 s/r: circlip 105x4n, is:3075part 2 s/r: pin drg no. 912400010 s/r:adaptor, drg no. 52340006, make -trf s/r: ring, drg no. 52340006 s/r: hinge pin, drg no. 52240115, make -trf s/r: draw bar: drg no. 61020014, make -trf s/r: dia200 brake drum, drg no. 50540047 s/r: geared coupling, torque rating 5.07kgm s/r: manual rail clamp assy m/c, drg no. 21310014 s/r: manual rail clamp assy trip, drg no. 21310015 of stacker and reclaimer

Related Sub Industries : Automobiles Ancillaries

List of latest automobile-ancillaries Tenders in Indian Tenders. Click on any automobile-ancillaries Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for automobile-ancillaries Tenders.

Tender for supply of cabin kit kit cabin items without ac, as per part no-953rcb0143. as per tps. cabin fan, as per part no-885200000166. as per tps. fip eg assy, as per part no-51z7105522. as per tps. for bh100 t dumper and spares of bd355 dozer.

Get Automobile Ancillaries Tender Alert...

Related Sub Industries : Automobiles Ancillaries

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us