Filters

List of latest bearing Tenders in Indian Tenders. Click on any bearing Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for bearing Tenders.

All-Tenders (147)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :20853340 | 31 May, 2021

Tender Value : 0

Karur - Tamil Nadu

Tender for leasing of fruit bearing trees of plantation area, guest house, housing colony and factory area of tnpl unit-2 on two years contract basis

Central Government/Public Sector

TRN :20853427 | 07 Jun, 2021

Tender Value : 0

Jaduguda - Jharkhand

Tender for supply of taper roller bearing 522 / 529

Central Government/Public Sector

TRN :20854645 | 18 May, 2021

Tender Value : 0

North 24 Paragana - West Bengal

Tender for supply of spare parts - bolt part no 348606p29 bolt m 6x12 issue inlieu 201418p29 part no 201416p29 bolt m14x50 part no 205482p29 bracket pad part no 2558403210 breather part no 2361702170a bushing part no 2361701135 cap part no 236v1702133 cover gasket part no 2144501046 elastic resilient part no 255b2806030 end seal bearing part no 255b2201036 feed hose part no 255b3408064b fender bumperpad bkt part no 2568403210 flange gasket part no 2002403048b gasket part no 500a3405276 gasket part no 500a3405132 gasket part no 2361701042a gasket part no krz2001701021a gasket part no 2361702014 gasket part no 2361702122 gasket part no 214b1802015 gasket part no 2101802017 gasket part no 2101802021a gasket part no 2101802029 gasket part no 255b1802215 gasket part no 255b8500048 gasket part no 2361704056a gasket part no 345055p gasket part no 256b6800230 gasket cover part no 210a420208701 gasket flange axle s haft part no 255b2303048 gasket seal winch reduction gear b/c part no 2144501157 gland ring part no 2101803048a gland ring/ring oil part no 2101803048a gland/coller part no 2361701230 gland/oil seal part no 2101701210a gland/oil seal ball pin part no 2003003078a hose assy adopter part no 255b4224190b hose delivery part no 255b340806003 housing gasket part no 2222402034 key wood ruff part no 260415p2 lock nut part no 256b3104093 lock plate part no 512201039 nut part no 250688n29 oil seal steering gear warm sector part no 2003401025 packing pin part no 5033405178b packing ring part no 2002201088 pad part no 256b1001008 plate locking part no 255b3104094 seal part no 256b3405178 seal tank cover part no 256b3410129 sealing ring part no 2361109045a shoe lining part no 513502105 washer part no 312581p29 washer part no 345056p29 bolt wheel attachment255b-3104008 part no 255b3104008a air pipe assy part no 214b3506301a2 battery connector jumper battery part no 255b3724059 charge body chain/chain platform body part no 2148506350 drop glass part no 214b6103214 muffler part no 255v1201010b oil pressure gauge md103 part no md1033816010 pipe assy from air cyl to manual c/valve part no 255b13506255 pipe assy from anti freeze evaporator to part no 255b1350620710 pipe assy manual control cock part no 2503506224 pipe brake pipe balance spring w/adj part no 200351414b pipe for branching air to lh wheel of ia part no 255b3125175 rod air cleaner part no 20g1109124 sheild part no 255b3507062v1 single safety valve part no 1003515010 support lever part no 236u1702121b valve assembly, towing part no 2103525010a wind sheild assy part no 255b5200012 for kraz veh

Central Government/Public Sector

TRN :20854672 | 19 May, 2021

Tender Value : 0

North 24 Paragana - West Bengal

Tender for supply of spare parts - gasket fly wheel housing part no 371487 main bearing 1, 2, 3, 5, 6, 7 std. 101.6 part no 279600 main bearing 4 std. 101, 62mm part no 279610 oil pressure sensor part no 373811374338 over flow valve part no 313969 plug m20 part no 812375 smoke eliminator part no 374484220457 tube part no 395200 tube part no 389760 tube part no 321464 valve cover part no 305976 washer part no 802998 water pump part no 1314406292761 water temp monitor part no 371081 for scania veh

Central Government/Public Sector

TRN :20854749 | 18 May, 2021

Tender Value : 0

Paradip - Orissa

Tender for supply of w-5 routine spares thermal actuator union thrust washer bearing body bearing bushing snap ring for icgs sarojini naidu

Central Government/Public Sector

TRN :20854813 | 18 May, 2021

Tender Value : 0

Paradip - Orissa

Tender for supply of w-5 routine spares gaiter repair kit spring pin drain valve sealing flange bearing bushing o- ring for icgs sarojini naidu

Central Government / Public Sector

TRN :20854899 | 18 May, 2021

Tender Value : 0

Haldia - West Bengal

Tender for supply of spares of 18-pt-02b drive steam bearing liner p/n:412169-1 rotor locating bearing p/n:50 seal sleeve p/n:47 sentinel valve p/n:61 rotor assembly, 666941-204 cap scrw, pkg case vertical, p/n: 7 dowel, p/n: 25 carbon ring-53 p/n:634159-54 jam nut, valve stem, p/n: 33 lantern ring, p/n: 20 trip body, p/n: 52 machine screw, p/n: 10 connection t governor, p/n: 32 connection pin, p/n: 50 cap scrw, pkg case horizontal, p/n: 8 machine bolt bearing caps, p/n: 13 spacer, p/n: 24 machine bolt cover, cyr, p/n: 4 rod end with jam nut, p/n: 14, 16 terminal shaft, p/n 17 elastic stop nut, p/n: 19 shoulder screw, p/n:13 connecting rod, p/n: 15 pin p/n:11 pin p/n:7 roll pin, knife edge p/n:43 coupling p/n:6 shoulder stud, p/n: 29 housing, bearing p/n:659375-17 bearing case assy p/n:710648-11 carbon ring assembly, p/n 9

corporations/Associations/Others

TRN :20855311 | 26 May, 2021

Tender Value : 0

Hyderabad - Telangana

Tender for creation of infrastructural facilities construction repairs and renovation works at the english and foreign languages university campus supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 1 cement : 1.5 coarse sandzone-iii : 3 graded stone aggregate 20 mm nominal size. centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platform lintels, beams, plinth beams, girders, bressumers and cantilevers columns, pillars, piers, abutments, posts and struts stairs, excluding landings except spiral-staircases providing, hoisting and fixing up to floor five level precast reinforced cement concrete in small lintels not exceeding 1.5m clear span up to floor five level, including the cost of required centering, shuttering but, excluding the cost of reinforcement, with 1:1.5:3 1 cement : 1.5 coarse sandzone- iii : 3 graded stone aggregate 20 mm nominal size providing and laying in position machine batched and machine mixed design mix m-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per is: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer-in-charge note :- cement content considered in this item is @ 330 kg/cum. excess/ less cement used as per design mix is payable/recoverable separately. all works above plinth level upto floor v level brick work with common burnt clay f.p.s. non modular bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in : cement mortar 1:6 1 cement : 6 coarse sand providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix 1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size. providing and fixing isi marked oxidised m.s. tower bolt black finish, barrel type with necessary screws etc. complete 200x10 mm providing and fixing isi marked oxidised m.s. handles conforming to is:4992 with necessary screws etc. complete 100 mm providing and fixing factory made upvc white colour fixed glazed windows/ventilators comprising of upvc multi-chambered frame and mullion where ever required extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length shape & size according to upvc profile, upvc extruded glazing beads of appropriate dimension, epdm gasket, g.i fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. profile of frame shall be mitred cut and fusion welded at all corners, mullion if required shall be also fusion welded including drilling of holes for fixing hardwares and drainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of engineer-in-charge. single / double glass panes and silicon sealant shall be paid separately. note: for upvc frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. fixed window / ventilator made of small series frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. area upto 0.75 sqm. supplying and fixing rolling shutters of approved make, made of required size m.s. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to is: 4454 - part 1 and m.s. top cover of required thickness for rolling shutters. 80x1.25 mm m.s. laths with 1.25 mm thick top cover providing and fixing ball bearing for rolling shutters. extra for providing mechanical device chain and crank operation for operating rolling shutters exceeding 10.00 sqm and upto 16.80 sqm in the area providing and fixing m.s. fan clamp type i or ii of 16 mm dia m.s. bar, bent to shape with hooked ends in r.c.c. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete. providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. m.s. tube unit weight is considered as per the drawing fixing glazed/ ceramic/ vitrified floor tiles with cement based high polymer modified quick-set tile adhesive water based conforming to is: 15477, in average 3mm thickness providing and laying vitrified tiles in different sizes thickness to be specified by manufacturer, with water absorption less than 0.08 % and conforming to i.s. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 1 cement: 3 coarse sand, jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. size of tile 600x600 mm providing and fixing on wall face unplasticised - pvc moulded fittings/accessories for unplasticised - rigid pvc rain water pipes conforming to is : 13592 type a including jointing with seal ring conforming to is : 5382 leaving 10 mm gap for thermal expansion. coupler 75mm 110 mm single pushfit coupler: 75mm 110 mm single tee with door 75x75x75mm 110x110x110 mm single tee without door 75x75x75mm 110x110x110 mm bend 87.50 75mm bend 6 mm cement plaster 1:3 1 cement : 3 fine sand finished with a floating coat of neat cement and thick coat of lime wash on top of walls when dry for bearing of r.c.c. slabs and beams. distempering with 1st quality acrylic distemper ready mixed having voc content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification. two or more coats on new work finishing walls with acrylic smooth exterior paint of required shade : new work two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work dismantling of flexible pavement bituminous courses by mechanical means and disposal of dismantled material up to a lead of 1 kilometre, as per direction of engineer-in-charge providing, laying, spreading and compacting graded stone aggregate size range 53 mm to 0.075 mm to wet mix macadam wmm specification including premixing the material with water at omc in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of engineer-in-charge. constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 1 cement : 4 coarse sand including 500x450 mm pre-cast r.c.c. horizontal grating with frame complete as per standard design : with common burnt clay f.p.s. non modular bricks of class designation 7.5 providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by engineer-in-charge and consisting of : i ist layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 1 cement : 3 coarse sand mixed with water proofing compound conforming to is:2645 in the recommended proportion over the leveling course leveling course to be paid separately. joints sealed and grouted with cement slurry mixed with water proofing compound. ii 2nd layer of 25 mm thick cement mortar 1:3 1 cement: 3 coarse sand mixed with water proofing compound in recommended proportions. iii finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer. using rough kota stone. providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to is:2645 in recommended proportions with a gap of 20 mm minimum between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 1 cement : 3 coarse sand 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by engineer-in-charge : using rough kota stone electrical items. wiring for circuit/ submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required. 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire 2 x 4 sq. mm + 1 x 4 sq. mm earth wire 2 x 6 sq. mm + 1 x 6 sq. mm earth wire 2 x 10 sq. mm + 1 x 6 sq. mm earth wire supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. single pole supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm supplying and fixing following size/ modules, gi box alongwith modular base & cover plate for modular switches in recess etc. as required. 3 module 100mmx75mm 8 module 125mmx125mm 12 module 200mmx150mm supplying and fixing 3 pin, 5 a ceiling rose on the existing junction box/ wooden block including connections etc. as required. installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm frls pvc insulated, copper conductor, single core cable and earthing etc. as required. installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length upto 30 cm with 1.5 sq. mm frls pvc insulated, copper conductor, single core cable etc. as required. installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. upto 450 mm sweep supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. but without mcb/rccb/isolator 6 way, double door supplying and fixing single pole blanking plate in the existing mcb db complete etc. as required. supplying and fixing following rating, four pole, 415 v, isolator in the existing mcb db complete with connections, testing and commissioning etc. as required 63 a laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. upto 35 sq. mm above 185 sq. mm and upto 400 sq. mm supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required. 4 x 16 sq. mm 28mm excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres. providing and laying in position cement concrete 1:3:6 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size in foundation of pump, dg set etc including form work etc as required providing and laying in position reinforced cement concrete 1:2:4 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size in foundation of pump, dg set etc including form work etc as required excluding reinforcement. installation, testing and commissioning of pre-wired, 2 feet 15w led light fixture on wall / ceiling as per the engineer in charge, including connetion with 1.5 sq.mm fr pvc insulated, copper conductor, single core cable and earthing etc. as required. supply of 18 w indoor decorative surface mounted luminaire with 1 nos. 18w led of length 4 feet tube light, supply of 15 w indoor decorative surface mounted mirror luminaire with 1 nos. 10w led of length 2 feet tube light, supply of 48 1200mm sweep 5 star rated bldc brush less direct current ceiling fan with double ball bearings, input voltage 230v ac converted to 24 v dc, power input not more than 32w, air delivery 210/220 cubic meter/min with remote and without regulator. supply of 9 225mm, light duty exhaust fan with double ball bearing and wire guard etc complete. supply, installation, testing and commissioning of k-lite id no: kl 4226 jado stone bollard 12w led ww dim: 200x110x1000mm color : graphite grey including accessories supply, installation, testing and commissioning of k-lite id no: kl 4823 sleek bollard flat top translucent 8w led ww dim: 100dia x 1005mm color : graphite grey supply, installation, testing and commissioning of k-lite id no: 5368 tagalog 50w led ww dim: 465x5505120mm k-lite id no: kp-4792 flat lighting poles 139.7 dia x 76.1dia x 4270mm color : black, kp: 4792 foundation bolt for 4 nos fb with 2 nuts & 2 washer m16 x 300mm color : black supply, installation, testing and commissioning of k-lite id no: kl- 5040 juno 60w led ww dim: d2 600 dia x 422mm color : black, k-lite id no: kp-4792 flat lighting poles 139.7 dia x 76.1dia x 4270mm color : black, kp: 4792 foundation bolt for 4 nos fb with 2 nuts & 2 washer m16 x 300mm color : black removing and replacing of k-lite id no: kp - 4294 amy 50w led ww dim: d6 377 x 148 x 51mm supply, loading, transportation unloading at site, storages at site, shifting from storage place to site of following sizes of xlpe insulated pvc inner sheathed, frls outer sheathed, aluminium conductor armoured power cable of 1.1 kv grade conforming to is amended upto date and as per specifications. 4 c x 16 sqmm xlpe cable supply of pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following sizes 4c x 6 sqmm aluminium armoured cable 2c x 6 sqmm aluminium armoured cable

State Government

TRN :20855562 | 19 May, 2021

Tender Value : 0

Srinagar - Jammu And Kashmir

Tender for annual stage contract for repairs, replacements of damaged, worn out spare parts providing/fitting of piston with pin and clips providing/fitting of piston ring set providing/fitting of connecting rod bush providing/fitting of connecting rod bolt providing/fitting of oil pump assembly providing/fitting of water body complete assembly providing/fitting of m.oil plug providing/fitting of temperature plug providing/fitting of gasket unit providing/fitting of head gasket providing /fitting of timing chain with adjuster providing/fitting of water body pulley providing/fitting of water body gasket providing/fitting diesel filter assembly providing/fitting diesel filter set providing/fitting m oil filter providing/fitting air filter providing/fitting diesel pipe set providing/fitting accelerator cable fuel injection pump overhauling with nozels providing/fitting fuel injector pipe providing/fitting main diesel pipe providing/fitting fuel return pipe providing/fitting of engine mounting m.oil change with departmental oil repairs to radiator cleaning and leakage arresting providing/fitting radiator foundation bolt providing/fitting radiator assembly complete providing/fitting turbo charger kit clutch system dismantling /fitting of clutch system replacement of clutch plate replacement of pressure plate replacement of flywheel ring replacement of clutch release bearing replacement of clutch oil seal replacement of clutch cable replacement of clutch paddle spring replacement of clutch paddle bush suspension system dismantling/fitting of suspension system providing/fitting of front wheel inner bearing providing/fitting of front wheel outer bearing providing/fitting of front wheel oil seal providing/fitting of steering tie rod end providing/fitting of steering centre pin bush providing/fitting of steering ball joint providing/fitting of steering column rod providing/fitting of steering bolt replacement of power steering complete including steering gearbox replacement of complete suspension bush kit replacement of master cylinder kit replacement of complete master cylinder assembly replacement of hand brake cable providing /fitting of brake pipe replacement of rear brake shoe set set of 2 pieces replacement of rear brake wheel cylinder replacement of rear wheel bearing replacement of disc pad set replacement of caliper set replacement of axle front / rear replacement of rear wheel bearing replacement of axle bearing replacement of axle sleeve replacement of axle nut providing/fitting of brake vacuum diaphragm replacement of wheel hub bolt providing/filling of brake fluid providing/fitting of disc rotor gear box repairs to 4x4 gear system replacement of 4x4 gear dismantling and fitting of gear box replacement of speedometer gear replacement of speedometer cable replacement of uj cross replacement of uj cross bolt replacement of centre bearing and rubber all oil change oil provided departmently replacement of gear box oil seal main drive shaft counter shaft 1st speed gear 2nd speed gear 3rd speed gear 4th speed gear 5th speed gear reverse gear gear box sleeve set gear box roller bearing. gear box oil seal set top cover gear box lever gear box housing bolt gear box housing gear oil up to required level silencer replacement of silencer assembly complete replacement of silencer tail pipe replacement of silencer gasket replacement of silencer bracket replacement of silencer bolt electrical system dismantling and fitting of alternator assembly replacement of alternator pulley replacement of alternator cut out replacement of alternator rectifier plate replacement of alternator bearing replacement of alternator armature replacement of alternator brush set replacement of fan belt dismantling and fitting of self starter assembly replacement of self armature replacement of self bush replacement of self bearing replacement of solenoid switch replacement of battery lead set replacement of battery replacement of battery terminal and thimbles providing and fitting of combination switch dismantling and fitting of dash board replacement of damaged electrical wiring complete providing and fitting of ignition /door lock set replacement of fuel meter, replacement of temperature meter replacement of odometer replacement of dash bulb replacement of oil pressure meter replacement of head light assembly replacement of side indicator assembly replacement of back light assembly replacement of horn assembly replacement of back light glass replacement of back light bulb replacement of head light bulb replacement of side indicator bulb replacement of horn relay / horn replacement of wiper blade set replacement of wiper machine complete replacement of wiper arm body side replacement of door handle outside replacement of door handle inside replacement of door trim replacement of door glass sliding handle replacement of door lock replacement of side mirror welding/denting/painting of various spots on the body denting/painting bumper front/rear replacement of bumper front/rear complete flooring of the load body by way of providing and fitting of ms chequered sheet 3mm thick and painting. leaf springs rear dismantling/fitting of leaf springs rear replacement of main leaf spring rear replacement of 1st leaf spring rear replacement of 2nd leaf spring rear replacement of 3rd leaf spring rear replacement of 4th leaf spring rear replacement of 5th leaf spring rear replacement of leaf spring bush rear replacement of leaf spring u bolts rear replacement of leaf spring centre bolt rear shakel pin/bolt rear replacement of leaf spring clip with bolt rear tyres replacement of front tyre of required size of make mrf/goodyear/bridge stone/ceat/jk. replacement of rear tyre required size of make mrf/goodyear/bridge stone/ceat/jk. wheel alignment diesel tank dismantling/fitting /cleaning/repairing of diesel tank replacement of tank fuel float meter steering system power steering motor power stg. repair kit hydraulic pipes steering. assembly steering bearing. steering. cross steering. shaft wheel alignment sensors cam sensor dynamo sensor ignition sensor differential crown wheel pinion with nut pinion bearing. kit complete diff. cage diff. stud washer big /small diff. joint main oil seal gear oil up to required level axle new u-j cross cross holder coupling yoke and teeth front teeth central bearing. central bearing. assembly complete shaft bolts with nuts and washer. of departmental tata xenon, pickup.

Central Government/Public Sector

TRN :20857169 | 03 Jun, 2021

Tender Value : 10.82 Lacs

Bilaspur - Chhattisgarh

Tender for supply of bush part no: mbh50/60/50a, bushbucketchain ` part no: eea0018390, link pin part no: 625a000003261, hex nut, nyloc part no: mt10ln, flat washer part no: maw10gg, seal kitpush cylinder part no: eea0015174, spherical bearing part no: eea0015164, bearing part no: g438/g443, hex head bolt/cage part no: 370-0404, hex head bolt/collar part no: 370-0807, life time gasket old part no: eea0004975, shaft seal ring part no: eea0009364, limit switch part no: 625b040000129, bonded seal part no: sc011/016, bonded seal pat no: sc011/024, bonded seal part no: sc011/026, elbow part no: se012/024, elbow part no: se012/022, reducer, m/m part no: se012/106

Related Sub Industries : Ball Bearings

List of latest bearing Tenders in Indian Tenders. Click on any bearing Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for bearing Tenders.

Tender for leasing of fruit bearing trees of plantation area, guest house, housing colony and factory area of tnpl unit-2 on two years contract basis

Tender for supply of taper roller bearing 522 / 529

Tender for supply of w-5 routine spares thermal actuator union thrust washer bearing body bearing bushing snap ring for icgs sarojini naidu

Tender for supply of w-5 routine spares gaiter repair kit spring pin drain valve sealing flange bearing bushing o- ring for icgs sarojini naidu

Get Bearing Tender Alert...

Related Sub Industries : Ball Bearings

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us