Notice Inviting Tender (NIT) by the Central Government And Public Sector Of India for Gem Bids For Led Flood Light Fitting 200 Watt, Beam Angle 90degree ,surge Protection 10kv Operating Voltage And Frequency Range-140v To 280 Vat 50 Hz Ac, Ac Power Factor->/=0.90 Color Temperature(+/- 500 K)- 5000 To 7000 Deg. K, Ip65, Led Efficacy Minimum 120 Lm/watt, Led Chip Shall Be Used In The Luminaire Of Nichia/cree/osram/seoul/ Philipslumileds/lednium/avago Make, Hss Twist Drill, Morse Taper Shank Dia 17.50mm Of Designation Twist Drill 17.50 Is 5103 Hs Conforming To Is 5103:1969 With Amendment No 3 Of December 1996 Make: Jk/addison/miranda/it Only, Impact Wrench As Per Detailed Technical Specification : 1) Power Input Watt: 850 Or Better, 2) Elctronic Impact Power Selection: Single Stage (fixed Power), 3) No Load Speed Rpm: 0-900, 4) Sound Pressure Level (dba): <= 110, 5) Square Drive Inch: 1, 6) Carrying Case Inclusive In Scope Of Supply: Yes, 7) Maximum Fastening Torque N/m: 1000 Or Better, 8) Tool Type: Corded, 9) Vibration Level M/s2 : <= 20, 10) Power Source: Plug-in Type Electric Motor, 11) Impact Per Minute (ipm): Hard / Soft: 0 - 3600 / 0 - 2000 Or Better, 12) Nutbusting Torque N/m: 2050, 13) Electronic Speed Selection: Fixed, 14) Standard Bolt: M12-m30, 15) Power Cord Length: 2.5, 16) High Strength Bolt: M10-27, 17) Additional Features: Protection From Dust And Dripping Water Is Enchanced, Forward And Reverse Rotation Auto Stop Mode, Supply Of Tyre & Tube As A Set For Material Handling Road Vehicle (bolero Camper Of Mahindra & Mahindra), Tyre Size : 235/75 R15 (105s) Steel Belted Pneumatic Radial Tyre. Make- Mrf Or Ceat Or Bridgestone Or Goodyear Or Jk Tyre Or Equivalent Reputed Make Only. Note- 01 Set Consists Of 02 Items I.e. 01 No. Each Tyre & Suitable Tube, The Contractor Shall Have To Supply, Testing Energy Efficient Horizontal Submersible Pump Set Complete With All Accessories Suitable For Sump. The Pump Set Shall Be 12.5 Hp, 415v, 3 Phases; 50 Hz Ac. Submersible Mono Block Pump Should Be 3 Star Rated, Heaving Discharge Head Of 38-42 Mtr., With Discharge Rate Of 650-750 Lpm Complete With All Reducer & Coupling Delivery Pipe Connection Etc. The All Pumps Components Should Be Of: - 1. Pump Casing And Components Of Closed Grain Cast Iron. 2. Impellers Of Stainless Steel (ss) Or Cast Iron And Shall Be Either Totally Enclosed Or Semi Enclosed Type And Shall Be Dynamically Balanced. 3. Pump And Motor Shaft, Shaft Sleeves, Pump And Motor Couplings Pivot And Thrust Pad Should Be Stainless Steel. 4. Water Lubricating Bearings Of Bronze. 5. Motor Casing Of Cast Iron, Stator And Casing Protected Against Corrosion By A Firmly Adhesive Coating Of Rust Preventive Paint. 6. Stator Winding Of Copper With Weatherproof Non-hygroscopic, Non-aging Insulating Material (pvc Insulated/ Polypropylene Insulated). 7. Copper Rotor Dynamically Balanced With A Coating Of Rust Preventive Paint Applied On It. 8. Suction Case With Strainer. 9. Couplings. 10. Pressure Compensation Device And Rubber Device For Filling Water. The Electrical Driven Submersible Motor, Continuously, Rated Suitable For Operation On Ac 3 Phase, 415 Volts, 50 Hz. Should Be Squirrel Cage Induction Type With Winding Of Wet Type And Should Conform Strictly To Clause 6.2 Of Is: 9283 Of 2013 Or Latest. The Motor Should Be Supplied Of Suitable Capacity With Cable- 5 Mtrs. Pump Shall Be Supplied Complete With The Following Accessories, Suitable For Pump To Be Supplied Along With Pump:- 1 Non Return Valve Of Suitable Size Of Referred Pump With Flange And Gasket Conforming To Is-5312 Or Latest, With Nuts & Bolts:-1 No 2 Supporting Clamps Of Suitable Size With Flange For Column Pipe Complete With Nuts And Bolts :-2 Nos. 3 Heavy-duty 90-degree Bend With Coupling At One End And Flange At Other End. :-1 No. 4 450 Mm Long Nipple Made Up From Ms Heavyduty Pipe, Having 11 Tpi Threads At One-end 8tpi Threads At Other End:- 2 Nos, Hand Gloves Electrical -en Approved Class-4, Wp:36000 Volts, Size:10 (make: Raychem Rpg) With Specification As Per Annexure Enclosed. Make: Raychem Rpg (or) Karam (or) 3m (or) Honeywell in Rajkot - Gujarat has been published.
The last date of this tender is 11/04/2025, work value is  0 (Refer Doc) INR, EMD is  69000 INR and tender document fees is  0 (Refer Doc) INR
For more details call us on +91 92760 83333 for bidding support this tender, GeM, vendor registration (if any) and tender BOQ documents.