TheTenders
»
Tender Document : 14132487

Thank you for your interest to view the below mentioned tender. If you want to view further details, download available tender documents, require bidding support, class 3 digital signature certificate, signing and encryption, vendor registration support and much more, click Download Tender Document link.

Basic tender information about # 14132487

Inspection And Maintenance Of Welding Machines In Power Stationcomplexes.Technical Specificationlincoln Machinesthis Enquiry Is To Carry Out Periodical Inspection And Maintenance Ofwelding Machines For A Period Of One Year, To Ensure The Reliaility Andsafety The Machines As Listed Elow. The Work Performance Shall Satisfythe Local And International Standards And Regulations. Upon Completionof Periodical Inspection And Maintenance Of Welding Machine, Contractorshall Provide Detailed Inspection Report For Each Individual We Ldingmachine To Concerned Dewa Engineertechnical Details Provided With This Documents Are Very Limitedinformation To Understand The Asic Of The Welding Machines. Thecontractor Should Visit The Site And Familiarize Himself Eforesumitting Theoffer.Scope Of Work.T He Scope Of Work Includes The Following:1. Periodical Inspection And Maintenance Of Welding Machines Shall Ecarryout Every 6 Months Twice In A Year As Per Schedule Fixed Yconcerned Dewa Engineer. Responsiility Of The Contractor Against Thiscontract Is Not Limit Ed To Periodic Maintenance Of Welding Machines.Ultimate Responsiility Is To Ensure Safe & Troule Free Working Ofwelding Machine For One Year. Contractor Is Required Rectify Defects Andtake Up Immediate Repair And Testing In Consultation With Responsiledewa Enginee R Whenever It Is Required.2. All The Welding Machine Component Shall E Thoroughly Inspected Asper Relevant Standards To Ensure The Proper Functioning Of Weldingmachines. Upon Completion Of Successful Inspectionand Maintenancedetailed Inspection Report Should E F Illed-In With Relevantinformation, Oservations/Corrective Actions Required/Carried Out, Etc., And Sumitted To Dewa Duly Signed With D Ate And Company Seal Of Thecontractor.3. Carryout Repair/Replacement Of Defective Parts, Adjustments Requiredto Welding Machine Com Ponents, The Defects That Needcorrection/Repair/Adjustments Y The Contractor As Part Of Thiscontract.4. All Reakdown Maintenance Ca Ll Shall E Attended Within 24 Hrs. Ifrequired, Shall E Arranged On Holidays. In Case Contractor Failed Toattend The Reakdown Within 24 Hrs. The Third Party Will E Arranged Ydewa To Rectify The Defect Within Short Notice, An Actual Amount Willincurred For Defect Re Ctification Will E Ack Charged Tothecontractor. All The Reakdown Maintenance Call Is Part Of This Contract.There Will E No Any Addi Tional Amount Will E Compensated Y Dewa.5. All The Engine Operated Welding Machines, Engine Oil, Air Filter Andengine Filter Shall E Replaced With Genuine Parts As Per Aovescheduled, Required Luricant, Filters Shall Arranged Y Contractor Athis Own Cost.6. Contra Ctor Is Required To Provide Unit Rate For Each Individualwelding Machine As Listed Aove To Carryout Periodic Maintenance Twicein A Y Ear.7. Complete Consumales, Spare Parts, Oil Filter, Air Filter, Engineoil, Manpower, Tools, Etc. Required For Safe And Timely Exec Ution Of Thejo Shall E Arranged Y Contractor. Also Safety Of The People Workingfor Contract Is His Responsiility.General Conditions. 1. Complete Resources Includingmanpower, Materials, Tools, Tackles, Testing Instruments Etc. Required For Successful Completion Of The Jois A Part Of This Contract.2. Safety Of The Persons Working In Ehalf Is The Responsiility Ofsuccessful Idder. Contractor Shou Ld Strictly Follow Dewa Safety Andenvironment Regulations.3. The Idder Shall Have Adequate And Proven Experience In The Field Ofwel Ding Machines Maintenance.4. Contractor Required To Sumit Risk And Method Statement Prior Tostart The Jo.5. Jo Carry Out Shall Hav E Warranty For Period Of One Year From Dateof Jo Completion.6. No Welding, Flame Heating Or Cutting, Grinding Etc. Shall E Carriedo Ut Without Specific Clearance From Dewa Though #Hot Work Permits#.7. Report Duty In Proper Uniform Printed Legily With Company Logoandnormal Ppe Such As Helmet, Safety Shoe, Etc., Inspection And Maintenance Of Welding Machines In Power Stationcomplexes.Technical Specificationlincoln Machinesthis Enquiry Is To Carry Out Periodical Inspection And Maintenance Ofwelding Machines For A Period Of One Year, To Ensure The Reliaility Andsafety The Machines As Listed Elow. The Work Performance Shall Satisfythe Local And International Standards And Regulations. Upon Completionof Periodical Inspection And Maintenance Of Welding Machine, Contractorshall Provide Detailed Inspection Report For Each Individual We Ldingmachine To Concerned Dewa Engineertechnical Details Provided With This Documents Are Very Limitedinformation To Understand The Asic Of The Welding Machines.Thecontractor Should Visit The Site And Familiarize Himself Eforesumitting The Offer.Scope Of Work.T He Scope Of Work Includes The Following:1. Periodical Inspection And Maintenance Of Welding Machines Shall Ecarryout Every 6 Months Twice In A Year As Per Schedule Fixed Yconcerned Dewa Engineer. Responsiility Of The Contractor Against Thiscontract Is Not Limit Ed To Periodic Maintenance Of Welding Machines.Ultimate Responsiility Is To Ensure Safe & Troule Free Working Ofwelding Machine For One Year. Contractor Is Required Rectify Defects Andtake Up Immediate Repair And Testing In Consultation With Responsiledewa Enginee R Whenever It Is Required.2. All The Welding Machine Component Shall E Thoroughly Inspected Asper Relevant Standards To Ensure Theproper Functioning Of Weldingmachines. Upon Completion Of Successful Inspection And Maintenancedetailed Inspection Report Should E F Illed-In With Relevantinformation, Oservations/Corrective Actions Required/Carried Out, Etc., And Sumitted To Dewa Duly Signed With D Ate And Company Seal Of Thecontractor.3. Carryout Repair/Replacement Of Defective Parts, Adjustments Requiredto Welding Machine Com Ponents, The Defects That Needcorrection/Repair/Adjustments Y The Contractor As Part Of Thiscontract.4. All Reakdown Maintenance Ca Ll Shall E Attended Within 24 Hrs. Ifrequired, Shall E Arranged On Holidays. In Case Contractor Failed Toattend The Reakdown Within 24 Hrs. The Third Party Will E Arranged Ydewa To Rectify The Defect Within Short Notice, An Actual Amount Willincurred Fordefect Re Ctification Will E Ack Charged To Thecontractor. All The Reakdown Maintenance Call Is Part Of This Contract.There Will E No Any Addi Tional Amount Will E Compensated Y Dewa.5. All The Engine Operated Welding Machines, Engine Oil, Air Filter Andengine Filter Shall E Replaced With Genuine Parts As Per Aovescheduled, Required Luricant, Filters Shall Arranged Y Contractor Athis Own Cost.6. Contra Ctor Is Required To Provide Unit Rate For Each Individualwelding Machine As Listed Aove To Carryout Periodic Maintenance Twicein A Y Ear.7. Complete Consumales, Spare Parts, Oil Filter, Air Filter, Engineoil, Manpower, Tools, Etc. Required For Safe And Timely Exec Ution Of Thejo Shall E Arranged Y Contractor. Also Safety Of The People Workingfor Contract Is Hisresponsiility.General Conditions. 1. Complete Resources Including Manpower, Materials, Tools, Tackles, Testing Instruments Etc. Required For Successful Completion Of The Jois A Part Of This Contract.2. Safety Of The Persons Working In Ehalf Is The Responsiility Ofsuccessful Idder. Contractor Shou Ld Strictly Follow Dewa Safety Andenvironment Regulations.3. The Idder Shall Have Adequate And Proven Experience In The Field Ofwel Ding Machines Maintenance.4. Contractor Required To Sumit Risk And Method Statement Prior Tostart The Jo.5. Jo Carry Out Shall Hav E Warranty For Period Of One Year From Dateof Jo Completion.6. No Welding, Flame Heating Or Cutting, Grinding Etc. Shall E Carriedo Ut Without Specific Clearance From Dewa Though #Hot Work Permits#.7. Reporresponsiility.General Conditions. 1. Complete Resources Including Manpower, Materials, Tools, Tackles, Testing Instruments Etc. Required For Successful Completion Of The Jois A Part Of This Contract.2. Safety Of The Persons Working In Ehalf Is The Responsiility Ofsuccessful Idder. Contractor Shou Ld Strictly Follow Dewa Safety Andenvironment Regulations.3. The Idder Shall Have Adequate And Proven Experience In The Field Ofwel Ding Machines Maintenance.4. Contractor Required To Sumit Risk And Method Statement Prior Tostart The Jo.5. Jo Carry Out Shall Hav E Warranty For Period Of One Year From Dateof Jo Completion.6. No Welding, Flame Heating Or Cutting, Grinding Etc. Shall E Carriedo Ut Without Specific Clearance From Dewa Though #Hot Work Permits#.7. Reporduty In Proper Uniform Printed Legily With Company Logo Andnormal Ppe Such As Helmet, Safety Shoe, Etc., Inspection And Maintenance Of Welding Machines In Power Stationcomplexes.Technical Specificationlincoln Machinesthis Enquiry Is To Carry Out Periodical Inspection And Maintenance Ofwelding Machines For A Period Of One Year, To Ensure The Reliaility Andsafety The Machines As Listed Elow. The Work Performance Shall Satisfythe Local And International Standards And Regulations. Upon Completionof Periodical Inspection And Maintenance Of Welding Machine, Contractorshall Provide Detailed Inspection Report For Each Individual We Ldingmachine To Concerned Dewa Engineertechnical Details Provided With This Documents Are Verylimitedinformation To Understand The Asic Of The Welding Machines. Thecontractor Should Visit The Site And Familiarize Himself Eforesumitting The Offer.Scope Of Work.T He Scope Of Work Includes The Following:1. Periodical Inspection And Maintenance Of Welding Machines Shall Ecarryout Every 6 Months Twice In A Year As Per Schedule Fixed Yconcerned Dewa Engineer. Responsiility Of The Contractor Against Thiscontract Is Not Limit Ed To Periodic Maintenance Of Welding Machines.Ultimate Responsiility Is To Ensure Safe & Troule Free Working Ofwelding Machine For One Year. Contractor Is Required Rectify Defects Andtake Up Immediate Repair And Testing In Consultation With Responsiledewa Enginee R Whenever It Is Required.2. All The Welding Machine Component Shall Ethoroughly Inspected Asper Relevant Standards To Ensure The Proper Functioning Of Weldingmachines. Upon Completion Of Successful Inspection And Maintenancedetailed Inspection Report Should E F Illed-In With Relevantinformation, Oservations/Corrective Actions Required/Carried Out, Etc., And Sumitted To Dewa Duly Signed With D Ate And Company Seal Of Thecontractor.3. Carryout Repair/Replacement Of Defective Parts, Adjustments Requiredto Welding Machine Com Ponents, The Defects That Needcorrection/Repair/Adjustments Y The Contractor As Part Of Thiscontract.4. All Reakdown Maintenance Ca Ll Shall E Attended Within 24 Hrs. Ifrequired, Shall E Arranged On Holidays. In Case Contractor Failed Toattend The Reakdown Within 24 Hrs. The Third Party Will E Arrangedydewa To Rectify The Defect Within Short Notice, An Actual Amount Willincurred For Defect Re Ctification Will E Ack Charged To Thecontractor. All The Reakdown Maintenance Call Is Part Of This Contract.There Will E No Any Addi Tional Amount Will E Compensated Y Dewa.5. All The Engine Operated Welding Machines, Engine Oil, Air Filter Andengine Filter Shall E Replaced With Genuine Parts As Per Aovescheduled, Required Luricant, Filters Shall Arranged Y Contractor Athis Own Cost.6. Contra Ctor Is Required To Provide Unit Rate For Each Individualwelding Machine As Listed Aove To Carryout Periodic Maintenance Twicein A Y Ear.7. Complete Consumales, Spare Parts, Oil Filter, Air Filter, Engineoil, Manpower, Tools, Etc. Required For Safe And Timely Exec Ution Of Thejo Shall E Arranged Ycontractor. Also Safety Of The People Workingfor Contract Is His Responsiility.General Conditions. 1. Complete Resources Including Manpower, Materials, Tools, Tackles, Testing Instruments Etc. Required For Successful Completion Of The Jois A Part Of This Contract.2. Safety Of The Persons Working In Ehalf Is The Responsiility Ofsuccessful Idder. Contractor Shou Ld Strictly Follow Dewa Safety Andenvironment Regulations.3. The Idder Shall Have Adequate And Proven Experience In The Field Ofwel Ding Machines Maintenance.4. Contractor Required To Sumit Risk And Method Statement Prior Tostart The Jo.5. Jo Carry Out Shall Hav E Warranty For Period Of One Year From Dateof Jo Completion.6. No Welding, Flame Heating Or Cutting, Grinding Etc. Shall E Carriedout Without Specific Clearance From Dewa Though #Hot Work Permits#.7. Report Duty In Proper Uniform Printed Legily With Company Logo Andnormal Ppe Such As Helmet, Safety Shoe, Etc

Download Document

Related Information

Location

Dubai - Dubai, United Arab Emirates

Tender No

2411800724

Tender Type

Contract

Important Dates

Published on

07 Sep, 2018

Submission Date

09 Sep, 2018

Opening Date

09 Sep, 2018

Key Values

Work Value

NA

EMD

NA

Document Fee

NA

Middle East Countries Tenders »

European Countries Tenders »

African Countries Tenders »

Asian Countries Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us

W B


Copyright ©2018 - Thetenders.com. Read Policies