Bidding Support

556792

Bidding Support

Warm Greetings from www.thetenders.com, the fastest growing tender information portal in India.

Supply And Installation Of Electrical Materials Addressable Control Module Addressable Monitor Module Of Short Circuit Isolators Addressable Manual Call Point Resettable Type Addressable Electronic Sounder Cum Strobe Complete All As Specified And As Directed. Frls Armoured Copper Cable 2 Core 1.5 Sqmm Battery Operated Led Display Lights Exit Signage Wall Mounted With Battery Backup Of 5 Hrs For Fire Exit All As Per Cat No : Lssr5w Of Cg Its Equivalent Make From List Of Makes. Duly Painted Ms Pedestal Stand For Suspending Fire Buckets As Per The Specification. Red Painted Ms Fire Bucket Of 13 Ltrs Capacity Of Fire Approved Quality, Filled With Sand As Per The Specification & Standards. Foam Type Extinguisher Hand 9 Kg All As Per The Specification & Standards Dcp Type Abc 10 Kg Designed/Tested Is 15683 With Safety Release Valve, Nrv And Ce Approved Valve.Dry Powder Is 14609 With Its Standard Accessories As Per Specification & Standards Co2 Type Hand 9 Kg With Wheel As Per Is 2878 Complete With Hose, Screw Valve, Co2 Gas Is 1522, Cylinder Is 7285, Valve Is 3224.Tested At 250Kg/Cm2 All As Per The Specification & Standards. Material Required For Earthing Complete With Galvanised Earth Plate Electrode 600X600x6 Mm Thick Buried Directly In Ground Vertically Earth Pit Not Less Than 2.25 Mtr Deep Below Normal Ground Level With Top Edge Of Plate Note Less Than 1.5Mtr Below Ground Level Connected To Including Gi Strip 32X6mm Size Protected With G I Medium Grade Pipe 40Mm Dia For Earth Electrode Up To Test Point Or Up To 7.5 Mtr Whichever Is Less By Means Of Gi Nuts, Bolts, Check Nuts And Washer. Funnel, With Necessary Charcoal, Salt Etc And Material Required For Pcc Pit And Rcc Cover 1:2:4 Type B1 And Funnel With Necessary Charcoal, Salt Etc, Complete All As Per Electrical Plate No.3 Of Ssr Part-1 Including Testing For Required Value. Charges Towards Supply Of 32 X 6 Mm Thick Gi Strip As Per The Specification & Standards. Earthing Complete With Copper Earth Plate Electrode 600X600x3.15 Mm Thick Buried Directly In Ground Vertically Earth Pit Not Less Than 2.25 Mtr Deep Below Normal Ground Level With Top Edge Of Plate Not Less Than 1.5 Mtr Below Normal Ground Level Connected To And Including Copper Strip 20X3 Mm Size Protected With G I Medium Grade Pipe 40Mm Dia For Earth Electrode Up To Test Point Or Up To 7.5 Mtr Whichever Is Less By Means Of Copper Nuts, Bolts, Check Nuts And Washers Including Earth Work, Excavation, Pcc Pit And Rcc Cover 1:2:4 Type B1 And Funnel, With Necessary Charcoal, Salt Etc;Complete All As Per Electrical Plate No.3 Of Ssr Part - I Including Testing For Required Value Complete All As Specified And Directed For Scada System Charges Towards Supply Of Test Terminal Point Block Made Of Gun Metal Or Phosporous Bronze Of Size 75X75x25 Mm Including 3 Nos Of 8 Mm Dia Screws As Per The Specification & Standards. Charges Towards Supply Of Danger Notice Plate Of 1.6Mm Thick Mild Steel, Vitreous Enaneled White With Letters, Figures And Conventional Skull And Bones In Signal Red Colour And Fixed With Ms Clamps, Bolts And Nuts Of Approved Size For Ht, 25X20cm Complete All As Per The Specification & Standards Charges Towards Supply Of Synthetic Rubber Mat Of 2Mx1mx10mm For 420V As Per The Specification & Cea/Cei/Ksebl/Mes Standards. Charges Towards Supply Of Synthetic Rubber Mat Of 2Mx1mx19mm For 11Kv As Per The Specification & Cea/Cei/Ksebl/Mes Standards. Charges Towards Supply Of Cable Joining Kit For 11Kv Earthed Grade Cable For Indoor Termination Heat Shrink Type Joint Complete With Joining Material And Accessories Suitable For 3 Core Xlpe Armoured Aluminium Conductor Cable Of Size 240 Sqmm To 300 Sqmm Complete All As Per The Specification & Ksei Standards. Charges Towards Supply Of Cable Joining Kit For 11Kv Earthed Grade Cable For Indoor Termination Heat Shrink Type Joint Complete With Joining Material And Accessories Suitable For 3 Core Xlpe Armoured Aluminium Conductor Cable Of Size 70 Sqmm To 95 Sqmm Complete All As Per The Specification & Ksei Standards. Charges Towards Supply Of Cable Joining Kit For 11 Kv Earthed Grade Cable For Indoor End Termination Heat Shrink Type Joint Complete With Joining Material And Accessories Suitable For 3 Core Xlpe Armoured Aluminium Conductor Cable Of Size 70 Sqmm To 95 Sqmm Charges Towards Supply Of Non Pressure Np-2 Class Rcc Hume Pipe 150Mm Dia With Collar Jointed With Stiff Mixture Of Cm In 1:2 Including Excavation In Earth Work, Pcc Charges Towards Supply Of Non Pressure Np-2 Class Rcc Hume Pipe 100Mm Dia With Collar Jointed With Stiff Mixture Of Cm In 1:2 Including Excavation In Earth Work, Pcc Charges Towards Supply Of 100 Mm Dia Gi Pipe Light Grade For Cable Protection As Per The Specification & Standards. Charges Towards Supply Of 50 Mm Dia Gi Pipe Light Grade For Cable Protection As Per The Specification & Standards. Charges Towards Supply Of Digital Earth Resistance Tester Cambridge Instruments Det-2000 Charges Towards Supply Of Digital Multi Meter Make Shall Be Of Any Isi Marked Charges Towards Supply Of Ac-Dc Clamp Meter Amp Range 1000Dc, 800Ac Make Shall Be Of Any Isi Marked Charges Towards Supply Of Digital Megger- Lv 500 V Make Shall Be Of Any Isi Marked Charges Towards Supply Of Digital Thermometer Wall Hanging Make Shall Be Of Any Isi Marked Charges Towards Supply Of Digital Megger – Hv 10Kv Make Shall Be Of Any Isi Marked Charges Towards Supply Of Crimping Tool With Dye Range 50-400Sq-Mm Cable, Mechanical Gear & Hydraulic Operated Power, Hand Operated Make Shall Be Of Any Isi Marked Charges Towards Supply Of Crimping Tool Up To 6 Sq-Mm Cable Make Shall Be Of Any Isi Marked Charges Towards Supply Of Pcc Cable Covers Class Hv, Type 1, Flat, Size 300Mm X 180Mm X 40Mm Charges Towards Supply Of Pcc Cable Covers Class Lv, Type 1, Flat, Size 250Mm X 150Mm X 40Mm Charges Towards Supply Of Cable Route Indicator 15Cm Dia Made Out Of Cast Aluminium Duly Marked With Size And Type Of Cable Fixed On Isa 40X40x6mm Angle Iron Support Embedded Including In Pcc 1:2:4 Type B1 300X300x400mm And Steel Surface Painted With Two Coats Of Anti Corrosive Paint Over A Coat Of Red Oxide Primer Including Necessary Earth Work Charges Towards Supply Of Outdoor Ms Base Frame Mounted Cubical Type Factory Made Lt Panel Board Suitable For 415V 3 Phase 4 Wire, 50Hz Non-Metalic Kiosk Double Door With The Required Provision For 3 Switch Gears And Control Gears Along With The Approved Make. Enclosed In A Modular/Combinable Thermoplastic Polycarbonate Panel Enclosure Which Should Be Shock Proof, Ip65 Weather Proof, Rust Proof, Dust Proof, Water Proof, Corrosion Proof Having Internally Embadded Gasket On The Lid And Cable Entry Knockouts On All Sides Or Using Cable Entry Flanges Of Size 300 X 450 X 170Mm Required Of The Lt Panel Complete Fabrication Shall Be Painted As Per Specification. Lt Panel Board Shall Be Complete With All Standard Accessories Including Selector Switches, Phase Indicating Lamps Control Fuse Unit, Mv Danger Notice Plate Numbered/Lettered And With Comprising The Following. Make: Hensel Or Equivalent Make In List Of Manufactures Sl.Item No.1.47 Contd/.. Incoming: Mccb 160 A, 4 Pole, 25Ka-1 No. Including Cts, Digital Ammeter, Ass, Digital Volt Meter, Vss, Phase Indicating Lamps & Control Fuses/Mcbs Etc.. Bus Bar: One Set Of Tp&N 300A, Aluminium Bus Bar E 91 Grade, 1100 V, Grade Duly Covered With Heat Shrinkable Sleeves Colour Coded Duly Fixed On Moulded Brackets-1 Set. Outgoing: Separate Cubical Chamber With A Cable Alley Not Less Than 300 Mm Width For Installation/Connecting The Following Switch Gear: I Mccb 63A, 4 Pole, 25Ka - 1 Nos Ii Mcb Tp&N 32A, 16Ka - 2 Nos Iii Mcb Spn 32A, 16 Ka - 3 Nos Charges Towards Supply Of Materials For Artistic Painting In Black Letters With Yellow Background For Solar Array Structures, Smbs, Dc Cable In/Out, Earth Chambers, Pcus, Transformers, Ups, Dbs Etc. Charges Towards Supply Of Materials For Lightening Protection System Charges Towards Supply Of Materials For Soakage Pit Of Size 1.2M Dia, 3.0M Labour Charges For Installation Of Materials For 02Mw Solar Power Plant Project At Nad, Aluva Labour Charges Towards Installation, Testing And Commissioning Of 1250Kva Solar Inverter Duty Transformer, Including All Item Etc, All As Per The Direction Of Engineer In Charge & Iec Standards.Installation As Per Latest Cea/Cei/Mes Guidelines.Supply Of Transformers Under The Scope Of Keltron Cost Inclusive Of Providing Fencing Etc Extra As Required. Labour Charges Towards Installation, Testing And Commissioning Of 100Kva Stepdown Transformer, Including All Item Etc, All As Per The Direction Of Engineer In Charge & Iec Standards.Installation As Per Latest Cea/Cei/Mes Guidelines.Supply Of Transformers Under The Scope Of Keltron Cost Inclusive Of Providing Fencing Etc Extra As Required. Labour Charges Towards Installation, Termination And Commissioning Of 3 Core X 240Sq Mm Xlpe Insulated, Screened Pvc Bedded Galvanised Steel Strip Or Wire Armoured Heavy Duty With Alumininum Conductor, 11 Kv E Ht Cable As Per Is 7098 Part Ii1985. For Connecting Ht Transformer To Ht Panel To Meter Panel To Kseb Grid Including Supply Of Cable.Cost Inclusive Of Materials For Termination Of Cable, Checking Tightness Of Cable, Testing Sample Of Cable And Whole Length, Coordinating Mes With Sample Evaluavation And Testing As Per Mes Standards Etc As Applicable .Sand Cushioning With Dry River Sand Complete All As Specified And As Directed By Mes. Labour Charges Towards Installation, Termination And Commissioning Of 3 Core X 95Sq Mm Xlpe Insulated, Screened Pvc Bedded Galvanised Steel Strip Or Wire Aemoured Heavy Duty With Alumininum Conductor, 11 Kv E Ht Cable As Per Is 7098 Part Ii1985. For Connecting Ht Transformer To Ht Panel Including Supply Of Cable.Cost Inclusive Of Materials Required For Termination Of Cable.Min 2 Nos Of Ht Kit.Checking Tightness Of Cable, Testing Sample Of Cable And Whole Length, Coordinating Mes With Sample Evaluavation And Testing As Per Mes Standards Etc As Applicable .Sand Cushioning With Dry River Sand Complete All As Specified And As Directed By Mes. Labour Charges Towards Sand Cushioning With Dry River Sand Complete All As Directed As Per Mes Standards Including Exacavation Work Required Lt Cable And Ht Cable Work. Labour Charges Towards Installation Of Ht Interface Meter Abt Including Meter Installed In Totally Enclosed.Fully Interlock, Metal Clad Power Coated At Mes Sub Station-1 & Providing Suitable Capacity As Per Cmd Of Cts, Pts, Relay, Cable For Interconnection, Ht Insulater Etc All As Per The Specification & Site Condition. As Per Latest Norms Of Ksebl, Testing Of Cts, Pts And Abt Meter Inclusive, Cost Inclusive Of Any Additional Work Required For Completion Of This Work As Per Ksebl/Cei/Mes Direction. Labour Charges Towards Installation Of Ht 11Kv Grid Panel For Power Evacuation And Grid Interconnection Systems At Mrs Nad Gate Complete With Breakers, Cts, Pts, Vcb, Metering Panels Relays, Tod Meter Ht Check Meter Etc All As Per Design Parameter With Totally Enclosed Fully Interlocked Metal Clad Power Coated Enclosure Complete Modification/Extension Of Existing Ht Panel At Nad Shall Be Obtained From Prior To Install.Ct/Pt Of Metering Panel Shall Be Approved Make Of Ksebl And All As Per Guide Lines Given In The Kserc Notification Complete All As Per Specified And Charges Toward Materials Rquired For Imstallation Testing And Commisioning Of Above Panel As Per Mes/Cea/Cei/Ksebl Standards. Labour Charges Towards Installation Of Addressable Type Fire Alarm Control Panel Complying With Bs En 54 Single Loop Panel Of Capacity From 99 Detectors & 99 Modules Upto 200 Detector. Labour Charges Towards Installation Of Detectors Complying With And Type Certified To En-45 Addressable Type Multisensor Detector With Heat And Smoke Combination Photoelectric / Optical With Base With Self Built Intelligence As Per Is: 11360 Labour Charges Towards Installation Of Addressable Control Module Labour Charges Towards Installation Of Addressable Monitor Module Labour Charges Towards Installation Of Short Circuit Isolators Labour Charges Towards Installation Of Addressable Manual Call Point Resettable Type Labour Charges Towards Installation Of Addressable Electronic Sounder Cum Strobe Complete All As Specified And As Directed. Labour Charges Towards Installation Of Frls Armoured Copper Cable 2 Core 1.5 Sqmm Labour Charges Towards Installation Of Battery Operated Led Display Lights Exit Signage Wall Mounted With Battery Backup Of 5 Hrs For Fire Exit All As Per Cat No : Lssr5w Of Cg Or Its Equivalent Make From List Of Makes. Labour Charges Towards Installation Of Duly Painted Ms Pedestal Stand For Suspending Fire Buckets As Per The Specification. Labour Charges Towards Installation Of Red Painted Ms Fire Bucket Of 13 Ltrs Capacity Of Fire Approved Quality, Filled With Sand As Per The Specification & Standards. Labour Charges Towards Installation Of Foam Type Extinguisher Hand 9 Kg All As Per The Specification & Standards Labour Charges Towards Installation Of Dcp Type Abc 10 Kg Designed/Tested Is 15683 With Safety Release Valve, Nrv And Ce Approved Valve.Dry Powder Is 14609 With Its Standard Accessories As Per Specification & Standards Labour Charges Towards Installation Of Co2 Type Hand 9 Kg With Wheel As Per Is 2878 Complete With Hose, Screw Valve, Co2 Gas Is 1522, Cylinder Is 7285, Valve Is 3224.Tested At 250Kg/Cm2 All As Per The Specification & Standards. Labour Charges Towards Installation Of Material Required For Earthing Complete With Galvanised Earth Plate Electrode 600X600x6 Mm Thick Buried Directly In Ground Vertically Earth Pit Not Less Than 2.25 Mtr Deep Below Normal Ground Level With Top Edge Of Plate Note Less Than 1.5Mtr Below Ground Level Connected To Including Gi Strip 32X6mm Size Protected With G I Medium Grade Pipe 40Mm Dia For Earth Electrode Up To Test Point Or Up To 7.5 Mtr Whichever Is Less By Means Of Gi Nuts, Bolts, Check Nuts And Washer. Funnel, With Necessary Charcoal, Salt Etc And Material Required For Pcc Pit And Rcc Cover 1:2:4 Type B1 And Funnel With Necessary Charcoal, Salt Etc, Complete All As Per Electrical Plate No.3 Of Ssr Part-1 Including Testing For Required Value. Labour Charges Towards Installation Of 32 X 6 Mm Thick Gi Strip As Per The Specification & Standards. Labour Charge Towards Installation Of Materials Required For Earthing Complete With Copper Earth Plate Electrode 600X600x3.15 Mm Thick Buried Directly In Ground Vertically Earth Pit Not Less Than 2.25 Mtr Deep Below Normal Ground Level With Top Edge Of Plate Not Less Than 1.5 Mtr Below Normal Ground Level Connected To And Including Copper Strip 20X3 Mm Size Protected With G I Medium Grade Pipe 40Mm Dia For Earth Electrode Up To Test Point Or Up To 7.5 Mtr Whichever Is Less By Means Of Copper Nuts, Bolts, Check Nuts And Washers Including Earth Work, Excavation, Pcc Pit And Rcc Cover 1:2:4 Type B1 And Funnel, With Necessary Charcoal, Salt Etc;Complete All As Per Electrical Plate No.3 Of Ssr Part - I Including Testing For Required Value Complete All As Specified And Directed For Scada System Labour Charges Towards Installation Of Test Terminal Point Block Made Of Gun Metal Or Phosporous Bronze Of Size 75X75x25 Mm Including 3 Nos Of 8 Mm Dia Screws As Per The Specification & Standards. Labour Charges Towards Installation Of Danger Notice Plate Of 1.6Mm Thick Mild Steel, Vitreous Enaneled White With Letters, Figures And Conventional Skull And Bones In Signal Red Colour And Fixed With Ms Clamps, Bolts And Nuts Of Approved Size For Ht, 25X20cm Complete All As Per The Specification & Standards Labour Charges Towards Installation Of Synthetic Rubber Mat Of 2Mx1mx10mm For 420V As Per The Specification & Cea/Cei/Ksebl/Mes Standards. Labour Charges Towards Installation Of Synthetic Rubber Mat Of 2Mx1mx19mm For 11Kv As Per The Specification & Cea/Cei/Ksebl/Mes Standards. Labour Charges Towards Installation Of Cable Joining Kit For 11Kv Earthed Grade Cable For Indoor Termination Heat Shrink Type Joint Complete With Joining Material And Accessories Suitable For 3 Core Xlpe Armoured Aluminium Conductor Cable Of Size 240 Sqmm To 300 Sqmm Complete All As Per The Specification & Ksei Standards. Labour Charges Towards Installation Of Cable Joining Kit For 11Kv Earthed Grade Cable For Indoor Termination Heat Shrink Type Joint Complete With Joining Material And Accessories Suitable For 3 Core Xlpe Armoured Aluminium Conductor Cable Of Size 70 Sqmm To 95 Sqmm Complete All As Per The Specification & Ksei Standards. Labour Charges Towards Installation Of Cable Joining Kit For 11 Kv Earthed Grade Cable For Indoor End Termination Heat Shrink Type Joint Complete With Joining Material And Accessories Suitable For 3 Core Xlpe Armoured Aluminium Conductor Cable Of Size 70 Sqmm To 95 Sqmm Labour Charges Towards Installation Of Non Pressure Np-2 Class Rcc Hume Pipe 150Mm Dia With Collar Jointed With Stiff Mixture Of Cm In 1:2 Including Excavation In Earth Work, Pcc Labour Charges Towards Installation Of Non Pressure Np-2 Class Rcc Hume Pipe 100Mm Dia With Collar Jointed With Stiff Mixture Of Cm In 1:2 Including Excavation In Earth Work, Pcc Labour Charges Towards Installation Of 100 Mm Dia Gi Pipe Light Grade For Cable Protection As Per The Specification & Standards. Labour Charges Towards Installation Of 50 Mm Dia Gi Pipe Light Grade For Cable Protection As Per The Specification & Standards. Labour Charges Towards Installation Of Pcc Cable Covers Class Hv, Type 1, Flat, Size 300Mm X 180Mm X 40Mm Labour Charges Towards Installation Of Pcc Cable Covers Class Lv, Type 1, Flat, Size 250Mm X 150Mm X 40Mm Labour Charges Towards Installation Of Cable Route Indicator 15Cm Dia Made Out Of Cast Aluminium Duly Marked With Size And Type Of Cable Fixed On Isa 40X40x6mm Angle Iron Support Embedded Including In Pcc 1:2:4 Type B1 300X300x400mm And Steel Surface Painted With Two Coats Of Anti Corrosive Paint Over A Coat Of Red Oxide Primer Including Necessary Earth Work Labour Charges Towards Installation Of Outdoor Ms Base Frame Mounted Cubical Type Factory Made Lt Panel Board Suitable For 415V 3 Phase 4 Wire, 50Hz Non-Metalic Kiosk Double Door With The Required Provision For 3 Switch Gears And Control Gears Along With The Approved Make. Enclosed In A Modular/Combinable Thermoplastic Polycarbonate Panel Enclosure Which Should Be Shock Proof, Ip65 Weather Proof, Rust Proof, Dust Proof, Water Proof, Corrosion Proof Having Internally Embadded Gasket On The Lid And Cable Entry Knockouts On All Sides Or Using Cable Entry Flanges Of Size 300 X 450 X 170Mm Required Of The Lt Panel Complete Fabrication Shall Be Painted As Per Specification. Lt Panel Board Shall Be Complete With All Standard Accessories Including Selector Switches, Phase Indicating Lamps Control Fuse Unit, Mv Danger Notice Plate Numbered/Lettered And With Comprising The Following. Make: Hensel Or Equivalent Make In List Of Manufactures Sl.Item No.1.47 Contd/.. Incoming: Mccb 160 A, 4 Pole, 25Ka-1 No. Including Cts, Digital Ammeter, Ass, Digital Volt Meter, Vss, Phase Indicating Lamps & Control Fuses/Mcbs Etc.. Bus Bar: One Set Of Tp&N 300A, Aluminium Bus Bar E 91 Grade, 1100 V, Grade Duly Covered With Heat Shrinkable Sleeves Colour Coded Duly Fixed On Moulded Brackets-1 Set. Outgoing: Separate Cubical Chamber With A Cable Alley Not Less Than 300 Mm Width For Installation/Connecting The Following Switch Gear: I Mccb 63A, 4 Pole, 25Ka - 1 Nos Ii Mcb Tp&N 32A, 16Ka - 2 Nos Iii Mcb Spn 32A, 16 Ka - 3 Nos Labour Charges Towards Installation Of Materials For Artistic Painting In Black Letters With Yellow Background For Solar Array Structures, Smbs, Dc Cable In/Out, Earth Chambers, Pcus, Transformers, Ups, Dbs Etc. Labour Charges Towards Installation Of Lightning Protection System Labour Charges Towards Excavation And Getting Out Hard/Loose Soil/Disintegrated Rock And Refilling Labour Charges Towards Soakage Pit Of Size 1.2M Dia, 3.0M Effective Depth Including Necessary Earthwork Charges Towards Testing Of Energy Meter, Netmeter, Ct, Pt Etc Charges Towards Obtaining Scheme Approval, Energisation Order Etc Of 2Mw Grid Tied Solar Power Plant At Nad, Aluva From Cei/Ksei Including Statuatory Fees Charges Towards Any Other Item Required For Completing Above Work As Per Mes/Cea/Cei/Kseb/Ksei Standards

TRN :20693307
Corporations And Associations And Others / Electronics
Aluva - Kerala

INDIAN Hire Our Expertise :

  • Tender Bidding
  • Tender Consultancy
  • Tender Advisory
  • Identify Eligibility Criteria
  • Identify Penelty Clauses
  • Highlight Important Dates
  • Technical Bid Preparation
  • Offline Bid Preparation
  • Online Bid Preparation
  • Offline Bid Submission
  • Online Bid Submission
  • Track Corrigendum / Addendums
  • Attend Pre Bid Meetings
  • Consistent Liaison & Coordination
  • EMD Follow Ups

INDIAN - bidding
image

We heartily welcome your move to excel your business to new heights.

Set Tender Alert

Activate daily alerts to know the tenders available of your work.

Get alerts

Bidding Support

Ask experts, how to fill bid forms, submit bids, participate in bids.

Get in touch

GeM Registration

Looking for GeM Registration? Get in touch with us and we will do the needful.

Registration

Digital Certificate

Get DSC for e-Tendering, e-Auction, e-bidding, Corporations / Associations / Others Tenders

Purchase now

Tender Awards

Want to know who's got the tender and are looking for subcontracting?

Connect now

Projects

Government and other private players, Real-time Updates of Project Information

Get info

International Tenders

We almost cover all the regions and countries across the world. Click to take your business to new heights.

Start now

Web Design

Get the Best Offers & Deals, expertise in developing static websites, dynamic websites and e-commerce.

Design now