Bidding Support

476315

Bidding Support

Warm Greetings from www.thetenders.com, the fastest growing tender information portal in India.

Supply of Executive Chair,(1). SEAT ASSEMBLY: The seat is made up of 1.4 ± 0.1 cm thick hot - pressed plywood upholstered with fabric and moulded polyurethane foam. It has a seat depth adjustment of 5.0 ±0.3 cm integrated in the seat through a sliding mechanism.SEA, Executive Table Work Surface:Made of combination of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top and 25mm Thick Prelaminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Softclosing access flap with in-build power box are provided on work surface for wire management. Modesty Panel:Made of 25mm thick MDF one side prelaminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Under- structure:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestal is provided with lock for security., Storage Unit Product Size:(448(W)/598(W) x 18(T) x 1510(H) Glass Door). (448(W)/598(W) x 18(T) x 761 (H) Metal Door) (Combi Lock) Bid Number/???? (???? (?? ??)??) : GEM/2024/B/5522592 Dated/*????? : 21-10-2024 Bid Document/ ?? ?1????? 1 / 14 GeMARPTS ?3 ???? ?? 617?? / Searched Strings used in GeMARPTS Single side Door for 450W and 600W 2 side Doors (LH and RH) for 900W and 1200W For 450W and 900W storage-Each Door width 448W For 600W and 1200W storage-Each Door width 598W Construction & Material:Glass Door is made from the combination of aluminium alloy (63400) extrusion and clear glass.. Metal Door is made from 0.6mm thick CRCA (D Grade, IS-513).Soft closing Hinge. Handle:Asthetically appealing handle made of Aluminium Finish:Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron), Visitor Chair 1.SEAT/BACK ASSEMBLY: The seat should be made up of 1.2 ±0.1cm. thick hot pressed plywood and upholstered with fabric or synthetic leather and moulded Polyurethane Foam. The back should be made up 1.2 ±0.1cm. thick hot pressed plywood upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam. The back ply and foam should be designed with contoured lumber support for comfortable seating posture. MID BACK SIZE 48.0cm.(W) X 64.5cm.(H) SEAT SIZE 51.0cm.(W) X 48.0cm.(D) 2.HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam for seat and back should be moulded with density = 45±2 kg/m³ and Hardness load 16 ± 2 kgf for 25% compression. 3.ARMRESTS:The armrest top should be made of moulded polyurethane (P.U) and mounted on to a fixed type M.S. tubular armrest support which should be chrome plated. The arm support has static vertical adjustment of ±1.5±0.05cm. 4.FIXED BACKREST: The backrest consshould be ts of a fixed type mechanism i.e. no back up/down adjustment. 5.LEG FRAME ASSEMBLY: The leg frame welded assembly should be chrome plated, made from 3.5 ±0.03cm. x 1.5 ±0.02cm. x 0.16 ±0.0128cm. thk Elliptical M.S. ERW tube and provided with a base plate for seat fixing, Computer Table Enterprise 1500 Table with CPU Hanger size shall be 1500 Width mm x 750 Depth mm x 728 Height mm . Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyster) ., Sofa 2 Seater Understructure : Understructure of seat is made up of combination of pinewood members and 12mm thick Plywood. Pinewood are of Understructure·cross sections 22x64mm,34x64mm and 16x35mm without having major knots & defects on the surface. Complete understructure of Seat is made by gluing, nailing & stapling. Non-woven fabric of 100GSM is stapled on the top surface after attaching ZigZag spring to cover the structure. Seat support tube made up of Steel is added in the seat structure of 2 Seater,3 Seater and Chaise for additional strength & support. Foam : Seating surface is made by using pocket spring of wire dia 2mm which is surrounded by PU foam of density 28 kg/m3. Bid Details/?? ???? 2 / 14 A top layer of supersoft PU foam with density 32 kg/m3 is used to provide softness. Upholstery cover : Upholstery cover of seat is made of woven fabric. 2. Backrest : (1 Seater, 2 Seater, 3 Seater,Chaise,Corner,Wing chair) Understructure: Understructure is made up of combination of pinewood members, 12mm THK ·Plywood and HDPE sheet. Pinewood are of cross sections 16x35mm, 16x74mm, 25X25mm without having major knots & defects on the surface.Foam: Backrest is made of PU foam with density 60 kg/m3. Upholstery cover : Upholstery cover of backrest is made of woven fabric. 4.Cushion :(1 Seater, 2 Seater, 3 Seater, Chaise,Corner,Wing chair) Cushion is made up of loose recron filled in White non-woven 30 GSM bag. This stitched non-woven bag is kept inside the upholstery cover of cushion pillow. Upholstery cover : Upholstery cover of cushion is made of woven fabric.The cover is in dual tone , bottom half made with Fabric-1(woven finish fabric) & upper half with Fabric2(velvet finish fabric). 5. Upholstery :Complete sofa is uplholstered with woven fabric which has the following colour schemes: 1. CHARCOAL ,2. PURPLE HAZE 6. Legs : Polypropylene leg (with 20% talc for better filled with M8 steel stud in black color. 7. Armrest (Normal Amrest LH & RH & wing Armrest) Understructure : Understructure of armrest is made up of combination of pinewood members, 12mm thick Plywood, 3mm thick MDF. Pinewood are of cross sections 16x79mm without having major knots & defects on the surface. Complete understructure of Armrest is made by gluing, nailing & stapling. Foam : Foaming of Armrest is done with density 28kg/m3 and 60kg/m³. 8. Console Armest : Understructure : Understructure of armrest is made up of 12mm thick ply.PLT panels are used to make shutter flaps for console armrest. Soft closing hinges are provided to these shutter flaps. Complete understructure of Armrest is made by gluing, nailing & stapling.Foam : Foaming of Armrest is done with density 28kg/m

TRN :33147700
Central Government And Public Sector / Education And Research Institutes
Bhubneshwar - Orissa

INDIAN Hire Our Expertise :

  • Tender Bidding
  • Tender Consultancy
  • Tender Advisory
  • Identify Eligibility Criteria
  • Identify Penelty Clauses
  • Highlight Important Dates
  • Technical Bid Preparation
  • Offline Bid Preparation
  • Online Bid Preparation
  • Offline Bid Submission
  • Online Bid Submission
  • Track Corrigendum / Addendums
  • Attend Pre Bid Meetings
  • Consistent Liaison & Coordination
  • EMD Follow Ups

INDIAN - bidding
image

We heartily welcome your move to excel your business to new heights.

Set Tender Alert

Activate daily alerts to know the tenders available of your work.

Get alerts

Bidding Support

Ask experts, how to fill bid forms, submit bids, participate in bids.

Get in touch

GeM Registration

Looking for GeM Registration? Get in touch with us and we will do the needful.

Registration

Digital Certificate

Get DSC for e-Tendering, e-Auction, e-bidding, Corporations / Associations / Others Tenders

Purchase now

Tender Awards

Want to know who's got the tender and are looking for subcontracting?

Connect now

Projects

Government and other private players, Real-time Updates of Project Information

Get info

International Tenders

We almost cover all the regions and countries across the world. Click to take your business to new heights.

Start now

Web Design

Get the Best Offers & Deals, expertise in developing static websites, dynamic websites and e-commerce.

Design now

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us

W B


Copyright ©2018 - Thetenders.com. Read Policies