Filters

List of minerals Tenders

List of latest minerals Tenders in Indian Tenders. Click on any minerals Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for minerals Tenders.

All-Tenders (803)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government And Public Sector

TRN :35557447 | 31 Oct, 2025

Tender Value : 0

Raebareli - Uttar Pradesh

Tender for supply of hardness test calibration block size-100mm x 100mm x 16 mm, hardness range:- 250 to 300 bhn, suitable for test method 10 mm/3000 kgf. material:- fine grained homogeneous steel, form:-square, maximum allowed variation of hardness value:- ? 4bhn, accuracy: more than 95%, block should have demarcation line for indentation. block shall have a valid calibration certificate as per din en iso 650/3..

State Government

TRN :35557450 | 13 Oct, 2025

Tender Value : 2.91 Lacs

Jammu - Jammu And Kashmir

Tender for construction of community hall near shiv temple, w.no.1 vill. chak bana pyt. chak bana part ii pyt.chak bana block bishnah under capex ddc for the financial year 2025-2026. block level

State Government

TRN :35557458 | 13 Oct, 2025

Tender Value : 2.33 Lacs

Jammu - Jammu And Kashmir

Tender for construction of lane with protection work from sagar mal to primary school at p.s pura at pyt. chorli block bishnah under capex pri for the financial year 2025-2026. block level

Central Government/Public Sector

TRN :35557459 | 27 Oct, 2025

Tender Value : 22.02 Lacs

Chamba - Himachal Pradesh

Tender for gem bids for welding hand gloves pair unit is in pair , grinding safety goggles , welding leather leg guard 1 pr is 1 no unit is in pair , welding leather hand sleeves unit is in pair , chipping hammer , flap disc buffing wheel size 100 mm and grit 80 , flap disc buffing wheel size 125 mm and grit 80 , hss hand tap set 30 mmx35 mm 1 set 03 nos unit is in set , adjustable spanner phosphate finish and jaw opening 43mm , wire brush bristle metal and body wooden and width 50 mm and length bristle 30 mm , duster cloth 50x40 cm , cut resistant hand gloves and cut level 4 or 1 unit is in pair , knitted cotton hand gloves and medium size 1 pair 2 nos unit is in pair , ball valve 1 inch and screwed end and moc of body cast steel , ball valve 1 or 2 inch and screwed end and moc of body cast steel , measuring tape and length 5 meter and stainless steel , measuring tape and length 15 meter and stainless steel , paint brush 4 inch , paint brush 2 inch , markin cloth 120 gsm unit is in meter , screw driver set , rain coat shirt pant with cap and size xl , enamel paint green unit is in liter , enamel paint sky blue unit is in liter , enamel paint red unit is in liter , thinner for epoxy paint , red oxide primer unit is in liter , heavy duty forged alloy steel d shackle5 tonne , thrust ball bearings single direction no 51210 , saftey helmet with nhpc logo , ear muff noise reduction rating 30dba ep22 conforming to is 9167 , gumboot assorted sizes 5 and 6 and 7 and 8 and 9 and 10 and 11 and 12 as per buyers requirements 1 pr is 1 no , tirpal 18x12 100 water proof heavy duty tarpaulin 500 gsm , teflon tape , araldite 180 gmresinhardener , set of center punch , wire breaded rubber pipe for gauging unit is in meter , rechargeable led torch light and 5w , khaddar cloth unit is in metre , plain washer and m 30and iso 7089 a2c , set of stainless steel washersand grade 304 m6and m8and m10and m12and m16and m20and m24 uom is in set , set of stainless steel external tab locking washer din 463 m6and m8and m10and m12and m16and m20and m24and m30 uom is in set , hex socket set screw iso 4026 m12x20and a270 , hex screw iso 4017 m16x35and a270 , socket set screw scr iso 4026 m12x10anda270 , socket head cap screw iso 4762 m10x40 , socket set screw scr iso 4026 m16x16and a270 , cylindrical pin f or maintenance seal size length 14mm and dia 10mm mocastm a276 gr 420 , hex screw m12x30andiso4017andcl88 a2c , plain washer and m 39and iso 7089 a2c , hex screw m6x16 andiso 4017 and a270 , hex screw m6x8 andiso 4017 and a270 , hex screw m12x40 andiso 4017 and a2cand88 , set of double ended open jaw spanner chrome plated 6x7and 8x9and 10x11and 12x13and 14x15and 16x17and 18x19and 20x22and21x23and 24x27and 25x28and 30x32 1 nos 1 set uom is in set , set of double ended ring spanner chrome plated 6x7and 8x9and 10x11and 12x13and 14x15and 16x17and 18x19and 20x22and21x23and 24x27and 25x28and 30x32 uom is in set , ms channel 75mmx40mm weight 7 point 10 kgm uom is in kg , ms channel 100mmx50mm weight 9 point 6 kgm uom is in kg , ms plateand astm a 36and thickness 25 mmandsize 4x6 , ms plateand astm a 36and thickness 10 mmandsize 4x6 , ms plateand astm a 36and thickness 5 mmandsize 4x6 , ms plateand astm a 36and thickness 3 mmandsize 4x6 , ms angle 50x50x5mm weight 38 kgm uom is in kg , ms angle 25x25x5 mm uom is in kg , ss round bar dia 12 mm astm a276 gr421 uom is in meter , ss round bar dia 16 mm astm a276 gr422 uom is in metre , set of ss threaded rod astm a276 gr304 length 1 mtrm6andm12andm16andm24 uom is in set , set of threaded rod class 8point8a ms length 1 mtr size m12andm16and m24 uom is in set , set of clamp adjustable 1by4 inch and 1by2 inch and 3by4inch and 1by5 inch and 2inch uom is in set , g i pipe 1by2 uom is in metre , ugb coupling dowel bolts m12x40 half threaded , ss welding electrodeand e309 mol15and size3point15x350 mm uom is in kg , ss welding electrodeand e309 mol15and size2point5x350 mm uom is in kg , ms welding electrodeande7018 low hydrogenand size3point15 , gouging electrode and copper clad dc and dia 9 mmand length 300 mm , grinding face shield saftey helmet , emery paper grit80 100 mm x 50 m , emery paper grit120 100 mm x 50 m , emery paper gr 400 100 mm x 50 m , emery paper grit size 320 and size100 mm x 50m 1 roll 1 no , emery paper no 600 100 mm x 50 m lenth roll , combination stone 1x2x6 , hilti std stud anchor hsa m12x145 65by50by15pack of 25 pcs , hilti std stud anchor hsa m16x117 20by5 pack of 16 pcs , heavy duty steel sledge hammer set 5 kg , tungsten carbide rotary burr cylindrical and shank 6mmand head dia 12point7 mmand head length 19 mmand total length 69 mm , tungsten carbide rotary burr conicaland shank 6mmand head dia 16 mmand head length 25 mmand total length 75 mm , abrasives emery spindle mopsand dia 50 mmand grit 120and straight shank 1by4 , abrasives emery spindle mopsand dia 25 mmand grit 120and straight shank 1by4 , abrasives emery spindle mopsand dia 16 mmand grit 120and straight shank 1by4 , metal grinding discand dia 100 mm thickness 4 mmfor stainless steel and portable grindinganda 36 q bf , metal grinding discand dia 125mmandthickness 6 mm for stainless steelandportable grindinganda24pb , metal grinding discand dia 180mmandthickness 6 mm for stainless steelandportable grindingand , metal cutting discand dia 100 mmand thickness 2point5 mmanda30 s bf , metal cutting discand dia 125 mmand thickness 2point5 mmanda30 s bf , metal cutting discand dia 180 mmand thickness 3point0 mmanda30 s bf , quick change tool post for lathe machine nagmati 235by3 , aviation tin cutter , dial indicator mitutoyo , filler gauge 0point03 to 1 mm and150 mm length stainless steel , filler gaugeand 0point05 mm to 10mm and length 450 mm stainless steel1 set 1 no , filler gaugeand 0point05 mm to 10mm and length1000 mm stainless steel , set of filler strips 0point04and0point05and0point07and0point09and0point1an d0point15 0point2 mm 300 mm long , epoxy paint and pearl whiteand ral 1013 , dp test kit including cleanerandpenetrant developer 1 set 1 nos , propan2ol isopropyl alcohol , halogen rodand 230vand 1000w , halogen rodand and 230vand500w , loctite 406 20 gm pack , loctite 243 50 ml , loctite 587 300 mland blu rtv , lpg flexibile high pressure hose pipe , diffrential pressure guage 025 bar , foam sheet 2 feetx 6 feet 10 mm thick , carbide tip cutting tool rh tool 34 x 34 x 55 , ms socket 12 , gi nipple 12x4 , allen key long ball point set mm sizes , allen key long ball point set inch sizes , steel scale 30 cm , arc welding holder 600 amps , heavy duty earthing holderand 600 amps , gasket 300 mmand make champion , graphite gland packingand size 8 mm for pump , graphite gland packingand size 10 mm for pump , graphite gland packingand size 12 mm for pump , pipe repair clamp dia 200 mm , pipe repair clamp dia 250 mm , pipe repair clamp dia 300 mm , heavy duty bench vice 6 inch , digital vernier calliper 150 mm , manual ordinary vernier calliper 150 mm , vernier calliper 12inch 300 mm digital , vernier calliper 12inch 300 mmordinary , extension board 16 amp and 6 amp with 10 m cord , soft face mallet hammer sfh50 , steel scale 60 cm , steel scale 100 cm , paint orange ral 2000 , impact wrench and 1by2 sq drive electric , impact wrench and 3by4 sq drive electric , heavy duty screw driver , 6 inch green silicon carbide bench grinding wheeland 1by2 arborand 3by4 thickness and 80 grit , male hex nipple threaded reducer zinc finish plating set 1by4inch to 1by2 inch and 1inch to 1by2inch and3by4 inch to 1by2 and 1inch to 3by4inch , malmal cloth , hss tap set with handle 6mm , hss tap set with handle 10mm , hss tap set 16 mmx2point0 mm 1 set 1 nos , hss tap set 12mmx25 mm , spirit level point5mm accuracy and with magnet , welding or cutting safety goggles black glass , multipurpose oil can , lathe cutoff parting tool holder 3by4 inch width , copper welding cable 600 a 10 mtr , ss shim 0point01 mmand 350 mm x 1000 mm ss 304 , ss shim 0point02 mmand 350 mm x 1000 mm ss 304 , ss shim 0point03 mmand 350 mm x 1000 mm ss 304 , ss sheet thickness 0point05 mm x 1000mmmx1000 mm aisi 304 , ss sheet thickness 0point1mm x 1000mmmx1000 mm aisi 304 , ss sheet thickness 0point2mm x 1000mmmx1000 mm aisi 304 , ss sheet thickness 0point3mm x 1000mmmx1000 mm aisi 304 , ss sheet thickness 0point5mm x 1000mmmx1000 mm aisi 304 , ss sheet thickness 1point0 mm x 1000mmmx1000 mm aisi 304 , eye bolt with collarand size m12and is 4190and capacity 220 kg , eye bolt with collarand size m16and is 4190and capacity 380 kg , hex head ms bolt m12x60 cl 8point8 with nut half threaded , hex head ms bolt m12x90 cl 8point8 with nut half threaded , hex screw iso 4017 m24x75 8point8 a2c , hex bolt iso 4014 m30x150 8point8 a2c , hex nut iso 4032 m30x35p 8 a2c , single phase highy insulated frp telescopic earthdischarge rodand 11by33kvand 3 sectionand hv test110kvandwith 6 mtr 6 sqmm copper cable , single phase highy insulated frp telescopic earthdischarge rodand 132by220kvand 3 sectionandhv test 400kvandwith 10 mtr 25sqmm copper cable , ms welding electrodeande7018 low hydrogenand size2point5x350 mm

State Government

TRN :35557490 | 13 Oct, 2025

Tender Value : 1.79 Lacs

Jammu - Jammu And Kashmir

Tender for construction of drain from main road to h/o amar nath ward no 5 baba fareed nagar sehora a block bishnah under capex pri for the financial year 2025-2026. block level

Central Government/Public Sector

TRN :35557521 | 17 Oct, 2025

Tender Value : 0

Nagpur - Maharashtra

Tender for gem bids for enamel, synthetic, exterior (a) undercoating (b) finishing (v4) confirming to is 2932 (q3)

Central Government/Public Sector

TRN :35557559 | 18 Oct, 2025

Tender Value : 0

Kamrup - Assam

Tender for gem bids for roofing sheet 20 feet make tata or jsw, roofing sheet17 feet make tata or jsw, cement bag make ambuja orultratech or acc, sand, 2 inch x 2 inch square pipe maketata or jindal or apl apollo, 4 inch x 2 inch iron pipe maketata or jindal, welding rod, cutting blade 4 inch makebosch or black and decor, binding wire, aluminiumchannel, pop panels white 2 feet x 2 feet, self drillingscrew 2 inch, red oxide make dulux or berger or asian, black paint make dulux or berger or asian, thinner makedulux or berger or asian, wire 2 point 5 sqmm makepolycab or havells or finolex, wire 1 sqmm make polycabor havells or finolex, mcb box make bajaj or havells oranchor, switch board 6 pole make bajaj or havells oranchor, fan ceiling make bajaj or havells or phillips, regulator ake bajaj or havells or phillips, tube light makebajaj or havells or phillips, caping case 2 inch make anchoror bajaj, s s comb with box 5 amp make bajaj or havells oranchor, switch 5 amp make bajaj or havells or anchor, socket 5 amp make bajaj or havells or anchor, aluminiumangle, aluminium patti, magnetic drill adaptor, plywood 8x 4 x1 2 mm make century ply or greenply or kitply, 1 inchblack screw, mcb 32 a spn make finolex or hager orhavells, mcb distribution box make finolex or hager orhavells

State Government

TRN :35557850 | 16 Oct, 2025

Tender Value : 50.00 Lacs

Barmer - Rajasthan

Tender for supply of construction materials - ghadla/kankar/jhajhra, mortar-soil/mud masala, kiln lime for lime masonry work, cement, ppc. , white cement, fine aggregate, sand/gravel, gravel - local, ash, surkhi, stone powder (tone dust, masonry programme), mud stone/tick, stone 40mm of standard size(hand broken pieces)(voice cut 1/11), 40mm stone pieces(crushed by crusher)(voice cut) 1/11), 20mm pieces of stone(broken by crusher), 12/10/6mm pieces of stone(broken by crusher), tank earth, material for road work(including 5 cm. lead), 63-40 mm crushed stone (voice cut 1/11), 90-45 mm. hand broken stone aggregate (voice cut 1/11), very ribush (voice cut 1/6), gravel, binding material., stone, solag / kharanja / machining stone, machining bera, machining raksha, kharanja solag, jodhpuri type stone strip / arch / slab pieces (length 2-3', width 10-12", thickness 2.5-3.5"), stone chips, sandstone, 25mm thickness, floor / slab cutting slab, floor slabs upto 35mm thick, min. 3 sqft or more area, slab for slab 60-75mm thickness, min. 3 sqft or more area , unpolished rough kota tone, polished kota tone (one side polished), marble stone, marble chisels, marble powder, marble stone, stone door frame, stone leaves, fr pvc insulated copper conductor single core cable isi marked, fittings in local wood (for doors, windows & furniture), mango, babul, factory made doors, charl steel, iron, winding wire, iron girders, cornice iron/square bars/strips/angle iron, barbed iron wire, mesh, iron mesh, cement concrete mesh akash patal 40 mm thick, glass, 3 mm. coarse glass, paint, enamel paste, dipping paper, 7 lime - for whitewashing (saw/bud), primer (for iron/wood), petroleum products

State Government

TRN :35557999 | 16 Oct, 2025

Tender Value : 30.35 Lacs

Jaipur - Rajasthan

Tender for "part-a (building work) based on bsr pwd - 2019, dausa earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils " "pcc in foundation : providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)." random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in: cement mortar 1:6 ( 1-cement : 6-sand). centering and shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix supplying and filling in plinth with sandy soil free from deleterious and organic material under floors including watering ramming consolidating and dressing complete including cost of sandy soil with all lead and lift. stone kharanja : random rubble dry stone kharanja under floor. brick work with clay flyash f.p.s. brick of class designation 75 in superstructure above plinth level upto floor five level in : cement mortar 1 : 6 (1 cement : 6 coarse sand) beam:- providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) providing and fixing m.s. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint extra for double leaf shutters. glazed windows : providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required : windows side hung /ventilators top or centre hung (openable) supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. guard bars : providing and fixing square bars or other flat welded to window, ventilatiors etc. kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm internal plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick. external plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. plaster (ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. painting exterior surface of wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including sand papering, prime coat, making smooth surface with cement based putty etc complete in all respect: . new work panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work door frames:-providing and fixing in cm 1 : 4 double paitam (rebated) stone door window and ventilator frames of approved quarry :size 100 x 75mm. p&f rigid pvc pipe (is:4985 mark) class ii(4 kg. /cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant 110mm dia p&f rigid pvc pipe fittings (is: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: bend 87.5 110mm dia pipe clip 110mm dia providing and fixing granite stone slab mirror polished and machine edge cut in walls, pillars, steps, shelves, sills counters, floors etc. laid on 12mm (av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.green / blackabove 3601 cm2 slabs providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to is : 13753 & is :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). "part-b (sanitary work) based on bsr pwd - 2014, dausa circle p & f kitchen & lab. sink of approved make with c.i. brackets duly painted, 40 mm c.p. waste coupling, c.p. brass chain with rubber plug, 40 mm g.i. waste pipe up-to floor level complete including cutting and making good the wall & floor :wvc lab sink (is:2556 mark) size 530 x 430 x 180 mm " p & f chromium plated swan-neck laboratory cock of approved quality / make:one way p & f ball cock (is :1703 mark) with rod & p.v.c. ball complete :brass wt.400 gm,15mm. p & f inlet connection (angle valves) superior quality, of approved make, for wash basin, gyser etc. c.p. inlet connection 15mm.brass (is : 8931 marked) p & f 15 mm. dia connection pipe of approved quality/make :(-do-) 450mm. p & f full-way valve (is:778 mark) or wheel valve of approved make :gun-metal 15mm nominal bore. p & f stop cock (is :8931 mark), superior quality & of approved make:brass 400 gm. 15mm nominal bore. p & f pvc storage tank isi marked (is : 12701) indicating the bis license no), of approved make with cover, 25mm dia 1m long g.i. over-flow pipe & 25 cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 (-do-) p & f g.i. pipes (external work) with g.i. fittings excluding union (is : 1239 mark) including trenching & refilling earth etc.15mm dia nominal bore'b' class p & f g.i. pipes (external work) with g.i. fittings excluding union (is : 1239 mark) including trenching & refilling earth etc.25mm dia nominal bore 'a' class construction of soakage well in all types of soil of approved drawing, top 90 cm .portion in 450mm thick masonry with cm 1:6, 80 mm thick stone slab covering, jointing of slab in cm 1:3 ,ralthal, kharanja 40mm thick m-15 grade c.c flooring, earth work etc . complete including disposal of surplus earth within a lead of 50 mtr . inner dia 90 cm & 10 to 12 mtr deep. "part-c (electric work) based on bsr pwd 2013, jaipur circle wiring of light point/fan point/exhaust fan point/ call bell point with 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is: 694) of approved make group-2 light point short point (up to 3 mtr.)" medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3 pin 5 amp. light plug point with 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is: 694) of approved make in surface/reces group - on board s & f follwing sizes (dia.) of isi marked medium duty pvc conduit along with accessories in surface/ recessed using clamps, fastener as required including cutting the wall , covering conduit with wire mess and making good the same as required. group-2 25 mm dia "supplying and drawi;ng fr pvc insulated & unsheathed flexible copper conductor isi marked (is:694) of 1.1 kv grade and approved make in existing surface ofr necessed conduit/ casting capping including making connections etc. as required. group-2 2 x 1.5 sq. mm" 2 x 2.5 sq. mm p & f 240/415 v mcb of breaking capacity not less than 10 ka (b/c/d tripping characteristic) isi marked is 8828 (1996)/conforming to iec 60898 in existing board/ sheets including making connections with lugs, testing etc. as required. group-2 6 a to 32 a rating p & f recessed/ surface mounting heavy duty horizontal type sheet steel distribution board phophatised/ powder painted complete with 100 amp copper copper bus bar, shorting link, neutral, earth link and din bar, conforming to is 13032 & is 8623 including making internal db termination with copper lux, testing etc. as reqd. . group-2 single door(single phase) 8 way p & f strip fluorscent tube fitting fabricated from (crca sheet and finished with powder coating/stove enamelled non corrosive uv resist ep channel) complete with accessories(low loss copperchoke, starter, starter seat)/electronic choke with terminal block duely prewired with copper conducter including making connection, testing etc. as required(without tube)1x36 watts with occb. group-2 p & f fluorscent tube rod in existing fixtures as required, minimum 3 star rating,36/40 watts p & f star rated double ball beari;ng capacitor start, aluminium body and blade ceiling fan with down rod upto 30 cm with 3x1.5 sqmm pvc insulated flexible copper conductor making connection testing etc as required.1200 mm sweep 3 star rated p & f is:371 marked 6 amp sufface type celling rose inculuding making commection testing etc. grup-2 (e071400) p & f isi marked 6 amp bakelite batten/ angle holder including making connextion testing etc as required p & f 18 swg ms recessed fan box, hexagonal/round of size 130mm dia, depth 75 mm , 12mm dia rad fan hook with 100mm length extended on eeach side. gourp-1 p & f 18 swg sheet steel boxes duly finisded with two coats of red oxide and with earthing terminal of following sizes (nominal size) on surfacae or in recessed as required. 175 mmx 100 mmx60 mm

State Government

TRN :35558010 | 16 Oct, 2025

Tender Value : 2.80 Crore

Bikaner - Rajasthan

Tender for excavation in cutting in soil by manual means with lead upto 50 m excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per morth specification clause 301.3 carriage of earth sand line murom with all leads construction of granular sub-base by providing well graded material, spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per morth specification clause 401. for grading iii material providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening & binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 1 as per morth specification clause 404. by mechanical means providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per morth specification clause 404. using crusher borken aggregate by mechanical means providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503. providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base (wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502 providing and laying bituminous concrete with 100-120tph batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder minimum @ 5.2 & 5.4 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specifications clause 507 complete in all respects for grading-i (19 mm nominal size) bitumen (vg-30) providing and laying dense graded bituminous macadam with 100-120 tph batch type hmp producing an average output of 75 tones per hour using crushed aggregates of specified grading, premixed with bituminous binder minimum @ 4.0 & 4.5 percent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specifications clause 505 complete in all respects. bitumen (vg-30) grading - i (37.50 mm (nominal size)) marking centre line and stop lines etc. on road as per irc pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" c with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements. excavation in cutting in soil by manual means with lead upto 50 m excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per morth specification clause 301.3 providing and laying in position cement concrete including curing, compaction etc complete in specified grade excluding the cost of centering and shuttering- all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). construction of un-reinforced, plain cement concrete pavement m30 (grade), thickness as per design, over a prepared sub base, with 43/53 grade cement as per clause 602, coarse and fine aggregates conforming to is:383, maximum size of coarse aggregate not exceeding 31.5 mm, mixed in a in fully automatic batching plant and transported to site in transit mixer for having continuous agitated mixer, manufactured as per approved mix design including pumping of r.m.c. from transit mixer to site of laying , with all lead and lift including cost of admixtures in recommended portion as per is 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer in charge laid with a fixed form paver (laying and fixing of 150 micron thick polythene film and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days using water finishing to lines and grade as per drawing and morth specification clause 602 including vaccum dewatering process with all required equipments (dowel bars will be paid seprately). providing and laying of paver block as per is 15658 : 2006 (indian standard for precast concrete block for paving- specification) and irc : sp:63-2004 (guidelines for the use of interlocking concrete block pavement) m-40,80mm thick to be used in medium- traffic ( medium traffic is defined as a daily traffic of 150-450 commercial vehicles exceeding 30 kn laden weight, or an equivalent of 0.5 to 2.0 msa for a design life of 20 years.) like city streets, small and medium market roads, low volume roads, utility cuts on arterial roads, etc category a denated units to key into each other on four faces zigzag shape as per irc sp 63:2004

Search Other Industries

List of minerals Tenders

Tender for construction of community hall near shiv temple, w.no.1 vill. chak bana pyt. chak bana part ii pyt.chak bana block bishnah under capex ddc for the financial year 2025-2026. block level

Tender for construction of lane with protection work from sagar mal to primary school at p.s pura at pyt. chorli block bishnah under capex pri for the financial year 2025-2026. block level

Tender for construction of drain from main road to h/o amar nath ward no 5 baba fareed nagar sehora a block bishnah under capex pri for the financial year 2025-2026. block level

Tender for gem bids for enamel, synthetic, exterior (a) undercoating (b) finishing (v4) confirming to is 2932 (q3)

Get Minerals Tender Alert...

Search Other Industries

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us