Filters

List of angle Tenders

List of latest angle Tenders in Indian Tenders. Click on any angle Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for angle Tenders.

All-Tenders (233)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Government Departments

TRN :49019145 | 13 May, 2025

Tender Value : 0

Noapara - West Bengal

Tender for auction sale of ru m.s item (heavy melting scrap) i.e iv cupler, iron head dumpy leble theodolite, ferrous part of door, actuatur for ngef & bhel, c track push back unit, puller, center pivot pin, brake beam inner, break bim outer, bresk bim for tc, gesr box cover, schaku coupler centering device, double acting hydraulic shock absorbers, set of pin for bogie brake, fexible hose cupling complete for brake, spindle of actuator push back unit, eot crane ladder, boggie assembly misc ferrous, motor suspension tube, complete ground fitting for point machine, vertical damper air spring suspension, fire lighting equipment, lateral damper, rail insulater cape, gear box, b.bim, b.b hanger, youke, pul rods, s.s angle, m.b . sandwich mounting assembly, hardware and fastner, iron bed cot, tawa, parts of sanku cuppler, pinion, inlet and out let hood, driver sit etc also attach with negligible rubber.

Central Government/Public Sector

TRN :49019171 | 13 May, 2025

Tender Value : 0

Chennai - Tamil Nadu

Tender for auction sale of pl no. 98090800 ferrous scrap consisting of condemned and unserviceable coach cut up parts, carriage partitions, body part pillars, turn under, tubes, panel sheets, side wall cutups with hand rail,trough floor sheets, foot steps, vestibule foot plate, cut bits of angle / channel /pipes/ plates, partition frame with weld mesh, plates cutups, t channel cutups, corroded sliding door, corroded under frame cutups with foot step, center pivot housing cutups, regulator frame cutups, battery box frame /channel cutups, door handle, angle/ channel/ flat less than 4 feet, shutters, pipes, corroded chequered plate, sheet, roof ventilators, corroded under frame cutups, cut parts of vrla boxes, luggage frames cutups, window grills, luggage frames, seat frames, chequered plate cutups, eft box, battery box cutups, panel frame cutups, luggage frame without wood [ wood removal permitted], seat frame without wood [wood removal permitted], emergency window grills, rolling shutters,dash pots of sorts and sizes and similar items bazaar in nature. note: if any non-ferrous items available in the lot should be returned to railways by the purchaser.

Central Government/Public Sector

TRN :49019209 | 13 May, 2025

Tender Value : 0

Chennai - Tamil Nadu

Tender for auction sale of condemned and unserviceable unreleased stores yard nissan shed attached with ms sheet/angle/channel/nut/bolts and other similar items in nature with or without original attachments. total qty.- 15.800 mts, not for sales:- (1)ds?8 793732 dt. 08.03.25 and all type of non ferous and wooden items available inside shed ground level . (2)the material not belongs to the above mention ds-8 no. should be treated as nfs. note:-[1] delivery to be made on actual weighment basis [2] crane /manual loading and cutting is permitted (3)purchasers should survey the material for road approach, location and qty before bidding to the lot (4) if material is excess at the time of weightment return to the custodian on same location. (s.1539) no.793731 dt: 06.03.2025 pl no. 98057054, hsn code: 72044900. custodian: sse/works/vm.

corporations/Associations/Others

TRN :49019429 | 30 May, 2025

Tender Value : 0

Tuticorin - Tamil Nadu

Tender for supply of iron and steel materials for unit i ii and iii primary air secondary air duct flue gas ducts airpreheaters and esp , supply of iron and steel materials for unit i, ii & iii primary air, secondary air duct, flue gas ducts, airpreheaters & esp , m.s. angle 50x50x6 , m.s. angle 65x65x6 , m.s. channel 100x50x5 , m.s. channel 150x75x5.7 , m.s. channel 200x75x6.7 , fin flat 25.4 x 6 mm. thick

State Government

TRN :49019508 | 21 May, 2025

Tender Value : 0

Chavara - Kerala

Tender for supply of structural steel - 7 mt supply of structural steel , heading1 , item code : 330117261 angle equal ms as per is 2062, size 75 x 75 x 8 mm. make: sail/ jsw /jindal steel power/ vizag/ tata. , item code : 330117362 angle equal msis 226/2062, size: 100 x 100 x 10 mm.length shall be approximately 6 metres make: sail/ jsw /jindal steel power/ vizag/ tata. => limited

State Government

TRN :49019699 | 14 May, 2025

Tender Value : 3.82 Lacs

Lucknow - Uttar Pradesh

Tender for tender for work of supply and installation of open gym equipment in park main area of ??gomti nagar extension scheme sector-1 park view apartment - chest pressdimensions: product area :3.6 ft x 2.8 ft safe play area :7.6 ft x 6.8 ftfunctions: strengthens glutes, chest, shoulder,upper & mid abs, fore arm & tricepstechnical specifications:center frame : 100 nb gi c-class pipe-jindal makemain frame : 40 nb & 32 nb gi b-class pipe -jindal makehandle frame : 32 nb & 25 nb gi b-class pipe -jindalmakeconnecting pipe : 32 nb & 25 nb & 40 nb gi b-class pipe -jindal makeseat & back rest: lldp rotomoulded seat with inbuiltbolts 3/8 x 1.5.pipe cap: galvanised cap.bearing systems: self locking bearing systems. itwill restrict its movement in 120° angle.bearing housing and pin :seamless pipe & round barbearings : reputed make (fag/skf)nut bolts: galvanised nut boltsnut bolts cap: nylon 66 injection moulded with ss m6fastners.powder coat: done by first coat of primerbrand 40-50 micron thickness and top coat of purepolyester powder with 70- 80 micron thickness. totalthickness is 110-120 micron complete in all respect as directed by engineer-in-charge 3 cycledimension:product area : 3.2 ft x 2.2 ftsafe play area :7.2 ft x 6.2 ftfunctions: strengthen upper & lower limb,improves body consistency & egibility, improvelungs & heart efficiency and strengthens heart.technical specifications:main frame : 25 nb & 40 nb gi b-class pipe -jindal makeseat frame : 32 nb gi b-class pipe -jindal makehandle & seat: lldpe stering is usedpipe cap: galvanised cap.bearing housing and pin :seamless pipe & round barnut bolts: galvanised nut bolts.bearings : permanent sealed of reputed make (fag/skf)powder coat: done by first coat of primerbrand 40-50 micron thickness and top coat of purepolyester powder with 70- 80 micron thickness. totalthickness is 110-120 micron complete in all respect as directed by engineer-in-charge. 4 pull up stationdimensions:product area : 4 ft x 3.4 ftsafe play area : 8 ft x 7.4 ftfunctions: strengthen abdominal and upper thighalso improves reflexes and mind bodyinteraction.technical specifications:main frame: 100 nb c-class g.i. pipes. -jindal makeback rest: detachable with 25nb gi b-class with specialcasing-jindal makehandle: 25 nb gi b-class pipe. -jindal makeconnecting main horizontal pipe: 50 n b gi b-classpipe -jindal makeintermidiate pipe: 25 nb gi b-class pipe. -jindal makepipe end cap: galvanised cap.powder coat: done by first coat of primerbrand 40-50 micron thickness and top coat of purepolyester powder with 70- 80 micron thickness. totalthickness is 110-120 micron complete in all respect as directed by engineer-in-charge. 5 air walkerdimensions:product area :4.8 ft x 2.1ftsafe play area :8.8ft x 6.1ftfunction: strengthens leg muscles, improvescardio vascular endurancetechnical specifications:main frame: 100 nb gi c-class pipe-jindal makeleg frame: 32 nb gi b-class pipe-jindal makehandle frame: 25 nb gi b-class pipe –jindal makefoot rest: lldp rotomoulded seat with inbuilt bolts3/8 x 1.5.pipe end cap: galvanised cap.bearing housing and pin: seamless pipe & round barbearing systems: self locking bearing systems. itwill restrict its movement in 120° angle.nut bolts: galvanised nut bolts.bearings: permanent sealed of reputed make (fag/skf)powder coat: done by first coat of primerbrand 40-50 micron thickness and top coat of purepolyester powder with 70- 80 micron thickness. totalthickness is 110-120 micron complete in all respect as directed by engineer-in-charge. 6 twister three waydimensions:product area : daimeter 5.5 ftsafe play area : diameter 11 ftfunctions: strengthens abdominal muscletechnical specifications:main frame : 100 nb gi c-class pipe -jindal makehandle frame: 20 nb gi b-class pipe jindal maketwister disc: lldp rotomoulded seat with inbuilt bolts3/8 x 1.5.pipe cap: galvanised cap.bearing cap: nylon 66 injection moulded.bearing housing and pin: seamless pipe & round barnut bolts cap: nylon 66 injection moulded with ss m6fastners.bearings: permanent sealed of reputed make (fag/skf)nut bolts: galvanised nut bolts.powder coat: done by first coat of primerbrad 40-50 micron thickness and top coat of purepolyester powder with 70- 80 micron thickness. totalthickness is 110-120 micron complete in all respect as directed by engineer-in-charge. 7 parallel bar doubledimensions:product area : 7 ft x 2 ftsafe play area : 13 ft x 4 ftfunctions: strengthens arms and shouldermusclestechnical specifications:parallel bar: 25nb gi pipe b-class isi markclamps : nylon 66 injection moulded casingcentre pipe: 100 nb gi c-class pipe jindal makepipe cap: galvanised cap.bearing cap: nylon 66 injection moulded.bearing housing and pin: seamless pipe & round barbearings : reputed make (fag/skf)stopper: pu rod 50mm dianut bolts: galvanised nut bolts.powder coat: done by first coat of primerbrad 40-50 micron thickness and top coat of purepolyester powder with 70- 80 micron thickness. totalthickness is 110-120 micron complete in all respect as directed by engineer-in-charge. 8 rowerdimensions:product area : 4.7 ft x 2.5 ftsafe play area : 8.7 ft x 6.5 ftfunctions: strengthens back muscles, shoulderarm muscles and abdomen, also improves cardiovascular endurance.technical specifications:main frame: 80 nb gi b-class pipe jindal makeseat frame:50 nb gi b-class pipe -jindal makehandle frame:32 nb gi b-class pipe -jindal makepipe cap: galvanised cap.bearing cap: nylon 66 injection moulded.bearing systems: self locking bearing systems. itwill restrict its movement in 120° anglebearing housing and pin: seamless pipe & round barnut bolts: galvanised nut boltsbearings:permanent sealed of reputed make (fag/skf)powder coat: done by first coat of primer brand 40-50 micron thickness and top coat of purepolyester powder with 70- 80 micron thickness. totalthickness is 110-120 micron complete in all respect as directed by engineer-in-charge. 9 tai chi spinnerdimensions:product area : 3.3 ft x 2.5 ftsafe play area : 7.3 ft x 6.5 ftfunctions: improves shoulder & helps improveswrist aligilitytechnical specifications:main frame: 100 nb gi c-class pipe -jindal makehandle frame: 32 nb gi b-class pipe -jindal makespinning ring: lldp rotomoulding wheel.pipe cap: galvanised cap.bearing cap: nylon 66 injection moulded.bearing housing and pin:seamless pipe & round barnut bolts: galvanised nut boltsnut bolts cap: nylon 66 injection moulded with ss m6fastners.bearings: permanent sealed of reputed make (fag/skf)nut bolts: galvanised nut bolts.powder coat: done by first coat of primerbrad 40-50 micron thickness and top coat of purepolyester powder with 70- 80 micron thickness. totalthickness is 110-120 micron complete in all respect as directed by engineer-in-charge. 10 abb trainerdimensions:product area : 5.7 ft x 2.1 ftsafe play area :9.7 ft x 6.1 ftfunctions: strengthen abdominal muscles andprevent lower back straintechnical specifications:• main frame is made up of 40 nb & 32 nb gi b classpipe• stiffener is made up of 25 nb gi b class pipe.• foot lock is made up 50 nb gi b class pipe• abb trainer top is made up of lldpe plastic• size of top will be 375 mm x 1150 mm x 40 mmthick complete in all respect as directed by engineer-in-charge. 11 (part-b) 12 1st year is defective liability period. 13 operation and maintanance of part-a 2nd year (2.5 % on part-a) 14 operation and maintanance of part-a 3rd year (3 % on part-a) 15 operation and maintanance of part-a 4th year (3.5 % on part-a) 16 operation and maintanance of part-a 4th year (4 % on part-a)

Government Departments

TRN :49019865 | 13 May, 2025

Tender Value : 0

Hathras - Uttar Pradesh

Tender for tender for the work of changes of damaged xlpe cable, poles & lines in m & r scheme which fallen due to different reason under edd-ii hathras - safe carriage of following material from electricty store center hathras to pit site of work through the kacha and pakka road includingloading and unloading at the respective ends including the cost of arrangement of labour, t&p, etc. which required for proper completion of work.(distance 00-50 kms.) 2 8.5 mtr. long pcc poles. 3 9/11 mtr. s.t. poles 4 11 kv x-arms, weasal conductor, g.i wire,disc insulators, pin insulators, clamps and otherrequired line material, if any. 5 11 kv xlpe cable 6 replacement of damaged 8.5 mtr. long pcc pole by digging of pits in kharanja/mettalic road and dismantling of all 11kv/lt accessories from the existing / damaged pole and errection of single new pole including fixing of all accessories with grouting. 7 replacement of damaged 9/11 mtr.long st pole by digging of pits in kharanja/mettalic road and dismantling of all 11kv/33 kv accessories from the existing / damaged pole and errection of single newstp pole including fixing of all accessories with grouting. 8 replacement offollowing damaged accessories in 11 kv /ltline - 9 11 kv x-arms, 11 kv pin insulators with pin &nut &bolt , f clamp 10 11 kv disc insulator with fiting 11 fixing of t. channel 12 errection and grouting of stays complete as per respo norms and as per direction of supervising engineer with grouting material i.e. cement, sand, brick ballast/stone ballast etc. shall be arranged by the contractor at his own cost. 13 laying, sagging and stringing and nozzling / binding etc. ofnew &old acsr weasal conductor / giin 11 kv / lt lines as per respo manual and as per direction of supervising engineer. 14 acsr weasel conductor 15 acsr dog / racoon conductor 16 laying of xlpe cableas per direction of supervising engineer 17 digging of proper size of pit for following work of damaged steel support with the provision of temporary support :-then reinforcement of steel support by welding of 04 nos. 2 feet long m.s. angle iron of 50x50x6 mm. at equal distance around each pole & also welding of these angle iron with each other by providing m.s. flat of size 35x6 mm. in round. 18 construction of round plinth around the s.t. poles / rs joists / rails will be done with cement, sand and concrete in 1:3:6 ratio of size 450 mm. dia & 600 mm height (300 mm. under the ground + 300 mm. the ground). the plinth should be plastered with ½ inch thick cement and sand of ratio 1:4 & taper rounding the upper most part of the plinth. the rate will include all cost of material, labour and t&p etc. for completion of the above work which will be provided by the contractor at his own cost.

State Government

TRN :49020042 | 13 May, 2025

Tender Value : 0

Kanpur - Uttar Pradesh

Tender for tender for annual repair to rawatpur colony type-iv servant qatar - dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. dsr -15.56 2 12 mm cement plaster of mixwith 1:6 (1 cement: 6 coarse sand) dsr 13.4.2 on wall. 3 12 mm cement plaster of mixwith 1:4 (1 cement: 4 coarse sand) dsr 13.4.1 on celling. 4 providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) nondecorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including isi marked stainless steel butt hinges with necessary screws.dsr-9.21.1 5 providing and fixing bright finished brass tower bolts (barrel type) withnecessary screws etc. complete :200x10 mm dsr9.74.2 6 providing and fixing bright finished brass door latch with necessary screwsetc. complete :300x16x5 mm dsr 9.75.1 7 providing and fixing isi marked oxidised m.s. sliding door bolts with nuts and screws etc. complete : (copper oxidized as per is: 1378) 300x16 mm dsr 9.62.2 8 providing and fixing bright finished brass handles with screws etc.complete: 125 mm dsr 9.81.3 9 providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete dsr 9.82 10 providing and fixing fly proof galvanized m.s. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. with second class teak wood beading 62x19 mm.dsr-9.51.1 11 removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. completedsr - 13.88 12 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.dsr-13.80 13 finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade old work (two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface dsr-13.112.1 14 finishing walls with water proofing cement paint of required shade .( old work one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of priming coat. ) dsr-13.109.1 15 distempering with 1st quality acrylic distemper (ready mixed) having voc (volatile organic compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour .dsr-13.81 16 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : one or more coats on old workdsr-13.99.1 17 providing and laying rectified glazed ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to is : 15622, of approved make, in all colours, shades, except white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding pointing the joints with white cement and matching pigments etc., complete. dsr-11.39 18 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding grouting the joints with white cement and matching pigments etc., complet size of tile 600x600 mm .dsr-14.41.2 19 providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20 mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of engineer-in-charge. with granite stone of area less than 0.50 sqm. dsr 16.86.1 20 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. concealed work, including cutting chases and making good the walls etc.15 mm nominal dia pipes . dsr 18.8.1 21 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply and all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. 25 mm nominal dia pipes . dsr 18.8.3 22 providing and fixing c.p. brass bib cock of pproved quality conforming to is:8931 : 15 mm nominal bore sor/dsr 18.49.1 23 providing and fixing c.p. brass long nose bib cock of approved quality conforming to is standards and weighing not less than 810 gms. 15 mm nominal bore sor/dsr 18.50.1 24 providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931 15 mm nominal bore sor/dsr 18.53.1 25 providing and fixing c.p. brass stop cock (concealed) of standard design and of approved make conforming to is:8931.15 mm nominal bore dsr 18.52.1 26 providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. white vitreous china wash basin size 630x450 mm with asingle 15 mm c.p. brass pillar tap dsr 17.7.2 27 providing and fixing water closet squatting pan (indian type w.c. pan ) with 100 mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. white vitreous china orissa pattern w.c. pan of size 580x440 mm with integral type foot rests dsr 17.1.2 28 providing and fixing white vitreous china pedestal type water closet (european type w.c. pan) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever requiredw.c. pan with isi marked white solid plastic seat and lid dsr 17.2.1 29 providing and fixing kitchen sink with c.i. brackets, c.p. brass chain with rubber plug, 40 mm c.p. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: 17.9.1 white glazed fire clay kitchen sink of size 600x450x 250 mm .dsr -17.9.1 30 providing and fixing t-iron frames for doors, windows and ventilators of mild steel teesections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of c.c. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).40x40x6mm@3.5kg/m . dsr 10.13.1 31 brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to is: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) . with f.p.s.(non modular) bricks .dsr-6.4.2 32 cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate dsr 11.3.1 33 providing and fixing p.v.c. low level flushing cistern with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete.10 litre capacity - white .dsr-17.18.1 34 providing and placing on terrace (at all floor levels) polyethylene water storage tank, is : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. dsr-18.48 35 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes.110 mm diameter dsr12.41.2 36 renewing glass panes, with wooden fillets wherever necessary:float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) dsr14.6.1 37 cleaning of chocked sewer line by diesel running vehicle mountinghydraulic operated high pressure suction cum jetting sewer cleaningmachine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 psi for sewer line from 150 mm dia upto 300 mm dsr 14.77 38 reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) dsr 5.2.2 39 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. thermo-mechanically treated bars of grade fe-500d or more.dsr 5.22a.6 40 centering and shuttering including strutting, propping etc. and removal of form work for : columns, piers, abutments, pillars, posts and struts.dsr 4.3.3

Government Departments

TRN :49020046 | 19 May, 2025

Tender Value : 0

Umaria - Madhya Pradesh

Tender for tender for item supply of building material; iron rebar tested isi mark 12 mm (per kg) 10 mm (per kg) 8 mm (per kg) 16 mm (per kg) 20 mm (per kg) cement isi mark 43 grade manger plant (50 kg) per bag gitti black tape 20 mm (per cubic meter) 40 mm (per cubic meter) sand (high quality) (per cubic meter) red brick pakka kumhari (per piece) (9x4x3) baked in bhatta brick fly ash (9x4x3) (per piece) strong dust (per cubic meter) mujham (per cubic meter) putti (20 kg) (per bag) white cement (20 kg) (per bag) steel gate grill etc iron sheet, angle iron and rectangular rod fabricated and including building (per kg) hollow m.s. pipe material, truss etc. fabricated and including building (per kg) u nails, open per kg gi wire, open per kg

State Government

TRN :49020061 | 13 May, 2025

Tender Value : 0

Kanpur - Uttar Pradesh

Tender for tender for annual repair to mc robertganj colony - dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. dsr -15.56 2 12 mm cement plaster of mixwith 1:6 (1 cement: 6 coarse sand) dsr 13.4.2 on wall. 3 12 mm cement plaster of mixwith 1:4 (1 cement: 4 coarse sand) dsr 13.4.1 on celling. 4 providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) nondecorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including isi marked stainless steel butt hinges with necessary screws.dsr-9.21.1 5 providing and fixing bright finished brass tower bolts (barrel type) withnecessary screws etc. complete :200x10 mm dsr9.74.2 6 providing and fixing bright finished brass door latch with necessary screwsetc. complete :300x16x5 mm dsr 9.75.1 7 providing and fixing isi marked oxidised m.s. sliding door bolts with nuts and screws etc. complete : (copper oxidized as per is: 1378) 300x16 mm dsr 9.62.2 8 providing and fixing bright finished brass handles with screws etc.complete: 125 mm dsr 9.81.3 9 providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete dsr 9.82 10 providing and fixing fly proof galvanized m.s. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. with second class teak wood beading 62x19 mm.dsr-9.51.1 11 removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. completedsr - 13.88 12 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.dsr-13.80 13 finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade old work (two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface dsr-13.112.1 14 finishing walls with water proofing cement paint of required shade .( old work one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of priming coat. ) dsr-13.109.1 15 distempering with 1st quality acrylic distemper (ready mixed) having voc (volatile organic compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour .dsr-13.81 16 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : one or more coats on old work dsr-13.99.1 17 providing and laying rectified glazed ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to is : 15622, of approved make, in all colours, shades, except white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding pointing the joints with white cement and matching pigments etc., complete. dsr-11.39 18 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding grouting the joints with white cement and matching pigments etc., complet size of tile 600x600 mm .dsr-14.41.2 19 providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20 mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of engineer-in-charge. with granite stone of area less than 0.50 sqm. dsr 16.86.1 20 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. concealed work, including cutting chases and making good the walls etc.15 mm nominal dia pipes . dsr 18.8.1 21 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply and all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. 25 mm nominal dia pipes . dsr 18.8.3 22 providing and fixing c.p. brass bib cock of pproved quality conforming to is:8931 : 15 mm nominal bore sor/dsr 18.49.1 23 providing and fixing c.p. brass long nose bib cock of approved quality conforming to is standards and weighing not less than 810 gms. 15 mm nominal bore sor/dsr 18.50.1 24 providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931 15 mm nominal bore sor/dsr 18.53.1 25 providing and fixing c.p. brass stop cock (concealed) of standard design and of approved make conforming to is:8931.15 mm nominal bore dsr 18.52.1 26 providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. white vitreous china wash basin size 630x450 mm with asingle 15 mm c.p. brass pillar tap dsr 17.7.2 27 providing and fixing water closet squatting pan (indian type w.c. pan ) with 100 mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. white vitreous china orissa pattern w.c. pan of size 580x440 mm with integral type foot rests dsr 17.1.2 28 providing and fixing white vitreous china pedestal type water closet (european type w.c. pan) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever requiredw.c. pan with isi marked white solid plastic seat and lid dsr 17.2.1 29 providing and fixing kitchen sink with c.i. brackets, c.p. brass chain with rubber plug, 40 mm c.p. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: 17.9.1 white glazed fire clay kitchen sink of size 600x450x 250 mm .dsr -17.9.1 30 providing and fixing t-iron frames for doors, windows and ventilators of mild steel teesections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of c.c. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).40x40x6mm@3.5kg/m . dsr 10.13.1 31 brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to is: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) . with f.p.s.(non modular) bricks .dsr-6.4.2 32 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in:: cement mortar 1:6 (1 cement : 6 coarse sand)dsr 6.1.2 33 cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate dsr 11.3.1 34 providing and fixing p.v.c. low level flushing cistern with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete.10 litre capacity - white .dsr-17.18.1 35 providing and placing on terrace (at all floor levels) polyethylene water storage tank, is : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. dsr-18.48 36 earth work in excavation by mechanical means (hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m,as directed by engineer-in-charge. all kinds of soil dsr 2.6.1 37 1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). dsr 4.1.8 38 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes.110 mm diameter dsr12.41.2 39 renewing glass panes, with wooden fillets wherever necessary:float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) dsr14.6.1 40 cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 psi for sewer line from 150 mm dia upto 300 mm dsr 14.77 41 reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) dsr 5.2.2 42 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. thermo-mechanically treated bars of grade fe-500d or more.dsr 5.22a.6 43 centering and shuttering including strutting, propping etc. and removal of form work for : columns, piers, abutments, pillars, posts and struts.dsr 4.3.3

Related Searched Keywords : angle

List of angle Tenders

Get angle Tender Alert...

Related Searched Keywords : angle

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us