Filters

List of bar Tenders

List of latest bar Tenders in Indian Tenders. Click on any bar Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for bar Tenders.

All-Tenders (405)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :49020506 | 31 May, 2025

Tender Value : 0

Bengaluru - Karnataka

Tender for supply of rescue shoring items as per department technical specification - rescue shoring items--1 a mechanical strut with self-retaining thread, plunger with thread. when the plunger is extended the thread shall be self-retaining. the axial displacement per rotation shall not be more than 17 mm. it shall have female snap-lock system on both sides retracted length shall not be less than 250 mm, stroke : 120 mm and weight : 3.5 kg 2 strut with hydraulic single acting cylinder with spring return and a plunger with thread and lock nut. the axial displacement per rotation shall not be more than 17 mm. it shall have female snap-lock system on both sides working pressure : 720 bar / 72 mpa retracted length : 575 mm stroke : 252 mm weight, ready for use : 9.2 kg force at working pressure : 100 kn/10.1 t 3 strut with pneumatic single acting cylinder with spring return with plunger with automatic locking mechanism that locks in steps of 9 mm. retracting the plunger shall be possible only after releasing the locking mechanism. it shall have female snap-lock system on both sides working pressure : 8 bar / 0.8 mpa retracted length : 632 mm stroke : 252 mm weight, ready for use : 8.4 kg force at working pressure :4 kn/0.4 t 4 a suitable hydraulic pump shall be provided for using the hydraulic strut. the pump shall be fitted with a pressure gauge 0-720 bar with rubber protection cover and with 3 m. hose and quick coupler. the pump shall be mounted on a wooden plate. working pressure : 720 bar / 72 mpa effective capacity oil tank : 700 cc output per stroke 1st stage : 11 cc up to 30 bar output per stroke 2nd stage : 2 cc up to 720 bar weight ready for use : 9.9 kg 5 extension pipe fitted with male snap-lock system on one side and female snap-lock system on the other side. length : 125 mm colour code : white weight : 1.5 kg outside diameter : 90 mm working load : 100 kn/10.1 t 6 extension pipe fitted with male snap-lock system on one side and female snap-lock system on the other side. length : 250 mm colour code : blue weight : 1.9 kg outside diameter : 90 mm working load : 100 kn/10.1 t 7 extension pipe fitted with male snap-lock system on one side and female snap-lock system on the other side. length : 500 mm colour code : yellow weight : 2.8 kg outside diameter : 90 mm working load : 100 kn/10.1 t 8 extension pipe fitted with male snap-lock system on one side and female snap-lock system on the other side. length : 1000 mm colour code : green weight : 4.6 kg outside diameter : 90 mm working load : 100 kn/10.1 t 9 a suitable connector with female snap-lock on both sides shall be provided to connect the male end of an extension pipe with one of the saddles weight : 1.4 kg outside diameter : 89 mm working load: : 100 kn/10.1 t 10 2-way block to support 2 tilting heads.. weight : 6 kg 11 3-way swivel head with 3 integrated swivel heads for use with up to 3 shoring lines in various directions. weight : 9.1 kg 12 support plate for use with the tensioning belts and cylinders or extension pipes,. the plate should support 3 swivel heads or a cross head and up to 3 tensioning belts. weight : 4.0 kg cross head 4 nos. weight : 1.1 kg 13 v-block small (aluminium block) to support on or against tubes. weight : 0.7 kg diameter : 89 mm 14 tilting head on plate with nailing holes in the plate for support on uneven or tilting surfaces. max. angle 45° in all directions. weight : 2.5 kg dimensions : 150 x 150 mm 15 swivel head mounted on a sphere to place the head in almost any position. weight : 2.0 kg 16 tilting head for support on uneven or tilting surfaces. max. angle 45° in all directions. weight : 2.5 kg, dimensions : 95 x 95 mm 17 v-block large (aluminium block) to support on or against tubes. weight : 1.7 kg opening x width : 141 x 100 mm 18 pointed head for support in narrow gaps weight : 1.2 kg diameter : 89 mm 19 cone head for support on or against hard concrete or steel surfaces. the point shall be of hardened steel to partially penetrate the surface and prevent the strut or extension pipe from sliding away weight : 0.5 kg diameter : 89 mm 20 flat head (round aluminium saddle) for support against a flat, soft surface like wood. 2 nos. weight : 0.3 kg diameter : 89 mm 21 hook wrench shall be adjustable to create a pre-load with the mechanical strut diameter : 90 mm tensioning belt 6 nos. weight : 1.4 kg length : 4.0 m width : 35 mm load : 10 kn/ 1 t 22 rope 5 mtrs long with carabine hook. to lower struts, or wrapping around the strut 23 flat head (saddle) for support against a flat soft surface like wood. the steel plate (150150 mm) shall have holes to nail the saddle to wood. weight : 0.8 kg dimensions : 150150 mm 24 beam support l-shape for support on or against very wide beams. the beam support shall have holes to nail it to wooden beams. weight : 1.0 kg 25 beam support 100 mm for support on or against upto 100 mm wide beams. the beam support shall have holes to nail it to wooden beams. weight : 1.2 kg 26 beam support 150 mm for support on or against upto 150 mm wide beams. the beam support shall have holes to nail it to wooden beams. weight : 1.7 kg 27 pressure reducer with air hose 2 m. with coupler suitable for both 200 and 300 bar air cylinders 28 double control unit for simultaneous operation of 2 tools with safety valves set at 8.5 bar and operation by means of push buttons with auto lock couplers 29 air hose length 10 metres colour blue with standard coupler on both sides. 30 air hose length 5 metres colour yellow with standard coupler on both sides. 31 anti-roll block made from flexible rubber to prevent struts and extension pipes rolling on uneven surfaces and protect against dirt and damage. 32 synthetic carrying / storage bag for struts and extension pipes. 33 storage / carrying bag for accessories

State Government

TRN :49020531 | 15 May, 2025

Tender Value : 0

Mangalore - Karnataka

Tender for short term re -tenders for the manufacturers/ dealers for the supply of chemicals/glassware/ consumables of reputed brands required for applied zoology department for a period of one year. - sodium bicarbonate -az,seliwanoff.s reagent -az,ammonium chloride 1-az,pbs 1-az,orcinol 3-az,methanol 4-az,maltose 1-az,hydrogen peroxide 1-az,gelatin 1-az,geimsas stain solution-az,fructose 1-az,ferric chloride 4-az,dmem 1-az,diphenylamine 3-az,dextrose 1-az,copper sulphate 1-az,calcium hydroxide 2-az,thiosemicarbazide 1-az,sucrose 2-az,sodium sulphate 3-az,sodium chloride 2-az,sodium azide 2-az,potassium permanganate 2-az,potassium iodide 1-az,phenyl alanine 4-az,phenopthalein indicator-az,phenol solution-az,ph buffer capsules .9.2 0.05.-az,ph buffer capsules .4.0 0.05.-az,benzene 1-az,whatman filter paprer cat no.1001.185-az,whatman filter paprer cat no.1001.150-az,whatman filter paprer cat no.1001.125-az,wbc diluting fluid-az,wagners reagent-az,trisodium phosphate -az,tris buffer-az,trichloro acitic acid.tca.-az,toluene -az,thiurea-az,sulphuiric acid -az,sulpho salicylic acid-az,sulphanilamide-az,starch-az,stanous chloride-az,sodium succinate-az,sodium potasssium tartarate-az,sodium phosphate dibasic dihydrate-az,sodium hydroxide-az,sodium di.hydrogen phosphate-az,leishman stain - az,isopropanol - az,indigo carmine - az,hypochlorite - az,hbss - az,haematoxylin - az,glycerol - az,food adulteration kit - az,ph buffer capsules . 7.0 0.05. - az,petroleum ether - az,perchloric acid - az,peptone-az,saline citrate-az,rpmi 1640 media-az,rbc diluting fluid-az,propionic acid-az,pottasium hydrogen phosphate.k2hpo4-az.,pottasium dihydrogen phosphate.kh2po4.-az,potassium hydrodide-az,potassium dihydrogen phosphate-az,potassium dichromate-az,pnpp.para.nitrophenly phosphate disodium.-az,pms.phenazine methosulfate-az.,pipette pump-az,phosphoric acid-az,nessler.s reagent - az,naphthyl ethylinediamine dihydrochloride reagent - az,n. butanol - az,mtt - az,methyl salycilate - az,methyl red indicator - az,merthyl orange indicator - az,megnesium sulfate - az,may grenwalds stain - az,lugol solution - az,dmem media-az,disodium hyderogen phosphate-az,dipottasium hydrogen phosphate-az,cylophosphamide-az,cupric chloride-az,creosote oil-az,creatinin - az,colchicine - az,cholestrol - az,cerrous ammonium sulphate - az,bromophenol blue - az,tolidine o - az,nitric acid .ar grade. - az,nin.hydrine - az,n.hexane - az,barfords reagent -az,aspartic acid-az,ascorbic acid-az,anthrone-az,anesthetic ether -az,ammonium sulphate-az,ammonium persulphate-az,ammonium metavandate-az,ammonium hydroxide solution-az,ammonium ferrous sulfate-az,amino acid kit-az,agarose-az,agar agar .bacteriological.-az,acetocarmine-az,dichlorofluorescein 2,7 -az,ferrous ammonium sulfate-az,ferroin solution .ar.-az,ferroin indicator solution-az,fbs -az,ethidium bromide -az,ethanol molecular biological grade-az,drosofila culture bottel -az,dpx moutant-az,dna isolation kit-az,dmso.dimethylsulfoxide.-az,beakers 3-az,beakers 2-az,beakers 11-az,test tube holder-az,spirit lamp-az,micro slides 2-az,micro slides 1-az,morter and pestile-az,glass droppers 2-az,watch glass 22-az,conical flask 33-az,conical flask 22-az,conical flask 11-az,measuring cylinder 77-az,measuring cylinder 66-az,measuring cylinder 55-az,measuring cylinder 44-az,measuring cylinder 33-az,measuring cylinder 22-az,measuring cylinder 11-az,borax-az,blotting paper-az,biurate reagent-az,benidicts reagent quantitative-az,benidicts reagent qualitative-az,blotting paper 01- az,tissue paper roll- az,alluminium foil - az,micro spin magnetic stirring bar 2 - az,lancet- az,buratte stand- az,test tube washing brush 1- az,insect catching net - az,hand gloves - az,test tube rack - az,beaker 05 - az,beaker 04- az,beaker 03- az,beaker 22- az,beaker 11- az,pipette pump 3- az,pasture pipette - az,embryo cup- az,watch glass 2- az,test tubes- az,beakers 8- az,beakers 7-az,beakers 6-az,beakers 5-az,beakers 4-az,measuring beaker with handle 3 - az,measuring beaker with handle 2- az,measuring beaker with handle 1- az,dropping bottle 2- az,dropping bottle 1- az,pipette bulb- az,handypette - az,coplin jar- az,wash bottle- az

Local Bodies

TRN :49020595 | 17 May, 2025

Tender Value : 0

Mandi - Himachal Pradesh

Tender for tender for supply of sand ceiling color stone stone (cut store) brick clay kiln soil cutting and breaker by cb machine material eplant (including unloading from somet sunaag) dector jeep gadhar gadhar & karsog to kakadadhar by other vehicles shuttering iron & wooden wooden, leigh & aluminium fittings & doors with ply board other filling lig pvc fair sheets leka ret pelling pvc hardware (barriers, signal bar, 6ting. pvc/hdpe container various siddhas, sanitary fittings & lavour rent etc.) colour coated roof sheet etc. ceiling sheets etc. solar street lights 9.12. war lights repair, high mask lights furniture items (all types of niche sewage mixer machine painter wall writing sandwich, pear plants authorized by horticulture department electrical fitting materials and services lcd bar, mike, computer.19, projector, etc. gas detergent stationery various items for sanitation management dalan, reservoir site chachar by horse cart wire span other materials to be used in panchayat work should be mentioned above.

State Government

TRN :49021140 | 28 May, 2025

Tender Value : 6.35 Lacs

Ballia - Uttar Pradesh

Tender for tender for supply and work for 02 nos. 33kv bays for jal jivan mission yojana at 132kv s/s dighar under etd, ballia. - laying and jointing pvc pipe. heading 2 supply-apgclamp suitable for moose to panther 3 pgclamp suitable forpanther to panther 4 phase plate (r,y,b phase ) 5 copper bond 6 led street light limiaire type sl-l19 45w) 7 40mm dia ms electrod of 3 meter length 8 40mm dia ms round bar 9 single tension fitting for acsr panther conductor 10 70 kn disc insulator 11 g.i nut &boltwith washer 16x40 mm 12 g.i nut &boltwith washer 16x45 mm 13 g.i nut &boltwith washer 16x50 mm 14 work -bsorting counting and loading for carriage of substation structure (8.00 mt) from efu naini prayagraj to 132kv s/s dighar 15 carriage of substation structure fromefu naini to 132kv s/s digharapproxdistance (8mt x 330=2640 ) 16 unloading and stacking of g.i structure at 132kv s/s dighar 17 erection of main and auxiliary structure by shifting of structure from store to work siteas per relevant drawing and practices using nut - bolt and spring washers .the material shall be supplied by department free of cost but the contractor has to managet&p and all other associated work to complete the job satisfactory. 18 stringing of 33 kv transfer bus bar ( r, y & b phase ) with acsr single pantherconductor including cutting, bending and clamping fitting of tension clamp with all associated accessories, hoisting of insulator string after shifting of material from store to worksite and all other associated work to complete the work satisfactory. 19 erection of following equipments as per instruction manual of various equipments and technical specification including shifting of material from store to work site includig all other associated work to complete the job satisfactory.30 kv la 20 36 kv ct 21 junction box for 36 kv ct 22 36 kv vcb 23 36 kv bsi 24 36kv lsi 25 33kv tripple feeder control & relay panel 26 dismantling of old tripple feeder panel for proper space for new panel including disconnection ofcontrol cable 27 erection of abt energy metering panel with 2nos abt meter 28 jumpering of equipments using single/double panther/zebra/moose conductor from bus bar to isolators,cb,ct,la, etc 29 laying of follwing size control cables from control & relay panels to various equipment junction boxes etcin switchyard as per cable schedule, its binding at every 1.5 mtr. distance with m.s. saddle including carriage of cable from store to work site and shifting back to store and all associated works to complete the job satisfactorily.2c x 2.5 sq. mm 30 4cx 2.5 sq. mm 31 6cx 2.5 sq. mm 32 termination of above cable as per cable schedule including making necessary holes in gland plates of boxes where ever required including supply and fixing of cable glands of approxinmate size and to provide ferrules and nos. for each core of cable and its termination with all the other associated works to complete the job. 33 delta earthing of 30 kv la consisting of 06 nos 3 meter long electodes its placing inside the ground and connecting all three electrodes with 75x10 mm ms flat and connecting the same with laat two place required including cost of m.s stripexcluding cost of m.s round bar 34 earthing ofmain & auxiliary structure and various type equipments (ct, cb, la, lsi, bsi etc ) by m.s strips by cutting to proper size, digging of earth from ground level to earthmat then proper welding as per drawing and leveling earth. painting of m.s strips of one coat red oxide primer and two coat with green colourand all associated work to complete the job satisfactory . m.s flat will be provided by the contractor.50 x 6 mm 35 25 x 6 mm 36 layingof 40 mm dia. round bar 700 mm below ground level including cutting straightening ,welding painting excavation of earth in trench from back filling after completion of work with all other associated work to complete the job satisfactory ,excluding cost of 40mm dia round bar. 37 fabrication of3 meter long electrode with 40 mmms round bar having 150 mm conical shape and then its piercingvertically inside the ground with top 700 mm below ground level and its welding exluding cost of 40 mm dia. round bar 38 providing and fixing of name plate made of 2mm thick aluminium sheet of 3m hip retro reflective sheeting plkates to be fixed with help of nut and bolts of istalled equipment structure of 400mm*250mm size 39 loading/unloading and carriage of 02nos 36kv vcb with structurefrom 132kv s/s sikandarpur to 132kv s/s dighar including loading at 132kv s/s sikndarpur by crane and unloading at 132kv s/s dighar by crane , men ,t&p, vahicle , crane arranged by contractor at own his cost

Government Departments

TRN :49021216 | 14 May, 2025

Tender Value : 29.76 Lacs

Mirzapur - Uttar Pradesh

Tender for tender for construction work of bar bhawan in nav yuvak advocate samiti tehsil complex chunar - clearing jungle including up rooting of rank vegetation grass bush wood trees and sapling of girth upto 30cm. measured at a height of 1 meter above ground level and removal of rubbish upto a distance of 50m. outside the periphery of area cleared as per si.no. 2.31 2 earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. all kinds of soil as per si.no. 2.8.1 3 excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. (under floor) as per si.no. 2.25 (a) 4 supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. as per si no 2.27 5 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:4:8 (1 cement : 4 coarse sand (zone-lll) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) as per si no. 4.1.8 6 brick work with common burnt clay (non modular) bricks of class -150in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand) as per si no- 6.1.2 7 providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level in :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) as si no-5.1.2 8 providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand (zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) upto plinth lvl as si no-5.1.2 9 reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)above plinth lvl as si no-5.2.2 10 providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand (zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) upto plinth lvl as si no-5.1.2 11 reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources). above plinth lvl as si no-5.3 12 reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). as per si no. 5.3 13 reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (slab) as per si no. 5.3 14 steel reinforcement for r.c.c. work ready to use cut and bend rebars of approved make from factory/workshop to construction site including placing in position and binding all complete in thermo-mechanically treated bars of grade fe-500d or more. as per si. no.- 5.22 b.1 15 brick work with common burnt clay bricks of m-150 class in super structure above plinth level upto floor v level in all shapes and sizes in cement mortar 1:6 ( 1 cement : 6 coarse sand ) as per si no 6.4.2 16 steel work welded in built up sections / framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc.in grantings, frames, guard bar, ladder, railing, brackets, gates and similar works as per si no. 10.25.2 17 providing and fixing angle iron frames for doors, windows and ventilators of mild steel angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing t-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of engineer-in-charge. m.s. angle 35x35x5 for door frames as per si no. 10.31 18 12 mm thick cement plaster of mix 1:6 ( 1 cement & 6 course sand ) outer side as per is 13.4.2 19 cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone ) finished with floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. 40 mm thick floor 20 mm nominal size stone aggregate. as si no. 11.3.1 20 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture as per sl no. -13.62.1 21 distempering with 1st quality acrylic distemper (ready mixed) having voc content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : new work (two or more coats) over and including water thinnable priming coat with cement primer having voc content less than 50 gram/litre as per sl no. -13.41.1 two coats 22 finishing walls with acrylic smooth exterior paint of required shade: new work (two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) as per sl no. -13.46.1 two coats 23 centering and shuttering including stutting, propping etc. and removal of form.beam /band as per si- 5.9.5 24 centering and shuttering including stutting, propping etc. and removal of form.column as per si- 5.9.6 25 centering and shuttering including stutting, propping etc. and removal of form.foundation as per si- 5.9.1 26 centering and shuttering including stutting, propping etc. and removal of form.slab as per si- 5.9.3

Local Bodies

TRN :49021556 | 16 May, 2025

Tender Value : 21.17 Lacs

Hathras - Uttar Pradesh

Tender for tender for cc work from nagla khushali marg to lakhanu pura marg ambedkar park in village panchayat lakhanu - clearing & grubbing road land including uprooting wild vegetation grass bushes shrubs sapling and trees of girth up to 300 mm 2 construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5(widening of patari) 3 excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5m and lead upto 50m as per technical specification clause 302.3 4 providing concrete for plain concrete in open foundation complete as per drawings and technical specification clause 802,803,1202 &1203 5 plane/reinforced cement concrete in substructure complete as per drawings and technical specification clauses 802,804,805,806,807, 1202&1204 6 supply, fitting and placing with ms bar rainforcement as per drawings and technical cpecification clause 1002, 1010 and 1202 7 construction of granular sub-base by providing well graded material, spreading in uniform layers with tractor mountedgrader on prepared surface mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401. 8 providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405. 9 construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 m30 (grade), coarse and fine aggregates conforming to is:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, 10 supply and fixing of information board

Local Bodies

TRN :49021604 | 16 May, 2025

Tender Value : 8.11 Lacs

Hathras - Uttar Pradesh

Tender for tender for drain construction work in village nagla kehria - earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out construction of shoring and bracing, removal for stumps and other deleterious material and disposal up to a lead of 50mm dressing of side and bottom and back filling in the trenches and excavated suitable material. 2 providing concrete for plain concrete in open foundations complete as per drawing and technial specifications clause 802,803,1202 &1203 (norminal mis (1:3:6)) 3 plane/rainforce cement concrete in substructure complete as per drawings and technical specifications clauses 802,804,805,807,1202 &1204 rcc grade m25 (substructure) 4 supply ,fitting and placing tmt bar reinforcement (fe415)in substructure complete as per drawings and technical specification clauses 1002,1005,1010 & 1202. 5 supply and fixing of information board

corporations/Associations/Others

TRN :49022093 | 13 May, 2025

Tender Value : 0

Pune - Maharashtra

Tender for providing basic facilities for various vocational training centers of the pune municipal corporation social development department.=1. 2. 3. non comprehensive maintence contract of computer with all neccsa supplying accessories, servicing & software data loading as f instruction by dept. stitching machine headphones with mic with 3.5 mm drivers, in-built noise cancellir foldable and adjustable - driver size 40mm 4. 5. 6. speaker impedance - 32 ohm frequency response-20hz-20khz microphone impedance-1.2k ohm 7 sensitivity-105db microphone sensitivity = -58db+2db connector type dual 3.5mm jack cable length-1.8m package dimension - 168 x 90 x 200 mm warranty - 1 year usb 3.0 desktop ram - item height-13.3 centimeters item width-0.1 inches ram size 8 gb memory technology- ddr3 computer memory type ddr3 sdram memory clock speed - 1600 mhz voltage - 1.5 volts wattage-1.2 warranty 1 years web camera for desktop dsp chip: driverless image sensor: cmos lens: sp lens digital zoom: 4x zoom digital video format: mjpg, yuy2 wide angle: 85-90 degree lens: superior quality glass lens dynamic resolution: 1280x720p frame rate: 30fps (usb2.0) line length: 140cm system support: windows xp/vista/7/8/10 warranty 1 years solid state drive interface nvme (pcie gen 4 x4) ssd endurance (tbw) 300tb form factor m.2 (2280) 5sd series 1500 capacity 500gb sequential read-7200 mb/s sequential write-5700 mb/s warranty 3 years mouse optical tracking dpi (min/max): 1000± number of buttons: 3 (left/right-click, middle click) line-by-line scrolling 8. 9. keyboard spill-resistant design 10-key number pad caps lock indicator light num lock indicator light up to 10 million keystrokes (excludes number lock key) key type: deep profile black plastics: 51% post-consumer recycled material product carbon footprint: 4.02 kg co2e 3-year limited hardware warranty warranty 1 years pen drive - 64gb flash drive compatible with: laptops | desktops form factor: flash version: usb 3.0 password protection 60 months warranty new motor 1/16 hp novel / rajesh / navkar sewing machine table novel rajesh / navkar 10. 11. 12. pressure ta 1 novel / rajesh / navkar 13. datri novel / rajesh / navkar 14. needle plate novel / rajesh / navkar 15. shuttle japan novel rajesh navkar 16. needle bar novel / rajesh / navkar 17. tension set novel / rajesh / navkar 18. side plate novel / rajesh / navkar 19. wheel bush novel / rajesh / navkar 20. dollar novel / rajesh / navkar 21. needle packet novel / rajesh / navkar 22. stopper strip novel rajesh / navkar 23. oil can 90 ml novel rajesh / navkar 24. measuring tape novel / rajesh / navkar 25. bobbing case double part novel rajesh / navkar 26. bobbing case single part novel rajesh / navkar 27. badi novel / rajesh / navkar 28. kana ta1 novel / rajesh / navkar 29. 30. 297 check nut novel / rajesh / navkar 31. needle pliers novel / rajesh / navkar takeup lever novel / rajesh / navkar 32. tweezers novel / rajesh / navkar 33. connecting novel / rajesh / navkar 34. stop moshav novel / rajesh / navkar 35. stop wire novel / rajesh / navkar 36. pressure bar novel / rajesh / navkar 37. pressure bar piece - novel / rajesh / navkar 38. clock novel / rajesh / navkar 39. clock pin novel / rajesh / navkar 40. reverse lipter novel / rajesh / navkar 41. india gate novel / rajesh / navkar 42, daab nut novel / rajesh / navkar 43. wider novel / rajesh / navkar 44. face plate novel / rajesh / navkar - 45. chand thali novel / rajesh / navkar - 46. break set novel / rajesh / navkar 47. patra ta1 novel / rajesh / navkar

State Government

TRN :49022392 | 13 May, 2025

Tender Value : 31.44 Lacs

Gangapur - Maharashtra

Tender for providing electrical installation in, premises street light, water pump and fire extinguisher for the newly constructed zilla parishad primary health center (p .h .c)main building (g.f+f.f) [under scheme d.p.c. (general) year 2022-23, 34512595 construction expantion & m/ce & repairs of p.h.c/ phsc) at village,lasur stationtq. gangapurdist. chhatrapati sambhajinagar.= 1 supplying and erecting 25 mm dia. corrugated flexiblepolypropyleneconduit 2 supplying anderectingpvctrunking (pvccasing-n-capping)ofsize25 mm with accessorieson wall/ceiling as per specification no: wg-ma/con. 3 supplying anderectingpvctrunking (pvc casing-n-capping)ofsize20 mm with accessorieson wall/ceiling as per specification no: wg-ma/con. 4 supplying anderectingpvctrunking (pvccasing-n-capping)ofsize32 mm with accessorieson wall/ceiling as per specification no: wg-ma/con. 5 supplying anderectingpvctrunking (pvccasing-n-capping)ofsize40 mm with accessorieson wall/ceiling as per specification no: wg-ma/con. 6 supplying and erecting mains with 2x1.5 sq.mm frlshcopperpvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no: wg-ma/bw 7 supplying and erecting green earth wire 1x1.5 sq.mm frlshcopperpvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no: wg-ma/bw 8 supplying and erecting mains with 2x2.5 sq.mmfrlsh copper pvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no: wg-ma/bw 9 supplying and erecting green earth wire 1x2.5 sq.mmfrlsh copper pvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no: wg-ma/bw 10 supplying and erecting mains with 4x2.5 sq.mmfrlsh copper pvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no: wg-ma/bw 11 supplying and erecting mains with 2x4 sq.mm frlsh copper pvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no: wg-ma/bw 12 supplying and erecting mains with 4x4 sq.mm frlsh copper pvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no: wg-ma/bw 13 supplying and erecting green earth wire 1x4 sq.mm frlsh copper pvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no: wg-ma/bw 14 supplying and erecting mains with 4x6 sq.mm frlsh copper pvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no: wg-ma/bw 15 supplying and erecting pvc insulated pvc round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi strandedcopper industrial cable for voltage grade up to 1.1 kv 16 supplying and erecting pvc insulated pvc round sheathed 2.5 sq.mm (50 no. x 0.25 mm dia.) 3 core flexible multi strandedcopper industrial cable for voltage grade up to 1.1 kv 17 supplying and erectingceiling rose / batten holder / slanting holder / hanging cord switch / hanging bell push / pendant holder bakelite base 6a. erected on filled polypropylene board or polished double wooden block/ pvc junction box. 18 supplying and erectingmodular type switch 6a / 10a duly erected on provided plate and box with wiring connections complete. 19 supplying and erectingmodular type switch 16aduly erected on provided plate and box with wiring connections complete. 20 supplying and erectingmodular type bell-push with indicator 2 modules 6a / 10a, duly erected on provided plate and box with wiring connections complete. 21 supplying and erectingmodular type 3 pin 6amultisocket with safety shutter, duly erected on provided plate and box with wiring connections complete. 22 supplying and erectingmodular type 3 pin 6 / 16amultisocket with safety shutter,duly erected on provided plate and box with wiring connections complete. 23 supplying and erectingmodular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. 24 supplying and erecting modular type blanking plate one module, duly erected on provided plate & box. 25 supplying and erecting pvc surface modular switch box with double mounting plate for 2module duly erected. 26 supplying and erecting pvc surface modular switch box with double mounting plate for 3module duly erected. 27 supplying and erecting pvc surface modular switch box with double mounting plate for 6module duly erected. 28 supplying and erecting pvc surface modular switch box with double mounting plate for 12module duly erected. 29 supplying and erecting 16 / 20 / 25 a starter (modular range) 2 module for ac unit on provided box complete & duly concealed with necessary material and connected. 30 point wiring for light/bell/exhaust fan in pvc trunking (casing-capping) with 1.5 sq.mm (2+1e) frlsh grade copper wire, modular type switch, earthingand required accessories as per specification no: wg-pw/sw 31 point wiring for ceiling fan in pvc trunking (casing-capping) with 1.5 sq.mm (2+1e) frlsh grade copper wire, modular type switch, earthingand required accessories as per specification no: wg-pw/sw 32 wiring for plug on board withswitch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification no: wg-pw/cw 33 supplying and erectingled square / circular max. 11 w down lighter/panel light having pressure die-cast aluminium housing,polystyrene diffuser havingsystem lumens output of min. 1200 lumens, min. efficacy of 110 lumen/w, cri>80, cct upto 6500k, beam angle of 120 deg., max. ripple of 5%,thd<10%, p.f. >0.95, operating range of120-270v, surge protection of 2.5 kv, life class of 50,000 hrs. at l70b50,including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. 34 supplying and erectingled square / circular max. 14 w down lighter/panel light having pressure die-cast aluminium housing,polystyrene diffuser havingsystem lumens output of min. 1500 lumens, min. efficacy of 110 lumen/w, cri>80, cct upto 6500k, beam angle of 120 deg., max. ripple of 5%,thd<10%, p.f. >0.95, operating range of120-270v, surge protection of 2.5 kv, life class of 50,000 hrs. at l70b50,including driver,having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. 35 supplying and erectingled square / circular max. 18 w down lighter/ panel light having pressure die-cast aluminium housing,polystyrene diffuser having system lumens output of min. 2000 lumens, min. efficacy of 110 lumen/w, cri>80, cct upto 6500k, beam angle of 120 deg., max. ripple of 5%,thd<10%, p.f. >0.95, operating range of120-270v, surge protection of 2.5 kv, life class of 50,000 hrs. at l70b50, including driver,having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. 36 supplying and erectingledpanel light(600mm x 600mm) max. 30 whaving crca powder coated housing,polystyrene diffuser havingsystem lumens output of min. 3600 lumens, min. efficacy of 120 lumen/w, cri>80, cct upto 6500k, beam angle of 120 deg., max. ripple of 5%,thd<10%, p.f. >0.95, operating range of120-270v, surge protection of 2.5 kv, life class of 50,000 hrs. at l70b50including driver,having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. 37 supplying and erecting anodized aluminium corridor / passage / mirror light led fitting (2 feet) max. 12wwith high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/w, cri>80, cct upto 6000k, beam angle of 110 deg., ripple<5%,thd<10%,p.f. >0.95, operating range of200-270v, surge protection of 2 kv, life class of 50,000 hrs. at l70b50, including driver with end caps on provided pvc block / wooden board with 3 years warranty. 38 supplying & erecting inverter led batten 10w tube light fitting with polycarbonate housing, heat sink, integrated hf electronic driver, min. 2600 mah lithium ion battery with charging time of 8-10 hours and backup time of min. 3 hrs. with minimum 25% of initial watts having luminous efficacy of 100 lumen/watt,cri>80, cct of 6500k and thd<=20% havinguseful life of minimum 25000 hrs. with overheating protection with 2 years warranty. 39 supplying & erecting inverter led batten 20w tube light fitting with polycarbonate housing, heat sink, integrated hf electronic driver, min. 2600 mah lithium ion battery with charging time of 8-10 hours and backup time of min. 3 hrs. with minimum 25% of initial watts having luminous efficacy of 100 lumen/watt,cri>80, cct of 6500k and thd<=20% havinguseful life of minimum 25000 hrs. with overheating protection with 2 years warranty. 40 supplying and erecting ding dong / electronic musical type call bell with heavy duty coilsuitable to operate on 230v a.c. supply erected on polished double wooden block/sunmica block of suitable size. 41 supplying and erecting integrated led street light fitting26 to 30w ip65 & ik08 class having single piece pressure die-cast aluminium housing ,having system lumens output of min. 2600 lumens, min. efficacy of 100 lumen/w, cri>70, cct upto 6500k, thd<10%, p.f. >0.95, operating range of140-270v, inbuilt surge protection of 10 kv, life class of 50,000 hrs. at l70b50,including driver complete with 3 years warranty as per specification nofg-odf/fls2. 42 supplying and erecting integrated led street light fitting 40 to 50w ip65 & ik08 class having single piece pressure die-cast aluminium housing,havingsystem lumens output of min. 4400 lumens, min. efficacy of 110 lumen/w, cri>70, cct upto 6500k,thd<10%, p.f. >0.95, operating range of140-270v, inbuilt surge protection of 10 kv, life class of 50,000 hrs. at l70b50, including driver complete with 3 years warranty as per specification nofg-odf/fls2. 43 supplying and erecting integratedled street light fitting 100-110w ip65 & ik08 class having single piece pressure die-cast aluminium housing,havingsystem lumens output of min. 11000 lumens, min. efficacy of 110 lumen/w, cri>70, cct upto 6500k, thd<10%, p.f. >0.95, operating range of140-270v, inbuilt surge protection of 10 kv, life class of 50,000 hrs. at l70b50,including driver complete with 3 years warranty as per specification nofg-odf/fls2. 44 supplying & erecting integral post top lantern fixtures (mushroom type) suitable for led lamp upto 12 w consisting of clear acrylic top cover, cast aluminium pole cap complete with accessories on provided pole /bracket as per specification no. fg-odf/ptl 45 supplying and erecting street light wall bracket made from 40 mm. dia ‘ g.i. pipe 1.2 m. in total length complete as per specification no. fg-bkt/wb 46 supplying & erecting 3w, 230v integral type led lamp suitable for b-22 / e-27 base.(night lamp) 47 supplying and erecting regular/ standard model ceiling fan of 900 /1050 mm. sweep complete erected in position as per specification no. fg-fn/cf 48 supplying and erecting bracket fan 400 mm. sweep a. c. 230 volts 50 cycles 1350 rpm. oscillating type, plastic or metal blades chrome plated guard with speed regulator and moisture proof treatment to winding and with ‘e’ class insulation. 49 supplying and erecting fresh air cum exhaust fan of light duty 250 v a.c. 50 cycles 300mm. 1400 rpm rust proof body & blades, wire mesh, duly erected, complete. 50 supplying and erecting exhaust fan heavy duty 230 v a.c. 50 cycles 375/380 mm. 1400 rpm complete erected in position as per specification no. fg-fn/exf 51 supplying and erectingenergy saving ceiling fan 230 v a.c. 50 cycles 1200 mm complete erected in position as per specification no. fg-fn/cf 52 supplying and erecting fan hook of 10 mm. m.s. round bar grouted in rcc slab with making the site as original. 53 providing recess in brick wall suitable for erection of exhaust fan up to 450mm. sweep complete with grouting of nut, bolts, plastering and colour washing to match the colour of the wall for the wall thickness of 225 mm. 54 supplying & erecting 22 swg g.i sheet metal cawl sector shaped with 25 x 25 x 3 (mm) angle iron frame, metal mesh to avoid birds entry with necessary material, suitable for exhaust fan of 400 mm as per specification no fg-fas/msc 55 supplying and erecting midget type 3.0 litres instant type water heater of rustproof & shockproof abs plastic body, high grade ss inner tank & 3kw heating element with corrosion & hard water protection, with minimum 3 safety protections (i.e. thermostat & thermalcut-out, function valve) complete with 6.5 bar pressure withstanding capacity 230/250v, 50hz, a.c. supply with inlet and outlet, with 3 core pvc flexible copper wire leads duly tested and marking sr. no. and date of erection complete. 56 supplying and erecting chromium plated heavy duty brass stop cock for inlet pipe of water heater (15mm. dia). 57 supplying & erecting 15mm brass non return valve for inlet pipe of storage water heater. 58 providing fiber reinforced pvc flexible pipe upto 1m length with brass locking nuts and washers and clips at both ends suitable for hot water and cold water both (1 set of 2 nos.) complete. 59 supplying, installing, testing & commissioning split type variable speed invertertechnology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.3tr to 1.6tr capacity having iseer minimum 3.8 to maximum 4.39 suitable to operate on 250v, 50 hz, a.c. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant r32 having copper condenser, minimum 2.5pm filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dba at position as per specification no. apac/ wac 60 supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.7tr to 2.0tr capacity having iseer minimum 3.8 to maximum 4.39 suitable to operate on 250v, 50 hz, a.c. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant r32 having copper condenser, minimum 2.5pm filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dba at position as per specification no. apac/ wac 61 supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with rohs compliant suitable for refrigerant having 22swg thickness and inner dia/size 12mm complete. 62 supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with rohs compliant suitable for refrigeranthaving 22swg thickness and inner dia/size 16mm complete. 63 supplying, erecting, testing and commissioning self contained water cooler 230/250v 50hz nominal cooling capacity of 80 litres per hour and storage capacity 120 litres with partially stainless steel body as per specification no. ap-wcr/wc 64 supplying, erecting, testing and commissioning self contained water cooler 230/250v 50hz nominal cooling capacity of 150 litres per hour and storage capacity 150 litres with partially stainless steel body as per specification no. ap-wcr/wc 65 supplying and erecting ultra violet storage type water purifier (ro+uv+uf) with softener for safe drinking water consisting of uv germicidal tube of 8w capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230v, single phase a.c. supply with uv fail & filter change indication system .(for tds more than 200) 66 supplying, installing, testing and commissioning of single phase, 230v, 50 hz, 1400 to 1600va digital pure sine waveinverter with backup time of ........ hrs. based on insulated gate bipolar transistor (igbt) technology completeas per specification no.ap-inv 67 supplying and erecting 12v/180ah tubular battery with battery terminal wire, duly charged with 36 months warranty complete 68 supplying and erecting fully automatic line voltage stabilizer buck and boost type for operation on input voltage 160-270v and output voltage 200-250v rated for 3kva maximum load and with voltmeter, selector switch, 6a/16a flush type 3 pin socket for output and with 3 core copper flexible cord and 3 pin 6/16a plug top with overload & short circuit protection complete. 69 supplying and erecting switch disconnector fuse (sdf) switch 415v, 100a,open execution, four poleac23 a rated with terminal shrouds on both sides and phase barriers along with telescopic shaft for depth adjustments and door interlock and padlock complying to is/iec 60947-3 part-1/3hrc - din type fuse, insulation voltage 1000 vfor enclosing in panel with rotary handle for on / off operation (without hrc fuse) 70 supplying & erecting three phase, 415v, street light control panel up to the max load of 6kw, tpn mcb 40a,powder coated crca 14 swg sheet, outdoor type, having ip54,ik10 protection, suitable rating contactor, 24 hrs. astronomical time switch with minimum 5 years battery back up,auto/manual selector switch, on/off push buttons, indicator lamps, control wiring, metering device, etc. for automatic operation, with overcurrent, short circuit, earth fault protectionon provided iron frame / cc foundation. 71 supplying, erecting & marking spmcb 0.5a to 5a, c-series with rated short - circuit breaking capacity (icn) 10kain provided distribution board as per specification no. sw-swr/mcb 72 supplying, erecting & marking spmcb 6a to 32a, c-serieswith rated short - circuit breaking capacity (icn) 10ka in provided distribution board as per specification no. sw-swr/mcb 73 supplying, erecting & marking spmcb 6a to 32a, b-series with rated short - circuit breaking capacity (icn) 10ka in provided distribution board as per specification no. sw-swr/mcb 74 supplying, erecting & marking dpmcb 6 a to 32 a, b-series with rated short - circuit breaking capacity (icn) 10ka in provided distribution board as per specification no. sw-swr/mcb 75 supplying, erecting & marking tpmcb 6a to 32a, with rated short - circuit breaking capacity (icn) 10ka in provided distribution board as per specification no. sw-swr/mcb 76 supplying, erecting & marking tpmcb 40a to 63a, with rated short - circuit breaking capacity (icn) 10ka in provided distribution board as per specification no. sw-swr/mcb 77 supplying, erectingand marking double pole isolator only switch version of miniature circuit breakerof40awith required wiring connections and lugs etc. in provided distribution board. 78 supplying, erecting and markingfour pole isolators only switch version of miniature circuit breakers of 40a in provided distribution board. 79 supplying, erecting and markingfour pole isolators only switch version of miniature circuit breakers of 63ain provided distribution board. 80 supplying&erectingtriplepole and neutral distribution board (tpndb), sp/tp mcbs total 4 ways /12 poles, with door, 1.2mm thickness surface/flushmounted, ip 43 protection on iron/gi frame (vertical busbar type) as per specification no. sw-swr/mcbdb 81 supplyingand erecting single pole and neutral distributionboard (spndb), with 2 ways for incoming and 6 ways (6 poles) for outgoing sp mcbs, with door, 1.2mm thickness surface / flush mounted, ip 43 protection on iron / gi frame as per specification no. sw-swr/mcbdb 82 supplying & erecting crca sheet metal one way enclosures of 1.2mm thickness suitable for dp mcb /tp mcb/fp mcb/rccb/rcbo complete erected on angle iron/gi frame. 83 supplying & erecting triple pole and neutral distribution board (tpndb), 3 pole/4 pole mccb as incomer & outgoing sp mcb (36 poles) or tp mcb of 12 ways (36 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/gi frame (vertical busbar type) as per specification no. sw-swr/mcbdb1 84 providing & erecting 4 pole mccb, 415 v, 100a, rated short-circuit breaking capacity 25 ka (ics=100% of icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/uv/trip alarm contact.mccb with phase barriers on both sides, insulation withstand capacity 800v, no line-load bias in provided enclosure/panel as per specification no. sw-swr/mccb (rate of 3 pole mccb +20% for 4 pole mccb= 5309x20%+5309=6370.80) 85 supplying and erecting cupboard for enclosing switchgears orforany other purposemadefromselected marine plywood planks 19 mm thick duly varnished/ painted from inside and from outside with brass hinges and locking arrangement with suitable lock with keys in duplicate. cupboard shall be duly grouted with suitable size of iron work in wall at the bottom. (size of cupboard 0.5x1x2+0.5x1x2+1x1x2= 4 sq.mtrs.) 86 supplyinganderectingiron, sheet metal work consisting of crcasheets, varioussectionsofiron,plates, chequeredplates,rods,bars,mspipes,etc. forpanel board or any other purpose with bending, cutting, drilling and welding completeerectedatthepositionwith necessarymaterialsdulypaintedwith one coat of red oxide and two coats of enamelpaint to match the switchgears or as per directions by the authority. ( 50x50x4mm angle @ 3.4 kgs x 6 mtrs.= 20.40 kgs i,e 20 kgs. 87 supplying and erecting 525 v 3 phase, 50 hz., mpp type capacitor having minimum overcurrent capacity of 1.8 in,peak inrush current capacity 300 inand minimum life 150000 hourskvarbank of all polypropylenecondensers (app)withthestandard capacities of 2, 3, 5, 7, 10, 12.5 and 15 kvarunitsofp.f. correctionforoperationon 3 phase 50 hz. with externally discharging resistances, earthing terminals and built on angle iron or channel iron frame work and providedwithterminalcoverbox completeerected onprovidediron bracketoronfloordulytestedby licensee.( original p.f=0.8 desired p.f = 0.95 for this multiplying factor is 0.421. so 0.421 x 46.440 = 19.55 i.e 10 kvar x 2= 20 kvar) 88 supplying, erecting & terminating fr xlpe insulated, galvanised steel formed wire armoured (strip) cable 1100 v, 2 core 6sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. cb-lt/al 89 supplying, erecting & terminatingfr xlpe insulated, galvanised steel formed wire armoured (strip) cable 1100 v, 3½ core50 sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. cb-lt/al (double run) 90 supplying, erecting & terminatingfr xlpe insulated, galvanised steel formed wire armoured (strip) cable 1100 v, 4 core6sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. cb-lt/al 91 supplying & erecting g.i. pipe‘a’ class 50 mmdia.erectedfor enclosingxlpearmouredcable on wall/poleas per specification no. cb-ce 92 supplying andlaying (including excavation of suitable width & depth up to 90 cm) 50 mmoutside dia. double wall corrugatedpipes(dwc) ofhdpe for enclosing cable below ground/road surface, to required depth complete. 93 supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mmoutside dia. double wall corrugatedpipes (dwc) ofhdpe for enclosing cable below ground/road surface, to required depth complete. 94 supplying & erectingcast iron cable indicatorplate buried along with route of cable for pvc / xlpe armoured cableas per specification no. cb-cip 95 supplying & erecting frp box of size 150mm x 125mm x 100 mm, 2.7 mm thickcomplete on pole/wallas per specification no. cb-sb 96 providing & erecting 8 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 135 mm a/f, top 70 mm a/f on provided foundation as per specification no. oh-pl/opl 97 providing and erecting galvanised 1000mm single arm sword type bracket with frp dome and ball as per specification no. oh-pl/pbkt 98 providing and erecting galvanised 1000mm double arm sword type bracket with frp dome and ball as per specification no. oh-pl/pbkt 99 providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results asper specification no. ea-ep 100 providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results asper specification no. ea-ep 101 providingpipetype earthing with 40mm. dia. g.i. pipe or 20 mm dia. g.i. rodcomplete with all materials testing and recording the results as per specification no. ea-ep 102 supplying and erecting gi strip of required size used for earthing on wall and/or any other purpose with necessary gi clampsfixed on wall painted with insulating and non-corrosive bond with requiredjointsas per specification no. ea-ep.(25x3mm strip. perpole 1.5 mtrs. so for 13 poles 13nos.x1.5mtrs.= 19.5 mtrs. weight of strip @0.590kgs/mtr. so 19.50mtrs.x0.590kgs.=11.51 kgs.) 103 supplying and erecting minimum three & above star rated 1 phase, 230 v, 50 hz, submersible pump set of 1.5 kw/2hp suitable for erection on open well, pump having delivery head from 29to 7 m and discharge from 30 to 600 litres. . per minute& pipe of suction 50 mm/delivery 50 mm diameter erected with necessary h type clamps as per specification no. wp-osp 104 supplying & erecting flat flexible 3 core 4 sq.mm pvc sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. 105 supplying & erecting automatic control panel for 1 ph, 230 volt, a.c. submersible/centrifugal pump set up to 3 hp consisting of dol starter of suitable relay range s.p.p., combined ammeter/ voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip 54 protection. 106 supplying & erecting carbon dioxide (co2) fire extinguisher of 4.5 kg. capacity cartridge type conform to is 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. m. s. flat with nut & bolts routed in wall complete. 107 making cement concretefoundationin 1:3:6 cement concrete,(20 to 25) mm. stone metal duly plastered with necessary curing forcomplete. (02x02x02 foundation for main control panel stand and for street light control panel 0.2x0.2x0.2mtr.=0.16 cu.mtrs.) 108 makingm- 20 grade reinforced cement concretefoundation by considering the safe soil bearing capacity at site as 10 t/sq.mat 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical gi pole). 109 supplying and erecting isi mark gi pipe 50 mm dia.‘b’ class at position with accessories complete as per specification no. cw-plb/gp. 110 supplying and erecting high density polythene pipe isi mark 50 mm. dia. suitable for pressure of 6 kg. / cm2 connected tojet/submersible pump with required material complete. 111 supplying and erecting 50 mm dia. gun metal sluice valve at position with necessary materials complete. 112 supplying and erecting non return valve 50 mm dia in position made of gun metal complete. 113 lum sump provision towards service connection charges1 no.3 phase @ rs. 55000/-/per total rs.55,000/-

State Government

TRN :49022491 | 20 May, 2025

Tender Value : 12.08 Lacs

Tapi - Gujarat

Tender for tender for work for preventive maintenance contract of ht/lt motors along with its module / breaker, cable tray cleaning work, cleaning of 6.6 kv/415 v bus-bar panel, cleaning of 415 volt panel, rio panel, plc panel, vfd panel, acdb of lighting panel, welding panel and various miscellaneous work at chp – i, ii & iii of gsecl, tps, ukai.(ele. fuel)

Related Searched Keywords : bar

List of bar Tenders

Get bar Tender Alert...

Related Searched Keywords : bar

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us