Filters

List of c-band Tenders

List of latest c-band Tenders in Indian Tenders. Click on any c-band Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for c-band Tenders.

All-Tenders (518)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :49029493 | 15 May, 2025

Tender Value : 32.33 Lacs

Gautam Buddha Nagar - Uttar Pradesh

Tender for construction of e-library room in village begmabad yea. wc-06 - earth work in excavation in ordinary soil in all of foundation trenches including dressing of the side and ramming of bottom.lifts up to 1.50 m including getting out theexcavated soil and disposal of surplus excavated soil as directed with in a lead of 50m. (most/a.r./yeida) 2 supplying chemical emulsion in sealed containers including delivery as specified. chlorpyriphos/ lindane emulsifiable concentrate of 20%. (dar/2.34.1/based on uppwd/sor-2020)) 3 diluting and injecting chemical emulsion for post-constructional anti-termite treatment (excluding the cost of chemical emulsion) : treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 coarse sand) to match the existing floor: with chlorpyriphos/lindane e.c. 20% with 1% concentration (dar/2.35.3.1/based on uppwd/sor-2020)) 4 2.5 cm thick damp proof course with cement and approved coarse sand 1:1½ with and including water proofing as ordered by the engineer incharge in the proportion as specified by the manufacturer including supply of all materials, labour, tools & plants etc. required for proper completion of the work and including proper curing & shutterings as necessary. (uppwd/sor-2020/361) 5 applying a coat of residual petroleum bitumen of grade of vg-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. 6 cement concrete with 4cmgauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1 including supply of all material, labour, tools&plants etc required for proper completion of the work. 7 b/w with bricks of class 150 in foundation & plinth in cm 1:4 (based on up pwd sor 2020) cement mortar 1:4 ( 1cement :4coarse sand) 8 m-150 brick work in 1:4 one cement and four course sand 2.20 f.m. mortar superstructure but for walls of half brick thick including supply of all material, labour, t&p etc. required for proper completion of the work. (uppwd/sor-2020/305(a)+310a 9 m-150 brick work in 1:4 one cement and four course sand 2.20 f.m. mortar superstructure but for walls of half brick thick including supply of all material, labour, t&p etc. required for proper completion of the work. (uppwd/sor-2020/305(a)+310a 10 extra for providing and placing in position 2 nos 6mm dia. m.s. bars at every third course of half brick masonry.uppwd-sor-2020-dar-18/6.15/ 11 providing and laying in position machine batched and machine mixed design mix m-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per is: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer-in-charge. (note :- cement content considered in this item is @ 330 kg/cum. excess/ less cement used as per design mix is payable/recoverable separately). all works upto plinth level 12 providing and laying in position machine batched and machine mixed design mix m-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per is: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer-in-charge. (note :- cement content considered in this item is @ 330 kg/cum. excess/ less cement used as per design mix is payable/recoverable separately).all works above plinth level upto floor v level 13 centringand shutteringincluding strutting, propping etc. andremoval of form for : foundation footings, base of column 14 centringand shutteringincluding strutting, propping etc. andremoval of form for : lintels, beams, plinth beam, grinder 15 centringand shutteringincluding strutting, propping etc. andremoval of form for : suspended floors, roofs, landings 16 columns, pillars, piers, abutments, posts and struts. (dar/5.9.6/based on uppwd/sor-2020)) 17 edges of slabs and breaks in floors and walls:under 20 cms wide. (dar/5.9.16.1/based on uppwd/sor-2020)) 18 earth work in rough excavation , banking excavaated earth in layers not exceeding 20 cm in depth, breaking clods watering, rolling each layer with 1/2 tonnes roller or wooden or steel rammer and rolling every 3rd and top most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, all leads as per(a.r. )for all kind of soil. 19 steel rainforcement for r.c.c. work including straightening, cutting bending, placing in position and binding all complete upto plinth level thermo-mechanically treated bars of grade fe-500d or more./cold twisted bars. (dar/5.22.6/based on uppwd/sor-2020)) 20 12mm cement plaster of mix: 1:6 (1 cement : 6 coarse sand)based on up pwd sor 2020 dar-18/13.4.2 21 6mm cement plaster of mix: 1:3 (1 cement : 3 coarse sand)based on up pwd sor 2020 dar-18/13.17 22 15mm cement plaster of mix: 1:6 (1 cement : 6 coarse sand)based on up pwd sor 2020 dar-18/13.4.2 23 finishing walls with acrylic smooth exterior paint of required shade: new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). 24 distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade 25 providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.dar-18/13.26 26 painting with synthetic enemel paint of approved brand and manufacture to give an even shade: two or more coats on new work. 27 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes. 110mm dia 28 providing and fixing on wall face unplasticised - pvc moulded fittings/ accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion. single tee with door 110x110x110 mm (dar/12.42.3.2/based on uppwd/sor-2020) 29 bend 87.5° 110 mm bend (dar/12.42.5.2/based on uppwd/sor-2020) 30 shoe (plain) 110 mm shoe (dar/12.42.6.2/based on uppwd/sor-2020) 31 providing and fixing unplasticised -pvc pipe clips of approved design to unplasticised - pvc rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with m.s. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm (dar/12.43.2/based on uppwd/sor-2020) 32 providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.(dar/12.44/based on uppwd/sor-2020) 33 steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.dar-18/10.25.2 34 providing and fixing water closet squatting pan (indian type w.c. pan with 100mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required white vitreous china orissa pattern w.c. pan of size 580x440mm with integral type foot rests.up pwd sor-2020-dar 18/17.1.1 35 providing and fixing wash basin with c.l. brackets, 15 mm c.p. brass pillar taps,32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:uppwd sor-2020-dar 17.7.1 36 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge.20mm od pipes. (dar/18.8.2/based on uppwd/sor-2020) 37 25mm od pipes. (dar/18.8.3/based on uppwd/sor-2020) 38 providing and fixingbrass gate valve with c.i. wheel of approved quality (screwed end) : 25 mm nominal bore. (dar/18.17.1/based on uppwd/sor-2020) 39 32 mm nominal bore. (dar/18.17.2/based on uppwd/sor-2020) 40 providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to is. 2645 and approved by engineer-in-charge over the rcc slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement: 5 coarse sand) admixed with water proofing compound conforming to is : 2645 and approved by engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to is : 2645 and approved by engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) after two days of proper curing applying a second coat of cement slurry using 2.75kg! sqm of cement admixed with water proofing compound conforming to is : 2645 and approved by engineer-in-charge. d) finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 coarse sand) admixed with water proofing compound conforming to is: 2645 and approved by engineer-in-charge including laying glass fibre doth of approved quality in top layer of plaster and finally finishing the surface with trowe’ with neat cement suvr an making pattern ot 300x300 mm square 3mm deep. e) the whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. all above operations to be done in order and as directed and specified by the engineer-in-charge: dar18/22.7.1 41 providing and placing on terrace (at all floor levels) polyethylene water storage tank isi: 12701 marked with cover and suttable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank dar 18/ 18.48 42 making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - iii) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.(dar 2018-4.17)based on uppwd sor/2020 43 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. size of tile 600x600mm (dar/11.41.2/based on uppwd/sor-2020)) 44 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (dar/8.31/based on uppwd/sor-2020)) 45 providing and fixing brass bib cock of approved quality: 15 mm nominal bore (dar/18.15.1/based on uppwd/sor-2020)) 46 providing and fixingbrass gate valve with c.i. wheel of approved quality (screwed end) : 25 mm nominal bore. (dar/18.17.1/based on uppwd/sor-2020) 47 providing and fixing nahani trap 75x100mmincluding all complete. 48 20 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand-dar-18/13.6.1/p-902 49 providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30mm thick including isi marked stainless steel butt hinges with necessary screws. (dar/9.21.2/based on uppwd/sor-2020)) 50 extra for providing isi marked stainless steel butt hinges instead of m.s. pressed butt hinges bright finished of required size with necessary screws. (shutter area to be measured). (dar/9.14/based on uppwd/sor-2020)) 51 renewing panes of glass in door, window & ventilators or fixing in the new work with 3mm thick glass panes fixed with brads & putty includung supply of all material , labour , tools & plants required for proper completion of workuppwd sor 2020/p26/806 52 prroviding and fixing isi mark 3 layer prelaminated particle board conforming to grade 2 type-iii of is-12823/20b laminated with 0.6-0.8 mm thick laminate conforming to is-2046/1995 and balancing lamination of 0.5 mm thick on the back side (size 700750430) including all complete 53 supply of work sb collection office/visitor chain with sheat dxwxh 400400450 mm padded with polyurithane foam complete 54 supply wook at site sb collection executive table of 3 layer prelaminated particle board (wood product) of grade 2 type 2 of is-12823/latest 1830 mm 950 mm 750mm including all complete 55 supplying and filling in plinth with jamuna sand under floors, including watering, ramming, consolidating and dressing complete. dar-18/2.27 56 providing and fixing factory made isi marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as f7d, f4b, k11 b and k12 b etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of c.c. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 57 constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast r.c.c. horizontal grating with frame complete as per standard design with common burnt clay f.p.s. (non modular) bricks of class designation 7.5.(dar/18.33.1/based on uppwd/sor-2020) 58 providing, laying and jointing glazed stoneware pipes class sp-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : (dar/19.1.1/based on uppwd/sor-2020) 59 providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round s.w. pipes including bed concrete as per standard design : (dar/19.2.2/based on uppwd/sor-2020) 60 providing and fixing square-mouth s.w. gully trap class sp-1 complete withc.i. grating brick masonry chamber with water tight c.i. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: (dar/19.4.1/based on uppwd/sor-2020) 61 providing and fixing heavy class ss gratingof approved design including setting in floor with cement motor to match with floor finish as per architect requirement suitable for waster and ft, ut & fd.size 150 mm x 150 mm 62 providing and fixing ptmt towel rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.(dar/17.73.2/based on uppwd/sor-2020)) 63 providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete. (dar/17.31/based on uppwd/sor-2020)) 64 providing and fixing ptmt soap dish holder having length of 138mm, breadth102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. (dar/18.65/based on uppwd/sor-2020)) 65 providing and fixing chicken wire mesh (murga jali) 24 gauge and 20 mesh at junction of rcc and masonry walls including fixing in position with steel nails of 25 mm in length as approved at required as directed by engineer-in-charge, scaffolding etc. complete. (ar/yeida//based on uppwd/sor-2020))½x24 gauge 66 providing and fixing aluminium hanging floor door stopper, isi marked, anodised (anodic coating not less than grade ac 10 as per is: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.(dar/9.101.1/based on uppwd/sor-2020))single rubber stopper 67 providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:250x10mm(dar/9.97.2/based on uppwd/sor-2020)) 68 providing and fixing aluminium handles,isi marked, anodised (anodic coating not less than grade ac 10 as per is: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete.125 mm (dar/9.100.1/based on uppwd/sor-2020)) 69 providing and fixing ptmt extension nipple for water tank pipe, fittings of approved quality and colour.25mm nominal bore, weighing not less than 62 gms. (dar/18.75.3/based on uppwd/sor-2020)) 70 providing & fixing of cp heavy duty bottle trap 32mm. (complete complying with relavent standard specification and as directed by the competent authority.) for wash basin&urinal 71 providing and fixing 1 mm thick m.s. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm m.s. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and t- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer up pwd sor-2020-dar-18/10.4 72 construction of granular sub-base by providing close graded material, mixing in mechanical mix plant at omc, carriage of mixed material to work at site, spreading uniform layers with motor grader on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 for grade-1 material. (morth/(ar/yeida/based on uppwd/sor-2020) 73 providing and laying 60mm thick i.s.i. mark factory made cement concrete interlocking concrete paver block made by block making machine with strong vibratory compaction of approved size, design, shape, laid in required colour and pattern over and including average 50mm thick compacted bed coarse sand and filling the joints with fine sand all complete as per the direction of engineer-in-charge with conforming to is-15658 and irc:sp:63. (ar/yeida/ based on uppwd/sor-2020) 74 wiring point for light in 1.5 sq. mm. pvcinsulated singlecorecopperconductor cable (inpvcconduit with 1.5sq.mm. frlsh pvc insulated multistrand copperconductor cable as earth wire drawn inside conduit.)and5 amp.flush typeswitch& ceiling rose/angle/batten holderfixedwith3mmthickphenolic laminate backalitesheet withbrass machinescrews andcup washers mounted overexisting m.s.switch boardbox/junction boxwith supplyofallmaterial, labour& t&p etc. requiredforproper completion of the work complete in all respect, as directed by engineer in charge pwd-2018 ps no-174c 75 supply and wiring of submains with 2 nos. of 2.5 sq. mm. frlsh pvc insulated1100 vgrade multistrand singlecore copper conductorcable in 25mm dia heavy duty (2mm thick) pvc conduitwith2 nos 2.5 sq.mm.frlsh pvc insulated multistrand copperconductor cable asearth continuity wire drawn in conduit complete in all respect, as directed by engineer in charge pwd-2018 ps no-261c 76 supply and fixing of power plug with 20 amp./250 voltflush type modularswitchand 5 pin 20 a/250 voltflush typeuniversal modular socket switch on concealed m.sboxincluding supply of allmaterial, labourt&petc. complete in all respect, as directed by engineer in charge .pwd-2018 ps no-1139a 77 s&f surface/flush mounting 8 ways spn distribution board with additional metal door without mcb complete in all respect, as directed by engineer in charge. pwd-2018 ps -1024a 78 s&f of 6 amp to 32 amp. mcb (10 ka) c curve complete in all respect, as directed by engineer in charge.pwd-2018ps -1002cat-a 79 s&f of 40amp. dp mcb (10 ka) c curve complete in all respect, as directed by engineer in charge. pwd-2018 ps no-1010 cat-a 80 providing and fixing circular/ hexagonal cast iron or m.s. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick m.s. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ m.s. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. clamp shall be made of 12 mm dia m.s. bar bent to shape as per standard drawing. (dar/10.18/based on uppwd/sor-2020))

corporations/Associations/Others

TRN :49029516 | 19 May, 2025

Tender Value : 70.00 Lacs

Kutch - Gujarat

Tender for annual rate contract for the work to supply various goods at water works department of gandhidham municipal corporation.=1 isi mark 6kg/cm2 pvc pipe with socket, supreme, finolex, prince, dutron, mefer and its equivalent 1.1 63mm 1.2 90mm 1.3 110mm 1.4 160mm 1.5 200mm 1.6 225mm 2 isi mark 4kg/cm2 pvc pipe with as above mentioned brand 2.1 63mm 2.2 90mm 2.3 110mm 2.4 160mm 2.5 200mm 2.6 225mm 3.1 6 cast iron foot valve 3.2 8 cast iron foot valve 3.3 10 cast iron foot valve 4.1 6 cast iron isi mark non return valve 4.2 8 cast iron isi mark non return valve 4.3 10 cast iron isi mark non return valve 5.1 3 cast iron isi mark pn-1 sluice valve 5.2 4 cast iron isi mark pn-1 sluice valve 5.3 6 cast iron isi mark pn-1 sluice valve 5.4 8 cast iron isi mark pn-1 sluice valve 5.5 10 cast iron isi mark pn-1 sluice valve 5.6 12 cast iron isi mark pn-1 sluice valve 5.7 14 cast iron isi mark pn-1 sluice valve 5.8 16 cast iron isi mark pn-1 sluice valve 5.9 18 cast iron isi mark pn-1 sluice valve 5.10 24 cast iron isi mark pn-1 sluice valve 6 isi mark class 10kg/cm2 ac pipe fitting ci collor all sbr rubber ring set with nut bolt and other necessary item, short collar 6.1 3 short collar 6.2 4 short collar 6.3 6 short collar 6.4 8 short collar 6.5 10 short collar 6.6 12 short collar 6.7 14 short collar 6.8 16 short collar 6.9 18 short collar 6.10 24 short collar 7 isi mark class 10kg/cm2 ac pipe fitting ci collor all sbr rubber ring set with nut bolt and other necessary item, long collar 7.1 3 long collar 7.2 4 long collar 7.3 6 long collar 7.4 8 long collar 7.5 10 long collar 7.6 12 long collar 7.7 14 long collar 7.8 16 long collar 7.9 18 long collar 7.10 24 long collar 8 isi mark class 15kg/cm2 ac pipe fitting ci collor all sbr rubber ring set with nut bolt and other necessary item, short collar 8.1 3 short collar 8.2 4 short collar 8.3 6 short collar 8.4 8 short collar 8.5 10 short collar 8.6 12 short collar 8.7 14 short collar 8.8 16 short collar 8.9 18 short collar 8.10 24 short collar 9 isi mark class 15kg/cm2 ac pipe fitting ci collor all sbr rubber ring set with nut bolt and other necessary item, long collar 9.1 3 long collar 9.2 4 long collar 9.3 6 long collar 9.4 8 long collar 9.5 10 long collar 9.6 12 long collar 9.7 14 long collar 9.8 16 long collar 9.9 18 long collar 9.10 24 long collar 10 cast iron double acting air valve 3 to 24 11 isi brand engine with couple pump (dewatering set) mounted on trolley with two tires tube, heavy duty suction pipe 4 meters and heavy duty delivery pipe 10 meters 11.1 5 hp 11.2 7.5 hp 11.3 10 hp 12 isi mark priming motor with pump 12.1 0.5 hp 12.2 1 hp 13 cast iron tail piece flanged to fit class 10 kg/cm2 ac pipe from 3 to 24 14 80mm to 600mm cast iron fitting flange and without flange 15 isi brand heavy duty valve opening wrench taparia make or its equivalent 15.1 14 15.2 18 15.3 24 16 isi mark heavy duty fix spanner set 17 isi mark heavy duty ring spanner set 18 chain pully block 5 ton capacity 19 20 21 solution for pvc pipe joint 22 waterproof compound 23 liquid for quick cement setting in leakage repair 24 aprooved quality black japan oil paint 25.1 1/2 isi mark brass wheel valve 25.2 3/4 isi mark brass wheel valve 25.3 1 isi mark brass wheel valve 25.4 1/5 isi mark brass wheel valve 25.5 2 isi mark brass wheel valve 25.6 2/5 isi mark brass wheel valve 25.7 3 isi mark brass wheel valve 26.1 6 6mm thick ms pipe 26.2 10 6mm thick ms pipe 27.1 3 ms flange 27.2 4 ms flange 27.3 6 ms flange 27.4 8 ms flange 27.5 10 ms flange 27.6 12 ms flange 27.7 14 ms flange 27.8 16 ms flange 27.9 18 ms flange 27.10 24 ms flange 28 fatakdi 29.1 1/2 gi pipe 29.2 3/4 gi pipe 29.3 1 gi pipe 29.4 2 gi pipe 29.5 3 gi pipe 29.6 4 gi pipe 30 hypo chloride solution 80 to 90 gpl (chlorine liquid) in plastic cane 31 chlorine tablet isi mark 32 bleaching powder 33.1 200 liter heavy pvc tanki 33.2 500 liter heavy pvc tanki 33.3 700 liter heavy pvc tanki 33.4 1000 liter heavy pvc tanki 34 nut blot 35 rubber packing 36 spun yarn 37 stad nut approved quality 38 hexa frame approved quality 39 hexo blade isi marked 40 hand glowes isi marked 41 isi mark pvc fittings all socket, elbow, tee, inner, outer and cap etc. 41.1 2 41.2 3 41.3 4 41.4 6 41.5 8 42 all type gi fittings 43.1 3 dhoriya pipe (pvc) (can be wrapped) 43.2 4 dhoriya pipe (pvc) (can be wrapped) 43.3 5 dhoriya pipe (pvc) (can be wrapped) 43.4 6 dhoriya pipe (pvc) (can be wrapped) 44.1 2 saction pipe (for water tanker) 44.2 2/5 saction pipe (for water tanker) 44.3 3 saction pipe (for water tanker) 44.4 4 saction pipe (for water tanker) 44.5 5 saction pipe (for water tanker) 45.1 1/2 pvc fittings (socket) 45.2 3/4 pvc fittings (socket) 45.3 1 pvc fittings (socket) 45.4 1.5 pvc fittings (socket) 45.5 2 pvc fittings (socket) 45.6 3 pvc fittings (socket) 45.7 4 pvc fittings (socket) 45.8 5 pvc fittings (socket) 45.90 6 pvc fittings (socket) 45.10 8 pvc fittings (socket) 45.11 9 pvc fittings (socket) 45.12 10 pvc fittings (socket) 45.13 12 pvc fittings (socket) 46.1 1/2 pvc fittings (tee) 46.2 3/4 pvc fittings (tee) 46.3 1 pvc fittings (tee) 46.4 1.5 pvc fittings (tee) 46.5 2 pvc fittings (tee) 46.6 3 pvc fittings (tee) 46.7 4 pvc fittings (tee) 46.8 5 pvc fittings (tee) 46.9 6 pvc fittings (tee) 46.10 8 pvc fittings (tee) 46.11 9 pvc fittings (tee) 46.12 10 pvc fittings (tee) 46.13 12 pvc fittings (tee) 47.1 1/2 pvc fittings (elbow) 47.2 3/4 pvc fittings (elbow) 47.3 1 pvc fittings (elbow) 47.4 1.5 pvc fittings (elbow) 47.5 2 pvc fittings (elbow) 47.6 3 pvc fittings (elbow) 47.7 4 pvc fittings (elbow) 47.8 5 pvc fittings (elbow) 47.9 6 pvc fittings (elbow) 47.10 8 pvc fittings (elbow) 47.11 9 pvc fittings (elbow) 47.12 10 pvc fittings (elbow) 47.13 12 pvc fittings (elbow) 48.1 1/2 pvc fittings (outer) 48.2 3/4 pvc fittings (outer) 48.3 1 pvc fittings (outer) 48.4 1.5 pvc fittings (outer) 48.5 2 pvc fittings (outer) 48.6 3 pvc fittings (outer) 48.7 4 pvc fittings (outer) 48.8 5 pvc fittings (outer) 48.9 6 pvc fittings (outer) 48.10 8 pvc fittings (outer) 48.11 9 pvc fittings (outer) 48.12 10 pvc fittings (outer) 48.13 12 pvc fittings (outer) 49.1 1/2 pvc fittings (inner) 49.2 3/4 pvc fittings (inner) 49.3 1 pvc fittings (inner) 49.4 1.5 pvc fittings (inner) 49.5 2 pvc fittings (inner) 49.6 3 pvc fittings (inner) 49.7 4 pvc fittings (inner) 49.8 5 pvc fittings (inner) 49.9 6 pvc fittings (inner) 49.10 8 pvc fittings (inner) 49.11 9 pvc fittings (inner) 49.12 10 pvc fittings (inner) 49.13 12 pvc fittings (inner) 50.1 1/2 pvc fittings (reducer) 50.2 3/4 pvc fittings (reducer) 50.3 1 pvc fittings (reducer) 50.4 1.5 pvc fittings (reducer) 50.5 2 pvc fittings (reducer) 50.6 3 pvc fittings (reducer) 50.7 4 pvc fittings (reducer) 50.8 5 pvc fittings (reducer) 50.9 6 pvc fittings (reducer) 50.10 8 pvc fittings (reducer) 50.11 9 pvc fittings (reducer) 50.12 10 pvc fittings (reducer) 50.13 12 pvc fittings (reducer) 51.1 1/2 pvc fittings (end cap (dummy)) 51.2 3/4 pvc fittings (end cap (dummy)) 51.3 1 pvc fittings (end cap (dummy)) 51.4 1.5 pvc fittings (end cap (dummy)) 51.5 2 pvc fittings (end cap (dummy)) 51.6 3 pvc fittings (end cap (dummy)) 51.7 4 pvc fittings (end cap (dummy)) 51.8 5 pvc fittings (end cap (dummy)) 51.9 6 pvc fittings (end cap (dummy)) 51.10 8 pvc fittings (end cap (dummy)) 51.11 9 pvc fittings (end cap (dummy)) 51.12 10 pvc fittings (end cap (dummy)) 51.13 12 pvc fittings (end cap (dummy)) 52.1 1/2 pvc fittings (broos) 52.2 3/4 pvc fittings (broos) 52.3 1 pvc fittings (broos) 52.4 1.5 pvc fittings (broos) 52.5 2 pvc fittings (broos) 52.6 3 pvc fittings (broos) 52.7 4 pvc fittings (broos) 52.8 5 pvc fittings (broos) 52.9 6 pvc fittings (broos) 52.10 8 pvc fittings (broos) 52.11 9 pvc fittings (broos) 52.12 10 pvc fittings (broos) 52.13 12 pvc fittings (broos) 53.1 2 pvc fittings (dee-corlar) 53.2 3 pvc fittings (dee-corlar) 53.3 4 pvc fittings (dee-corlar) 53.4 5 pvc fittings (dee-corlar) 53.5 6 pvc fittings (dee-corlar) 53.6 7 pvc fittings (dee-corlar) 53.7 8 pvc fittings (dee-corlar) 53.8 9 pvc fittings (dee-corlar) 53.9 10 pvc fittings (dee-corlar) 53.10 11 pvc fittings (dee-corlar) 53.11 12 pvc fittings (dee-corlar) 53.12 13 pvc fittings (dee-corlar) 53.13 14 pvc fittings (dee-corlar) 53.14 15 pvc fittings (dee-corlar) 53.15 16 pvc fittings (dee-corlar) 53.16 17 pvc fittings (dee-corlar) 53.17 18 pvc fittings (dee-corlar) 53.18 19 pvc fittings (dee-corlar) 53.19 20 pvc fittings (dee-corlar) 53.20 21 pvc fittings (dee-corlar) 53.21 22 pvc fittings (dee-corlar) 53.22 23 pvc fittings (dee-corlar) 53.23 24 pvc fittings (dee-corlar) 54.1 2 pvc fittings (long band) 54.2 3 pvc fittings (long band) 54.3 4 pvc fittings (long band) 54.4 5 pvc fittings (long band) 54.5 6 pvc fittings (long band) 54.6 7 pvc fittings (long band) 54.7 8 pvc fittings (long band) 54.8 9 pvc fittings (long band) 54.9 10 pvc fittings (long band) 54.10 11 pvc fittings (long band) 54.11 12 pvc fittings (long band) 54.12 13 pvc fittings (long band) 54.13 14 pvc fittings (long band) 54.14 15 pvc fittings (long band) 54.15 16 pvc fittings (long band) 54.16 17 pvc fittings (long band) 54.17 18 pvc fittings (long band) 54.18 19 pvc fittings (long band) 54.19 20 pvc fittings (long band) 54.20 21 pvc fittings (long band) 54.21 22 pvc fittings (long band) 54.22 23 pvc fittings (long band) 54.23 24 pvc fittings (long band) 55.1 2 pvc fittings (pvc clamp) 55.2 3 pvc fittings (pvc clamp) 55.3 4 pvc fittings (pvc clamp) 55.4 5 pvc fittings (pvc clamp) 55.5 6 pvc fittings (pvc clamp) 55.6 7 pvc fittings (pvc clamp) 55.7 8 pvc fittings (pvc clamp) 55.8 9 pvc fittings (pvc clamp) 55.9 10 pvc fittings (pvc clamp) 55.10 11 pvc fittings (pvc clamp) 55.11 12 pvc fittings (pvc clamp) 55.12 13 pvc fittings (pvc clamp) 55.13 14 pvc fittings (pvc clamp) 55.14 15 pvc fittings (pvc clamp) 55.15 16 pvc fittings (pvc clamp) 55.16 17 pvc fittings (pvc clamp) 55.17 18 pvc fittings (pvc clamp) 55.18 19 pvc fittings (pvc clamp) 55.19 20 pvc fittings (pvc clamp) 55.20 21 pvc fittings (pvc clamp) 55.21 22 pvc fittings (pvc clamp) 55.22 23 pvc fittings (pvc clamp) 55.23 24 pvc fittings (pvc clamp) 56.1 1/2 gi fittings (socket) 56.2 3/4 gi fittings (socket) 56.3 1 gi fittings (socket) 56.4 1.5 gi fittings (socket) 56.5 2 gi fittings (socket) 56.6 3 gi fittings (socket) 56.7 4 gi fittings (socket) 56.8 5 gi fittings (socket) 56.9 6 gi fittings (socket) 56.10 8 gi fittings (socket) 57.1 1/2 gi fittings (tee) 57.2 3/4 gi fittings (tee) 57.3 1 gi fittings (tee) 57.4 1.5 gi fittings (tee) 57.5 2 gi fittings (tee) 57.6 3 gi fittings (tee) 57.7 4 gi fittings (tee) 57.8 5 gi fittings (tee) 57.9 6 gi fittings (tee) 57.10 8 gi fittings (tee) 58.1 1/2 gi fittings (elbow) 58.2 3/4 gi fittings (elbow) 58.3 1 gi fittings (elbow) 58.4 1.5 gi fittings (elbow) 58.5 2 gi fittings (elbow) 58.6 3 gi fittings (elbow) 58.7 4 gi fittings (elbow) 58.8 5 gi fittings (elbow) 58.9 6 gi fittings (elbow) 58.10 8 gi fittings (elbow) 59.1 1/2 gi fittings (outer) 59.2 3/4 gi fittings (outer) 59.3 1 gi fittings (outer) 59.4 1.5 gi fittings (outer) 59.5 2 gi fittings (outer) 59.6 3 gi fittings (outer) 59.7 4 gi fittings (outer) 59.8 5 gi fittings (outer) 59.9 6 gi fittings (outer) 59.10 8 gi fittings (outer) 60.1 1/2 gi fittings (inner) 60.2 3/4 gi fittings (inner) 60.3 1 gi fittings (inner) 60.4 1.5 gi fittings (inner) 60.5 2 gi fittings (inner) 60.6 3 gi fittings (inner) 60.7 4 gi fittings (inner) 60.8 5 gi fittings (inner) 60.9 6 gi fittings (inner) 60.10 8 gi fittings (inner) 61.1 1/2 gi fittings (reducer) 61.2 3/4 gi fittings (reducer) 61.3 1 gi fittings (reducer) 61.4 1.5 gi fittings (reducer) 61.5 2 gi fittings (reducer) 61.6 3 gi fittings (reducer) 61.7 4 gi fittings (reducer) 61.8 5 gi fittings (reducer) 61.9 6 gi fittings (reducer) 61.10 8 gi fittings (reducer) 62.1 1/2 gi fittings (nipple) 62.2 3/4 gi fittings (nipple) 62.3 1 gi fittings (nipple) 62.4 1.5 gi fittings (nipple) 62.5 2 gi fittings (nipple) 62.6 3 gi fittings (nipple) 62.7 4 gi fittings (nipple) 62.8 5 gi fittings (nipple) 62.9 6 gi fittings (nipple) 62.10 8 gi fittings (nipple) 63.1 1/2 gi fittings (end cap (dummy)) 63.2 3/4 gi fittings (end cap (dummy)) 63.3 1 gi fittings (end cap (dummy)) 63.4 1.5 gi fittings (end cap (dummy)) 63.5 2 gi fittings (end cap (dummy)) 63.6 3 gi fittings (end cap (dummy)) 63.7 4 gi fittings (end cap (dummy)) 63.8 5 gi fittings (end cap (dummy)) 63.9 6 gi fittings (end cap (dummy)) 63.10 8 gi fittings (end cap (dummy)) 64.1 1/2 apvc fittings (socket) 64.2 3/4 apvc fittings (socket) 64.3 1 apvc fittings (socket) 64.4 1.5 apvc fittings (socket) 64.5 2 apvc fittings (socket) 64.6 3 apvc fittings (socket) 64.7 4 apvc fittings (socket) 64.8 5 apvc fittings (socket) 64.9 6 apvc fittings (socket) 65.1 1/2 apvc fittings (tee) 65.2 3/4 apvc fittings (tee) 65.3 1 apvc fittings (tee) 65.4 1.5 apvc fittings (tee) 65.5 2 apvc fittings (tee) 65.6 3 apvc fittings (tee) 65.7 4 apvc fittings (tee) 65.8 5 apvc fittings (tee) 65.9 6 apvc fittings (tee) 66.1 1/2 apvc fittings (elbow) 66.2 3/4 apvc fittings (elbow) 66.3 1 apvc fittings (elbow) 66.4 1.5 apvc fittings (elbow) 66.5 2 apvc fittings (elbow) 66.6 3 apvc fittings (elbow) 66.7 4 apvc fittings (elbow) 66.8 5 apvc fittings (elbow) 66.9 6 apvc fittings (elbow) 67.1 1/2 apvc fittings (outer) 67.2 3/4 apvc fittings (outer) 67.3 1 apvc fittings (outer) 67.4 1.5 apvc fittings (outer) 67.5 2 apvc fittings (outer) 67.6 3 apvc fittings (outer) 67.7 4 apvc fittings (outer) 67.8 5 apvc fittings (outer) 67.9 6 apvc fittings (outer) 68.1 1/2 apvc fittings (inner) 68.2 3/4 apvc fittings (inner) 68.3 1 apvc fittings (inner) 68.4 1.5 apvc fittings (inner) 68.5 2 apvc fittings (inner) 68.6 3 apvc fittings (inner) 68.7 4 apvc fittings (inner) 68.8 5 apvc fittings (inner) 68.9 6 apvc fittings (inner) 69.1 1/2 apvc fittings (reducer) 69.2 3/4 apvc fittings (reducer) 69.3 1 apvc fittings (reducer) 69.4 1.5 apvc fittings (reducer) 69.5 2 apvc fittings (reducer) 69.6 3 apvc fittings (reducer) 69.7 4 apvc fittings (reducer) 69.8 5 apvc fittings (reducer) 69.9 6 apvc fittings (reducer) 70.1 1/2 apvc fittings (end cap(dummy)) 70.2 3/4 apvc fittings (end cap(dummy)) 70.3 1 apvc fittings (end cap(dummy)) 70.4 1.5 apvc fittings (end cap(dummy)) 70.5 2 apvc fittings (end cap(dummy)) 70.6 3 apvc fittings (end cap(dummy)) 70.7 4 apvc fittings (end cap(dummy)) 70.8 5 apvc fittings (end cap(dummy)) 70.9 6 apvc fittings (end cap(dummy))

Government Departments

TRN :49029657 | 14 May, 2025

Tender Value : 15.14 Lacs

Fatehpur - Uttar Pradesh

Tender for construction of cc road and drain from banda sagar road to pankaj tiwaris house via laleshwar temple in village shah of development block bahua

State Government

TRN :48969024 | 10 May, 2025

Tender Value : 1.00 Crore

Jalore - Rajasthan

Tender for tender for rate contract for construction materials and equipment fy 202-26 - ghadhla kankar jhajhrha mud masala , lime , cement , fine aggregate , fly ash , sand gravel , grit stone brick , stone pattiya , precast tiles , vitrified , cement interlocking wood with fitting , iron , structural steel , winding wire , iron girder , barbed wire , iron net , glass color paint , modular socket outlet , enamel paint ., bitumen tax board , g i sheet , sheet , pipe , road roller , truck , vehicle hiring , compressor , dumper , tractor with scraper , ghisai machine operator , cultivator , manpower services , rolling shutter, ferro cover , tiles , stone , kerb stone , pipe , putti , , varnish , flange , g i band , sluice valve , submersible pump set , sing phase head , handpump , connecting rods , fly ash brick , ordinary soil , hard soil , disintegrated rocks etc

Government Departments

TRN :48962747 | 10 May, 2025

Tender Value : 40.00 Lacs

Jaipur - Rajasthan

Tender for supply of x ray films and other general consumable item , digital x-ray film, fuji di-hl (blue base) 810 , digital x-ray film fuji di-hl (blue base)1012 , digital x-ray film carestream 810 , digital x-ray film carestream 1012 , dental x-ray film , x-ray fixer with hardener packet , x-ray developer packet , led apron , 50 litre plastic tank for fixer store , 220 ltr plastic tank for fixer store , cassette for cr system (fuji) 810 , cassette for cr system (fuji) 1012 , cassette for cr system (carestream ) 810 , cassette for cr system (carestream )1012 , led barrier 2.00 mm , x-ray viewing box( with light brightness control) 26*17 , cotton balls(pack of 500) , abdomen belts , b.p. knife blade no. 11, 15, 18, 22, 23 , baetigrase dressing 10cm x 30cm , bain air circuit adult , bain air circuit pediatric , black goggle , bleaching powder 25kg. , blood collection bag (single) 100ml. , blood collection bag (single) 350ml. , cervical collar all size , crepe bandage 10cm x 4mt. , crepe bandage 15cm x 4mt. , crepe bandage 6cm x 4mt. , crepe bandage 8cm x 4mt. , crescent blade , dyna plast 2 inch , elastoplast 10cm x 1 mt. sterilized pkt , elastoplast 10cm x 2/3 mt. sterilized pkt , elastoplast 10cm x 6mt. sterilized pkt , fast absorbable polyglactin 910 half circle taper cut , follys cath no. 12 sterilized pkt , gly-enema 100ml , guarded knife (chemical sharp) 300m , guarded knife (chemical sharp) 500m , i.v. transparent film dressing , irrigation cannula g 21 , irrigation cannula g20 , irrigation cannula g22 , irrigation cannula g 23 , kezatofeme(chemical sharp) , micro pore 1.25cm. , needle cutting half circle curve all size , pop powder 25kg. plaster of paris , precision guide needle no. 24 , roma drain bag sterilized pkt , rubber sheet (mackintosh)(1x2 mtr pack) , stockinet roll , hand sanitizer 500 ml chero hexedine / alcohol base , liquid soap 1 liter , thumb control suction catheter no. 6 per pes. , thumb control suction catheter no.8 per pes. , twinborn nasal oxygen ped sterilized , twinborn nasal oxygen set adults sterilized , baby diaper new born size , baby diaper small size , baby kits set of 5 , baby bachpan kit (edkit) , delivery drap sheet large , bed sheet disposable sms , disposable hiv protection kit , surgical reinforced gown , surgeon gown disposable , first aid box , balance salt solution 500 ml , craton 2.8 , hand sanitizer 5 liter , liquid hand wash 500 ml , cleaning power1 kg packet , hand wash shop 100 gm (dettol/lifebuoy) 125 gm lifebuoy , instrument sterilizer smallelectric , formalin chamber , high flow mask , bk traction adult , bk traction pediatric , antibacterial wipes/ towelettes , paper towels , bedpans disposable , trach care tray disposable , phenyl 5 liter , regulators, 02 (oxygen regulator with overall length less than 4” and weighs just 6.9 oz. lightweight aluminum body with brass sleeve and brass internals. downward facing outlet port. , kellys pad , shoe cover pair , slippers for ot pair , straight(pack of 5 burs) , taper(pack of 5 burs) , inverted cone(pack of 5 burs) , round (pack of 5 burs) , surgical burs (31 mm) , 15 to 40 (25mm) (pack of 6 files stainless steel) k-files (2% taper) , 15 to 40 (21mm) (pack of 6 files stainless steel) k-files (2% taper) , 45to 80 (21mm) (pack of 6 files stainless steel) k-files (2% taper) , 45 to 80 (25mm)(pack of 6 files stainless steel) k-files (2% taper) , 10 no. k-files (2% taper)(21 mm) , 10 no. k-files (2% taper)(25 mm) , 15 to 40 (pack of 120 gp points) gutta percha points: 2% , 45 to 80 (pack of 120gp points) gutta percha points: 2% , de pulp , disposable plastic suction tips (pack of 100 tips) , zinc oxide powder (pack of 110 gms) , eugenol(pack of 15 ml) , glass lonometer cement restorative (pack of 15gms powder/ 10ml liquid) , silver filling material 10 gm , mercery filling material10 gm , chlorhexidine (endo -chx -2%) , lubricant for airotor 500 ml , posterior composite resin kit , temporary filling material (pack of 40 gms) , hypochlorite 3% (pack of 500ml ) , gauze swab non-sterile packet (100 pcs)

State Government

TRN :48937513 | 10 May, 2025

Tender Value : 26.17 Lacs

Nagpur - Maharashtra

Tender for supply and installation of furniture and allied electrical work at msambs division office, nagpur.2 providng and fixing in position anodised extruded aluminum partitions, partly glazed and partly laminated having frame made out of extruded tubular section of size 40 mm x 60 mm, 1.5 mm thick with 12 mm thick three layered flat pressed teak wood particle board bonded with bwp type exterior grade phenol formaldehyde synthetic resin conforming to is 128231990, laminated on both sides,novateakor equivalent and 5 mm thick selected quality plain/ float glass panels fixed with aluminum glass clips 12 mm x 12 mm and rubber cushioning beading to glass partitions, with wood boxing to all aluminium tubuler section as per approved drawing etc. compete(as directed by engineer-in-charge) 3 providing and fixing in position, single shuttered aluminium extruded powder coatedopenabledoorofoverallsize0.90mx2.40mwithaluminiumdoorframeof powdercoatedsection101.60x44.75mm,3.18mmthickandshuttercomprisingof powder coated section having bottom andlock rail of size 150 mm x 44.5mm x 3.00 mm thick top rails 47.62x 44.45 mm x 3.00 mm thick , vertical style 47.62 x 44.45 mm, with wood boxing to all aluminium tubuler section 3.00mmthickandforshutterplain glass panes 5 mm thick for top panels and 12mmthickbothsidelaminatedphenol bonded particle board panels for bottom panels etc. , i.s.i. mark , heavy duty, hydraulic floor springof150kilogramcapacity,having heavy duty concealed lock, necessary beading,glazingclips,pvcgaskets,250mm length tower bolts, 150mm diam. pad handle, etc. as per detaileddesignanddrawingor as directed byengineer in charge including all materials,labours, andequipment etc.complete(as directed by engineer-in-charge) 4 providing and fixing in position gypsum board false ceiling with 12.5 mm thick gypsum boards, screwed/fixed to the under structure of suspended g.i. grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. the gypsum board should be fixed to galvanized iron grid with necessary screws. the boards should be taped and filled from underside to give smooth, seamless ceiling. the rate should include necessary additional ceiling sections and intermediate channels. additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete(as directed by engineer-in-charge) 5 providing and applying two coats of wall care putty on plastered surface and ceiling and walls to prepare surface even and smooth of approved make, etc complete. 6 providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete. 7 providing and fixing rollar blinds ami make or approved make & shade of 38mm round aluminiumchannelwithblackoutfabric&teltingwithchain(ball)systemwithall necessaryfixturesandfittingetc.complete.(sampletobefinalby engineer-in-charge prior execution of work) 8 providingand fixing 1.5 mm thick polyvenyl venyl chlorideflooring includingleveling thebasewithwhitecementincludingpastingwithappropriatematerialcleaningthe surface etc. complete 9 executive table @ 2250lx2100dx750ht including low height credestal @ 1200lx450dx650htproviding&fixingoftable @2250lx2100dx750httop& gable end to be made ofmembrane finish with soft water fall edges & curved panel &decoratedanodizedsectionmodestypaneltobemadeof18mmthick prelaminated particle board with pvc edge band. including credestal @ 1200l x 450d x 650h:- to be made out of membrane finish ( 2 openable shutter & 3 drawerpedestal in between ) as per drawing. 10 free standing table @ 1500lx600dx750htprovidingandfixingtableofsize1500x600x750mm.top:madefrom25mm prelaminatedparticleboard. alledgesarecoveredby2mm.thk.pvcedgebands glued by hot melt glue applied by auto edge banding machine.legs : c shape made from crca sheet with powder coat finish. modesty panel : made from 18mm both side prelaminated particle boards.all edges are covered by 0.8mm pvc edge bands glued by hot melt glue applied by auto edge banding machine.keyboard tray(withoutmousetray):- metalpowdercoated-blackcolor,cpu trolley:- metalpowdercoated-blackcolor,3drawerpedestalunit having overall size 392l x 450d x 680ht. mm. with central lock and key. drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board. 11 free standing table @ 1350lx600dx750htprovidingandfixingtableofsize1350x600x750mm.top:madefrom25mm prelaminatedparticleboard. alledgesarecoveredby2mm.thk.pvcedgebands glued by hot melt glue applied by auto edge banding machine.legs : c shape made from crca sheet with powder coat finish. modesty panel : made from 18mm both side prelaminated particle boards.all edges are covered by 0.8mm pvc edge bands glued by hot melt glue applied by auto edge banding machine.keyboard tray(withoutmousetray):- metalpowdercoated-blackcolor,cpu trolley:- metalpowdercoated-blackcolor,3drawerpedestalunit having overall size 392l x 450d x 680ht. mm. with central lock and key. drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board, 12 free standing table @ 1200lx600dx750htprovidingandfixingtableofsize1200x600x750mm.top:madefrom25mm prelaminatedparticleboard. alledgesarecoveredby2mm.thk.pvcedgebands glued by hot melt glue applied by auto edge banding machine.legs : c shape made from crca sheet with powder coat finish. modesty panel : made from 18mm both side prelaminated particle boards.all edges are covered by 0.8mm pvc edge bands glued by hot melt glue applied by auto edge banding machine.keyboard tray(withoutmousetray):- metalpowdercoated-blackcolor,cpu trolley:- metalpowdercoated-blackcolor,3drawerpedestalunit having overall size 392l x 450d x 680ht. mm. with central lock and key. drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particleboard, 13 conference table @ 3600lx1400dx750htproviding&fixingofmaintable@3600lx1400dx750ht-madeupof18+18mm thickmdftopwithpvcmembranefinishandwaterfalledgeprofile.aluminium anodizied finish beeding of 4mm thich is running all over the table top edge. gable ends is aerofoiled shape with front edges in pvc membrane finish and rest in prelaminated mdf with batton structure. gable ends should be hollow from inside for the provision of passingelectrical and datawiring. ,modesty panel:- to bemade of18 mm thick prelaminated particle board with pvc edge band access flap:- for wire manager 2 nos. 14 providing & arrangemnt of high back, synchronized mechanism with multiple locking, adjustable armrest, gaslift for seat height adjustment, standard 5-prong p/nylon basewith leatherite upholstery 15 providing & arrangemnt of high back, synchronized mechanism with multiple locking, adjustable armrest, gaslift for seat height adjustment, standard 5-prong p/nylon base with leatherite upholstery 16 providing&arrangemntofmidback,normalsyncro mechanism,fixedarmrest, gaslift for seat height adjustment, standard 5-prong/nylon base with leather upholstery 17 public seating chair. - 3 seaterproviding and fixing 3 seater public seating chair made of complete metal with legs in crome finish and seates in silver powder coating finish. 18 tea table 900mm x 750mm x 450mm for m.s. ante chamberprovidingandfixingofteatable900mmx750mmx450mmwith12mmthick coloureitchedtemperedglasswithbevelleddrawingmadeout of18mmthick waterproofingply.theouterlacestobefinishedwithhighquality4mmthik veneer or 1 mm thik mica etc. 19 kitchen trolleyprovidingandfixingstainlesssteelkitchentrolleyofoverall26heightand22 depth,supported on aluminium pipes ,trolley basket made out of 5 mm stainless steel rod fitted on telescopic channel of size 1.5 x 20 x 22 on both sides of trolley of 12 or above size, panel having 40kilogramload bearing capacity of trolley made out of 20 mm puccoatedplywoodandcolourcombinationasdirectedbye-i-c.innersideofpanel covered by white mica ,100 mm s.s. decorative handle.(the width and height of individual compartments shall be kept as directed by engineer-in-charge) 20 providing andfixing 450mm x550mm size superiortype belgium mirrorwith16mm dia. nickel plated towel rod etc. complete. 21 providing andconstructing granite kitchenplatform withfixing of stainlesssteelsink 600 mm x 450mm size as per detaileddrawing including vertical bothside polished kadappah stone 25 to 30 mm thick supports with kadappahtop 35 to 40 mm thick and polishedgranite16to20mm topwithsidestripsofgraniteatfrontandbothsidesof platform raised with two verticalgranitesupports15cmheightandtopgraniteof 75x40cmincludingcutting, opening for sink of required size in kadappah as well as granite etc. complete. (platform top size 5.00 m x 0.60 m and height is 0.75 m) 22 providing and laying vitrified mirror / glossy finish tiles decorative typehaving size 590 mm to605mm x590mm to605mm of8to10mm thicknessandconfirmingtois. 15622-2006(groupbla)ofapprovedmake,shadeandpatternforflooringinrequired positionlaidonabedof 1:4 cement mortar including neat cement float, filling joints,curingandclearing etc. complete. 23 providing and laying ceramic tiles ofhaving size 30 cm. x 30 cm. and confirming tocorrespondingi.s.fordadoandskirtinginrequiredpositionwith readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. 24 providing projector - resolutation- xga, white brightness-3300ansi lumens,colour brightness-3300ansi lumens,contrast ratio- 15000:1,lamp life - 6000 hour,weight- aprox 2.5 kg, up to 3x briter colourincluding proector screen-6*4 with stand, with 15 m. hdmi cable and instalationcomplete 25 electrification work 26 supplying anderectingpvctrunking (pvccasing-n-capping)ofsize32 mm with accessorieson wall/ceiling as per specification no: wg-ma/con. 27 supplying and erecting mains with 2x1.5 sq.mm frlshcopperpvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no: wg-ma/bw 28 supplying and erecting mains with 2x2.5 sq.mmfrlsh copper pvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no: wg-ma/bw 29 supplying and erecting mains with 2x4 sq.mm frlsh copper pvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no: wg-ma/bw 30 supplying and erecting mains with 1x1.5 sq.mm frlshcopperpvc insulated wire (earthing) laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no: wg-ma/bw 31 point wiring for light/bell/exhaust fan in pvc trunking (casing-capping) with 1.5 sq.mm (2+1e) frlsh grade copper wire, modular type switch, earthingand required accessories as per specification no: wg-pw/sw 32 point wiring for independent plug in pvc trunking (casing-capping) with 1.5 sq.mm(2+1e) frlsh grade copper wire, modular type switch,earthing and required accessories as per specification no: wg-pw/sw 33 wiring for plug on board withswitch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification no: wg-pw/cw 34 supplying and erectingmodular type switch 16 / 20 awith indicator,duly erected on provided plate and box with wiring connections complete. 35 supplying and erectingmodular type 3 pin 6 / 16amultisocket with safety shutter,duly erected on provided plate and box with wiring connections complete. 36 supplying and erectingmodular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. 37 supplying & erecting decorative pre-wired box type fitting/batten suitable for 4 feet, t8 led tube light (excluding tube light). 38 supplying and erectingled square / circular max. 14 w down lighter/panel light having pressure die-cast aluminium housing,polystyrene diffuser havingsystem lumens output of min. 1500 lumens, min. efficacy of 110 lumen/w, cri>80, cct upto 6500k, beam angle of 120 deg., max. ripple of 5%,thd<10%, p.f. >0.95, operating range of120-270v, surge protection of 2.5 kv, life class of 50,000 hrs. at l70b50,including driver,having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. 39 supplying and erectingenergy saving ceiling fan 230 v a.c. 50 cycles 1200 mm complete erected in position as per specification no. fg-fn/cf 40 supplying and erecting fan hook of 10 mm. m.s. round bar grouted in rcc slab with making the site as original. 41 supplying, erecting & marking spmcb 6a to 32a, c-serieswith rated short - circuit breaking capacity (icn) 10ka in provided distribution board as per specification no. sw-swr/mcb 42 supplying&erectingtriplepoleand neutral distribution board (tpndb), sp/tp mcbs total 8 ways /24 poles, with door, 1.2mm thickness surface/flush mounted, ip 43 protection on iron/gi frame (vertical busbar type) as per specification no. sw-swr/mcbdb 43 providing & erecting 3 pole mccb, 415 v, 100a, rated short-circuit breaking capacity 25 ka (ics=100% of icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/uv/trip alarm contact.mccb with phase barriers on both sides, insulation withstand capacity 800v, no line-load bias in provided enclosure/panel as per specification no. sw-swr/mccb 44 supplying & erecting crca sheet metal enclosures of 1.2mm thickness with 20a, 2 pin plug & earth socket and 20a, 3 pin plugtop with 20a/30a single pole mcb having rated short - circuit breaking capacity (icn) 10ka complete erected on angle iron/ gi frame. 45 supplying, erecting & terminatingfr xlpe insulated, galvanised steel formed wire armoured (strip) cable 1100 v, 3½ core35sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. cb-lt/al 46 providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results asper specification no. ea-ep 47 supplying and erecting copper strip of high purity required size used for earthing on wall and/or any other purpose with necessarycopperclampsfixed on wall painted with bituminous paint with joints required. as per specification no. ea-ep. 48 supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor. room air conditioning unit 1.7tr to 2.0tr capacity having iseer minimum 5.0 suitable to operate on 250v, 50 hz, a.c. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant r32 having copper condenser, minimum 2.5pm filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dba at position in provided recess with wooden frame complete specification no. ap-ac/wac 49 supplying and erecting led panel light(600mm x 600mm) max. 30 w having crca powder coated housing, polystyrene diffuser having system lumens output of min. 3600 lumens, min. efficacy of 120 lumen/w, cri>80, cct upto 6500k, beam angle of 120 deg., max. ripple of 5%, thd0.95, operating range of 120-270v, surge protection of 2.5 kv, life class of 50,000 hrs. at l70b50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Local Bodies

TRN :48925254 | 10 May, 2025

Tender Value : 13.87 Lacs

Jaisalmer - Rajasthan

Tender for rate contract/tender for work including door-to-door (residential and commercial) garbage collection and separation, road and drain cleaning and community sanitation complex cleaning in all villages of gram panchayat bandheva

Local Bodies

TRN :48885468 | 12 May, 2025

Tender Value : 1.00 Crore

Nagaur - Rajasthan

Tender for tender for supply of construction material - ghadhla kankar jhajhrha mud masala , lime , cement , fine aggregate , fly ash , sand gravel , grit stone brick , stone pattiya , precast tiles , vitrified , cement interlocking wood with fitting , iron , structural steel , winding wire , iron girder , barbed wire , iron net , glass color paint , modular socket outlet , enamel paint ., bitumen tax board , g i sheet , sheet , pipe , road roller , truck , vehicle hiring , compressor , dumper , tractor with scraper , ghisai machine operator , cultivator , manpower services , rolling shutter, ferro cover , tiles , stone , kerb stone , pipe , putti , , varnish , flange , g i band , sluice valve , submersible pump set , sing phase head , handpump , connecting rods , fly ash brick , ordinary soil , hard soil , disintegrated rocks etc

Central Government/Public Sector

TRN :34438887 | 16 May, 2025

Tender Value : 0

Leh Ladakh - Jammu And Kashmir

Tender for gem bids for 4 mp image stabilizer based ir ptz 30x camera , 5 mp ir varifical bullet network cemera ik 10 ip66 , 8 channel nvr with 4 terabyte surveillance hdd with monitor , 32 channel nvr with 32 tb surveillance hdd , poe switch 8 port 150w 250 mts , 12u all weather rack , 1100 va solar inverter with 12 hours backuop on each node , 500 va solar inverter with 12 hours backuop on each node , outdoor all weather cat 6 cable 300 meter roll , broad band radio links , omni directional antenna , power cable 2.5 sqmm 3 core 400 meter roll , display for control room , desktop for cms software , pole mast 20 feet , 5 kbva online ups

Central Government/Public Sector

TRN :34438983 | 16 May, 2025

Tender Value : 0

Ranchi - Jharkhand

Tender for gem bids for compressor part no rd510725op , compressor oil part no rd57103op , condensor part no rd46847op , valve part no rd58076op , blower motor aaly part no rd5129331p , condensor fan assly part no rd586276p , expansion valve part no rd570150p , receiver drier assy part no rd572720p , reciever dryer part no rd5109440p , pressure switch part no rd595770p , hose 50 ft part no rd55006600p , hose 50 ft part no rd55008600p , hose 50 ft part no rd55010600p , ftg 10 charging port part no rd572310p , ftg 10 male straight part no rd569510p , number 8 female 90 dig charging put part no rd572250p , number 8 female 90 dig part no rd568400p , number 6 male straight part no rd578050p , number 6 female 90 dig part no rd569450p , ftg number 6 male 90 deg band part no rd569440p , refrigerant gas part no r134a

Related Searched Keywords : c band

List of c-band Tenders

Tender for construction of cc road and drain from banda sagar road to pankaj tiwaris house via laleshwar temple in village shah of development block bahua

Tender for rate contract/tender for work including door-to-door (residential and commercial) garbage collection and separation, road and drain cleaning and community sanitation complex cleaning in all villages of gram panchayat bandheva

Get c band Tender Alert...

Related Searched Keywords : c band

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us