Filters

List of ci-plate Tenders

List of latest ci-plate Tenders in Indian Tenders. Click on any ci-plate Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for ci-plate Tenders.

All-Tenders (127)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :49057888 | 19 May, 2025

Tender Value : 0

Una - Himachal Pradesh

Tender for gram panchayat mazara, block and district una invites tenders for the supply of the following construction materials and others for the development works to be done under various items for the financial year 2025-2026:- gravel keshar 10mm, 20mm, gutka crusher 40mm, sand washed crusher, sand local, soil (per cubic meter), gravel and gutka gola (per cubic meter), brick (ist class) (per), rebar (isi tmt) 16,12,10,8 mm (per kg), pipe iron squre3x1.6, 1.6 x 1.6, 1x1, forged iron squre 32mm, cgisheet coated 8, 10, 12, 16 (per), pvc pipe is18, 6, 4, 2 40 (per meter), white cement (per kg), interlocking tiles (isi) (per sq. ft.), wall & floor tiles (151) (per sq. ft.), marbel (per sq. ft.), paint wood / iron, distemper material, emulation paint (plastic paint) (151) (per litre) & other paint items, rent shuttering wood, iron plate, scape folding (per sq. metre), rent mixture (per day), rent water tank (per day), carriage cement h.p state civil supplies from jalgran to ajouli (per bag), rent local trip tractor-trolley within 04 km. rent jcb (per hour), rent excavator (per hour), steel iron railing (per foot), gymeqpts, water tank plastic isi (500, 1000 litres), steel/iron bench,, bore well recharge complete in all respect (per meter) out door display size 4x6 p6 whether proof, announcement content pa eqptsahuja complete with 4/5/6 horns with fitting & fixing, cctv ip fiber based camera smp with audio color night vision wth 32 inch led tv with fitting & fixing and complete in all repect, split ac (isi) complete with fitting & fixing 1.5 ton & 2 tons, sanitary wares/ plumbing/ drainageltems, allmuniaum partition with door size 6.6 feet x 4 feet complete with fitting&fixing, paper a4 size (70 gsm) for printers, refilling printer cartriges 12a, 925a, amc automatic compostermachine smartenviro500 kgs & 150 kgs, amc led street lights, mikhi raj and laborer with bank account and aadhar card.

State Government

TRN :49057999 | 23 May, 2025

Tender Value : 0

Ghaziabad - Uttar Pradesh

Tender for tender for construction of civil works for increasing capacity from (1x500 plus 2x315 mva) to (2x500 plus 1x315 mva) at 400 k.v. sub-station-ist muradnagar ghaziabad. - earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) all kinds of soil including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by engineer-in-charge. 2 excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also includingramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all 3 providing and laying in position cement concrete of specified grade 1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)excluding the cost of centering and shuttering - all work up to plinth level : 4 providing and laying in position cement concrete of specified grade 1:5:10 (1 cement : 5 coarse sand (zone-iii) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)excluding the cost of centering and shuttering - all work up to plinth level : 5 providing and laying in position cement concrete of specified grade1:1½:3 (1 cement: 1½ coarse sand (zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) excluding the cost of centering and shuttering - all work up to plinth level : 6 providing and laying in position specified grade of reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand (zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources), excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level : 7 centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete 8 centering and shuttering including strutting, propping etc. and removal of form for walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. 9 centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platform 10 centering and shuttering including strutting, propping etc. and removal of form for columns, pillars, piers, abutments, posts and struts. 11 providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). 12 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. thermo-mechanically treated bars of grade fe-500d or more. 13 brick work in foundation & plinth with old dismantled bricks (supplied by department free of cost) and coarse sand mortar in 1:6 including supply of all other materials, labour, removing mortar & cleaning of old & used bricks,t&p etc complete . 14 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand). 15 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand). 16 dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with jamuna sand, with common burnt clay non modular bricks 17 supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of engineer-in-charge . 18 structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 19 mild steel or iron work in heavy sizes such as trusses built up gates, door frames, record, racks roof workgates etc. wrought to required form including holes rivetting or welding where necessary and also fixingin proper position and alignment but when steel is to be provided by the department . 20 12 mm cement plaster of mix 1:4 (1 cement: 4 coarse sand). 21 extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturers specification. 22 extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. 23 neat cement punning 24 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. 25 demolishing cement concrete (nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)) manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 26 demolishing brick work in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. 27 dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. 28 demolishing r.c.c. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars. 29 dismantling of existing pale / security / chain link fencing including post and stacking properly as per direction of the engineer - in - charge. including all labour and t&p etc. required for proper completion of the work 30 disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 31 supply of 25 mm. dia m.s. anchor bolts (conforming to is 266)500 mm. long with base plate (50x50x6mm) welded with anchor boltsincluding its threading upto a length of 10cm. and also supplyof a pair of galvanized standard nuts with threading including supply of 5 mm thick washer and cost of labour, material & t&p for proper completion of work 32 fixing and grouting 25 mmand below dia m.s. anchor bolt in proper alignment level and setout with the help of a template including supply of all labour t&p etc. reqd. for proper completion of the work. (labour rates only) . 33 grouting of 90/105 lbs m.s. railincluding cost of all materials,labour & t&p for fixing of rail in proper alignment, leveland position in transformer plinth foundation etc. as perdirection of eng i/c. (rail to be supplied by thedept.)(labour rates only) . 34 s/f in position 105 lbs m.s. rail for transformer plinth including cost of all labour, material and t&p etc. required for proper completion of the work. 35 fixing and grouting of trench edging in proper level and alignment including cost of all labour, and t&p etc. required for proper completion of the work but excluding cost of c.c. (labour rates only) . 36 fixing of template in position level and alignment for groutingof anchor bolt in auxiliary gantry (labour rate only). 37 fixing of cable trench racks in proper position and alignment including cost of all labour, material and t&petc. required for proper completion of the work (labour rate only). 38 fabrication of template forauxiliary foundation including cost of all labour, and t&p etc. required for proper completion of the work. steel shall be arranged by contractor free of cost. this template shall be property of contractor.(labour rate only). 39 4.0 cm thick 1:1.5:3 plain cement concrete floor with cement, approved coarse sand & 2cm gradedapproved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement andmarble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels ifany and giving them a uniform finish including supply of all materials, labour and t&p etc, required forproper completion of the work. without base cc 40 placing of trench cover of all size in proper position including transportation from different places withinthe s/s area including all labour, t&p etc. required for proper completion of the work as per direction ofengineer - in - charge. 41 preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres. 42 providing and laying swr, pvc ( finolex or equivalent ) pipe including cost of excavation, c.c etc including its jointing and connection, all materials, labour and t&p etc. required for proper completion of the work (110mm dia pipe) 43 providing and laying design mix cement concrete of m-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy m.s. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of engineer-incharge (item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately).cement concrete manufactured in automatic batching plant (rmc plant) i/c transportation to site in transit mixer 44 providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood pre-laminated one side decorative lamination and other side balancing lamination grade i, type ii, is : 12823 marked, including priming coat on unexposed arrangement and screws etc. complete : (12mm thick partical board) 45 hiring of beldar(labour).

State Government

TRN :49059083 | 15 May, 2025

Tender Value : 17.24 Lacs

Amroha - Uttar Pradesh

Tender for tender for re-electrification work of office building of state tax department (g.s.t) in dist.amroha. - rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable and 1.5 sq.mm frls pvc insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/pvc conduit including dismantling as required. group c 2 supplying and fixing following size/ modules, gl box along with modular base & cover plate for modular switches in recess etc. as required.1 or 2 module (75mmx75mm) 3 supplying and fixing following size/ modules, gl box along with modular base & cover plate for modular switches in recess etc. as required.3 module (100mmx75mm) 4 supplying and fixing following size/ modules, gl box along with modular base & cover plate for modular switches in recess etc. as required.4 module (125mmx75mm) 5 supplying and fixing following size/ modules, gl box along with modular base & cover plate for modular switches in recess etc. as required.6 module (200mmx75mm) 6 supplying and fixing following size/ modules, gl box along with modular base & cover plate for modular switches in recess etc. as required.8 module (125mmx125mm) 7 supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 a switch 8 supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 2 way 5/6 a switch 9 wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required. group c 10 rewiring for twin control light point with 1.5 sq.mm frls pvc insulated copper conductor single core cable and 1.5 sq.mm frls pvc insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/pvc conduit including dismantling as required. 11 supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required.1x1.5sq. mm (for inverter wiring ) 12 wiring for circuit/ submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required.2x 1.5sq. mm + 1 x 1.5 sq. mm earth wire 13 same as above but for 2x 2.5sq. mm + 1 x 2.5 sq. mm earth wire 14 same as above but for 2 x 4 sq. mm + 1 x 4 sq. mm earth wire 15 same as above but for 2 x 6 sq. mm + 1 x 6 sq. mm earth wire 16 same as above but for 2x10 sq. mm + 1x6 sq. mm earth wire 17 same as above but for 4 x 16 sq. mm + 2 x 6 sq. mm earth wire 18 supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. 19 supplying and fixing single pole blanking plate in the existing mcb db complete etc. as required. 20 supplying and fixing suitable size gl box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 a modular socket outlet and 5/6 a modular switch, connections etc. as required. 21 supplying and fixing suitable size gl box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 a modular socket outlet and 2 nos. 5/6 a modular switch, connections etc. as required. (for light plugs to be used in non residential buildings). 22 supplying and fixing suitable size gl box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 a modular socket outlet and 15/16 a modular switch, connections etc. as required. 23 supplying & fixing suitable size gl box with modular plate and cover in front on surface or in recess including providing and fixing 25 a modular socket outlet and 25 a modular sp mcb, c curve including connections, painting etc. as required. 24 supplying and fixing 3 pin, 5 a ceiling rose on the existing junction box/ wooden block including connections etc. as required. 25 supplying and fixing pvc batten/ angle holder including connections etc. as required. 26 supplying and fixing call bell/ buzzer suitable for single phase, v, complete as required. 27 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (but without mcb/rccb/isolator) 6 way , double door 28 same as above but for 12 way , double door 29 supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 v, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (but without mcb/rccb/isolator) 4 way (4 + 12), double door 30 supplying and fixing of following ways surface/ recess mounting, vertical type, 415 v, tpn mcb distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 a tinned copper bus bar, common neutral link, earth bar, din bar for mounting mcbs (but without mcbs and incomer ) as required . 4way (4 + 12), double door 31 supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. single pole 32 supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. double pole 33 s&f of 40 amp. sp mcb (10 ka)cat a 34 s&f of 40 amp. dp mcb (10 ka)cat a 35 s&f of 63amp. sp mcb (10 ka)cat a 36 s&f of 63amp. dp mcb (10 ka)cat a 37 s&f of 63amp. tp mcb (10 ka) c curve cat a 38 s&f of 63 amp. 4 pole mcb(10 ka)c curve cat a 39 s&f of 80to 100 amp4 pole mccb (16 ka)thermal magnetic release cat a 40 s&f of 160amp4 pole mccb (16 ka)thermal magnetic release 41 earthing with g.i. earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 42 providing and fixing 25 mm x 5 mm g.i. strip on surface or in recess for connections etc. as required. 43 supply, installation, testing and commissioning of 1200 mm sweep, bee 5 star rated, ceiling fan with brush less direct current (bldc) motor, class of insulation : b, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value (cmm/w) minimum 6.85, air delivery minimum 215 cmm, 350 rpm (tolerance as per is : 374- 2019), thd less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree c (max.), insulation resistance more than 2 mega ohm, suitable for 230 v, 50 hz, single phase ac supply, earthing etc. complete as required. 44 installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. 45 supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required. 2 x 10 sq. mm (19mm) 46 same as above but for 4 x 16 sq. mm (28mm) 47 same as above but for 3.5 x 70 sq. mm (38mm) 48 same as above but for 185 sqmmx3.5 core 49 supplyandlayingofaluminiumconductorpvcinsulatedarmouredservedsheathedcables1100volts gradeon wall/surface the cable run shall be fixedon m.s. clamps etc. of suitable size or asdirectedbytheengineer-incharge, completeinall respect.thearmouringofthecableshallbeproperly connected with the earth conductor by clamps etc.10 sq. mmx 2 core 50 same as above but for 16 sq. mmx4 core 51 same as above but for 70 sq. mmx3.5 core 52 same as above but for 185 sq. mm 3-1/2 core 53 supply, installation, testing and commissioning of lt panel vermin proof floor mounting , m.s. channelbase with bottom and fabricated out of 2.0/1.6mm thick crca sheet steel, painted with powder coated paint of shade as per the direction of engineer in-charge after proper sheet treatment process of sheet steel. the bus bar of panel shall be of electrical grade high conductive aluminum alloy of appropriate cross section as per rating.the main bus bar shall run throughout the panel of rating as main incomer rating. the bus bar shall be supported by non hygroscopic smc/dmc bus bar supports which shall be mounted on proper interval to ensure the bear the jerks of short circuit of 50ka for panels having acb as incomer & 36ka for panels having mccb incomers. panel shall be constructed in fully segregated compartment design for each feeder as per 3b construction format. the panel shall be completed in all respect as per is: 8623 part-2&3. there shall be separate metering compartment for incomer metering and outgoing metering.all incomer feeders shall be provided with multifunction metering along with phase indicating lights and other associated components such as ct, control mcb terminal block etc. and all outgoing feeders 100a & above shall be provided with 3 phase ammeter along with phase indicating lights and other associated components such as ct, control mcb terminal block etc. the feeders above shall be provided a accommodated all measuring instruments shall be digital type & all indicating lights shall be led type. wiring shall be done from 1100v grade pvc insulated copper flexible wire. all acb shall be electrically operated draw-out type with microprocessor based o/l, s/c & e/f release of breaking/ withstand capacity (icu/ics/icw) 50ka or more all mccb shall be thermal magneetic/microprocessor with o/l & s/c protection along with required spreaders & extended rotary handle with pad locking facility of breaking capacity (icu/ics) 36ka or more all mcb shall be thermal 10ka c curve. cubicle type switch board shall be cat-a and b only. incoming 400 amp mccb -1 no& outgoing 200 a mccb-1 no., 100 a mccb-2 nos. & 63 a mccb-1 no. 54 supply and fixing of 18-22w led batten fitting with extruded aiuninumn housing, special polycarbenate difluser for glare free light distnbution and suitable mounting for on both surface & suspended. compelete in all respect. 1980-2420 syslem lumens, >110 lm/w, pf>0.95, thd<10%, cri >80, with 3 year warranty. 55 supply and fixing of led tube light with heavy duty metal box type batten light fitting 2x22 watt suitable for upto 2x22 watt led polycarbonate tube light complete including tube suitable for both surface & suspended complete in all respect. 2x2640 sy stem lumens, >120 lm/w, pf>0.95, thd<10%, cri >80, sheet thickness min. 0.8mm, tube with aluminium heat sink. >300v over voltage protection, 2.5 kv internal surge protection, with 5 year warrantee cat-aaa 56 s/f of ip 20, front lit, mid power smd type led light, recesssurface mounting round 10 watt to 15 watt , cut out min 125 mm, height min 40 mm,, led down lighter having powder coated die cast aluminiun housing with heat sink, high purity transmisivity uv stabilized non yellowish diffuser reflector for unifom light distribution, detachable driver set, stable for 24 hr continous operation, complete in all respect 1100-1650 system lumen, >110 lm/w, pf>0.95, thd <10% at full loàd, cri >80, with 3 years warranty. 57 s/f of water tight oblong 10wled bulk head luminaire havingdie cast alluminium housingwithdriver set confirming to ip 65 and above protection ,suitable for 24 hrs. continuous operation,complete in all respect.1100 system lumens, 110 lm/w. pf>0.95, cri>70, with 3 year warranty.cat aa 58 supply and fixing of led street light fitting withmandatory driver set having die cast aluminium body with toughend glass/ uv stabilized pc cover and lenses suitablefor 75 watt. to 90 watt and confirming to ip 66, and ik07 and above protection having company logo engraved complete in all respect including labour.9000-10800 system lumens, high power led with lenses,120 lm/w, pf>0.95, thd <10% at full load, cri >70,,potted driver set in metal housing (not circuitory) phase to phase protection at 440v & >300v auto cut and re-startfeature, with 5 years warrantee. 59 s/f of led bulb 12 watt 60 supply of fresh air fan300 mm sweep metalic complete in all respect. 61 supply of heavy duty exhaust fan 300 mm sweep 900/1400 rpm 62 s&fof200amp.fourpolechangeoverswitchon50mmx 50mmx6mmangleironframe,includingthecostoflabour, t&p,paintingandothermaterialrequiredforproper completionoftheworkasperdirectionandsatisfactionofengineer in charge. 63 s/f of rubber matting1800x900x12 mm tested and chequred 64 supplyandfixingoffireextinguisher,abctype4.00 kg.capacity(isimarkedis: 15683& tacapproved) complete with initial charge and wall bracket, along with supply of all materials andlabour for proper completion of work. 65 supply andfixingofc02typefireextinguisher4.5kg. capacity (isimarkedis:2878&tacapproved) complete with initial charge and wall bracket, along with supply of all materials andlabour for proper completionof work.

Central Government And Public Sector

TRN :49059263 | 17 May, 2025

Tender Value : 14.93 Lacs

Howrah - West Bengal

Tender for tender for structural strengthening and external painting of b e college t e howrah; 1 demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2 nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 3 dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 4 of area 3 sq. metres and below 5 dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 6 for thickness of tiles 10 mm to 25 mm 7 dismantling c.i. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of engineer-in-charge: 8 up to 150 mm diameter 9 dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 10 disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 11 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 12 1:2:4 (1 cement : 2 coarse sand(zone-iii) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 13 reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 14 1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 15 reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources). 16 reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii)derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources). 17 centering and shuttering including strutting, propping etc. and removal of form for : 18 foundations, footings, bases of columns, etc. for mass concrete 19 columns, pillars, piers, abutments, posts and struts 20 vertical and horizontal fins individually or forming box louvers band, facias and eaves boards 21 small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like 22 smooth finishing of the exposed surface of r.c.c. work with 6 mm thick cement mortar 1:3 (1 cement : 3 fine sand). 23 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 24 providing and fixing fiber glass reinforced plastic (frp) door frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. the laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. the frame shall be covered with fiber glass from all sides. m.s. stay shall be provided at the bottom to steady the frame. 25 providing and fixing to existing door frames. 26 30 mm thick glass fibre reinforced plastic (frp) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick frp laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick frp laminate for panels conforming to is: 14856, including fixing to frames. 27 steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 28 in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 29 providing and laying rectified glazed ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1stquality conforming to is : 15622, of approved make, in colours white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4(1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. 30 providing and fixing on wall face unplasticised - pvc moulded fittings/accessories for unplasticised rigid pvc rain water pipes conforming to is 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion. 31 single tee with door -110x110x110 mm 32 bend 87.5° -110 mm bend 33 15 mm cement plaster on the rough side of single or half brick wall of mix : 34 1:6 (1 cement: 6 fine sand) 35 finishing walls with acrylic smooth exterior paint of required shade : 36 new work (two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) 37 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 38 two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. 39 removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 40 dismantling w.c. pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of engineer-in- charge. 41 providing and laying app (atactic polypropylene polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the samemembrane manufactured of density at 25°c, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. the vital physical and chemical parameters of the membrane shall be as under : joint strength in longitudinal and transverse direction at 23°c as 350/300 n/5 cm. tear strength in longitudinal and transverse direction as 60/80n. softening point of membrane not less than 150°c. cold flexibility shall be upto -2°c when tested in accordance with astm, d - 5147. the laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 42 3 mm thick 43 providing and fixing white vitreous china pedestal type (european type/ wash down type) water closet pan. 44 providing and fixing p.v.c. low level flushing cistern with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete. 45 10 litre capacity - white 46 providing and fixing solid plastic seat with lid for pedestal type w.c. pan complete : 47 white solid plastic seat with lid 48 providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. 49 providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c. waste fittings complete. 50 flexible pipe -32 mm dia 51 providing and fixing ptmt bib cock of approved quality and colour. 52 15mm nominal bore, 86 mm long. weighing not less than 88 gms. 53 providing and fixing ptmt stop cock of approved quality and colour. 54 15 mm nominal bore, 86 mm long. weighing not less than 88 gms. 55 providing and fixing ptmt pillar cock of approved quality and colour . 56 15mm nominal bore, 107 mm long. weighing not less than 110 gms. 57 providing and fixing unplasticised p.v.c. connection pipe with ptmt nuts, collar and bush of approved quality and colour. 58 15 mm nominal bore with 45 cm length. 59 chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of engineer-in-charge 60 75 mm average thickness 61 50 mm average thickness 62 25 mm average thickness 63 cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of engineer-in-charge. 64 bars upto 12 mm diameter 65 bars above 12 mm diameter 66 providing, mixing and applying bonding coat of approved adhesive on chipped portion of rcc as per specifications and direction of engineer-in-charge complete in all respect. 67 sbr polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer 68 providing, mixing and applying sbr polymer (of approved make) modified cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of engineer-in-charge. note: measurement and payment: the pre-measurement of thickness shall be done just after the surface preparation is completed and payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 n/sqmm2). 69 12 mm average thickness. 70 25 mm average thickness in 2 layers. 71 50 mm average thickness in 3 layers. 72 providing and fixing upvc pipes (sch 40 upvc as per astm d- 1785 pipes) including all upvc plain and brass threaded fittings. including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step upvc solvent cement and testing of joints complete as per direction of engineer in charge. internal work- exposed on wall 73 15 mm nominal bore 74 20 mm nominal bore 75 25 mm nominal bore 76 uprooting and removing small plants from the surface of walls, parapet, etc. at any height by cutting chase for removing roots and using necessary chemicals etc. to prevent further growth of plants and mending good damages complete. 77 a) small plant of girth of exposed stem up to 75mm 78 providing and fixing soil waste and vent pipes : 79 110 mm dia upvc soil waste pipe conforming to is:13592 1992 (type-b) manufactured by supreme industries limited or equivalent. 80 erection of single layer bamboo-scaffolding made of average 75 mm dia bamboos with adequate bracing, ties, ropes etc. for strong, stable and workable scaffolding for specified jobs ( above gf beyound 4.00m height) like replacement of sewage/ rw pipes & accessories, repairs to plasters, special repairs, replacement of glass panes, uprooting/ cutting of tree saplings etc including dismantling the scaffolding after the job is done and clearing the site complete as per the direction of the engineer-in-charge. [ projected area of scaffolding frame work on buiding elevation to be measured for payment] 81 felling of trees like banyan, pipul etc from compound walls, building walls, cornices etc by making scaffolding where necessary including cutting of trunks and branches, application of chemicals/weedicides to the remaining portion to kill the growth of tree and ultimately removing the roots from the walls by cutting walls and mending good complete. ( the rate is inclusive of the mending good the walls with bricks/concretes/plasters and disposing of branches/trunks to vats inside compound for further disposal) 82 a) of girth above 30 cm upto 60 cm (measured above 1.0 m from gl toupto 5.0 m height) 83 extra for shifting of existing scaffolding by lifting/dragging or partially dismantling and re-erecting the dismantled portion in position (shifting at least 1.50 m from initial centre line of position) over payment for initial erection & dismantling paid in original item of scaffolding. [ projected area of scaffolding frame work on buiding elevation to be measured for payment] 84 providing and fixing ptmt health faucet with hook and p.v.c. pipe (1.00 metre minm length) of approved quality and colour in w.c.s all complete as per direction of engineer-in-charge. 85 15 mm nominal bore with minimum 1.00 m pvc tube. 86 attending repairs to ms gate by removing corroded portion of gate with welding machine at site and replacing with new members as per actual requirement at site. (cost for labour and hire charges of welding machine including transporation, consumables. steel members will be paid separately) 87 providing and welding 2mm thick m.s. sheet to existing m.s. frame work including providing and appying a priming coat of approved steel primer all complete. 88 providing and fixing upvc floor trap 100mm dia inlet and 100 mm dia outlet. 89 providing and fixing ptmt 2 way bib cock of approved quality and colour, for fixing hand faucet in commode toilets all complete as per direction in charge.- 15mm nominal bore. 90 supplying, fitting and fixing in position fibre glass panes of approved quality with resin, nail, clip etc. as per is:12866-1989. 91 4.0 mm thick (6.72 kg/sq.m) 92 credit value for dismantled unserviceable mild steel/ iron materials. 93 credit value for dismantled g.i. pipes: 94 15 mm nominal dia. 95 20 mm nominal dia. 96 25 mm nominal dia. 97 credit value for dismnatled c.i./ s.c.i. pipes. 98 credit value for unserviciable brass bib/stop cocks/pillar tap

State Government

TRN :49059485 | 31 May, 2025

Tender Value : 70.47 Lacs

Vrindavan - Uttar Pradesh

Tender for tender for construction of rotary at different nodes-1, 2, 3 and 4 at vrindavan yojna, lucknow. - bituminous workdismantling of flexible pavements and disposal of dismantled materials upto a lead of 100 m, stacking serviceable and unserviceable materials separately as per technical specification clause 202. 2 providing and applying primer coat with bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical meansincluding supply of all materials, labour t&p etc. required for proper completion of the work as per mort&h specificationno. 502 (5.1)and as per dierction of the engineer in charge. 3 providing & laying dense graded bituminous macadam with hot mix 100-120 tph hot mix plant producing an average out put of 75 tonnes per hourusing crushed aggregate of specified grading, premixed with bituminous binder,@ 4.0 to 4.5 % weight of total mix and fillertransporting the hot mix to work site, laying with hydrostaticpaver finisher with sensor controller to requiredgrade, level & alignment & rolling with smooth wheeled vibratory and tandem rollers to achieved the desired compaction complete in all respects & as per relevant clauses of mort & h section-507 (vg-30) 4 providing & applying tack coat with bitumen vg-10using bitumen pressure distributor at the rate of 0.35kg/sqm on theprepared bituminous/granular surface cleaned with mechanical broomincluding supply of all materials, labour t&p etc. required for proper completion of the work as per mort&h specification and as per dierction of the engineer in charge. 5 providing & laying bituminous concrete 30 mm withhigher capacitybatch type hot mix plant producing an average out put of 75 tonnes per hourusing crushed aggregate of specified grading, premixed with bituminous binder,@5.4% weight of total mix and fillertransporting the hot mix to work site, laying with hydrostaticpaver finisher with sensor controller to requiredgrade, level & alignment & rolling with smooth wheeled vibratory and tandem rollers to achieved the desired compaction complete in all respects & as per relevant clauses of mort & h section-507 6 providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 grms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per irc:35. the finished surface to be level, uniform and free from streaks and holes. 7 supply and fixing of pavement marker (cat eye) type x - astmd - 4956 - 04 avey dennison / 3 - m (usa make) consisting of asa plastic housing fitted with lightly adherent ploting compound. the housing cell contain prismatic two glass covered presmatic reflective fase to reflect incident light. (rpm with shank as per astm. dar 8.35 8 supply and fixing of monument forrotary including supply of all materials labourt & petc. required for proper complition of the work and as per direction by e/i. (m. r.) 9 retro-reflectivesheeting type-iv with 4 mm thick acm double side:providing & fixing of reflective signs with a corrosion resistant 4 mm thick with 0.4 to 0.5 mm both side aluminium skin aluminium composite panel face to be fully covered with high intensity prismatic sheeting type iv as per irc-67:2012 retro reflective sheeting with back frame ms angle of 35x35x5 mm. legends, letters, numerals and borders etc should be as per morth specification no-801.3.7 the sheeting shall have a pressure sensitive adhesive of the aggressive-lack type requiring no heat. solvent other preparation for adhesion to a smooth clean surface, in a manner recommended by the sheeting manufacturer. the acm (aluminium composite materials) shall be fixed on the back frame ms angle with riveting. micro prismatic type iv retro reflective sheeting confirming to astm d4958-09 shall be pressure fixed. the retro reflective sheeling shall be lested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from international government laboratory/ iristitute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from indian condition within 3 years of launching of product by the manufacture in abroad. aternatively, a certificate conforming to astm specification (d) 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in india can be accepted provisionally, in such a situation, the employer/client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per irc 67:2012 & proof of the same report shall be uploaded which quoting tender. the rate shall include all materiais, labour, t&p, transportation, installation and incidentals all complete as per direction of the engineer-in-charge. uppwd sor 2020-21 ch-26 s.i. no. 11 ref mort&h-801 10 providing and laying of trapezoidal hump/table top speed breaker as per drawing/design including all material, labour, t&p etc complete as per direction of e/i. 11 circular rotary and triangular islandearth work in surface excavation not exceeding 30cm in depth but exceeding 1.5m in width as well as 10sqm.on plan including getting out and disposal of excavated earth upto 50m and lift upto1.5m as directed by e/i. (uppwd sor s.i. no. ch.-7 s.l.-1 ref. dar 2.6.1)0.30m and above 12 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plinth level 1:4:8(1 cement, 4 coarse sand and 8 graded stone agreegate 40mm nominal size). (uppwd sor chap- 8, si no 1, ref to dar 4.1.8) 13 centering and shuttering including strutting, propping etc. and removal of form work for: foundations, footings, bases for columns(uppwd sor chap- 8, si no 3, ref to dar 4.3.1) 14 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plinth level 1:1.5:3 (1 cement, 1.5 coarse sand and 3 graded stone agreegate 20mm nominal size). (uppwd sor chap- 8, si no 1, ref to dar 4.1.2) 15 m.s.iron work in plain work such as reinforced concrete or reinforced brick work wrought to required shape as necessory including bending for proper completion of the work. and including supply of steel its wastage bend hooks and authorised overlapping shall be measured. 16 finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade :new work (two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg /10 sqm )(apex ultima weather coat all guard ) asian, berger also including providing and applying white cement based putty of averge thickness 1 mm of approved brand over the plasterd surface to prepare thesurface even and smooth complete as per direction by e/i. 17 providing and fixing stainless steel (grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, ivc fixing the railing with necessary accessories & stainless steel dash fasteners stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 18 filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc in layers not exceeding 20cm in depth, consolidation each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m. (uppwd sor s.l. no. 4 ref dar 2.25) 19 providing and laying of interlocking concrete block pavement having thickness 80mm as per drwaing and technical specification clause-1504 including earth work in excavation of required depth and width, providing, laying and compacting of w.m.m. and local sand for cussion of tiles etc also including supply of all material, labour, t&p etc complete.

State Government

TRN :49060352 | 16 May, 2025

Tender Value : 0

Thodupuzha - Kerala

Tender for tender for cte-thodupuzha - roofing- 1 roofing work - cte-thodupuzha 2 providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120grams per sqm as per is: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 micronsminimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineerin- charge. the sheet shall be fixed using self drilling /self tappingscrews of size (5.5x 55 mm) with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 3 providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : ridges plain (500 - 600mm) 4 providing and fixing 15 cm wide, 45 cm overall semi-circular plain g.s. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.0.63 mm thick with zinc coating not less than 275 gm/m² 5 steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position andapplying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.hot finished welded type tubes 6 structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a primingcoat of approved steel primer all complete 7 demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge.nominal concrete 1:3:6 or richer mix (i/c equivalent designmix) 8 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stoneaggregate 20 mm nominal size) 9 centering and shuttering including strutting, propping etc. and removal of form for : lintels, beams, plinth beams, girders, bressumers andcantilevers

Government Departments

TRN :49061799 | 13 May, 2025

Tender Value : 0

Bilaspur - Uttar Pradesh

Tender for supply of supply of ci gm and cs casting for season 2025 26 , supply of ci, gm & cs casting items for season 2025-26 , c.i. coupling with pilot bore 12” conversion basis , c.i. coupling with pilot bore 12” fresh supply , 16 teeth sprocket 2” pitch as per drg on conversion basis , 16 teeth sprocket 2” pitch as per drg on new supply , a) g. m. bari and bush gulla on conversion basis , b) gun metal bari and bush gulla new supply fresh , brake assembly brake drum 8” , c) gun metal bari and bush gulla machining charges different size , c.i. casting for boiler purpose as per drg. suitable for boiler use conversion base , c.i. casting for boiler purpose as per drg. suitable for boiler use fresh supply , c.i. casting for boiler purpose as per drg. suitable for boiler use machining charges , c.i. chute for boiler (mouth piece) as per drg.dully machinedconversion base , c.i. chute for boiler (mouth piece) as per drg.dully machined fresh supply , c.i. chute for boiler (mouth piece) as per drg.dully machined , c.i. cross,tee, bends (machining) conversion basis , c.i. cross,tee, bends (machining) fresh supply , c.i. drum of unloder no-2 bridge drg. no.-rb/m-173-a , c.i. gulla all sizes conversion base , c.i. gulla all sizes fresh supply , c.i. gulla all sizes machining charges , c.i. hanger for lipi/texmaco make boilers as per drg on conversion basis , c.i. hanger for lipi/texmaco make boilers as per drg on new supply , c.i. idler pully as per drg. proof machined conversion base , c.i. idler pully as per drg. proof machined fresh supply , c.i. idler pully as per drg. proof machined machining charges , c.i. muff coupling as per drg. fresh supply , c.i. muff coupling as per drg.conversion base , c.i. muff coupling as per drg.machining charges , c.i. scraper texmaco/iseg mill as per drg. proof machined texmaco/iseg conversion baseis , c.i. scraper texmaco/iseg mill as per drg. proof machined texmaco/iseg fresh supply , c.i. scraper texmaco/iseg mill as per drg. proof machined texmao/isegmachining charges , c.i. ventury as per drg. duly machining & drilling , c.i. warm & warm wheel, no. of teeth of wheel 62, no. of teeth of warm 4 1/2, as per drawing rb/m-118a , c.s. bearing housing for isgec mill for top roller as per drg conversion base , c.s. bearing housing for isgec mill for top roller as per drg fresh supply , c.s. bearing housing for isgec mill for top roller as per drg machining charges , c.s. bearing housing for isgec mill side roller as per drg conversion base , c.s. bearing housing for isgec mill side roller as per drg fresh supply , c.s. bearing housing for isgec mill side roller as per drg machining charges , c.s. bearing housing for texmaco mill side roller as per drg. no. 258 conversion base , c.s. bearing housing for texmaco mill side roller as per drg. no. 258 fresh supply , c.s. bearing housing for texmaco mill side roller as per drg. no. 258 machining charges , c.s. bearing housing for texmaco top half roller as per drg. no. rbm-50 conversion base , c.s. bearing housing for texmaco top half roller as per drg. no. rbm-50 fresh supply , c.s. bearing housing for texmaco top half roller as per drg. no. rbm-50 machining charges , c.s. bridge wheel forcane unloader as per drg. , c.s. drum of unloder no-2 bridge drg. no.-rb/m-173-a , c.s. gear & pinion 25mm pitch cane unloder as per drg on conversion basis , c.s. gear & pinion 25mm pitch cane unloder as per drg on new supply , c.s. gear 1 ½” pitch, 25 teeth , c.s. trolley wheel forcane unloader as per drg. , c.s.casting croun piniun grade is 2708 as per drg conversion base , c.s.casting croun piniun grade is 2708 as per drg fresh supply , c.s.casting croun piniun grade is 2708 as per drg machining with teeth profile , c.s.casting mill copling grage is 2708 conversion base , c.s.casting mill copling grage is 2708 fresh supply , c.s.casting mill copling grage is 2708 machining charges , c.s.casting trash plate as per drg conversion base , c.s.casting trash plate as per drg fresh supply , c.s.casting trash plate as per drg machining charges , c.s.gear with pinion gear teeth-60 nos. pinion teeth-22 nos, drg no-rb/m-40 , c.s.gear with pinion gear teeth-64 no. pinion teeth-18 no, drg no-rb/m-01 , c.s.gear with pinion for m.b.c no of teeth on gear-99 no of teeth on pinion-22,pitch-38mm face width-135mm as per drg. , c.s gear set no of teeth on big gear-20, no of teeth on smaller gear-17 pitch-164.85mm face width-95mm , c.s.pinion of crass carrier no of teeth -15 pitch-26.69 mm drg no. rb/m-312 , c.s.pinion of crass carrier no of teeth -17 pitch-26.69 mm drg no. rb/m-311 , c.s.sprocket 2” pitch 12 teeth sprocket as per drg on conversion basis , c.s.sprocket 2” pitch 12 teeth sprocket as per drg on new supply , c.s.sprocket 2” pitch 17 teeth sprocket as per drg on conversion basis , c.s.sprocket 2” pitch 17 teeth sprocket as per drg on new supply , c.s.sprocket 38mm pitch no.of teeth-25 drg. no-rb/m-147 new supply , c.s.sprocket 38mm pitch no.of teeth-25 drg. no-rb/m-147 on conversion basis , c.s.sprocket for bagasse elevator 38mm pitch no.of teeth -95 drg. no-rb/m-247 on conversion basis , c.s.sprocket for bagasse elevator 38mm pitch no.of teeth -95 drg. no-rb/m-247 on new supply , cs pinion cross carrier no of teeth-15, pitch-26.69mm drg.no-rb/m-312 , cs pinion of cross carrier no of teeth-17, pitch-26.69mm drg no. rb/m-311 , g.m. bearing/bearing liner for texmaco & isgec mill as per drg. conversion base , g.m. bearing/bearing liner for texmaco & isgec mill as per drg. fresh supply , g.m. bearing/bearing liner for texmaco & isgec mill as per drg.machining charges , grooving of top & dis. scraper mill texmaco & isgec make as per drg. , m.s. channel/fins w/m type for boiler chimney new supply , s.s. channel/fins w/m type for boiler chimney new supply , teeth cutting in discharge scraper of texmaco/isgec mill.

Government Departments

TRN :49063260 | 13 May, 2025

Tender Value : 0

Bilaspur - Uttar Pradesh

Tender for supply of general electric goods items for season 2025-26 , supply of general electrical goods , alluminium cable lugs all mm size longtail , amp meter c.i. 4x4 0 to 100 ( siemens) l&t / hevells / c&s make , amp meter c.i. 4x4 0 to 150 ( siemens) l&t / hevells / c&s make , amp meter c.i. 4x4 0 to 300 ( siemens) l&t / hevells / c&s make , amp meter c.i. 4x4 0 to 400 ( siemens) l&t / hevells / c&s make , ampere meter size 6x6 3000/5 , anchor make flash type switch 15 amp combind / havells / great white make , anchor make flash type switch 5 amp combind / havells / great white make , angle holder 5 amp anchor / great white make , bakalite sheet 10x12 , bakalite sheet 2x4 , bakalite sheet 8x10 , bare copper wire 4 swg for cane unloader , battery terminal in copper , batton holder 5 amp anchor / great white make , bch make coil , bch make vaccum type meter/timer 110 v (30 sec) , bectrol gray ( dr. back make) 1 ltr , bectrol red ( dr. back make) 1 ltr , bed switch 6 amp anchor / great white make , box spanner set taparia make , brass holder 100x20x20 mm kirloskar / siemens make , brasso 100ml , cable griping paste ( dowells make ) make , capacitor 10 mfd ( falcon / cosco / halcap / havells ) make , capacitor 3.5 mfd( falcon / cosco / halcap / havells ) make , capacitor 4 mfd( falcon / cosco / halcap / havells ) make , capacitor 6 mfd ( falcon / cosco / halcap / havells ) make , carben brush double tail 50x32x22 setkirloskar make , carben brush for cane unloder size set 100x20x20mm kirloskar make , carbon brush 38x22x95 jyoti make , carbon brush 50x25x16 jyoti make , carbon brush 50x40x20 jyoti make , carbon brush holder125,150,250,350 kirloskar make , carbon bush 16x32x40 mm jyoti make / kirloskar make , carbon bush 20x32x42 mm jyoti make , carbon bush 20x32x48 mmjyoti make , carbon bush 20x32x52mm jyoti make , changeover switchtype fp 32 amp, 440 volt , changeover switch 100 amp4 pole l&t / havells / siemens make , changeover switch 320 amp 4 pole l&t / havells / siemens make , changeover switch 400 amp 4 pole , changeover switch 630 amp 4 pole , capacitor2.5 mfd cosco / falcom / halcap / havells make , combination plier 8 tapana / bosch make , connection plate for motor 10 hp kel make , connection plate for motor 100 hp ngef make , connection plate for motor 15 hp kel make , connection plate for motor 150 hp ngef make , connection plate for motor 20 hp kel make , connection plate for motor 25 hp kel make , connection plate for motor 40 hp kel/bbl make , connection plate for motor 60 hp kec with utype make , connection plate for motor 70 hp ngef make , connection plate for motor 75 hp ngef make , cooler pump submersible type khaitan / crompton / easyway / digicod make , copper cable lugs all size longtail , copper conductor for cane unloader , cotton tape 1/2 , cotton tape 3/4 , crc 2-26 415 ml bharat bijke , digital energy meter 400 volt , digital multimeter 0-10000 ac/dc , digital rpm meter with sensor hand oprated , drum controller for box crane , dyno drive 40 hp eddy current controller maqke tranzil engineers , dyno drive controller for 50hp tranzil engineers make , ebonite rod 2 , ebonite rod 3 , end shield 6.3 amp fuse , english electric fuse 50 amp , english electric make hrc fuse 100 a , english electric make hrc fuse 16 a , english electric make hrc fuse 200 a , english electric make hrc fuse 32 a , english electric make hrc fuse 63 a , exhaust fan 12 bajaj / havells / usha make , exhaust fan 18bajaj / havells / usha make , exhaust fan 24bajaj / havells / usha make , fiber glass sleeve 10mm becco kianpathy , fiber glass sleeve 12mm becco kianpathy , fiber glass sleeve 16 amp becco kianpathy , fiber glass sleeve 60 amp becco kianpathy , fiber glass sleeve 8 mm becco kianpathy , film leatherised paper (black) , fix arching contact for ocb met make 200 amp , fix arching contact for ocb met make 400 amp , fix contact for ocb met make 200 amp , foot switch complete for bag stitching machine , foot switch for stitching machine , fuse tinned copper wire 32 amp bharat / goyal / electronijy , fuse wire 10 amp , fuse wire 63 amp , gi bolt 10mm x 75mm f.t , gi bolt 12mm x 100mm f.t , gi bolt 12mm x 50mm f.t , gi bolt 6mm x 25mm f.t , gi bolt 6mm x 75mm f.t , gi bolt 8mm x 200mm f.t , gi bolt 8mm x 50mm f.t , gi bolt 8mm x 75mm f.t , gi nut 10mm , gi nut 12mm , gi nut 6 mm , gi nut 8mm , gi washer 10mm , gi washer 12mm , gi washer 8mm , gi washer 6mm , glass fuse 30 a , glass fuse 5 a , glass fuse 6 a , hrc fuse ns type 63 amp , hylam sheet 6mm thick , ignitor 0-400 watt , insulating varnish ( dr. back make) , insulating varnish (other brand) , insulator for resistance box for 150 hp mei , leather isi paper good quality , led bulb 15 w phillips/syska 230 v , led bulb 20 wphillips/syska 230 v , led street light 200 w syska / bajaj 230 v , led street light 50 w syska / bajaj 230 v , led tube light 100w phillips/syska 230 v , led tube light 50w phillips/syska 230 v , led tube road 20 w phillips/syska 230 v , led tube road 50 w phillips/syska 230 v , m.c.b. 10 amp single pole , m.c.b. 16 amp single pole , m.c.b. 6 amp single pole , magger hd 500v with wire , motor cooling fan (plastic) 10 hp , motor cooling fan (plastic) 12.5 hp , motor cooling fan (plastic) 15 hp , motor cooling fan (plastic) 20 hp , motor cooling fan (plastic) 25 hp , motor cooling fan (plastic) 30 hp , motor cooling fan (plastic) 40 hp , motor cooling fan (plastic) 5 hp , motor cooling fan (plastic) 50 hp , motor cooling fan (plastic) 7.5 hp , moving coil type amp meter 0-10a for dc supply 4x4 , moving contact for ocb met make 200 amp , pendent holder 5 amp , pin type lugx 20 mmcable , pin type lugx 50 mm cable , pin-3 plug top 15 amp , pin-3 plug top 5 amp , pressure switch for negative pressure (dentos) make up to 5 kg. nov adjusting type , pt bulb 100 watt , push button element 1 no , push button station , pvc aluminum wire 2 core, 1 mmpolycab / grandley / vidhut , pvc copper u/s237/ 76 flexible wire 2 core polycab / grandley / vidhut , pvc copper w/shop40/ 76 flexible wire 2 core polycab / grandley / vidhut , pvc copper wire (national/bidut/havells make) 1.00 mm 2 core 1 , pvc copper wire (national/bidut/havells make) 1.50 mm 2 core 1 , pvc copper wire (national/bidut/havells make) 2.0 mm 2 core 1 , pvc copper wire (national/bidut/havells make) 2.50 mm 2 core 1 , pvc flexble cable 6 core copper wire 140/33 , pvc tapesteel gripb / anchor make 3/4 , sliping for 10 hp ngfe motor , sliping for 125 hp kec motor , sliping for 150 hp kec motor , sliping for 180 hp kec motor , sliping for 250 hp kec motor , sliping for 350 hp kec motor , sliping for jyoti make power turbine alternater 1.5 mw , slipring block assembly for 250 hp kirlosker motor , slipring holder 125 hp motor , slipring holder 150 hp motor , slipring holder 180 hp motor , slipring holder 250 hp motor , slipring holder 350 hp motor , slipring induction motor startor with resistanc box for slipring motor 150hp-50 hz p complete ocb , slipring induction motor startor with resistenc box 150 hpx960 rpm mei/crompton make , slipring motor starter resistance box 400amp 250 hp , socket 2 pin anchor , socket 5 pin anchor , step down transformer with enclose input 240 v out put 24 volt , sunmica sheet any size , taflon rod 2x12 , tape for techo meter reading , u type air heater 100 watt 230 volt , u type air heater 2000 watt 230 volt 990mm length , volt meter squire type 4(0-500 v) , volt meter squire type 6(0.500 v) , voltmeter0 to 500 4x4 round , voltmeter0 to 500 6x6 round , white plastic modular pvc multi-socket electric switch board

Statutory Bodies and Commissions/Committees

TRN :49064464 | 29 May, 2025

Tender Value : 0

Ganganagar - Rajasthan

Tender for bids are invited for amlodipine 10 mg tab , carvedilol 10 mg , diltiazem cd 120 cap or tab , doxophyllin 400 mg tab , eye oint hypermellose 2 percent hydroxypropyl methyl cellulose 2 percent , gatifloxacin 0 point 3percent plus prednisolone 1 percent 5 ml eye drops , methotrexate 10 mg tab , methotrexate 15 mg tab , micro tips 5 to 50 ul pkt of 1000 , minoxidil 5 percent w by v lotion 60 ml , mirtazapine 15 mg tab , moxifloxacin 0 point 5 percent bott of 5 ml eye drops , nifedipine xl 30 mg tab , nortriptyline 10 mg tab , olanzapine 5 mg tab , olmesartan 20 mg tab , pramipexole 0 point 5 mg tab , tolterodine 4 mg tab , trimetazidine 60 sr tab , amylase kit erba , sodium citrate 500 ml , abdominal swab 40 x 25 cm with tape 30 cm , amitriptylline 50 mg tab , benzoyl peroxide 5 percent w by w gel tube of 30 gm , budesonide 200 mcg rotacap dry powder , coal tar 4 point 25 percent plus salicyclic acid 2 percent lotion bott of 60 ml , enteral feed powder high protein 85 percent for renal patients sachet of 126 gm , gluco strip one touch ultra bottle of 50 strips , inh beclomethasone 200 mcg 200 metered dose inh , inh budesonide 200 mcg , inj lignocaine hcl 2 percent without adrenaline 30 ml inj suitable for ophthalmic use also , isosorbide dinitrate 5 mg tab , ketostick bott 100 strip , ranolazine 500 mg tab , sertraline 25 mg tab , sterile disposable plastic towel or trolley cover size 66 cm x 120 cm , urostomy bag 60 mm 11856 with base plate , urostomy bag with flange size 60 to 65 mm , urostomy base plate 60 mm , corn cap containing minimum salicylic acid 30 percent , syp levoclopersatine 10 ml , ubidecarenone 180 mg co enzyme q10 tab , salmeterol 50 mcg plus fluticasone propionate 250 mcg seretide accuhaler total quantity : 10688

Central Government/Public Sector

TRN :49065976 | 15 May, 2025

Tender Value : 0

Pardi - Gujarat

Tender for auction sale of 98050114 scrap p-way fittings miscellanous, released corroded/damaged perforated m.s. bridge plates, metal rail sleepers, gauge tie plates, slide chairs (60 kg, 52 kg), m.s. bearing plates, fish plates (52 kg, 01 mtr), joggle fish plates (60 kg, without holes), curved switch fittings (01 in 12, 60 kg), slide chair plates, special bearing plates, rail cut pieces (small size), slide chair/diamond/slip, mechanical jacks, rail tongues, beater steel, point clamps, spanners (s/e), files, rammer ci, c-clamps, bar clawed, crowbars, c-clamp channels, and miscellaneous scrap, beyond economical repair (ber), sold on as is where is basis, u/s for railway use, loading by purchaser, custodian: dms/scrap/pardi.

Related Searched Keywords : ci plate

List of ci-plate Tenders

Get ci plate Tender Alert...

Related Searched Keywords : ci plate

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us