Filters

List of di-cover Tenders

List of latest di-cover Tenders in Indian Tenders. Click on any di-cover Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for di-cover Tenders.

All-Tenders (678)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :49055736 | 19 May, 2025

Tender Value : 2.43 Crore

Jashpur - Chhattisgarh

Tender for may 200 ton godown, chabutara construction (covered) no. 05, gherao (boundary wall), approach road, toilet and farmers facility center construction, paddy uparjan center gala, patthalgaon, kilkila, vikaskhand - patthalgaon, district - jashpur (ch0g0) (2nd call)

State Government

TRN :49055818 | 21 May, 2025

Tender Value : 7.81 Lacs

24 Paraganas South - West Bengal

Tender for settler with abr at ramchandrapur near rabin mudi shop- 1 earth work excavation of foundation trenchs or drain in all sorts of soil including mix soil excluding laterite or sand stone includinga) depth of excavation not exceeding 1,500 mm 2 (b) depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring. 3 (a) filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) 4 single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. 5 ordinary cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant is codes. (i) pakur variety 6 ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant is codes.(i) pakur variety 7 ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant is codes.(i) pakur variety 8 reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) for works in foundation and upto roof of ground floor/upto 4 m (i) tor steel/mild steel i. sail/tata/rinl 9 hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) 10 brick work with 1st class bricks in cement mortert(1:4) a)in foundation and plinthb) in super structure, in all floor. 11 plastering at wall with sand and cement morterincluding rounding off or chamfaring corner (1:6) 20 mm th. 12 net cement punning about 1.5 mm thick in wall dado window floor drain etc. 13 supply of upvc pipes (b type) & fittings conforming to is-13592-1992.(a) (i) single socketed 3 meter length (b) 110 mm inlet/outlet of hpgf 14 labour for fitting and fixing u.p.v.c. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or r.c. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the engineer in-charge. (payment will be made on centre line measurement of the total pipeline including specials.(a) above ground (ii) 110 mm dia. 15 supply of upvc pipes (b type) & fittings conforming to is-13592-1992.(b) fittings (ii) plain tee (b) 110 mm 16 supplying, fitting and fixing in position c.i. manhole/ pit cover with rim. (b) square- 600 mm x 600 mm x 50 kg (approx.) 17 supply of upvc pipes (b type) & fittings conforming to is-13592-1992. providing & supplying cowl 18 c.i. sluice valve with flanged ends drilled to as per i.s. 1358/62 and having all cast iron components as per i.s. 780/71 solid forged bronze inside screw spindle having ultimate tensile strength not less than 4.72 mt per sq. cm. spindle nut valve and seat faces of hard wear resisting, manufactured from best quality gunmetal conforming to i.s. 780/71, painted black all over with asphalt base paint tested to 21 kg (hydraulic pressure) per sq. cm., valve opening to anticlockwise direction, fitted and fixed complete. 19 providing and laying of filter media with granularmaterials/stone crushed aggregates/brickaggregates /river bed materials satisfying therequirements laid down in clause 2504.2.2 of mort&h 20 earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (payment to be made on the basis of measurement of finished quantity of work)(a) with earth obtained from excavation of foundation 21 surfacedressingof the ground inany kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed. 22 18% cgst & sgst 23 1 % labour cess

State Government

TRN :49055823 | 21 May, 2025

Tender Value : 4.49 Lacs

24 Paraganas South - West Bengal

Tender for settler with abr at uttar ramchandrapur near gul company- 1 earth work excavation of foundation trenchs or drain in all sorts of soil including mix soil excluding laterite or sand stone includinga) depth of excavation not exceeding 1,500 mm 2 (b) depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring. 3 (a) filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) 4 single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. 5 ordinary cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant is codes. (i) pakur variety 6 ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant is codes.(i) pakur variety 7 ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant is codes.(i) pakur variety 8 reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) for works in foundation and upto roof of ground floor/upto 4 m (i) tor steel/mild steel i. sail/tata/rinl 9 hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) 10 brick work with 1st class bricks in cement mortert(1:4) a)in foundation and plinthb) in super structure, in all floor. 11 plastering at wall with sand and cement morterincluding rounding off or chamfaring corner (1:6) 20 mm th. 12 net cement punning about 1.5 mm thick in wall dado window floor drain etc. 13 supply of upvc pipes (b type) & fittings conforming to is-13592-1992.(a) (i) single socketed 3 meter length (b) 110 mm inlet/outlet of hpgf 14 labour for fitting and fixing u.p.v.c. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or r.c. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the engineer in-charge. (payment will be made on centre line measurement of the total pipeline including specials.(a) above ground (ii) 110 mm dia. 15 supply of upvc pipes (b type) & fittings conforming to is-13592-1992.(b) fittings (ii) plain tee (b) 110 mm 16 supplying, fitting and fixing in position c.i. manhole/ pit cover with rim. (b) square- 600 mm x 600 mm x 50 kg (approx.) 17 supply of upvc pipes (b type) & fittings conforming to is-13592-1992. providing & supplying cowl 18 c.i. sluice valve with flanged ends drilled to as per i.s. 1358/62 and having all cast iron components as per i.s. 780/71 solid forged bronze inside screw spindle having ultimate tensile strength not less than 4.72 mt per sq. cm. spindle nut valve and seat faces of hard wear resisting, manufactured from best quality gunmetal conforming to i.s. 780/71, painted black all over with asphalt base paint tested to 21 kg (hydraulic pressure) per sq. cm., valve opening to anticlockwise direction, fitted and fixed complete. 19 providing and laying of filter media with granularmaterials/stone crushed aggregates/brickaggregates /river bed materials satisfying therequirements laid down in clause 2504.2.2 of mort&h 20 earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (payment to be made on the basis of measurement of finished quantity of work)(a) with earth obtained from excavation of foundation 21 surfacedressingof the ground inany kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed. 22 18% cgst & sgst 23 1 % labour cess

State Government

TRN :49055947 | 28 May, 2025

Tender Value : 2.70 Crore

Bilaspur - Chhattisgarh

Tender for construction of pressurized pipe system to supply water for solar micro irrigation to deliver at farmers field up to 1 ha with a duty of 0.84 lit/sec/ha and maintained up to 4 ha chak, keeping the discharge of minimum 3 times the duty at one hectare and at least 20 meter residual head at 1 ha for micro pressurized irrigation (drip/sprinkler) by rotation in distt. bilaspur in 44 ha. in kharif and 44 ha. in rabi (right side of barar anicut as indicated in index map), out of total gross command area 100 hectare fully covering the entire compact, contiguous possible arable area beyond 500m from submergence line (ftl line) of barar anicut as indicated in the index map for micro irrigation system without exceeding total power requirement for solar pumps with solar panel of 250 kw. it includes all activities starting from survey, investigation, designing, estimating costing, procurement, construction, laying, installing, energizing, etc. of pumping system, rising and gravity mains, main line, branch lines, distribution network, controlling and regulation system etc. for supply of filtered water for irrigation under pressure. the work also includes formation of fpo as per company act/rule, management, operation and maintenance (mom) and defect liability (dl) for the period of 05 years after completion and mom and dl period run simultaneously and work also including foundation stone laying ceremony and inauguration ceremony and as directed by engineer-in-charge as per details given in scope of work. mou between agency and fpo to operate scheme after 05 years of mom and dl period and to arrange linkage facility to the fpo.

State Government

TRN :49056027 | 27 May, 2025

Tender Value : 0

Goalpara - Assam

Tender for tender for supply of stationery articles arzulaid paper 43x69 cm(b.q) dfc paper 43 x69 cm(b.q) duplicating paper(b.q) ____xerox papera-4_ __xerox papera-3_ __ xeox paper f-s carbon(korex) blue compute ribbon dot matrix computer printer dot matrix vim bar (big) vim powder 500 gm cloth binding register 300 pages including paper (30 x40) cm _ guard file_ lock and key 50 mm (godrej) lock and key 100mm (godrej) envelope(big)__ envelope (small) staple machine(24 x6) 10 nos steno note book door mat 3 x6 ft broom stick (phuuharu) ceiling brush(long) file cover 4 folder _ harpic 500 ml basket(wasted paper) plastic bucket (big) plastic bucket (medium) plastic mug(big) 1kg jug plastic ( 2lt) cup plate (bone china) cup plate (vip) tumber glass(plain) 2 teaspoon(steel) cushion (kurlon) door mat 3 x2 ft file cover and board per doz 49 duplicating ink cloth binding register 300 pages including paper (30 x40) cm do 250 pages do per piece 59 do 200 pages do binding register 10 nos attendance register form binding 500 pages filter candle (milton) single table knife (medium) white tape peon book filter (steel) 18 litres filter milton 18 litres nepthalin ball pencil battery (wall clock) stamp pad (kores) big stamp pad (kores) medium pad ink(best quality) _ urinal brush calculator 12 digits looking glass(for urinal) filter candle(best quality) towel big (best quality) towel bombay dyeing cotton tag (long) ball pen(cello gripper) table glass 5 mm tap dispenser (medium) type ribon(black) water tape plastic (best quality) water tap (steel) leather bag binding register 10 nos plain and 60 per piece role coconutjharu_ computer ribon set (for dot ___ matrix national flag(big) register 250 pages register 200 pages register 300 pages xerox toner (richo) xerox toner (cannon) balck hit (mosquto killer) mosquito killer machine computer eye protector pen drive bleaching powder clip board plastic guard file (clip fitted) staple wire (24 x6) table tray (plastic) paper weight soap handwash haxobin powder bucket (galvanished big) staple wire(14 x6) coat hanger wall clock (battery system) water pipe (b.q) punching machine ink (camlin) bottle pencil battery (a/c remote control) sketch pencil room freshner _ gel refil_ refill(cel gripper) _ refil(red)_ computer hp cartridge 88a refil (doctor) red/blue small ink (celpark) 60ml gum liquid 700 ml __gum 30 mltube_ correcting fluid 15 ml candle stick 6 inch pen stand big(glass) pen stand medium (glass) ball pen both side (b.q plastic) ball pen(best quality) steel _ add gel pen alppin(kores) 100 gm thread ball 100 gm jutesutli_ _phynil 500 ml_____ phynil(scented)500 ml

State Government

TRN :49056212 | 19 May, 2025

Tender Value : 3.00 Lacs

Malda - West Bengal

Tender for construction of cc covered drain with leach pit or filter chamber from dipak ghosh house towards soumitra ghosh house at bandhapukur under jadupur i gp english bazar dev block malda xvfc tied -

Local Bodies

TRN :49056288 | 14 May, 2025

Tender Value : 0

Agra - Uttar Pradesh

Tender for tender for repair painting and maintenance work of agra development authority premises and all office rooms - 12mm thick cement plaster in single coat on fair side of single or half brick wall for interior plastering upto floor two level including internal rounded angles not exceeding 80mm in girth, chamfers and finished even and smooth. (item no. 13.4.1 dsr-2023) 1 cement : 4 coarse sand 2 removing white or colour wash by scrapping and sand papering and preparing the surfacesmooth including necessary repairs to scratches etc. complete(item no. 13.88 dsr-2023) 3 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (item no. 13.80 dsr 2023) 4 finishing walls with acrylic smooth exterior paint of required shade : old work (two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface (item no. 13.111.1 dsr 2023) 5 painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 13.61.1 two or more coats on new work (item no. 13.61.1 dsr 2023) 6 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete (item no. 5.22.1, dsr-2023) 7 rcc work providing and laying in position specified grade of reinforced cement concrete,slab including the cost of centering, shutterang, finishing and excluding reinforcement - above plinth level upto fifth floor lable : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone (item no. 5.1.2 dsr 2023) 8 reinforced cement concrete work in walls (any thickness), including attachedpilasters, buttresses, plinth and string courses, fillets, columns, pillars, plers, abutments, posts and struts etc, including cost of centering, shuttering, finishing and excluding reinforced :- 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). (item no. 5.2.2 dsr 2023)i) upto plinth level 9 engagement of plumber with kit. 10 engagement of plumber helper. 11 engaging of beldar for malva disposal. (item no. 0114 dsr 2023) 12 engagement of carpenter. (item no. 0111 dsr 2023) 13 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding grouting the joints with white cement and matching pigments etc., complete. size of tile 600x600 mm (item no. 11.41.2 dsr 2023) 14 providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to is : 15622 of approved make in colours such as white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. (item no. 11.37 dsr 2023) 15 providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete as per rchitectural drawings and the directions of engineer-in-charge. (glazing, paneling and dash fasteners to be paid for separately)(item no. 21.1.2.2 dsr 2023) powder coated aluminium (minimum thickness of powder coating 50 micron) 16 providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per (cost of aluminium snap beading shall be paid in basic item):(item no. 21.3.2 dsr 2023)with float glass panes of 5 mm thickness 17 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. :(item no. 18.7 dsr 2023) 15 mm nominal outer dia pipes (item no. 18.7.1 dsr 2023) 18 20 mm nominal outer dia pipes (item no. 18.7.2 dsr 2023) 19 25 mm nominal outer dia pipes (item no. 18.7.3 dsr 2023) 20 providing and fixing pvc pipe conforming to is make working pressure 6 kg/sqcm incuding testing labour t&p and all complete fittings (ch-23 s.i. no. 30 sor 2023-24) 21 110 mm diameter 22 140 mm diameter 23 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:4 (1 cement : 4 coarse sand) (item no. 6.1.1 dsr 2023) 24 class-150 (non modular) brick work in 1:4 cement and coarse sand mortar in super structure above plinth level upto floor five level including necessary cutting and moulding of brick work as required and also including honey combed brick work in thickness of wall more than 12cm. (item no. 6.4 dsr 2023) 25 steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as requiredin gratings, frames, guard bar, ladder, railings, brackets, gates and similar works (item no. 10.25.2 dsr 2023) 26 providing and fixing stainless steel ( grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). (item no. 10.28 dsr 2023) 27 providing and laying flamed finish granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer-in-charge :flamed finish granite stone slab jet black, cherry red, elite brown, cat eye or equivalent.(item no. 11.55.1 dsr 2023) 28 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone. red sand stone (item no. 11.29.1 dsr 2023) 29 providing and fixing c.p. brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 gms. 15 mm nominal bore (item no. 18.51.1 dsr 2023) 30 providing and fixing c.p. brass angle valve for basin mixer and geyser points of approvedquality conforming to is:8931 (15mm nominal bore). (item no. 18.53.1 dsr 2023) 31 providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white pvc automatic flushing cistern, with fittings, standard size c.p. brass flush pipe, spreaders with unions and clamps (all in c.p. brass) with waste fitting as per is : 2556, c.i. trap with outlet grating and other couplings in c.p. brass, including painting of fittings and cutting and making good the walls and floors wherever required: (item no. 17.5.1 dsr 2023) single half stall urinal with 5 litre pvc. automatic flushing cistern 32 providing and fixing white vitreous china pedestal type water closet (european type w.c. pan) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: w.c. pan with isi marked white solid plastic seat and lid (item no. 17.2.1 dsr 2023) 33 providing and fixing uplasticised pvc connection pipe with brass unions:(item no. 18.21.2.2 dsr 2023) 45 cm length - 20 mm nominal bore 34 providing and fixing p.v.c. waste pipe for sink or wash basin including pvc waste fittings complete.(item no. 17.28.2.2 dsr 2023) flexible pipe - 40 mm dia 35 providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. (35 mm thick including isi marked stainless steel butt hinges with necessary screws) (item no. 9.20.1 dsr 2023) 36 providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blown or / and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade ii (glass fibre base self finished bitumen felt) and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per sqm including preparation of surface but excluding grading, complete (item no. 22.11 dsr 2023) 37 providing and laying cement concrete in 1:4:8 (1 cement : 4 course sand : 8 graded stone aggregate 40 mm nominal size) and curing complete, including cost of form work in foundation and floors.(item no. 4.1.8 dsr-2023) 38 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) (item no. 4.1.3 dsr 2023) 39 providing corrugated g.s. sheet roofing including vertical / curved surface fixed with polymer coated j or l hooks, bolts and nuts 8 mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (item no. 12.1.3. dsr 2023) 0.63 mm thick with zinc coating not less than 275 gm/ m² 40 engaging of blacksmith 1st class (item no. 0102 dsr-2023) 41 providing and placing on terrace (at all floor levels) polyethylene water storage tank, is : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (item no. 18.48 dsr-2023) 42 supplyof stone screening 11.2mm nominal size. (ch-1 item no. 3(d)h sor 2023-24) 43 supply of coarse sand.(ch-1 item no. 6 sor 2023-24)

State Government

TRN :49056524 | 16 May, 2025

Tender Value : 1.41 Lacs

Jhargram - West Bengal

Tender for tender for hiring of diesel driven commercial covered four wheeler vehicle on daily basis along with lmv licensed driver for official purpose of assistant engineer, jhargram mechanical division, phe dte.

State Government

TRN :49056564 | 21 May, 2025

Tender Value : 7.81 Lacs

24 Paraganas South - West Bengal

Tender for settler with abr at dakshin ramchandrapur near tarun sangha shiv mandir- 1 earth work excavation of foundation trenchs or drain in all sorts of soil including mix soil excluding laterite or sand stone includinga) depth of excavation not exceeding 1,500 mm 2 (b) depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring. 3 (a) filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) 4 single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. 5 ordinary cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant is codes. (i) pakur variety 6 ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant is codes.(i) pakur variety 7 ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant is codes.(i) pakur variety 8 reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) for works in foundation and upto roof of ground floor/upto 4 m (i) tor steel/mild steel i. sail/tata/rinl 9 hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) 10 brick work with 1st class bricks in cement mortert(1:4) a)in foundation and plinthb) in super structure, in all floor. 11 plastering at wall with sand and cement morterincluding rounding off or chamfaring corner (1:6) 20 mm th. 12 net cement punning about 1.5 mm thick in wall dado window floor drain etc. 13 supply of upvc pipes (b type) & fittings conforming to is-13592-1992.(a) (i) single socketed 3 meter length (b) 110 mm inlet/outlet of hpgf 14 labour for fitting and fixing u.p.v.c. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or r.c. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the engineer in-charge. (payment will be made on centre line measurement of the total pipeline including specials.(a) above ground (ii) 110 mm dia. 15 supply of upvc pipes (b type) & fittings conforming to is-13592-1992.(b) fittings (ii) plain tee (b) 110 mm 16 supplying, fitting and fixing in position c.i. manhole/ pit cover with rim. (b) square- 600 mm x 600 mm x 50 kg (approx.) 17 supply of upvc pipes (b type) & fittings conforming to is-13592-1992. providing & supplying cowl 18 c.i. sluice valve with flanged ends drilled to as per i.s. 1358/62 and having all cast iron components as per i.s. 780/71 solid forged bronze inside screw spindle having ultimate tensile strength not less than 4.72 mt per sq. cm. spindle nut valve and seat faces of hard wear resisting, manufactured from best quality gunmetal conforming to i.s. 780/71, painted black all over with asphalt base paint tested to 21 kg (hydraulic pressure) per sq. cm., valve opening to anticlockwise direction, fitted and fixed complete. 19 providing and laying of filter media with granularmaterials/stone crushed aggregates/brickaggregates /river bed materials satisfying therequirements laid down in clause 2504.2.2 of mort&h 20 earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (payment to be made on the basis of measurement of finished quantity of work)(a) with earth obtained from excavation of foundation 21 surfacedressingof the ground inany kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed. 22 18% cgst & sgst 23 1 % labour cess

Government Departments

TRN :49056686 | 23 May, 2025

Tender Value : 0

West Tripura - Tripura

Tender for expression of interest for empanelment as a registered vendor under the tripura small industries corporation limited for organizing different types of short term skill development training programmes in any part of tripura as follows: 1) food processing, 2) custom jewelry making, 3) file cover with board, envelope, paper bag making, 4) tailoring / dress making, 5) decorative candle making, 6) make up beauty parlour, 7) mobile repairing, 8) pc hardworking & networking. 9) soft toy making, 10) making of biodegradable non-woven bags etc

Related Searched Keywords : di cover

List of di-cover Tenders

Tender for may 200 ton godown, chabutara construction (covered) no. 05, gherao (boundary wall), approach road, toilet and farmers facility center construction, paddy uparjan center gala, patthalgaon, kilkila, vikaskhand - patthalgaon, district - jashpur (ch0g0) (2nd call)

Tender for construction of cc covered drain with leach pit or filter chamber from dipak ghosh house towards soumitra ghosh house at bandhapukur under jadupur i gp english bazar dev block malda xvfc tied -

Tender for tender for hiring of diesel driven commercial covered four wheeler vehicle on daily basis along with lmv licensed driver for official purpose of assistant engineer, jhargram mechanical division, phe dte.

Get di cover Tender Alert...

Related Searched Keywords : di cover

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us