Filters

List of drilling-material Tenders

List of latest drilling-material Tenders in Indian Tenders. Click on any drilling-material Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for drilling-material Tenders.

All-Tenders (8)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

corporations/Associations/Others

TRN :34441871 | 05 May, 2025

Tender Value : 0

Bellary - Karnataka

Tender for gem bids forcustom bid for services - collection of samples at various places of ad3 extended to c4 to c10a waste dump material at diom hilltop for assessing the incidence of iron content through drilling boreholes using a suitable exploration drilling machin..

Central Government/Public Sector

TRN :34434244 | 09 May, 2025

Tender Value : 0

Rajahmundri - Andhra Pradesh

Tender for expression of interest for integrated drilling project management services including well design , drilling rig , associated services of drilling , equipment , material procurement and personnel for drilling 03 nos.

Central Government/Public Sector

TRN :34404893 | 12 May, 2025

Tender Value : 0

Jamshedpur - Jharkhand

Tender for gem bids for clearing jungle including uprooting of rank vegetation grass brush wood trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. "supplying chemical emulsion in sealed containers including delivery as specified. chlorpyriphos or lindane emulsifiable concentrate of 20 percent" "diluting and injecting chemical emulsion for post constructional anti termite treatment excluding the cost of chemical emulsion along external wall where the apron is not provided using chemical emulsion at the rate 7.5 litres or sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall and rodding etc. complete isto with chlorpyriphos or lindane e.c. 20 percent with 1 percent concentration" "earth work in excavation by mechanical means hydraulic excavator or manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m all kinds of soil." filling available excavated earth excluding rock in trenches plinth sides of foundations etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering lead up to 50 m and lift upto 1.5 m supplying and filling in plinth with sand under floors including watering ramming consolidating and dressing complete. "providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level 1 isto 3 isto 6 1 cement 3 coarse sand zone iii 6 graded stone aggregate 20 mm nominal size " "providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering shuttering finishing and reinforcement all work up to plinth level isto 1 isto 1.5 isto 3 1 cement 1.5 coarse sand zone iii 3 graded stone aggregate 20 mm nominal size " "reinforced cement concrete work in walls any thickness including attached pilasters buttresses plinth roof and string courses fillets columns pillars piers abutments posts and struts etc. above plinth level up to floor five level excluding cost of centering shuttering finishing and reinforcement 1 isto 1.5 isto 3 1 cement 1.5 coarse sand zone iii 3 graded stone aggregate 20 mm nominal size " brick work with common burnt clay f.p.s. non modular bricks of class designation 7.5 in foundation and plinth in cement mortar 1 isto 6 1 cement 6 coarse sand brick work with common burnt clay f.p.s. non modular bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in cement mortar 1 isto 6 1 cement 6 coarse sand "half brick masonry with common burnt clay f .p .s. non modular bricks of class designation 7.5 in superstructure above plinth level up to floor v level. cement mortar 1 isto 4 1 cement 4 coarse sand " "centering and shuttering including strutting propping etc. and removal of form for foundations footings bases of columns etc. for mass concrete" "centering and shuttering including strutting propping etc. and removal of form for suspended floors roofs landings lintals beams balconies and access platform" "steel reinforcement for r.c.c. work including straightening cutting bending placing in position and binding all complete upto plinth level thermo mechanically treated bars of grade fe 500d or more make sail or tata or jindal " "15 mm cement plaster on the rough side of single or half brick wall of mix isto 1 isto 6 1 cement isto 6 fine sand rates for external plastic are for height upto 10m from ground level in less otherwise stated cement make nuvoco lafarge or ultratech or acc or as per direction of eic " "12 mm cement plaster of mix 1 isto 6 1 cement isto 6 fine sand rates for external plastic are for height upto 10m from ground level in less otherwise stated cement make nuvoco lafarge or ultratech or acc or as per direction of eic " "6 mm cement plaster of mix 1 isto 3 1 cement 3 fine sand rates for external plastic are for height upto 10m from ground level in less otherwise stated cement make nuvoco lafarge or ultratech or acc or as per direction of eic " neat cement punning. "finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade new work two or more coats applied at the rate 1.43 ltr or 10 sqm over and including priming coat of exterior primer applied at the rate 2.20 kg or 10 sqm make dulux or burger or asian paints or as per direction of eic" white washing with lime to give an even shade new work three or more coats mix with fevicol ddl and robin blue or as per direction of eic "painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. preferable make dulux or burger or asian paints or as per direction of eic make dulux or burger or asian paints or as per direction of eic" making plinth protection 50mm thick of cement concrete 1 isto 3 isto 6 1 cement 3 coarse sand zone iii 6 graded stone aggregate 20 mm nominal size over 75mm thick bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation levelling and dressing and finishing the top smooth "providing and fixing angle iron frames for doors windows and ventilators of mild steel angle sections of size 35x35x5 mm joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing t iron frame or to the wall with dash fastener including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer all complete as per the direction of engineer in charge. make sail or tata or jindal " "providing and fixing isi marked flush door shutters conforming to is isto 2202 part i decorative type core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including isi marked stainless steel butt hinges with necessary screws" "structural steel work in single section fixed with or without connecting plate including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete. make sail or tata or jindal " 25 mm thick pvc flush door shutters made out of a one piece multi chamber extruded pvc section of the size of 762 mm into 25 mm or less as per requirement with an average wall thickness of 1 mm plus or minus 0.3 mm . pvc foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. m.s. tube having dimensions 19 mm into 19 mm and 1.0 mm plus or minus 0.1 mm is inserted along the hinge side of the door. core of the door shutter should be filled with high density polyurethane foam. the top and bottom edges of the shutter are covered with an end cap of the size 25 mm into 11 mm. door shutter shall be reinforced with special polymeric reinforcements as per manufacturer specification and direction of engineer in charge to take up necessary hardware and fixtures. stickers indicating the locations of hardware will be pasted at appropriate places "providing and fixing isi marked oxidised m.s. sliding door bolts with nuts and scrows etc. complete .as per the direction of directions of engineer in charge.300x16 mm " "providing and fixing ist quality ceramic glazed wall tiles conforming to is 15622 thickness to be specified by the manufacturer of approved make somany or kajaria or nitco in all colours shades except burgundy bottle green black of any size as approved by engineer in charge in skirting risers of steps and dados over 12 mm thick bed of cement mortar 1 isto 3 1 cement 3 coarse sand and jointing with grey cement slurry at the rate 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. make isto somany or kajaria or nitco or asian or as per direction of eic" "providing and laying vitrified floor tiles in different sizes thickness to be specified by the manufacturer with water absorption less than 0.08percent and conforming to is 15622 of approved make in all colours and shades laid on 20mm thick cement mortar 1 isto 4 1 cement 4 coarse sand jointing with grey cement slurry at the rate 3.3 kg or sqm including grouting the joints with white cement and matching pigments etc. complete. size of tile 600x600 mm make somany or kajaria or nitco or asian or as per direction of eic" "providing and fixing water closet squatting pan indian type w.c.pan with 100 mm sand cast iron p or s trap 10 litre low level white p.v.c. flushing cistern including flush pipe with manually controlled device handle lever conforming to is 7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required white vitreous china orissa pattern w.c. pan of size 580x440 mm with integral type foot rests preferable make hindware or parrywair or hindustan or cera or direction of eic" "providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and c.p. brass spreaders with brass unions and g.i clamps complete including painting of fittings and brackets cutting and making good the walls and floors wherever required one urinal basin with 5 litre white p.v.c. automatic flushing cistern preferable make hindware or parrywair or hindustan or cera or direction of eic" "providing and fixing wash basin with c.i. brackets 15 mm c.p. brass pillar taps 32 mm c.p. brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever require isto white vitreous china wash basin size 630x450 mm with a single 15 mm c.p. brass pillar tap" "providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c. waste fittings complete. semi rigid pipe 32 mm dia" providing and fixing 600x450 mm beveled edge mirror of superior glass of approved quality complete with 6 mm thick hard board ground fixed to wooden cleats with c.p . brass screws and washers complete. "providing and fixing brass bib cock of approved quality 15 mm nominal bore" "providing and fixing brass stop cock of approved quality 15 mm nominal bore" providing and fixing circular or hexagonal cast iron or m.s. sheet box for ceiling fan clamp of internal dia 140 mm 73 mm height top lid of 1.5 mm thick m.s. sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron or m.s. sheet box by means of 3.3 mm dia round headed screws one lock at the corners. clamp shall be made of 12 mm dia m.s. bar bent to shape as per standard drawing. providing and fixing isi marked oxidised m. s handles conforming to is 4992 with necessary screws etc. complete 125 mm providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc. complete. providing and fixing is 12817 marked stainless steel butt hinges heavy weight with stainless steel screws etc. complete 100x60x2.50 mm "providing and fixing g.i. pipes complete with g.i. fittings including trenching and refilling etc. for external work a. 15 mm dia nominal bore preferable make tata or jindal or as per direction of eic" "providing and fixing g.i. pipes complete with g.i. fittings including trenching and refilling etc. for external work b. 20 mm dia nominal bore preferable make tata or jindal or as per direction of eic" providing and fixing g.i. pipes complete with g.i. fittings including trenching and refilling etc. for external work d. 50 mm dia nominal bore preferable make tata or jindal or as per direction of eic "providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is 13592 type a including jointing with seal ring conforming to is 5382 leaving 10 mm gap for thermal expansion single socketed pipes. 110 mm diameter" "providing and fixing gun metal gate valve with c.i. wheel of approved quality screwed end isto 20 mm nominal bore" "providing and fixing gun metal gate valve with c.i. wheel of approved quality screwed end isto 50 mm nominal bore" providing and placing on terrace at all floor levels polyethylene water storage tank is isto 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet outlet and overflow pipes but without fittings and the base support for tank. providing and fixing 100 mm sand cast iron grating for gully trap constructing brick masonry chamber for underground c.i. inspection chamber and bends with bricks in cement mortar 1 isto 4 1 cement 4 coarse sand c.i. cover with frame light duty 455x610 mm internal dimensions total weight of cover with frame to be not less than 38 kg weight of cover 23 kg and weight of frame 15 kg r.c.c. top slab with 1 isto 1.5 isto 3 mix 1 cement 1.5 fine sand isto 3 graded stone aggregate 20 mm nominal size foundation concrete 1 isto 5 isto 10 1 cement 5 fine sand 10 graded stone aggregate 40 mm nominal size inside plastering 12 mm thick with cement mortar 1 isto 3 1 cement isto 3 coarse sand finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets isto with common burnt clay f.p.s. non modular bricks of class designation 7.5 "constructing masonry chamber 30x30x50 cm inside in brick work in cement mortar 1 isto 4 1 cement isto 4 coarse sand for stop cock with c. i. surface box 100x100 x75 mm inside with hinged cover fixed in cement concrete slab 1 isto 2 isto 4 mix 1 cement isto 2 coarse sand isto 4 graded stone aggregate 20 mm nominal size i or c necessary excavation foundation concrete 1 isto 5 isto 10 1 cement isto 5 fine sand isto 10 graded stone aggregate 40mm nominal size and inside plastering with cement mortar 1 isto 3 1 cement isto 3 coarse sand 12mm thick finished with a floating coat of neat cement complete as per standard design isto with common burnt clay f.p.s. non modular bricks of class designation 7.5" providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level isto 1 isto 1.5 isto 3 1 cement isto 1 coarse sand zone iii 3 graded stone aggregate 20 mm nominal size making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and s.w. drain pipe 100 mm diameter 1.8 m long complete as per standard design. with common burnt clay f.p.s. non modular bricks of class designation 7.5 "cement concrete flooring 1 isto 2 isto 4 1 cement isto 2 coarse sand isto 4 graded stone aggregate finished with a floating coat of neat cement including cement slurry but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate" "providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm plus 0.05 percent total coated thickness zinc coating 120 grams per sqm as per is 277 in 240 mpa steel grade 5 to 7 microns epoxy primer on both side of the sheet and polyester top coat 15 to 18 microns using self drilling or self tapping screws complete ridges plain 500 to 600mm " "providing and fixing precoated galvanised iron profile sheets size shape and pitch of corrugation as approved by engineer in charge 0.50 mm plus 0.05 percent total coated thickness with zinc coating 120 grams per sqm as per is 277 in 240 mpa steel grade 5 to 7 microns epoxy primer on both side of the sheet and polyester top coat 15 to 18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineerin charge. the sheet shall be fixed using self drilling or self tapping screws of size 5.5 x 55 mm with epdm seal complete upto any pitch in horizontal or vertical or curved surfaces excluding the cost of purlins rafters and trusses and including cutting to size and shape wherever required." providing and fixing of glass panes with putty and glazing clips in steel doors and windows all complete with 4mm thick glass panes etc. complete. supply of led tube light fittings .make c.g. or philips fixing of led tube light fittings including supply of all hardwares as required. led fitting will be supplied by contractor. make c.g. or philips supply of 48 sweep ceiling fan complete with down rod.clamp canopy etc. fixing of 48 sweep ceiling fan complete with down rod.clamp canopy etc.fan hardwares required for fixing for i.e. nut bolts clamp screws etc wiil be supplied by contractor. supply and fixing of stepped type electronic fan regulator on existing switch board. wiring for light point fan point exhaust fan point with 1.5 sqmm frls pvc insulated copper conductor single core cable in consield with modular switch modular plate suitable gi box and earthing the point with 1.5 sqmm frls pvc insulated copper conductor cable as required. supply of frls pvc insulated copper conducter single core cable of size 6 sqmm. make havells or kei or polycab or national wiring for circuit or submain wiring along with earth wire with the following sizes of frls pvc insulated copper conductor single core cable in consield or recessed medium class pvc conduit in concield as required 2 x 6 sqmm plus 1 x 6 sqmm earth wire. all the three colours should be red blue and green supply and fixing of utility db p or s 20a dp metal plug and socket distribution board grey make anchor or havells supply and installation of three phase industrial box with 32 amp 4 pole mcb and 5 pin top plug. make neptune or reputed make supply of frls pvc insulated copper conducter single core cable of size 10 sqmm. make havells or kei or polycab or national wiring for circuit or submain wiring along with earth wire with the following sizes of frls pvc insulated copper conductor single core cable in surface or recessed medium class pvc conduit in concield as required 4 x 10 sqmm + 1 x 10 sqmm earth wire.all the five colours should be red blue yellow black and green preparation of earth pit with supply of all materials including 3m long 3.64mm thick perforted gi tube with salt and charcol in alternate layer and brick chamber at the top with chequered plate 6mm thick as per is 3043 with latest. supply and laying 25mm x 5 mm gi strip at 0.5 meter below ground or wall including connection with electrode with db. supply of all hardware are in scope of contractor supply ans fixing of surface mounting vertical type 415 volts tpn mcb distribution board of sheet steel dust proctected duly power coated painted inclusive 200 amp tinned copper bus bar common neutral link earth bar din bar for mounting mcb with provision of 100 amp tpn mccb as incomer interconnection between incomer mccb and busbar. supply and fixing of 5 to 32 amp rating 240 or 415 volt mcb suitable as per load. supply and fixing of four pole 100 amp rating 415 volt 16 ka mccb . laying of 1.1kv grade pvc al.cable of size 2 or 3 or 3.5 or 4c 2.5 or 6 or 10 or 16 or 25 or 35 sq.mm in underground trench of 760mm deepx760mm wide in single tier formation including trench excavation and back filling with bricks 15brick or m and sand protection route marker. road or concreete or bolder cutting and finishing the road to its original shape are in the scope of the contractor. supply and fixing of street light on wall including supply of all necessaryu hardware for fixing of fitting on wall. supply and fixing of bulk head fitting on wall including supply of all necessaryu hardware for fixing of fitting on wall. supply installation and commissioning of exhaust fan of size 300 mm dia. this includes cutting of wall and finishing and supply of hardware like nut bolts etc. make crompton

Central Government/Public Sector

TRN :34378478 | 03 May, 2025

Tender Value : 0

Baramulla - Jammu And Kashmir

Tender for gem bids for pre fabricated or 40 men living shelter made up of steel structure and hybrid pir panels in wall , aggregate 20mm. stone aggregate to be crushed rock or gravel 20mm graded , aggregate 40mm stone aggregate to be crushed rock or gravel 40mm graded , manufactured sand m sand confirming to is 383 2016 specifications for coarse and fine aggregates. , bricks common burnt clay building bricks sub class b , white cement make- birla white jk cement acc packet 01 kg , water proof floor silica panels of size 600 x 600 mm with minimum thickness of 10 mm , non skid ceramic tiles coloured 7 to 8 mm thick in floors , prefabricated foundation reinforcement type f 2 made of 12 mm and 10 mm , form work type 2 timber form work material , ms clamp msde of ms flat 40 x 4 mm 200mm long bent in l shape , rapidite quick setting liquid , liquid water proofing compound is 26452003 using instruction specification , pvc ceiling rose 2 obliq 3 terminal with pvc square box complete with screws , led tube light fitting 1 x 18w 4 feet long complete with all accessories , xlpe insulated pvc seathed heavy duty armoured multi core cable 16 sqmm 2 core aluminum conductor , cable pvc insulated unsheathed single core flexible copper conductor 1100v grade of size 1.5 sqmm. , cable pvc insulated unsheathed single core flexible copper conductor 1100v grade , cable pvc insulated and pvc sheathed 1100v grade twin core with stranded aluminium conductor confirming to is 694 1990 of size 4 sq mm. , flexible wire pvc insulated twin core twisted of size 22 0.0076 with copper conductor. , modular switch one way 6 amps one module confirming to is 3854 1966. , ms screw 20 mm per pkt-100 nos confirming to is 723 1972 , ms screw 35 mm per pkt 100 nos confirming to is 723 1973. , insulation tape 2 cm width 10 mtr long isi marked make steel grip. , mcb single pole 230v ac 50 hz 6 amps 10ka , mcb single pole 230v ac 50 hz 16 amps 10ka , mcb distribution boards in sheet metal enclosure 8 ways double door with blanks confirming to is 8623. , residual current circuit breaker with over load and short circuit protection dp 32 amps , modular switch one way 16 amp 1 module , modular socket 6a 2 obliq 3 pin combined 2 module. , modular socket 16a 2 obliq 3 pin combined 2 module. , white cover plate with frame 3 module. , white cover plate with frame 6 module. , metal flush box 3 module , metal flush box 6 module , compact street light luminaire with deep drawn housing complete along with single 36w fr l. , pvc casing caping pipe 25mmx16mm confirming to is 14927 , pvc casing caping l bend 25mm confirming to is 371 1979. , pvc casing caping t 25mm for conduit pipe , pvc casing caping elbow 25mm dia , pvc casing caping square box 4 inch x 4 inch , plastic body exhaust fan 250mm sweep with louvers. , plastic body wall mounting fan 450mm sweep. , two tier sleeping bunks as per drawing attached to be provided by vendor , fire extinguisher of capacity 2 kgs along with its accessories confirming to is 13849. two nos with each shelter , heating device kerosene based heating device of following specifications will be provided with each shelter. , waste bin 120 ltr dim 480 x 550top o.d. , plastic chair with handrest model dynasty dim 570 w x 593d x 890h. colour dark brown make nilkamal or equalent , cup board model freedom fmdr 1b dim 595 w x 354d x 1450 h dark brown make nilkamal or equalent , looking mirror 1200x750x3.5mm thick with plastic decorative frame. make modiguard saint gobin atul glass , drilling machine portable type electrically driven , aluminum straight edge 50mm square 2mm thick 1800mm long , wooden flat gurmala , water levelling pipe pvc 100 mtr , hand rivet gun machine , tile cutter machine with 6 spare blades each , tasla iron 18 inch , shovel with wooden handle , brick hammer 1.2kgs , cutting plier insulate 6 inch , screw driver 12 inch with insulated plastic handle , adjustable spanner 12 inch , hacksaw frame with 2 blade , hand gloves insulated with 2 rubber , drill bit 6mm dia , drill bit 8mm dia , drill bit 10mm dia , tape measuring metallic 30m , mason trowel karchi , axepicks with wooden handle , fawda with wooden handle , crowbar 5 feet long , rammer with wooden handle of wt 5 kg , pipe wrench 12 inch , pipe wrench 18 inch , aluminum spirit level 6 inch , brick line , neon tester , sleve for sieving fine and corse agg 900x150mm made of angle iron frame with stand , spanner rings 13x17mm , spanner rings 10x11mm , spanner rings 14x15mm , spanner rings 19x22mm , spanner rings 24x26mm , spanner ojde 19x22 , plumbbob 250 gms , lightning conductor will be provided as under and stores are as per appx e and drg at appx f

Central Government/Public Sector

TRN :34378682 | 05 May, 2025

Tender Value : 0

Baramulla - Jammu And Kashmir

Tender for gem bids for pre fabricated store shelter made up of steel structure of size 18.30m x 6.10m x 3.00m clear height up to ceiling level with partition walls , fire extinguisher of capacity 6 kgs along with its accessories confirming to is 13849 two nos with each shelter , lightning conductor will be provided as under and stores are as per appx f , manufactured sand m sand conforming to is 383 1970 specifications for coarse and fine aggregates. , aggregate 20mm. stone aggregate to be crushed rock or gravel 20mm graded , aggregate 40mm. stone aggregate to be crushed rock or gravel 40mm graded , bricks common burnt clay building bricks sub class b modular , glass dividing strips 40x4mm , prefabricated foundation reinforcement type f 2 made of 12 mm and 10 mm , form work type 2 timber form work material for columns of size 0.3 x 0.3 x 0.9m , ms clamp made of ms flat 40 x 4 mm 200mm long bent in l shape with two holes , pvc ceiling rose 2 obliq 3 terminal. , led tube light fitting complete 4 feet long 18 watt tube rod and electronic ballast , xlpe insulated pvc seathed heavy duty armoured multi core cable 16 sqmm 2 core aluminum conductor , cable pvc insulated and pvc seathed 1.5 sqmm single core with copper conductor suitable upto 1100 v conforming to is 694 1990 , modular switch one way 6 amps one module conforming to is 3854 1966. , ms screw 20 mm full threaded per pkt 100 nos conforming to is 723 1972 , ms screw 25 mm full threaded per pkt 100 nos conforming to is 723 1972 , tape insulation 2 cm width 10.00mtr long isi marked , mcb single pole 230v ac 50 hz 6 amps 10ka conforming to is 8828 1996 iec 60898 2002 suitable for lighting and other domestic loads. , mcb distribution boards in sheet metal enclosure 4 ways single door with blanks conforming to is 8623, , residual current circuit breaker with overload and short circuit protection double pole 32 amps , modular socket 6a 2 obliq 3 pin combined 2 module , white cover plate with frame 2 module , white cover plate with frame 4 module , metal flush box 2 module , metal flush box 4 module , pvc casing caping pipe 25mm x16mm conforming to is 14927 part ii , pvc casing caping l bend 25mm conforming to is 371 1979 , pvc casing caping elbow 25mm dia conforming to is 9537 part iii 1983 , pvc casing caping t 25mm for conduit pipe , pvc casing caping square box 4 inch x 4 inch , drilling machine bosch gbh 2 26 re sds plus 2 mode rotary hammer drill 800 watts 26mm electrically driven. make bosch. , sieve for sieving fine and coarse agg 900 x 1500mm made of angle iron frame with stand. , aluminum straight edge 50mm square 2mm thick 1800 mm long , wooden flat gurmala , water levelling pipe pvc 100 mtr , hand rivet gun machine , tasla iron 18 , shovel with wooden handle , brick hammer 1.2kgs , cutting plier insulate 6 , screw driver 12 inch with insulated plastic handle , hacksaw frame with 2 blade , drill bit 6mm dia , drill bit 8mm dia , drill bit 10mm dia , hand gloves insulated with rubber , tape measuring metallic 30m , mason trowel karchi , axes picks with wooden handle , fawda with wooden handle , crowbar 5 feet long , rammer with wooden handle of wt 5 10 kg , pipe wrench 12 inch , pipe wrench 18 inch , aluminum spirit level 6 inch , brick line , spanner adjustable 12 inch

State Government

TRN :34362818 | 30 Apr, 2025

Tender Value : 12.59 Lacs

Vadodara - Gujarat

Tender for drilling 200 mm dia up to 60 mtrs deep tube well by dr drilling rig with supply of various type of required bore materials in district vadodara under different programme

Central Government/Public Sector

TRN :34353253 | 30 Apr, 2025

Tender Value : 0

Baramulla - Jammu And Kashmir

Tender for gem bids for pre fabricated steel tubular bc 3 obliq 1 structure of size 3.60mtr x 2.40mtr , quick setting compound rapidite , aggregate 20mm stone aggregate to be crushed rock or gravel 20mm graded , aggregate 40mm. stone aggregate to be crushed rock or gravel 40mm graded , manufactured sand m sand confirming to is 383 2016 specifications for coarse and fine aggregates , bricks cement pcc brick of size 230mm x 115mm x 75m with sharp corners free from organic materials , water proof coloured silica panels tiles of size 300 x 300mm x 7 to 8mm thick , liquid water proofing compound is 2645 2003 using instructions specification for integral waterproofing compounds , white cement , pvc ceiling rose 2 obliq 3 terminal with pvc square box complete with screws , led tube light fitting 1 x 12 w 2 feet long complete with all accessories including led tube rod , pvc cable insulated and pvc sheathed 1.50 sq mm twin core with copper conductor suitable up to 1100v , flexible wire pvc insulated twin core twisted of size 23 obliq 0.0076 with copper conductor , modular switch one way 6 amp 1 module , white cover plate with frame 2 module , white cover plate with frame 3 module , metal flush box 2 module , metal flush box 3 module , mcb double pole 230v ac 50 hz 16 amps 10ka , mcb distribution board in sheet metal enclosure two ways with blanks conforming to is 8828 1978, , ms screw 20 mm full threaded per pkt 100 nos conforming to is 723 1972 , tape insulation 2 cm width 10 mtr long isi marked , pvc casing caping 25 mm x 16mm , pvc casing caping square box 4 inch x 4 inch , pvc body exhaust fan 250mm sweep with lowers , 110mm dia upvc swr pipe single socketed pipe type a in any length with rubber joint complete , 4 inch dia 110mm dia upvc bend , 20mm dia 3 layer pp r polypropylene random copolymer concealed pipes sdr 7.4 pn16 uv , 20mm elbow suitable for 20mm dia pp r pipe confirming to is 1239 1989 , 110 x 110mm nahani trap with jali , 20mm socket suitable for 20mm dia pp r pipes confirming to is 1239 1989 , 20mm equal tee suitable for 20mm dia pp r pipe conforming to is 1239 1989 , cp stop cock 15mm cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe , 20mm union suitable for 20mm pp r pipes confirming to is 1239 1989 , pp r end plug 20mm confirming to is 1239 1989 , pp r pipe clamp suitable for 20mm piping , rotational moulded polyethylene water storage tank double layer type cylindrical vertical tank 1000 ltrs capacity , ppr tank coneector 20mm with check nut and washer complete , white lead safeda solvent 200 ml , thread cotton ball 100 m long , snow white colour wash hand basin of size 550 x 400mm alongwith full pedestal conforming to is 2526 part iv 2004 , soap tray ptmt 18 feet long incl brass screws make prayag , cp pillar cock 15mm brass cromium plated fency type pillar tap , ppr reducer socket 20mm 15mm , ppr reducer elbow 20 obliq 15mm conforming to is 1239 1989 , teflon tape , 600x450mm size looking mirror mounted on pvc with pvc shell assembly including all fittings all as specified , adhesive solution sr 998 for jointing of pvc pipe and insulation etc , pp r ball valves with rod including complete accessries etc brass insert as per requirement of the site , drilling machine portable type electrically driven , aluminum straight edge 50mm square 2mm thick 1800mm long , wooden flat gurmala , hand rivet gun machine , tile cutter machine with 6 spare blades each , tasla iron 18 inch , cutting plier insulate 6 inch , screw driver 12 inch with insulated plastic handle , adjustable spanner 12 inch , hacksaw frame with 2 blade , hand gloves insulated with 2 rubber , drill bit 6mm dia , drill bit 8mm dia , drill bit 10mm dia , tape measuring metallic 30m , mason trowel karchi , axepicks with wooden handle , fawda with wooden handle , rammer with wooden handle of wt 5 kg , pipe wrench 12 inch , pipe wrench 18 inch , aluminum spirit level 6 inch , brick line best quality , ppr welding electrode 20 to 63mm , plumbob 250gms , tape measuring metallic 5m , supply of stainless steel hamam tank ss 1000 ltrs

Central Government/Public Sector

TRN :34328814 | 30 Apr, 2025

Tender Value : 0

Rajahmundri - Andhra Pradesh

Tender for expression of interest up integrated drilling project management services including well design, drilling rig, associated services of drilling, equipment, material procurement, and personnel for drilling 03 nos. of ultra high pressure high temperature exploratory wells.

Related Searched Keywords : drilling material

List of drilling-material Tenders

Tender for gem bids forcustom bid for services - collection of samples at various places of ad3 extended to c4 to c10a waste dump material at diom hilltop for assessing the incidence of iron content through drilling boreholes using a suitable exploration drilling machin..

Tender for expression of interest for integrated drilling project management services including well design , drilling rig , associated services of drilling , equipment , material procurement and personnel for drilling 03 nos.

Tender for drilling 200 mm dia up to 60 mtrs deep tube well by dr drilling rig with supply of various type of required bore materials in district vadodara under different programme

Tender for expression of interest up integrated drilling project management services including well design, drilling rig, associated services of drilling, equipment, material procurement, and personnel for drilling 03 nos. of ultra high pressure high temperature exploratory wells.

Get drilling material Tender Alert...

Related Searched Keywords : drilling material

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us