Filters

List of ear-machine Tenders

List of latest ear-machine Tenders in Indian Tenders. Click on any ear-machine Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for ear-machine Tenders.

All-Tenders (22)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Local Bodies

TRN :49021372 | 01 Jan, 0001

Tender Value : 0

Mandi - Himachal Pradesh

Tender for tender for supply of sand crusher, gravel crusher 10, 20, 40mm, soling boulder (cut stone) stone, brick for earthen kiln, soil cutting and breaker by jcb/lnt machine, movement of material (within panchayat area and from cement thunag karsog to panchayat including uphill and downhill movement) by tractor jeep other vehicle, shuttering iron and wood, wood iron and aluminium fittings and door window, ply board sheets other fashion ceiling pailing/ pvc torn sheets/, labour rate piling pvc and udon, hardware items (rebar 8, 10, 12, 16mm, angle, channel size wise, tile, paint, railing iron building fiting, pvc/hdpe pipes different sizes, sanitary fittings and labour rate etc.), colour coated roof sheets etc. and ceiling sheets etc., high mask lights. rcc bulvert pipe, furniture items (all types of office household furniture), welding works, mixer machine, painter (with or without paint), apple plum pear plants authorized and certified by the horticulture department, sign board (22, 24 etc. size), wall writing painting (for painting of 6*4,65,66 etc. size), animal statue bench etc. for krishna dham in gram panchayat deem, electrical fitting material and lever gas electric heater, computer system, water dispenser, stationery, various items for sanitation management, digital board, other materials

corporations/Associations/Others

TRN :49021828 | 13 May, 2025

Tender Value : 0

Pune - Maharashtra

Tender for providing basic facilities at pune municipal corporation and rani lakshmibai womens industrial training institute-1. non comprehensive maintence contract of computer with al necessary supplying accessories, servicing & software data loading as per instruction by dept. non comprehensive maintanence contract of ups batteries with all necessary supplying accessories, servicing as per instruction by dept. headphones with mic with 3.5 mm drivers, in-built noise cancelling foldable and adjustable - driver size 40mm speaker impedance 32 ohm frequency response-20hz-20khz sensitivity-105db microphone impedance - 1.2k ohm microphone sensitivity = -58db + 2db connector type dual 3.5mm jack cable length-1.8m package dimension - 168 x 90 x 200 mm warranty 1 year usb 3.0 desktop ram - item height-13.3 centimeters item width - 0.1 inches ram size 8 gb memory technology- ddr3 computer memory type ddr3 sdram memory clock speed - 1600 mhz voltage-1.5 volts wattage - 1.2 warranty 1 years web camera for desktop dsp chip: driverless image sensor: cmos lens: 5p lens digital zoom: 4x zoom digital video format: mjpg, yuy2 wide angle: 85-90 degree lens: superior quality glass lens dynamic resolution: 1280x720p frame rate: 30fps (usb2.0) line length: 140cm system support: windows xp/vista/7/8/10 warranty - 1 years solid state drive interface - nvme (pcie gen 4 x4) ssd endurance (tbw) 300tb form factor m.2 (2280) ssd series-t500 capacity 500gb sequential read-7200 mb/s sequential write-5700 mb/s warranty 3 years 7 mouse optical tracking dpi (min/max): 1000? number of buttons: 3 (left/right-click, middle click) line-by-line scrolling scroll wheel: yes, optical black plastics: 72% post-consumer recycled material product carbon footprint: 1.73 kg co2e 3-year limited hardware warranty cable length: 180 cm warranty 1 years keyboard spill-resistant design 10-key number pad caps lock indicator light num lock indicator light up to 10 million keystrokes key type: deep profile black plastics: 51% post-consumer recycled material product carbon footprint: 4.02 kg co2e 3-year limited hardware warranty warranty 1 years pendrive - 64gb flash drive compatible with: laptops | desktops form factor: flash version: usb 3.0 password protection 60 months warranty 10. 12. supply & fixing of wiring & cabling complete set up for indoor and outdoor for wiring, cctv setup and networking connector type-bnc cable type - coaxial compatible devices - camera special feature - high speed compatible phone models - hd camera ethernet cable category - cat 5 connector gender - female-to-male 13. providing, fixing & fitting of 1 sqmm, 2.5 sqmm & 6 sq.mm wiring & cabling set up with all neccesary points & material including casing, caping & labour & all light fittings, earthing, l point, p point, circuit point, light point, fan point, full plug point, half plug point, power point, ac point, led tube lights & tube fitting, fan regulators, fan dimmers etc. 10. new motor 1/16 hp novel / rajesh / navkar 11. sewing machine table novel rajesh / navkar 14. sewing machine double part servicing novel / rajesh / navkar 8.

Government Departments

TRN :49022269 | 21 May, 2025

Tender Value : 8.46 Lacs

Agra - Uttar Pradesh

Tender for tender for zone-1, chhatta ward no. 27, bagh muzaffar khan, from saint john square to near garg homeo hall, hotmix road improvement work. - dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material up to a lead of 1 kilometre, as per direction of engineer-in-charge. 2 supplying and stacking at site 53 mm to 22.4 mm size stone aggregate 3 supplying and stacking at site stone dust 4 preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres. 5 surface dressing one coat on old surface with bitumen of specified grade at the rate of 1.22 kg/ sqm of surface area with 1.10 cum of stone chippings 11.2 mm nominal size per 100 sqm of road surface, including consolidation with road roller of 6 to 8 tonne capacity etc. complete: using bitumen emulsion (minimum 50% bitumen content- rs grade conforming to is : 8887) 6 providing and applying tack coat using bitumen emulsion conforming to is:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanicalbroomon bituminous surface @ 0.25kg/sqm 7 providing and laying dense graded bituminous macadam using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of engineer-in-charge.50 to 100 mm average compacted thickness with bitumen of grade vg-30 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of aggregate) prepared in batch type hot mix plant of 100-120 tph capacity 8 providing and laying bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of engineer-in-charge. 40/50 mm compacted thickness with bitumen of grade vg-30 @ 5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of aggregate) prepared in batch type hot mix plant of 100-120 tph capacity 9 providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatichermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, t&p, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of engineer-in-charge and accordance with applicable specifications. 10 reflective raised pavement markers (cat eye/ road stud) supply and flxing of raised pavement marker with made of plastic body of rpimi road stud shall be moulded from asa (acrylic styrene acrylonitrile) or hips (high-lmoact polystyrene) or acryloniilrile butadien styrene (abs) or any oiher suitable malerial approved by the engineer. the marker shall support aload of 13,635 kg tested in ccordance with astm d4280.the reflective panels shall consist of number of lenses containing single or dual prismatic cubes capable of providing total internaleflection of the lighl entring the lens face. lenses shall be mouled of methyl melhecrylate conforming io astm d78b of equivalent the slop or retro-reflecting surface shall preferably be 35+1-5 degree to base and the area of each relro _reflecling sllrface shall not be less than 13.00 sq.cm the marker height shall not be less lhan 10 mm and shall nol exceed 20 mm & width shall not exceed 130 mm. the base of the marker shall be flal within 1.3 mm all road studs shall be legibly marked wilh the name , lrade or other means of identification of the manufacture. epoxynslallations, excess adhesive around the edge of the malker, excess adheslve on the pavemenl and adhesive on the exposed surfaces of the markers shall be immedialely removed. the contractor shall submit a two year warranty for sal sfactory lleldeformance including stipulated retro-refleclance of the reflecting panel , to the engineer . ln addition a two year warranty foralisfactory infield perfonnance of the finished road marker shall also be given by lhe conlractor who carries out the work of fixing of reflective road ma*ers. ln case the markers are displaced , damaged . gel worn out or lose theireflectivity compared lo stipulated standards , the contractor would be reqlllred to replace allsuch markers within 15 days ofthe inlimation from the engineer. at his own cost the rate shall include all materlals, labour, t&p,ransportalion, insiallation and incidentals all complete as per direction of the engineer-in-charge 11 supply & fixing granite stone work display board (size 2.50ft x 4.00ft) including painting, lettering etc. all complete. (none schedule) 12 sub total 13 add/deduction rs. for estimate figure amount match 14 grand total

corporations/Associations/Others

TRN :49024378 | 10 May, 2025

Tender Value : 7.20 Lacs

Kanpur - Uttar Pradesh

Tender for tender for 38-construction of mokshdham at gram chakothi block- chakothi - boring of 25cm dia piles of double under reamed of 50cm dia of bulb and 3.60 meter depth in b.c. soil with hand operated auger machine 2 r.c.c . work in cement coarse sand and 20mm gauge stone gride in proportion 1:2:4 in piles grade beam excluding supply of reinforcement and also including supply of all material labour t&p centeringand shuttering etc. 3 r.c.c . work in cement coarse sand and 20mm gauge stone gride in proportion 1:2:4 in columns excluding supply of reinforcement and also including supply of all material labour t&p centeringand shuttering etc. 4 m-150 brickwork in 1:6 cement and fine sand mortor including cost of material , labour, t&p complete 5 m-150 brickwork in 1:6 cement and fine sand mortor including cost of material , labour, t&p complete in super structure 6 r.c.c . work in cement coarse sand and 20mm gauge stone gride in proportion 1:2:4 in lintel t-beam, slab excluding supply of reinforcement and also including supply of all material labour t&p centeringand shuttering etc. lintel 7 m.s. work in r.c.c. incluing supply of steel its wastage and hooks and authorised overlap 8 earth work in filling by cartage of earth from 1.00km by tractor trolly. 9 12mm thick plaster work in 1:4cement and fine sand mortor 10 coarse sandfilling under floor 11 laying of pcc in 1:6:12 cement ,sand and 40mm stone ballast in base concrete 12 laying of 80mm thick rouble moulded interlocking concrete pavment as per drawing and design clause 1501 13 p/applying white cemnent based putty of avg. thickness 1mm of appd. brand over the plastered wall surface to prepare to surface even and smooth 14 finishing wall tex tured exterior paint of required shad : new work ( two or more coat) @3.28ltr /10sqm over and including priming coat of exterior primer applied @2.20kg /10sqm 15 12 mm thick plaster in 1:2 cement and coarse sand mortor over slab 16 site clearence before and after completion the work 17 imformation board + photography 18 installation of hand pump 19 tranpotation of handpump material and t&p from divi. store to site of work 20 hiring charge of necessary t&p and equipment requried for instalation of handpump cutter , wire rope lamps wooden planks ,loading arrengment for palm and presser for com. days including excavation of pit and water etc. complete 21 p/ of india mark hand pump machine and pipe etc 22 standerd deepwell hand pump machine complete 23 140mm pvc pipe 8kg per sqm 24 p/ o 32mm diameter gi pipe b class all completion 25 to make vertical bore 150mm dia boring by hand boring in following depthsin soil mixed with morum /shingle /kankar the depth of bore shall be according to strata condition this shall be decited by eng. i/c 26 0-30m 27 31-50 28 51-60 29 s/f of end cap 110 mm dia required including all material labour t&p 30 s/f of nylon meshrequired including all material labour t&p 31 preparation of assembly as per eng. i/c and lowering of assembly consisting of110mm dia pvc pipe 6kg/sqcm, 1 kg /sqcm, 10 kg /sqcm and testing ets vertically along with stainer pipe fitted at bottom . 32 0-45m 33 45- above bgl 34 s/filling coarse sand arround stainer ( up to 3 mtr. from the bottom of stainer and filling of bentonite between bore hole and casing pipe including all material labour t&p 35 lowring of 32mm dia gi pipe with ets cutting , threding etc. com. 36 development of drilled bore hole sand till free yield of water is achieved in newly constructed bore hole including all material labour t&p etc. com. and installation of india marka ii hndpump (padestal) its position and its centering 37 disaffection by chlorination work of development work of after handpump installation after devlopment including supply of all chemicals required. 38 const. of pcc plateform in 1:2:4 of size 1.85 mtr. dia as deparmental type design for india marka handpumpe 39 const. of pccdrain in 1:2:4as deparmental type design complete 40 embossing on pedestal as per direction of eng.i/c 41 provision for testing of water sample in district water qlty.lab of newly installed handpumpe

Local Bodies

TRN :49025425 | 16 May, 2025

Tender Value : 0

Meerut - Uttar Pradesh

Tender for tender for supply of 1. sand, earth filling work, brick, cement, concrete, gravel, rebar, dust, raw ballast, stone ballast, interlocking tiles, floor and wall tiles 2. solar light installation and repair, street light installation and repair 3. iron bench, open gym, library, school swing 4. tank fitting, hand pump repair and rebar items 5. school, anganwadi center and materials used in panchayat office 6. electrical equipment fittings and materials 7. wall painting, flex, unipole and other works 8. stationary, dustbin, computer equipment, camera, printer etc. 9. channel fabrication, doors, windows etc. 10. corona protection related materials 11. jcb and tractor trolley and cleaning equipment etc. for pond/drain cleaning work 12. e-rickshaw purchase, fogging machine purchase, water cooler, r.o. and timely supply of other materials like public toilet etc. 13. compressor/shredder, cutting machine etc. for garbage disposal. 14. citizen information board, high mask light

Local Bodies

TRN :49025435 | 13 May, 2025

Tender Value : 0

Meerut - Uttar Pradesh

Tender for tender for supply of 1. sand, earth filling work, brick, cement, concrete, gravel, rebar, dust, raw ballast, stone ballast, interlocking tiles, floor and wall tiles 2. solar light installation and repair, street light installation and repair 3. iron bench, open gym, library, school swing 4. tank fitting, hand pump repair and rebar items 5. school, anganwadi center and materials used in panchayat office 6. electrical equipment fittings and materials 7. wall painting, flex, unipole and other works 8. stationary, dustbin, computer equipment, camera, printer etc. 9. channel fabrication, doors, windows etc. 10. corona protection related materials 11. jcb and tractor trolley and cleaning equipment etc. for pond/drain cleaning work 12. e-rickshaw purchase, fogging machine purchase, water cooler, r.o. and timely supply of other materials like public toilet etc. 13. compressor/shredder, cutting machine etc. for garbage disposal. 14. citizen information board, high mask light

Local Bodies

TRN :49026499 | 16 May, 2025

Tender Value : 0

Meerut - Uttar Pradesh

Tender for tender for supply of 1. sand, earth filling work, brick, cement, concrete, gravel, rebar, dust, raw ballast, stone ballast, interlocking tiles, floor and wall tiles 2. solar light installation and repair, street light installation and repair 3. iron bench, open gym, library, school swing 4. tank fitting, hand pump repair and rebar items 5. school, anganwadi center and materials used in panchayat office 6. electrical equipment fittings and materials 7. wall painting, flex, unipole and other works 8. stationary, dustbin, computer equipment, camera, printer etc. 9. channel fabrication, doors, windows etc. 10. corona protection related materials 11. jcb and tractor trolley and cleaning equipment etc. for pond/drain cleaning work 12. e-rickshaw purchase, fogging machine purchase, water cooler, r.o. and timely supply of other materials like public toilet etc. 13. compressor/shredder, cutting machine etc. for garbage disposal. 14. citizen information board, high mask light

State Government

TRN :49029493 | 15 May, 2025

Tender Value : 32.33 Lacs

Gautam Buddha Nagar - Uttar Pradesh

Tender for construction of e-library room in village begmabad yea. wc-06 - earth work in excavation in ordinary soil in all of foundation trenches including dressing of the side and ramming of bottom.lifts up to 1.50 m including getting out theexcavated soil and disposal of surplus excavated soil as directed with in a lead of 50m. (most/a.r./yeida) 2 supplying chemical emulsion in sealed containers including delivery as specified. chlorpyriphos/ lindane emulsifiable concentrate of 20%. (dar/2.34.1/based on uppwd/sor-2020)) 3 diluting and injecting chemical emulsion for post-constructional anti-termite treatment (excluding the cost of chemical emulsion) : treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 coarse sand) to match the existing floor: with chlorpyriphos/lindane e.c. 20% with 1% concentration (dar/2.35.3.1/based on uppwd/sor-2020)) 4 2.5 cm thick damp proof course with cement and approved coarse sand 1:1½ with and including water proofing as ordered by the engineer incharge in the proportion as specified by the manufacturer including supply of all materials, labour, tools & plants etc. required for proper completion of the work and including proper curing & shutterings as necessary. (uppwd/sor-2020/361) 5 applying a coat of residual petroleum bitumen of grade of vg-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. 6 cement concrete with 4cmgauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1 including supply of all material, labour, tools&plants etc required for proper completion of the work. 7 b/w with bricks of class 150 in foundation & plinth in cm 1:4 (based on up pwd sor 2020) cement mortar 1:4 ( 1cement :4coarse sand) 8 m-150 brick work in 1:4 one cement and four course sand 2.20 f.m. mortar superstructure but for walls of half brick thick including supply of all material, labour, t&p etc. required for proper completion of the work. (uppwd/sor-2020/305(a)+310a 9 m-150 brick work in 1:4 one cement and four course sand 2.20 f.m. mortar superstructure but for walls of half brick thick including supply of all material, labour, t&p etc. required for proper completion of the work. (uppwd/sor-2020/305(a)+310a 10 extra for providing and placing in position 2 nos 6mm dia. m.s. bars at every third course of half brick masonry.uppwd-sor-2020-dar-18/6.15/ 11 providing and laying in position machine batched and machine mixed design mix m-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per is: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer-in-charge. (note :- cement content considered in this item is @ 330 kg/cum. excess/ less cement used as per design mix is payable/recoverable separately). all works upto plinth level 12 providing and laying in position machine batched and machine mixed design mix m-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per is: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer-in-charge. (note :- cement content considered in this item is @ 330 kg/cum. excess/ less cement used as per design mix is payable/recoverable separately).all works above plinth level upto floor v level 13 centringand shutteringincluding strutting, propping etc. andremoval of form for : foundation footings, base of column 14 centringand shutteringincluding strutting, propping etc. andremoval of form for : lintels, beams, plinth beam, grinder 15 centringand shutteringincluding strutting, propping etc. andremoval of form for : suspended floors, roofs, landings 16 columns, pillars, piers, abutments, posts and struts. (dar/5.9.6/based on uppwd/sor-2020)) 17 edges of slabs and breaks in floors and walls:under 20 cms wide. (dar/5.9.16.1/based on uppwd/sor-2020)) 18 earth work in rough excavation , banking excavaated earth in layers not exceeding 20 cm in depth, breaking clods watering, rolling each layer with 1/2 tonnes roller or wooden or steel rammer and rolling every 3rd and top most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, all leads as per(a.r. )for all kind of soil. 19 steel rainforcement for r.c.c. work including straightening, cutting bending, placing in position and binding all complete upto plinth level thermo-mechanically treated bars of grade fe-500d or more./cold twisted bars. (dar/5.22.6/based on uppwd/sor-2020)) 20 12mm cement plaster of mix: 1:6 (1 cement : 6 coarse sand)based on up pwd sor 2020 dar-18/13.4.2 21 6mm cement plaster of mix: 1:3 (1 cement : 3 coarse sand)based on up pwd sor 2020 dar-18/13.17 22 15mm cement plaster of mix: 1:6 (1 cement : 6 coarse sand)based on up pwd sor 2020 dar-18/13.4.2 23 finishing walls with acrylic smooth exterior paint of required shade: new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). 24 distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade 25 providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.dar-18/13.26 26 painting with synthetic enemel paint of approved brand and manufacture to give an even shade: two or more coats on new work. 27 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes. 110mm dia 28 providing and fixing on wall face unplasticised - pvc moulded fittings/ accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion. single tee with door 110x110x110 mm (dar/12.42.3.2/based on uppwd/sor-2020) 29 bend 87.5° 110 mm bend (dar/12.42.5.2/based on uppwd/sor-2020) 30 shoe (plain) 110 mm shoe (dar/12.42.6.2/based on uppwd/sor-2020) 31 providing and fixing unplasticised -pvc pipe clips of approved design to unplasticised - pvc rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with m.s. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm (dar/12.43.2/based on uppwd/sor-2020) 32 providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.(dar/12.44/based on uppwd/sor-2020) 33 steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.dar-18/10.25.2 34 providing and fixing water closet squatting pan (indian type w.c. pan with 100mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required white vitreous china orissa pattern w.c. pan of size 580x440mm with integral type foot rests.up pwd sor-2020-dar 18/17.1.1 35 providing and fixing wash basin with c.l. brackets, 15 mm c.p. brass pillar taps,32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:uppwd sor-2020-dar 17.7.1 36 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge.20mm od pipes. (dar/18.8.2/based on uppwd/sor-2020) 37 25mm od pipes. (dar/18.8.3/based on uppwd/sor-2020) 38 providing and fixingbrass gate valve with c.i. wheel of approved quality (screwed end) : 25 mm nominal bore. (dar/18.17.1/based on uppwd/sor-2020) 39 32 mm nominal bore. (dar/18.17.2/based on uppwd/sor-2020) 40 providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to is. 2645 and approved by engineer-in-charge over the rcc slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement: 5 coarse sand) admixed with water proofing compound conforming to is : 2645 and approved by engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to is : 2645 and approved by engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) after two days of proper curing applying a second coat of cement slurry using 2.75kg! sqm of cement admixed with water proofing compound conforming to is : 2645 and approved by engineer-in-charge. d) finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 coarse sand) admixed with water proofing compound conforming to is: 2645 and approved by engineer-in-charge including laying glass fibre doth of approved quality in top layer of plaster and finally finishing the surface with trowe’ with neat cement suvr an making pattern ot 300x300 mm square 3mm deep. e) the whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. all above operations to be done in order and as directed and specified by the engineer-in-charge: dar18/22.7.1 41 providing and placing on terrace (at all floor levels) polyethylene water storage tank isi: 12701 marked with cover and suttable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank dar 18/ 18.48 42 making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - iii) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.(dar 2018-4.17)based on uppwd sor/2020 43 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. size of tile 600x600mm (dar/11.41.2/based on uppwd/sor-2020)) 44 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (dar/8.31/based on uppwd/sor-2020)) 45 providing and fixing brass bib cock of approved quality: 15 mm nominal bore (dar/18.15.1/based on uppwd/sor-2020)) 46 providing and fixingbrass gate valve with c.i. wheel of approved quality (screwed end) : 25 mm nominal bore. (dar/18.17.1/based on uppwd/sor-2020) 47 providing and fixing nahani trap 75x100mmincluding all complete. 48 20 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand-dar-18/13.6.1/p-902 49 providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30mm thick including isi marked stainless steel butt hinges with necessary screws. (dar/9.21.2/based on uppwd/sor-2020)) 50 extra for providing isi marked stainless steel butt hinges instead of m.s. pressed butt hinges bright finished of required size with necessary screws. (shutter area to be measured). (dar/9.14/based on uppwd/sor-2020)) 51 renewing panes of glass in door, window & ventilators or fixing in the new work with 3mm thick glass panes fixed with brads & putty includung supply of all material , labour , tools & plants required for proper completion of workuppwd sor 2020/p26/806 52 prroviding and fixing isi mark 3 layer prelaminated particle board conforming to grade 2 type-iii of is-12823/20b laminated with 0.6-0.8 mm thick laminate conforming to is-2046/1995 and balancing lamination of 0.5 mm thick on the back side (size 700750430) including all complete 53 supply of work sb collection office/visitor chain with sheat dxwxh 400400450 mm padded with polyurithane foam complete 54 supply wook at site sb collection executive table of 3 layer prelaminated particle board (wood product) of grade 2 type 2 of is-12823/latest 1830 mm 950 mm 750mm including all complete 55 supplying and filling in plinth with jamuna sand under floors, including watering, ramming, consolidating and dressing complete. dar-18/2.27 56 providing and fixing factory made isi marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as f7d, f4b, k11 b and k12 b etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of c.c. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 57 constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast r.c.c. horizontal grating with frame complete as per standard design with common burnt clay f.p.s. (non modular) bricks of class designation 7.5.(dar/18.33.1/based on uppwd/sor-2020) 58 providing, laying and jointing glazed stoneware pipes class sp-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : (dar/19.1.1/based on uppwd/sor-2020) 59 providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round s.w. pipes including bed concrete as per standard design : (dar/19.2.2/based on uppwd/sor-2020) 60 providing and fixing square-mouth s.w. gully trap class sp-1 complete withc.i. grating brick masonry chamber with water tight c.i. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: (dar/19.4.1/based on uppwd/sor-2020) 61 providing and fixing heavy class ss gratingof approved design including setting in floor with cement motor to match with floor finish as per architect requirement suitable for waster and ft, ut & fd.size 150 mm x 150 mm 62 providing and fixing ptmt towel rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.(dar/17.73.2/based on uppwd/sor-2020)) 63 providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete. (dar/17.31/based on uppwd/sor-2020)) 64 providing and fixing ptmt soap dish holder having length of 138mm, breadth102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. (dar/18.65/based on uppwd/sor-2020)) 65 providing and fixing chicken wire mesh (murga jali) 24 gauge and 20 mesh at junction of rcc and masonry walls including fixing in position with steel nails of 25 mm in length as approved at required as directed by engineer-in-charge, scaffolding etc. complete. (ar/yeida//based on uppwd/sor-2020))½x24 gauge 66 providing and fixing aluminium hanging floor door stopper, isi marked, anodised (anodic coating not less than grade ac 10 as per is: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.(dar/9.101.1/based on uppwd/sor-2020))single rubber stopper 67 providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:250x10mm(dar/9.97.2/based on uppwd/sor-2020)) 68 providing and fixing aluminium handles,isi marked, anodised (anodic coating not less than grade ac 10 as per is: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete.125 mm (dar/9.100.1/based on uppwd/sor-2020)) 69 providing and fixing ptmt extension nipple for water tank pipe, fittings of approved quality and colour.25mm nominal bore, weighing not less than 62 gms. (dar/18.75.3/based on uppwd/sor-2020)) 70 providing & fixing of cp heavy duty bottle trap 32mm. (complete complying with relavent standard specification and as directed by the competent authority.) for wash basin&urinal 71 providing and fixing 1 mm thick m.s. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm m.s. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and t- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer up pwd sor-2020-dar-18/10.4 72 construction of granular sub-base by providing close graded material, mixing in mechanical mix plant at omc, carriage of mixed material to work at site, spreading uniform layers with motor grader on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 for grade-1 material. (morth/(ar/yeida/based on uppwd/sor-2020) 73 providing and laying 60mm thick i.s.i. mark factory made cement concrete interlocking concrete paver block made by block making machine with strong vibratory compaction of approved size, design, shape, laid in required colour and pattern over and including average 50mm thick compacted bed coarse sand and filling the joints with fine sand all complete as per the direction of engineer-in-charge with conforming to is-15658 and irc:sp:63. (ar/yeida/ based on uppwd/sor-2020) 74 wiring point for light in 1.5 sq. mm. pvcinsulated singlecorecopperconductor cable (inpvcconduit with 1.5sq.mm. frlsh pvc insulated multistrand copperconductor cable as earth wire drawn inside conduit.)and5 amp.flush typeswitch& ceiling rose/angle/batten holderfixedwith3mmthickphenolic laminate backalitesheet withbrass machinescrews andcup washers mounted overexisting m.s.switch boardbox/junction boxwith supplyofallmaterial, labour& t&p etc. requiredforproper completion of the work complete in all respect, as directed by engineer in charge pwd-2018 ps no-174c 75 supply and wiring of submains with 2 nos. of 2.5 sq. mm. frlsh pvc insulated1100 vgrade multistrand singlecore copper conductorcable in 25mm dia heavy duty (2mm thick) pvc conduitwith2 nos 2.5 sq.mm.frlsh pvc insulated multistrand copperconductor cable asearth continuity wire drawn in conduit complete in all respect, as directed by engineer in charge pwd-2018 ps no-261c 76 supply and fixing of power plug with 20 amp./250 voltflush type modularswitchand 5 pin 20 a/250 voltflush typeuniversal modular socket switch on concealed m.sboxincluding supply of allmaterial, labourt&petc. complete in all respect, as directed by engineer in charge .pwd-2018 ps no-1139a 77 s&f surface/flush mounting 8 ways spn distribution board with additional metal door without mcb complete in all respect, as directed by engineer in charge. pwd-2018 ps -1024a 78 s&f of 6 amp to 32 amp. mcb (10 ka) c curve complete in all respect, as directed by engineer in charge.pwd-2018ps -1002cat-a 79 s&f of 40amp. dp mcb (10 ka) c curve complete in all respect, as directed by engineer in charge. pwd-2018 ps no-1010 cat-a 80 providing and fixing circular/ hexagonal cast iron or m.s. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick m.s. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ m.s. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. clamp shall be made of 12 mm dia m.s. bar bent to shape as per standard drawing. (dar/10.18/based on uppwd/sor-2020))

corporations/Associations/Others

TRN :34419024 | 14 May, 2025

Tender Value : 0

Ranchi - Jharkhand

Tender for gem bids for electrical e 8 student kymograph , myograph stand , du bios reymond induction coil , simple key , short circulating key , pohl s commutator , vibrating interrupter , new nerve muscle chamber , muscle lever for the use with muscle chamber , muscle grip of femur clamp , hook and weight , heart liver , frog dissection board , enamel tray , frog board , low voltage unit for tapping , electromagnetic time marker , tuning fork, n 100 with stylus , simple electrode , x blocks , sprit lamps , marey tambour , microscope , demonstration eye pieces , double demonstration eyepiece , stage incubators , westergen pipettes for esr on stand , wintrobe pipette for esr and pvc with stand , perimeter priestley smith model , haemoglobinometer , haemocytometers with red and white pipettes , sphygmomanometer digital , stethoscopes , stethoscopes, demonstration with multiple ear pieces , polygraph , venus pressure apparatus , spirometer , gas analyser , van slykos apparatus manometric , gas analysis automatic for co2, o2,n2 , douglas bag , benedict roth recording spirometer , mosso s ergograph , clinical thermometer digital , compass aesthesiometer , thermanaesthesiometer , algometer , apparatus for passive movement comprising , knee hammer , pneumograph stethograph , bicycle ergometer , olfactometer , ophthalmoscope , schematic eye , phacoscope , perimeter , colour perception lantern edridge green , maddox rod , newton s colour disc , tuning forks to test hearing , grip dynamometer , otoscope , sterilizer electric , instruments trolley , stop watch , physiograph, 3 channels, complete with accessories , physiograph, single channel , centrifuge rectangular , digital photo colorimeter , digital ph meter , laboratory refrigerator , oxygen cylinder with trolley , co cylinder with trolley , electronic stimulator , water still , all glass distillation sets , voltage stabilizer , thermometers , balances , micro slides , glassware , digital physiograph , charts and model , ecg machine single channel

Central Government / Public Sector

TRN :34403421 | 09 May, 2025

Tender Value : 0

Kinnaur - Himachal Pradesh

Tender for gem bids for fibre glass reinforced plastic , reinforced nyloguard 9x9 mtr , rubber foam mattresses , foundation bolt , foundation bracket , gun machine for applying silicon , silicon tube 200 gm , bolt ms galvanized , bolt ms galvanized m10x125 mm , bolt ms galvanized m10x100 mm , bolt ms galvanized m10x75 mm , guy rope , grouting peg for guy rope , rubber gasket , wc indian type , racks , repair kit , double bunks , fire extinguisher ball 1kg 300gm , foot scrapper , iron foot mat , jute foot mat , puf tank 1000 ltr , water staging tank , frp ug bio digester septic tank 1000 ltr , fd heating device , electrically operated water heating device , synthetic enamel paint , tarpentine oil , red oxide , ordinary portland cement grade 43 , coarse sand , coarse aggregate 20mm graded , stone aggregate 40mm graded , hollow block , quick settng cement compound , wall peg set , earthing set , lightening conductor set , solar lantern systems , 16 sqmm 4 core aluminium conductor , cp towel rail , soap dish , wall hung corner wash hand basin , precast rcc slab , plastic bathroom bucket 25 ltr and mug , squared rubble stone , stone aggregate 63mm graded , bulk head led light fittings , ceiling rose , switch piano flush type 5 amp , switch piano flush type 5 amp socket 3 pin , switch piano flush type 15 amp , pvc square block , pvc conduit pipe 20mm dia , pvc bend 20mm , pvc junction box 3 way , pvc saddle clip 12 mm dia 100 nos , pendent holder , gang box 5 switches 5 amps , gang box 3 switches 5 amps , gang box 1 switch 5 amps , screw full threaded 1 inch , screw full threaded 2 inch , mcb 6 amp sp , mcb 16 amp sp , isolator double pole 63 amp , insulation tape , 18 watt led tube , wire 1 sqmm , wire 1 point 5 sqmm , wire 2 point 5 sqmm , distribution board 12 way , exhaust fan 305 mm sweep , tube light fitting 1x18 watt box type , ppr pipe 25mm dia , ppr pipe 16mm dia , ppr tank connector 25mm dia , ppr tank connector 16mm dia , ppr gate valve connector 16mm dia , ppr gate valve connector 25mm dia , ppr elbow 90 degree plane 25mm dia , ppr elbow 90 degree plane 16mm dia , ppr tee reducer 25 to 16mm dia , ppr union outer dia 16mm dia , ppr union outer dia 25mm dia , ppr wall clamp dia 16mm dia , ppr wall clamp dia 25mm dia , ppr socket 16mm dia , ppr plug dia 25mm dia , ppr plug dia 16mm dia , ppr female threaded elbow 16mm dia , ppr male threaded socket 16mm dia , ppr female threaded socket 16mm dia , ppr female threaded socket 25mm dia , insulation for 25mm dia ppr pipe , insulation for 16mm dia ppr pipe , ppr tee 16mm , ppr welding tools , ppr pipe scessor , adhessive solution sr 998 , pvc 110mm dia tee , pvc 110mm dia socket , pvc 110mm dia elbow , pvc pipes single socketed , bib cock cp long neck 15mm , pvc 75mm dia tee , pvc 75mm dia socket , pvc 75mm dia elbow , cp grating with hole for waste pipe , cp grating without hole , pvc floor trap 75mm dia , pvc insulated connection 16mm dia , cp angular stop cock , pvc pipes single socketed in any length , looking mirror , tafelon tape

Related Searched Keywords : ear machine

List of ear-machine Tenders

Get ear machine Tender Alert...

Related Searched Keywords : ear machine

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us