Filters

List of ms-pipe-line Tenders

List of latest ms-pipe-line Tenders in Indian Tenders. Click on any ms-pipe-line Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for ms-pipe-line Tenders.

All-Tenders (33)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

corporations/Associations/Others

TRN :34855080 | 06 Aug, 2025

Tender Value : 1.49 Lacs

Kolkata - West Bengal

Tender for replacement of 900mm dia ms pipe line at jessore rd satgachi moreback side of pay and use toilet in ward no.- 22. wbmad/ulb/sddm/nit268/7/25sl9

State Government

TRN :34859975 | 08 Aug, 2025

Tender Value : 10.64 Lacs

Bankura - West Bengal

Tender for repairing of distribution pipeline, rising main pipeline, culvert crossing by ms pipe with allied works, repairing of collecting line, construction of valve chamber etc. of lurka zone- va under raipur water supply scheme brgf ph-i under khatra su niet no. - 18 of the fy 2025-2026 of the ee/bqa, phe dte. sl no-03

Central Government/Public Sector

TRN :34864691 | 28 Jul, 2025

Tender Value : 0

Chennai - Tamil Nadu

Tender for gem bids for 1.5 hp control panel for submersible motor make bch 1p 230 v , 2 hp control panel for submersible motor make bch 3p 440 v , 6 inches mg ci joint , 6 inches ci sluice valve with flange , 4 inches ci sluice valve with flange , 3 inches ci sluice valve with flange , 7.5 hp control panel 3p 440 v make bch , 5 hp control panel 3p 440 v make bch , metallic blue paint 1 liter nippon , 2 inches paint brush vicky , 5 inches angle grinder 1p 230 v make dewalt , 7 inches angle grinder 1p 230 v make dewalt , 1.5 hp bore well submersible motor pump 1p 230 v 17 stage regular make texmo , 1 kal inches ashirvad pipe o ring , 1 kal inches ci ashirvad adapter male female , 1 kal inches ashirvad pipe red line , 50 mfd capacitor, keltron , 150 to 200 mfd capacitor, keltron , 200 to 250 mfd capacitor, keltron , 6 inches ss saddle piece , 4 inches ss saddle piece , 3 inches x 5.8 inches ss bold and nuts , 3 inches x 5.8 inches ss bold washer , 2 inches x 3.8 inches ss bold and nuts , 2 inches x 3.8 inches ss bold washer , 2 inches x half inches ss bold and nuts , 2 inches x half inches ss bold washer , 1 half inches x half inches ss bold and nuts with washer , 20 hp control panel, make bch, automatic star delta, 3p, 440 v , 20 hp mono black motor pump, make kirloskar,model kds 2050 plus , 20 hp submersible motor pump, make kirloskar, model ks 8b, 100 mm delivery, 3 stage, 3p, 440 v , 5 inches x 3 inches threaded reducer ss bush , 4 inches x 3 inches threaded reducer ss bush , 60 a, mcb, 4 pole, 3p, 440 v with metal box, make legrand , 16 a, mcb, 2 pole, 1p, 230 v with metal box, make legrand , 8 mm gland rope asbestos block , nylon rope 16 mm , coir rope 16 mm , 2 ton chain pulley black, make indef , shaft sleeve for kds 2050 plus, make kirloskar , gland ci for kds 2050 plus, make kirloskar , hand pump base , hand pump nose , hand handle body set , 32mm gi pipe b class medium jindal , m12 hand pump connecting rod 3mtr , m12 hand pump bolt nut and washer , hand pump cylinder , 12 inches wrenches taparia , 18 inches wrenches taparia , 1 kal inches bore clamp ms , 3 inches gi pipe b class medium jindal , 4 inches gi pipe b class medium jindal , 4 inches gi elbow unio , 3 inches gi coupling unio , half inches tap watertec , half inches tap long body watertec , half inches pillar cock watertec , half inches angle cock watertec , half inches x 6 inches gi pipe nipple b class , half inches x 12 inches gi pipe nipple b class , half inches gate valve brass life , hand pump bucket washer , rubber gasket sheet 4 mm , hand pump chain make ii , hand pump chain with bolt and nuts , hand pump handle axle ss , hacksaw plier bahco , castrol oil 1 liter can , castrol grease 1 kg , cotton waste , 2 inches bore clamp heavy , 3 inches bore clamp heavy , 4 inches bore clamp heavy , 4 inches foot valve leather kohinoor , bleaching powder 25kg , godrej lock 7 lever brass , 2 half inches green hose 30mtr , 7.5 hp open well submersible motor pump texmo , water meter 20mm

corporations/Associations/Others

TRN :34865044 | 24 Jul, 2025

Tender Value : 0

Chennai - Tamil Nadu

Tender for nctps isemii circle ahp dn unit i eco hopper renewal of existing eroded and damaged ash slurry disposal ms pipe line with cast basalt pipes and fittings in unit i during available shutdown

Central Government/Public Sector

TRN :34845372 | 24 Jul, 2025

Tender Value : 0

Hyderabad - Telangana

Tender for gem bids for waste fittings for washbasin and sinks as per is 2963 q3, copper alloy taps/stop valves v2 conforming to is 8931q3, plastics bib taps pillar taps angle valves and stopvalves as per is 9763:2000 latest q3, connection pipewith nuts v2 q3, flushing cistern q3, waste pipe q3, floor drain traps q3, towel rail / ring for bathroomq3, bathroom or toilet mirror v2 q4, sinks q3, bathroom water shower v2 q3, curtain pipe, sider andmounting bracket q4, wire mesh fabric or cloth v2 asper is 1568 q3, rotational moulded polyethylene waterstorage tanks v2 conforming to is 12701 q3, copperalloy gate valve for waterworks purpose as per is 778 q3, sluice valve for water works purposes 50 to 1200 mmsize v2 as per is 14846 q3, chequered plywood for busbody building parts as per is 3513 latest q3, doorhandles as per is 208 q4, stainless steel shelf rack q3, water fittings - copper alloy float valves horizontalplunger type as per is: 1703 q4, toilet seat covers v2q4, soap dish - case q4, tower bolts ferrous metalsas per is 204 q3 . . % % 4 4 /mse exemption for years ofexperience and turnoverno& % & % . . % % 4 4 /startup exemption for years ofexperience and turnoverno 5 /bid number: gem/2025/b/64457416 /dated: 15-07-2025 & & / bid document1 / 90 ? ? & & /document requiredfrom sellerexperience criteria, past performance, bidderturnover, certificate requested in atc, oem authorizationcertificate, oem annual turnover, additional doc 1requested in atc, additional doc 2 requested in atc*in case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer@ @ b b c c 6 6 & b & b d d b b 6 6 f f? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?no -- i i j j ? ? 5 5 / minimum number ofbids required to disable automatic bidextension36 b6 b 5 5, , m m -- / / number of days for which bidwould be auto--extended7 4 % 4 % /past performance80 % o %o % 6? 6? 6 6 /bid to ra enabledyeso %o % p p /ra quali cation ruleh1-highest priced bid elimination 4 4 /type of bidtwo packet bid4 4 s s /primary product categorycopper alloy taps/stop valves v2 conforming to is 8931 t t & v & v /time allowed for technicalclarifications during technical evaluation2 days w w i i x x w w 4 4 / % % d b d b c c /inspection required byempanelled inspection authority / agenciespre-registered with gemno t t x x /evaluation methodtotal value wise evaluation z & z & /arbitration clauseno /mediation clauseno //bid details /emd detail i /requiredno /epbg detail2 / 90 i /requiredno /splitting 6 / bid splitting not applied. /mii purchase preference /mii purchase preferenceyes /mse purchase preference /mse purchase preferenceyes1. preference to make in india products for bids < 200 crore:preference shall be given to class 1 local supplieras defined in public procurement preference to make in india, order 2017 as amended from time to time and itssubsequent orders/notifications issued by concerned nodal ministry for specific goods/products. the minimumlocal content to qualify as a class 1 local supplier is denoted in the bid document. if the bidder wants to avail thepurchase preference, the bidder must upload a certificate from the oem regarding the percentage of the localcontent and the details of locations at which the local value addition is made along with their bid, failing whichno purchase preference shall be granted. in case the bid value is more than rs 10 crore, the declaration relatingto percentage of local content shall be certified by the statutory auditor or cost auditor, if the oem is a companyand by a practicing cost accountant or a chartered accountant for oems other than companies as per the publicprocurement preference to make-in -india order 2017 dated 04.06.2020. only class-i and class-ii local suppliersas per mii order dated 4.6.2020 will be eligible to bid. non - local suppliers as per mii order dated 04.06.2020 arenot eligible to participate. however, eligible micro and small enterprises will be allowed to participate .thebuyers are advised to refer the om no.f.1/4/2021-ppd dated 18.05.2023.om no.1 4 2021 ppd dated 18.05.2023 for compliance of concurrent application of public procurement policyfor micro and small enterprises order, 2012 and public procurement preference to make in india order, 2017. 2. purchase preference will be given to mses having valid udyam registration and whose credentials arevalidated online through udyam registration portal as defined in public procurement policy for micro and smallenterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises andits subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail themselves of thepurchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders areexcluded from the purview of public procurement policy for micro and small enterprises and hence resellersoffering products manufactured by some other oem are not eligible for any purchase preference. in respect of bidfor services, the bidder must be the service provider of the offered service. relevant documentary evidence inthis regard shall be uploaded along with the bid in respect of the offered product or service and buyer will decideeligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 isnot an mse and mse seller s has / have quoted price within l-1+ 15% selected by buyer of margin ofpurchase preference /price band defined in relevant policy, such mse seller shall be given opportunity to matchl-1 price and contract will be awarded for 25% selected by buyer percentage of total quantity. the buyers areadvised to refer the om no. f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 forcompliance of concurrent application of public procurement policy for micro and small enterprises order, 2012and public procurement preference to make in india order, 2017. benefits of mse will be allowed only if seller isvalidated on-line in gem profile as well as validated and approved by buyer after evaluation of documentssubmitted. 3. past performance: the bidder or its oem themselves or through re-sellers should have supplied same or

Central Government/Public Sector

TRN :34853368 | 24 Jul, 2025

Tender Value : 8.29 Lacs

Pune - Maharashtra

Tender for providing, supplying and installation of pumping system along with laying of ms pipe line for pump suction, delivery and bypass arrangement including all accessories at cerc flume, cwprs, khadakwasla pune-24

Central Government/Public Sector

TRN :34833780 | 24 Jul, 2025

Tender Value : 0

Ranga Reddy - Telangana

Tender for gem bids for construction of sub base of 4 inch thick pcc of size 120 ft x 60 ftwith layer of 60 to 40 mm stone metal mixed with murum orrolling with 8 to 10 ton roller with bm 35 mm thick and sealcoat 15 mm thick, providing 5 layer synthetic acrylicstandard system consisting of one coat of acrylic primerfollowed with two layer of acrylic resurfacer and the finaltwo coats are of acrylic colour, line marking as per itfstandards alongwith white taxtured acrylic paint, 3 ft netposts made of ms pipe of 6 inch diameter set in concretesleeves, standard 42 ft wide net doubles court made ofbraided polyethylene or polyester, 10 nos phiips led floodlight 200 watt mounted on 10 nos pole and diameter of thepole 3 inch square ms pipe of height 13 ft and underground3 ft and above ground 10 ft, wiring of led flood light onpole with 200 mtr and 2 core electric cable

State Government

TRN :34839601 | 29 Jul, 2025

Tender Value : 0

Sarni - Madhya Pradesh

Tender for gem bids for water, handpump complete, handpump assembly complete, handpump head, handpump front cover, handpumphandle, handpump chamber, handpump third plate, handpump stand t., ms rod, handpump cylinderc.i., handpump cylinder c.i. brass fitting, handpumpci cap, handpump s.s. lier n and ed, brass liner, handpump chain, handpump excel, handpumpleather washer, handpump pvc washer, handpumpcylinder ring, handpump pvc rubber tikali, handpump rubber small ring, handpump upper andlower valve ci set, handpump upper valve, handpump lower valve, handpump upper valvemedani, handpump lower valve medani, handpumprod socket, handpump distance pcs, handpumpbearing, handpump nut bolt, gi pipe socket 32mm, gi pipe 32 mm

Central Government / Public Sector

TRN :34842140 | 26 Jul, 2025

Tender Value : 31.52 Lacs

Kharagpur - West Bengal

Tender for gem bids for nit9invertetypesplit, supply of 1.5 tr inverter type sac, dismantling of sac, itc of sac, supplying and fixing extra copper pipe line, supplying and laying copper cable, supplying and fixing ofpowder coated ms frame stand, supplying and fixing of 20mm dia heavy duty pvc pipe

State Government

TRN :34843231 | 30 Jul, 2025

Tender Value : 17.76 Lacs

Trivandrum - Kerala

Tender for gem bids for office chair v3 q2, steel shelving cabinets adjustabletype confirming to is 3312 v4 q3, metal beds v3 q2 . . % % 4 4 /mse exemption for years ofexperience and turnoverno& % & % . . % % 4 4 /startup exemption for years ofexperience and turnoverno 5 5 & & /document requiredfrom sellercertificate requested in atc, oem authorizationcertificate, additional doc 1 requested in atc, additionaldoc 2 requested in atc, compliance of boq specificationand supporting documentin case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer7 7 9 9 : : ; ; & 9 & 9 < < 9 9 ; ; > >? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?no -- b b c c 5 5 d d / minimum number ofbids required to disable automatic bidextension1 d /bid number: gem/2025/b/6405627; /dated: 15-07-2025 & & / bid document1 / 15 ; 9; 9 d d, , m m -- / / number of days for which bidwould be auto--extended7 o %o % ;5 ;5 ; ; /bid to ra enabledno 4 4 /type of bidtwo packet bid4 4 r r /primary product categoryoffice chair v3 s s & u & u /time allowed for technicalclarifications during technical evaluation2 days v v b b w w v v 4 4 / % % < 9 < 9 : : /inspection required byempanelled inspection authority / agenciespre-registered with gemno s s /estimated bid value1776000 s s w w /evaluation methoditem wise evaluation/ y & y & /arbitration clauseno /mediation clauseno //bid details /emd detail b /requiredno /epbg detail > /advisory bankstate bank of india 4 %/epbg percentage%5.00 b /duration of epbgrequired months.38a. , , \ v < ; / emd & performance securityshould bein favour of beneficiary, wherever it is applicable. \ \ /beneficiary : director, sctimstsree chitra tirunal institute for medical sciences and technology sctimst, thiruvananthapuram, departmentof science and technology dst, ministry of science and technologydirector, sctimst /splitting2 / 15 ; / bid splitting not applied. /mii purchase preference /mii purchase preferenceyes /mse purchase preference /mse purchase preferenceyes1. preference to make in india products for bids < 200 crore:preference shall be given to class 1 local supplieras defined in public procurement preference to make in india, order 2017 as amended from time to time and itssubsequent orders/notifications issued by concerned nodal ministry for specific goods/products. the minimumlocal content to qualify as a class 1 local supplier is denoted in the bid document. if the bidder wants to avail thepurchase preference, the bidder must upload a certificate from the oem regarding the percentage of the localcontent and the details of locations at which the local value addition is made along with their bid, failing whichno purchase preference shall be granted. in case the bid value is more than rs 10 crore, the declaration relatingto percentage of local content shall be certified by the statutory auditor or cost auditor, if the oem is a companyand by a practicing cost accountant or a chartered accountant for oems other than companies as per the publicprocurement preference to make-in -india order 2017 dated 04.06.2020. only class-i and class-ii local suppliersas per mii order dated 4.6.2020 will be eligible to bid. non - local suppliers as per mii order dated 04.06.2020 arenot eligible to participate. however, eligible micro and small enterprises will be allowed to participate .thebuyers are advised to refer the om no.f.1/4/2021-ppd dated 18.05.2023.om no.1 4 2021 ppd dated 18.05.2023 for compliance of concurrent application of public procurement policyfor micro and small enterprises order, 2012 and public procurement preference to make in india order, 2017. 2. purchase preference will be given to mses having valid udyam registration and whose credentials arevalidated online through udyam registration portal as defined in public procurement policy for micro and smallenterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises andits subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail themselves of thepurchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders areexcluded from the purview of public procurement policy for micro and small enterprises and hence resellersoffering products manufactured by some other oem are not eligible for any purchase preference. in respect of bidfor services, the bidder must be the service provider of the offered service. relevant documentary evidence inthis regard shall be uploaded along with the bid in respect of the offered product or service and buyer will decideeligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 isnot an mse and mse seller s has / have quoted price within l-1+ 15% selected by buyer of margin ofpurchase preference /price band defined in relevant policy, such mse seller shall be given opportunity to matchl-1 price and contract will be awarded for 25% selected by buyer percentage of total quantity. the buyers areadvised to refer the om no. f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 forcompliance of concurrent application of public procurement policy for micro and small enterprises order, 2012and public procurement preference to make in india order, 2017. benefits of mse will be allowed only if seller isvalidated on-line in gem profile as well as validated and approved by buyer after evaluation of documentssubmitted. 3. estimated bid value indicated above is being declared solely for the purpose of guidance on emd amount andfor determining the eligibility criteria related to turn over, past performance and project / past experience etc.this has no relevance or bearing on the price to be quoted by the bidders and is also not going to have anyimpact on bid participation. also this is not going to be used as a criteria in determining reasonableness ofquoted prices which would be determined by the buyer based on its own assessment of reasonableness andbased on competitive prices received in bid / ra process. s s s s / evaluation method item wise evaluation method contract will be awarded schedulewise and the determination of l1 will be done separately for each schedule.the details of item-consignee combination covered under each schedule are as under:3 / 15 s /evaluation schedules s /estimated value & / / item/category /quantityschedule 1208000office chair v332schedule 2800000steel shelving cabinets adjustable typeconfirming to is 3312 v432schedule 3768000metal beds v364office chair v3 32 pieces 5 5 1 2 & & % % % % ^ ^ < < % % 4 4 b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively u u /technical specifications u / as per gem category speci cation /speci cation u u /specificationname b b s s /bid requirementallowed valuesgeneralrequirementchair typenon-revolving and non-tilting chair with armrest, non-revolving and non-tilting chair without armrestunderstructurechair understructure typecantilever, legsunderstructure materialerw tube conforming to is : 1161 latest, aluminiumpipe hollow section conforming to is: 1285 latest, stainless steel ss 202, stainless steel ss 304, stainless steel ss 316, mild steel, solid woodthe shape of tubularsection of understructureround, square, rectangular, elliptical, nasection sizediameter/sides ofunderstructure19 mm, 22 mm, 25 mm, 30 mm, 19x19 mm, 25x25mm, 30x30 mm, 25x15 mm, 30x12 mm, 30x15 mm, 30x20 mm, 45x19 mm, 35x15 mm, 38x20 mm, naunderstructure wallthickness mm1, 1.2, 1.6, 2, 2.5, 3, na for woodcastoryes, noseatseat materialmoulded pu, pu foam, mesh, caned, hot pressedplywooddensity of pu used in seatkg per cubic meter< 30, >30< 40, >40< 50, >50, nathickness of pu used inseat mm< 30, >30< 40, >40< 50, >50, naminimum seat height fromfloor surface mm< 400, >400< 500, >500width of seat mm< 400, >400< 450, >450depth of seat mm< 400, >400< 450, >450seat upholstery materialmesh fabrics, polyester fabric, leatherette, leatherette with spacer fabric, leather, caned, moulded pu4 / 15 backrestbackrest base framematerialmild steel frame, hot pressed plywood, solid wood, injection moulded plasticbackrest materialmoulded pu, pu foam, mesh, caned, hot pressedplywooddensity of pu used inbackrest kg per cubicmeter< 30, >30< 40, >40< 50, >50, nathickness of pu used inbackrest mm< 30, >30< 40, >40< 50, >50, nawidth of backrest mm< 400, >400< 450, >450backrest height from theseat level> 350< 450, >450< 550, >550backrest upholsterymaterialmesh fabrics, polyester fabric, leatherette, leatherette with spacer fabric, leather, caned, moulded puarmrestarmrest typeoverhanging armrest, continuous armrest, mouldedarmrest continuously fitted with seat and back, moulded t armrest fitted with seat bottom, mouldedarmrest mounted to frame, without armrestarmrest movementadjustable, fixed, without armrestswarrantywarranty period in numberof years1, 2, 3, 4, 5 or higher year /speci cation u u /specificationname b b s s /bid requirementallowed valuesadditional specification parameters - office chair v3 32 pieces specification parameternamebid requirement allowed valuesremarksdetailed specification is included in buyer added bid specific atc. biddersshould submit declaration regarding the compliance of the specification.* bidders offering must also comply with the additional specification parameters mentioned above. //o ; a o ; a /consignees/reporting officer and quantity5. .5. ./s.no. //o ; a o ; a /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1shiju v s695011, sree chitra tirunalinstitute for medical scienceand technology, medicalcollege po, trivandrum3230steel shelving cabinets adjustable type confirming to is 3312 v4 32 pieces 5 / 15 5 5 1 2 & & % % % % ^ ^ < < % % 4 4 b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively u u /technical specifications* u / as per gem category speci cation /speci cation u u /specificationname b b s s /bid requirementallowed valuesstandards andcertificationsgoverning standardconformity to is 3312generictypes of shelving cabinetsdimensions are withoutpedestal heightsmall 1150 mm x 760 mm x 430 mm, large 1855mm x 910 mm x 480 mmavailability of drawersyes, noavailability of lockersyes, noadditional specification parameters - steel shelving cabinets adjustable type confirming to is3312 v4 32 pieces specification parameternamebid requirement allowed valuesremarksdetailed specification is included in buyer added bid specific atc. biddersshould submit declaration regarding the compliance of the specification.* bidders offering must also comply with the additional specification parameters mentioned above. //o ; a o ; a /consignees/reporting officer and quantity5. .5. ./s.no. //o ; a o ; a /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1priya p695011, sree chitra tirunalinstitute for medical scienceand technology, medicalcollege po, triavndrum3230metal beds v3 64 pieces 5 5 1 2 & & % % % % ^ ^ < < % % 4 4 b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively u u /technical specifications* u / as per gem category speci cation6 / 15 /speci cation u u /specificationname b b s s /bid requirementallowed valuesgenerictype of metal bedmetal bed, metal bed with headboard only, metal bedwith footboard only, metal bed with headboard andfootboard, metal bed with headboard, footboard andcanopysize category of metal bedsingle, double, queen size, king size, super king sizeoverall length of bed inmm1800 - 1850 mm, 1850 - 1900 mm, 1900 - 1950 mm, 1950 - 2000 mmoverall width of bed inmm750 - 900 mm 2.5 to 3 ft, 900 - 1050 mm 3 to 3.5ft, 1050 - 1200 mm 3.5 to 4 ft, 1200 - 1350 mm 4to 4.5 ft, 1350 - 1500 mm 4.5 to 5 ft, 1500 - 1650mm 5 to 5.4 ft, 1650 - 1800 mm 5.4 to 6 ft, 1800 -1950 mm 6 to 6.4 ft, 1950 - 2100 mm 6.4 to 6.9 ftoverall height of bed frominstallation level in mm150 - 200 mm, 200 - 250 mm, 250 - 300 mm, 300 -350 mm, 350 - 400 mm, 400 - 450 mm, 450 - 500mm, 500 - 550 mm, 550 - 600 mmavailability of headboardyes, noavailability of footboardyes, nometal bed framematerial of bed frameincluding legsmild steel, aluminium, wrought ironmetal bedmattress supportpaneltype of bed mattresssupporthorizontal beams only, vertical beams only, crossbeams - horizontal & vertical combomaterial of bed mattresssupport panelmild steel, aluminium, wrought ironmetal bedheadboardmaterial of bed headboardframemild steel, aluminium, wrought iron, nametal bedfootboardmaterial of bed footboardframemild steel, aluminium, wrought iron, naadditional specification parameters - metal beds v3 64 pieces specification parameternamebid requirement allowed valuesremarksdetailed specification is included in buyer added bid specific atc. biddersshould submit declaration regarding the compliance of the specification.* bidders offering must also comply with the additional specification parameters mentioned above. //o ; a o ; a /consignees/reporting officer and quantity7 / 15 . .5. ./s.no. //o ; a o ; a /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1shiju v s695011, sree chitra tirunalinstitute for medical scienceand technology, medicalcollege po, trivandrum6430special terms and conditions-version:1 effective from 25-06-2024 for category office chair v31. special terms and conditions1. the colours for the seat and back, are speci ed based on the procurement done by various buyerson gem. 2. sellers are advised to refrain from uploading any catalogue selecting image colour other than theoption chosen for the catalogue, as available in the category. any mismanagement of this will betreated seriously as per gem policies.3. in case buyer requires to buy any other colour not covered in the category, same may be speci edunder additional parameters while creating the bid. the colours mentioned in the additionalparameters by the buyer in the bid shall prevail over the colours indicated in the catalogue.4. sellers are advised to check the complete bid document while offering their prices.5 5 : : d d/buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period theadditional time shall commence from the last date of extended delivery period. the additional deliverytime shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the originaldelivery period while exercising the option clause. bidders must comply with these terms.2. genericbidder financial standing: the bidder should not be under liquidation, court receivership or similarproceedings, should not be bankrupt. bidder to upload undertaking to this effect with bid.3. genericbidders shall quote only those products part of service delivery in the bid which are not obsolete in themarket and has at least 7 years residual market life i.e. the offered product shall not be declared end-of-life by the oem before this period.4. certificatesbidders offer is liable to be rejected if they dont upload any of the certificates / documents sought in thebid document, atc and corrigendum if any.5. genericbidders are advised to check applicable gst on their own before quoting. buyer will not take any8 / 15 responsibility in this regards. gst reimbursement will be as per actuals or as per applicable rateswhichever is lower, subject to the maximum of quoted gst %.6. buyer added bid specific atcbuyer added text based atc clausesa. bidders are advised to quote prices as per technical specification and additional specification. bidders should not include price bid in the technical bid. the price format to be submitted along with financial bid only. if any of the price components disclosed in the technical bid, the bid will summarily be rejected and thebidder will be disqualified from further bidding process.b. bidders should submit the manufacturers authorization in attached format- a buyer uploaded atc documentc. liquidated damages:if the supplier fails to deliver or install/commission any or all the goods or fails to perform the services within the time frames incorporated in the purchase order, the purchaser shall, without prejudice to other rights and remedies available to the purchaser under the contract, deduct from the contract price, asliquidated damages, a sum equivalent to 0.5% per week of delay or part thereof on delayed supply of goods, installation, commissioning and/or services until actual delivery or performance subject to a maximum of 10 % of the contract price. once the maximum is reached purchaser may consider termination of the contract.if any delay by the supplier is maintained its contractual obligations towards delivery of goods andperformance of services shall render the supplier liable to any or all of the following sanctions:a. imposition of liquidated damages, b. forfeiture of its performance security andc. termination of the contract for defaultd. sctimst reserves the right to ask for a free demonstration of the quoted equipment/ items after giving reasonable time to the bidder at a pre-determined place acceptable to the purchaser or at a site in case of non-portable and heavy equipment for evaluating the technical compatibility as per the bidding documentspeci cations, professionalism and quality of work of the bidder for technically qualifying for opening the price bid. sctimst reserves the right to accept/ reject the bid based on the product/ site evaluation as stated above.1 2 door storage cupboards. indent no: 1 qty 32 supply & installation of 2 door cupboards the storage size should be 900w x 507d x 1950ht +/-1 mm. storage should be completely knock down construction. storage skirting should be removableand to cover integral legs and legs should be fitted with screw type leveller. storage should be made from combination of crca 0.8 mm & 0.6 mm thickness. storage door should be provided with steel hinge door. door lock should be 3-way 90 degree removable key type cam lock &locking mechanism and handle should be base aesthetically appealing, ergonomic, flush with door made from zinc alloy.9 / 15 one locker should be placed in the rh side of the storage with hinge door and 2-way cam lock with knob type handle top side full shelf should be fixed and adjustable half shelves 1 no on rh side of the storage & 2 no s on lh side of vertical partition. one number hanging rod should be provided on left half of partition below top shelf & another one on right half below locker both mounted on snap-ontype plastic brackets. storage nish should be epoxy powder coated to the thickness of 50 microns +/-10. product should be certified by bifma, greenguard, greenpro, aiota, and iaq2 cantilever chair. indent no.3 qty 32 supply &installation of non revolving chair the chair seat should be made of injection moulded in glass lled polypropylene compound which is upholstered with fabric upholstery covers and moulded polyurethane foam. the chair back should be injection moulded in glass lled polypropylene compound which is upholstered with mesh fabric seat size should be: 50 cm. d x48 cm. w back size should be: 53 cm. w x 39 cm. d the foam should be high-resilience polyurethane moulded with density 45+/-2 kg/m and hardness 16+/-2 kgf as per is: 7888 for 25% compression. chair under structure should be cantilever with powder coateddft 50 10 microns welded tubular main frame is made from 2.54 0.03 cm x 0.2 0.016cm and 1.9 0.3mm x 0.12 0.0096 cm with mild steel electric resistance welding tube. the armrest should be made of glass filled polypropylene compound andassembled over the tubular frame the chair shoes should be made of glass lled polypropylene compound with and pressed fitted with tubular frame. felt is provided below the shoes. 10 / 15 3 single bed with head and footboard. indent no.4 qty 64 supply & installation of single size metal bed. the bed size should be 2080w x 925d x 385 ht +/-1 mm. bed should be completely knock down construction with metal frame material. metal frame size should be mild steel pipe 25.4x 50.8 x 1.2 thk, mild steel pipe 19.05x 19.05 x 0.8 thk and angle 20x20x1.6 thk +/-0.1mm. bed should be provided with headboard & footboard bed nish should be epoxy powder coated to the thickness of 50 microns +/-10. product should be certi ed by bifma, green guard, green pro, aiota, and iaq additional terms and conditions1 the bidder participating in the tender should be an oem or an authorized dealer. upload manufacturer authorization: wherever authorized distributors are submitting the bid, manufacturers authorization form maf/certi cate withoem details shall also be uploaded.2 splitting up of bid items is not possible. bidder shall quote for all products mentioned in the bill of quantity. bidders o er is liable to be rejected if theydo not quote for all products mentioned in bill of quantity boq.3 bidder should upload speci cation and catalogues of the quoted products. bidder should provide the available colour options for the o ered chairs, lpsc reserves the right to choose the colours from the available options for the above items and the same will be mentioned in the p.o. 4 service escalation matrix of the bidder should be provided with o ce set up and warehouse details in kerala. registration certi cate also to be submitted as documentary evidence.5 the supplied products should be designed and tested as per bifma standards for comfort, safety, and durability.6 the bidder/oem should have manufacturing facility in india and they shall manufacture in accordance with iso 9001:2015, 14001:2015, 45001:2018 and 500o1:2018follow safety norms in accordance of ohsas7 the bidder/ oem should have green guard, aiota, iaq, green pro and griha certi cation for the o ered furniture which are in accordance with environment requirements and recognized under ministry of new and renewable energy.11 / 15 the bidder / oem themselves or through resellers, should have executed project for supply and installation / commissioning of same or

Related Searched Keywords : ms pipe line

List of ms-pipe-line Tenders

Tender for replacement of 900mm dia ms pipe line at jessore rd satgachi moreback side of pay and use toilet in ward no.- 22. wbmad/ulb/sddm/nit268/7/25sl9

Tender for nctps isemii circle ahp dn unit i eco hopper renewal of existing eroded and damaged ash slurry disposal ms pipe line with cast basalt pipes and fittings in unit i during available shutdown

Tender for providing, supplying and installation of pumping system along with laying of ms pipe line for pump suction, delivery and bypass arrangement including all accessories at cerc flume, cwprs, khadakwasla pune-24

Tender for gem bids for nit9invertetypesplit, supply of 1.5 tr inverter type sac, dismantling of sac, itc of sac, supplying and fixing extra copper pipe line, supplying and laying copper cable, supplying and fixing ofpowder coated ms frame stand, supplying and fixing of 20mm dia heavy duty pvc pipe

Get ms pipe line Tender Alert...

Related Searched Keywords : ms pipe line

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us