Filters

List of ms-shutter Tenders

List of latest ms-shutter Tenders in Indian Tenders. Click on any ms-shutter Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for ms-shutter Tenders.

All-Tenders (14)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :34930168 | 13 Aug, 2025

Tender Value : 0

Pithoragarah - Uttaranchal

Tender for gem bids for cement in polythene bags 50 kgs each 43 opc , sand coarse , stone aggregate 40 mm graded , crushed stone aggregate 20mm graded , rr stone , hard core of broken stone aggregate of size 45 to 63 mm , tmt bar fe 550 grade 10mm dia and is 1786 to 1985 , non skid ceramic tiles of size 300 x 300 and 8 mm thick , quick setting compound , cement white , main column made by using square hollow steel sections of size 100 x 100 x 4 mm and 3000 mm long , trusses shall be provided using rhs steel section of size 80 mm x 40 mm x 4 mm and 4500 mm long , main purlins shall be made using rectangular hollow steel section of 80 x 40 x 4mm, 3000 mm long , end purlins shall be made using rectangular hollow steel section of 80 x 40 x 4mm and 250 mm long , both side bracings shall be made using rectangular hollow steel section of size 60 x 40 x 3mm and 2940 mm long , gable side bracing shall be made using rectangular hollow steel section of size 60 x 40 x 3mm and 4540 mm long , wall the walls to be made up of puf panels pir panels polyisocyanurate panels , roof 0 point 60 mm thick pre painted galvalume in approved colour sheet fixed with self tapping screws over steel purlins , wind ties of 40 x 5mm ms flat on each side of roof will be provided and shall be secured adequately to purlins with self tapping screws and steel and bitumen washers and bolts , ridge cover 0 point 60 mm thick pre coated corrugated sheet of approved colour matching with the roof sheet of size and design and 3m long , the false ceiling will be made up of 50mm thick continuous line manufactured hybrid core insulated fireproof sandwich ceiling panels in min 1000mm width , pvc door with frame d 915 mm x 2100 mm factory made pvc moulded door shutter 30mm thick , pvc door with frame d1 750 mm x 1800 mm factory made pvc moulded door shutter 30mm thick , ventilators will be 600 x 450 mm with powder coated aluminium frame , sun shade a sun shades 900 x 300 mm for ventilators , sun shade b sun shades 1215 x 550 mm for main doors , self tapping screw 4 inch , self tapping screw 3 inch , rivet full size , nut bolt of size 12mm dia 75mm long with washer , nut bolt of size 12mm dia 125mm long with washer , nut bolt of size 12mm dia 150mm long with washer , 20w led tube light fiting with electronic ballasts and bipin holder and connector and block and etc complete with all accessories , bulk head fitting with 8w short body cfl , modular pvc square box 4 x 4 inch , angle holder , led bulb 15 watt , mcb box 2 way spn , mcb 10 to 32 amp sp , modular switch socket combine 5 oblique 15 amp , star screw full thread 25mm each packet 100 , change over switch 32 amp , tape insulation one and half x 15 mtr with isi mark , wire single core copper conductor 1 point 5 sqmm , elect wire two core copper conductor 6 sqmm , modular switch piano and flush type 5 amp , modular pvc switch board 6x4 inch , ceiling rose , pvc casing and capping of size 25mm , pvc casing and capping of size 25 mm tee , pvc casing and capping of size 25 mm elbow , pvc casing and capping of size 25 mm common for joints , flexible pipe 25mm , lightening conductor made of copper tube 1500mm long x 25mm dia with five copper prongs of length 150mm each fixed to copper ball of dia 50mm and 4mm thick with securing arrangement , solar street light 25w including pole having length 5 mtr long and 75mm dia and complete accessories warranty for street lighting system including battery min 2 years , vitreous china squatting pan iwc orissa pattern and size 680 x 470 mm white with integral foot rests and complete fixing arrangement including vitreous china valveless , vitreous china wash hand basin pedestal type angle back white and flat back and pedestal pype size 580 mm x 450 mm including bracket and pvc connections and waste pipe and 15mm bore cp pillar taps , vitreous china bowl urinal flat back size of 465 mm x 355 mm x265mm white including bracket and waste pipe and urinal spreader with pvc connections and connection pipe , p trap 100mm dia for wc of isi mark , pvc pipe 110 mm dia , pvc y oblique t junction 110mm dia , pvc socket 110 mm dia , pvc swr bend plain 110mm dia , ppr pipe pn 16 oblique sdr 7 point 4 and 3 layer 20mm , ppr pipe pn 16 oblique sdr 7point 4 and 3 layer 32 mm dia , ppr reducer 32 x 20mm outer dia , ppr reducer tee 32 x 20mm outer , ppr union 32mm dia , ppr socket 32mm dia , ppr tee 32mm outer , ppr elbow 32mm isi mark , ppr end cap 32mm dia , ppr socket 20mm dia , ppr elbow 20mm , ppr t 20mm outer dia , pvc floor trap 3 inch dia , pvc pipe 3 inch dia , pvc elbow 75mm dia , pvc t 75mm dia , ppr tank connector inner dia 32mm , ppr gate valve 32mm outer dia , bathroom cabinet ptmt cabinet with looking mirror for toiletry items of size 330mm x 140mm x 530mm with arrangements to fix the same with wall , sealing thread , ppr female threaded elbow inner dia 20mm , ppr female threaded socket dia 20mm , ppr female threaded tee inner dia 20mm , pvc connection pipe 2 feet long with 2 brass nut and bolt , pvc door bend 110mm dia outer dia , pvc tee 110mm dia , m seal , pvc gel 100ml each , taplone tape , ppr wall clamp dia 25mm , ppr wall clamp dia 32mm , cp bib cock 15mm bore long body , cp angle valve chromium plated steel 15 mm bore , cp stop valve chromium plated steel 15 mm bore , cp pillar tap 15 mm bore , ss soap dish holder , cp towel rail 24 mm dia and 600 mm long with fixing fixing arrangement , pre fabricated ms angle 65 x 65 x 5mm with cross bracing between all the four sides of ms angle 40x50x5mm staging for frp tank 500ltr as per tech specs and drg attached , hdpe oblique pvc water tank 500 ltrs and triple layer and including float valve and accessories , cgi sheet 3000 x 900mm x 0 point 60mm of isi mark , gi pipe 2400mm long and 50 mm dia and 1 point 5mm thick , field water heating devices hamam field water heating devices 500 ltrs capacity with five nos of sleeves with 1mm thick ms cover , ppr cutter , welding rod , tile cutter blade , steel cutting wheel blade , safety harness belt of suitable size , magnetic adaptor for self screw fittiing , gum boot 1st quality , hand gloves rubber 1st quality , trawal brick 250mm , shovel hand gs 12 feet 1 point 6 kg with fibre handle , phawarh 915mm with wooden handle , measuring tape 5mtr retractable grade ai 16 , cutter machine with iron cutter blade and wood cutter blade , tile cutter machine , drilling machine portable , drill bits 2mm and 3mm and 5mm and 8mm and 10mm , riveting machine with 100 rivets as per isi specification , spirit level , tube level pipe 4mm of 15mtr length , safety rope 30 mtr long , provision of 01 x plumber to be deployed for 01 month to execute the plumbing wks required in the cement in polythene bags 50 kgs, tmt bar fe 550 grade 10mm dia, non skid ceramic tiles, puf panels

Central Government/Public Sector

TRN :34941579 | 29 Jul, 2025

Tender Value : 40.00 Lacs

Visakhapatnam - Andhra Pradesh

Tender for repair to roof sheet rolling shutter valley gutter n ms door at nad v under age br ii

State Government

TRN :34917878 | 04 Aug, 2025

Tender Value : 33.31 Lacs

Kheda - Gujarat

Tender for removing and repairing plaster work, color work, ms cupboard shutter, trimix work, fabrication work and misc civil work at chaklasi and nadiad east sub division

Central Government/Public Sector

TRN :34916316 | 05 Aug, 2025

Tender Value : 35.00 Lacs

Tambaram - Tamil Nadu

Tender for repair maint of wooden pvc and steel joineries cupboards rolling shutters ms gates and certain petty works in madambakkam camp at afs tambaram

Central Government/Public Sector

TRN :34899511 | 12 Aug, 2025

Tender Value : 39.80 Lacs

West Siang - Arunachal Pradesh

Tender for gem bids for furnishing, vip wooden double bed 2 point 16l x 1 point 87w withmatress godrej almirah double door big size woodenbed side table 3 shelves floor lamp with three shlevesfurniture metal waste bucket small hanger for wall long mirror with frame vip blanket double bed normalblanket double bed bed sheet with pillow cover reynolds door curtain and window curtain for bed room vip photoframe sofa set furniture wooden 5 seater centre tablecoffee table wooden furniture lambs with table smartled tv 53 inch rug carpet 5x3 dining table with fourseater chair wooden vip gas stove 2 burner induction pressure cooker 5 ltr pressure cooker 3 ltr non stick frypen ss cookware set 5 ltr all utensil set kitchen rackstand ss top patila all size 5 to 1 ltr serving bouls andplatters and spoon knife set ss round container all size kitchen clothing tea pot okhli set of dishes plates andbowls and cups set of tableware knives and forks andspoons drinking glasses set of 6 mug and tea cups food storage containers small to large for storing staplesand leftover oven toster grill otg 20 ltr juicer mixer waste bin microwave oven 28l dishwasher shink washing machine full automatic 7 kg 5 point 5 kg fullyautomatic dryer machine automatic heavy iron press withstand cloth dryer stand laundry baskets broom andpan mop stand with bucket duster and pocha cloths toilet bowl cleaner brush and plunger and cleaning supplies garbage bags harpic 1 ltr lizol 1 ltr coine 500 ltr white phynile bucket 20l with mug bathroom towel big hand towel toilet paper with stand bathroom mirror corner stand bathing shop cloth washing dish andpowder hand dryer western toilet seat wash besin towel stand soap stand computer and printer binders lined and blank paper pens and pencil and ruler and bid number gem2025b6363769 dated 22-07-2025 bid document1 105 0 0 eraser and pencil crayons and markers, calculators, voltasdeep frezzer, electric kettle 1 ltr, bukhari, curtain doorsize, solar inverter with battery, solar light 200w, 5 kvagenerator, plastic chairs, plastic table, gyser 10 ltr, exhust fan, curtain rod steel, curtain accessories, carpetroll for floor, foot mat 2x3ft, upvc door 6.5x4 ft, upvcdoor 6 x 3 ft, upvc window with mirror 6x4 ft, upvcwindow with mirror 3x3 ft, upvc door frame, upvcwindow frame, wooden safety 10x1x1, pvc panal forcelling, ordinary rock, filling available excavated earthexcluding rock, supplying and filling in plinth with fine sandunder floors including, supplying chemical emulsion insealed containers including delivery, stone soling underfloors including watering, ns ramming consolidating anddressing complete upto 5 km, providing and laying inposition cement concrete of specified grade excluding thecost of centering and shuttering in footings and bases ofcolumns, all work upto floor plinth level, all work fromplinth level upto floor roof level, centering and shutteringincluding strutting propping, centering and shutteringincluding strutting and propping and removal of form, centering and shuttering including strutting, reinforcementof rcc work including straightening, brick work withcommon burnt, providing half brick masonry with bricks ofclass designation, providing and fixing 1 st quality ceramicglazed wall tiles confirming, providing and laying ceramicglazed floor tiles, providing and laying vitrified floor tiles indifferent sizes, 12 mm thk cement plaster on wall, 15 mmcement plaster on the rough side of single or half brick wallof mix 1 ratio 4, 6 mm thick cement plaster to ceiling, providing and applying white cement based putty of avgthickness, white washing with lime to give an even shadefor new work, finishing walls with water proofing cementpaint of approved brand and maufacture and of requiredshade to give an even shade, applying one coat of cementprimer approved brand, providing wood work in frames offor door and windows, providing and fixing isi marked flushdoor shutters conforming t, providing and fixing aluminiumhandles, providing and fixing aluminum hanging floor doorstopper, providing and fixing aluminium tower bolts, providing and fixing ms grills of required pattern in framesof windows, steel work in built up tubular trusses includingcutting, providing and fixing precoated galvanised ironprofile sheets, providing and fixing precoated galvanisedsteel sheet roofing accessories, providing and fixingprecoated galvanised steel sheet roofing accessories zeropoint 50 mm, providing and fixing thermal insulation ofceiling, weight to be carried by head load from manigongto work site, point wiring in pvc conduit with modular typeswitch, circuit sub main wiring in pvc conduit, 2 x 4 sqmm earth wire for power plug, 2 x 6 sq mm 1 x 6 sq mmearth wire, 2x10 sq mm 1x10sq mm earth wire for commonarea db, 4x10 sq mm 2x10sq mm earth wire for db, 4x16sq mm 2x16sq mm earth wire for db, supplying anddrawing following sizes of frls pvc insulated copperconductor3 x 4 sq mm, supplying and drawing followingsizes of frls pvc insulated copper conductor 3 x 6 sq mm, supplying and drawing co axial tv cable rg, s f pvcconduit, s f modular type switch, s f modular type switchsocket, tv antenna socket outlet, supplying and fixingstepped type electronic fan regulator, supplying and fixingfollowing size modules gi box along with modular base, supplying and fixing following size modules gi box alongwith modular base cover plate for modular switches, //bid details2 / 105 supplying and fixing suitable size gi box with modular plateand cover in front on surface or in reces, supplying andfixing suitable size gi box with modular plate and cover infront on surface or in recess including providing and fixing 6pin 15 by 16 and 5by 6 amps, installation testing andcommissioning of ceiling fan including the down rods ofstandard length, installation of exhaust fan upto 450 mmsweep in the existing opening including making the hole tosuit the size of the above fan making good the damagecoonection testing commissioning etc, extra for fixinglouvers shutters complete with frame for a exhaust, supplying and fixing following way single pole and neutral, supplying and fixing following way prewired tp and n mcbdistribution board, supplying and fixing following wayssurface, providing and fixing following rating, supplyingand fixing 5 amps to 32 amps rating, supplying and fixingfollowing rating and double pole having senstivity crrent upto 300 ma, supplying and fixing 20 amps and 240voltsand spn industrial type socket outlet, providing fixing mpoint v danger notice plate of 200 mm x 150 mm, earthingwith g i earth pipe 4 point 5 mtr long, earthing with g iearth plate 600mm x 600 mm x 6 mm thick includingaccessories, earthing with copper earth plate 600mm x 600mm x 3 mm thick including accessories, providing andfixing 25 mm x 5 mm g i earth strip from earth electrode asrequired, providing and fixing 6 swg dia gi wire on surfaceor in recess for loop earthing as required, supplying thefollowing lighting fixtures including lamps at site rate shallinclude all taxes and duties transportation etc complete, 12inch dia 1 phase exhaust fan 1400 rpm, 2x18 watt cfllight fixture as per wipro cat no wcp 36218 sgw or asequivalent, 48 inch dia 1200 sweep ceiling fan, providingand fixing white vitereous china pedestal type water closeteuropean type w c pan with seat as lid10 litre low levelwhite, providing and fixing wash basin with ci brackets15mm brass pillar taps 32mm cp brass waste of standardpattern, providing and fixing flexible pvc waste pipe forsink or wash basin including pvc waste fittings complete 32mm dia, providing and fixing flexible pvc waste pipe forsink or wash basin including pvc waste fittings complete 40mm dia, providing and fixing 600 x 450 mm bevelled edgemirror of superior glass, providing and fixing viterous chinatoilet paper holder, providing and fixing stainless steel a isi304, providing and fixing chlorinate polyvinyl chloride withclamps at 1 point 00 m, providing and fixing chlorinatepolyvinyl chloride cpvc pipes having thermal stability withclamps at 1 point 50 m, providing and fixing chlorinatepolyvinyl chloride cpvcpipes having thermal stability for hotcold water with clamps at 2 point 00 m, providing andfixing chlorinate polyvinyl chloride cpvc pipes havingthermal stability for hot and cold water supply including allcpvc plain and brass threaded, providing and fixing gunmetal gate valve with ci approved quality, providing andfixing unplasticised pvc connection pipe with brass unions, providing and fixing cp brass bib cock of approved qualityconforming, providing and fixing cp brass long nose bibcock of approved quality conforming to is standards andweighing not less than 810 gms, providing and fixing brassstop cock of approved quality 15mm nominal bore, providing and fixing cp brass shower rose with 15 mm inlet100 mm dia, providing and fixing of cp brass health faucetfor ablution with 1 meter long pvc tube, providing andfixing of 32 mm dia cp brass bottle trap with 190 mm longwall connection pipe in place of pvc waste pipe for wash //bid details3 / 105 basin discharge, providing and fixing of 600 mm long c pbrass towel rail complete with cp brass brackets, providingand fixing of 15 mm dia inlet cp brass adjustable showerwith 190 mm long shower arm complete with flange

State Government

TRN :34899847 | 12 Aug, 2025

Tender Value : 0

Neemuch - Madhya Pradesh

Tender for gem bids for video conferencing camera / web camera v2 q2, television tv v2 q2, all in one pc v2 q2, onlineups v2 q2 . . % % 4 4 /mse exemption for years ofexperience and turnoverno& % & % . . % % 4 4 /startup exemption for years ofexperience and turnoverno 5 5 & & /document requiredfrom sellerexperience criteria, bidder turnover, certificate requestedin atc, oem authorization certificate, oem annualturnover, additional doc 1 requested in atcin case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer7 7 9 9 : : ; ; & 9 & 9 < < 9 9 ; ; > >? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?yes documents submitted as part of a clarification orrepresentation during the tender/bid process will also bedisplayed to other participated bidders after log in -- b b c c 5 5 d d / minimum number ofbids required to disable automatic bidextension1 d /bid number: gem/2025/b/6461391; /dated: 22-07-2025 & & / bid document1 / 22 ; 9; 9 d d, , l l -- / / number of days for which bidwould be auto--extended7 n %n % ;5 ;5 ; ; /bid to ra enabledno 4 4 /type of bidtwo packet bid4 4 q q /primary product categoryvideo conferencing camera / web camera v2 r r & t & t /time allowed for technicalclarifications during technical evaluation2 days u u b b v v u u 4 4 / % % < 9 < 9 : : /inspection required byempanelled inspection authority / agenciespre-registered with gemno r r v v /evaluation methodtotal value wise evaluation x & x & /arbitration clauseno /mediation clauseno //bid details /emd detail > /advisory bankstate bank of india /emd amount25000 /epbg detail b /requirednoa. . z % & 4& % & % 4 > n 9 /emd exemption: the bidder seeking emd exemption, must submit the valid supporting documentfor the relevant category as per gem gtc with the bid. under mse category, only manufacturers for goods andservice providers for services are eligible for exemption from emd. traders are excluded from the purview of thispolicy.b. , , \ u < ; / emd & performance securityshould bein favour of beneficiary, wherever it is applicable. \ \ /beneficiary : collector and sacretory district e-governance societycollector neemuch, general administration department madhya pradesh, n/a, collector neemuch /splitting2 / 22 ; / bid splitting not applied. /mse purchase preference /mse purchase preferenceno /mii purchase preference /mii purchase preferenceno1. estimated bid value indicated above is being declared solely for the purpose of guidance on emd amount andfor determining the eligibility criteria related to turn over, past performance and project / past experience etc.this has no relevance or bearing on the price to be quoted by the bidders and is also not going to have anyimpact on bid participation. also this is not going to be used as a criteria in determining reasonableness ofquoted prices which would be determined by the buyer based on its own assessment of reasonableness andbased on competitive prices received in bid / ra process. video conferencing camera / web camera v2 3 pieces bis requiredyes t t /technical specifications t / as per gem category speci cation /speci cation t t /specificationname b b r r /bid requirementallowed valuesdescription/applicationintended applicationa video conferencing camera are digital cameraspecially designed for use in video conferencingapplication.genric descriptionvideo conferencing cameragenricptz functionyes e-ptz only, yes high precision motorized-ptzor higherresolution maximum eachcamera4k hd 3840 x 2160 pixel or higherpan range minimum0pan range maximum0tilt range minimum0tilt range maximum0zoom range opticalmaximum2x, 3x, 4x, 5x, 10x, 12x, 16x, 20x, 22x, 30x, na orhigherzoom range digital maximummore than 3x - 6x, more than 6x - 9x, more than 9x -12x, 12x - 16x or higherfield of view degreemore than 105-1203 / 22 maximum frame ratesframesper second supported30, 50, 60 or highernumber of mics2control / image processing /focusing featuresnaconnectivityconnectivity outputusb uvc, uacfeature/accessoriessalient featurescmos sensoroptional features/accessoriesnaoperatingconditionsminimum operatingtemperature degree c-10, -5, 0 or lowermaximum operatingtemperature degree c40, 45, 50, 60, 70 or higherrelative humidity noncondensing at 40 deg c %rh80 or loweringress protectionip21, ip20, na or higherwarranty / servicecomprehensive on sitewarranty year5 or highertime duration for repairing/replace the defect duringwarrantywithin two weeksupply of compatible driversand software includedyesbuyer specificrequirementsonline meeting platformsupported application, softwaremicrosoft teams, zoom, cisco webex, google meetcertification / testreporttype of lab which carried outtest of complete product toprove the conformity of productas per governing specificationcertificate of govt.lab/nabl/ilac accredited.agree to provide all relavantdocuments testreport/suuporting document/reports etc to the buyer at thetime of bidding or on demandyes /speci cation t t /specificationname b b r r /bid requirementallowed valuesadditional specification parameters - video conferencing camera / web camera v2 3 pieces specification parameternamebid requirement allowed values4 / 22 package 2 supported audio&video, 3 supported operatingsystem 4 camera1 it should be all-in-one video bar with integrated microphones, speakers, 4k camera with privacy shutter, 2 it should support audio andvideo over the usb, 3 it should support latest windows os and macos 4 integrated uhd 4k 2160 p or higher capture resolution, 90 - 120-degreefov or better, 5x digital zoom or better, group framing, automaticspeaker tracking preferable to have additional ai based features5microphone, 6 speaker5 inbuilt beam array 4-6 or more microphones to capture sound. it shouldsupport full-duplex conversations, acoustic echo cancellation andbackground noise suppression. microphone pickup range should be 15 ft ormore, 100 hz - 15 khz frequency response or better bidder needs to supplywired one external expansion microphone from same oem with accessories.6 inbuilt stereo speakers, output shall be 90 db or better7 other interfaces 8 audiofeatures7 min. 1 x usb 3.0 type c, audio-in/line-in port wi-fi wireless networking formanageability and to connect with byom wireless dongle optional. 8 itshould be possible to pair a mobile phone over bluetooth & use all in onevideo bar as the speaker and microphone for the mobile phone. built-inbluetooth 4.2 or better9 video features 10 cable 11drivers9 when two or more people in the same room talk back and forth, systemshall treat them as if they are in a conversation. if the two speakers arentclose, the usb video bar displays a split screen showing the two peakersoptional. 10 minimum 5 m cable to be supplied to connect the aio withthe usb video bar from same oem 11 smart-camera experiences are builtin - no drivers or software needed plug and play support12 cloud platform certification, 13warranty, 14all requiredspecification12 device should be certified with zoom rooms, microsoft teams, googlemeet etc. cloud platform. bidder compliance certificate for at least twocloud-based platform should be provided. 13 the complete solution shouldbe from the same oem with a 5-year warranty from day one. the productshould bis/ul, ce, fcc, rohs certified. 14 all required specification as perscope of workspecification parameternamebid requirement allowed values* bidders offering must also comply with the additional specification parameters mentioned above. //n ; ^ n ; ^ /consignees/reporting officer and quantity5. .5. ./s.no. //n ; ^ n ; ^ /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1vc setup for mlaoffice/home indistrict neemuch 3ac, vc setup for mla office/homein district neemuch 3 ac345television tv v2 3 set bis requiredyes t t /technical specifications* t / as per gem category speci cation5 / 22 /speci cation t t /specificationname b b r r /bid requirementallowed valuesgenericdescriptiona television set or television receiver morecommonly known as tv is an electronic device forthe purpose of receiving of broadcast of video &audio content as per applicable tv broadcast systemlike ntsc/ pal etc. it enable the user to viewing andhearing programs and news etc as broadcasted /television broadcasts and may have additionalcapabilites to view other infomative programs overinternet.intended applicationto receive and play tv broadcast programs. it isdifferent from monitor which is used as output devicein it systems.type/category/class of tvsetsmart tv2display type/technologyled light emitting diode, oled organic light-emitting diode, qled quantum dot led or highernominal screen size rangeinchesmore than 38 inch - upto 46 inchaudio power minimum10w x 2, 12w x 2, 20w x 2 or higherperformance &featuresmaximum resolutionpixels supported4k ultra hd uhd: 3840x2160, 8k ultra hd:7680x4320 or higherstatic contrast ratio1200 : 1, 1300 : 1, 1400 : 1, 1500 : 1, 1600 : 1, 1700 :1, 1800 : 1, 1900 : 1, 2000 : 1, 2500 : 1, 3000 : 1, 3500 : 1, 4000 : 1, 4500 : 1, 5000 : 1 or highertypical brightness nits300 - 399, 400 - 499, 500 -699, 700-999 or highersalient featureinbuilt speakers, table mountlegs, wall mountbracketoptional featurebuilt-in set-top box, hdr high dynamic range, screen mirroring, built-in wi-fi, wi-fi direct, bluetooth, lanpowerinput power rated voltage230 +-10%, 50hzbee star rating1 star, 2 star, 3 star, 4 star, 5 star or higherrf input &connectivity portsinput portrf input, 1-hdmi port, 1-usb port, 1-vga port, 1-ethernet portaccessoriesaccessories included in thescope of supplyremote control, wall mounting bracket, standoptional accessoriesconnecting cables hdmi, nawarranty, installationcommissioningcomprehensive standardwarrantyyears1 or higherwarranty on display onlyyears3 or highercertification / testreporttype of lab which carried outtest of complete product toprove the conformity of productas per governing specificationcertificate of govt.lab/nabl/ilac accredited6 / 22 agree to provide all relavantdocuments testreport/suuporting document/reports etc to the buyer at thetime of bidding or on demandyes /speci cation t t /specificationname b b r r /bid requirementallowed valuesadditional specification parameters - television tv v2 3 set specification parameternamebid requirement allowed values1 display size, 2 viewingangle, 3 response time, 4input ports, 5output ports1 43 inches or above, 2 178178, 3 9 ms or better, 4 hdmi-3, usb 2.0-1, rj45-1, 5 digital audio out, headphone out6 special features, 7accessories6 smart share/screen share, snmp support to take control of display, wake on lan, built in quad core media player, 7 table stand/wall mount, remote and standard cables8 power supply, 9 powertype, 10 power consumption, 11 certificates8power supply, 9built-in power, 10 120w or less, 11 bis, ul, iso 9001, iso 14001, iso 45001:201812 warranty, 13 operatingsystem, 14 service12 5 years on site, 13 web os/android/taizen with latest os release, 14oem should have registered direct service center in mp to manageservice at district level with toll free number & manufacturing setup in india.15 hdmi cable/ other, 16 allrequired specification15 additional hdmi /other cable to conenct above with aio lengthminimum 10 mtr capable to transfer audio and video both, 16 all requiredspecification as per scope of work bidders offering must also comply with the additional specification parameters mentioned above. //n ; ^ n ; ^ /consignees/reporting officer and quantity5. .5. ./s.no. //n ; ^ n ; ^ /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1vc setup for mlaoffice/home indistrict neemuch 3ac, vc setup for mla office/homein district neemuch 3 ac345all in one pc v2 3 pieces bis requiredyes t t /technical specifications* t / as per gem category speci cation7 / 22 /speci cation t t /specificationname b b r r /bid requirementallowed valuesdescriptiondescription of storeall in one personal computers consist of a mouse, keyboard, display with web camera, inbuilt/integrated microphone array and speakers, aninternal cpu with connection cables and poweradapter with 1 year standard warrantyprocessor numberintel core i5-13500t, intel core i5-14500t, intel corei5-14400, intel core i5-13600t, intel core i7-13700t, intel core i9 12900t, intel core i7-12700, intel corei7-14700t, intel core i5-13500, intel core i5-14500, intel core i9-12900, intel core i7-13700, intel core i7-14700, intel core i9-13900t, intel core i9-13900 orhigherinput devicesmouse connectivitywired, wireless or higherkeyboard connectivitywired, wireless or highertype of keyboardstandard, bilingual or highergraphicsgraphics typeintegratedoperating systemoperating system factorypreloaded withcertificationwindows 11 professionalmemorytype of ramddr4, ddr5 or higherram size gb16storagetype of storage installedwith the systemnvme ssdstorage capacity in gb1024displaydisplay size - diagonal ininches58.1 - 63 22.87 - 24.8panel technologyin plane switching ips or higherportsnumber of ports1-hdmi, 1-dp, universal audio jack, 1- rj-4510/100/1000 ethernet port, 1-usb 3.1 gen 2 type a, 2-usb 3.1 gen 2 type a, 2-usb 3.1 gen 1 type a, 1-usb 3.1 gen 1 type cgenericstandheight adjustableadditional specification parameters - all in one pc v2 3 pieces specification parameternamebid requirement allowed valuesdisplay resolution, displaysizedisplay resolution - min. 1920 x 1080, display size - 23 inch or higherspeaker, connectivityspeaker - dual 2 w speakers or more, connectivity - bluetooth, wi-fi andethernet8 / 22 number of usb 2.0 ports, mouse and keyboardusb 2.0 ports - min. 03, mouse and keyboard - wirelessanti-virus, oem warrantyanti-virus - required with 05-year license, oem warranty - 5 years on siteadditional feature, all requiredspecificationadditional feature - provision to connect hdmi smart tv for audio/video, allrequired specification as per scope of workspecification parameternamebid requirement allowed values* bidders offering must also comply with the additional specification parameters mentioned above. //n ; ^ n ; ^ /consignees/reporting officer and quantity5. .5. ./s.no. //n ; ^ n ; ^ /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1vc setup for mlaoffice/home indistrict neemuch 3ac, vc setup for mla office/homein district neemuch 3 ac345online ups v2 3 pieces t t /technical specifications* t / as per gem category speci cation /speci cation t t /specificationname b b r r /bid requirementallowed valuesgenericrating in kva1.0 kvaswitching technologyigbt-pwminput voltageac single phase 160v - 260v 50hzoutput voltageac single phase 230v +/-1% 50 hzwarranty for ups years3, 4, 5 or higherbattery/backupbankbattery/backup bankprovided with online ups hint: in case the ups issupplied with battery, seller shall ensurecompliance to the gstrates as perrecommendations made inthe 45th meeting of gstcouncil dated 17th sep2021 with batterytype of battery hint: na incase battery not providedsmf-vrla conforming to jisc:8702pt.i, ii&iii, stationary lead acid batteries with tubular positiveplates in monobloc container conforming tois:13369:1992 latest9 / 22 backup time minuteshint: na in case batterynot provided30 minutesminimum guaranteed vah1600 x per kva x per hour of backup timewarranty for batteryyears by batterymanufucaturer/brand hint:na in case battery notprovided3 or higheraccessories with batterynainstallation andcommissioning orserviceinstallation and commissioning covered in the scope ofsupplyprovidedafter sales service turnaround timewithin 48 hours, within 7 dayspreventive maintenance hint:mention timeline if provided, na if not providedmonthly, bi-monthly, quarterly, half yearly, yearly, naor higherother services providedpan india service support on 24 x 7 basisperformance /functionalinbuilt isolation transformerwithoutoverall efficiency %>/ 80% & <90% with inbuilt isolation transformeroverload limit20% overload for minimum 10 minute, 20% overloadfor minimum 5 minute, 50% overload for minimum 1minute, 50% overload for minimum 3 secondstotal harmonic distortionthd%2% maximum @ 100% linear loadother functional featurescrest factor on full non-linear load is not less than 3:1accessoriesaccessoriescabling 6 meters input upto 3m and output upto3m, rack for batteriessalient featuresprotectionprotection for under voltage at battery terminal, protection of over voltagemeteringinput voltage, output voltage, input current, outputcurrentalarms and indicationsindicator for mains presence, indicator for batterycharging and dischargingadditional featurespure sinewave ac outputdesign /constructiontype of design /constructionfloor standingenclosure mm1.2 mm minimum thickness of m.s. sheet duly powdercoateddegree of protectionip21, ip20 or higherother constructional featuresbattery on/off mcb, mains on/off mcb /speci cation t t /specificationname b b r r /bid requirementallowed values10 / 22 operatingconditionsminimum operatingtemperature0, -5 or lower degree celsiusmaximum operatingtemperature40, 45, 50 or higher degree celsiusrelative humidity noncondensing at 40 deg c90, 95 or higher percentbuyer specificrequirementenvironmental test reportrequirementsnabattery test reportnaintended applicationsnetwork it equipmentother requirementsrohs compliancereports andcertificationagree to provide all relevantdocuments testreports/supporting document/reports etc to the buyer at thetime of bidding or on demandyesas per meity government ofindia guidelines ups shall havevalid bis crs certifications asapplicableyes for ups rating upto 10kva /speci cation t t /specificationname b b r r /bid requirementallowed valuesadditional specification parameters - online ups v2 3 pieces specification parameternamebid requirement allowed values1 power output wattage, 2ups type, 3 outputwaveform1 min. 700w, 2 online, 3 pure sine wave ac output, manual bypassfacility4battery voltage, 5 batterycapacity, efficiency4 12v/24v dc, 7ah - 18ah, 5 more than or equal to 85%6overload protection 7 allrequired specification6yes, with auto shutdown 7 all required specification as per scope of work* bidders offering must also comply with the additional specification parameters mentioned above. //n ; ^ n ; ^ /consignees/reporting officer and quantity5. .5. ./s.no. //n ; ^ n ; ^ /consigneereporting/officer /address /quantity; ; ; ; /deliverydays11 / 22 vc setup for mlaoffice/home indistrict neemuch 3ac, vc setup for mla office/homein district neemuch 3 ac3455. .5. ./s.no. //n ; ^ n ; ^ /consigneereporting/officer /address /quantity; ; ; ; /deliverydaysbuyer added bid specific additional scope of work5. .5. ./s.no.document titledescriptionn %n % 4 4 /applicable i.r.o. items1specificationdocumentviewspecification documentall in one pc v23the uploaded document only contains buyer specific additional scope of work and / or drawings for the bid items addedwith due approval of buyer s competent authority. buyer has certified that these additional scope and drawings aregeneralized and would not lead to any restrictive bidding.special terms and conditions-version:1 effective from 22-11-2024 for category video conferencingcamera / web camera v21. note to buyers:the central ministries/ departments and other government buyers, as applicable, shall note that thiscategory is covered under scheme - ii compulsory registration scheme of bis bureau of indianstandards.compulsory registration of goods / articles in this category shall conform to is 616: 2017 and shall bearthe standard mark under a license from bureau of indian standards as per scheme-ii of schedule-ii ofbureau of indian standardsconformity assessment regulations, 2018.buyer shall verify and confirm compliance with the applicable bis order during the procurement andfulfilment process.note to sellers:sellers shall offer and supply products conforming to the corresponding indian standard and mandatorilyregistration as per scheme-2 of bis.non-compliance shall result in action as per gem im policy.buyers and sellers may refer to the relevant s.o at https://www.bis.gov.in/product-certification/products-under-compulsory-certification/scheme-ii-registration-scheme/ special terms and conditions-version:2 effective from 16-10-2024 for category television tv v21. note to buyers:the central ministries/ departments and other government buyers, as applicable, shall note that thiscategory is covered under scheme - ii compulsory registration scheme of bis bureau of indianstandards.compulsory registration of goods / articles in this category shall conform to is 616: 2017 and shall bearthe standard mark under a license from the bureau of indian standards as per scheme-ii of schedule-iiof bureau of indian standardsconformity assessment regulations, 2018.12 / 22 buyer shall verify and confirm compliance with the applicable bis order during the procurement andfulfillment process.buyer shall validate and confirm the comprehensive warranty terms and conditions during theprocurement process. note to sellers:sellers shall offer and supply products conforming to the corresponding indian standard and mandatorilyregistration as per scheme-2 of bis.non-compliance shall result in action as per gem im policy.buyers and sellers may refer to the relevant s.o at https://www.bis.gov.in/product-certification/products-under-compulsory-certification/scheme-ii-registration-scheme/ special terms and conditions-version:3 effective from 26-03-2025 for category all in one pc v21. for buyers:1product verificationa unique device serial number shall be provided by the seller at the time ofsupply, which is mentioned on the product. the buyer/consignee shall beable to verify the complete product details, including configuration, throughthe oem website. the buyer/consignee should be able to perform theseverifications without needing to create an account on the oem website.13 / 22 .operating systema. there is no requirement that the oem of the all in one pc should be adevice partner of microsoft and holding a microsoft authorizationform maf from the software provider.b. microsoft os may be sourced directly from microsoft by oems holdingdevice partner status, and those not holding device partner statusmay source from authorized distributors, i.e., ingram/reddington andtheir authorized channel partners.c. buyers may ensure that maf shall not be made a mandatoryrequirement in bids.d. if supplies are made as per brands of oems who are global devicepartners, then the serial number of the machine supplied can be usedto check the details of the product from the website of the oem.e. in the case of local device partners of microsoft, os details such asthe digital key number should be produced with supplies, and thebuyer may verify them from microsoft.f. in case of other oems who are sourcing from authorized distributorsof microsoft, reddington, or ingram, a copy of the invoice whichcontains the relevant serial number of windows os shall besubmitted with supplies, and the buyer/consignee can verify the samefrom the os server website or by telephone, or both.g. in respect of verification of os, the consignee shall take necessarysteps at the time of acceptance. for device partner machines, buyerscan check the all in one pc oem website to verify the os by enteringthe pcs serial number and part code number. for entities that are notdevice partners and source os from distributors networks, they mayverify the serial number through the microsoft website or bytelephone, or both.h. in case the product offered is with a dos or linux operating system, such verification of os shall not be applicable.i. buyer shall request for windows hardware compatibility certificatefor window operating system to ensure the supply hardware iscompatible with windows operating system14 / 22 .requirement of oemlogobuyers are advised to note that incorporating a condition stipulating an oemlogo on the motherboard is restrictive and may not be incorporated into thebids.4.warrantya. the buyer may ensure that as soon as supplies are received, arequest for a warranty certificate is made, along with logging into theoem website/call center to verify the certificate.b. the product in gem marketplace direct purchase & l1 purchasecomes with a minimum standard warranty of one year. in case theseller has standard warranty more than one year, the same may bementioned in the catalogue including in the model name and in suchcase higher warranty offered shall prevail/supersede the minimumone year warranty.15 / 22 .om related to mii, localcontent and meityadvice on modeltechnical specificationsbuyers are requested to refer to various oms pertaining to dpiit and meity, as issued from time to time, while making procurement and follow relevantprovisions as applicable.6.check points duringacceptance of suppliesbefore generating the consignee receipt and acceptance certificate crac, the consignee may inspect the system condition and verify that it complieswith the agreed specifications and configurations. in the case of a largenumber of units to be procured, then the buyer may opt for bidding andaccordingly stipulate conditions regarding installation, inspection byconsignees/inspection agency. consignees who receive the supplies shouldbe vigilant and should complete checking to ensure that there is no scopefor the supply of refurbished products. at the time of receiving supplies, theconsignee may adhere to the following to ensure that any discrepancies insupplies can be flagged, taken into account, and reflected while generatingthe crac: i. packing should be checked properlyii. a warranty certificate from the oem should be insisted upon andchecked.iii. instruction manuals and the os installed should be checked.iv. the machine serial number should also be checked through settingsand can be verified from the oem website. the above points are forguidance, and the buyer/consignee may take steps consideredsuitable by them for checking at the consignee end beforeacceptance of systems.v. an escalation matrix for customer grievance redressal shall beinsisted upon by the buyer from the seller at the time of delivery.16 / 22 .hdd/ssd storageretentionbuyer may add their requirement of retention of securely store all hard diskdrives hdds or solid-state drives ssds used in the all in one pc underatc clause.for sellers:1.oem website link/partno for productverificationthe oem shall share the oem website link with the buyer at the time ofdelivery. the offered model details/configuration should be available ontheir website. a unique device serial number shall also be provided at thetime of supply, which is also mentioned on the product. the buyer/consigneeshall be able to verify the complete product details, including configuration, through the shared oem website link.2.changing or alteringthe configurationseller must refrain from changing or altering the configuration of the factorypre-loaded machine. the machine should be delivered to the consignee inits original, factory-approved configuration.3.warrantythe seller shall furnish a valid warranty certificate/tag from the oem to thepurchaser, guaranteeing the products coverage under the specifiedwarranty terms. the warranty certificate should be verifiable through theoem website/customer care center.4.compliance ofextended producer sresponsibilitywith effect from 1.4.23, as per the e-waste rules 2022, epr registration ismandatory for manufacturing entities. therefore, all oems shall hold validepr registration, and the registration number should be reflected in thecatalog parameter. oems shall ensure compliance with all responsibilities asper epr registration applicable from time to time.5.mandatory / statutoryrequirements asapplicableoems shall have to ensure compliance with the mandatory/statutoryrequirements as per the government of india notifications issued from timeto time for hardware and software components, as applicable.6.operating systemit shall be the responsibility of oems to ensure that supplies are made withgenuine operating systems. special terms and conditions-version:1 effective from 06-07-2022 for category online ups v21. in addition to general terms and conditions of gem, the following special t&c shall be applicable foronline ups version 2.0 with reference to installation and commissioning.sellers responsibility: installation and commissioning shall involve all the interconnections, any cablingbetween power source, switch boards within 3 metre range for input power and connecting output power17 / 22 in the scope of seller. buyers responsibility: buyer will ensure well ventilated/covered site/room having requisite powerpoints/distribution board to provide input power to ups as well as to take out power from ups within 3metre of the location of ups placement.the above is not applicable for the stores supplied without installation and commisioning.note: the above is indicative and any incidental requirement related to above responsibilities shall alsobe considered in the responsibilities of buyer/seller as applicable.5 5 : : a a/buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period theadditional time shall commence from the last date of extended delivery period. the additional deliverytime shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the originaldelivery period while exercising the option clause. bidders must comply with these terms.2. genericdata sheet of the products offered in the bid, are to be uploaded along with the bid documents. buyerscan match and verify the data sheet with the product specifications offered. in case of any unexplainedmismatch of technical parameters, the bid is liable for rejection.3. scope of supplyscope of supply bid price to include all cost components : supply installation testing andcommissioning of goods4. turnoverbidder turn over criteria: the minimum average annual financial turnover of the bidder during the lastthree years, ending on 31st march of the previous financial year, should be as indicated in the biddocument. documentary evidence in the form of certified audited balance sheets of relevant periods or acertificate from the chartered accountant / cost accountant indicating the turnover details for therelevant period shall be uploaded with the bid. in case the date of constitution / incorporation of thebidder is less than 3 year old, the average turnover in respect of the completed financial years after thedate of constitution shall be taken into account for this criteria.5. turnoveroem turn over criteria: the minimum average annual financial turnover of the oem of the offered productduring the last three years, ending on 31st march of the previous financial year, should be as indicated inthe bid document. documentary evidence in the form of certified audited balance sheets of relevantperiods or a certificate from the chartered accountant / cost accountant indicating the turnover details forthe relevant period shall be uploaded with the bid. in case the date of constitution / incorporation of theoem is less than 3 year old, the average turnover in respect of the completed financial years after thedate of constitution shall be taken into account for this criteria. in case of bunch bids, the oem ofcategory related to primary product having highest bid value should meet this criterion.6. certificatesbidders offer is liable to be rejected if they dont upload any of the certificates / documents sought in thebid document, atc and corrigendum if any.18 / 22 . certificatesiso 9001: the bidder or the oem of the offered products must have iso 9001 certification.8. service & supportavailability of service centres: bidder/oem must have a functional service centre in the state of eachconsignees location in case of carry-in warranty. not applicable in case of goods having on-sitewarranty. if service center is not already there at the time of bidding, successful bidder / oem shall haveto establish one within 30 days of award of contract. payment shall be released only after submission ofdocumentary evidence of having functional service centre.9. service & supportdedicated /toll free telephone no. for service support : bidder/oem must have dedicated/toll freetelephone no. for service support.10. service & supportescalation matrix for service support : bidder/oem must provide escalation matrix of telephone numbersfor service support.11. buyer added bid specific atcbuyer added text based atc clauses1. it must be noted that normally all correspondence and transactions will be made only with the parties w hose bid have been accepted and not with anybody else. consortium not allowed in any form.2. bidder has to submit technical compliance on oem letter head.3. the manufacturer of the all in one 4k usb video bar and cloud based platform for video conferencing should have at least five technical support personnel stationed directly in madhya pradesh to ensure prom pt technical assistance. official hr documentation is mandatory.4. the manufacturer of the all in one 4k usb video bar and cloud based platform for video conferencing must establish a direct/authorized service center in madhya pradesh to offer immediate support. valid do cumentation for service center must be provided on the oem letterhead.5. the manufacturer for the all in one 4k usb video bar and cloud based platform for video conferencing must have

Central Government/Public Sector

TRN :34905053 | 12 Aug, 2025

Tender Value : 0

Amravati - Maharashtra

Tender for gem bids for electrical, providing and fixing 2 no 3pin 6 16a multi socket withsafety shutter and 16a switch and 2 nos 3pin 6a multisocket with safety shutter and 6a switch on independent 12module metallic coated surface supplying and erectingintegrated led flood light fitting max 120w ip65 and ik07class having pressure diecast aluminium housing havingsystem lumens output of min 14400 lumens min efficacy of120 supplying and erecting integrated led highbay fitting150w ip65 and ik08 class having die cast aluminiumhousing with polycarbonate diffuser with integrated opticshaving system lumens output of min 1 point wiring forhighbay lights with 3c 25 sqmm fr grade multistrandedcopper armoured cable erected using industrial typepressure patti or equivalent and required accessories as perspecificati secondary wiring for highbay lights with 3c 25sqmm fr grade multistranded copper armoured cableerected using industrial type pressure patti or equivalentand required accessories as per specifi 6a c curve 16a ccurve 20a c curve supplying erecting and markingtpmcb 25a cseries with rated short circuit breakingcapacity icn 10ka in provided distribution board as perspecification no swswr mcb supplying erecting andmarking tpmcb 32a cseries with rated short circuitbreaking capacity icn 10ka in provided distribution board asper specification no swswr mcb supplying erecting andmarking tpmcb 40a cseries with rated short circuitbreaking capacity icn 10ka in provided distribution board asper specification no swswrmcb supplying erecting andmarking fpmcb 40a cseries with rated short circuitbreaking capacity icn 10ka in provided distribution board asper specification no swswrmcb supplying erecting andcommissioning 4 pole rccb 63a electromagnetic type with300 ma sensitivity with earth leakage trip indication bid number gem2025b6481019 dated 22-07-2025 bid document1 34 0 0 complete as per specification no swrccbrccb, supplyingerecting and commissioning 2 pole rccb 40aelectromagnetic type with 100 ma sensitivity with earthleakage trip indication complete as per specification noswrccbrccb, supplying erecting and commissioning 2pole rccb 40a electromagnetic type with 300 masensitivity with earth leakage trip indication complete as perspecification no swrccbrccb, providing and erecting 4pole mccb 415 v 160a rated shortcircuit breaking capacity25 ka ics100 of icu adjustable thermal overload setting andfixed magnetic setting with provided leads, providing anderecting 4 pole mccb 415 v 100a rated shortcircuitbreaking capacity 25 ka ics100 of icu adjustable thermaloverload setting and fixed magnetic setting with providedleads spre, 4 way vtpn sptp og 4p ic mcb db legrandcat no 5077 25 with top and bottom cable end box, 4 wayvtpn sptp og 4p ic mccb db legrand cat no 5077 45 withtop and bottom cable end box, 6 way vtpn sptp og 4p icmccb db with top and bottom cable end box, 8 way vtpnsptp og and 4p ic mccb db with top and bottom cable endbox, 4 way tpn db having sp og and 4p mcb rccb ic withtop and bottom cable end box, supplying and erecting offabricated 3 phase 1 phase plug and socket tpn dbincorporating 63a 4p 100ma rccb as incomer outgoing as32 amp tp mcb 2 no 20 amp spmcb 4 nos duly erectedwith, supplying installation testing and commissioning thefollowing as a single vertical compartment of approx1800mm height as extension to existing panel contractor tosurvey and measure existing pan, shifting of existing 250kvar apfc panel from present location to adjacent roomalong with supply laying and end termination using dcglands of 35 core 240 sq mm al ar cable of 20 meters length, supplying installation testing and commissioning ofproposed main panel of new shed as per sld and providedtechnical specifications, supplying installation testing andcommissioning of power distribution panel as per sld andprovided technical specifications, supplying erecting andterminating fr xlpe insulated galvanised steel formed wirearmoured strip cable 1100 v 35 core 300 sq mm aluminiumconductor complete erected with glands and lugs on wall, supplying erecting and terminating fr xlpe insulatedgalvanised steel formed wire armoured strip cable 1100 v 4core 70 sq mm aluminium conductor complete erected withglands and lugs on wall tr, supplying erecting andterminating fr xlpe insulated galvanised steel formed wirearmoured strip cable 1100 v 4 core 35 sq mm aluminiumconductor complete erected with glands and lugs on wall, supplying erecting and terminating fr xlpe insulatedgalvanised steel formed wire armoured strip cable 1100 v 4core 25 sq mm aluminium conductor complete erected withglands and lugs on wall tru, supplying erecting andterminating fr xlpe insulated galvanised steel formed wirearmoured strip cable 1100 v 4 core 16 sq mm aluminiumconductor, supplying erecting and terminating fr xlpeinsulated galvanised steel formed wire armoured strip cable1100 v 3 core 25 sq mm, 35 core 300 sq mm aluminium, 4core 70 sq mm aluminium, 4 core 35 sq mm aluminium, 4core 25 sq mm aluminium, 4 core 16 sq mm aluminium, providing and erecting hot dipped galvanised ladder typecable tray manufactured from 16 swg 1.6 mm thick gisheet of 300mm width and 75mm height, supplying andfixing ms angle and iron supports for cable trays panels dbsetc including painting as per clients recommendation andfixing on wallroof etc, supplying and laying excluding //bid details2 / 34 excavation reinforced cement concrete pipe of is 4582003np2 class of 200 mm internal diameter in proper line leveland slope including providing and fixing collars i, makingtrench in hard murumtar road having 075 m depth andminimum 03mtr width as per is for laying provided cablesup to voltage level 11kv cable complete as per specificationno cwexnctr, supply of 8 mm aluminum roundconductor complete as specified in drawing and meets therequirements of is iec 62305, supply of roof conductorholder stainless steel conductor holder with bottom sectionand conductor holder stainless steel v2abottom sectionwith 85 mm slot conductor holder 1 meter distance, connector for t cross and parallel connectors quickinstallation using hexagonal bolt m10x30 highgrade hot dipgalvanised conforms to the requirements according to isiec62305 2nosexpansion pie, providing of expansion piecewith connector for equalising temperature related lengthchanges necessary on conductors length over 20 meters, supply of test joint suitable to connect 8mm roundconductor and max by 30x3 mm gi strip as specified indrawing and directed by engineer made, supply ofgalvanised iron flat 40x5 mm thickness for ring earthing asrequired flat conductor, providing of flat conductor holdersuitable for fl 30 installed with 2 hexagonal bolts, providing pipe earthing stations with 100mm dia 3 mtr longci pipe earth with 6mm perforations 20mm cc specified andshown on drawing as per is 3043 complete with excavationdisconnecting link arrang, supplying and erecting 8 swgcu earth conductor earthing or any other purposes on wallwith necessary gi clamps fixed on wallcable conduit withscrews complete, 25 x 5 mm hot dip galvanized earth flatcomplete with all accessories earth strip joint will be eitherfull welding type or else using double nut boltingelectroplated earth flat not allowed

Central Government/Public Sector

TRN :34888719 | 04 Aug, 2025

Tender Value : 1.17 Lacs

Indore - Madhya Pradesh

Tender for repair and reconditioning and painting of ms shutter gates of 250kva room2nos, 160kva room 2nos and sub-station grid room 1 nos at man project jeerabad district dhar

corporations/Associations/Others

TRN :34892319 | 30 Jul, 2025

Tender Value : 0

Udhamsign Nagar - Uttaranchal

Tender for gem bids for enamel, synthetic, exterior a under coating b finishingpaint v3 confirming to is 2932 q3, ready mixed paint, air drying, red oxide zinc chrome, priming v2 as per is2074 q3, thinner for epoxy paints bhel q3 . . % % 4 4 /mse exemption for years ofexperience and turnoverno& % & % . . % % 4 4 /startup exemption for years ofexperience and turnoverno 5 5 & & /document requiredfrom sellerexperience criteria, bidder turnover, certificate requestedin atc, additional doc 1 requested in atc, compliance ofboq specification and supporting documentin case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer7 7 9 9 : : ; ; & 9 & 9 < < 9 9 ; ; > >? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?no -- b b c c 5 5 d d / minimum number ofbids required to disable automatic bidextension1 d /bid number: gem/2025/b/6474788; /dated: 20-07-2025 & & / bid document1 / 29 ; 9; 9 d d, , l l -- / / number of days for which bidwould be auto--extended7 n %n % ;5 ;5 ; ; /bid to ra enabledyesn %n % o o /ra quali cation ruleh1-highest priced bid elimination 4 4 /type of bidtwo packet bid4 4 r r /primary product categoryenamel, synthetic, exterior a under coating b finishingpaint v3 confirming to is 2932 s s & u & u /time allowed for technicalclarifications during technical evaluation2 days v v b b w w v v 4 4 / % % < 9 < 9 : : /inspection required byempanelled inspection authority / agenciespre-registered with gemno s s w w /evaluation methodtotal value wise evaluation y & y & /arbitration clauseno /mediation clauseno //bid details /emd detail > /advisory bankicici /emd amount110000 /epbg detail > /advisory bankicici 4 %/epbg percentage%5.00 b /duration of epbgrequired months.15a. . \ % & 4& % & % 4 > n 9 /emd exemption: the bidder seeking emd exemption, must submit the valid supporting documentfor the relevant category as per gem gtc with the bid. under mse category, only manufacturers for goods andservice providers for services are eligible for exemption from emd. traders are excluded from the purview of thispolicy.b. , , ^ v < ; / emd & performance securityshould bein favour of beneficiary, wherever it is applicable. ^ ^ /beneficiary : 2 / 29 hpclhpcl sitarganj lpg bottling plant plot no 6b, sector 1 iie sitarganj, phase 2, sitarganj udham singhnagar- 262405hindustan petroleum corporation limited /splitting /splitting /splitting appliedyes d, l % l ; / maximum no. ofbidders amongst which order may be split2 n ; 7 ; n ; / split criteria basedon which quantity will be distributedthe job shall be awarded to two parties in the ratio of 70:30for the order of their original ranking subject to match l1rate .in case, no other vendor matches contracted l1 rates, 100% quantity shall to be placed on l1 vendor. /mii purchase preference /mii purchase preferenceno v v 4 4 :/details of the competent authority for mii v 4 /name of competentauthoritymonpg circular v 4 /designation of competentauthoritymonpg circular v 4 % / /4 /o ce /department / division of competent authoritymonpg circular d /ca approval numbermonpg circular v 4 /competent authorityapproval date26-04-2022 v 4 : 4 & lv` /brief description of the approval grantedby competent authoritysmall purchase upto 1 cr is exempted as per monpg circularcompetent authority approval for not opting make in india preference : view document /mse purchase preference /mse purchase preferenceyes1. purchase preference will be given to mses having valid udyam registration and whose credentials arevalidated online through udyam registration portal as defined in public procurement policy for micro and small3 / 29 enterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises andits subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail themselves of thepurchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders areexcluded from the purview of public procurement policy for micro and small enterprises and hence resellersoffering products manufactured by some other oem are not eligible for any purchase preference. in respect of bidfor services, the bidder must be the service provider of the offered service. relevant documentary evidence inthis regard shall be uploaded along with the bid in respect of the offered product or service and buyer will decideeligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 isnot an mse and mse seller s has / have quoted price within l-1+ 15% selected by buyer of margin ofpurchase preference /price band defined in relevant policy, such mse seller shall be given opportunity to matchl-1 price and contract will be awarded for 30% selected by buyer percentage of total quantity. the buyers areadvised to refer the om no. f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 forcompliance of concurrent application of public procurement policy for micro and small enterprises order, 2012and public procurement preference to make in india order, 2017. benefits of mse will be allowed only if seller isvalidated on-line in gem profile as well as validated and approved by buyer after evaluation of documentssubmitted. 2. estimated bid value indicated above is being declared solely for the purpose of guidance on emd amount andfor determining the eligibility criteria related to turn over, past performance and project / past experience etc.this has no relevance or bearing on the price to be quoted by the bidders and is also not going to have anyimpact on bid participation. also this is not going to be used as a criteria in determining reasonableness ofquoted prices which would be determined by the buyer based on its own assessment of reasonableness andbased on competitive prices received in bid / ra process. 3. short duration bid has been published by the buyer with the approval of the competent authority due toemergency procurement of critical products/services. 4. reverse auction would be conducted amongst all the technically qualified bidders except the highest quotingbidder. the technically qualified highest quoting bidder will not be allowed to participate in ra. however, h-1will also be allowed to participate in ra in following cases:i. if number of technically qualified bidders are only 2 or 3.ii. if buyer has chosen to split the bid amongst n sellers, and h1 bid is coming within n.iii. in case primary product of only one oem is left in contention for participation in ra on elimination of h-1.iv. if l-1 is non-mse and h-1 is eligible mse and h-1 price is coming within price band of 15% of non-mse l-1v. if l-1 is non-mii and h-1 is eligible mii and h-1 price is coming within price band of 20% of non-mii l-1enamel, synthetic, exterior a under coating b finishing paint v3 confirming tois 2932 27000 containers bis requiredyes u u /technical specifications u / as per gem category speci cation /speci cation u u /specificationname b b s s /bid requirementallowed valuesstandards &certificationgoverning specificationconforming to is 2932requirement ofenamel, synthetic, exterior paintclassboth brushing and air spraying thinning withpetroleum hydrocarbon solvent please refer to clause4 of is 2932enamel type according tousagefor exterior undercoatingcolour shade of enamelpaint with isc nosignal red 537shelf lifebalance shelf life at the time ofinvoice/ deliveryatleast 50% of shelf life4 / 29 packing & markingpacking materialsteel drums galvanized and ungalvanized as per is2552packing size20 litremarkingas per clause 7.2.1 of is 2932 /speci cation u u /specificationname b b s s /bid requirementallowed values //n ; b n ; b /consignees/reporting officer and quantity5. .5. ./s.no. //n ; b n ; b /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1shailendra pratapsingh262405, hpcl, sitarganj lpgplant, plot no. 6b, sector 1,, iie sitarganj, phase 2, sitarganj, udham singh nagar -262405, uttarakhand27000365ready mixed paint, air drying, red oxide zinc chrome, priming v2 as per is 2074 25000 liter u u /technical specifications* u / as per gem category speci cation /speci cation u u /specificationname b b s s /bid requirementallowed valuesstandards &certificationgoverning standardconformity to is 2074whether bis markedyes or highergeneralrequirementsconsistnecysuitable for brushing as well as sprayinghard dry, drying time maxhour8 hrs for brushing as well as sprayingpacking and markingnet content of eachcontainer/packing type20 liter steel drum as per is 2552test report detailstype of lab which carried outtest of complete product toprove the conformity of productas per specificationnabl accredited lab, manufacturer in-house test5 / 29 //n ; b n ; b /consignees/reporting officer and quantity5. .5. ./s.no. //n ; b n ; b /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1shailendra pratapsingh262405, hpcl, sitarganj lpgplant, plot no. 6b, sector 1,, iie sitarganj, phase 2, sitarganj, udham singh nagar -262405, uttarakhand25000365enamel, synthetic, exterior a under coating b finishing paint v3 confirming tois 2932 1200 containers u u /technical specifications* u / as per gem category speci cation /speci cation u u /specificationname b b s s /bid requirementallowed valuesstandards &certificationgoverning specificationconforming to is 2932requirement ofenamel, synthetic, exterior paintclassbrushingenamel type according tousagefor exterior finishingcolour shade of enamelpaint with isc nowhite //n ; b n ; b /consignees/reporting officer and quantity5. .5. ./s.no. //n ; b n ; b /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1shailendra pratapsingh262405, hpcl, sitarganj lpgplant, plot no. 6b, sector 1,, iie sitarganj, phase 2, sitarganj, udham singh nagar -262405, uttarakhand1200365enamel, synthetic, exterior a under coating b finishing paint v3 confirming tois 2932 2400 containers u u /technical specifications* u / as per gem category speci cation6 / 29 /speci cation u u /specificationname b b s s /bid requirementallowed valuesstandards &certificationgoverning specificationconforming to is 2932requirement ofenamel, synthetic, exterior paintclassboth brushing and air spraying thinning withpetroleum hydrocarbon solvent please refer to clause4 of is 2932enamel type according tousagefor exterior undercoatingcolour shade of enamelpaint with isc nooxford blue 105 //n ; b n ; b /consignees/reporting officer and quantity5. .5. ./s.no. //n ; b n ; b /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1shailendra pratapsingh262405, hpcl, sitarganj lpgplant, plot no. 6b, sector 1,, iie sitarganj, phase 2, sitarganj, udham singh nagar -262405, uttarakhand2400365enamel, synthetic, exterior a under coating b finishing paint v3 confirming tois 2932 1200 containers u u /technical specifications* u / as per gem category speci cation /speci cation u u /specificationname b b s s /bid requirementallowed valuesstandards &certificationgoverning specificationconforming to is 2932requirement ofenamel, synthetic, exterior paintclassbrushingenamel type according tousagefor exterior finishingcolour shade of enamelpaint with isc nogolden yellow 3567 / 29 //n ; b n ; b /consignees/reporting officer and quantity5. .5. ./s.no. //n ; b n ; b /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1shailendra pratapsingh262405, hpcl, sitarganj lpgplant, plot no. 6b, sector 1,, iie sitarganj, phase 2, sitarganj, udham singh nagar -262405, uttarakhand1200365enamel, synthetic, exterior a under coating b finishing paint v3 confirming tois 2932 720 containers u u /technical specifications* u / as per gem category speci cation /speci cation u u /specificationname b b s s /bid requirementallowed valuesstandards &certificationgoverning specificationconforming to is 2932requirement ofenamel, synthetic, exterior paintclassboth brushing and air spraying thinning withpetroleum hydrocarbon solvent please refer to clause4 of is 2932enamel type according tousagefor exterior finishingcolour shade of enamelpaint with isc noblack //n ; b n ; b /consignees/reporting officer and quantity5. .5. ./s.no. //n ; b n ; b /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1shailendra pratapsingh262405, hpcl, sitarganj lpgplant, plot no. 6b, sector 1,, iie sitarganj, phase 2, sitarganj, udham singh nagar -262405, uttarakhand720365thinner for epoxy paints bhel 1200 liter u u /technical specifications* u / as per gem category speci cation8 / 29 /speci cation u u /specificationname b b s s /bid requirementallowed valuesgenerictechnical specifications andrequirement of theproductsas per bhel spec. aa56708 attached n d n d u u & & /additional specification documentsverified and signed tpdocumentview //n ; b n ; b /consignees/reporting officer and quantity5. .5. ./s.no. //n ; b n ; b /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1shailendra pratapsingh262405, hpcl, sitarganj lpgplant, plot no. 6b, sector 1,, iie sitarganj, phase 2, sitarganj, udham singh nagar -262405, uttarakhand1200365special terms and conditions-version:2 effective from 16-01-2025 for category ready mixed paint, air drying, red oxide zinc chrome, priming v2 as per is 20741. this paint is not recommended to be used on household articles such as grills, shutters, metal furniture, lpg cylinder, etc, due to toxicity of chrome primer. it is recommended that proper precaution to be takenduring application.2. the product may also carry an isi mark/standard mark as per the bis standard governing this category.as such buyers may also opt for isi marked product while creating bid. in such cases buyer shall verifyvalid bis license for the same at the time of evaluation of bid and check isi marking at the time of receiptof material before issuing crac. 5 5 : : f f/buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period theadditional time shall commence from the last date of extended delivery period. the additional deliverytime shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the original9 / 29 delivery period while exercising the option clause. bidders must comply with these terms.2. buyer added bid specific atcbuyer added text based atc clauses1 note to vendor :-a vendor has to quote the entire amount including all taxes gst and extras against each items considering all services/supply as detailed in scope of job and tender terms and conditions of bid.b while generating invoice in gem portal, the seller must upload scanned copy of gst invoice andthe screenshot of gst portal confirming payment of gst.c supplier shall ensure that the invoice is raised in the name of consignee with gstin of consignee only.d please ref boq, specification of item, and other documentscope of job, pqc, sla, , payment terms etc for more details as attached in buyer added bid specific atc .e

Central Government/Public Sector

TRN :34882057 | 29 Jul, 2025

Tender Value : 0

Kangra - Himachal Pradesh

Tender for gem bids for earth work excavation by mechanical means hydraulic excavator manual means in foundation trenches or drains , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering , providing and laying in position specified grade of reinforced cement excluding the cost of centering shuttering finishing and reinforced , sand pit wall sand pit wall with filling loose sand filling loose sand , steel reinforced of r c c work , supplying of m s bolts round holding , supplying of m s bolts round holding down of anchor bolts with nuts and washer plates complete , providing and fixing ms plate 5mm thick. , rain shed shhet , designing providing and fixing of polyester resin fiber reinforced 3d 2d panel , providing and fi providing and fixing one set of zigzag stairs to climb the top of tower at 10 mtr heightxing one set of zigzag stairs to climb the top of tower at 10 mtr height , ss fixe imported ss fixe imported chain anchors chain anchors , movable climbing holds providing and fixing wall climbing wall equipment , climbing rope 12mm , harness , screw carabineers , quick draws , belay gloves

Related Searched Keywords : ms shutter

List of ms-shutter Tenders

Tender for repair to roof sheet rolling shutter valley gutter n ms door at nad v under age br ii

Tender for removing and repairing plaster work, color work, ms cupboard shutter, trimix work, fabrication work and misc civil work at chaklasi and nadiad east sub division

Tender for repair maint of wooden pvc and steel joineries cupboards rolling shutters ms gates and certain petty works in madambakkam camp at afs tambaram

Tender for repair and reconditioning and painting of ms shutter gates of 250kva room2nos, 160kva room 2nos and sub-station grid room 1 nos at man project jeerabad district dhar

Get ms shutter Tender Alert...

Related Searched Keywords : ms shutter

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us