Filters

List of ms-strip Tenders

List of latest ms-strip Tenders in Indian Tenders. Click on any ms-strip Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for ms-strip Tenders.

All-Tenders (8)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government / Public Sector

TRN :36251467 | 10 Jan, 2026

Tender Value : 49.60 Lacs

Aligarh - Uttar Pradesh

Tender for gem bids for procurement, spring for self centering hot air sealing gun plumberblock w brg213 65mmconveyor plumber block wbrg212 60mmconveyor ucp 213 bearing ucp 212bearing bearing 6204 bearing 6305 bearing7216 bearing 6313 bearing 32213 bearing 32016 bearing31309 bearing 32212 bearing 30311 bearing 32017 uhmw strip 40mmx10mmx3000mm uhm taper 13by8x32x1550mm uhm taper 13by 8x32x1850mm cvtheads teflon roller for twin arm angle stopper pressurgauge 0-16 kg 6 inch pressur gauge 0-10 kg 6 inch pressure gauge 0-28kg dial 6 inch pressure gauge 0-70kgdial 4 inch pressure gauge 0-16 kg dial 4 inch conveyorchain detachable chain pinchainen-24conveyor ms60 mm bore 32 teeth duplex gear ms 60 mm bore 38teeth duplex gear sprocket 8 teeth with self lub bushbore 40mm 14 teeth conveyor chain sprocket hole dia65mm cast steel grade 1030 as per iocl sample duplexsprocket 65mm x 32 teeth duplex sprocket 65mm x 34teeth duplex sprocket 65mm x 36 teeth duplex sprocket65mm x 30 teeth duplex sprocket 58 mm x 18 teeth duplex sprocket 58mmx 20 teeth duplex sprocket 58 mmx 24 teeth introduction assembly with roller hex nipple05 x 05 inch ci coupling 110 no ci coupling 150 no 1inch pitch duplex chain-1 set of 10 ft length triplexchain 1 inch chain lock duplex ms 25 mtr cchannel for conveyor ms iron sheet 8inch by 4 inch ms angle for conveyor 40mm x 40mm x 6mm of 6 mtreach ms angle for conveyor 50mm x 50mm x 6mm locknut m16x40mm with washer csk bolt 8x15 inch with nutwasher csk bolt 10x15inch with nut washer o ringinserter tool 40 mm bore shaft of 420 mm length 40 mm bore shaft of 400 mm length 40 mm boreshaft of 380 mm length 40 mm bore shaft of 480 bid number gem2025b6918438 dated 23-12-2025 bid document1 67 1 1 mm length, 40 mm bore shaft of 350 mm length, 40mm bore shaft of 460 mm length, shaft for helicalgear 60 mm bore length 840mm key slot as perrequirement material grade en 8 by 9, conveyor shaft withkey -65 mm dia length 810mm by 850mm with step downat one end as per iocl requirement key solt as per ioclrequirement material grade en 8 by 9, alen bolt m6x 25, alen bolt m6x 40, alen bolt m8 x 25, alen bolt m8 x40, supply of crc, supply of antenna valve rod, 0.75 inch inch ball valve class 300, 0.5 inch inch ballvalve heavy duty class 800 threaded, 1inch inch ballvalve heavy duty class 800 threaded, 0.5 inch spiralwound matellic gasket class 300, 0.75 inch matellicgasket class 300, 1inch matellic gasketclass 300, 2inch matellic gasketclass 300, 2.5 matellic gasketclass 300, 3 inch matellic gasket class 300, 4inchmatellic gasket class 300, 6inch matellic gasket class300, 8inch matellic gasket class 300, seal kit gear box78-100-10, seal kit gear box 75-55-09, seal kit gear box55-42-8, seal kit gear box 78-100-13, seal kit gear box45-65-10, seal kit gear box 80-100-10, seal kit gear box60-75-8, seal kit gear box 90-110-12, seal kit gear box58-72-8, seal kit gear box 90-70-10, star 95 mm, star100 mm, star 110 mm, star 150 mm, fastner 12mm x125mm, fastner 16mm x 150mm, 6mm nut bolt taperhead, 10 mm x 32mm nut bolt taper head, 12 mm x 40mm nutwith double washer bolt taper head, boomtyre 3.50.8, tube for boom tyre 3.50.8, earthing brushfor kosan carousel, sealing machine gun, manual hot airsealing gun with pneumatic control, rexroth bearing linearfor ejection kosan, gas stop valve seal kit, gas stop valve, hex nipple 1by 2 x 3by 8 inch, bushing 1by 2 x 3by 8 inch, bushing 1by 4 x 1by 2 inch, welding rod bundle of 5packets of grade e6013 8mm, cutting wheel 5 inch, cutting wheel 4 inch, cutting wheel 14 inch, grindingwheel 4 inch, conveyor section standard 2.5m long, centrally located drive section, y-section, conveyor, pam, hydraulic motor for valve screwmachine, freight

State Government

TRN :36239875 | 12 Jan, 2026

Tender Value : 6.91 Lacs

Palghat - Kerala

Tender for erection of grider power equipment including structure of 33kv bus isolator cb ct la pt bus coupler isolator earthing of this equipment using gi strip and providing riser and auxiliary mat using 25mm ms rod cr panel erection con capacity enhancement of 33kv substation muthalamada by installing additional 5mva 33/11kv transformer-equipment erection, earthing and control cable work

State Government

TRN :36209164 | 07 Jan, 2026

Tender Value : 10.19 Lacs

Surat - Gujarat

Tender for gem bids for hardware, adhesive tube for punchar aluminium oxide grindingwheel 200x25x125mm anti spattle spray for mig welding500ml asbestos gasket l-400 w 300mm thickness -2mm battery jumper wire heavy duty 2000a 12ft boring toolcarbide tip p-30 10x10mm brake cable for splendor plus brake shoe linear splendor plus bracket l ms brassscrew 3 inch brazing flame guard brazing fluxsilver brazing flux copper break shoe return springset brick capillary tube dia1mm carbide tipped tool rhp30 12x12x150mm carburated cleaning kit carburatorfloat with pin carburator packing kit cdi for splendor plus center drill bs-4 centre bit bs-5 cpvc clamp 1inchand 075inch c clip pvc 10mm and 19mm cleaning brush25mm cluth cable for splendor plus cluth plate forsplendor plus cluth pressure plate set for splendor plus coolant engine copper filter drier length 025inch silica cotton sleeve 2mm silver brazing filler rod dia 16mm copper tube outer dia 25mmx 129mm thickness cottonh and h and gloves cpvc elbow and tee and coupling cpvc step over bend 075inch cpvc mabt reducerand brass elbow 075inchx05inch cpvc 05x05 brasstee cpvc 05inch elbow cpvc pipe 075inch sdr113mtr cpvc pipe 075inch cpvc pipe 1inch cpvccement solvent 118ml cutting disc 4inch dead nut05inch and 025inch and 062inch decarbonising spray disposable rubber hand gloves drain or chock uprod set 3 foot drier filter id3mm and od 6mm ducttape t-180 and l-25 emery paper grade 50 emery papergrade 80 emery paper smooth 180 emery paper grit220 emery paper fastner pin male terminal stripconnector 12-22 swg file h and le wooden 4inch flarenut 05inch and 025inch and 062inch flesher bikeindicator fiber glass sheet 10mm transperant bid number gem2025b7023803 dated 23-12-2025 bid document1 112 1 1 8x4ft, fisher bolt nut for wash basin gi, gear boxpacking set, gi bend 0.5inch and 0.75inch and 1inch and1.25inch, gi bush 0.5inchx0.75inch and 0.5inchx1inch and0.75inchx1inch and 1inchx1.25inch, gi barrel nipple0.5inch and 0.75inch and 1inch and 1.25inch, gi cap0.5inch and 0.75inch and 1inch and 1.25inch, gi clamp0.5inch and 0.75inch and 1inch and 1.25inch, gi couplingrigid 0.5inch and 0.75inch and 1inch and 1.25inch, gicoupling flexible 0.5inch and 0.75inch and 1inch and1.25inch, gi coupling with thread 19mm, gi elbow0.5inch and 0.75inch and 1inch and 1.25inch, gi fourwaycross 0.5inch and 0.75inch and 1inch and 1.25inch, gipipe 0.5inch dia, gi pipe 12.7 mm dia, gi pipe 0.5inch and0.75inch and 1inch and 1.25inch, gi pipe 19mm dia, gipipe 38mm dia, gi plug 0.5inch and 0.75inch and 1inchand 1.25inch, gi pipe fitting dia 0.5inch elbow and unionand tee and cross and plug and b, gi reducing coupling38x19mm, gi reducer coupling 0.5inchx0.75inch, 0.5inchx1inch, 0.75inchx1inch, 1inchx1.25inch, gireducer elbow 0.5inchx0.75inch and 0.5inchx1inch and0.75inchx1inch and 1inchx1.25inch, gi reducer tee0.5inchx0.75inch and 0.5inchx1inch and 0.75inchx1inchand 1inchx1.25inch, gi reducer barrel nipple0.5inchx0.75inch and 0.5inchx1inch and 0.75inchx1inchand 1inchx1.25inch, gi sheet 26 gauge and 4x8ft, gi tee0.5inch and 0.75inch and 1inch and 1.25inch, gi union0.5inch and 0.75inch and 1inch and 1.25inch, gi washerfor 40 mm dia, gland packing, glass cleaner 500ml, grinding disc for bencha grinder 150mm, grub screw0.25inch x 1inch, heat insulation silicone workingmat 30x20cm, h.s.s drill bit 4mm, h.s.s drill bit 8mm, h.s.s drill bit 10mm, h.s.s drill bit 12mm, hex nut0.62inch, hss drill bit 1 and 2 and 3 and 4 and 5 and6mm, hss drill bit10 mm, hss drill bit12 mm, hsstool bit 4x4mm, hydraulic oil hp-68, inspectionchamber pvc 2footx2foot, jumper oil, carbide tipped v-shaped lathe cutting tool 12x12x100mm, leatherhand gloves, line filter ss 0.5inch, locking devicespring washer and split pin and wing nut and casetel nutand simonds nut and swan nuts and wire lock nut andpenning nut, mini solid rosin high purity 30gm, machine hacksaw blade 350x25x1.25 mm 10 tpi, machinehacksaw blade 350x25x1.25 mm 14 tpi, mscc filler rod1.6dia, non return valve 0.25inch, nylon hair brush50mm, non return valve 0.5inch and 1inch and 0.75inch, oil paint black, oil paint blue, oil paint red, oil paintyellow, oil paint grey, oil paint green, oil sae 20w 40, oil sae 40 machine oil, lubrication oil 15w40, painthair brush 12mm, paint hair brush 25mm, paint hair brush20mm, paint hair brush 50mm, paint brush 100mm, petroleum jelly, plaster of paris, plywood sheet 6mmthick 8x4 ft, plywood sheet 9mm thick 8x4 ft, plywoodsheet 12mm thick 8x4 ft, plywood sheet800x600x12mm, pneumatic pu tube 6mm inner dia andouter dia-0.23622 inch, pnumatic pu tube 6mm odstraight male thread push fitting dia 0.25inch, pnumatic pu tube 6mm od straight male thread pushfitting dia 0.5inch, pneumatic push type fitting elbowand tee, pnumatic tube push connector 0.25inch, ppr elbow 0.5inch, ppr pipe 0.5inch, ppr tee 0.5inch, pvc insulation tape 15mmx10 mtr, pvc pipe 0.5inch and0.75inch and 1inch and 1.25inch, pvc coupler 0.5inchand 0.75inch and 1inch and 1.25inch, pvc long coupler0.5inch and 0.75inch and 1inch and 1.25inch, pvc elbow //bid details2 / 112 .5inch and 0.75inch and 1inch and 1.25inch, pvc tee0.5inch and 0.75inch and 1inch and 1.25inch, pvc fta0.5inch and 0.75inch and 1inch and 1.25inch, pvcreducer coupler 0.5inchx0.75inch and 0.5inchx1inchand 0.75inchx1inch and 1inchx1.25inch, pvc connectionhose 0.5inchx24inch, pvc elbow 75mm, pvc tee 75mm, pvc coupler 75mm, pvc reducer 75x110mm, pvccaping cross 1inch, r22 refrigerant charging line, r410a refrigerant charging line, rain water gutter 75mmpvc pipe, refrigerant r-22 flexible charging 500 psi, refrigerant r-410 flexible charging 500 psi, r-32flexible charging 500psi, refrigerant r-32 tin 1 kg, refrigerant r-410a 1 kg tin, rubber sheet 3mm, soapdish plastic 150mm, ss connection hose0.5inchx12inch and 0.5inchx18inch and 0.5inchx24inch, sand, signal light set lh and rh, silicon carbidegrinding wheel 200x25x12.5, soap 50gm, soldering tipcleaning sponge, solid carbide drill bit 3to12mm, square head bolt m10 70mm, standard pipe bracketsset with clamps, taflon tap, taps steel 0.5inch, tapspvc 0.5inch, thermostatic expansion vlave flare type, thermostat 110 2xspdt, thinner for epoxy paint, thrust washer for splendor plus, valve brass, vulcanizing roll tikdi, v-belt, wire brush 35mm, lubrication oil enclon 38 or 62, coolant pentagon, lubricating oil pentagon way 68, oil for filter unitspindect 12, tarpaulin or plastic cover for cnctrainer mtab flex turn, wooden screw 12x5mm, wooden screw 25x6 mm

Central Government/Public Sector

TRN :36191275 | 09 Jan, 2026

Tender Value : 2.33 Crore

New Delhi - Delhi

Tender for gem bids for sitc, bid number gem2025b7022077 dated 19-12-2025 bid document1 37 1 1 outdoor colour dome ptz camera, indoor fixed colourdome camera, varifocal outdoor fixed ir colour bulletcamera, l2 switch, l2 switch industrial grade, 1g sfpmodule, rack mountable vms server, rack mountableanalytics server, rack mountable nas server -140 tb, 8port kvm switch, 65 inches led display, 43 inches display, workstation including operating system, cctv console, speed dome controller joystick, vms software andrequired camera connection license, frs or anpr softwarewith camera license, vms client viewing license, cctv 19inches equipment rack 42 u, cctv 19 inches weatherproofequipment rack 9 u, 25 mm dia pvc conduit, supply ofarmoured optic fibre communication cable, laying ofarmoured optic fibre communication cable, supply of 40mm dia hdpe pipe, laying of 40 mm dia hdpe pipe onsurface or recess or concelaed, laying of 40 mm dia hdpepipe direct in ground, supplying and drawing of 1 run ofutp 4 pair cat 6 lan cable, supplying and drawing of 2 runof utp 4 pair cat 6 lan cable, supplying and drawing of 3run of utp 4 pair cat 6 lan cable, hot dipped galvanisediron cable tray 100 mm width x 50 mm depth x 1.6 mmthickness, powder coating m.s. cable tray bends 100 mmwidth x 50 mm depth x 1.6 mm thickness, 1.1kv grade, power cable of 3 core 1.5 sq mm, laying and fixing of upto35 sq. mm clamped with 1mm thick saddle, laying of upto35 sq mm in ground, rj45 io faceplate with gang box orbackbox, 6 port light guide interconnect unit liu, sc lcfiber patch cord-3 mtrs, 15 kva online ups, lowimpedance digital grounding system 240ka, 24 ports rj45patch panel with itegrated surge protection, rj45 surgearrestor of class d, 20 mm ms flexible pipe with pvccoating, excavation of the cable trenches in hard rock, 25mm x 5mm copper strip from earth electrode, copperbonded rod with low carbon steel, 6.0 metre hot dipgalvanised octagonal pole, installation, integration, testingand commissioning of the complete system //bid details2 / 37

Central Government/Public Sector

TRN :36183484 | 07 Jan, 2026

Tender Value : 0

Varanasi - Uttar Pradesh

Tender for gem bids for xlpe cable for working voltages up to and including 1.1 kvas per is 7098 part 1 q2 . . % % 4 4 /mse relaxation for years ofexperience and turnoverno& % & % . . % % 4 4 /startup relaxation for years ofexperience and turnoverno 5 5 & & /document requiredfrom sellercertificate requested in atc, oem authorization certificatein case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer7 7 9 9 : : ; ; & 9 & 9 < < 9 9 ; ; > >? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?no & & b b c c / minimum number ofbids required to disable automatic bidextension1; 9; 9 c c, , f f -- / / number of days for which bidwould be auto--extended7 c /bid number: gem/2025/b/7007869; /dated: 16-12-2025 & & / bid document1 / 10 7 < 7 < ; ; ; ; / /number of auto extension count1 p %p % ;5 ;5 ; ; /bid to ra enabledno 4 4 /type of bidsingle packet bid q q & s & s /time allowed for technicalclarifications during technical evaluation2 days t t b b u u t t 4 4 / % % < 9 < 9 : : /inspection required byempanelled inspection authority / agenciespre-registered with gemyesinspection to be carried out by buyers ownempanelled agencyyestype of inspectionpre dispatchname of the empanelled inspectionagency/ authorityrites q q u u /evaluation methodtotal value wise evaluation x & x & /arbitration clauseno /mediation clauseno //bid details /emd detail > /advisory bankstate bank of india /emd amount78675 /epbg detail > /advisory bankstate bank of india 4 %/epbg percentage%5.00 b /duration of epbgrequired months.18a. . % & 4& % & % 4 > \ p 9 /emd exemption: the bidder seeking emd exemption, must submit the valid supporting documentfor the relevant category as per gem gtc with the bid. under mse category, only manufacturers for goods andservice providers for services are eligible for exemption from emd. traders are excluded from the purview of thispolicy.b. , , t < ; / emd & performance securityshould bein favour of beneficiary, wherever it is applicable. 2 / 10 /beneficiary : payable at varanasioffice of the senior divisional finance manager, ner, varanasi - 221002, indian railways, north eastern railway, ministry of railwaysfa and cao ner gkp /splitting /splitting appliedyes c, f % f ; / maximum no. ofbidders amongst which order may be split2 p ; 7 ; p ; / split criteria basedon which quantity will be distributedprice differential between l1 & l2- quantity distributionration between l1 and l2 upto 3%- 60:40 more than 3%and upto 5%-65:35 more than 5%- at least 65% on the l1tenderer. for the quantity to be ordered on the l2 tenderer, tc/taa shall decide. / mii purchase preference / mii purchase preferenceyes ; 5 < 4, ; q l1+x% < / purchasepreference to mii sellers availabele upto pricewithin l1+x%20 ; < 4 4 / maximum percentage of bidquantity for mii purchase preference50 % - - ; 4 2017 7 1/7 2 & % % ; 16.09.2020 - / allowparticipation only from class 1/class 2 localsuppliers as per the publicprocurementpreference to make-in-india order2017 date 16.09.2020as amended andapplicable time to timeyes, in compliance with the mii order : dpiit orderasamended and applicable time to time /mse purchase preference /mse purchase preferenceyes c e % <4, ; q l1+x% < /purchase preference to mse oems available uptoprice within l1+x%153 / 10 c e < 4 4 / maximumpercentage of bid quantity for mse purchasepreference251. preference to make in india products for bids < 200 crore:preference shall be given to class 1 local supplieras defined in public procurement preference to make in india, order 2017 as amended from time to time and itssubsequent orders/notifications issued by concerned nodal ministry for specific goods/products. the minimumlocal content to qualify as a class 1 local supplier is denoted in the bid document. if the bidder wants to avail thepurchase preference, the bidder must upload a certificate from the oem regarding the percentage of the localcontent and the details of locations at which the local value addition is made along with their bid, failing whichno purchase preference shall be granted. in case the bid value is more than rs 10 crore, the declaration relatingto percentage of local content shall be certified by the statutory auditor or cost auditor, if the oem is a companyand by a practicing cost accountant or a chartered accountant for oems other than companies as per the publicprocurement preference to make-in -india order 2017 dated 04.06.2020. only class-i and class-ii local suppliersas per mii order dated 4.6.2020 will be eligible to bid. non - local suppliers as per mii order dated 04.06.2020 arenot eligible to participate. however, eligible micro and small enterprises will be allowed to participate .thebuyers are advised to refer the om no.f.1/4/2021-ppd dated 18.05.2023.om no.1 4 2021 ppd dated 18.05.2023 for compliance of concurrent application of public procurement policyfor micro and small enterprises order, 2012 and public procurement preference to make in india order, 2017. 2. purchase preference will be given to mses having valid udyam registration and whose credentials arevalidated online through udyam registration portal as defined in public procurement policy for micro and smallenterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises andits subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail themselves of thepurchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders areexcluded from the purview of public procurement policy for micro and small enterprises and hence resellersoffering products manufactured by some other oem are not eligible for any purchase preference. in respect of bidfor services, the bidder must be the service provider of the offered service. relevant documentary evidence inthis regard shall be uploaded along with the bid in respect of the offered product or service and buyer will decideeligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 isnot an mse and mse seller s has / have quoted price within l-1+ 15% selected by buyer of margin ofpurchase preference /price band defined in relevant policy, such mse seller shall be given opportunity to matchl-1 price and contract will be awarded for 25% selected by buyer percentage of total quantity. the buyers areadvised to refer the om no. f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 forcompliance of concurrent application of public procurement policy for micro and small enterprises order, 2012and public procurement preference to make in india order, 2017. benefits of mse will be allowed only if seller isvalidated on-line in gem profile as well as validated and approved by buyer after evaluation of documentssubmitted. 3. inspection of stores by nominated inspection authority / agency of buyer or theirauthorized representativesan independent third party professional inspection body can help buyer in mitigating buyer s risk with pre-dispatch/post-dispatch inspection in order to ensure that equipment, components, solutions and documentationconform to contractual requirements. the buyer has a right to inspect goods in reasonable manner and withinreasonable time at any reasonable place as indicated in contract. inspection fee/ charges as pre-greed betweenbuyer and inspection agency would be borne by the buyer as per their internal arrangement but may berecovered from the seller if the consignment failed to conform to contractual specification and got rejected bythe inspection officer .if so requested and accepted by the seller, initially seller may pay for inspectioncharges as applicable and get the same reimbursed from buyer if consignment accepted by the inspectingofficer . for reimbursement seller has to submit proof of payment to inspection agency.seller/oem shall send a notice in writing / e-mail to the inspecting officer / inspection agency specifying the placeof inspection as per contract and the inspecting officer shall on receipt of such notice notify to the seller the dateand time when the stores would be inspected. the seller shall, at his own expenses, afford to the inspectingofficer, all reasonable facilities as may be necessary for satisfying himself that the stores are being and or havebeen manufactured in accordance with the technical particulars governing the supply. the decision of thepurchaser representative /inspection authority regarding acceptance / rejection of consignment shall be final andbinding on the seller.the seller shall provide, without any extra charge, all materials, tools, labour and assistance of every kind which4 / 10 the inspecting officer may demand of him for any test, and examination, other than special or independent test, which he shall require to be made on the sellers premises and the seller shall bear and pay all costs attendantthereon.the seller shall also provide and deliver store / sample from consignment under inspection free of charge at anysuch place other than his premises as the inspecting officer may specify for acceptance tests for whichseller/oem does not have the facilities or for special/ independent tests.in the event of rejection of stores or any part thereof by the inspecting officer basis testing outside owing to lackof test facility at sellers premises, the seller shall, on demand, pay to the buyer the costs incurred in theinspection and/or test. cost of test shall be assessed at the rate charged by the laboratory to private persons forsimilar work.inspector shall have the right to put all the stores or materials forming part of the same or any part thereof tosuch tests as he may like fit and proper as per qap/governing specification. the seller shall not be entitled toobject on any ground whatsoever to the method of testing adopted by the inspecting officer.unless otherwise provided for in the contract, the quantity of the stores or materials expended in test will beborne by seller.inspecting officer is the final authority to certify performance / accept the consignment. the inspectingofficer s decision as regards the rejection shall be final and binding on the seller.the seller shall if so required at his own expense shall mark or permit the inspecting officer to mark all theapproved stores with a recognised government or purchasers mark.xlpe cable for working voltages up to and including 1.1 kv as per is 7098 part 1 18300 meter 5 5 1 2 & & % % % % f f < < % % 4 g4 g b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively s s /technical specifications s / as per gem category speci cation /speci cation s s /specificationname b b q q /bid requirementallowed valuesstandardsconformity of thespecification for xlpe cableas per is:7098 part 1: 1988 latestcables suitable for use inminesnocables suitable for use inlow temperatureapplicationsyesgenericclassification of cables forimproved fire performacecategory01nominal area of conductorin sq mm35number of core in nos4constructionmaterial of conductoraluminiumconductor material standardas per is:8130:2013 latestconstruction of the conductorstranded5 / 10 colour of xlpe insulationred, yellow, blue, black, grey, natural, for 6 core andabove as per cl.10.1 of is:7098type of inner sheaththermoplasticarmouringtype of cablearmoured cablematerial of armouringgalvanized steel formed wiretype of armouringsingle wirenumber of armouring wire /strip for each size of cable innos - must declare hint: forunarmoured cables select 07outer sheathouter sheath standardconforming to is:5831:1984 latesttype of outer sheathpvc-st2colour of outer sheathblackmarking on cablemanufacturers identification oncableas per cl.17.1 of is:7098 part 1: latesttype of sequential marking oncableembossed on cablecable identificationas per cl.17.2 of is:7098 part 1: latestpacking andmarkingpacking and markingas per cl.18.1 and 18.2 of is:7098 part 1: latestdrum standardas per is:10418 latestmarking on the drumas per cl.18.2 of is:7098 part 1: latestcertificationavailability of type test reportfrom govt lab/ nabl accreditedlab / ilac accredited labyes as per cl.15 of is:7098 part 1availability of optional testreportscold bend test for outer sheath, cold impact test forouter sheath, resistance test for armour, notapplicable /speci cation s s /specificationname b b q q /bid requirementallowed values //p ; i p ; i /consignees/reporting officer and quantity5. .5. ./s.no. //p ; i p ; i /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1deepak yadav221002, office of thedivisional railwaymanager, north easternrailway, varanasi18300906 / 10 5 : : k k/buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period theadditional time shall commence from the last date of extended delivery period. the additional deliverytime shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the originaldelivery period while exercising the option clause. bidders must comply with these terms.2. scope of supplyscope of supply bid price to include all cost components : only supply of goods3. inspectionnominated inspection agency: on behalf of the buyer organization, any one of the followinginspection agency would be conducting inspection of stores before acceptance:pre-dispatch inspection at seller premises applicable only if pre-dispatch inspection clause has beenselected in atc:ritespost receipt inspection at consignee site before acceptance of stores:consignee4. inspectionpre-dispatch inspection at seller premises fee/charges to be borne by the buyer: beforedispatch, the goods will be inspected by buyer / consignee or their authorized representative or bynominated external inspection agency independently or jointly with buyer or consignee as decided bythe buyer at seller premises or at designated place for inspection as declared / communicated by theseller for their compliance to the contract specifications. fee/charges taken by the external inspectionagency and any external laboratories testing charges shall be borne by the buyer. for in-house testing, the sellers will provide necessary facilities free of cost. seller shall notify the buyer through e-mail aboutreadiness of goods for pre-dispatch inspection and buyer will notify the seller about the authorizedrepresentative/ nominated external inspection agency and the date for testing. the goods would bedispatched to consignee only after clearance in pre-dispatch inspection. consignees right of rejection asper gtc in respect of the goods finally received at his location shall in no way be limited or waived byreason of the goods having previously been inspected, tested and passed by buyer/ consignee or itsnominated external inspection agency prior to the goods shipment. while bidding, the sellers should takeinto account 7 days for inspection from the date of email offering the goods for inspection. any delay ininspection beyond 7 days shall be on the part of the buyer and shall be regularised without liquidateddamages.when there is requirement of submission the advance sample, the seller shall inform the buyer promptlythrough emails about the date of submission of sample to the buyer nominated inspection agency.5. forms of emd and pbgbidders can also submit the emd with account payee demand draft in favour offa & cao ner gkppayable atvaranasi.bidder has to upload scanned copy / proof of the dd along with bid and has to ensure delivery of hardcopy7 / 10 to the buyer within 5 days of bid end date / bid opening date.6. forms of emd and pbgbidders can also submit the emd with fixed deposit receipt made out or pledged in the name of a/cfa & cao ner gkp. the bank should certify on it that the deposit can be withdrawn only on the demand or with the sanctionof the pledgee. for release of emd, the fdr will be released in the favour of the bidder by the buyer aftermaking endorsement on the back of the fdr duly signed and stamped along with covering letter. bidderhas to upload scanned copy/ proof of the fdr along with bid and has to ensure delivery of hardcopy to thebuyer within 5 days of bid end date/ bid opening date7. forms of emd and pbgsuccessful bidder can submit the performance security in the form of account payee demand draft alsobesides pbg which is allowed as per gem gtc. dd should be made in favour offa & cao ner gkppayable atvaranasi. after award of contract, successful bidder can upload scanned copy of the dd in place of pbg and has toensure delivery of hard copy to the original dd to the buyer within 15 days of award of contract.8. forms of emd and pbgsuccessful bidder can submit the performance security in the form of fixed deposit receipt also besidespbg which is allowed as per gem gtc. fdr should be made out or pledged in the name offa & cao ner gkpa/c name of the seller. the bank should certify on it that the deposit can be withdrawn only on thedemand or with the sanction of the pledgee. for release of security deposit, the fdr will be released infavour of bidder by the buyer after making endorsement on the back of the fdr duly signed and stampedalong with covering letter. successful bidder has to upload scanned copy of the fdr document in place ofpbg and has to ensure delivery of hard copy of original fdr to the buyer within 15 days of award ofcontract.9. buyer added bid specific atcbuyer added text based atc clausesa firm must attach following documents as applicable in addition to any other documents required as per specification:1. bis certificate of oem clearly evidencing the validity for is:7098 part 1: 1988 latest.2. documents in support of mse registration.3. documents in support of make in india policy i.e. % of local content in the offered product for purchase preference.4. in case of authorized dealer, firm must attach bid specific authorization from oem.5. proven past performance.b past performance criteria: the bidder or its oem themselves or through reseller s should have supplied same or

State Government

TRN :36165667 | 08 Jan, 2026

Tender Value : 40.00 Lacs

Bathinda - Punjab

Tender for gem bids for supply, single nozzle 3d printer, pcb milling machine, co2 lasercutting machine, vinyl printer, 3d scanner, lathe machinecum milling, belt and disc sanding machines, scroll saw, wood turning lathe, bench top drill machine, portablewelding machine, computerized sewing machine, filamentdehydrator, reflow oven, digital multimeter, mso 200mhz, digital oscilloscope, power supply, functiongenerator, bench top multimeter, non-contact voltagetester, lcr meter, soldering station, digital microscope, soldering rework station, hand drill machine, cordlessdrill, jig saw, miter saw, hot air gun, table saw, benchgrinder, angle grinder, straight grinder, circular saw, blower, cordless screw driver, vaccum cleaner, randomorbit sander, planer, cordless vaccum cleaner with kit, rotary tool kit, rubber grip hacksaw, hacksaw mini, clawhammer steel shaft, ball pein hammer, rubber mallet, ring spanner set 12 pcs, open end spanner set 12pcs, combination spanner set 8 pcs, allen key set 10pcs, allenkey set 12pcs, combination plier, long nose plier, circlipstraight 5 inch, circlip bent, diagonal cutter, wire stripper, adjustable spanner, pipe wrench, c clamp, c-clamp, snap- off knife, 16pcs screw driver set, 6pcs precisionscrew driver set, max steel snip cutter, pvc pipe cutter, hot glue gun, small file set, big file set, chisel set, punchset, bench vices, router bit starter kit, drill bit set, babyvice, ratchet set, pegboard, digital vernier caliper, micrometer, steel rule 300mm, steel rule 600mm, engineering square, meter tape 30m, measuring tape 3m, measuring tape 5m, spirit level, goggle, apron, earmuff, mask, fire extinguisher, first aid kit, gloves pair, 3d printer filament, acrylic sheet, foam sheet 8mm, 4ft x4ft, ply board 5mm, 2ft x 4ft, nylon rod 12mm 15mm18mm 25mm of length 1m, nuts, 3mm 4mm 5mm 6mm /bid number: gem/2025/b/7013688* /dated: 18-12-2025 & & / bid document1 / 110 & & /item category8mm 10mm 12mm, pack of 100, bolts, screws, washers, studs, nails, adhesive 1kg, 2 way tape, pvc pipe .75inch, 10ft, pvc pipe 1 inch10ft, pvc pipe 1.5inch 10ft, pvcpipe 2.0inch 2.5 inch, 3inch length 10ft, aluminiumchannels, l c box strip length 12ft, pcb drill bit 0.4mm, pcb drill bit 0.8mm, pcb drill bit 1mm, drill bit 4mm, drillbit 5mm, drill bit 6mm 8mm, 10mm, 12mm, arduino unor3, arduino nano, arduino mega, raspberry pi model 4b, 4gb, esp8266 nodemcu, esp32 development board, beaglebone blu, beaglebone black, voltage regulatormodule, mini micro submersible water pump, piezoelectricplate, 8x8 led matrix module, bluetooth, 7 inch segmentled display, gsm or gprs or gps module, laser module, ldr module, 4x4 matrix keypad, joy stick module, activebuzzer big, active buzzer small, motor driver, soundplayback module, bo motors, vibrating motor, capacitivetouch switch, ir sensors obstacle sensors, triple axismagnetometer, humidity sensor, mq-2, mq-3, mq-4, mq-5, mq-7, ultrasonic sensor module, triple axisaccelerometer, pir motion detector module, pulse rateheart sensor, relay module, soil moisture sensor, touchsensor, rain drop sensor, flex sensor, temperaturesensor, force pressure sensor, colour recognition sensor, water flow sensor, sound sensor, ir sensor array forline following, rfid reader-tags, rf modules txand rx315 mhz ask, stepper motor with driver board, servomotor 360 rotation, servo motor 180 rotation, metal gearservo motor, 180 rotation, solder wire 100grm, solderflux, 830 points solderless breadboard, 400 pointssolderless breadboard, copper clad board single side, copper clad board double side, male to male breadboardjumper, female to female breadboard jumper, male tofemale breadboard jumper, usb cables, radium cutterknives, hack saw blades, centre table 1800x900x750mm, machine table 1200x750x750 mm, esd table

Central Government/Public Sector

TRN :36234291 | 08 Jan, 2026

Tender Value : 34.85 Lacs

Port Blair - Andaman And Nicobar Islands

Tender for gem bids for supply, supply, installation, testing and commissioning of 20 kvadg set, transportation sea freight loading and unloadingthe dg set upto keating point lighthosue, supply, installation, testing and commissioning of armoured cable2 core 25 sqmm, supply, installation, testing andcommissioning of earthing, supply, installation, testing andcommissioning of copper strip, laying of cable and dg setinstallation, supply, installation, testing andcommissioning of amf panel, consumable spares for 02years i.e preventive maintenance twice a year

Central Government/Public Sector

TRN :36191275 | 09 Jan, 2026

Tender Value : 2.33 Crore

New Delhi - Delhi

Tender for gem bids for sitc, bid number gem2025b7022077 dated 19-12-2025 bid document1 37 1 1 outdoor colour dome ptz camera, indoor fixed colourdome camera, varifocal outdoor fixed ir colour bulletcamera, l2 switch, l2 switch industrial grade, 1g sfpmodule, rack mountable vms server, rack mountableanalytics server, rack mountable nas server -140 tb, 8port kvm switch, 65 inches led display, 43 inches display, workstation including operating system, cctv console, speed dome controller joystick, vms software andrequired camera connection license, frs or anpr softwarewith camera license, vms client viewing license, cctv 19inches equipment rack 42 u, cctv 19 inches weatherproofequipment rack 9 u, 25 mm dia pvc conduit, supply ofarmoured optic fibre communication cable, laying ofarmoured optic fibre communication cable, supply of 40mm dia hdpe pipe, laying of 40 mm dia hdpe pipe onsurface or recess or concelaed, laying of 40 mm dia hdpepipe direct in ground, supplying and drawing of 1 run ofutp 4 pair cat 6 lan cable, supplying and drawing of 2 runof utp 4 pair cat 6 lan cable, supplying and drawing of 3run of utp 4 pair cat 6 lan cable, hot dipped galvanisediron cable tray 100 mm width x 50 mm depth x 1.6 mmthickness, powder coating m.s. cable tray bends 100 mmwidth x 50 mm depth x 1.6 mm thickness, 1.1kv grade, power cable of 3 core 1.5 sq mm, laying and fixing of upto35 sq. mm clamped with 1mm thick saddle, laying of upto35 sq mm in ground, rj45 io faceplate with gang box orbackbox, 6 port light guide interconnect unit liu, sc lcfiber patch cord-3 mtrs, 15 kva online ups, lowimpedance digital grounding system 240ka, 24 ports rj45patch panel with itegrated surge protection, rj45 surgearrestor of class d, 20 mm ms flexible pipe with pvccoating, excavation of the cable trenches in hard rock, 25mm x 5mm copper strip from earth electrode, copperbonded rod with low carbon steel, 6.0 metre hot dipgalvanised octagonal pole, installation, integration, testingand commissioning of the complete system //bid details2 / 37

Related Searched Keywords : ms strip

List of ms-strip Tenders

Get ms strip Tender Alert...

Related Searched Keywords : ms strip

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us