Filters

List of paint-item Tenders

List of latest paint-item Tenders in Indian Tenders. Click on any paint-item Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for paint-item Tenders.

All-Tenders (1266)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :49057888 | 19 May, 2025

Tender Value : 0

Una - Himachal Pradesh

Tender for gram panchayat mazara, block and district una invites tenders for the supply of the following construction materials and others for the development works to be done under various items for the financial year 2025-2026:- gravel keshar 10mm, 20mm, gutka crusher 40mm, sand washed crusher, sand local, soil (per cubic meter), gravel and gutka gola (per cubic meter), brick (ist class) (per), rebar (isi tmt) 16,12,10,8 mm (per kg), pipe iron squre3x1.6, 1.6 x 1.6, 1x1, forged iron squre 32mm, cgisheet coated 8, 10, 12, 16 (per), pvc pipe is18, 6, 4, 2 40 (per meter), white cement (per kg), interlocking tiles (isi) (per sq. ft.), wall & floor tiles (151) (per sq. ft.), marbel (per sq. ft.), paint wood / iron, distemper material, emulation paint (plastic paint) (151) (per litre) & other paint items, rent shuttering wood, iron plate, scape folding (per sq. metre), rent mixture (per day), rent water tank (per day), carriage cement h.p state civil supplies from jalgran to ajouli (per bag), rent local trip tractor-trolley within 04 km. rent jcb (per hour), rent excavator (per hour), steel iron railing (per foot), gymeqpts, water tank plastic isi (500, 1000 litres), steel/iron bench,, bore well recharge complete in all respect (per meter) out door display size 4x6 p6 whether proof, announcement content pa eqptsahuja complete with 4/5/6 horns with fitting & fixing, cctv ip fiber based camera smp with audio color night vision wth 32 inch led tv with fitting & fixing and complete in all repect, split ac (isi) complete with fitting & fixing 1.5 ton & 2 tons, sanitary wares/ plumbing/ drainageltems, allmuniaum partition with door size 6.6 feet x 4 feet complete with fitting&fixing, paper a4 size (70 gsm) for printers, refilling printer cartriges 12a, 925a, amc automatic compostermachine smartenviro500 kgs & 150 kgs, amc led street lights, mikhi raj and laborer with bank account and aadhar card.

State Government

TRN :49057999 | 23 May, 2025

Tender Value : 0

Ghaziabad - Uttar Pradesh

Tender for tender for construction of civil works for increasing capacity from (1x500 plus 2x315 mva) to (2x500 plus 1x315 mva) at 400 k.v. sub-station-ist muradnagar ghaziabad. - earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) all kinds of soil including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by engineer-in-charge. 2 excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also includingramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all 3 providing and laying in position cement concrete of specified grade 1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)excluding the cost of centering and shuttering - all work up to plinth level : 4 providing and laying in position cement concrete of specified grade 1:5:10 (1 cement : 5 coarse sand (zone-iii) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)excluding the cost of centering and shuttering - all work up to plinth level : 5 providing and laying in position cement concrete of specified grade1:1½:3 (1 cement: 1½ coarse sand (zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) excluding the cost of centering and shuttering - all work up to plinth level : 6 providing and laying in position specified grade of reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand (zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources), excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level : 7 centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete 8 centering and shuttering including strutting, propping etc. and removal of form for walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. 9 centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platform 10 centering and shuttering including strutting, propping etc. and removal of form for columns, pillars, piers, abutments, posts and struts. 11 providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). 12 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. thermo-mechanically treated bars of grade fe-500d or more. 13 brick work in foundation & plinth with old dismantled bricks (supplied by department free of cost) and coarse sand mortar in 1:6 including supply of all other materials, labour, removing mortar & cleaning of old & used bricks,t&p etc complete . 14 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand). 15 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand). 16 dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with jamuna sand, with common burnt clay non modular bricks 17 supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of engineer-in-charge . 18 structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 19 mild steel or iron work in heavy sizes such as trusses built up gates, door frames, record, racks roof workgates etc. wrought to required form including holes rivetting or welding where necessary and also fixingin proper position and alignment but when steel is to be provided by the department . 20 12 mm cement plaster of mix 1:4 (1 cement: 4 coarse sand). 21 extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturers specification. 22 extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. 23 neat cement punning 24 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. 25 demolishing cement concrete (nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)) manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 26 demolishing brick work in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. 27 dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. 28 demolishing r.c.c. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars. 29 dismantling of existing pale / security / chain link fencing including post and stacking properly as per direction of the engineer - in - charge. including all labour and t&p etc. required for proper completion of the work 30 disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 31 supply of 25 mm. dia m.s. anchor bolts (conforming to is 266)500 mm. long with base plate (50x50x6mm) welded with anchor boltsincluding its threading upto a length of 10cm. and also supplyof a pair of galvanized standard nuts with threading including supply of 5 mm thick washer and cost of labour, material & t&p for proper completion of work 32 fixing and grouting 25 mmand below dia m.s. anchor bolt in proper alignment level and setout with the help of a template including supply of all labour t&p etc. reqd. for proper completion of the work. (labour rates only) . 33 grouting of 90/105 lbs m.s. railincluding cost of all materials,labour & t&p for fixing of rail in proper alignment, leveland position in transformer plinth foundation etc. as perdirection of eng i/c. (rail to be supplied by thedept.)(labour rates only) . 34 s/f in position 105 lbs m.s. rail for transformer plinth including cost of all labour, material and t&p etc. required for proper completion of the work. 35 fixing and grouting of trench edging in proper level and alignment including cost of all labour, and t&p etc. required for proper completion of the work but excluding cost of c.c. (labour rates only) . 36 fixing of template in position level and alignment for groutingof anchor bolt in auxiliary gantry (labour rate only). 37 fixing of cable trench racks in proper position and alignment including cost of all labour, material and t&petc. required for proper completion of the work (labour rate only). 38 fabrication of template forauxiliary foundation including cost of all labour, and t&p etc. required for proper completion of the work. steel shall be arranged by contractor free of cost. this template shall be property of contractor.(labour rate only). 39 4.0 cm thick 1:1.5:3 plain cement concrete floor with cement, approved coarse sand & 2cm gradedapproved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement andmarble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels ifany and giving them a uniform finish including supply of all materials, labour and t&p etc, required forproper completion of the work. without base cc 40 placing of trench cover of all size in proper position including transportation from different places withinthe s/s area including all labour, t&p etc. required for proper completion of the work as per direction ofengineer - in - charge. 41 preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres. 42 providing and laying swr, pvc ( finolex or equivalent ) pipe including cost of excavation, c.c etc including its jointing and connection, all materials, labour and t&p etc. required for proper completion of the work (110mm dia pipe) 43 providing and laying design mix cement concrete of m-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy m.s. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of engineer-incharge (item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately).cement concrete manufactured in automatic batching plant (rmc plant) i/c transportation to site in transit mixer 44 providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood pre-laminated one side decorative lamination and other side balancing lamination grade i, type ii, is : 12823 marked, including priming coat on unexposed arrangement and screws etc. complete : (12mm thick partical board) 45 hiring of beldar(labour).

State Government

TRN :49059002 | 14 May, 2025

Tender Value : 8.80 Lacs

Saharanpur - Uttar Pradesh

Tender for tender for road safety work on the small bridge at kilometer 5/1 of the nausera sikandar pur faizabad badshahi bagh road in saharanpur district - providing and erecting a w metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ismc series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to is:1367 and is:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810 2 providing and fixing retro-reflective signboards comprising of customised modular pu epoxy coated ms angle iron frame work, aluminum composite panel (acp) as base board. micro prismatic retro-reflective sheet and electro cut colored overlay film/latex printing. the horizontal ..................................micro prismatic retro-reflective sheet conforming to type-iv of astm: d 4956-09 shall be pressure fixed. the retro-reflective sheeting shall be tested for 3 year outdoor weathering test in indian conditions as per irc 67: 2012 & proof of the same in form of government report shall be uploaded with quoting tender. the rate include all materials, labour, equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of the engineer-in-charge. signage on ms angle frame of (35x35x5)mm (ch-27 new item 5) 3 supplying and instalation of delinators (road way indicators, hazard markers, object marker) 120-150 cm. high above ground level, painted black and white in 15cm. wide strips, fitted with 80x100mm rectangular or 75mm dia circular reflectorised panel at the top buried or pressed into the ground and conforming to irc:79 and the drawing. with tri-colour retro -refractive sheet. (20 x 3 cm), rates are inclusive of all taxes, royalty etc. all t&p/machine material and labour required for proper completion of work. (ch-27 new item 10(ii) 4 reflective raised pavement marker providing and fixing of raised pavement markers (cat eye) type x-astmd-4956-04 avery dennision/3m(usa make) having moulded body of polycarbonate, asa, hips or abs able to support a load of 13.635 m.t. tested in accordance with astmd 4280 type h and other requirement mentioned in mort&h circular, its reflective lens made of micro prismatic lens (capable of providing total internal reflection of light), electronically welded to the body. the length, height and width of the body shall not exceed 130 mm, 20 mm and 105 mm respectively, the area of each reflective surface shall not be less than 13 sq. cm . on each side sloping at the angle of 35 + 5 degree to the base to ensure maximum reflectively. it shall comply to specification of category a of mort&h circular no. rw/nh 33023/10/97-do-iii dated 11.06.97 lenses shall be moulded of methyl methecrylate conforming to astmd 788 or equivalent.with 7 years warranty. rate shall be inclusive of all taxes, royalty, etc. all t&p/ machine material and labour required for proper completion of work. (ch-27 new item -10)

Central Government And Public Sector

TRN :49059263 | 17 May, 2025

Tender Value : 14.93 Lacs

Howrah - West Bengal

Tender for tender for structural strengthening and external painting of b e college t e howrah; 1 demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2 nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 3 dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 4 of area 3 sq. metres and below 5 dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 6 for thickness of tiles 10 mm to 25 mm 7 dismantling c.i. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of engineer-in-charge: 8 up to 150 mm diameter 9 dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 10 disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 11 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 12 1:2:4 (1 cement : 2 coarse sand(zone-iii) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 13 reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 14 1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 15 reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources). 16 reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii)derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources). 17 centering and shuttering including strutting, propping etc. and removal of form for : 18 foundations, footings, bases of columns, etc. for mass concrete 19 columns, pillars, piers, abutments, posts and struts 20 vertical and horizontal fins individually or forming box louvers band, facias and eaves boards 21 small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like 22 smooth finishing of the exposed surface of r.c.c. work with 6 mm thick cement mortar 1:3 (1 cement : 3 fine sand). 23 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 24 providing and fixing fiber glass reinforced plastic (frp) door frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. the laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. the frame shall be covered with fiber glass from all sides. m.s. stay shall be provided at the bottom to steady the frame. 25 providing and fixing to existing door frames. 26 30 mm thick glass fibre reinforced plastic (frp) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick frp laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick frp laminate for panels conforming to is: 14856, including fixing to frames. 27 steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 28 in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 29 providing and laying rectified glazed ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1stquality conforming to is : 15622, of approved make, in colours white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4(1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. 30 providing and fixing on wall face unplasticised - pvc moulded fittings/accessories for unplasticised rigid pvc rain water pipes conforming to is 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion. 31 single tee with door -110x110x110 mm 32 bend 87.5° -110 mm bend 33 15 mm cement plaster on the rough side of single or half brick wall of mix : 34 1:6 (1 cement: 6 fine sand) 35 finishing walls with acrylic smooth exterior paint of required shade : 36 new work (two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) 37 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 38 two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. 39 removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 40 dismantling w.c. pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of engineer-in- charge. 41 providing and laying app (atactic polypropylene polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the samemembrane manufactured of density at 25°c, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. the vital physical and chemical parameters of the membrane shall be as under : joint strength in longitudinal and transverse direction at 23°c as 350/300 n/5 cm. tear strength in longitudinal and transverse direction as 60/80n. softening point of membrane not less than 150°c. cold flexibility shall be upto -2°c when tested in accordance with astm, d - 5147. the laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 42 3 mm thick 43 providing and fixing white vitreous china pedestal type (european type/ wash down type) water closet pan. 44 providing and fixing p.v.c. low level flushing cistern with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete. 45 10 litre capacity - white 46 providing and fixing solid plastic seat with lid for pedestal type w.c. pan complete : 47 white solid plastic seat with lid 48 providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. 49 providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c. waste fittings complete. 50 flexible pipe -32 mm dia 51 providing and fixing ptmt bib cock of approved quality and colour. 52 15mm nominal bore, 86 mm long. weighing not less than 88 gms. 53 providing and fixing ptmt stop cock of approved quality and colour. 54 15 mm nominal bore, 86 mm long. weighing not less than 88 gms. 55 providing and fixing ptmt pillar cock of approved quality and colour . 56 15mm nominal bore, 107 mm long. weighing not less than 110 gms. 57 providing and fixing unplasticised p.v.c. connection pipe with ptmt nuts, collar and bush of approved quality and colour. 58 15 mm nominal bore with 45 cm length. 59 chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of engineer-in-charge 60 75 mm average thickness 61 50 mm average thickness 62 25 mm average thickness 63 cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of engineer-in-charge. 64 bars upto 12 mm diameter 65 bars above 12 mm diameter 66 providing, mixing and applying bonding coat of approved adhesive on chipped portion of rcc as per specifications and direction of engineer-in-charge complete in all respect. 67 sbr polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer 68 providing, mixing and applying sbr polymer (of approved make) modified cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of engineer-in-charge. note: measurement and payment: the pre-measurement of thickness shall be done just after the surface preparation is completed and payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 n/sqmm2). 69 12 mm average thickness. 70 25 mm average thickness in 2 layers. 71 50 mm average thickness in 3 layers. 72 providing and fixing upvc pipes (sch 40 upvc as per astm d- 1785 pipes) including all upvc plain and brass threaded fittings. including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step upvc solvent cement and testing of joints complete as per direction of engineer in charge. internal work- exposed on wall 73 15 mm nominal bore 74 20 mm nominal bore 75 25 mm nominal bore 76 uprooting and removing small plants from the surface of walls, parapet, etc. at any height by cutting chase for removing roots and using necessary chemicals etc. to prevent further growth of plants and mending good damages complete. 77 a) small plant of girth of exposed stem up to 75mm 78 providing and fixing soil waste and vent pipes : 79 110 mm dia upvc soil waste pipe conforming to is:13592 1992 (type-b) manufactured by supreme industries limited or equivalent. 80 erection of single layer bamboo-scaffolding made of average 75 mm dia bamboos with adequate bracing, ties, ropes etc. for strong, stable and workable scaffolding for specified jobs ( above gf beyound 4.00m height) like replacement of sewage/ rw pipes & accessories, repairs to plasters, special repairs, replacement of glass panes, uprooting/ cutting of tree saplings etc including dismantling the scaffolding after the job is done and clearing the site complete as per the direction of the engineer-in-charge. [ projected area of scaffolding frame work on buiding elevation to be measured for payment] 81 felling of trees like banyan, pipul etc from compound walls, building walls, cornices etc by making scaffolding where necessary including cutting of trunks and branches, application of chemicals/weedicides to the remaining portion to kill the growth of tree and ultimately removing the roots from the walls by cutting walls and mending good complete. ( the rate is inclusive of the mending good the walls with bricks/concretes/plasters and disposing of branches/trunks to vats inside compound for further disposal) 82 a) of girth above 30 cm upto 60 cm (measured above 1.0 m from gl toupto 5.0 m height) 83 extra for shifting of existing scaffolding by lifting/dragging or partially dismantling and re-erecting the dismantled portion in position (shifting at least 1.50 m from initial centre line of position) over payment for initial erection & dismantling paid in original item of scaffolding. [ projected area of scaffolding frame work on buiding elevation to be measured for payment] 84 providing and fixing ptmt health faucet with hook and p.v.c. pipe (1.00 metre minm length) of approved quality and colour in w.c.s all complete as per direction of engineer-in-charge. 85 15 mm nominal bore with minimum 1.00 m pvc tube. 86 attending repairs to ms gate by removing corroded portion of gate with welding machine at site and replacing with new members as per actual requirement at site. (cost for labour and hire charges of welding machine including transporation, consumables. steel members will be paid separately) 87 providing and welding 2mm thick m.s. sheet to existing m.s. frame work including providing and appying a priming coat of approved steel primer all complete. 88 providing and fixing upvc floor trap 100mm dia inlet and 100 mm dia outlet. 89 providing and fixing ptmt 2 way bib cock of approved quality and colour, for fixing hand faucet in commode toilets all complete as per direction in charge.- 15mm nominal bore. 90 supplying, fitting and fixing in position fibre glass panes of approved quality with resin, nail, clip etc. as per is:12866-1989. 91 4.0 mm thick (6.72 kg/sq.m) 92 credit value for dismantled unserviceable mild steel/ iron materials. 93 credit value for dismantled g.i. pipes: 94 15 mm nominal dia. 95 20 mm nominal dia. 96 25 mm nominal dia. 97 credit value for dismnatled c.i./ s.c.i. pipes. 98 credit value for unserviciable brass bib/stop cocks/pillar tap

State Government

TRN :49059469 | 14 May, 2025

Tender Value : 5.90 Lacs

Saharanpur - Uttar Pradesh

Tender for tender for road safety work on the small bridge at km 6/1 of the mirzapur to sherpur pelo badshahi bagh road in saharanpur district - providing and erecting a w metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ismc series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to is:1367 and is:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810 2 providing and fixing retro-reflective signboards comprising of customised modular pu epoxy coated ms angle iron frame work, aluminum composite panel (acp) as base board. micro prismatic retro-reflective sheet and electro cut colored overlay film/latex printing. the horizontal ..................................micro prismatic retro-reflective sheet conforming to type-iv of astm: d 4956-09 shall be pressure fixed. the retro-reflective sheeting shall be tested for 3 year outdoor weathering test in indian conditions as per irc 67: 2012 & proof of the same in form of government report shall be uploaded with quoting tender. the rate include all materials, labour, equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of the engineer-in-charge. signage on ms angle frame of (35x35x5)mm (ch-27 new item 5) 3 supplying and instalation of delinators (road way indicators, hazard markers, object marker) 120-150 cm. high above ground level, painted black and white in 15cm. wide strips, fitted with 80x100mm rectangular or 75mm dia circular reflectorised panel at the top buried or pressed into the ground and conforming to irc:79 and the drawing. with tri-colour retro -refractive sheet. (20 x 3 cm), rates are inclusive of all taxes, royalty etc. all t&p/machine material and labour required for proper completion of work. (ch-27 new item 10(ii) 4 reflective raised pavement marker providing and fixing of raised pavement markers (cat eye) type x-astmd-4956-04 avery dennision/3m(usa make) having moulded body of polycarbonate, asa, hips or abs able to support a load of 13.635 m.t. tested in accordance with astmd 4280 type h and other requirement mentioned in mort&h circular, its reflective lens made of micro prismatic lens (capable of providing total internal reflection of light), electronically welded to the body. the length, height and width of the body shall not exceed 130 mm, 20 mm and 105 mm respectively, the area of each reflective surface shall not be less than 13 sq. cm . on each side sloping at the angle of 35 + 5 degree to the base to ensure maximum reflectively. it shall comply to specification of category a of mort&h circular no. rw/nh 33023/10/97-do-iii dated 11.06.97 lenses shall be moulded of methyl methecrylate conforming to astmd 788 or equivalent.with 7 years warranty. rate shall be inclusive of all taxes, royalty, etc. all t&p/ machine material and labour required for proper completion of work. (ch-27 new item -10)

State Government

TRN :49059518 | 16 May, 2025

Tender Value : 0

Gorakhpur - Uttar Pradesh

Tender for tender for supply of brick, cement, sand, gravel, grit, tiles, rod, hume pipe, paint, distemper, garbage trolley, incinerator, electronic items, electric items, sanitary kit, toilet set, solar light/ street light, high mast, interlocking brick, cemented chair, plastic seat, toilet set, furniture, cleaning kit, sign board, r.o plant, hand pump repair materials, wooden items at gorakhpur.

State Government

TRN :49060863 | 16 May, 2025

Tender Value : 0

Bilaspur - Himachal Pradesh

Tender for tender for supply of 1. sand crusher can - per foot, 2. gravel crusher 10mm, 20mm, 40mm- per foot, 3. soiling boulder stone/ local gravel, sand per -chatta (66 feet) per foot, 4. stone (cut stone) per stone (68 inch), 5. brick earthen kiln per 1000, 6. interlock tile/ pavers 40mm, 50mm, 60mm and cement concrete path tile per piece/per size, 7. soil cutting and breaker by jcb machine per cubic meter (hard/ soft rock) per hour, 8. material transportation (including cement up and down from bilaspur to nauni) by tractor jeep other vehicle per kilometer/ per trip/ per bag, 9. shuttering iron and wood per foot, 10. wood and aluminum fittings and door window items per bar cubic feet, 11. ply board sheets / other fancy ceiling / paneling sheets - item bar / per size bar, 12. hardware items (rebar 8mm, 10mm, 12mm, 16mm, angle, channel size bar, tile, paint, railing iron building fiting, sanitary fittings & labour rate etc.) item bar & per kg/ quintal / per point, 13. colour coated roof sheets etc. & ceiling sheets per sheeter size bar, 14. rcc culvert pipe size bar, 15. furniture tems (table & chairs, sofa settee, mat, lecture stand, etc. all furniture items per item with full description, 16. welding works per kg/ quintal, 17. mixer machine per day per hour, 18. painter per day square foot, 19. sign board/ wall writing/ painting size bar / others, 20. electrical fitting materials water pump bore well motor etc. labour item bar / per point, 21. lcb big, mike, computer, ups, projector etc. size bar, with company name, 22. gas heater size bar, with company name, 23. stationery various registers, paper etc. all items, 24. other material item bar.

Central Government/Public Sector

TRN :49060887 | 20 May, 2025

Tender Value : 0

Hubbali - Karnataka

Tender for supply of hot finish seamless (hfs) pipe nominal bore 25 mm,hot finish seamless (hfs) pipe nominal bore 25 mm,,hot finish seamless (hfs) pipe nominal bore 25 mm, heavy painted with two coats of re d oxide zinc chrome priming to is: 2074/2023 after grit blasting or mechanical brushing for air brake c oaching stock to is: 1239 (pt. i)-2004 (reviewed in 2019) [ warranty period: 30 months after the dat e of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ]

Local Bodies

TRN :49061002 | 14 May, 2025

Tender Value : 0

Ballia - Uttar Pradesh

Tender for tender for supply of brick, brick ballast, cement, san,d grit, stone chip, rod, grit, sanitary kit, solar light, street light, ro plant, high mast light, school bench, hand pump materials, ro plant, stationery, banner-poster, submersible and water supply materials, pipe, hum e pipe, stone dust, iron grill, iron pipe, asbestos sheet, tin shed, cement brick, cut stone, paint, gate, door, dal sprit, electrical items, snowcem, rebore, primer, distemper, plywood, kota stone, pvc pipe, pan, boulder, rickshaw, trolley, e-rickshaw, csc, hydraulic trolley, plastic bank, dustbin, incinerator.

Government Departments

TRN :49061056 | 13 May, 2025

Tender Value : 0

Bilaspur - Uttar Pradesh

Tender for supply of hardware and mechanical items season 2025-26 , supply of hardware , esab/asha isi wellding accessories as ppl maximum discount wef…. , carboraudum universal make grinding wheel as ppl maximum discount wef…. , miranda make hss tool bit cobalt 10%as ppl maximum discount wef…. , j.k. make files as ppl maximum discount wef…. , jhalani make hand tool as ppl maximum discount wef…. , addison/ it make tst drill as ppl maximum discount wef…. , totem make tap set as ppl maximum discount wef…. , champion make spring washer/spilt pin as ppl maximum discount wef…. , maharastra seemless make ibr pipe schedule 40 and 80 as ppl maximum discount wef…. , sanvik make carbide tip as ppl maximum discount wef…. , unique make:- tyre couplingas ppl maximum discount wef…. , unique make spare tyre as ppl maximum discount wef…. , fanner make gear coupling as ppl maximum discount wef…. , sant make caststeel/gun metal valve as ppl maximum discount wef…. , jmc make bearing sleeves as ppl maximum discount wef…. , unbrako make hightensile bolt/allenkey bolt/ stud/ nut as ppl maximum discount wef…. , ss bolt and nut as ppl maximum discount wef…. , ss allenkey bolt as ppl maximum discount wef…. , hindustan composite break liner ba quality as ppl maximum discount wef…. , felt belt goodyear/dunlop as ppl maximum discount wef…. , m.s bolt full thread inch all size std quality , m.s bolt half thread inch all size std quality , m.s bolt mmall size std quality , m.s nut inch size std quality , m.s nut mm size std quality , m.s plane washer all size , rubber joint jyoti make all size , standard rubber joint all size , emery colth carborundum make rough , emery colth carborundum makefine , emery paper carborundum make rough , emery paper carborundum make fine , emery tape carborundum make rough 2 inch , emery tape carborundum make fine 2 inch , emery colth john ok rough , emery colth jhon ok fine , emery paper jhon ok rough , emery paper jhon ok fine , emery tape jhon ok rough 2 inch , emery tape jhon ok fine 2 inch , aligator no. 27 (ameteep) , aligator no. 35 (ameteep) , aligator no. 45 (ameteep) , all kind of welding accessories isi make , araldite 180 gm , araldite 550 gm , rustoline 500 ml , emery paste rough & fine 400 gm , graphited powder & molykot , locktite 641 no , aluminum rivetsany sizes , ana bond 666 , bb coupling spring for fibrizer , brass brazing rod 1/16 (silicon brazing) , brass brazing rod 1/8 (silicon brazing) , brass ferrule connector nut union , brass ferrule size 1/4 as per sample , brass ferrule size 5/16 as per sample , brass nut size 1/4 as per sample , brass nut size 5/16 as per sample , brasso 100 ml. , copper flexible jumper size-12x100mm , copper pipe all sizes , copper revit assorted size , corrugated plastic pipe with nylon thread good qualitysize 1/2 , corrugated plastic pipe with nylon thread good quality size 1/4 , corrugated plastic pipe with nylon thread good quality size 3/4 , cotton waste coloured good quality , cotton waste white good quality , counter shank bolt all size , crc 226 , drum mandrel drive , emery cloth/paper fine 1½ john okay isi , emery cloth/paper fine 2john okay isi , emery cloth/paper rough , essab ruptam-a silber brazing flux , extruded brass rod any sizes , canvas fire house pipe 30 mtr rrl with 5.5 male & female cupline isi 0 mek make , gauge glass for texmaco boiler size 3/4 x 16½ good quality (borosil make) , gauge glass klinger make b-9 with gasket , glass wool , good quality flat belt (patta) ferrodo make size 3 ply x 2 , good quality flat belt (patta) ferrodo make size 4 ply x 2½ , good quality flat belt (patta) ferrodo make size 5 ply x 4 , good quality flat belt (patta) ferrodo make size 6 ply x 5 , good quality flat belt (patta) ferrodo make size 8 ply x 6 , graphite power in 500gm packing , h.t. bolt all size , h.t.nut all size , hexa blade (l.a make) size 1/2 x 12 , hexa blade good quality size 1/2 x 12 other make ----------------- , hexa frame for above , high pressure steel stand class -300 ibr-12 hali , high pressure wire breaded steam hose pipe size 1 indoaction , holdtite liquid compound 500gms (pidilite) , hose clamp 2-1/4 , local rubber hose pipe 2 ply 24mm , index make chain pulley make heavy duty p-series 02 ton x 10 mtr. , j.k. make files & tools , jhalni make pipe wrinch 24 , klinger make high pressure jointing sheet metaliic 3 mm , red lead standard , lead ingot (white) , leatherised paper good quality , lock tight 242 , lock tight 270 , lower plunger for c/f machine , m. seal kg. pack(pidilite) , lr.b. pad heaving density 100 kg, 2 inch thick , m. sealmahindra & mahindra , m.s. flange- (14)” od-533, pcd-476,bore- 350 no. of hole-12, hole size- 22mm, thickness- 20mm , m.s. flange- (2)” (standard size) , m.s. flange- (3)” (standard size) , m.s. flange- (4)” (standard size) , m.s. flange- (6)” od-285, pcd-235, no. of hole-8, hole size- 19mm, bore- 150mm thickness- 12mm , manila rope pully size 3/4 x 2 groove , manila rope pully size 3/4 x 3 groove , manila rope tested quality size 1/2 , manila rope tested quality size 3/4 , markeen cloth , measuring tape 10 mtr , measuring tape 15 mtr , measuring tape 3 mtr , measuring tape 5 mtr , measuring tape-3 mtr , mechanical oil seal with spring sealing (for monoblock pumps) size-(20-31-08) as per sample , metalic oil seal 120-150-15 , metalic oil seal 180-210-15 , metalon sheet standard size , mill hydraulic pipe high pressure od 18 mm, bore 11 mm tested 500 kg/cm2 , moly-kote spray 1000 per metal 225ml. pack , ms bolt best quality all size - inch size , ms bolt best quality all size - mm size , ms bolt with nut inch size , ms bolt with nut mm size , ms connector for hydraulic system , ms counter shank bolt all sizes , ms elbow 1 (forged) , ms elbow 1/2 (forged) , ms elbow 3/8 (forged) , ms flange table e size 6 , ms long bend c class 1 , ms long bend c class 1-1/2 , ms long bend c class 2 , ms long bend c class 2-1/2 , ms longt bend c class 3 , ms long bend c class 4 , ms long bend c class 5 , ms long bend c class 6 , ms long bend c class 7 , ms long bend c class 8 , ms long bend c class 9 , ms long bend c class 10 , ms long bend c class 11 , ms long bend c class 12 , ms per forated sheet size 4 x 8, 10 mm hole x 8 thick , ms pipe msl make high pressure steam pipe (sch. 40) size 6 with ibr certificate , ms plain washer all sizes , ms rivets assorted size , ms short bend c class 1 , ms short bend c class 1-1/2 , ms short bend c class 2 , ms short bend c class 2-1/2 , ms short bend c class 3 , ms short bend c class 4 , ms short bend c class 5 , ms short bend c class 6 , ms short bend c class 7 , ms short bend c class 8 , ms short bend c class 9 , ms short bend c class 10 , ms short bend c class 11 , ms short bend c class 12 , ms split pinall sizechanpion make , ms stud all size , ms union socket 1 heavy duty forged quality , ms union socket 1/2 , ms union socket 1/4 , ms union socket 3/4 , woolen 1/2 , nose mask for welder , nylock nut size ½” , nylock nut size ¾” , nylock nut size 1” , nylock nut size 5/8 , nylock nut size24 mm , nylock nut size 22 mm , oil seal mykoda make all size , old dhoti (cotton) 5 mtr , asbestesleder , painting brush size 1 , painting brush size 2 , painting brush size 3 , painting brush size 4 , painting brush size 5 , painting brush size 6 , piano wire ss , pluge sleeve packing for water gauge sleeve packed type (for valve cock & boiler mountings make-qinn) , plumber block (smr) , polyproplene rope 3/4 tested quality , power master make tube expander suitable 100 mm tube , power master make tube expander suitable 42 mm tube to 45 , power master make tube expander suitable 48 mm tube , power master make tube expander suitable 63 mm tube , power master make tube expander suitable 80 mm tube , power master tube expender with ratchet for 48.4 id x 1.5 mm thik. , pvctransparent pipe good quality size 1” , pvctransparent pipe good quality size 2 , pvctransparent pipe good quality size 3/4 , pvc transparent roller, ø 1”x bore 3/16” as per sample , pvc transparent pipe good quality size 1/2 , quick setting cement fosroc make (25kg.) bag. , ranga , round sight glass grinded & polished in 12 mm thk.x 9 3/4 , round sight glass grinded & polished in 12 mm thk. x 43/4 out dia. , round sight glass grinded & polished in 12 mm thk. x 5 , round sight glass grinded & polished in 12 mm thk. x 7 , round sight glass grinded & polished in 20 mm thk. x 8 ½ , round sight glass grinded & polished in 20 mm thk. x 8¼ , round sight glass grinded & polished in size 12 mm thk. x 4 out dia. , round sight glass grinded & polished in size 12 mm thk. x 6 out dia. , rubber cone for above glage glass , rubber hose pipe standard size 1/2 , rubber hose pipestandard size 1” , rubber hose pipestandardsize 1¼ , rubber hose pipestandard size 1½ , rubber hose pipe dunlop/indo/vardhman size 3/4 , rubber hose pipe dunlop/indo/vardhman size 7/8 , rubber insertion jyoti brand all size , rubber joint black sheet all size , rustolene 500 ml (hard castle) , seamless pipe 12 nb sch 100 wall thickness - 21.44 mm , seamless pipe 4 nb sch 80 wall thickness -8.56 mm , seamless pipe msl make sch-40 size 1 , seamless pipe msl make sch-40 size 1½ , seamless pipe msl make sch-40 size 3/4 , shallac compound 50 gm tube , sight glass 105x10 mm , sight glass 125x19 mm , sight glass 200x15 mm , sight glass 210x15 mm , simplex chains(renynold make) diamond , simplex chains(renynold make) 2 diamond , solonide coil for solonide valve , split pin 1/8 x ½” as per sample champion , split pin 1/8x1/2” as per sample champion , spring steel flat any size , spring washer champion make , ss bolt & nut all sizes 304 grade , ss nut all size inch size/mm size 304 grade , ss rod above 2 size 304 grade , ss rod upto 2 size 202 grade , ss socket 1/2 , ss socket 1/4 , ss stud size 5/8 x 2½ , ss stud size 5/8 x 3 , stainless steel hydrent valve for fire fitting water supply single way flange type , steel wire brush (hand) , straight grinder 4 bosch/raw wolf , taflon rodsize 1¼ x 12 , taflon rod 2x1/2 , taflon rod size 1 x 12 , taflon rod size 1/2 x 12 , taflon rod size 1½ x 12 , teflon rod 2 ½” x 300 mm , thermameter 0-110 red line size 12 long , totem make tap set hss all sizes , tst /sst drill (it make) adision / it , tube expender spares suitable for model-140-a62/2, 2x7-8 g, ½-7/8 t-5 , u clamp 1/2 forged for unloader wire rope , u clamp 3/4 forged for unloader wire rope , usha martin make steel wire rope 3/4 hemp core 6/19 with test certificate , usha martin make steel wire rope 3/4 hemp core 6/37 with test certificate , valve grinding paste fine 400gms (c/u) , valve grinding paste rough 400gms (c/u) , wire breaded rubber house pipe with end connection size 1/2x 1 mtr. long , wire breadedrubber house pipe with end connection size 1/4 x 300 mm long , wire breaded rubber house pipe with end connection size 1/4 x 400 mm long , wire breaded rubber house pipe with end connection size 3/4 x 400 mm long , wire breaded rubber house pipe with end connection size 3/8 x 1 mtr. long , wire breaded rubber house pipe with end connection size 3/8 x 1.5 mtr. long , wire breaded rubber house pipe with end connection size 3/8 x 400 mm long , wire breaded hose with end connection both sides insize 1 x 1000 mm long , wire breaded hose with end connection both sides insize 1 x 500 mm long , wire breaded hose with end connection both sides insize 1/2 x 1000 mm long , wire breaded hose with end connection both sides insize 1/2 x 500 mm long , wire breaded hose with end connection both sides insize 1/4 x 1000 mm long , wire breaded hose with end connection both sides insize 1/4 x 500 mm long , wire breaded hose with end connection both sides insize 1/8 x 1000 mm long , wire breaded hose with end connection both sides insize 3/4 x 1000 mm long , wire breaded hose with end connection both sides insize 3/4 x 500 mm long , wire breadedhose with end connection both sides in size 1/8 x 500 mm long , wire breaded rubber hose pipe steam double braded 1/4 , wire breaded rubber hose pipe steam single wire braded , wolf make tools hand grinder ag 7/straight grinder etc. , wolf make tools spares field/carbon brush/armature , copperroad all size , brass road , hole tight 500 gm

Related Searched Keywords : paint item

List of paint-item Tenders

Get paint item Tender Alert...

Related Searched Keywords : paint item

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us